Kingfisher NMHT450 Manual

Original Instructions_MNL_NMHT450_GB_V3_210918
Hedge Trimmer
450W 45cm
NMHT450
BX220IM
CAUTION: Read the instructions before using the product.
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 1
9/22/21 4:31 PM
EN
Let’s
get started...
These instructions are for your safety. Please read through them
thoroughly before use and retain them for future reference.
Getting started...
02
Safety information
Your product
Before you start
03
12
13
In more detail...
16
Product functions
Operation
Care and maintenance
Troubleshooting
Recycling and disposal
Guarantee
Technical specifications
EC declaration of conformity
16
18
20
23
24
26
27
29
02
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 2
9/22/21 4:31 PM
Safety information
NMHT450
EN
Safety warnings
WARNING! Read all safety warnings,
instructions, illustrations and specifications
provided with this power tool. Failure to follow
all instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work area safety
Getting started...
General power tool safety warnings
1. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
Electrical safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
03
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 3
9/22/21 4:31 PM
EN
Safety information
NMHT450
Getting started...
Safety warnings
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
6. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
Personal safety
04
1. Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
2. Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 4
9/22/21 4:31 PM
Safety information
3. Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source, picking up or carrying the tool. Carrying
power tools with your finger on the switch or energising
power tools that have the switch on invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result
in personal injury.
5. Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
6. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away from
moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
7. If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust
collection can reduce dust-related hazards.
8. Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles. A careless action can cause
severe injury within a fraction of a second.
EN
Getting started...
NMHT450
Power tool use and care
1. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
2. Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
05
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 5
9/22/21 4:31 PM
EN
Safety information
NMHT450
Getting started...
Safety warnings
3. Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
4. Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
5. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool’s operation. If damaged, have the power tool
repaired before use. Many accidents are caused by
poorly maintained power tools.
6. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
7. Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
8. Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
06
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 6
9/22/21 4:31 PM
NMHT450
Safety information
EN
1. Have your power tools serviced by a qualified
repair person using only identical replacement
parts. This will ensure that safety of the power tool is
maintained.
Hedge trimmer safety warnings:
1. Keep all parts of the body away from the blade. Do
not remove cut material or hold material to be cut
when blades are moving. Blades continue to move
after the switch is turned off. A moment of inattention
while operating the hedge trimmer may result in serious
personal injury.
2. Carry the hedge trimmer by the handle with the
blade stopped and taking care not to operate any
power switch. Proper carrying of the hedge trimmer
will decrease the risk of inadvertent starting and
resultant personal injury from the blades.
3. When transporting or storing the hedge trimmer,
always fit the blade cover. Proper handling of the
hedge trimmer will decrease the risk of personal injury
from the blades.
4. When clearing jammed material or servicing the
unit, make sure all power switches are off and the
power cord is disconnected. Unexpected actuation
of the hedge trimmer while clearing jammed material
or servicing may result in serious personal injury.
5. Hold the hedge trimmer by insulated gripping
surfaces only, because the blade may contact
hidden wiring or its own cord. Blades contacting a
"live" wire may make exposed metal parts of the hedge
trimmer "live" and could give the operator an electric
shock.
Getting started...
Service
07
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 7
9/22/21 4:31 PM
EN
Safety information
NMHT450
Getting started...
Safety warnings
08
6. Keep all power cords and cables away from cutting
area. Power cords or cables may be hidden in hedges
or bushes and can be accidentally cut by the blade.
7. Do not use the hedge trimmer in bad weather
conditions, especially when there is a risk of
lightning. This decreases the risk of being struck by
lightning.
Vibration and noise reduction
To reduce the impact of noise and vibration emission,
limit the time of operation, use low-vibration and
low-noise operating modes as well as wear personal
protective equipment.
Take the following points into account to minimise the
vibration and noise exposure risks:
1. Only use the product as intended by its design and
these instructions.
2. Ensure that the product is in good condition and well
maintained.
3. Use correct attachments for the product and ensure
they are in good condition.
4. Keep tight grip on the handles/grip surface.
5. Maintain this product in accordance with these
instructions and keep it well lubricated (where
appropriate).
6. Plan your work schedule to spread any high vibration
tool use across a longer period of time.
7. Prolonged use of the product exposes the user
to vibrations that can cause a range of conditions
collectively known as hand-arm vibration syndrome
(HAVS) e.g. fingers going white; as well as specific
diseases such as carpal tunnel syndrome. To reduce
this risk when using the product, always wear protective
gloves and keep your hands warm.
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 8
9/22/21 4:31 PM
NMHT450
Safety information
EN
Residual risks
Even if you are operating this product in accordance
with all the safety requirements, potential risks of
injury and damage remain. The following dangers
can arise in connection with the structure and design
of this product:
1. Health defects resulting from vibration emission if the
product is being used over long periods of time or not
adequately managed and properly maintained.
2. Injuries and damage to property due to broken
attachments or the sudden impact of hidden objects
during use.
3. Danger of injury and property damage caused by flying
objects.
Getting started...
Emergency
Familiarise yourself with the use of this product by
means of this instruction manual. Memorise the
safety directions and follow them to the letter. This
will help to prevent risks and hazards.
1. Always be alert when using this product, so that
you can recognise and handle risks early. Fast
intervention can prevent serious injury and damage to
property.
2. Switch the product off and disconnect from the
power supply if there are malfunctions. Have
the product checked by a qualified professional and
repaired, if necessary, before you operate it again.
09
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 9
9/22/21 4:31 PM
EN
Safety information
NMHT450
Getting started...
Safety warnings
WARNING! This product produces an
electromagnetic field during operation! This field
may under some circumstances interfere with
active or passive medical implants! To reduce
the risk of serious or fatal injury, we recommend
persons with medical implants to consult their
doctor and the medical implant manufacturer
before operating this product!
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
V~
Volt, (alternating voltage)
Hz
Hertz
/min or Per minute
W
Watt
min-1
g
Gram
kg
Kilogram
mm
Millimetre
cm
Centimeter
m
Metre
dB(A) Decibel (A-rated)
Lock / to tighten or secure.
m/s²
Metres per second squared
Read the instruction manual.
Unlock / to loosen
Note / Remark.
Caution / Warning.
xxWyy
Manufacturing date code; year of manufacturing (20xx) and week of
manufacturing (Wyy)
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
10
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 10
9/22/21 4:31 PM
Safety information
NMHT450
EN
Wear protective, slip-resistant footwear.
Switch the product off and disconnect it from the power supply
before assembly, cleaning, adjustments, maintenance, storage and
transportation.
Do not expose the product to rain or wet conditions (moisture).
Keep hands away from moving cutting device!
Risk of pinching your finger.
Objects thrown by the product could hit the user or other bystanders.
Always ensure that other people and pets remain at a safe distance
from the product when it is in operation. In general, children must not
come near the area where the product is.
Disconnect the product from the mains plug if the cord is damaged or
entangled. DON’T TOUCH THE CORD BEFORE DISCONNECTING
THE SUPPLY.
Guaranteed sound power level value in 100 dB.
Getting started...
Wear tight-fitted protective clothes.
The product is of Protection class II. That means it is equipped with
enhanced or double insulation.
WEEE symbol. Waste electrical products should not be disposed of
with household waste. Please recycle where facilities exist. Check with
your Local Authority or local store for recycling advice.
The product complies with the applicable European directives and an
evaluation method of conformity for these directives was done.
UK Conformity Assessed.
11
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 11
9/22/21 4:31 PM
EN
Your product
NMHT450
Your product
6
Getting started...
5
4
7
3
8
9
2
1
10
11
1. Cutting device
(blade)
2. Front safeguard
3. Safety switch
4. Front handle
5. Air vents
6. Rear handle
7. On/off switch
8. Rear safeguard
9. Cord retainer
10. Power cord with plug
11. Blade cover
12
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 12
9/22/21 4:31 PM
Before you start
NMHT450
EN
1. Unpack all parts and lay them on a flat, stable surface.
2. Remove all packing materials and shipping devices if applicable.
3. Make sure the delivery contents are complete and free of any damage. If
you find that parts are missing or show damage do not use the product but
contact your dealer. Using an incomplete or damaged product represents a
hazard to people and property.
4. Ensure that you have all the accessories and tools needed for assembly and
operation. This also includes suitable personal protective equipment.
WARNING! The product and the packaging are not children’s toys!
Children must not play with plastic bags, sheets and small parts! There
is a danger of choking and suffocation.
You will need
(items not supplied)
(items supplied)
Suitable personal protective equipment Blade cover (11)
Suitable extension cord for outdoor use
Lubricant for blade
Getting started...
Unpacking
NOTE: The accessories required depend on the intended application.
Ask your dealer for advice.
Setup
WARNING! Before using the product, familiarise yourself with the
operating features read the entire instruction manual paying particular
attention to the safety rules and operating procedures.
Do not connect the product to power supply before removing the blade
cover (11).
Blade cover
1. Remove the blade cover (11) from the cutting device (blade) (1) before
operation (Fig. 1).
2. Keep the blade cover (11) safely.
13
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 13
9/22/21 4:31 PM
EN
Before you start
NMHT450
Getting started...
Setup
1
11
Fig. 1
NOTE: Always attach the blade cover (11) when the product is not in
use, for storage and transportation.
To attach the blade cover (11), align and push the blade cover onto the
cutting device (blade) (1).
Connection to power supply
NOTE: The product is equipped with a power cord with the length of
7 m. If a proper extension cord is required for operation. The
extension cord must be suitable for outdoor use with sockets
protected against water splashing! Ensure the extension cord is of the
proper size and type for your product (≥ 1.0 mm²)!
Always use a residual current supply (RCD) protected supply.
1. Double the power cord (10) back, about 60 cm from the power guard and lead
the loop through the hole of the rear safeguard (8) (Fig. 2).
2. Pull it over the cord retainer (9) and gently tug on the power cord (10) to
ensure that it is firmly secured (Fig. 3).
14
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 14
9/22/21 4:31 PM
9
8
8
9
10
Fig. 2
10
Fig. 3
3. Connect the plug of power cord (10) with a suitable socket.
WARNING! Check the voltage! The voltage must comply with the
information on the rating label!
If using an extension cord it must be suitable for outdoor use with
sockets protected against water splashing.
Ensure the extension cord is of the proper size and type for your
product:
· 1.5 mm2 for up to 60 m
· 2.5 mm2 for up to 100 m
EN
Getting started...
Before you start
NMHT450
4. Your product is now ready to be used.
15
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 15
9/22/21 4:31 PM
EN
Product functions
NMHT450
Intended use
In more detail...
This electric hedge trimmer NMHT450 is designated with a rated power input of
450 Watts.
The product is intended for cutting and trimming of hedges, bushes and shrubs in
domestic gardens. The maximum cutting capacity must be observed. Do not cut
branches exceeding the stated maximum capacity.
The use of this product in case of rain or humid environment is prohibited.
For safety reasons it is essential to read the entire instruction manual before first
operation and to observe all the instructions therein.
This product is intended for private domestic use only, not for any commercial
trade use. It must not be used for any purposes other than those described.
Switching on/off
1. Ensure the cutting device (blade) (1) does not touch any objects. Remove
the blade cover (11) from the cutting device (blade) (1) before switching the
product on.
2. Hold the product with one hand on the front handle (4) and the other hand on
the rear handle (6).
3. Squeeze the safety switch (3) and hold it in position (Fig. 4, step 1).
4. Squeeze the on/off switch (7) to switch the product on (Fig. 4, step 2).
5. Release either the on/off switch (7) or the safety switch (3) to switch the
product off.
6
4
7
3
2.
1
1.
Fig. 4
16
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 16
9/22/21 4:31 PM
Product functions
NMHT450
EN
1. Check the product, its power cord and plug as well as accessories for damage
before each use. Do not use the product if it is damaged or shows wear.
2. Double check that the accessories and attachments are properly fixed.
3. Always hold the product on its handles. Keep the handles dry to ensure safe
support.
4. Ensure that the air vents are always unobstructed and clear. Clean them if
necessary with a soft brush. Blocked air vents may lead to overheating and
damage the product.
5. Switch the product off immediately if you are disturbed while working by other
people entering the working area. Always let the product come to complete
stop before putting it down.
6. Do not overwork yourself. Take regular breaks to ensure you can concentrate
on the work and have full control over the product.
WARNING! Ensure the power cord or the extension cord will not touch
the cutting device (blade) (1) during operating!
Danger of electric shock!
Trimming times
green leaf hedges
June to October
evergreens
April and August
conifers and other fast growing shrubs
every 6 - 8 weeks
In more detail...
General operation
Trimming
NOTE: Try to keep the cutting device angled at approximately 15° to
the cutting surface.
1. Ensure that no people or animals are in the work area.
2. Cut and remove branches exceeding the cutting capacity of this product
using a proper pruner before operation.
3. Always hold the product firmly with both hands on front handle (4) and rear
handle (6). Never operate this product using only one hand.
4. Do not rush and do not attempt to cut too much with one stroke of the cutting
device.
17
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 17
9/22/21 4:31 PM
EN
Operation
NMHT450
Trimming
5. First cutting both sides from the bottom upwards to the top. This will prevent
any of the cuttings falling into the path of the area still to be cut (Fig. 5).
6. After cutting the sides proceed to the top. Try to keep the cutting device
angled at approximately 15° to the cutting surface (Fig. 6).
In more detail...
0-15˚
Fig. 5
7. When cutting wide hedges with the cutting area in sight move the cutting
blade lightly through the cutting surface in a sweeping motion following the
shape of the hedge or shrub. A slight tilt downwards of the cutting blade in the
direction of motion is recommended for optimum cutting performance.
8. Cut in a number of stages to achieve a better result rather than trying to cut
in one go if the area being cut is particularly long (Fig. 7); smaller cuttings will
allow for easy composting.
NOTE: When shaping it is advisable to achieve a trapezoidal shape
(Fig. 8). A trapezoidal cut corresponds to the natural growth of plants
and results in optimal hedge growth, as it will expose more light to the
lower end of the hedge.
Fig. 7
18
Fig. 6
Fig. 8
9. Lubricate the internal surfaces of the blade if the cutting device (blade) (1)
overheats during operation (Fig. 9).
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 18
9/22/21 4:31 PM
Operation
NMHT450
EN
Trimming
1
After use
Fig. 9
1. Switch the product off, disconnect the product from the power supply and let
it cool down.
2. Attach the blade cover (11) if necessary.
3. Check, clean and store the product as described below.
The golden rules for care
WARNING! Always switch the product off, disconnect the product from
the power supply and let the product cool down before performing
inspection, maintenance and cleaning work!
In more detail...
WARNING! This operation must only be performed when the blades
have stopped running and the product is switched off!
1. Keep the product clean. Remove debris from it after each use and before
storage.
2. Regular and proper cleaning will help ensure safe use and prolong the life of
the product.
3. Inspect the product before each use for worn and damaged parts. Do not
operate it if you find broken and worn parts.
WARNING! Only perform repairs and maintenance work according to
these instructions! All further works must be performed by a qualified
specialist!
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 19
19
9/22/21 4:31 PM
EN
Operation / Care and maintenance
NMHT450
General Cleaning
1. Clean the product with a damp cloth and pH-neutral soap. Use a brush for
areas that are hard to reach.
2. In particular clean the air vents (5) after every use with a cloth and brush.
3. Remove stubborn dust with high pressure air (max. 3 bar).
In more detail...
NOTE: Do not use chemical, alkaline, abrasive or other aggressive
detergents or disinfectants to clean this product as they might be
harmful to its surfaces.
4. Check for worn or damaged parts. Replace worn parts as necessary or contact
an authorised service centre for repair before using the product again. Check
for worn or damaged parts. Replace worn parts as necessary or contact an
authorised service centre for repair before using the product again.
Cutting device (blade)
WARNING! Wear safety gloves when working on the cutting device
and close to it! Use appropriate tools to remove debris, e. g. a brush or
wooden stick! Never use your bare hands!
1. Keep the cutting device (blade) (1) clean and free of debris. Remove trimmings
with a brush.
2. Apply a small amount of suitable lubricant on the cutting device (blade) to
retain a good cutting performance (Fig. 9).
Power cord
If the power cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a safety hazard.
20
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 20
9/22/21 4:31 PM
Care and maintenance
NMHT450
EN
UK plug (only for UK market)
Connect
Blue to
N(Neutral)
13 AMP fuse
approved to
BS 1362
Brown L(Live)
Outer sleeve
firmly clamped
Cable grip
WARNING! Never connect live or neutral wires to the earth terminal of
the plug, which is marked with E.
Only fit an approved 13 Amp BS 1363 or BS 1363/A plug and the correctly
rated fuse. If in doubt, consult a qualified electrician.
In more detail...
If you need to replace the fitted plug, then follow the instructions below.
IMPORTANT: The wires in the mains lead are coloured in accordance with the
following code:
Blue – Neutral
Brown – Live
As the colours of the wire in the mains lead of this product may not correspond
with the coloured marking identifying the terminals in your plug, proceed as
follows. The wire, which is coloured blue, must be connected to the terminal,
which is marked with N or coloured black. The wire, which is coloured brown,
must be connected to the terminal, which is marked L or coloured red.
NOTE: If a moulded plug is fitted and has to be removed take great
care in disposing of the plug and severed cable, it must be destroyed
to prevent engaging into a socket.
Repair
This product does not contain any parts that can be repaired by the consumer.
Contact an authorised service centre or a similarly qualified person to have it
checked and repaired.
21
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 21
9/22/21 4:31 PM
EN
Care and maintenance
NMHT450
Storage
Switch the product off and disconnect it from the power supply.
Clean the product as described above.
Attach the blade cover (11) onto the cutting device (blade) (1).
Store the product and its accessories in a dark, dry, frost-free, well-ventilated
place.
5. Always store the product in a place that is inaccessible to children. The ideal
storage temperature is between 10 °C and 30 °C.
6. We recommend using the original package for storage or covering the product
with a suitable cloth or enclosure to protect it against dust.
In more detail...
1.
2.
3.
4.
Transportation
1.
2.
3.
4.
Switch the product off and disconnect it from the power supply
Attach the blade cover (11) onto the cutting device (blade) (1).
Always carry the product by its handles (4, 6).
Protect the product from any heavy impact or strong vibrations which may
occur during transportation in vehicles.
5. Secure the product to prevent it from slipping or falling over.
Troubleshooting
Suspected malfunctions are often due to causes that the users can fix themselves.
Therefore check the product using this section. In most cases the problem can
be solved quickly.
WARNING! Only perform the steps described within these instructions!
All further inspection, maintenance and repair work must be performed
by an authorised service centre or a similarly qualified specialist if you
cannot solve the problem yourself!
Problem
1. Product does
not start
Possible cause
Solution
1.1. Not connected to power 1.1. Connect to power
supply
supply
1.2. Power cord or plug is
defective
1.2. Check by a specialist
electrician
1.3. Other electrical defect
to the product
1.3. Check by a specialist
electrician
22
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 22
9/22/21 4:31 PM
Care and maintenance / Troubleshooting
NMHT450
EN
Troubleshooting
Problem
2. Product does
not reach full
power
Possible cause
2.1. Extension cord not
suitable for operation
with this product
Solution
2.1. Use a proper extension
cord
2.2. Power source
2.2. Connect to another
(e.g. generator) has too
power source
low voltage
3. Unsatisfactory 3.1. Blade is worn /
result
damaged
3.2. Thickness of branches
exceeds capacity
4. Excessive
vibration or
noise
2.3. Clean the air vents
3.1. Replace with a new one
3.2. Only cut branches
complying with the
capacity
4.1. Blade is dull / damaged 4.1. Replace with a new one
4.2. Bolts/nuts are loose
4.2. Tighten bolts/nuts
Recycling and disposal
Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist.
Check with your Local Authority or local store for recycling advice.
For further information visit www.recycle-more.co.uk.
The product comes in a package that protects it against damage during shipping.
Keep the package until you are sure that all parts have been delivered and the
product is working properly. Recycle the package afterwards.
In more detail...
2.3. Air vents are blocked
23
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 23
9/22/21 4:31 PM
EN
Troubleshooting / Recycling and disposal
NMHT450
Guarantee
In more detail...
We take special care to select high quality materials and use manufacturing
techniques that allow us to create products incorporating design and durability.
This product has a manufacturer’s guarantee of 2 years against manufacturing
defects, from the date of purchase (if bought in store) or date of delivery
(if bought online), at no additional cost for normal (non-professional or commercial)
household use.
To make a claim under this guarantee, you must present your proof of purchase
(such as a sales receipt, purchase invoice or other evidence admissible under
applicable law), please keep your proof of purchase in a safe place. For this
guarantee to apply, the product you purchased must be new, it will not apply to
second hand or display products. Unless stated otherwise by applicable law, any
replacement product issued under this guarantee will only be guaranteed until
expiry of the original period guarantee period.
This guarantee covers product failures and malfunctions provided the product
was used for the purpose for which it is intended and subject to installation,
cleaning, care and maintenance in accordance with the information contained in
these terms and conditions, in the user manual and standard practice, provided
that standard practice does not conflict with the user manual.
This guarantee does not cover defects and damage caused by normal wear
and tear or damage that could be the result of improper use, faulty installation
or assembly, neglect, accident, misuse, or modification of the product. Unless
stated otherwise by applicable law, this guarantee will not cover, in any case,
ancillary costs (shipping, movement, costs of uninstalling and reinstalling, labour
etc), or direct and indirect damage.
Rights under this guarantee are enforceable in the country in which you purchased
this product. Guarantee related queries should be addressed to the store you
purchased this product from.
The guarantee is in addition to and does not affect your statutory rights.
Manufacturer:
Kingfisher International Products Limited
3 Sheldon Square, W26PX London United Kingdom
www.kingfisher.com/products
24
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 24
9/22/21 4:31 PM
NMHT450
Guarantee
EN
Guarantee
Distributor:
B&Q plc
Chandlers Ford, Hants, SO53 3LE, United Kingdom
www.diy.com
In more detail...
Screwfix Direct Limited
Trade House, Mead Avenue, Yeovil, BA22 8RT, United Kingdom
www.screwfix.com
25
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 25
9/22/21 4:31 PM
EN
Guarantee
NMHT450
In more detail...
Technical specifications
General
>>Rated voltage, frequency
>>Rated power input
>>Rated no load speed n0
>>Blade length
>>Max. cutting length
>>Tooth gap
>>Protection class
>>Degree of protection
>>Weight
>>Length of power cord
>>Dimensions
Sound values
>>Sound pressure level at
operator’s position LpA
>>Uncertainty KpA
>>Measured sound power level LWA
>>Uncertainty KWA
Hand arm vibration values
>>Front handle ah,W
> Rear handle ah,W
> Uncertainty K
: 230-240 V~,50 Hz
: 450 W
: 1700 min-1
: 45 cm
: 41 cm
: max. 16 mm
: II /
: IPX0
: approx. 2.68 kg
: approx. 700 cm
: approx. 160*105*800 mm
: 83.5 dB(A)
: 3 dB(A)
: 97.6 dB(A)
: 2.09 dB(A)
: 2.45 m/s²
: 2.11 m/s²
: 1.5 m/s²
The sound values have been determined according to noise test code given in
EN 62841-4-2, using the basic standards EN ISO 11201 and EN ISO 3744.
The sound intensity level for the operator may exceed 80 dB(A) and ear protection
measures are necessary.
The declared vibration value has been measured in accordance with a standard
test method (according to EN 62841-4-2) and may be used for comparing
one product with another. The declared vibration value may also be used in a
preliminary assessment of exposure.
26
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 26
9/22/21 4:31 PM
Technical specifications
NMHT450
EN
Technical specifications
Rating label explanation
Hedge trimmer: NMHT450
NM = Brand name
HT = Hedge Trimmer
450 = Rated power (W)
In more detail...
WARNING! Depending on the actual use of the product the vibration
values can differ from the declared total. Adopt proper measures to
protect yourself against vibration exposures. Take the whole work
process including times the product is running under no load or
switched off into consideration.
Proper measures include among others regular maintenance and
care of the product and accessories, keeping hands warm, periodical
breaks and proper planning of work processes.
27
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 27
9/22/21 4:31 PM
EN
Technical specifications
NMHT450
EC declaration of conformity
(UK) DECLARATION OF CONFORMITY
Product



Hedge Trimmer 450W 45cm
NMHT450
Type / batch or serial number range 000001 to 999999
In more detail...
Name and address of the manufacturer or his authorised representative:
Kingfisher International Products Limited
3 Sheldon Square
London W2 6PX
United Kingdom
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Object of the declaration
Product
Model
EAN
Hedge Trimmer 450W 45cm
NMHT450
5059340239439
The object of the declaration described above is in conformity with the relevant legislation:
Supply of Machinery (Safety) Regulations 2008 as amended
Noise Emission in the Environment by Equipment for Use Outdoors Regulations 2001 as amended
Electromagnetic Compatibility Regulations 2016 as amended
The Restriction of the use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 as
amended
Measured Sound Power Level: 97.6 dB(A)
Guaranteed Sound Power Level: 100 dB(A)
References to the relevant designated standards used or references to the other technical specifications in relation to which
conformity is declared:
EN 55014-1:2017/A11:2010
EN 55014-2:2015
EN IEC 61000-3-2:2019
EN 61000-3-3:2013/A1:2019
EN 62841-1:2015
EN 62841-4-2:2019
EN ISO 3744:1995
Authorised signatory and technical file holder:
Kingfisher International Products Limited
3 Sheldon Square
London W2 6PX
United Kingdom
David Awe
Group Quality Director
On [22/10/2021]
UK DOC MD_20210720v4.docx
28
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 28
9/22/21 4:31 PM
EC declaration of conformity
NMHT450
EN
Product/ Produit/ Produkt/Produsul/Producto/Produto
Hedge Trimmer 450W 45cm/ Taille-haie 450W 45cm/ Nożyce do żywopłotu 450W 45cm/ Foarfecă pentru tuns gard viu de 450W

45cm/ Cortasetos 450W 45cm/ Aparador de sebes de 450W e 45cm

NMHT450
Type / batch or serial number range 000001 to 999999

Name and address of the manufacturer or his authorised representative:
Nom et adresse du fabricant ou de son mandataire:
Nazwa i adres producenta lub jego upoważnionego przedstawiciela:
Denumirea și adresa producătorului sau a reprezentantului său autorizat:
Nombre y dirección del fabricante o de su representante autorizado:
Nome e endereço do fabricante ou do respetivo mandatário:
Kingfisher International Products B.V.,
Rapenburgerstraat 175E,
1011 VM Amsterdam,
The Netherlands
This declaration of conformity is issued under the sole responsibility of the manufacturer.
La présente déclaration de conformité est établie sous la seule responsabilité du fabricant.
Niniejsza deklaracja zgodności wydana zostaje na wyłączną odpowiedzialność producenta.
Prezenta declarație de conformitate este emisă pe răspunderea exclusivă a producătorului.
La presente declaración de conformidad se expide bajo la exclusiva responsabilidad del fabricante.
A presente declaração de conformidade é emitida sob a exclusiva responsabilidade do fabricante.
Object of the declaration/Objet de la declaration/Przedmiot deklaracji/Obiectul declarației/Objeto de la declaración/Objeto da declaração
Product/Produit/Produkt/Produsul/Producto/
Model/Modèle/Model/Modelul/Modelo/
EAN
Produto
Modelo
NMHT450
5059340239439 (UK)
Hedge Trimmer 450W 45cm/ Taille-haie
5059340240107 (EU)
450W 45cm/ Nożyce do żywopłotu 450W
45cm/ Foarfecă pentru tuns gard viu de
450W 45cm/ Cortasetos 450W 45cm/
Aparador de sebes de 450W e 45cm
The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:
L’objet de la déclaration décrit ci-dessus est conforme à la législation d’harmonisation de l’Union applicable:
Wymieniony powyżej przedmiot niniejszej deklaracji jest zgodny z odnośnymi wymaganiami unijnego prawodawstwa harmonizacyjnego:
Obiectul declarației descris mai sus este în conformitate cu legislația relevantă de armonizare a Uniunii:
El objeto de la declaración descrita anteriormente es conforme con la legislación de armonización pertinente de la Unión:
O objeto da declaração acima descrito está em conformidade com a legislação de harmonização da União aplicável:
2006/42/EC as amended Machinery Directive
2014/30/EU as amended Directive Electromagnetic compatibility
2000/14/EC as amended Outdoor Noise Directive
2011/65/EU as amended
Directive Restriction of the use of certain hazardous substances in electrical and electronic equipment
Directive 2006/42/CE relative aux machines
2014/30 / UE telle que modifiée Directive Compatibilité électromagnétique
Directive 2000/14/CE relative aux émissions sonores extérieures
Directive 2011/65/UE relative à la limitation de l’utilisation de certaines substances dangereuses dans les équipements électriques et
électroniques
2006/42/WE w zmienionej dyrektywie maszynowej
2014/30 / UE ze zmianami Dyrektywa Kompatybilność elektromagnetyczna
2000/14/WE w zmienionej dyrektywie w sprawie hałasu na zewnątrz
2011/65 / UE ze zmianami Dyrektywa Ograniczenie stosowania niektórych niebezpiecznych substancji w sprzęcie elektrycznym i
elektronicznym
2006/42/CE, astfel a fost modificată Directiva privind echipamentele
2014/30/UE, astfel a fost modificată Directiva privind compatibilitatea electromagnetică
2000/14/CE, astfel a fost modificată Directiva privind zgomotul în aer liber
2011/65/UE, astfel a fost modificată Directiva privind limitarea utilizării anumitor substanțe periculoase în echipamentele electrice și
electronice
Directiva sobre maquinaria modificada 2006/42/CE
2014/30/UE modificada Directiva Compatibilidad electromagnética
2000/14/CE modificada Directiva sobre ruido al aire libre
2011/65/UE modificada Directiva Restricción del uso de determinadas sustancias peligrosas en equipos eléctricos y electrónicos
2006/42/CE como diretiva de máquinas alteradas
2014/30/UE como alteração da compatibilidade eletromagnétic
2000/14/CE como diretiva de ruído exterior alterada
2011/65/UE como restrição diretiva alterada da utilização de certas substâncias perigosas em equipamentos elétricos e eletrónicos
In more detail...
(EN) EU DECLARATION OF CONFORMITY
(FR) DÉCLARATION UE DE CONFORMITÉ
(PL) DEKLARACJA ZGODNOŚCI UE
(RO) DECLARAȚIA DE CONFORMITATE UE
(ES) DECLARACIÓN UE DE CONFORMIDAD
(PT) DECLARAÇÃO DE CONFORMIDADE UE
EU DOC MD MULTI LINGUAL_20210720v6.docx
29
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 29
9/22/21 4:31 PM
EN
EC declaration of conformity
In more detail...
Measured Sound Power Level
Le niveau de puissance acoustique mesuré
Zmierzony poziom mocy akustycznej
Nivel de putere acustică măsurat
Nivel de potencia sonora medido
Nível de potência sonora medido
: 97.6 dB(A)
NMHT450
Guaranteed Sound Power Level
Le niveau de puissance acoustique garant
Gwarantowany poziom mocy akustycznej
Nivel de putere acustică garantat
Nivel de potencia sonora garantizado
Nível de potência sonora garantido
: 100 dB(A)
References to the relevant harmonised standards used or references to the other technical specifications in relation to which conformity is
declared:
Références des normes harmonisées pertinentes appliquées, y compris la date de celles-ci, ou des autres specifications techniques, y
compris la date de celles-ci, par rapport auxquelles la conformité est déclarée:
Odwołania do odnośnych norm zharmonizowanych, które zastosowano, wraz z datą normy, lub do innych specyfikacji technicznych, wraz z
datą specyfikacji, w odniesieniu do których deklarowana jest zgodność:
Trimiteri la standardele armonizate relevante folosite, inclusiv data standardului, sau trimiteri la celelalte specificații tehnice, inclusiv data
specificațiilor, în legătură cu care se declară conformitatea:
Referencias a las normas armonizadas pertinentes utilizadas, incluidas las fechas de las normas, o referencias a las otras especificaciones
técnicas, incluidas las fechas de las especificaciones, respecto a las cuales se declara la conformidad:
Referências às normas harmonizadas aplicáveis utilizadas, incluindo a data da norma, ou às outras especificações técnicas, incluindo a data
da especificação, em relação às quais é declarada a conformidade:
EN 55014-1:2017/A11:2010
EN 55014-2:2015
EN IEC 61000-3-2:2019
EN 61000-3-3:2013/A1:2019
EN 62841-1:2015
EN 62841-4-2:2019
EN ISO 3744:1995
Authorised signatory and technical file holder/signataire et responsable de la documentation technique authorisé/ podmiot uprawniony do
wystawienia i adres prezechowywania dokumentacji technicznej/semnatar autorizat și deținător al dosarului tehnic/firmante autorizado y
titular del expediente tecnico/ signatário autorizado e detentor da ficha técnica
Kingfisher International Products B.V.,
Rapenburgerstraat 175E,
1011 VM Amsterdam,
The Netherlands
David Awe
Group Quality Director
: [22/10/2021]
EU DOC MD MULTI LINGUAL_20210720v6.docx
30
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 30
9/22/21 4:31 PM
Manufacturer,Fabricant,Producent,Producător,Fabricante:
UK Manufacturer:
Kingfisher International Products Limited
3 Sheldon Square, London, W2 6PX
United Kingdom
www.kingfisher.com/products
EU Manufacturer:
Kingfisher International Products B.V.
Rapenburgerstraat 175E
1011 VM Amsterdam
The Netherlands
www.kingfisher.com/products
www.diy.com
www.screwfix.com
www.screwfix.ie
To view instruction manuals online, visit
www.kingfisher.com/products
www.castorama.fr
www.bricodepot.fr
Pour consulter les manuels d’instructions en ligne,
rendez-vous sur le site www.kingfisher.com/products
www.castorama.pl
Aby zapoznaü siĊ z instrukcją obsáugi online, odwiedĨ
stronĊ www.kingfisher.com/products
www.bricodepot.es
Para consultar los manuales de instrucciones en línea,
visite www.kingfisher.com/products
www.bricodepot.pt
Para consultar manuais de instruções online, visite
www.kingfisher.com/products
www.bricodepot.ro
Pentru a consulta manualele de instrucĠiuni online, vizitaĠi
www.kingfisher.com/products
www.koctas.com.tr
KullanÕm kÕlavuzuna internet üzerinden ulaúmak için
www.kingfisher.com/products adresini ziyaret edin
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 31
9/22/21 4:31 PM
">