ATD Tools ATD7340 Service Jack Operating Instructions & Parts Manual

Below you will find brief information for Service Jack ATD7340. The ATD Service Jack is designed to lift, but not support, one end of a vehicle. Immediately after lifting, loads must be supported by a pair of appropriately rated jack stands. This service jack has a unique feature that provides fast, no load lifts to the jacking point.

PDF Download
Document
Service Jack ATD7340 Operating Instructions & Parts Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • 2 ton capacity
  • Low profile design
  • Fast lift
  • Unique release valve
  • Durable construction
  • Easy to operate
  • Includes parts manual
  • One year warranty

Frequently asked questions

The ATD7340 Service Jack has a capacity of 2 tons.

Always use adequately rated jack stands to support the load after lifting. Never work on, under, or around a load supported only by a hydraulic jack.

Turn the handle 1-1/2 turns counterclockwise, remove the oil plug, rapidly pump the handle several times, close the release valve, replace and tighten the oil plug. If efficiency is still low, remove the oil plug, top off the fluid reservoir with hydraulic oil, replace the oil plug, and repeat steps 1-5.
ALP:
Preparing document for printing…
0%