Bosch | LTC 4600 Series | LTC 4600 and 4700 Series Fiber Optics

Video | LTC 4600 and 4700 Series Fiber Optics
LTC 4600 and 4700 Series Fiber Optics
www.boschsecurity.com
The Bosch Fiber Optic Series are transmission
products that provide efficient, high quality video and
data transmission via fiber optic cable. Fiber optic
signals are immune to ground loops, radio frequency
interference (RFI), electromagnetic interference (EMI),
and cross talk because the video carrier is infrared
light and is transmitted through a nonconductive fiber
optic cable. Interference-free operation ensures
reliable service. Unlike microwave, wire, and coaxial
cable transmission systems, fiber optic transmission is
difficult, if not impossible to tap. And, since fiber optic
cable is nonconductive and does not radiate a signal, it
is difficult to detect and locate. These compact
devices are available in a surface mount enclosure or
in a modular style package that can be rack-mounted
using an optional EIA 48 cm (19 in.) compatible rack
unit.
Model Summary
Model No.
Description/Use
LTC 4641, LTC 4642 Series
Single-channel Video Transmissions
LTC 4744, LTC 4745 Series
4-Channel Video Transmissions
LTC 4628, LTC 4629 Series
Video/Bi-Phase Data Transmissions
u
Video and data models available
u
No adjustments required
u
Long distance–high security
u
Surface-mount or rack-mount units
u
Video models support NTSC, PAL, and SECAM
standards
LTC 4671 Series
RS-485 Allegiant/ Divar/System4
Keyboard Data Transmissions
LTC 4651 Series
RS-232/ Bi-Phase Data
Transmissions
LTC 4637 Series
Card Cage Enclosure for Rack-mount
Models
Functions
Compatibility
Bosch Product
Bosch Fiber Optics Series
AutoDome with VG4-SFIBER-MM
LTC 4629 Series
Unity Pack Series KBE-xxxx-xxF
LTC 4642 Series
IntuiKey Series Keyboards
LTC 4671 Series
LTC 5136 Controller
LTC 4651 Series
2 | LTC 4600 and 4700 Series Fiber Optics
Certifications and approvals
1
Camera
Electromagnetic
Compatibility (EMC)
Complies with FCC Part 15, ICES-003
and CE regulations
2
Bosch KBE-xxxx-xxF pre-packaged camera
3
Coax Cable
Product Safety
Complies with CE regulations, UL,
CSA, EN and IEC Standards
4
Fiber Optic Video Transmitter
Laser Diode Models
Comply with FDA performance
Standard for Laser Products, Title 21;
Code of Federal Regulations
Subchapter J
5
Fiber Optic Cable: Up to 4 km (2.5 miles) using 62.5/125 micron
6
Fiber Optic Video Receiver
Region
Certification
Europe
CE
Installation/configuration notes
LTC 4641 and LTC 4642 Series
The LTC 4641 Series Transmitters and LTC 4642
Series Receivers are designed for transmission of
CCTV analog video signals. Efficient installation is
assured because there are no user adjustments
required. The wide bandwidth transmission capability
of these units enables clear, sharp black and white or
color pictures to be transmitted over long distances.
The compact transmitters are small enough to be
connected directly to a camera’s BNC connector,
thereby simplifying installation.
LTC 4641 and LTC 4642 Series video transmission
LTC 4641 and LTC 4642 Series
Models
No.
Description
Power Source2
Requires
LTC 46
41/60
Mini Video
Transmitter
120-230 VAC,
50/60 Hz
LTC 4642 Series
Receiver
LTC 46
42/60
Video Receiver
120-230 VAC,
50/60 Hz
LTC 4641 Series
Transmitter
LTC 46
42/00
Video
Receiver, Rack
Module
LTC 4637 Rack
LTC 4641 Series
Transmitter
2 Appropriate external power pack supplied with surface-mount models or power provided by
LTC 4637 rack unit for rack-mount models.
Specifications
Power Requirements Transmitter
(surface-mount versions only)
9–12 VDC @ 150 mA;
10–14 VAC @ 200 mA
Power Requirements Receiver
(surface-mount versions only)
12 VDC @ 150 mA
Number of Fibers
One (1)
Optical Budget
14 dB
Maximum Distance
4 km (2.5 miles)
Wavelength
850 nm
Optical Emitter
LED
Transmitter Output Power
25 uW (–16 dBm)
Technology Type
AM modulation, with AGC
Rack Slots Required when used
with LTC 4637 Rack
One (1),
(rack-mount version only)
Video Bandwidth
5 Hz to 10 MHz
Differential Gain
< 5%
Differential Phase
< 5°
Tilt
< 1%
Signal-to-Noise Ratio (SNR)
> 55 dB @ 10 dB attenuation
> 60 dB @ 7 dB attenuation
Shipping Weight
< 0.9 kg (2 lb)
MTBF
> 100,000 hours
3 | LTC 4600 and 4700 Series Fiber Optics
Transmitter
Dimensions
Transmitter (L x W x H)
(surface-mount version)
6.4 x 4.1 x 2.5 cm
(2.5 x 1.6 x 1.0 in.)
Receiver (L x W x H)
(surface-mount version)
10.7 x 8.9 x 2.5 cm
(4.2 x 3.5 x 1.0 in.)
LTC 47
45/00
4-ch. Video
Receiver
Rack Module
LTC 4637
Rack
LTC 4744
Series
Transmitter
2 Appropriate external power packs supplied with surface-mount models or power provided by
LTC4637 rack unit for rack-mount models.
LTC 4744 and LTC 4745 Series
The LTC 4744 Transmitter and LTC 4745 Receiver are
designed for the transmission of up to 4 CCTV analog
video signals using one multimode fiber cable. This
link operates in the 1310 nm range and incorporates 8bit video encoding exceeding the requirements of EIA
RS-250C for Medium Haul video transmissions.
Integral LED status indicators provide an indication of
operating parameters.
Specifications
Power Requirements
Transmitter and Receiver
(surface-mount versions only)
+12 VDC @ 500 mA
Number of Fibers
One (1)
Optical Budget
17 dB
Maximum Distance
3 km (1.9 miles)
Wavelength
1310 nm
Optical Emitter
Laser diode
Technology Type
8-Bit digital video encoding
Rack Slots Required when used
with LTC 4637 Rack
Two (2), rack-mount version only
Video Bandwidth
10 Hz to 6.5 MHz
Differential Gain
< 2%
Differential Phase
< 0.7°
Tilt
< 1%
Signal-to-Noise Ratio (SNR)
60 dB @ maximum optical loss
budget
Shipping Weight
< 0.9 kg (2 lb)
LTC 4744 and LTC 4745 Series – 4 channel video
transmission
MTBF
> 100,000 hours
1
Camera
Dimensions
2
Coax Cable
3
Fiber Optic Video Transmitter
Transmitter (L x W x H)
(surface-mount versions)
17.8 x 12.5 x 2.5 cm
(7.0 x 4.9 x 1.0 in.)
4
Fiber Optic Cable: Up to 3 km (1.9 miles) using 62.5/125 micron
Multimode Fiber Optic Cable
Receiver (L x W x H)
(surface-mount versions)
17.8 x 12.5 x 5.0 cm
(7.0 x 4.9 x 2.0 in.)
5
Fiber Optic Video Receiver
6
Video Quad Unit
LTC 4744 and LTC 4745 Series
Models
No.
Description
Power Source2
Requires
LTC 47
44/60
4-ch. Video
Transmitter
120-230 VAC,
50/60 Hz
LTC 4745
Series
Receiver
LTC 47
44/00
4-ch. Video
Transmitter
Rack Module
LTC 4637
Rack
LTC 4745
Series
Receiver
LTC 47
45/60
4-ch. Video
Receiver
120-230 VAC,
50/60 Hz
LTC 4744
Series
LTC 4628 and LTC 4629 Series
The LTC 4628 and LTC 4629 are a bidirectional
transmission system designed to implement a
complete CCTV system using a single optical fiber
cable. This system independently transmits an analog
video signal from the camera location to the controller
location, while simultaneously transmitting Bosch BiPhase control code from the controller location to the
camera location. The video channel is compatible with
monochrome or color cameras. The data channel is
compatible with control systems that utilize Bosch BiPhase, simplex RS-232, or RS-422 signals. Both units
incorporate LED indicators to provide quick visual
indication of the module performance.
4 | LTC 4600 and 4700 Series Fiber Optics
LTC 4628 and LTC 4629 Series – video/data
transmission
1
AutoDome Series Pan/Tilt/Zoom Camera
2
Bi-Phase Control Data Cable
3
Fiber Optic Transceiver
4
Fiber Optic Cable: Up to 4 km (2.5 miles) using 62.5/125 micron
Multimode Fiber Optic Cable
5
Allegiant Series Switcher/Controller, Divar Digital Video Recorder,
or System4 Series Multiplexer
6
IntuiKey Series Keyboard
7
Bi-Phase Control Data Cable
8
Video
Number of Fibers
One (1)
Optical Budget
14 dB
Maximum Distance
4.0 km (2.5 miles)
Technology Type
AM Video modulation
Wavelength
850 nm / 1310 nm
Optical Emitter
LED
Transmitter Output Power
25 uW (–16 dBm)
Rack Slots Required (when used with
LTC 4637 Rack)
One (1), rack-mount
version only
Video Bandwidth
5 Hz to 10 MHz
Differential Gain
< 5%
Differential Phase
< 5°
Tilt
< 1%
Signal-to-Noise Ratio (SNR)
> 55 dB @ 10 dB
attenuation
> 60 dB @ 7 dB
attenuation
Data Rate
DC to 100 kbps (NRZ)
Shipping Weight
< 0.9 kg (2 lb)
MTBF
> 100,000 hours
Dimensions
L x W x H (surface-mount versions)
LTC 4628 and LTC 4629 Series
Models
No.
Description
Power Source2
Requires
LTC 46
28/60
Video/Data
Transceiver
120-230 VAC,
50/60 Hz
LTC 4629 Series
Transceiver
LTC 46
28/00
Video/Data
Transceiver
Rack Module
LTC 4637 Rack
LTC 4629 Series
Transceiver
LTC 46
29/60
Data/Video
Transceiver
120-230 VAC,
50/60 Hz
LTC 4628 Series
Transceiver
LTC 46
29/00
Data/Video
Transceiver
Rack Module
LTC 4637
Rack
LTC 4628 Series
Transceiver
2 Appropriate external power pack supplied with surface-mount models or power provided by LTC 4637 rack unit for
rack-mount models.
Specifications
Power Requirements LTC 4628
(surface-mount versions only)
24 VAC C.T. ,
11–14 VDC @ 200 mA
Power Requirements LTC 4629
(surface-mount versions only)
12 VDC @ 200 mA
17.8 x 12.5 x 2.5 cm
(7.0 x 4.9 x 1.0 in.)
LTC 4671 Series
The LTC 4671 Series are Transceivers designed
especially for the transmission of RS-485 signals used
by system keyboards in the Allegiant Series of
switcher/controller systems, the Divar Series of digital
video recorders, and the System4 Series of
multiplexers. The unit contains both a transmitter and
a receiver operating in the 850 nm range to allow
bidirectional communication using two fibers between
the main control site and its remote keyboard.
5 | LTC 4600 and 4700 Series Fiber Optics
Data Rate
DC to 150 kbps
Shipping Weight
< 0.9 kg (2 lb)
MTBF
> 100,000 hours
Dimensions
L x W x H (surface-mount versions)
BOSCH
Prod
Mon
Clr
Shot
1
2
3
4
5
6
7
8
9
0
LTC 4671 Series – keyboard data transmission
1
Allegiant Series Switcher/Controller, Divar Digital Video Recorder,
or System4 Series Multiplexer
2
Separate Video Signal Transmission Link
3
Fiber Optic Data Transceiver
4
Up to 4 km (2.5 miles) using 62.5/125 micron Multimode Fiber
Optic Cables
5
Keyboard Data
6
IntuiKey Series Keyboard
17.8 x 12.5 x 2.5 cm
(7.0 x 4.9 x 1.0 in.)
LTC 4651 Series
The LTC 4651 Transceivers are designed especially for
the transmission of Bosch Bi-Phase control code
signals used in the Allegiant Series of switcher/
controllers, various DVRs, multiplexers, and other
camera control systems. They are also compatible with
Manchester code and standard RS-232 signals. These
units operate in the 850 nm range and contain a
removable screw terminal type connector that allows
easy connection to the shielded twisted pair cable
carrying the control signal. These units can also be
used as an RS-232C transceiver that is compatible
with EIA Standard RS-232C levels. The system is
suitable for simplex asynchronous data transmissions
using one fiber, or full duplex asynchronous data
transmissions using two fibers up to 64 kbaud.
LTC 4671 Series
Models
No.
Description
Power Source2
Requires
LTC 46
71/60
RS-485
Transceiver
120-230 VAC,
50/60 Hz
LTC 4671 Series
Transceiver
LTC 46
71/00
RS-485
Transceiver
Rack Module
LTC 4637 Rack
LTC 4671 Series
Transceiver
2 Appropriate external power pack supplied with surface-mount models or power provided by LTC 4637 rack unit for
rack-mount models.
Specifications
Power Requirements (surface-mount
versions only)
12 VDC @ 200 mA
Number of Fibers
LTC 4651 Series – RS232 data transmission
1
AutoDome Series Pan/Tilt/Zoom Camera
Two (2)
2
Separate Video Signal Transmission Link
Optical Budget
14 dB
3
Bi-Phase Control Data Cable
Maximum Distance
4.0 km (2.5 miles)
4
Fiber Optic Data transceiver
Wavelength
850 nm
5
Up to 3.5 km (2 miles) using 62.5/125 micron Multimode Fiber
Optic Cable
Optical Emitter
LED
6
Controller Junction Box
Transmitter Output Power
25 uW (–16 dBm)
7
Bi-Phase Control Data Cable
Rack Slots Required (when used with
LTC 4637 Rack)
One (1), rack-mount
version only
8
Data
6 | LTC 4600 and 4700 Series Fiber Optics
9
slot. This design eliminates the possibility of a singlepoint failure causing a complete shut down of the
entire rack. The current limiting function is also selfresetting, should the fault or overload be of a
temporary or intermittent nature.
Controller
LTC 4651 Series
Models
No.
Description
Power Source2
Requires
LTC 46
51/60
Bi-Phase/RS-232
Transceiver
120-230 VAC,
50/60 Hz
LTC 4651
Series
Transceiver
LTC 46
51/00
Bi-Phase/RS-232
Transceiver, Rack
Module
LTC 4637 Rack
LTC 4651
Series
Transceiver
LTC 4637/60
power supply
Power
B OS CH
2 Appropriate external power pack supplied with surface-mount models or power provided by LTC 4637 rack unit for
rack-mount models.
LTC 4637
Specifications
Power Requirements (surface-mount
versions only)
12 VDC @ 150 mA
Number of Fibers
One (1) for Bi-Phase and
simplex RS-232
transmissions;
Two (2) for duplex
RS-232 transmissions
LTC 4637 Series Rack
Models No.
Input
Voltage
Voltage
Range
Output
Voltage
Max
Power3
LTC 4637/60
120 VAC,
50/60 Hz
108 to 132
20 VAC
80 W
LTC 4637/50
230 VAC,
50/60 Hz
198 to 264
20 VAC
80 W
Optical Budget
14 dB
Maximum Distance
3.5 km (2 miles)
Wavelength
850 nm
Optical Emitter
LED
Transmitter Output Power
25 uW (–16 dBm)
3 Maximum power dissipation (fully loaded).
Rack Slots Required (when used with
LTC 4637 Rack)
One (1), rack-mount
version only
Specifications
Data Rate
DC to 1.5 Mbps (NRZ)
Construction
Shipping Weight
< 0.9 kg (2 lb)
Modular style aluminum enclosure,
with detachable IEC type AC power
connector
MTBF
> 100,000 hours
Number of Slots
14
Indicators
Power supply pilot lamp
Power Supplied to Modules
20 VAC, Center tapped @ 4.0 A
Fusing
One (1) slow-blow for rack power
supply; modules individually
electronically fused
Connectors
AC line cord; 3-terminal adaptor
sockets, per slot
Shipping Weight
< 2.15 kg (< 5 lb)
Dimensions
L x W x H (surface-mount versions)
10.7 x 8.9 x 2.5 cm
(4.2 x 3.5 x 1.0 in.)
LTC 4637 Series Rack
The LTC 4637 Series Rack Units provide the option to
rack-mount LTC 4600 Series Fiber Optic Modules in a
standard EIA 48 cm (19 in.) rack. The unit incorporates
an integral power supply that supplies power to all
modules installed in the rack-mount unit. The supply
also utilizes a standard IEC AC power connector for
easy power cord replacement or exchange with
various worldwide AC power plug configurations.
Modules installed in the rack-mount unit can be hotswapped, so it is not necessary to power down the
rack when removing or replacing modules. The integral
power supply incorporates an automatic electronic
current limiting feature for each individual rack-mount
Dimensions
LxWxH
48.3 x 17.8 x 13.3 cm
(19.0 x 7.0 x 5.25 in.)
7 | LTC 4600 and 4700 Series Fiber Optics
Technical specifications
LTC 4629/00 Data/Video Transceiver, Rack Module
850 nm FOM, use with LTC 4637 series rack
Common Specifications
Order number LTC 4629/00
NOTE: Specifications noted below apply to all models unless otherwise specified in applicable model section.
LTC 4630/50 Video Transmitter/Data Transceiver
Optical Connector Type
ST (most modules)
850/1310 nm FOM, side A, 230 VAC, 50/60 Hz
Optical Fiber
Compatibility
50/125 µm or 62.5/125 µm, graded
index multimode glass fiber rated for a
minimum bandwidth of 600 MHz-Km.
For 50/125 fiber, subtract 4 dB from
the specified optical budget value.
850/1310 nm FOM, side A, 120 VAC, 50/60 Hz
Optical Distance
Specifications
Specified transmission distances are
limited to the optical loss of the fiber
and any additional loss introduced by
connectors, splices, and patch panels.
The modules are designed to operate
over the entire optical loss budget
range, so they do not require a
minimum loss in order to operate.
Data and Power
Connections
Removable screw terminal blocks
Construction
Surface-mountable metal enclosure
designed to maximize
EMI/RFI shielding
Environmental
Operating Temperature
Order number LTC 4630/50
LTC 4630/60 Video Transmitter/Data Transceiver
Order number LTC 4630/60
LTC 4631/50 Video + Bilinx Fiber Receiver
850/1310 nm FOM, side B, 230 VAC, 50/60 Hz
Order number LTC 4631/50
LTC 4631/60 Video + Bilinx Fiber Receiver
850/1310 nm FOM, side A, 120 VAC, 50/60 Hz
Order number LTC 4631/60
LTC 4631/00 Video + Bilinx Fiber Receiver, Rack Module
850/1310 nm FOM, side B, use with LTC 4637 series
rack
Order number LTC 4631/00
LTC 4637/50 Rack and Power Supply
for FOM, 48 cm (19 in.), 230 VAC, 50 Hz
Order number LTC 4637/50
–40°C to 74°C (–40°F to 165°F)
Storage Temperature
–40°C to 85°C (–40°F to 185°F)
Humidity
0% to 95% relative, non-condensing
LTC 4637/60 Rack and Power Supply
for FOM, 48 cm (19 in.), 110 VAC, 60 Hz
Order number LTC 4637/60
LTC 4641/60 Mini Video Transmitter
Accessories
850 nm FOM, video signals, 120-230 VAC, 60 Hz
LTC 4600/00 blank panel (1 rack slot). Used to cover unused slots in
LTC 4637 Series racks.
Order number LTC 4641/60
Replacement Power Supply Part Numbers
850 nm, 120-230 VAC, 60 Hz
UPA-1509-60
For 120 VAC, 50/60 Hz models
UPA-1509-50
For 230 VAC, 50/60 Hz models
Ordering information
LTC 4600/00 Blank Panel
to cover one slot of the LTC 4637 48-cm (19-in.) rack
Order number LTC 4600/00
LTC 4628/60 Video/Data Transceiver
850 nm FOM, 120-230 VAC, 60 Hz
Order number LTC 4628/60
LTC 4628/00 Video/Data Transceiver, Rack Module
850 nm FOM, receives data, use with LTC 4637 series
rack
Order number LTC 4628/00
LTC 4629/60 Data/Video Transceiver
850 nm FOM, 120-230 VAC, 60 Hz
Order number LTC 4629/60
LTC 4642/60 Video Receiver
Order number LTC 4642/60
LTC 4642/00 Video Receiver, Rack Module
850 nm FOM, video signals, use with LTC 4637 series
rack
Order number LTC 4642/00
LTC 4651/60 Bi-Phase/RS-232 Transceiver
850 nm, FOM, 120-230 VAC, 60 Hz
Order number LTC 4651/60
LTC 4651/00 Bi-Phase/RS-232 Transceiver, Rack Module
850 nm FOM, use with LTC 4637 series rack
Order number LTC 4651/00
LTC 4671/60 RS-485 Transceiver
850 nm, 120-230°VAC, 60 Hz
Order number LTC 4671/60
LTC 4671/00 RS-485 Transceiver, Rack Module
850 nm FOM, use with LTC 4637 series rack
Order number LTC 4671/00
8 | LTC 4600 and 4700 Series Fiber Optics
LTC 4681/50 Ethernet Transmitter
1310/1550 nm FOM, side A, 10/100 Base-T Ethernet,
230 VAC, 50/60 Hz
Order number LTC 4681/50
LTC 4681/60 Ethernet Transmitter
1310/1550 nm FOM, side A, 10/100 Base-T Ethernet,
120 VAC, 50/60 Hz
Order number LTC 4681/60
LTC 4681/00 Ethernet Transmitter, Rack Module
10/100 Base-T Ethernet, use with LTC 4637 series rack
Order number LTC 4681/00
LTC 4682/50 Ethernet Receiver
1310/1550 nm FOM, side B, 10/100 Base-T Ethernet,
230 VAC, 50/60 Hz
Order number LTC 4682/50
LTC 4682/60 Ethernet Receiver
1310/1550 nm FOM, side B, 10/100 Base-T Ethernet,
120 VAC, 50/60 Hz
Order number LTC 4682/60
LTC 4682/00 Ethernet Receiver, Rack Module
1310/1550 nm FOM, side B, 10/100 Base-T Ethernet,
use with LTC 4637 series rack
Order number LTC 4682/00
LTC 4744/60 Transmitter
1310 nm FOM, 4 channel, video signals, 120-230 VAC,
50/60 Hz
Order number LTC 4744/60
LTC 4744/00 Transmitter, Module Rack
1310 nm FOM, 4 channel, video signals, use with
LTC 4637 series rack
Order number LTC 4744/00
LTC 4745/60 Receiver
1310 nm FOM, 4 channel, video signals, 120-230 VAC,
50/60 Hz
Order number LTC 4745/60
LTC 4745/00 Receiver, Rack Module
1310 nm FOM, 4 channel, video signal, use with
LTC 4637 series rack
Order number LTC 4745/00
Represented by:
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180
security.sales@us.bosch.com
www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
emea.securitysystems@bosch.com
www.boschsecurity.com
© Bosch Security Systems 2013 | Data subject to change without notice
2348901259 | en, V3, 04. Oct 2013
Asia-Pacific:
Robert Bosch (SEA) Pte Ltd, Security
Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6571 2808
Fax: +65 6571 2699
apr.securitysystems@bosch.com
www.boschsecurity.asia
China:
America Latina:
Bosch (Shanghai) Security Systems Ltd. Robert Bosch Ltda Security Systems Division
201 Building, No. 333 Fuquan Road
Via Anhanguera, Km 98
North IBP
CEP 13065-900
Changning District, Shanghai
Campinas, Sao Paulo, Brazil
200335 China
Phone: +55 19 2103 2860
Phone +86 21 22181111
Fax: +55 19 2103 2862
Fax: +86 21 22182398
latam.boschsecurity@bosch.com
www.boschsecurity.com.cn
www.boschsecurity.com
Download PDF