Philips | 21PT1582-75T | Specifications | Philips 21PT1582-75T Specifications

Colour Television
14"/20"/21"
Instructions for use
14PT1582
20PT1582
21PT1582
3139 125 27303
INSTALLATION
2
Positioning of the TV set
•
5 cm
•
5 cm
5 cm
•
•
Place TV set on a solid base (e.g. a TV/Video
cabinet)
Leave at least 5 cm around each side of TV
set for ventilation to avoid over-heating.
Do not place TV set near a radiator or other
sources of heat.
Do not place TV set where it can be exposed
to rain or excessive moisture.
Mains Connection
•
•
For correct mains voltage, refer to type sticker
at the rear of the TV set
Consult your dealer if mains supply is different.
Note : This diagram is not representative of the
actual plug and socket.
Antenna Connections
•
•
Connect the aerial plug to the antenna socket
¬ on the backcover.
Insert the mains plug into a wall socket.
Use of Remote Control
•
•
Insert correct type of batteries into the
compartment.
Ensure the batteries are placed in the right
direction.
Switching on the set
•
•
Press the mains power button to switch on/off
the TV.
If the set is on standby mode (indicator is red),
press STANDBY button on the remote control
to switch on set.
CONNECTING PERIPHERAL EQUIPMENT
3
Equipment such as VCR, Laser disc player, VCD, etc. can be connected to the video and
audio (AV) sockets at the rear of the TV. Switch off mains power of the TV and equipment
before making any connections.
in
Connection for Playback
out
VIDEO
•
AUDIO
Connect the Video Output socket of the
VCR/laser dissc player to the AV “in”
socket at the rear of the TV to playback
programmes.
VCR
OR
Laser
disc
player
in
Connection for recording
out
VIDEO
1. From the TV channel you are watching
AUDIO
•
Connecct input sockets of the VCR to the
Monitor “out” sockets at the rear of the
TV to do recording.
VCR
in
2. From one VCR to another VCR
out
VIDEO
•
Connect the sockets of the VCR which you
wish to record from to the Input sockets at
the rear of the TV.
•
Connect the sockets of the receiving VCR to
the Monitor “out” sockets at the rear of the
TV.
AUDIO
VCR 1
VCR 2
4
FUNCTIONS OF TV FRONT CONTROLS/SOCKETS
INSTALL /
MENU
n
˝
˙
L VOLUME K
VIDEO
¸
˚
14PT1582
¸ CHANNEL ˚
AUDIO
20PT1582
1
2
4
3
6
5
7
INSTALL /
MENU
3
˝
˙
VIDEO
˚
¸
L VOLUME K
n
¸ CHANNEL ˚
21PT1582
AUDIO
1
2
3
4
5
6
7
1. Mains Power button
Switch mains power on or off.
2. Standby light indicator
Indicate red light when standby mode is activated.
3. Remote Sensor
Aim remote control handset at remote sensor when
operating the TV.
4. Headphone socket
Connect headphone jack to socket for personal listening.
5. AV “in” sockets
Connect to Video “out” and Audio “out” sockets of VCR
laser disc player, etc.
6. Volume ˝ / ˙ button
Adjust sound volume louder/softer.
7. Channel ¸ / ˚ button
Select channel in ascending/descending order.
Note : You can enter the main menu by pressing both
the Volume ˝ / ˙ buttons at the same time.
Press Channel ¸ / ˚ button to select items on the menu.
Press Volume ˝ / ˙ button to activate sub-menu.
FUNCTIONS OF REMOTE CONTROL
1. STANDBY
Switch off set temporarily to standby
mode. (The red light indicator lights
up when set is on standby mode). To
switch on set, press STANDBY or any
DIGIT button.
5
1
2
4
5. SMART SOUND
Allows you to access 4 different
types of sound settings and select
your preferred setting.
6. MENU
To display or exit menu from screen.
7. CURSOR UP
Allows you to select the next
item on the menu.
8. CURSOR LEFT
Allows you to access the sub-menus
and adjust the settings.
9. VOLUME + / –
Increases / decreases volume.
10. MUTE
Mutes sound. To restore sound,
press button again.
11. TELETEXT
Not applicable.
SLEEP
1
2
3
4
5
6
7
8
9
SMART
SMART
0
±
5
6
4. DIGIT (0 - 9)
Allows you select a channel. For a
2-digit channel number, the second
digit must be entered before the
“ – “ sign disappears.
OSD
2
3
2. AV
Selects AV channels.
3. OSD (On-Screen Display)
– Displays channel number and
sound transmission mode.
– Allows you to exit menu from screen.
AV
`
INC.
SURR.
MENU
7
8
9
A
CH
H
10
11
b
h
SURF A/CH
4
f
e
FUNCTIONS OF REMOTE CONTROL
2
AV
OSD
SLEEP
12
1
2
3
4
5
6
7
8
13. SMART PICTURE
Allows you to access 4 different types
of picture settings and select your
preferred setting.
SMART
0
13
`
14
INC.
SURR.
MENU
15
16
17
A
b
CH
H
h
12. SLEEPTIMER
Allows you to select a time period after
which the set will switch to standby
mode automatically. You can set the
timer from OFF mode up to a maximum
of 240 minutes.
9
SMART
±
6
SURF A/CH
4
f
e
14. INCREDIBLE SURROUND
Not applicable.
15. CURSOR RIGHT
Allows you to access the sub-menus
and adjust the settings.
16. CURSOR DOWN
Allows you to select the next item
on the menu.
17. CHANNEL + / –
Allows you to select channel in
ascending or descending order.
18
19
18. 4
Not applicable for 4 feature.
19. SURF / ALTERNATE CHANNEL
–
When surf mode is activated through
the main menu, it allows you to select
up to a maximum of 8 channels and
view quickly the selected channels .
–
It also allows you to alternate between
the last viewed channel and the present
channel if alternate channel mode is
activated.
AUTOMATIC TUNING OF THE TV CHANNELS
7
Selecting the language and Automatic Tuning
Press button
MENU
Result on TV Screen
1. Enter main menu.
2
AV
OSD
BLUE MUTE
INSTALLATION
BRIGHTNESS IIIII
COLOUR
IIII
CONTRAST
IIIIIIII
SLEEP
❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙
OFF
É
28
18
38
❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙
1
2
3
4
5
6
7
8
9
SMART
2. Select INSTALLATION.
SMART
0
±
`
SURF
A/CH
BLUE MUTE
OFF
É
INSTALLATION
BRIGHTNESS IIIII
28
COLOUR
IIII
18
INC.
SURR.
MENU
❙ ❙ ❙ ❙ ❙ ❙
❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙
❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙
A
b
CH
H
h
SURF A/CH
4
f
e
3. Enter installation
menu. LANGUAGE
option is highlighted.
OR
LANGUAGE
ENGLISH
É
AUTO STORE
É
SWAP
4. Select your desired
language.
5. Select AUTO STORE.
LANGUAGE
ENGLISH
É
AUTO STORE
É
SWAP
É
SKIP
6. Start automatic tuning.
AUTOSTORE
CHANNEL
7. After tuning is completed,
the installation menu
will appear.
OSD
8. Exit menu from screen.
050 MHZ
1
LANGUAGE
ENGLISH
É
AUTO STORE
É
SWAP
É
SKIP
8
SELECTION OF TV SYSTEM
(Applicable to certain models only)
This feature allows you to select your desired TV system. If AUTO is selected, the respective
colour system will be automatically selected according to the transmission system.
Note : Select another system if reception is poor at AUTO mode.
INC.
SURR.
MENU
INC.
SURR.
MENU
➠
1. Enter main menu.
MENU
➠
INC.
SURR.
4. Press button repeatedly
until MANUAL is selected.
2
OSD
SLEEP
1
2
3
4
5
6
7
8
9
SMART
5. Enter system menu.
SMART
0
±
LANGUAGE
ENGLISH
É
AUTO STORE
É
SWAP
2. Select INSTALLATION. 3. Enter installation mode.
Press button
AV
➠
`
Result on TV Screen
SWAP
SKIP
MANUAL
É
É
É
SYSTEM
AUTO
É
SEARCH 044 MHZÉ
FINE TUNE
I
❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙
INC.
SURR.
MENU
A
b
h
6. Press button repeatedly
to cycle through the
respective transmission
system and select the
desired system.
CH
H
SURF A/CH
4
f
e
SYSTEM
AUTO
É
SEARCH 044 MHZÉ
FINE TUNE
I
❙ ❙ ❙ ❙ ❙ ❙
❙ ❙ ❙ ❙ ❙ ❙
7. Select STORE.
8. Store system.
OSD
9. Exit menu from screen.
FINE TUNE
CHANNEL
STORED
I
❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙
8
9
MANUAL TUNING OF TV CHANNELS
Manual tuning of channels allows you to select your preferred channel number for
every available programme.
INC.
SURR.
MENU
INC.
SURR.
MENU
➠
➠
MENU
INC.
SURR.
➠
LANGUAGE
ENGLISH
É
AUTO STORE
É
SWAP
1. Enter main menu. 2. Select INSTALLATION. 3. Enter installation mode.
Press button
4. Press button repeatedly
until MANUAL is selected.
2
AV
OSD
SLEEP
1
2
3
4
5
6
7
8
`
SYSTEM
AUTO
SEARCH 044 MHZ É
FINE TUNE
I
INC.
SURR.
MENU
b
❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙
6. Select SEARCH.
CH
H
h
É
É
É
5. Enter manual tuning menu.
SMART
0
A
SWAP
SKIP
MANUAL
9
SMART
±
Result on TV Screen
SURF A/CH
4
f
e
7. Start searching for a
transmitting channel.
Searching stops once a
transmitting channel is found.
8. Press button repeatedly until
CHANNEL is selected.
SYSTEM
AUTO
SEARCH 055 MHZ É
FINE TUNE
I
CHANNEL
2
❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙
SEARCH 055 MHZ
FINE TUNE
I
CHANNEL
STORE
É
❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙
1
2
3
4
5
6
7
8
9
9. Key in the desired channel
number.
8
É
0
10. Select STORE.
11. Store tuned channel. To
continue searching for the
next transmitting channel,
repeat steps 7 to 12 again.
OSD
12. Exit menu from screen.
FINE TUNE
CHANNEL
STORED
I
❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙
8
SWAPPING OF CHANNELS
10
This feature allows you to change the channel number to your choice for a particular TV
station.
INC.
SURR.
MENU
➠
INC.
SURR.
MENU
➠
MENU
INC.
SURR.
➠
LANGUAGE
ENGLISH
É
AUTO STORE
É
SWAP
1. Enter main menu. 2. Select INSTALLATION. 3. Enter installation mode.
Press button
Result on TV Screen
4. Select SWAP.
LANGUAGE
ENGLISH
É
AUTO STORE
É
SWAP
É
SKIP
É
MANUAL
2
AV
OSD
SLEEP
1
2
3
4
5
6
8
7
9
SMART
5. Enter swap menu.
SMART
0
±
`
INC.
SURR.
MENU
1
2
3
4
5
6
8
9
7
0
A
6. Key in the desired
channel number
you want to exchange
from in the FROM
column.
FROM
TO
EXCHANGE
3
2
É
FROM
TO
EXCHANGE
3
8
É
CH
H
7. Select TO.
b
h
SURF A/CH
4
f
e
1
2
3
4
5
6
7
8
9
0
8. Key in the programme
number you want to
exchange to in the TO
column.
9. Select EXCHANGE.
10. Activate exchange of
channels.
OSD
11. Exit menu from screen.
FROM
TO
EXCHANGED
3
8
SKIPPING OF CHANNELS
11
This feature allows you to skip channels which have bad or weak TV signal or channels
that you do not watch often. Note : Once a channel is skipped, you cannot have access
to it by the CH (Channel) + or – button. you can only have access to the channel by the
DIGIT (0 - 9) buttons.
➠
INC.
SURR.
MENU
1. Enter main menu
➠
INC.
SURR.
MENU
MENU
INC.
SURR.
SLEEP
1
2
3
4
5
6
7
8
9
SMART
0
`
INC.
SURR.
MENU
AUTO STORE
SWAP
SKIP
MANUAL
É
É
É
É
CHANNEL
SKIP
3
NO
5. Enter skip menu.
SMART
±
Result on TV Screen
4. Press button repeatedly
until SKIP is selected.
2
OSD
LANGUAGE
ENGLISH
É
AUTO STORE
É
SWAP
2. Select INSTALLATION. 3. Enter installation mode.
Press button
AV
➠
1
2
3
4
5
6
7
8
9
6. Key in the channel to
be skipped.
0
A
7. Select SKIP.
CH
H
CHANNEL
SKIP
b
h
SURF A/CH
4
f
e
3
NO
8. Select YES to skip
channel.
CHANNEL
SKIP
CHANNEL
OSD
9. Exit menu from screen.
How to restore skipped channels
1. Repeat steps 1 to 5 as in “Skipping of Channels”.
2. Key in the channel to be restored by the DIGIT (0- 9) button.
3. Select SKIP by the
button.
4. Select NO to restore channel.
OSD
5. Exit menu from screen by the
(OSD) button.
3
YES
DELETED
12
FINE TUNING OF TV CHANNELS
This feature allows you to adjust the picture reception in area of weak reception.
1
2
3
4
5
6
7
8
9
SMART
±
➠
MENU
INC.
SURR.
➠
MENU
INC.
SURR.
➠
SMART
0
SURF
A/CH
BLUE MUTE
OFF
É
INSTALLATION
BRIGHTNESS IIIII
28
COLOUR
IIII
18
❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙
`
❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙
1. Select the channel
2. Enter main menu.
you want to fine-tune.
3. Select INSTALLATION.
Press button
Result on TV Screen
4. Enter installation mode.
2
AV
OSD
LANGUAGE
ENGLISH
É
AUTO STORE
É
SWAP
SLEEP
1
2
3
4
5
6
7
8
9
SMART
5. Press button repeatedly
until MANUAL is selected.
SMART
0
±
`
INC.
SURR.
MENU
A
SWAP
SKIP
MANUAL
É
É
É
CH
H
6. Enter fine tune menu.
SYSTEM
AUTO
É
SEARCH 044 MHZÉ
FINE TUNE
I
❙ ❙ ❙ ❙ ❙ ❙
b
h
SURF A/CH
4
f
e
7. Press button repeatedly
until FINE TUNE is selected.
SYSTEM
AUTO
É
SEARCH 044 MHZÉ
FINE TUNE
I
CHANNEL
8
É
STORE
❙ ❙ ❙ ❙ ❙ ❙
8. Start fine-tuning until desired
picture and sound is obtained.
9. Press button repeatedly until
STORE is selected.
10. Store last fine-tuned status.
OSD
11. Exit menu from screen.
❙ ❙ ❙ ❙ ❙ ❙
FINE TUNE
CHANNEL
STORED
I
❙ ❙ ❙ ❙ ❙ ❙
❙ ❙ ❙ ❙ ❙ ❙
❙ ❙ ❙ ❙ ❙ ❙
8
13
SELECTING / ADJUSTING PICTURE AND SOUND SETTING
The picture and sound menu allow you to make adjustments to the picture and volume level.
1. Press
(MENU) button to enter main menu.
MENU
2. Use the
(CURSOR UP) or
(DOWN) button to select the items in the menu.
3. Do the adjustments or activation by the
(CURSOR LEFT) or
(RIGHT) button.
OSD
4. Press
(OSD) button to exit menu from screen.
Picture menu items
Selection
Brightness
Increase/decrease level
Increase/decrease intensity
Contrast
Increase/decrease level
Sharpness
Increase/decrease level
* Hue
Increase/decrease intensity
* Colour Temp
Choice of 3 settings
* Contrast Plus
On/Off
* Noise Reduce
On/Off
* 4:3 Expand
On/Off
IIIII
IIII
IIIIIIII
IIIIIIII
I
❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙
❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙
❙ ❙ ❙ ❙ ❙ ❙
❙ ❙ ❙ ❙ ❙ ❙
❙ ❙ ❙ ❙ ❙ ❙
❙ ❙ ❙ ❙ ❙ ❙
28
18
38
38
21
➠
Colour
BRIGHTNESS
COLOUR
CONTRAST
SHARPNESS
HUE
HUE
I
21
COL TEMP
NORMAL
CONTRAST PLUS
ON
NOISE REDUCE
OFF
4:3 EXPAND
OFF
❙ ❙ ❙ ❙ ❙ ❙
❙ ❙ ❙ ❙ ❙ ❙
* Hue
Applicable for NTSC programmes only.
* Colour Temp
Allows you a choice of 3 picture settings namely, NORMAL, WARM or COOL.
* Contrast Plus
This feature allows you to optimise the total contrast for improved picture clarity.
* Noise Reduce
Noise Reduce feature helps you to reduce the “noise” (little dots on the picture) from
weak signal broadcast. Activating this feature makes a picture disturbed by “noise”
clearer and sharper.
* 4:3 Expand
4:3 Expand feature allows you to adjust picture with black bar on the top and bottom
to fill up more of the screen. It allows you to optimise the picture display on the screen.
Sound menu items
Selection
Volume
Increase/decrease level
* AVL
On/Off
4:3 EXPAND
VOLUME
IIII
AVL
SLEEPTIMER
CHILD LOCK
❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙
* AVL (Auto Volume Leveller)
Variation in signal conditions can result in a sudden change in volume during
commercial breaks or channel switching. Activating the Auto Volume Leveller
feature enables the volume level to remain at a standard volume level.
OFF
28
ON
OFF
É
14
ACTIVATING THE CHILD LOCK
Lock feature allows you to lock channels which you want to prevent others or your
children from watching programmes you deem undesirable.
You can choose to lock up all the channels or individual channel (up to a maximum of
5 channels).
How to lock channels
Press button
MENU
2
AV
OSD
SLEEP
1
2
3
4
5
6
7
8
Result on TV Screen
1. Enter main menu.
BLUE MUTE
OFF
É
INSTALLATION
BRIGHTNESS IIIII
28
COLOUR
IIII
18
CONTRAST
IIIIIIII
38
❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙
❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙
❙ ❙ ❙ ❙ ❙ ❙
9
SMART
SMART
0
±
2. Press button repeatedly
until CHILD LOCK is
selected.
`
INC.
SURR.
MENU
A
AVL
SLEEPTIMER
CHILD LOCK
CLOCK
SURF
OFF
OFF
É
É
A/CH
CH
H
3. Enter child lock mode.
b
h
SURF A/CH
4
f
e
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
4. Key in access code twice
to enter child lock menu.
Note : Universal access
code is 0711.
5. CHANGE CODE is selected.
Key in your preferred code
(4-digit) if you want to
change to a new code. If
you do not want to change
code, select CHANNEL by
the
button and proceed
to step 7 to lock your
desired channels.
6. Key in the new code the
second time to confirm
change.
ACCESS CODE
X X X -
CHANGE CODE
CHANNEL
LOCK
XXX2
NO
CONFIRM CODE
CHANNEL
LOCK
XXX2
NO
15
.......... ACTIVATING THE CHILD LOCK
Press button
2
AV
OSD
SLEEP
1
2
3
4
5
6
7
8
OR
Result on TV Screen
7. Select ALL if you choose
to lock all the channels.
You can also choose to
lock individual channel
(up to a maximum of 5).
XXXX
ALL
NO
É
CONFIRM CODE
CHANNEL
LOCK
CLEAR ALL
XXXX
ALL
NO
É
9
SMART
SMART
0
±
8. Select LOCK.
`
INC.
SURR.
MENU
A
CH
H
9. Select YES to activate
lock mode.
b
CONFIRM CODE
CHANNEL
LOCK
CLEAR ALL
h
SURF A/CH
4
f
e
CONFIRM CODE
CHANNEL
LOCK
CLEAR ALL
XXXX
ALL
YES
É
OSD
10. Exit menu from screen.
How to unlock channels
If you access any locked channel , a message “ACCESS CODE” will appear. To bypass
the lock mode, key in your personal access code.
Note : If you forget your personal access code, key in the universal code 0711 twice.
1. Repeat step 1 to 4 as in “How to lock channels”.
2. Press
button repeatedly until CLEAR ALL is selected if you want to unlock all
the channels. Press
button to activate unlock mode.
3. If you want only to unlock individual channel, select CHANNEL by the
button
and key in the channel you want to unlock by the
(DIGIT 0 -9) button.
1
2
3
4
5
6
7
8
9
0
4. Select LOCK by the
5. Press
button.
button to select NO to activate unlock mode.
OSD
6. Exit menu from screen by the
(OSD) button.
16
ACTIVATING THE CLOCK
(Applicable to certain versions only)
The Clock feature allows you to set the clock to switch to another channel at a specified
time while you are watching another channel or when the TV is on standby mode.
Note : For the clock to function, the set must not be switched off. Once the set is switched
off, the clock is disabled.
Press button
MENU
1. Enter main menu.
2
AV
OSD
SLEEP
1
2
3
4
5
6
7
8
2. Press button repeatedly
until CLOCK is selected.
9
SMART
SLEEPTIMER
CHILD LOCK
CLOCK
SURF
BLUE MUTE
OFF
É
É
A/CH
OFF
3. Enter clock menu.
SMART
0
±
`
INC.
SURR.
MENU
1
2
3
4
5
6
7
8
9
0
A
b
Result on TV Screen
CH
H
h
SURF A/CH
4
f
e
4. Set clock. Key in the time
you want the clock to start
functioning. For example,
if the time is 18 : 30, key
digit 1 and 8 in the hour
column followed by digit 3
and 0 in the minute column.
TIME
18:30
TIMER ACTIVE
OFF
CHANNEL
2
5. Select TIMER ACTIVE.
6. Select ON to activate clock.
TIME
18:30
TIMER ACTIVE
ON
CHANNEL
2
AT
--:--
7. Select CHANNEL.
8. Select the channel you
want to switch to.
TIME
18:30
TIMER ACTIVE
ON
CHANNEL
8
AT
--:--
9. Select AT.
1
2
3
4
5
6
7
8
9
10. Key in the time you want
the channel to be switched
on.
0
OSD
11. Exit from menu.
TIMER ACTIVE
ON
CHANNEL
8
AT
22:30
17
ACTIVATING THE SLEEPTIMER / BLUE MUTE
Sleeptimer feature
This feature allows you to select a time period after which the set will switch to standby
mode automatically. You can set the timer from OFF mode up to a maximum of 240 minutes.
How to activate the Sleeptimer feature
Press button
Result on TV Screen
2
AV
OSD
SLEEP
1
2
3
4
5
6
7
8
VOLUME
IIII
AVL
SLEEPTIMER
CHILD LOCK
CLOCK
2. Press button repeatedly
until SLEEPTIMER is selected.
9
SMART
0
±
1. Enter main menu.
❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙
SMART
28
ON
OFF
É
É
`
INC.
SURR.
MENU
A
h
3. Press button repeatedly to
cycle through the time periods
and select the desired time
period.
CH
H
b
MENU
SURF A/CH
4
f
e
VOLUME
IIII
AVL
SLEEPTIMER
CHILD LOCK
CLOCK
❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙
28
ON
15
É
É
OSD
4. Exit menu from screen.
Blue Mute feature
The TV screen will turn blue when the Blue Mute feature is activated via the main menu.
It indicates that there is no signal.
How to activate the Blue Mute feature
2
AV
OSD
1
2
3
4
5
6
8
7
Press button
MENU
9
SMART
1. Enter main menu.
2. Press button repeatedly until
BLUE MUTE is selected.
SMART
0
±
`
CLOCK
SURF
A/CH
BLUE MUTE
OFF
É
INSTALLATION
BRIGHTNESS IIIII
28
❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙
INC.
SURR.
MENU
A
3. Select ON to activate
Blue Mute feature.
CH
H
OSD
SURF A/CH
b
Result on TV Screen
SLEEP
h
f
4
e
CLOCK
SURF
A/CH
BLUE MUTE
ON
É
INSTALLATION
BRIGHTNESS IIIII
28
❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙
4. Exit menu from screen.
18
USING THE SURF FEATURE
This feature allows you to create a surf list. You can select up to a maximum of 8 channels
and view quickly the selected channels by the control handset.
How to add a channel to the surf list
Press button
Result on TV Screen
1. Enter main menu.
MENU
2
AV
OSD
SLEEP
1
2
3
4
5
6
7
8
2. Press button repeatedly
until SURF is selected.
9
SMART
3. Select SURF option.
After selection of surf option,
exit menu from screen by
OSD
the
(OSD) button.
SMART
0
±
`
INC.
SURR.
MENU
A
CH
H
1
2
3
4
5
6
8
9
7
b
h
SURF A/CH
4
f
e
4. Key in the channel number
you want to add to the surf
list.
CHILD LOCK
CLOCK
SURF
BLUE MUTE
INSTALLATION
É
É
A/CH
OFF
É
CHILD LOCK
CLOCK
SURF
BLUE MUTE
INSTALLATION
É
É
SURF
OFF
É
8
0
SURF A/CH
f
5. Add selected channel to the
surf list. “ADDED” will appear
indicating that the selected
channel has been added.
Repeat steps 4 and 5 to add
more channels to the surf list.
8
ADDED
How to delete a channel from the surf list
1. Select the channel you want to delete from the surf list by
the DIGIT (0 - 9) button.
SURF A/CH
2. Press the
of channel.
f
(SURF / A/CH) button to activate deletion
3. Repeat the above step 1 to 2 if you want to delete more
channels from the surf list.
How to view channels from the Surf list
SURF A/CH
1. Press the f (SURF / A/CH) button repeatedly to cycle through
the channels and select the channel you want to view.
8
DELETED
USING THE ALTERNATE CHANNEL FEATURE
19
When you are viewing a channel and decide to view the previous channel, use this
feature to alternate between the two channels.
How to activate the Alternate Channel feature
Press button
MENU
1. Enter main menu.
2
AV
OSD
SLEEP
Result on TV Screen
BLUE MUTE
OFF
É
INSTALLATION
BRIGHTNESS IIIII
28
COLOUR
IIII
18
CONTRAST
IIIIIIII
38
❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙
❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙
❙ ❙ ❙ ❙ ❙ ❙
1
2
3
4
5
6
7
8
9
SMART
2. Press button repeatedly
until SURF is selected.
SMART
0
±
`
INC.
SURR.
MENU
A
CH
H
3. Select A/CH (Alternate
Channel) option.
b
h
CHILD LOCK
É
É
CLOCK
SURF
SURF
BLUE MUTE
OFF
É
INSTALLATION
SURF A/CH
4
f
e
OSD
4. Exit menu from screen.
SURF A/CH
f
5. Alternate between the
present channel and the
previous channel.
CHILD LOCK
É
É
CLOCK
SURF
A/CH
BLUE MUTE
OFF
É
INSTALLATION
SMART PICTURE AND SOUND
20
Smart Picture
Smart Picture offers you a choice of 4 settings – RICH, NATURAL, SOFT and PERSONAL.
SMART
2
AV
OSD
SLEEP
1
2
3
4
5
7
8
SMART
6
• Press ` (SMART PICTURE)
button repeatedly to cycle
through the 4 settings to select
your desired picture setting.
RICH
9
SMART
0
±
NATURAL
`
SOFT
Definition of Picture Settings
RICH
: Emphasizes very vibrant colours.
(Suitable for AV mode in brightly-lit condition)
: Emphasizes natural and original colours.
: Emphasizes warm colours.
(Suitable for dimly-lit room condition and gives
cinema-like effect when light is switched off)
: Settings are set to your preference.
NATURAL
SOFT
PERSONAL
PERSONAL
Smart Sound
Smart Sound offers you a choice of 4 settings – THEATRE, MUSIC, VOICE and NORMAL.
SMART
2
AV
OSD
SLEEP
1
2
3
4
5
6
7
8
SMART
±
• Press ± (SMART SOUND)
button repeatedly to cycle
through the 4 settings to select
your desired sound setting.
THEATRE
9
SMART
0
`
MUSIC
Definition of Sound Settings
THEATRE
MUSIC
VOICE
NORMAL
: Emphasizes sensation to action and a
wider sound ambience.
: Emphasizes bass frequency making
the music dynamic.
: Emphasizes treble frequency making
speech clearer.
: Normal tone (No boosting).
VOICE
NORMAL
GENERAL INFORMATION / BEFORE CALLING SERVICE
Safety
21
Disconnect mains plug when :
– the red light below the TV screen is flashing continuously.
– a bright white line is displayed across the screen.
– cleaning the TV screen. Never use abrasive cleaning agents. Use a slight damp
chamois leather or soft cloth.
– there is a lightning storm.
– the set is left unattended for a prolonged period of time.
Useful Tips
• Do not place your TV set under direct sunlight or heat.
• Avoid placing your set (e.g. near the window) where it is likely to be exposed to rain
or water.
• Do not leave your set on standby mode for a prolonged period of time. Switch off set
to allow it to be demagnetise. A demagnetised set supports good picture quality.
• Do not shift or move the set around when it is switched on. Uneveness in colour in
some parts of the screen may occur.
• Never attempt to repair a defective TV yourself. Always consult a skilled service personnel.
Before calling Service
Make these simple checks before calling for service. Some of these symptoms can easily
be rectified if you know what to do.
Symptom
What you should do
Colour patch
(uneveness)
• Switch off the TV by the mains power button. Wait for 20
minutes before switching on again.
• Check the TV is not placed too near speakers or magnetic
objects.
No power
• Check the TV’s AC power cord is plugged into the mains
socket. If there is still no power, disconnect plug. Wait for
60 seconds and re-insert plug. Switch on the TV again.
• Check the antenna connection at the rear of the TV.
• Possible TV station problem. Try another channel.
No picture
Good picture
but no sound
• Try increasing the volume.
• Check that the sound is not muted. If it is muted, press the
H (mute) button on the remote control to restore sound.
Good sound but poor
colour or no picture
• Try increasing the contrast and brightness setting.
Snowish picture and
noise
Horizontal dotted lines
• Check antenna connection at the rear of the TV.
Double images or
“Ghost” images
• Possible poor positioning of antenna. Using a highly
directional antenna may improve reception.
TV not responding to
remote control handset
• Check life span of batteries of remote control handset.
• Aim remote control handset directly at remote control
sensor lens on the TV.
Message “ACCESS CODE”
shown on TV. Cannot
access to locked channel.
• Key in your personal access code to unlock channel. If you
have forgotten your code, key in the universal code 0711
twice. For more details, refer to section on “How to unlock
channels”.
• Possible electrical interference e.g. hairdryer, vacuum
cleaner, etc. Switch off appliances.
SPECIFICATIONS
22
14PT1582
20PT1582
21PT1582
Picture tube size
37 cm
51 cm
54 cm
Picture tube visible area
34 cm
48 cm
51 cm
Audio Output
1x3W
2x2W
2x2W
Set dimensions
Width
Height
Depth
36 cm
36 cm
37 cm
50 cm
46 cm
47 cm
52 cm
47 cm
48 cm
Nett weight of set
11 kg
18 kg
20 kg
TV System
Versions
57
PAL B/G
59
73
x
PAL D/K
x
PAL I
x
75
x
x
x
SECAM B/G
x
SECAM D/K
x
SECAM K1
x
NTSC Playback
x
x
x
x
PAL 60 Playback
x
x
x
x
Note
For Operating Voltage, Frequency, Power Consumption and Version Number, refer to
the type sticker at the rear of the set.
www.philips.com
Download PDF