Azoteq IQS7211E EV02 User Guide

IQ Switch®
ProxFusion® Series
Azoteq
IQS7211EEV02A USER GUIDE
IQ Switch® - ProxFusion® Series
Copyright © Azoteq (Pty) Ltd 2024.
All Rights Reserved.
IQS7211EEV02A User Guide
Revision 1.0
Page 1 of 10
February 2024
IQ Switch®
ProxFusion® Series
Azoteq
Table of Contents
IQS7211EEV02A USER GUIDE ....................................................................................................................... 1
INTRODUCTION ....................................................................................................................................... 3
STAMPS .................................................................................................................................................... 4
SETTING UP FOR THE IQS7211E HEADPHONE TRACKPAD ............................................................. 5
SETTING UP FOR THE IQS7211E FLOWER TRACKPAD ..................................................................... 6
REFERENCE DESIGNS ........................................................................................................................... 7
Copyright © Azoteq (Pty) Ltd 2024.
All Rights Reserved.
IQS7211EEV02A User Guide
Revision 1.0
Page 2 of 10
February 2024
IQ Switch®
ProxFusion® Series
Azoteq
Introduction
This user guide describes the operation of the IQS7211EEV02A Evaluation Kit. The EV-Kit consists
of five parts:
➢
➢
➢
➢
IQS7211E Headphone Trackpad x 1
IQS7211E Flower Trackpad x 1
CT210A x 1
IQS7211E Stamp x 2
To visualise raw data from the EV-Kit, the Trackpad board can be interfaced to any personal
computer with USB support, along with the CT210A and the relevant IQS7211E software Graphical
User Interface (GUI) available to download from the Azoteq website. The purpose of the
IQS7211EEV02A EV-Kit is to help application and development engineers in evaluating these IC’s
capabilities. A picture of the evaluation kit is shown below.
Copyright © Azoteq (Pty) Ltd 2024.
All Rights Reserved.
IQS7211EEV02A User Guide
Revision 1.0
Page 3 of 10
February 2024
IQ Switch®
ProxFusion® Series
Azoteq
Stamps
To interface the IQS7211E Stamp to a PC we advise using the CT210A. This EV Kit can be setup
with the following steps:
➢
➢
➢
➢
➢
➢
Download & Install GUI from Azoteq website
Plug the stamp board into the CT210A using the ribbon cable
Connect the CT210A to the PC with a USB cable (use USB data cable only)
Run the IQS7211E GUI (latest version available from the www.azoteq.com website)
Click “Start Streaming” button
GUI should look as follow.
Copyright © Azoteq (Pty) Ltd 2024.
All Rights Reserved.
IQS7211EEV02A User Guide
Revision 1.0
Page 4 of 10
February 2024
IQ Switch®
ProxFusion® Series
Azoteq
Setting up for the IQS7211E Headphone Trackpad
To interface the IQS7211E Headphone Trackpad to a PC we advise using the CT210A. This EV Kit
can be setup with the following steps:
➢
➢
➢
➢
➢
➢
➢
➢
➢
➢
➢
Download IQ7211E GUI from Azoteq website
Install GUI on PC
Plug the Headphone Trackpad into the CT210A using ribbon cable
Connect the CT210A to the PC with a USB cable (use USB data cable only)
Run the IQS7211E GUI (latest version available from the www.azoteq.com website)
Click “Start Streaming” button
“USER SETTINGS”
“EV Kit Modules” tab
Choose picture of “Headphone Trackpad” plugin board
Minimise “Settings” pop-up window
GUI should look as follow.
Trackpad is now active to be evaluated.
Copyright © Azoteq (Pty) Ltd 2024.
All Rights Reserved.
IQS7211EEV02A User Guide
Revision 1.0
Page 5 of 10
February 2024
IQ Switch®
ProxFusion® Series
Azoteq
Setting up for the IQS7211E Flower Trackpad
To interface the IQS7211E Flower Trackpad to a PC we advise using the CT210A. This EV Kit can
be setup with the following steps:
➢
➢
➢
➢
➢
➢
➢
➢
➢
➢
➢
Download IQ7211E GUI from Azoteq website
Install GUI on PC
Plug the Flower Trackpad into the CT210A using ribbon cable
Connect the CT210A to the PC with a USB cable (use USB data cable only)
Run the IQS7211E GUI (latest version available from the www.azoteq.com website)
Click “Start Streaming” button
“USER SETTINGS”
“EV Kit Modules” tab
Choose picture of “Flower Trackpad” plugin board
Minimise “Settings” pop-up window
GUI should look as follow.
Trackpad is now active to be evaluated.
Copyright © Azoteq (Pty) Ltd 2024.
All Rights Reserved.
IQS7211EEV02A User Guide
Revision 1.0
Page 6 of 10
February 2024
IQ Switch®
ProxFusion® Series
Azoteq
Reference Designs
Figure 5-1 IQS7211E Headphone Trackpad Layout
Copyright © Azoteq (Pty) Ltd 2024.
All Rights Reserved.
IQS7211EEV02A User Guide
Revision 1.0
Page 7 of 10
February 2024
IQ Switch®
ProxFusion® Series
Azoteq
Figure 5-2 IQS7211E Flower Trackpad Layout
Copyright © Azoteq (Pty) Ltd 2024.
All Rights Reserved.
IQS7211EEV02A User Guide
Revision 1.0
Page 8 of 10
February 2024
IQ Switch®
ProxFusion® Series
Azoteq
Figure 5-3 IQS7211E QFN20 Stamp Layout
Copyright © Azoteq (Pty) Ltd 2024.
All Rights Reserved.
IQS7211EEV02A User Guide
Revision 1.0
Page 9 of 10
February 2024
IQ Switch®
ProxFusion® Series
Physical
Address
Azoteq
USA
Asia
South Africa
11940 Jollyville
Room 501A, Block A,
Suite 120-S
T-Share International Centre,
Austin
Taoyuan Road, Nanshan District,
1 Bergsig Avenue
Paarl
7646
South Africa
TX 78750
Shenzhen, Guangdong, PRC
USA
Postal
Address
11940 Jollyville
Room 501A, Block A,
Suite 120-S
T-Share International Centre,
Austin
Taoyuan Road, Nanshan District,
TX 78750
Shenzhen, Guangdong, PRC
PO Box 3534
Paarl
7620
South Africa
USA
Tel
+1 512 538 1995
+86 755 8303 5294
ext 808
+27 21 863 0033
Email
[email protected]
[email protected]
[email protected]
Visit www.azoteq.com
for a list of distributors and worldwide representation.
Patents as listed on www.azoteq.com/patents-trademarks/ may relate to the device or usage of the device.
Azoteq®, Crystal Driver, IQ Switch®, ProxSense®, ProxFusion®, LightSense™, SwipeSwitch™, and the
logo are trademarks of Azoteq.
The information in this Datasheet is believed to be accurate at the time of publication. Azoteq uses reasonable effort to maintain the information up-to-date and accurate, but does
not warrant the accuracy, completeness or reliability of the information contained herein. All content and information are provided on an “as is” basis only, without any representations
or warranties, express or implied, of any kind, including representations about the suitability of these products or information for any purpose. Azoteq disclaims all warranties and
conditions with regard to these products and information, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title
and non-infringement of any third party intellectual property rights. Azoteq assumes no liability for any damages or injury arising from any use of the information or the product or
caused by, without limitation, failure of performance, error, omission, interruption, defect, delay in operation or transmission, even if Azoteq has been advised of the possibility of
such damages. The applications mentioned herein are used solely for the purpose of illustration and Azoteq makes no warranty or representation that such applications will be
suitable without further modification, nor recommends the use of its products for application that may present a risk to human life due to malfunction or otherwise. Azoteq products
are not authorized for use as critical components in life support devices or systems. No licenses to patents are granted, implicitly, express or implied, by estoppel or otherwise,
under any intellectual property rights. In the event that any of the abovementioned limitations or exclusions does not apply, it is agreed that Azoteq’s total liability for all losses,
damages and causes of action (in contract, tort (including without limitation, negligence) or otherwise) will not exceed the amount already paid by the customer for the products.
Azoteq reserves the right to alter its products, to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and information, its
products, programs and services at any time or to move or discontinue any contents, products, programs or services without prior notification. For the most up-to-date information
and binding Terms and Conditions please refer to www.azoteq.com.
Copyright © Azoteq (Pty) Ltd 2024.
All Rights Reserved.
IQS7211EEV02A User Guide
Revision 1.0
[email protected]
Page 10 of 10
February 2024