SGH-X630
User’s Guide
Drive safely at all times
Do not use a hand-held phone while driving.
Park the vehicle first.
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or
illegal.
Switch off the phone when refuelling
Do not use the phone at a refuelling point
(service station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using
them in an aircraft is both illegal and
dangerous.
Switch off the phone near all medical
equipment
Hospitals or health care facilities may be using
equipment that could be sensitive to external
radio frequency energy. Follow any regulations
or rules in force.
Interference
All wireless phones may be subject to
interference, which could affect their
performance.
Accessories and batteries
Meet any special regulations in force in any
area and always switch off your phone
whenever it is forbidden to use it, or when it
may cause interference or danger.
Use only Samsung-approved batteries and
accessories, such as headsets and PC data
cables. Use of any unauthorised accessories
could damage you or your phone and may
be dangerous.
Water resistance
Your phone is not water-resistant. Keep it
dry.
Sensible use
Use only in the normal position (held to the
ear). Avoid unnecessary contact with the
antenna when the phone is switched on.
Important safety precautions
Be aware of special regulations
• The phone could explode if the battery is
replaced with an incorrect type.
• Dispose used batteries according to the
manufacturer’s instructions.
At very high volumes, prolonged
listening to a headset can damage
your hearing.
Emergency call
Qualified service
Key in the emergency number for your
present location, then press
.
Only qualified service personnel may repair
your phone.
Keep your phone away from small
children
For more detailed safety information, see
"Health and safety information" on page 79.
Keep the phone and all its parts, including
accessories, out of the reach of small
children.
1
About this Guide
This User’s Guide provides you with
condensed information about how to use
your phone. To quickly learn the basics for
your phone, please refer to “Get started”
and “Step outside the phone.”
In this guide, the following instruction icons
appear:
Indicates that you need to pay careful
attention to the subsequent
information regarding safety or phone
features.
Indicates that you can get more
information on the referenced page.
→
Indicates that you need to press the
Navigation keys to scroll to the
specified option and then select it.
[
]
< >
2
•
Special features of your phone
•
Music player
Play music files using
your phone as a music
player.
•
Bluetooth
Transfer media files and
personal data and
connect to other devices
using free, wireless
Bluetooth technology.
•
FM radio
Listen to your favourite
radio stations anytime,
anywhere.
Indicates a key on the phone. For
example, [ ]
Indicates a soft key, whose function is
displayed on the phone screen. For
example, <Menu>
Camera and camcorder
Use the camera module
on your phone to take a
photo or record a video.
Web browser
Access the wireless web
to get up-to-the-minute
information and a wide
variety of media content.
•
Java
Enjoy Java™-based
embedded games and
download new games.
•
Get personal with
photo caller ID
See who’s calling you
when their very own
photo displays.
•
Calendar
Keep track of your daily,
weekly, and monthly
schedule.
•
Name card
Create name cards with
your number and profile.
Whenever introducing
yourself to others, use
this convenient electronic
name card.
•
Voice recorder
Record memos or
sounds.
•
Alarm
Use your phone as an
alarm clock to wake you
up in the morning or
notify you of an
impending event.
Multimedia Message Service (MMS)
Send and receive MMS messages with a
combination of text, images, video, and
audio.
Special features of your phone
•
•
3
Contents
Unpack
6
Make sure you have each item
Your phone
6
7
Enter text
22
Call functions
24
First steps to operating your phone
Advanced calling features
Install and charge the phone ...................... 7
Power on or off......................................... 8
Keys and display ...................................... 9
Access menu functions ............................ 11
Customise your phone............................. 12
Make/Answer calls .................................. 14
Menu functions
Step outside the phone
Health and safety information
79
Index
87
14
Begin with your camera, the music player, the FM
radio, and other special features
Use the camera ...................................... 14
Play music ............................................. 15
Listen to the FM radio.............................. 16
4
17
18
19
20
20
AB, T9, Number, and Symbol modes
Keys, features, and locations
Get started
Browse the web ......................................
Use Phonebook .......................................
Send messages.......................................
View messages .......................................
Use Bluetooth .........................................
28
All menu options listed
Solve problems
77
Help and personal needs
Overview of menu functions
To access Menu mode, press <Menu> in Idle mode.
1 Call log
p. 28
3 Applications (continued)
1
2
3
4
5
6
7
p. 28
p. 29
p. 29
p. 29
p. 29
p. 29
p. 30
6
7
8
9
0
*
Recent contacts
Missed calls
Dialled calls
Received calls
Delete all
Call time
Call cost*
2 Phonebook
p. 30
1
2
3
4
5
6
7
8
p. 30
p. 31
p. 32
p. 32
p. 33
p. 33
p. 33
p. 34
Contact list
Add new contact
Group
Speed dial
My namecard
Own number
Management
Service number*
3 Applications
p. 34
1
2
3
4
5
p. 34
p. 36
p. 37
p. 38
p. 39
Music player
FM Radio
Voice recorder
Java world
World clock
6 File manager
p. 54
p. 40
p. 40
p. 41
p. 41
p. 42
p. 42
1
2
3
4
5
6
p. 54
p. 55
p. 56
p. 56
p. 57
p. 57
4 Browser
p. 42
7 Calendar
p. 57
1
2
3
4
5
Home
Bookmarks
http://
WAP profile
Clear cache
p. 42
p. 43
p. 44
p. 44
p. 44
8 Camera
p. 61
5 Messaging
p. 44
9 Settings
p. 65
1
2
3
4
5
6
p. 44
p. 47
p. 50
p. 51
p. 51
p. 54
1
2
3
4
5
6
7
8
9
p. 65
p. 66
p. 67
p. 68
p. 69
p. 72
p. 74
p. 75
p. 77
Alarm
Calculator
Convertor
Timer
Stopwatch
SIM AT*
Create message
My messages
Templates
Delete all
Settings
Memory status
Images
Videos
Music
Sounds
Other files
Memory status
Time and date
Phone settings
Display settings
Sound settings
Network services
Bluetooth
Security
Connection settings
Reset settings
* Shows only if supported by your SIM
card.
5
Unpack
Your phone
Make sure you have each item
Phone
Travel Adapter
Keys, features, and locations
Earpiece
Headset
jack
Display
Volume keys
Battery
User’s Guide
You can obtain various
accessories from your local
Samsung dealer.
The items supplied with
your phone and the
accessories available at
your Samsung dealer may
vary, depending on your
country or service
provider.
6
Navigation
keys (Up/
Down/Left/
Right)
Left soft
key
Dial key
Correct key
Special
function keys
Mirror
Web access/
Confirm key
Right soft
key
Power on/
off/ Menu
exit key
Alphanumeric
keys
Microphone
Camera
lens
Camera
key
Get started
First steps to operating your phone
Install the
battery.
Reattach the
cover.
SIM card information
When you subscribe to a cellular network,
you receive a plug-in SIM (Subscriber
Identity Module) card loaded with your
subscription details, such as your PIN, and
available optional services.
Install and charge the phone
Remove the
battery cover.
If the phone is
already on, first
turn it off by
pressing and
holding [ ].
Plug the travel adapter into the phone.
Insert the SIM
card.
Make sure that the
gold-coloured
contacts on the
card are face
down.
Plug the adapter into a standard AC wall
outlet.
7
Get started
When the phone is completely charged
(the battery icon becomes still), unplug
the adapter from the power outlet.
Remove the adapter from the phone.
Power on or off
Switch on
1. Press and hold [
Do not turn
on the phone
when mobile
phone use is
prohibited.
2. If necessary, enter the
PIN and press <OK>.
Switch off
].
Low battery indicator
Keypad lock
When the battery is low:
• a warning tone sounds,
• the low battery message displays, and
• the empty battery icon
blinks.
You can lock the keypad to prevent
accidental key presses from affecting phone
operations.
If the battery level becomes too low, the
phone automatically turns off. Recharge
your battery.
8
Press and hold [
].
In Idle mode, press and hold [ ] and then
press <Yes>. To unlock the keypad, press
the left soft key and then [ ].
You can also set the phone to lock the
keypad automatically.p. 66
Keys and display
Keys
Perform the function indicated on
the bottom line of the display.
In Idle mode, launch the web
browser.
In Menu mode, select the
highlighted menu option or confirm
input.
Make or answer a call.
In Idle mode, retrieve numbers
recently dialled, missed, or
received.
Delete characters from the display
or an item in an application.
Get started
In Idle mode, access your favourite
menus directly.p. 66
In Menu mode, scroll through menu
options.
End a call.
Press and hold to switch the phone
on or off.
In Menu mode, cancel input and
return the phone to Idle mode.
Enter numbers, letters, and some
special characters.
In Idle mode, press and hold [1] to
access your voicemail server. Press
and hold [0] to enter an
international call prefix.
Enter special characters.
In Idle mode, press and hold [ ] to
activate or deactivate Silent mode.
Press and hold [ ] to lock the
keypad or enter a pause between
numbers.
Adjust the phone volume.
In Idle mode, adjust the key tone
volume.
In Idle mode, press and hold to turn
on the camera.
In Camera mode, take a photo or
record a video.
9
Get started
Display
Layout
Icons
display various
icons.
Text and graphics
display messages,
instructions, and
information you
enter.
Menu
Icons*
Contacts
Soft key function
indicators
show the current
functions assigned
to the soft keys.
Office Zone, if registered for
the appropriate service
Bluetooth active
Connected to Bluetooth
hands-free car kit or
headset
Call ringer set to vibration
Silent mode (Vibration)
Silent mode (Mute)
Received signal strength
Mute mode, during a call
FM radio on
New message
Call in progress
New voicemail
Out of your service area;
you cannot make or receive
calls
Alarm set
Keypad Lock mode is active
GPRS network
Roaming network
Call diverting feature active
10
Home Zone, if registered for
the appropriate service
Battery power level
* Depending on your country or service provider,
the icons shown on the display may vary.
Access menu functions
Use the
soft keys
Select
Press the left
soft key to select
the highlighted
option.
2. Press the Navigation
keys to move to the next
or previous option.
3. Press <Select> or [ ]
to confirm the function
displayed or option
highlighted.
Back
Press the right
soft key to return
to the previous
menu level.
1. Press a desired soft key.
Get started
The roles of the soft keys
vary depending on the
function you are using. The
bottom line of the display
indicates their current role.
Select an
option
4. To exit, choose either of
the following methods.
• Press <Back> to
move up one level.
• Press [ ] to return
to Idle mode.
Use
shortcuts
Press the number key
corresponding to the option
you want.
11
Get started
Customise your phone
Display
language
1. In Idle mode, press
<Menu> and select
Settings → Phone
settings → Language.
Idle mode
wallpaper
1. In Idle mode, press
<Menu> and select
Settings → Display
settings → Wallpaper
→ Wallpaper image.
2. Select a language.
2. Select an image or a
video clip category.
Call ringtone 1. In Idle mode, press
<Menu> and select
Settings → Sound
settings → Incoming
call → Ringtone.
3. Select an image or a
video clip.
4. Press <Select>.
2. Select a ringtone
category.
3. Select a ringtone.
4. Press <Save>.
You can set wallpaper for the
idle screen.
5. Press <Save>.
Menu mode
skin colour
You can change the colour
for the display components,
such as title bars and
highlight bars.
1. In Idle mode, press
<Menu> and select
Settings → Display
settings → Skin.
2. Select a colour pattern.
12
Menu
shortcuts
You can set the Navigation
keys to function as shortcuts
to access your favourite
menus.
2. Select a key.
Silent mode
You can protect the phone
against unauthorised use
with a phone password. The
phone will require the
password on power-up.
Get started
1. In Idle mode, press
<Menu> and select
Settings → Phone
settings → Shortcuts.
Phone lock
1. In Idle mode, press
<Menu> and select
Settings → Security →
Change password.
3. Select a menu to be
assigned to the key.
2. Enter the default
password, 00000000,
and press <OK>.
You can switch the phone to
Silent mode to avoid
disturbing other people.
3. Enter a new 4- to 8-digit
password and press
<OK>.
Press and hold [ ] in Idle
mode.
4. Enter the new password
again and press <OK>.
5. Select Phone lock.
6. Select Enable.
7. Enter the password and
press <OK>.
13
Make/Answer calls
Make a call
Step outside the phone
1. In Idle mode, enter an
area code and phone
number.
2. Press [
].
3. To end the call, press
[ ].
Answer a call 1. When the phone rings,
press [
].
2. To end the call, press
[ ].
Adjust the
volume
during a call
Press [ / ].
Begin with your camera, the music player, the
FM radio, and other special features
Use the camera
Take a photo 1. In Idle mode, press and
hold [ ] to turn on the
camera.
2. Aim the lens at the
subject and make any
desired adjustments.
3. Press [ ] or [ ] to take
a photo. The photo is
saved automatically.
4. Press <Preview> to
take another photo.
View a photo 1. In Idle mode, press
<Menu> and select File
manager → Images →
Photos.
2. Select the photo you
want.
14
Record a
video
1. In Idle mode, press and
hold [ ] to turn on the
camera.
3. Press [ ] or [
recording.
Copy music
files to the
phone
] to start
4. Press [ ], <
>, or
[ ] to stop recording.
The video is saved
automatically.
5. Press <Preview> to
record another video.
Play a video
1. In Idle mode, press
<Menu> and select File
manager → Videos →
Video clips.
2. Select the video you
want.
Create a
play list
Use these methods:
•
Download from the
wireless webp. 42
•
Download from a
computer using the
optional Samsung PC
StudioSamsung PC
Studio User’s Guide
•
Receive via an active
Bluetooth connection
p. 72
Step outside the phone
2. Press [1] to switch to
Record mode.
Play music
1. In Idle mode, press
<Menu> and select
Applications → Music
player.
2. Press <Options> and
select Add to playlist →
Add all or Add files.
15
Create a
play list
(continued)
3. For Add files, press [ ]
to select the files you
want and press
<Select>.
4. Press <Back> to return
to the music player
screen.
Play music
files
1. From the music player
screen, press [ ].
2. During playback, use the
following keys:
•
: pauses or resumes
playback.
• Left: returns to the
previous file.
• Right: skips to the
next file.
• Up: opens the play
list.
•
/ : adjusts the
volume.
• Down: stops
playback.
16
Listen to the FM radio
Listen to the
radio
1. Plug the connector of the
supplied headset into the
jack on the right side of
the phone.
2. In Idle mode, press
<Menu> and select
Applications → FM
Radio.
3. Press [ ].
4. Press [Left] or [Right] to
find available radio
stations.
5. To turn off the radio,
press [ ] or disconnect
the headset from the
phone.
Store a radio 1. From the station list on
the FM Radio screen,
station
press <Options> and
select Add.
3. Select a location in which
you want to store the
station.
Using a built-in web browser, you can easily
access to the wireless web to get a variety of
up-to-date services and information and to
enjoy downloads of web content.
Step outside the phone
2. Enter the frequency of
the station and press
<Save>.
Browse the web
In Idle mode, press [ ].
Launch the
web browser
Navigate the
web
•
To scroll through browser
items, press [Up] or
[Down].
•
To select an item, press
[ ].
•
To return to the previous
page, press [C].
•
To access browser
options, press <Menu>.
17
Step outside the phone
Use Phonebook
Add a
contact
1. In Idle mode, enter a
phone number and press
<Options>.
2. Select Save contact →
Phone → a number type.
3. Specify contact
information: First name,
Last name, Mobile,
Home, Office, Fax, Other,
Email, Caller ID,
Ringtone, Group, and
Memo.
4. Press <Save> to save
the contact.
To the SIM card:
1. In Idle mode, enter a
phone number and press
<Options>.
2. Select Save contact →
SIM.
18
3. Enter a name.
4. Press <Save> to save
the contact.
To the phone’s memory:
Find a
contact
1. In Idle mode, press
<Contacts>.
2. Select a contact.
3. Scroll to a number and
press [ ] to dial, or
press [ ] to edit contact
information.
Create and
send a name
card
1. In Idle mode, press
<Menu> and select
Phonebook → My
namecard.
2. Specify your contact
information.
3. Press <Save> to save
the name card.
4. To send the name card,
press <Options> and
select Send via → a
sending method.
Send messages
1. In Idle mode, press
<Menu> and select
Messaging → Create
message → Text
message.
2. Enter the message text.
Send a
multimedia
message
(MMS)
5. For Image and video,
select Add image or
Add video and add an
image or a video clip.
6. For Sound, select Add
sound and add a sound
clip.
3. Press <Options> and
select Save and send or
Send only.
7. Select Message.
4. Enter destination
numbers.
8. Enter the message text
and press [ ].
5. Press [ ] to send the
message.
9. Press <Options> and
select Send.
1. In Idle mode, press
<Menu> and select
Messaging → Create
message → Multimedia
message.
Step outside the phone
Send a text
message
(SMS)
4. Select Image and video
or Sound.
10. Enter destination
numbers or addresses.
11. Press [ ] to send the
message.
2. Select Subject.
3. Enter the message
subject and press [ ].
19
Step outside the phone
View messages
View a text
message
From the Inbox:
1. In Idle mode, press
<Menu> and select
Messaging → My
messages → Inbox.
When a notification appears:
1. Press <View>.
2. Select the message from
the Inbox.
2. Select an MMS message
(
).
From the Inbox:
1. In Idle mode, press
<Menu> and select
Messaging → My
messages → Inbox.
2. Select an SMS message
( ).
View a
multimedia
message
Your phone is equipped with Bluetooth
technology enabling you to connect the
phone wirelessly to other Bluetooth devices
and exchange data with them, talk handsfree, or control the phone remotely.
When a notification appears:
1. Press <View>.
2. Press <Options> and
select Retrieve.
3. Select the message from
the Inbox.
20
Use Bluetooth
Turn on
Bluetooth
In Idle mode, press
<Menu> and select
Settings → Bluetooth →
Activation → On.
Search for
and pair with
a Bluetooth
device
2. Select a device.
3. Enter a Bluetooth PIN or
the other device’s
Bluetooth PIN, if it has
one, and press <OK>.
When the owner of the
other device enters the
same code, pairing is
complete.
Send data
1. Access an application,
Phonebook, File
manager, or Calendar.
2. Select an item.
Step outside the phone
1. In Idle mode, press
<Menu> and select
Settings → Bluetooth
→ My devices → Search
for new devices.
3. Press <Options> and
select Send via →
Bluetooth.
4. Select a device.
5. If necessary, enter the
Bluetooth PIN and press
<OK>.
Receive data To receive data via
Bluetooth, your phone’s
Bluetooth feature must be
active and its visibility must
be enabled.
If necessary, press <Yes>
to confirm the reception.
21
Enter text
AB, T9, Number, and Symbol modes
You can enter text for some features, such
as messaging, Phonebook, or Calendar,
using AB mode, T9 mode, Number mode,
and Symbol mode.
Using AB mode
Press the appropriate key until the character
you want appears on the display.
Key
Characters in order displayed
Upper case
Lower case
Changing the text input mode
•
•
•
Press and hold [ ] to switch between T9
mode (
) and AB mode (
).
Depending on your country, you may
also be able to access an input mode for
your specific language.
Press [ ] to change case or switch to
Number mode (
).
Press and hold [ ] to switch to Symbol
mode.
(Creating an SMS message with GSM-Alphabet
encoding)
Other AB mode operations
•
•
22
To enter the same letter twice or to enter
a different letter on the same key, wait
for the cursor to move to the right
automatically or press [Right]. Then,
enter the next letter.
Press [ ] to insert a space.
•
•
Press the Navigation keys to move the
cursor.
Press [C] to delete characters one by
one. Press and hold [C] to clear the
display.
T9 is a predictive text input mode that
allows you to enter any character using
single keystrokes.
Entering a word in T9 mode
1. Press [2] to [9] to start entering a word.
Press each key once for each letter.
For example, press [4], [3], [5], [5],
and [6] to enter Hello in T9 mode.
T9 predicts the word that you are typing,
and it may change with each key that
you press.
2. Enter the whole word before editing or
deleting characters.
3. When the word displays correctly, go to
step 4. Otherwise, press [0] to display
alternative word choices for the keys
that you have pressed.
For example, Of and Me use [6] and [3].
Other T9 mode operations
•
•
•
•
Press [1] to enter periods or apostrophes
automatically.
Press [ ] to insert a space.
Press the Navigation keys to move the
cursor.
Press [C] to delete characters one by
one. Press and hold [C] to clear the
display.
Enter text
Using T9 mode
4. Press [ ] to insert a space and enter the
next word.
Adding a new word to the T9
dictionary
This feature may not be available for some
languages.
1. Enter the word that you want to add.
2. Press [0] to display alternative words for
your key presses. When there are no
more alternative words, Add appears on
the bottom line.
3. Press <Add>.
4. Enter the word you want using AB mode
and press <OK>.
23
Using Number mode
Advanced calling features
Press the keys corresponding to the digits
you want.
Making a call
Using Symbol mode
Symbol mode enables you to insert symbols.
To
24
Call functions
Number mode enables you to enter
numbers.
Press
display more symbols
[Up] or [Down].
select a symbol
the corresponding
number key.
clear the entered
symbols
[C].
insert the symbols
<OK>.
1. In Idle mode, enter the area code and
phone number.
• Press [C] to delete the last digit or
press and hold [C] to clear the whole
display. You can move the cursor to
edit an incorrect digit.
• Press and hold [ ] to enter a pause
between numbers.
2. Press [ ].
3. When you want to end the call, press
[ ].
Making an international call
1. In Idle mode, press and hold [0]. The +
character appears.
2. Enter the country code, area code, and
phone number, then press [ ].
Redialling recent numbers
Answering a call
1. In Idle mode, press [ ] to display the
list of recent numbers.
2. Scroll to the number you want and press
[ ].
When you receive an incoming call, the
phone rings and displays the incoming call
image.
Once you have stored a number in
Phonebook, you can dial the number by
selecting it from Phonebook.
p. 30
You can also use the speed dial feature to
assign your most frequently dialled numbers
to specific number keys.p. 32
You can quickly dial a number from the SIM
card using its location number assigned
when stored.
1. In Idle mode, enter a location number
and press [ ].
2. Press [Left] or [Right] to scroll through
other numbers.
3. Press <Dial> or [ ] to dial the number
you want.
Press <Accept> or [
] to answer the call.
Call functions
Making a call from Phonebook
Tips for answering a call
•
•
•
When Anykey answer is active, you can
press any key, except for <Reject> and
[ ].p. 67
Press <Reject> or [ ] to reject a call.
Press and hold [ / ] to reject a call or
mute the ringer, depending on the
Volume key setting.p. 67
Viewing missed calls
If you have missed calls, the screen displays
how many calls you have missed.
1. Press <View>.
2. If necessary, scroll through the missed
calls.
3. Press [ ] to dial the number you want.
25
Call functions
Using the headset
Placing a call on hold/Retrieving
Use the headset to make or answer calls
without holding the phone.
Press <Hold> to place a call on hold, or
press <Retrieve> to retrieve the call.
Connect the headset to the jack on the right
side of the phone. The button on the
headset works as follows:
Making a second call
To
Press
redial the last call
and hold the button
twice.
answer a call
the button.
end a call
the button.
Options during a call
You can access a number of functions during
a call.
Adjusting the volume during a call
Use [ / ] to adjust the earpiece volume
during a call.
Press [ ] to increase the volume level and
[ ] to decrease the volume level.
26
You can make another call if your network
supports it.
1. Press <Hold> to put the call on hold.
2. Make the second call in the normal way.
3. Press <Swap> to switch between the
calls.
4. Press <Options> and select End held
call to end the call on hold.
5. To end the current call, press [ ].
Answering a second call
You can answer an incoming call while
already on the phone, if your network
supports it and you have activated the call
waiting feature.p. 70
1. Press [ ] to answer the call. The first
call is automatically put on hold.
2. Press <Swap> to switch between the
calls.
3. Press <Options> and select End held
call to end the call on hold.
4. To end the current call, press [ ].
•
To communicate with answering
machines or computerised telephone
systems, Send keys must be selected.
Using the speakerphone feature
•
Press [ ] and then <Yes> to activate the
speakerphone feature. Press [ ] again to
switch back to the earpiece.
Using In-call options
Press <Options> to access the following
options during a call:
• Speaker on/Normal: turn on the
speakerphone feature or switch back to
Normal mode.
• Menu: access the phone's menu
functions.
• Voice off/Voice on: switch off the
phone's microphone so that the other
person on the phone cannot hear you, or
switch it back on.
•
•
•
Call functions
Use your phone as a speaker phone to talk
and listen with the phone a short distance
away.
Mute keys/Send keys: switch the key
tones on or off.
Send DTMF: send the DTMF (Dual tone
multi-frequency) tones as a group. The
DTMF tones are the tones used in phones
for tone dialling, sounding when you
press the number keys. This option is
helpful for entering a password or an
account number when you call an
automated system, like a banking
service.
Contacts: access the contact list.
End held call: disconnect the call
currently on hold.
Transfer: transfer the currently active
call to a caller on hold. The two callers
can talk to each other, but you are
disconnected from the call.
27
•
•
Join: set up a multi-party call by adding
a caller on hold to a currently active call.
You can include up to 5 people on a
multi-party call.
Select one: select one of multi-party
call participants. You can then use the
following options:
Private: have a private conversation
with the selected participant. The other
participants can converse with each
other. After the private conversation,
select Join to return both private
participants to the multi-party call.
Removed: disconnect the selected
participant.
Menu functions
All menu options listed
Call log (Menu 1)
Use this menu to view the calls you have
dialled, received, or missed, and the length
of the calls. You can also check the cost of
your calls, if your SIM card supports this
function.
To access this menu, press <Menu> in Idle
mode and select Call log.
Recent contacts (Menu 1.1)
This menu displays the most recent calls
dialled, received, or missed.
Accessing a call log
1. Press [Left] or [Right] to move to
another call type.
2. Press [Up] or [Down] to scroll through
the call list.
3. Press [ ] to view the details of a call, or
press [ ] to dial a number.
28
Delete all (Menu 1.5)
While viewing call details, press <Options>
to access the following options:
• Call: edit the number and dial it.
• Save contact: save the number to
Phonebook.
• Send message: send an SMS or MMS
message to the selected number.
• Delete: delete the selected call log or all
call logs.
Use this menu to delete all of the logs in
each call type.
1. Press [ ] to select the call types to be
cleared.
2. Press <Delete>.
3. Press <Yes> to confirm the deletion.
This menu displays the most recent calls you
did not answer.
Dialled calls (Menu 1.3)
This menu displays the most recent calls you
have dialled.
Received calls (Menu 1.4)
This menu displays the most recent calls you
have received.
Call time (Menu 1.6)
This menu displays the time log for calls
made and received. The actual time invoiced
by your service provider will vary.
• Last call time: check the length of your
last call.
• Total dialled calls: check the total
length of all the calls you have dialled.
• Total received calls: check the total
length of all the calls you have received.
Call log (Menu 1)
Missed calls (Menu 1.2)
Menu functions
Using call log options
To reset the call timers, press <Reset>. You
need to enter the phone password.
The password is preset to 00000000. You
can change this password.p. 75
29
Menu functions
30
Call cost (Menu 1.7)
Phonebook
This network feature displays the cost of
calls. This menu is available only if
supported by your SIM card. Note that this is
not intended to be used for billing purposes.
• Last call cost: check the cost of your
last call.
• Total cost: check the total cost of all of
your calls. If the total cost exceeds the
maximum cost set in Set max. cost,
you must reset the counter before you
can make another call.
• Max. cost: check the maximum cost
limit set in Set max. cost.
• Reset counters: reset the cost
counters.
• Set max. cost: set the maximum cost
authorised for your calls.
• Price/Unit: set the price per unit that is
applied when the cost of your calls is
calculated.
You can store phone numbers on your SIM
card and in your phone’s memory. The SIM
card and phone’s memory are physically
separate, but they are used as a single
entity called Phonebook.
(Menu 2)
To access this menu, press <Menu> in Idle
mode and select Phonebook.
Contact list (Menu 2.1)
Use this menu to search for contacts in
Phonebook.
You can quickly access this menu by pressing
<Contacts> in Idle mode.
Finding a contact
1. Enter the first few letters of the name
that you want to find.
2. Select a contact from the list.
3. Scroll to a number and press [ ] to dial,
or press [ ] to edit contact information.
Using Phonebook options
While viewing contact details, press
<Options> to access the following options:
• Edit: edit contact information.
• Send message: send an SMS or MMS
message to the selected number.
• Copy to: copy the contact to the phone’s
memory or to the SIM card.
• Send via: send the contact via SMS,
MMS, or Bluetooth.
• Delete: delete the selected contact.
Mobile/Home/Office/Fax/Other:
add a number in any type.
• Email: assign an e-mail address.
• Caller ID: assign an image to alert
you to a call from the person.
• Ringtone: assign a ringtone to alert
you to a call from the person.
• Group: assign the number to a caller
group.
• Memo: add a memo about the
person.
3. Press <Save> to save the contact.
Add new contact (Menu 2.2)
Adding a contact on the SIM card
Use this menu to add a new contact to
Phonebook.
1. Select SIM.
2. Enter information about the contact.
• Name: assign a name.
• Phone number: add a number.
• Location: assign a location number.
Phonebook (Menu 2)
1. Select Phone.
2. Change the settings or enter information
about the contact.
• First name/Last name: assign a
name.
Menu functions
Adding a contact in the phone’s
memory
•
To assign a caller ID image, ringtone, or
group, the contact must be saved to the
phone’s memory.
3. Press <Save> to save the contact.
31
Menu functions
Group (Menu 2.3)
Use this menu to organise your contacts in
caller groups.
•
•
•
Creating a caller group
1. Press <Options> and select Add.
2. Enter a name for the group.
3. Select the caller ID line and set an
image.
4. Select the ringtone line and set a
melody.
5. Press <Save> to save the group.
Adding members to a caller group
1. Select a group.
2. Press <Add>.
3. Press [ ] to select the contacts to be
added.
4. Press <Select>.
Managing caller groups
While viewing the group list, press
<Options> to access the following options:
• View: display the members of the
selected group.
32
•
Add: add a new group.
Edit: change the group properties.
Send message: send an SMS or MMS
message to the group members you
want.
Delete: delete the selected group or all
groups. Group members, however, will
not be deleted from Phonebook.
Speed dial (Menu 2.4)
Use this menu to assign a speed dial number
(2 to 9) for 8 of your most frequently dialled
numbers.
Assigning speed dial numbers
1. Select a key location from 2 to 9. Key 1
is reserved for your voicemail server.
2. Select a contact from the contact list.
3. Select a number, if the contact has more
than one number.
Managing speed dial entries
From the Speed dial screen, press
<Options> to access the following options:
• Add: assign a number to an unassigned
key.
•
•
•
Dialling speed dial numbers
In Idle mode, press and hold the appropriate
key.
Use this menu to create a name card and
send it to other people.
Saving your name card
The procedure for creating your name card
is the same as the one for saving a phone
number in the phone’s memory.p. 31
Using name card options
After saving your name card, press
<Options> to access the following options:
• Edit: edit the name card.
•
•
Send via: send the name card via SMS,
MMS, or Bluetooth.
Exchange contact details: exchange
name cards with another person via
Bluetooth.
Delete: delete the name card.
Own number (Menu 2.6)
Use this feature to check your phone
numbers, or to assign a name to each of the
numbers. Changes made here do not affect
the actual subscriber numbers on your SIM
card.
Phonebook (Menu 2)
My namecard (Menu 2.5)
•
Menu functions
View: check the name and number
assigned to a key.
Change: assign a different number to a
key.
Remove: clear the speed dial setting for
a key.
Management (Menu 2.7)
Use this menu to manage contacts in
Phonebook.
• Saving location: select a default
memory location for saving contacts. If
you select Ask on saving, the phone
will ask you to select a memory location
each time you save a number.
33
Menu functions
•
•
•
Copy all to: copy all of the contacts
stored on the SIM card to the phone’s
memory, or vice versa.
Delete all: delete all of the contacts
from your phone’s memory, your SIM
card, or both.
Memory status: check the number of
contacts you have stored in the phone’s
memory and on the SIM card.
Service number (Menu 2.8)
Use this menu to view the list of Service
Dialling Numbers (SDN) assigned by your
service provider, including emergency
numbers and numbers for directory
enquiries. This menu is available if your SIM
card supports SDN.
1. Scroll to the number you want and press
<View>.
2. Press <Dial> or [ ].
34
Applications
(Menu 3)
Use this menu to play music files, listen to
the FM radio, or play Java games. You can
also use convenient features, such as a
voice recorder, alarm clock, calculator,
converter, and stopwatch.
To access this menu, press <Menu> in Idle
mode and select Applications.
Music player (Menu 3.1)
Use this menu to enjoy music. First, you
need to save music files into your phone’s
memory. You can play MP3 and AAC files
from the phone’s memory.
Downloading or receiving music files
Use the following methods to save music
files to your phone’s memory:
• Download from the wireless webp. 42
• Download from a computer using the
optional Samsung PC StudioSamsung
PC Studio User’s Guide
• Receive via an active Bluetooth
connectionp. 74
Downloaded or received files are stored in
the Music folder.p. 56
Creating the play list
Playing music files
From the music player screen, press [ ].
Key
Function
Pauses or resumes playback.
Left
Returns to the previous file.
Right
Skips to the next file.
Up
Opens the play list.
Down
Stops playback.
/
1
Adjusts the volume level.
Changes the repeat mode.
Function
2
Changes the playback animation.
3
Turns Shuffle mode on or off.
5
Changes the skin type.
Using music player options
From the music player screen, press
<Options> to access the following options:
• Play/Pause: begin or pause playback.
• Open playlist: access the play list.
• Go to music: access the Music folder.
• Send via: send the current file via
Bluetooth.
• Set as: set the file as your ringtone or
as a ringtone for a Phonebook entry.
• Remove from playlist: remove the
selected file from the play list.
• Settings: change the default settings for
playing music files.
Repeat mode: select a repeat mode.
Applications (Menu 3)
During playback, use the following keys:
Key
Menu functions
1. From the music player screen, press
<Options> and select Add to playlist
→ Add all or Add files.
2. For Add files, press [ ] to select the
files to be added and press <Select>.
3. Press <Back> to return to the music
player screen.
35
Menu functions
•
Shuffle: set the music player to play
tracks in random order.
Visualisation: change the playback
animation.
Skin: select a skin type.
Volume: select a volume level.
Details: access the file properties.
Accessing the play list
From the music player screen, press [Up].
Press <Options> to access the following
options:
• Play: play the currently selected file.
• Add to playlist: add files to the play
list.
• Move in playlist: move the selected file
to the position you want within the play
list.
• Remove: remove the selected file or all
files from the play list.
• Details: access the file properties.
FM Radio (Menu 3.2)
Use this menu to listen to music or news via
the FM radio on your phone.
Turning on and listening to the radio
First, you must connect your phone with the
headset, which serves as a radio antenna.
1. Plug the connector of the supplied
headset into the jack on the right side of
the phone.
2. From the FM Radio screen, press [ ].
3. Press [Left] or [Right] to find the radio
station you want.
You can also press and hold [Left] or
[Right] to scan through available radio
stations.
4. To exit the FM Radio menu without
turning off the radio, press [ ]. This
enables you to access other functions
while listening to the radio.
Setting up a radio station list
You can store your favourite radio stations to
quickly access them without searching
through noisy frequencies.
36
•
•
•
•
•
Turning off the radio
To turn off the radio, press [ ] from the FM
Radio screen or disconnect the headset.
Using radio options
On the FM Radio screen, press <Options>
to access the following options:.
• FM Radio On/FM Radio Off: turn the
radio on or off.
• Speaker On/Earphone On: change the
audio mode to the phone’s speaker or
headset.
•
Applications (Menu 3)
To listen to the stored stations, press [Up] or
[Down] from the FM Radio screen.
Self tuning: let the phone automatically
scan through and save available radio
stations.
Add: store a radio station.
Edit: edit the title or frequency for a
saved radio station.
Remove: remove the selected station or
all stations.
Programme reminder: set the phone
to alert you to listen to the radio at a
specified time. When the pop-up
notification appears on the screen, press
<Listen> to turn on the specified radio
station.
Volume: select the radio volume.
Menu functions
1. Connect the headset to the phone and
press [ ] to turn on the radio.
2. Press <Options> and select Add.
3. Enter the frequency of the station and
press <Save>.
4. Select a location in which you want to
store the station.
5. Repeat from step 2 to store other
stations.
Voice recorder (Menu 3.3)
Use this menu to record voice memos.
Recording a voice memo
1. Press [ ] to start recording.
2. Speak into the microphone.
Press [ ] to pause or resume recording.
37
Menu functions
3. Press <Stop> or [Down] to end
recording. The voice memo is saved
automatically.
•
Reviewing the voice memo
•
•
After recording a voice memo, press [ ] to
review the voice memo.
•
During playback, use the following keys:
Key
Function
Pauses or resumes playback.
Left
Moves backward in a memo.
Java world (Menu 3.4)
Right
Moves forward in a memo.
Adjusts the volume.
Use this menu to access the embedded Java
games and downloaded Java applications.
Stops playback.
Accessing an embedded game
/
Down
Using voice memo options
After playback, press <Options> to access
the following options:
• Play: play back the voice memo.
• Record: record a new voice memo.
• Go to voice recorder files: access the
Voice recording list folder.
38
•
Send via: send the voice memo via MMS
or Bluetooth.
Delete: delete the voice memo.
Rename: change the name of the voice
memo.
Protection: lock the voice memo to
protect it from being deleted, or unlock
the voice memo.
Details: access the properties of the
voice memo.
1. From the Java world screen, select
Downloads → a game.
2. If necessary, press [ ].
Using Java application options
From the application list, press <Options>
to access the following options:
• Launch: launch the selected application.
•
•
•
Changing Java settings
You can select a connection profile to be
used for applications requiring network
access.
From the Java world screen, select Settings
→ a profile.
You can add or edit a profile using the
Connection settings menu.p. 75
You can view the amount of used and
available memory for Java games. You can
also view the number of downloaded games.
From the Java world screen, select Memory
status.
World clock (Menu 3.5)
Use this menu to set your local time zone
and find out the current time in another part
of the world.
Applications (Menu 3)
•
Checking memory status
Menu functions
•
Delete: delete the selected application
or all applications, except for the
standard games.
Details: access the application
properties.
Upgrade: upgrade the application to the
latest version.
Protection: lock the application to
protect it from being deleted, or unlock
the application.
Send information: send the URL
containing the application via SMS.
Viewing world time
1. From the world map, press [Left] or
[Right] to scroll to the city you want. As
the time line moves, the time and date of
the given zone display.
2. Press [ ] to save the city as your local
time zone.
Applying daylight saving time
1. From the world map, press <Options>
and select Set daylight saving time.
39
Menu functions
2. Press [ ] to select the time zones you
want.
3. Press <Save>.
Alarm (Menu 3.6)
Use this menu to set alarms. The alert type
for a normal alarm corresponds to the call
alert type settings. A wake-up alarm is not
affected by your sound settings.
Setting an alarm
1. Select the type of alarm.
2. Set each alarm option:
• Alarm: activate the alarm.
• Alarm time: enter the time for the
alarm to sound.
• AM/PM: set AM or PM in 12-hour
format.
• Repeat: select a repeat option.
• Alarm tone: select an alarm tone.
3. Press <Save>.
Stopping an alarm
•
40
For a non-wake-up alarm, press any key.
•
For a wake-up alarm, press <Confirm>
or [ ].
Press any key, except for <Confirm>
and [ ], to cause it to sound again after
5 minutes. You can do this a maximum
of 5 times.
Setting the alarm to sound when the
phone is off
From the Alarm screen, select Auto power
→ On.
If the phone is off when it is time for the
alarm to sound, the phone switches on and
sounds the alarm.
Deactivating an alarm
1. Select the alarm you want to deactivate.
2. Select Off on the Alarm line.
3. Press <Save>.
Calculator (Menu 3.7)
Use this menu to perform basic arithmetic
functions, such as addition, subtraction,
multiplication, and division.
1. Enter the first number.
•
2.
Convertor (Menu 3.8)
For the currency converter, you can view and
set currency rates by pressing
<View rate>.
Timer (Menu 3.9)
Use this menu to set a period of time for the
phone to count down. The phone sounds an
alarm when the specified period of time has
expired.
Applications (Menu 3)
Use this menu for common conversions,
such as currency and temperature.
1. Select a converter.
2. Press [Left] or [Right] to select the
original unit and press [Down].
3. Enter the value to be converted and
press [Down].
• Press [ ] to insert a decimal point.
• Press [ ] to change the temperature
to above zero (+) or below zero (-).
4. Press [Left] or [Right] to select the unit
to which you want to convert.
The equivalent value for the amount you
entered displays.
Menu functions
3.
4.
5.
Press <.()> to insert a decimal point
or bracket.
• Press [ ] or [ ] to move the cursor.
Press one of the Navigation keys to
access the math function you want.
Enter the second number.
Press [ ] to view the result.
If necessary, repeat from step 2 to
continue the calculation.
Starting the timer
1. Press <Set>.
2. Enter the length of time you want to
count down and press <OK>.
3. Press [ ] to start counting down.
Stopping the timer
•
•
Press any key when the timer rings.
Press [ ] on the Timer screen to stop the
timer before it rings.
41
Menu functions
Stopwatch (Menu 3.0)
Browser
Use this menu to measure elapsed time. The
maximum time is 10 hours.
1. Press [ ] to start the stopwatch.
2. Press [ ] to check an interval. You can
repeat this step for a total of 4 intervals.
The Wireless Application Protocol (WAP)
browser on your phone allows you to access
the wireless web. From the wireless web,
you can access up-to-date information and a
wide variety of media content, such as
games, wallpapers, ringtones, and music
files.
SIM AT (Menu 3.*)
This menu is available if you use a SIM AT
card that supports SIM Application Tool kit
menus and provides additional services,
such as news, weather, sports,
entertainment, and location services.
Available services may vary, depending on
your service provider’s plans. For details,
see your SIM card instructions or contact
your service provider.
42
(Menu 4)
To access this menu, press <Menu> in Idle
mode and select Browser.
Home (Menu 4.1)
Use this menu to connect your phone to the
network and load the homepage of the
wireless web service provider. You can also
press [ ] in Idle mode.
Navigating the web
To
Press
scroll through
browser items
[Up] or [Down].
Press
•
select a browser
item
[ ], or press
<Options> and
choose Select.
•
return to the
previous page
[C], or press
<Options> and
select Back.
Using page options
•
Exiting the browser
Press [ ] to end the network connection
and exit the browser.
Browser (Menu 4)
From any web page, press <Menu> to
access the following options:
• Bookmarks: bookmark the current
page or access the bookmark list.
• Reload: reload the current page with
updated information.
• Home: return to the homepage.
• Go to URL: enter a URL address
manually.
• Show URL: display the URL address of
the current web page. You can also set
the current page as the homepage for
the web browser or a bookmark.
•
Clear cache: clear the cache. The cache
is a temporary memory that stores
recently accessed web pages.
Inbox: access push messages in the
web browser.
Show images: display images on the
current page.
Certificates: access certificate
information.
Menu functions
To
Bookmarks (Menu 4.2)
Use this menu to save URL addresses in
order to quickly access web pages.
Adding a bookmark
1. Select an empty location.
2. Enter a title for the bookmark and press
[Down].
3. Enter a URL address and press <Save>.
43
Menu functions
Accessing a bookmarked page
Clear cache (Menu 4.5)
Selecting a bookmark item launches the web
browser and accesses the associated web
page.
Use this menu to clear information stored in
the cache.
Using bookmark options
Messaging (Menu 5)
After saving an item, press <Options> to
access the following options:
• Go to URL: access the bookmarked web
page.
• Edit: edit the URL address and title of
the bookmark.
• Delete: delete the selected bookmark or
all bookmarks.
To access this menu, press <Menu> in Idle
mode and select Messaging.
Create message (Menu 5.1)
http:// (Menu 4.3)
Use this menu to create and send messages.
Use this menu to manually enter a URL
address and access the associated web
page.
Text message (Menu 5.1.1)
WAP profile (Menu 4.4)
Use this menu to select a connection profile
to be used for accessing the wireless web.
You can also create or edit a profile.p. 76
44
Use the Messaging menu to send and
receive text messages and multimedia
messages. You can also access push
messages and cell broadcast messages.
Short Message Service (SMS) allows you to
send or receive text messages that may
include simple pictures, animated images,
and melodies.
Creating and sending an SMS message
1. Enter your message and press [ ].
Using options while composing an SMS
message
While composing a message, press
<Options> to access the following options:
• Save and send: save the message in
Outbox and then send it.
• Send only: just send the message.
• Insert: add a text template, Phonebook
entry, or bookmark.
•
•
•
•
Messaging (Menu 5)
2. Enter a destination number.
To send the message to more than one
recipient, fill in additional destination
fields.
3. Press [ ] to send the message.
•
Add image/Add animation/Add
melody: attach a simple image, an
animated image, or a melody.
Attach: attach a Phonebook entry as a
name card or calendar data as a data
format attachment.
Save to: save the message in another
folder.
Select language: change the language
to be used in T9 input mode.
Text style: change the text attributes.
Input method: change the text input
mode.
Menu functions
• The maximum number of characters
allowed in a message varies by service
provider. If your message exceeds the
maximum number of characters, the
phone will split the message.
• You can use various options by
pressing <Options>.next section
•
Multimedia message (Menu 5.1.2)
Multimedia Message Service (MMS) delivers
messages containing a combination of text,
image, video, and audio, from phone to
phone or from phone to e-mail.
Creating and sending an MMS message
1. Select the Subject line.
You can use various options by pressing
<Options> in each field.next section
45
Menu functions
2. Enter the message subject and press
[ ].
3. Select the Image and video line.
4. Select Add image or Add video and
add an image or a video clip.
• The maximum size allowed for a
message can differ, depending on your
service provider.
• Depending on the file type or DRM
(Digital Rights Management) system,
some files may not be able to be
forwarded.
5.
6.
7.
8.
9.
Select the Sound line.
Select Add sound and add a sound clip.
Select the Message line.
Enter the message text and press [ ].
When you have finished, press
<Options> and select Send.
10. Enter a phone number or an e-mail
address.
To send the message to more than one
recipient, fill in additional destination
fields.
11. Press [ ] to send the message.
46
Using options while composing an MMS
message
While composing a message, press
<Options> to access the following options:
• Add: add the message subject or
message text.
• Add image/Add video/Add sound:
add an image, a video clip, or a sound
clip.
• Edit: edit the subject or text.
• Preview: view the message as it will be
shown on the recipient’s phone.
• View: open the selected attachment.
• Send: send the message.
• Save to: save the message in another
folder.
• Add page: add pages. Move to each
page by pressing [Left] or [Right].
• Delete page: delete an added page.
• Edit page: change the duration of page
display or move the page forward among
the other pages.
•
•
•
My messages (Menu 5.2)
Inbox (Menu 5.2.1)
This folder stores all of the messages you
have received.
Viewing a message
The following icons may appear on the
message list to show the message type:
•
SMS
•
MMS
•
•
•
•
•
MMS notification ( : Being
retrieved,
: Failed to be retrieved)
Voicemail
Push message from web servers
Configuration message, containing
network parameters from the
service provider
CB (Cell broadcast) message from
your service provider
Delivery report for your sent
messages
Messaging (Menu 5)
Use this menu to access messages you have
received, sent, or which have failed in
sending.
•
Menu functions
•
Attach: attach a Phonebook entry as a
name card or calender data as a data
format attachment.
Change image/Change video/Change
sound: replace an added item.
Clear subject/Clear message: clear
the subject or text of the message.
Remove media/Remove sound/
Remove: remove an added item.
• Depending on the DRM (Digital Rights
Management) system, messages having
web content may not be able to be
forwarded.
• A ! icon next to a message means that the
message is of high priority. A greycoloured message icon indicates low
priority.
Using message options
While viewing a message, press <Options>
to access the following options:
47
Menu functions
SMS messages
• Reply via: reply to the sender via SMS
or MMS.
• Forward: forward the message to other
people.
• Delete: delete the message.
• Move to phone/Move to SIM: move
the message between the SIM card and
the phone’s memory.
• Copy entry: extract URLs, e-mail
addresses, or phone numbers from the
message.
• Copy media: save media content from
the message to your phone’s memory.
• Protection: lock the message to protect
it from being deleted, or unlock the
message. You can protect only those
messages stored in the phone’s memory.
• Block number: add the sender’s
number to the Block list to reject the
messages from the sender.
MMS messages
• Retrieve: retrieve the MMS message
from the MMS server.
48
•
•
•
•
•
•
•
•
Reply via text message: reply to the
sender via SMS.
Reply via multimedia message to:
reply to the sender via MMS.
Forward: forward the message to other
people.
Delete: delete the message.
Copy entry: extract URLs, e-mail
addresses, or phone numbers from the
message.
Copy media: save media content from
the message to your phone’s memory.
Protection: lock the message to protect
it from being deleted, or unlock the
message.
Details: access the message properties.
Configuration messages
• Install: apply the configuration specified
in the message to your phone.
• Delete: delete the message.
• Protection: lock the message to protect
it from being deleted, or unlock the
message.
Delivery reports
• Delete: delete the report.
• Copy entry: extract URL, e-mail
addresses, or phone numbers from the
report.
Protection: lock the message to protect
it from being deleted, or unlock the
message.
Drafts (Menu 5.2.2)
This folder stores messages you have saved
to send at a later time.
Outbox (Menu 5.2.3)
This folder stores messages that the phone
is attempting to send or has failed to send.
The following icons are available to show the
message status:
•
Being sent
•
Failed to be sent
While viewing a message, press <Options>
to access the following options:
• Send again: retry sending the message.
• Forward: forward the message to other
people.
• Copy entry: extract URLs, e-mail
addresses, or phone numbers from the
message.
• Delete: delete the message.
49
Messaging (Menu 5)
CB messages
• Save: save the message to the phone’s
memory.
• Copy entry: extract URLs, e-mail
addresses, or phone numbers from the
message.
• Delete: delete the message.
•
Menu functions
Push messages
• Go to URL: connect to the URL specified
in the message.
• Delete: delete the message.
• Copy entry: extract URLs, e-mail
addresses, or phone numbers from the
message.
• Protection: lock the message to protect
it from being deleted, or unlock the
message.
Menu functions
•
•
Protection: lock the message to protect
it from being deleted, or unlock the
message.
Details: access the message properties.
Sent messages (Menu 5.2.4)
This folder stores messages that you have
sent.
While viewing a message, press <Options>
to access the following options:
• Forward: forward the message to other
people.
• Copy entry: extract URLs, e-mail
addresses, or phone numbers from the
message.
• Delete: delete the message.
• Protection: lock the message to protect
it from being deleted, or unlock the
message.
• Details: access the message properties.
My folders (Menu 5.2.5)
Use this menu to create new folders and
organise your messages.
50
Creating a folder
1. Press <Yes>.
2. Enter a folder name and press <OK>.
Using folder options
On the folder list, press <Options> to
access the following options:
• Open: open the selected folder.
• Add folder: add a new folder.
• Rename folder: change the folder
name.
• Delete: delete the selected folder.
Templates (Menu 5.3)
Use this menu to create SMS templates with
the sentences you use frequently so that you
can retrieve and insert them when
composing an SMS message.
Creating a template
1. Select an empty location.
2. Enter a message and press <OK>.
Using template options
Settings (Menu 5.5)
From the template list, press <Options> to
access the following options:
• Edit: edit the selected template.
• Send message: create and send a new
message.
• Delete: delete the selected template.
• Add new: add a new template.
Use this menu to set up various options for
using the messaging service.
Messaging (Menu 5)
Use this menu to delete messages in each
message folder all at once.
1. Press [ ] to select the message folders
to be cleared.
Pressing the key twice displays the
message types so that you can specify
the ones to be cleared.
2. Press <Delete>.
3. Press [ ] to select the check box to
delete protected messages, and then
press <Yes>.
4. Press <Yes> to confirm the deletion.
You can configure SMS settings.
• Send settings: set up the options for
sending SMS messages:
Reply path: allow recipients to reply to
you through your SMS server.
Delivery report: set the network to
inform you when your messages have
been delivered.
Character support: select a character
encoding type. When you select
Automatic, the phone switches the
encoding type from GSM-Alphabet to
Uni-Code if you enter a Unicode
character. Use of Unicode encoding will
reduce the maximum number of
characters in a message to about half. If
this menu is not shown, your phone
provides automatic character encoding
by default.
Menu functions
Delete all (Menu 5.4)
Text message (Menu 5.5.1)
51
Menu functions
•
•
•
52
Bearer selection: select either GSM or
GPRS preferred, depending on your
network.
Block number: store the phone
numbers from which you want to reject
messages.
Current profile: select an SMS setting
profile.
Profile settings: set the properties of
each profile.
Service centre: store or change the
number of your SMS server.
Default destination: enter the default
destination. It will be displayed in the
first field on the Recipients field.
Default type: set the default message
type. The network can convert the
messages into the selected format.
Default validity: set the length of time
your messages are stored in the SMS
server.
Setting name: enter a profile name.
Multimedia message (Menu 5.5.2)
You can configure MMS settings.
• Sending settings: set up the options
for sending MMS messages:
Delivery report: set the network to
inform you when your messages have
been delivered.
Hide address: set your address to be
hidden from the recipient’s phone.
Read reply: send a read-reply request
along with your messages.
Priority: set the priority level of
messages.
Expiry date: set the length of time
messages are stored in the MMS server.
Delivery time: set a time delay before
messages are sent.
Outgoing message size: select a
maximum size allowed for messages.
Available message size may vary,
depending on your country.
• Retrieve settings: set up the options
for receiving MMS messages:
•
Profile: select a connection profile to be
used for MMS. You can also create or edit
a profile.p. 76
Push message (Menu 5.5.3)
You can change the settings for receiving
push messages from the wireless web
server.
• Receive: set how your phone receives
push messages.
• Black list: manage blocked server
addresses.
Menu functions
Messaging (Menu 5)
Reject unknown senders: reject
messages from unknown senders.
Allow adverts: accept advertisements.
Allow information: accept information
messages.
Allow reports: set the network to
inform the sender when a message has
been delivered to you.
Recep. in home network: determine if
your phone retrieves new messages
automatically when you are in your
home service area.
Reception when abroad: determine if
your phone retrieves new messages
automatically when you are roaming on
another network.
Reception within home network or
abroad has the following options:
- Manual: the phone displays
notifications. Use the Retrieve option
to manually download new messages.
- Automatic: the phone automatically
retrieves messages from the server.
- Reject: the phone rejects all
messages.
Broadcast (Menu 5.5.4)
You can change the settings for receiving
broadcast messages.
• Receive: select to receive broadcast
messages, or not.
• Channel list: indicate the channels from
which you wish to receive broadcast
messages. Please contact your service
provider for further details.
• Language: select the preferred
languages in which broadcast messages
display.
53
Menu functions
Memory status (Menu 5.6)
Viewing an image
Use this menu to view the amount of
memory currently in use in each message
folder.
1. Select an image folder.
2. Select an image.
File manager (Menu 6)
The File manager menu allows you to
access image, video, and sound files stored
in the phone’s memory.
To access this menu, press <Menu> in Idle
mode and select File manager.
According to the DRM (Digital Rights
Management) system, messages having web
content may not be able to be forwarded.
They are indicated by the
icon.
Images (Menu 6.1)
This menu displays photos you have taken
and images you have downloaded, received
in messages, or imported from a computer.
54
Viewing a slide show
You can view your photos as a slide show, a
sequential presentation of each photo in the
current folder.
1. Select Photos.
2. Press <Options> and select Slide
show.
3. Select an interval option.
The slide show begins.
4. Press <Stop> to stop the slide show.
Using image options
While viewing an image, press <Options>
to access the following options:
• List: return to the image list.
• Send via: send the file via MMS or
Bluetooth.
• Set as: set the image as your wallpaper
for the display or as a caller ID image for
a Phonebook entry.
•
•
•
•
•
•
Videos (Menu 6.2)
This menu displays video clips you have
recorded, downloaded, received in
messages, or imported from a computer.
Video clips recorded on other devices, such
as camcorders, may not play correctly.
1. Select a video folder.
2. Select a video clip.
During playback, use the following keys:
Key
Function
Pauses or resumes playback.
/
Down
Adjusts the volume.
Stops playback.
File manager (Menu 6)
•
Playing a video clip
Menu functions
•
Delete: delete the file.
Rename: change the file name.
Move to Favourite images: move the
file to the Favourite images folder.
Move to Downloaded images: move
the file to the Downloaded images
folder.
Move to Photos: move the file to the
Photos folder.
Bluetooth visibility: share the file or all
files with other Bluetooth devices.
Protection: lock the file to protect it
from being deleted, or unlock the file.
Details: access the file properties.
Using video options
From a video screen, press <Options> to
access the following options:
• List: return to the video list.
• Send via: send the file via MMS or
Bluetooth.
• Set as wallpaper: set the video clip as
your wallpaper for the display.
• Delete: delete the file.
• Rename: change the file name.
• Move to Favourite videos: move the
file to the Favourite videos folder.
55
Menu functions
•
•
•
•
•
Move to Downloaded videos: move
the file to the Downloaded videos
folder.
Move to Video clips: move the file to
the Video clips folder.
Bluetooth visibility: share the file or all
files with other Bluetooth devices.
Protection: lock the file to protect it
from being deleted, or unlock the file.
Details: access the file properties.
Music (Menu 6.3)
Use this menu to access music files you have
downloaded or imported from your
computer.
Select a file. The music player opens.
p. 35
Sounds (Menu 6.4)
This menu displays voice memos you have
recorded, and sound files you have
downloaded, received in messages, or
imported from a computer.
56
Playing a sound clip
1. Select a sound folder.
2. Select a sound clip. For a voice memo,
see Voice recorder.p. 37
Using sound options
From a sound screen, press <Options> to
access the following options:
• List: return to the sound list.
• Send via: send the file via MMS or
Bluetooth.
• Set as: set the file as your ringtone or
as a ringtone for a Phonebook entry.
• Delete: delete the file.
• Rename: change the file name.
• Move to Favourite sounds: move the
file to the Favourite sounds folder.
• Move to Downloaded sounds: move
the file to the Downloaded sounds
folder.
• Move to Voice recording list: move
the file to the Voice recording list
folder.
•
•
•
Bluetooth visibility: share the file or all
files with other Bluetooth devices.
Protection: lock the file to protect it
from being deleted, or unlock the file.
Details: access the file properties.
Files that you have received but which are
not supported by your phone are stored in
this folder. You cannot open these files on
the phone.
Calendar (Menu 7)
The Calendar menu enables you to keep
track of your schedule.
To access this menu, press <Menu> in Idle
mode and select Calendar.
Calendar (Menu 7)
From the file list, press <Options> to
access the following options:
• Send via: send the file via Bluetooth.
• Delete: delete the selected file or all
files.
• Rename: change the file name.
• Bluetooth visibility: share the file or all
files with other Bluetooth devices.
• Protection: lock the file to protect it
from being deleted, or unlock the file.
• Details: access the file properties.
Use this menu to view memory information
for media items in each folder. Press [Left]
or [Right] to view the memory status by size
or number of items.
Menu functions
Other files (Menu 6.5)
Memory status (Menu 6.6)
Selecting a day on the calendar
When you enter the Calendar menu, the
calendar in Month view appears with today’s
date indicated by a blue box.
• Press [Left] or [Right] to move by day.
• Press [Up] or [Down] to move by week.
• Press [ / ] to move by month.
Creating an item
You can store schedule items, anniversaries,
memos, and To do items on the calendar.
More than one item per day can be stored.
57
Menu functions
Entering a schedule item
1. Select a date on the calendar.
2. Press <Options> and select Create →
Schedule.
3. Enter information or change the settings:
• Subject: enter a title for the item.
• Details: enter item details.
• Start date and Start time: enter
the starting date and time for the
item.
• AM/PM: select AM or PM in 12-hour
time format.
• End date and End time: enter the
ending date and time for the item.
• AM/PM: select AM or PM in 12-hour
time format.
• Location: enter information about
the item location.
• Alarm: set an alarm for the item.
• Before: set how long before the item
the alarm is to alert you.
• Alarm tone: select an alarm tone.
• Repeat: set the item to recur and
select a repeat option.
58
Until: set the ending date, if the item
will recur.
4. Press <Save> to save the item.
•
Entering an anniversary
1. Select a date on the calendar.
2. Press <Options> and select Create →
Anniversary.
3. Enter information or change the settings:
• Occasion: enter information about
the anniversary.
• Date: enter the date.
• Alarm: select to set an alarm for the
anniversary.
• Before: set how long before the
anniversary the alarm is to alert you.
• Alarm time: enter the time for the
alarm to sound.
• AM/PM: select AM or PM in 12-hour
time format.
• Alarm tone: select an alarm tone.
• Repeat every year: set the phone
to remind you of the anniversary
every year.
4. Press <Save> to save the anniversary.
•
Schedule item •
Anniversary
Entering a memo
•
To do item
Memo
Entering a To do item
Consulting the calendar
Once you have created items, the item icons
and the number of items for a specific day
appear at the bottom of the calendar.
1. Select a date on the calendar to display
the items for the day.
2. Select an item to view its details.
3. Press [Left] or [Right] to access the
other items scheduled for the selected
day.
While viewing an item, press <Options> to
access the following options:
• Edit: edit the item.
• Create: add a new item.
• Send via: send the item via SMS, MMS,
or Bluetooth.
• View mode: change the view mode of
the calendar.
• Delete: delete the item.
• Memory status: access memory
information for the items stored on the
calendar.
Calendar (Menu 7)
1. Select a date on the calendar.
2. Press <Options> and select Create →
To do.
3. Enter information or change the settings:
• To do: enter information about the
item.
• Start date: enter the starting date.
• Due date: enter the ending date.
• Select priority: select a priority
level.
4. Press <Save> to save the item.
Viewing an item
Menu functions
1. Select a date on the calendar.
2. Press <Options> and select Create →
Memo.
3. Enter a memo and press <Save>.
•
59
Menu functions
Using calendar options
Viewing items in a different mode
On the calendar, press <Options> to access
the following options:
• View mode: change the view mode of
the calendar.next section
• Create: add a new item.p. 57
• Go to: enter the specific date you want
to access.
• Sort by: sort items by type of item.
• Delete: delete the items stored on the
calendar by using various deleting
options.
You can change the calendar display to Day
view or Week view. Press <Options> and
select View mode → a view mode.
You can delete recurring items in Day
view only.
•
•
60
Missed alarm events: view items
whose alarms you have missed.
Memory status: access memory
information for the items stored on the
calendar.
Day view
You can view items for the selected date.
Select an item to view its details.
The following icons may display to indicate
the item status:
•
Alarm set
•
Recurring item
•
To do item priority ( : high,
:
normal,
: low)
•
Completed To do item
Week view
You can view items for the selected week. A
cell on the timetable indicates the presence
of item information. Select a cell in the day
you want.
Camera (Menu 8)
You can use the camera module embedded
in your phone to take photos and record
videos.
Taking a photo
You can take photos in various modes. The
camera produces JPEG photos.
When you take a photo in direct sunlight or
in bright conditions, shadows may appear on
the photo.
1. Access the Camera menu or press and
hold [ ] to turn on the camera.
4. To
Press
access photo
options
<Options>.p. 63
delete the photo
[C] and then
<Yes>.
return to Capture
mode
<Preview>.
Camera (Menu 8)
• Do not take photos of people without their
permission.
• Do not take photos in a place where
cameras are not allowed.
• Do not take photos in a place where you
may interfere with another person’s
privacy.
Menu functions
To access this menu, press <Menu> in Idle
mode and select Camera, or press and hold
[ ].
2. Make any desired adjustments.
• Press < > to access camera
options.next section
• Use the keypad to change the camera
settings or switch to other
modes.p. 62
3. Press [ ] or [ ] to take a photo. The
photo is saved in the Photos folder.
Using camera options in Capture
mode
In Capture mode, press < > to access the
following options:
• Record video: switch to Record mode.
61
Menu functions
•
•
•
•
•
•
62
Shooting mode: take a photo in the
following modes:
Single shot: take a photo in normal
mode. You can select whether or not the
camera automatically saves a photo.
Multi-shot: take a series of action stills.
You can select the number of photos the
camera will take and the shooting speed.
Mosaic shot: take several stills and
save them in one frame. You can select
the layout.
Effects: change the colour tone or apply
a special effect.
Frames: apply a decorative frame.
Timer: set a time delay before the
camera takes a photo.
Go to photos: access the Photos folder.
Settings: change the default settings for
taking a photo.
Size: select an image size.
Quality: select an image quality setting.
Viewfinder: select a preview screen.
•
Shutter sound: select the sound that
you hear when you press the shutter
release, [ ].
Zoom sound: turn the sound effect for
zooming on or off.
Brightness sound: turn the sound
effect for brightness adjustment on or
off.
Shortcuts: view the functions of the
keys you can use in Capture mode.
Using the keypad in Capture mode
You can use the keypad to customise your
camera settings in Capture mode.
Key
Function
Left/Right
Adjusts the brightness.
Up/Down
Zooms in or out.
Flips the image vertically.
Shows the mirror image.
1
Switches to Record mode.
p. 63
2
Changes the image size.
•
•
•
3
Changes the image quality.
4
Changes the shooting mode.
5
Changes the colour tone or
applies a special effect.
7
Selects a decorative frame.
8
Sets the timer.
Recording a video
0
Goes to the Photos folder.
You can record a video of what is displayed
on the camera screen and save it.
1. In Capture mode, press [1].
2. Make any desired adjustments.
• Press < > to access camera
options.next section
• Use the keypad to change the camera
settings or switch to other
modes.p. 64
3. Press [ ] or [ ] to start recording.
4. Press [ ], < >, or [ ] to stop
recording. The video is automatically
saved in the Video clips folder.
Changes the preview screen.
Using photo options
After saving a photo, press <Options> to
access the following options:
• View: access one of the multi-shot
photos.
• Take another: return to Capture mode.
• Send via: send the file via MMS or
Bluetooth.
• Set as: set the photo as your wallpaper
for the display or as a caller ID image for
a Phonebook entry.
•
•
Camera (Menu 8)
Function
Menu functions
Delete: delete the file.
Rename: change the file name.
Go to photos: access the Photos
folder.p. 54
Protection: lock the file to protect it
from being deleted, or unlock the file.
Details: access the file properties.
Key
63
Menu functions
5. To
play back the video
clip
Press
[ ].
access video options <Options>.
p. 65
64
delete the video clip
[C] and then
<Yes>.
return to Record
mode
<Preview>.
•
Size: select a frame size.
Viewfinder: select a preview screen.
Audio record: record audio with a video
clip.
Zoom sound: turn the sound effect for
zooming on or off.
Brightness sound: turn the sound
effect for brightness adjustment on or
off.
Shortcuts: view the functions of the
keys you can use in Record mode.
Using camera options in Record mode
Using the keypad in Record mode
In Record mode, press < > to access the
following options:
• Take photo: switch to Capture mode.
• Effects: change the colour tone or apply
a special effect.
• Timer: set a time delay before the
camera starts recording.
• Go to videos: access the Video clips
folder.
• Settings: change the following settings
for recording a video:
You can use the keypad to customise your
camera settings in Record mode:
Key
Function
Left/Right Adjusts the brightness.
Up/Down
Zooms in or out.
Flips the image vertically.
Shows the mirror image.
1
Switches to Capture mode.
p. 61
Go to videos: access the Video clips
folder.p. 55
Protection: lock the file to protect it
from being deleted, or unlock the file.
Details: access the file properties.
•
2
Changes the frame size.
•
5
Changes the colour tone or
applies a special effect.
•
7
Mutes or unmutes audio.
8
Sets the timer.
Settings (Menu 9)
0
Goes to the Video clips folder.
The Settings menu provides you with
various setting options to customise the
phone to your preferences and needs. You
can also reset the settings to their default
status.
Changes the preview screen.
Using video options
After saving a video clip, press <Options>
to access the following options:
• Record another: return to Record
mode.
• Send via: send the file via MMS or
Bluetooth.
• Set as wallpaper: set the video clip as
your wallpaper for the display.
• Delete: delete the file.
• Rename: change the file name.
Settings (Menu 9)
Function
Menu functions
Key
To access this menu, press <Menu> in Idle
mode and select Settings.
Time and date (Menu 9.1)
Use this menu to change the time and date
displayed on your phone. Before setting the
time and date, specify your time zone in the
World clock menu.p. 39
• Set time: enter the current time.
• AM/PM: select AM or PM in 12-hour
time format.
65
Menu functions
•
•
•
Time format: select a time format.
Set date: enter the current date.
Calendar starting day: set which day
of the week the calendar starts with.
Phone settings (Menu 9.2)
Many different features of your phone’s
system can be customised to suit your
preferences.
Some menus may not be available,
depending on your service provider.
Language (Menu 9.2.1)
Use this menu to select a language for the
display text. If you select Automatic, the
phone uses the same language as the SIM
card.
Greeting message (Menu 9.2.2)
Use this menu to enter the greeting that is
displayed briefly when the phone is switched
on.
66
Shortcuts (Menu 9.2.3)
You can use the Navigation keys as
shortcuts to access specific menus directly
from Idle mode. Use this menu to assign a
shortcut to a key.
Assigning a shortcut menu
1. Select a key to be used as a shortcut
key.
2. Select a menu to be assigned to the key.
Using shortcut options
Press <Options> to access the following
options:
• Change: assign or change a shortcut
menu.
• Remove: deactivate the shortcut
assignment to the selected key.
• Remove all: deactivate all shortcut
assignments.
Auto keypad lock (Menu 9.2.4)
Use this menu to select the length of time
the phone locks the keypad automatically
when the display turns off.
Volume key (Menu 9.2.5)
Use this menu to set whether the phone
mutes the call ringer or rejects a call if you
press and hold [ / ] when a call comes in.
Display settings (Menu 9.3)
Use this menu to change settings for the
display and backlight.
Wallpaper (Menu 9.3.1)
You can set up the idle screen on the display.
• Wallpaper image: select an image or a
video clip to be displayed for the idle
screen.
Skin (Menu 9.3.2)
Settings (Menu 9)
You can turn the automatic redialling or
answering feature on or off.
• Auto redial: set the phone to make up
to ten attempts to redial a phone number
after an unsuccessful call.
• Anykey answer: answer an incoming
call by pressing any key, except for
<Reject> and [ ].
•
•
•
Text position: select a text position. If
you do not want to display text in Idle
mode, select Off.
Text mode: select a font style.
Text colour: select a font colour.
Graphic logo: set the phone to display a
graphic icon instead of the service
provider’s logo on the idle screen. This is
only available if a graphic icon has been
received in a message.
Menu functions
Extra settings (Menu 9.2.6)
•
You can select a skin colour pattern for Menu
mode.
Brightness (Menu 9.3.3)
You can adjust the brightness of the display
for varying lighting conditions.
Backlight (Menu 9.3.4)
You can select the length of time the
backlight stays on or the length of time the
display stays on in Dim mode, in which the
backlight is off.
67
Menu functions
•
•
Main display normal: select the length
of time the backlight stays on.
Main display dim: select the length of
time the display stays on in Dim mode
after the backlight turns off. After a
specified time, the display turns off.
Dialling display (Menu 9.3.5)
Use this menu to select a font colour for the
numbers entered while dialling.
Show caller information (Menu 9.3.6)
Use this menu to set the phone to display
missed call notifications with the most
recently missed caller’s information.
Sound settings (Menu 9.4)
Use this menu to customise various sound
settings.
Incoming call (Menu 9.4.1)
Use this menu to change the sound settings
for incoming calls.
• Ringtone: select a ringtone to be used
for the call ringer.
68
•
•
Volume: select a ringtone volume.
Alert type: specify how you are to be
informed of incoming calls.
Keypad tone (Menu 9.4.2)
Use this menu to select the tone that the
phone sounds when you press a key.
You can adjust the key tone volume using
[ / ] in Idle mode.
Message tone (Menu 9.4.3)
Use this menu to change the sound settings
for incoming SMS messages, MMS
messages, and broadcast messages
individually.
• Tone: select one of several message
tones.
• Alert type: specify how you are to be
informed when a message comes in.
• Repetition: specify how often the phone
informs you of a new message.
Power on/off (Menu 9.4.4)
Use this menu to select the melody that the
phone sounds when it is switched on or off.
Silent mode (Menu 9.4.5)
Network services (Menu 9.5)
Use this menu to set how the phone acts to
alert you to a specific event while in Silent
mode.
Use this menu to access network services.
Please contact your service provider to
check their availability and subscribe to
them, if you wish.
Call diverting (Menu 9.5.1)
This network service reroutes incoming calls
to a phone number that you specify.
1. Select a call diverting option:
• Divert always: divert all calls.
• Busy: divert calls when you are on
another call.
• No reply: divert calls when you do
not answer the phone.
• Unreachable: divert calls when you
are not in a service area or when
your phone is switched off.
• Cancel all: cancel all call diverting
options.
2. Select the type of calls to be diverted.
3. Select Activate. To deactivate call
diverting, select Deactivate.
4. Move to the Divert to line.
Settings (Menu 9)
Use this menu to customise additional tones
for the phone.
• Minute minder: set the phone to beep
every minute during an outgoing call to
keep you informed of the length of your
call.
• Connection tone: set the phone to
beep when an outgoing call is connected
to the system.
• Alert on call: set the phone to beep
when you receive a new message or
when the time for an alarm comes during
a call.
• Indicative tone: set the phone to beep
when a pop-up window displays.
Menu functions
Extra tones (Menu 9.4.6)
69
Menu functions
5. Enter the number to which calls are to be
diverted.
6. If you selected No reply, move to the
Seconds line and select the length of
time the network delays before diverting
a call.
7. Press <Select>.
Call barring (Menu 9.5.2)
This network service allows you to restrict
your calls.
1. Select a call barring option:
• All outgoing calls: prohibit all
outgoing calls.
• International: prohibit international
calls.
• International except home: only
allow calls to numbers within the
current country when you are
abroad, and to your home country.
• All incoming calls: prohibit
incoming calls.
• Incoming while abroad: prohibit
incoming calls when you use your
phone outside of your service area.
70
Cancel all: cancel all call barring
settings, allowing calls to be sent and
received normally.
• Change barring password: change
the call barring password obtained
from your service provider.
2. Select the type of calls to be barred.
3. Select Activate. To deactivate call
barring, select Deactivate.
4. Enter the call barring password supplied
by your service provider and press
<Select>.
•
Call waiting (Menu 9.5.3)
This network service informs you when
someone is trying to reach you while you are
on another call.
1. Select the type of calls to which call
waiting option will apply.
2. Select Activate and press <Select>. To
deactivate call waiting, select
Deactivate.
Network selection (Menu 9.5.4)
Caller ID (Menu 9.5.5)
Some networks may not allow you to change
this setting.
Voice mail server (Menu 9.5.6)
Use this menu to store the number of the
voicemail server and access your voicemails.
You must store the voicemail server number
before accessing the server. Your service
provider can give you the number.
•
Connect to voice server: connect to
the voicemail server to listen to your
messages.
Voice server number: enter the
voicemail server number.
Closed user group (Menu 9.5.7)
Use this menu to set incoming and outgoing
calls to be restricted to a selected user
group. For details about how to create a
closed user group (CUG), contact your
service provider.
• Index list: add, delete, or activate CUG
index numbers.
• Outside access: enable calls to
numbers other than those in the closed
user group. This feature depends on the
nature of your CUG subscription.
• Default group: enable the default CUG,
if you have set one with your service
provider. When making a call, you are
given the option of using your default
CUG, instead of selecting one from the
list.
Settings (Menu 9)
This network service allows you to hide your
phone number from the person you are
calling. If you select Default, the phone will
use the default setting provided by the
network.
•
Menu functions
This network service allows you to either
automatically or manually select the
network to be used while roaming outside of
your home area. You can select a network
other than your home network only if there
is a valid roaming agreement between the
two.
71
Menu functions
Bluetooth (Menu 9.6)
Setting up the Bluetooth feature
Using the Bluetooth feature, you can
connect the phone wirelessly to other
Bluetooth devices and exchange data with
them, talk hands-free, or control the phone
remotely.
The Bluetooth menu provides the following
options:
• Activation: activate or deactivate the
Bluetooth feature.
• My devices: search for connectable
Bluetooth devices.
• My phone’s visibility: allow other
Bluetooth devices to locate your phone,
or not.
• My phone’s name: assign a Bluetooth
device name to your phone, which is
then displayed on other devices.
• Secure mode: determine if the phone
asks for your confirmation when other
devices access your data.
• Bluetooth services: display available
Bluetooth services.
Bluetooth technology allows free wireless
connections between all Bluetooth-compliant
devices within a range of 10 metres. Since
the devices communicate using radio waves,
they do not need to be in line of sight to
each other.
• If there are obstacles between the
devices, the operating distance may be
reduced.
• It is recommended that you do not use the
Bluetooth feature while using multimedia
features, such as voice recorder, camera,
and music player, or vice versa, for better
performance.
• Some devices may not be compatible with
your phone.
Searching for and pairing with a
Bluetooth device
1. From the Bluetooth menu, select My
devices.
72
2. Select Search for new devices.
After searching, a list of devices to which
you can connect displays. The following
icons indicate the type of device:
Some devices, especially headsets or handsfree car kits, may have a fixed Bluetooth
PIN, such as 0000. If the other device has a
code, you must enter it.
PDA
Using device options
Computer
•
Printer
•
Unknown
device
•
Mono headset/
Hands-free car
kit
From the device list, press <Options> to
access the following options:
• Connect: connect to a headset or
hands-free car kit.
• Disconnect: end the connection with
the connected device.
• Browse files: search for data from the
device and import data directly to your
phone.
• Service list: access the Bluetooth
service list of the device.
• Rename: rename the paired device.
• Authorise device/Unauthorised
device: determine whether or not the
phone asks you to permit connection
when other devices try to connect to
your phone.
• Delete: remove the selected device or
all devices from the list.
The colour of the icon indicates the
status of the the device:
• Grey for unpaired devices
• Blue for paired devices
• Red for devices that are currently
connected to your phone
3. Select a device.
4. Enter a Bluetooth PIN and press <OK>.
This code is used just once and you do
not need to memorise it.
When the owner of the other device
enters the same code, pairing is
complete.
Settings (Menu 9)
Mobile phone •
•
Menu functions
•
73
Menu functions
Sending data via Bluetooth
Security (Menu 9.7)
1. Activate the Bluetooth feature.
2. Select the application in which the item
you want to send is stored.
3. Scroll to the item you want and press
<Options>.
4. Select Send via → Bluetooth.
5. Select Search for new devices.
The phone searches for devices within
range and displays a list of available
devices.
6. Select a device.
7. If necessary, enter the Bluetooth PIN
needed for pairing and press <OK>.
Use this menu to protect the phone against
unauthorised use by managing the several
access codes of your phone and SIM card.
Receiving data via Bluetooth
To receive data via Bluetooth, your phone’s
Bluetooth feature must be active and its
visibility must be enabled.
If an unauthorised Bluetooth device sends
data to your phone, press <Yes> to allow
the device to access your phone.
74
If you enter an incorrect PIN/PIN2 three
times, the SIM card is blocked. To unblock it
you need to enter your PUK/PUK2 (Personal
Unblocking Key). The codes are supplied by
your service provider.
PIN check (Menu 9.7.1)
The 4- to 8-digit PIN (Personal Identification
Number) protects your SIM card against
unauthorised use. When this feature is
enabled, the phone requires your PIN each
time it is switched on.
Change PIN code (Menu 9.7.2)
Use this menu to change your PIN. The PIN
check feature must be enabled to change
the PIN.
Phone lock (Menu 9.7.3)
SIM lock (Menu 9.7.6)
Use this menu to lock the phone from
unauthorised use.
This menu allows your phone to work only
with the current SIM by assigning a SIM lock
code. You must enter the SIM lock code to
use a different SIM card.
The password is preset to 00000000. To
change the password, use the Change
password menu.
Change password (Menu 9.7.4)
Privacy (Menu 9.7.5)
Use this menu to lock access to messages,
files, or all menu functions on the phone,
except for call functions.
When a privacy option is enabled, you must
enter the phone password to access the
locked items or functions.
Fixed dialling mode (Menu 9.7.7)
If supported by your SIM card, Fixed Dialling
Number (FDN) mode restricts your outgoing
calls to a limited set of phone numbers.
When this feature is enabled, you can make
calls only to phone numbers stored on the
SIM card.
Settings (Menu 9)
Use this menu to change your phone
password.
Menu functions
When this feature is enabled, you must
enter a 4- to 8-digit phone password each
time the phone is switched on.
Change PIN2 code (Menu 9.7.8)
If supported by your SIM card, use this
menu to change your current PIN2.
Connection settings (Menu 9.8)
Use this menu to create and customise the
profiles containing the settings for
connecting your phone to the network. You
need these settings to use the web browser
or send MMS messages.
75
Menu functions
Your phone is set up by default for
connecting to the network. If you change the
settings without first checking with your
service provider, the web browser and MMS
features may not work properly.
Creating a profile
1. Press <New>. If a profile has already
been saved, press <Options> and
select Add new connection.
2. Specify each information:
• Profile name: enter a profile name.
• Homepage URL: enter the URL
address of the page to be used as
your homepage.
• Proxy: activate or deactivate the
proxy server.
• IP address: enter the IP address of
the proxy server.
• Port: enter the port number of the
proxy server.
• DNS: activate or deactivate the DNS
(Domain Name Server) addresses.
• DNS1 and DNS2: enter the primary
and secondary DNS addresses.
76
Bearer: select the network bearer
type.
• Advanced settings: change the
advanced options. Depending on the
bearer setting, available options vary.
When the bearer is set to GPRS:
APN: enter the access point name.
Login ID: enter the login ID.
Password: enter the login
password.
When the bearer is set to GSM:
Dial number: enter the PPP phone
number.
Login ID: enter the login ID.
Password: enter the login
password.
Data call type: select a call type for
data transmission.
3. Press <Save> to save the profile.
•
Using profile options
Press <Options> to access the following
options:
• Edit: edit the selected profile.
•
•
Delete: delete the profile.
Add new connection: add a new
profile.
Reset settings (Menu 9.9)
Use this menu to reset the phone’s settings
you have changed.
1. Press [ ] to select the setting categories
to be reset.
2. Press <Reset>.
3. Press <Yes> to confirm the reset.
4. Enter the phone password and press
<OK>.
The password is preset to 00000000.
You can change this password.p. 75
Solve problems
Help and personal needs
To save the time and expense of an
unnecessary service call, perform the simple
checks in this section before contacting a
service professional.
When you switch on your phone, the
following messages may appear:
“Insert SIM card”
• Be sure that the SIM card is correctly
installed.
“Enter password”
• The automatic locking function has been
enabled. You must enter the phone’s
password before you can use the phone.
“Enter PIN”
• You are using your phone for the first
time. You must enter the PIN supplied
with the SIM card.
• The PIN check feature is enabled. Every
time the phone is switched on, the PIN
has to be entered. To disable this
feature, use the PIN check menu.
77
Solve problems
“Enter PUK”
• The PIN code has been entered
incorrectly three times, and the phone is
now blocked. Enter the PUK supplied by
your service provider.
“No service,” “Network failure,” or “Not
done” displays
• The network connection has been lost.
You may be in a weak signal area. Move
and try again.
• You are trying to access an option for
which you have no subscription with your
service provider. Contact the service
provider for further details.
You have entered a number but it was
not dialled
• Be sure that you have pressed [ ].
• Be sure you have accessed the right
cellular network.
• Be sure that you have not set an
outgoing call barring option.
Your correspondent cannot reach you
• Be sure that your phone is switched on.
([ ] pressed for more than one
second.)
78
•
•
Be sure that you are accessing the
correct cellular network.
Be sure that you have not set an
incoming call barring option.
Your correspondent cannot hear you
speaking
• Be sure that you have switched on the
microphone.
• Be sure that you are holding the phone
close enough to your mouth. The
microphone is located at the bottom of
the phone.
The phone starts beeping and
“Warning. Low battery” flashes on the
display
• Your battery is insufficiently charged.
Recharge the battery.
The audio quality of the call is poor
• Check the signal strength indicator on
the display (
). The number of bars
indicates the signal strength from strong
(
) to weak ( ).
• Try moving the phone slightly or moving
closer to a window if you are in a
building.
No number is dialled when you re-call a
Phonebook entry
• Use the Contact list menu to ensure the
number has been stored correctly.
• Re-store the number, if necessary.
The battery does not charge properly or
the phone sometimes turns itself off
• Wipe the charging contacts both on the
phone and on the battery with a clean
soft cloth.
If the above guidelines do not help you
to solve the problem, take note of:
• The model and serial numbers of your
phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung
after-sales service.
Health and safety
information
SAR certification information
This phone meets European Union (EU)
requirements concerning exposure to radio
waves.
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured to
not exceed the limits for exposure to radiofrequency (RF) energy, as recommended by
the EU Council. These limits are part of
comprehensive guidelines and establish
permitted levels of RF energy for the general
population. The guidelines were developed
by independent scientific organisations
through the periodic and thorough
evaluation of scientific studies. The limits
include a substantial safety margin designed
to ensure the safety of all persons,
regardless of age and health.
The exposure standard for mobile phones
employs a unit of measurement known as
Specific Absorption Rate (SAR). The SAR
limit recommended by the EU Council is
2.0W/kg.*
79
Health and safety information
The highest SAR value for this model phone
was 0.515 W/kg.
SAR tests are conducted using standard
operating positions with the phone
transmitting at its highest certified power
level in all tested frequency bands. Although
the SAR is determined at the highest
certified power level, the actual SAR level of
the phone while operating can be well below
the maximum value. This is because the
phone is designed to operate at multiple
power levels so as to use only the power
required to reach the network. In general,
the closer you are to a base station, the
lower the power output of the phone.
Before a new model phone is available for
sale to the public, compliance with the
European R&TTE Directive must be shown.
This directive includes as one of its essential
requirements the protection of the health
and safety of the user and any other person.
* The SAR limit for mobile phones used by the public is 2.0
watts/kilogram (W/kg) averaged over ten grams of body
tissue. The limit incorporates a substantial margin of
safety to give additional protection for the public and to
account for any variations in measurements. The SAR
values may vary, depending on national reporting
requirements and the network band.
80
Precautions when using batteries
•
•
•
•
•
Never use a charger or battery that is
damaged in any way.
Use the battery only for its intended
purpose.
If you use the phone near the network’s
base station, it uses less power. Talk and
standby time are greatly affected by the
signal strength on the cellular network
and the parameters set by the network
operator.
Battery charging time depends on the
remaining battery charge, the type of
battery, and the charger used. The
battery can be charged and discharged
hundreds of times, but it will gradually
wear out. When the operation time is
noticeably shorter than normal, it is time
to buy a new battery.
If left unused, a fully charged battery will
discharge itself over time.
•
•
•
•
Do not short-circuit the battery.
Accidental short-circuiting can occur
when a metallic object like a coin, clip or
pen causes a direct connection between
the + and – terminals of the battery
(metal strips on the battery). For
example, do not carry a spare battery in
a pocket or bag where the battery may
contact metal objects. Short-circuiting
the terminals may damage the battery or
the object causing the short-circuiting.
Dispose of used batteries in accordance
with local regulations. Always recycle. Do
not dispose of batteries in a fire.
Health and safety information
•
Use only Samsung-approved batteries,
and recharge your battery only with
Samsung-approved chargers. Disconnect
the charger from the power source when
it is not in use. Do not leave the battery
connected to a charger for more than a
week, since overcharging may shorten
its life.
Extreme temperatures will affect the
charging capacity of your battery: it may
require cooling or warming first.
Do not leave the battery in hot or cold
places because the capacity and lifetime
of the battery will be reduced. Try to
keep the battery at room temperature. A
phone with a hot or cold battery may not
work temporarily, even when the battery
is fully charged. Li-ion batteries are
particularly affected by temperatures
below 0°C (32°F).
Road safety
Your wireless phone gives you the powerful
ability to communicate by voice, almost
anywhere, anytime. But an important
responsibility accompanies the benefits of
wireless phones, one that every user must
uphold.
When you are driving a car, driving is your
first responsibility. When using your wireless
phone while driving, follow local regulations
in the country or region you are in.
81
Health and safety information
Operating environment
Electronic devices
Remember to follow any special regulations
in force in the area you are in, and always
switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger.
Most modern electronic equipment is
shielded from radio frequency (RF) signals.
However, certain electronic equipment may
not be shielded against the RF signals from
your wireless phone. Consult the
manufacturer to discuss alternatives.
When connecting the phone or any
accessory to another device, read its user’s
guide for detailed safety instructions. Do not
connect incompatible products.
As with other mobile radio transmitting
equipment, users are advised that for the
satisfactory operation of the equipment and
for the safety of personnel, it is
recommended that the equipment should
only be used in the normal operating
position (held to your ear with the antenna
pointing over your shoulder).
Pacemakers
Pacemaker manufacturers recommend that
a minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference
with the pacemaker. These
recommendations are consistent with the
independent research and recommendations
of Wireless Technology Research. If you
have any reason to suspect that interference
is taking place, switch off your phone
immediately.
Hearing aids
Some digital wireless phones may interfere
with some hearing aids. In the event of such
interference, you may wish to consult your
hearing aid manufacturer to discuss
alternatives.
82
Potentially explosive environments
If you use any other personal medical
devices, consult the manufacturer of your
device to determine if it is adequately
shielded from external RF energy.
Switch off your phone when in any area with
a potentially explosive atmosphere, and
obey all signs and instructions. Sparks in
such areas could cause an explosion or fire
resulting in bodily injury or even death.
Your physician may be able to assist you in
obtaining this information.
Switch off your phone in health care facilities
when regulations posted in these areas
instruct you to do so.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in
motor vehicles. Check with the
manufacturer or its representative regarding
your vehicle.
You should also consult the manufacturer of
any equipment that has been added to your
vehicle.
Posted facilities
Switch off your phone in any facility where
posted notices require you to do so.
Health and safety information
Other medical devices
Users are advised to switch off the phone
while at a refuelling point (service station).
Users are reminded of the need to observe
restrictions on the use of radio equipment in
fuel depots (fuel storage and distribution
areas), chemical plants, or where blasting
operations are in progress.
Areas with a potentially explosive
atmosphere are often but not always clearly
marked. They include the areas below decks
on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum
gas, such as propane or butane, areas
where the air contains chemicals or
particles, such as grain, dust or metal
powders, and any other area where you
would normally be advised to turn off your
vehicle engine.
83
Health and safety information
Emergency calls
Other important safety information
This phone, like any wireless phone,
operates using radio signals, wireless, and
landline networks as well as userprogrammed functions, which cannot
guarantee connection in all conditions.
Therefore, you should never rely solely on
any wireless phone for essential
communications like medical emergencies.
•
To make or receive calls, the phone must be
switched on and in a service area with
adequate signal strength. Emergency calls
may not be possible on all wireless phone
networks or when certain network services
and/or phone features are in use. Check
with local service providers.
•
To make an emergency call:
1. Switch on the phone.
2. Key in the emergency number for your
present location. Emergency numbers
vary by location.
3. Press [ ].
84
Certain features like Call Barring may need
to be deactivated before you can make an
emergency call. Consult this document and
your local cellular service provider.
•
•
•
Only qualified personnel should service
the phone or install the phone in a
vehicle. Faulty installation or service may
be dangerous and may invalidate any
warranty applicable to the device.
Check regularly that all wireless phone
equipment in your vehicle is mounted
and operating properly.
Do not store or carry flammable liquids,
gases, or explosive materials in the same
compartment as the phone, its parts, or
accessories.
For vehicles equipped with an air bag,
remember that an air bag inflates with
great force. Do not place objects,
including installed or portable wireless
equipment, in the area over the air bag
or in the air bag deployment area.
Improperly installed wireless equipment
could result in serious injury if the air
bag inflates.
Switch off your phone before boarding an
aircraft. It is dangerous and illegal to use
wireless phones in an aircraft because
they can interfere with the operation of
the aircraft.
•
Failure to observe these instructions may
lead to the suspension or denial of
telephone services to the offender, or
legal action, or both.
Your phone is a product of superior design
and craftsmanship and should be treated
with care. The suggestions below will help
you fulfill any warranty obligations and allow
you to enjoy this product for many years.
• Keep your phone and all its parts and
accessories out of the reach of small
children and pets. They may accidentally
damage these things or choke on small
parts.
• Keep the phone dry. Precipitation,
humidity, and liquids contain minerals
that corrode electronic circuits.
• Do not use the phone with a wet hand.
Doing so may cause an electric shock to
you or damage to the phone.
• Do not use or store the phone in dusty,
dirty areas, as its moving parts may be
damaged.
•
•
•
•
•
Do not store the phone in hot areas.
High temperatures can shorten the life of
electronic devices, damage batteries,
and warp or melt certain plastics.
Do not store the phone in cold areas.
When the phone warms up to its normal
operating temperature, moisture can
form inside the phone, which may
damage the phone’s electronic circuit
boards.
Do not drop, knock, or shake the phone.
Rough handling can break internal circuit
boards.
Do not use harsh chemicals, cleaning
solvents, or strong detergents to clean
the phone. Wipe it with a soft cloth
slightly dampened in a mild soap-andwater solution.
Do not paint the phone. Paint can clog
the device’s moving parts and prevent
proper operation.
Do not put the phone in or on heating
devices, such as a microwave oven,
stove, or radiator. The phone may
explode when overheated.
Health and safety information
Care and maintenance
•
85
Health and safety information
•
•
•
•
86
When the phone or battery gets wet, the
label indicating water damage inside the
phone changes colour. In this case,
phone repairs are no longer guaranteed
by the manufacturer's warranty, even if
the warranty for your phone has not
expired.
If your phone has a flash or light, do not
use it too close to the eyes of people or
animals. This may cause damage to their
eyes.
Use only the supplied or an approved
replacement antenna. Unauthorised
antennas or modified accessories may
damage the phone and violate
regulations governing radio devices.
If the phone, battery, charger, or any
accessory is not working properly, take it
to your nearest qualified service facility.
The personnel there will assist you, and
if necessary, arrange for service.
Index
A
AB mode, text input • 22
Alarm • 40
Answering
call • 25
second call • 26
Anykey answer • 67
Auto redial • 67
B
Background image • 67
Backlight time, set • 67
Barring, calls • 70
Battery
charging • 7
low indicator • 8
precautions • 80
Bluetooth
receiving, data • 74
sending, data • 74
settings • 72
Broadcast messages • 49, 53
Browser, web • 42
C
Calculator • 40
Calendar • 57
Call cost • 30
Call log
dialled • 29
missed • 29
received • 29
Call time • 29
Caller groups • 32
Caller ID • 68, 71
Calls
answering • 25
barring • 70
diverting • 69
holding • 26
making • 24
redialling • 25
rejecting • 25
transferring • 27
waiting • 70
Camera
photos • 61
videos • 63
CB (Cell Broadcast) messages •
49, 53
Characters, enter • 22
Configuration messages • 47
Connection tone • 69
Converter • 41
Creating messages
MMS • 45
CUG (Closed User Group) • 71
D
Date, set • 66
Deleting
call log • 29
items • 59, 60
MMS • 48, 50, 51
phonebook • 31, 34
SMS • 48, 50, 51
Dialled calls • 29
Dialling display, set • 68
Display
brightness • 67
icons • 10
language • 66
layout • 10
settings • 67
Diverting, calls • 69
DRM (Digital Rights Management)
• 54
DTMF tones, send • 27
E
Emergency calls • 84
F
FDN (Fixed Dialling Number)
mode • 75
File manager • 54
FM radio • 36
87
Index
G
Games • 38
Greeting message • 66
H
Health and safety • 79
Holding, call • 26
I
Icons, description • 10
Images, downloaded • 54
Inbox, messages • 47
International calls • 24
Internet • 42
J
Java applications • 34
K
Key tones
selecting • 68
sending/muting • 27
volume • 68
Keypad lock • 8, 66
L
Language, select • 66
Last number, redial • 25
Locking
keypad • 8
menu functions • 75
phone • 75
SIM card • 75
Low battery indicator • 8
88
M
Memory status
downloaded items • 57
file manager • 57
messages • 54
phonebook 34
Message tone • 68
Messages
cell broadcast • 49, 53
configuration • 48
greeting • 66
MMS • 45, 48
push • 49, 53
SMS • 44, 48
Minute minder • 69
Missed calls • 29
MMS messages
creating/sending • 45
deleting • 48
setting • 52
viewing • 47
MP3 player • 36
Multiparty-call • 28
Music player • 34
Music, downloaded • 56
N
Name card • 33
Names
entering • 22
searching • 30
Network selection • 71
Network services • 69
O
Outbox, messages • 49
P
Password
call barring • 70
phone • 75
Phone
care and maintenance • 85
display • 10
icons • 10
locking • 75
password • 75
resetting • 77
switching on/off • 8
unpacking • 6
Phonebook
adding • 31
deleting • 31, 34
managing • 33
options • 31
searching • 30
speed dialling • 32
Photos
taking • 61
viewing • 54
PIN, change • 74
PIN2, change • 75
Power on/off tone • 68
Privacy • 75
Problems, solve • 77
Push messages • 49, 53
R
S
Safety
information • 79
precaution • 3
Security, calls • 74
Sent messages • 50
Shortcut • 66
Silent mode
entering • 13
setting • 69
SIM card
inserting • 7
locking • 75
W
Waiting call • 70
Wallpaper • 67
Web browser
access • 42
bookmarks • 43
World time • 39
Index
Radio • 36
Received calls • 29
Received messages • 47
Recording
videos • 63
voice memos • 37
Redialling
automatically • 67
manually • 25
Resetting phone • 77
Ringer
incoming calls • 68
messages • 68
Road safety • 81
Roaming • 71
Skin colour • 67
SMS messages
creating/sending • 44, 45
deleting • 48
setting • 51
viewing • 47
Sound settings • 68
Sounds, downloaded • 56
Speakerphone • 27
Speed dial • 32
Stopwatch • 42
Switching on/off
microphone • 27
phone • 8
T
T9 mode, text input • 23
Templates, message • 50
Text, enter • 22
Time, set • 65
Timer • 41
V
Videos
playing • 55
recording • 63
Voice recorder
playing • 38
recording • 37
Voicemail server • 71
89
Declaration of Conformity (R&TTE)
For the following product:
GSM900/GSM1800/GSM1900 with Bluetooth
Portable Cellular Telephone
(Product description)
SGH-X630
(Model name)
Manufactured at:
Samsung Electronics Co., Ltd, 94-1 Imsoo-Dong, Gumi City,
Kyung Buk, Korea, 730-350
(factory name, address*)
to which this declaration relates, is in conformity with the following standards and/or
other normative documents.
: EN 60950-1:2001
: EN 301 489-01 v.1.4.1 (08-2002)
: EN 301 489-07 v.1.2.1 (08-2002)
: EN 301 489-17 v.1.2.1 (08-2002)
SAR
: EN 50360:2001
: EN 50361:2001
Network : EN 301 511 v9.0.2 (03-2003)
Safety
EMC
EN 300 328 v1.6.1 (11-2004)
We hereby declare the [all essential radio test suites have been carried out and that]
the above named product is in conformity to all the essential requirements of
Directive 1999/5/EC.
The conformity assessment procedure referred to in Article 10 and detailed in
Annex[IV] of Directive 1999/5/EC has been followed with the involvement of the
following Notified Body(ies):
BABT, Balfour House, Churchfield Road,
Walton-on-Thames, Surrey, KT12 2TD, UK
Identification mark: 0168
The technical documentation kept at:
Samsung Electronics QA Lab.
which will be made available upon request.
(Representative in the EU)
Samsung Electronics Euro QA Lab
Blackbushe Business Park, Saxony Way,
Yateley, Hampshire, GU46 6GG, UK
2006. 05. 12
Yong-Sang Park/S. Manager
(place and date of issue)
(name and signature of authorised person)
* It is not the address of Samsung Service Centre. For the address or the phone number of Samsung Service
Centre, see the warranty card or contact the retailer where you purchased your phone.
* Depending on the software installed or your service provider or country,
some of the descriptions in this guide may not match your phone exactly.
* Depending on your country, your phone and accessories may appear
different from the illustrations in this guide.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-09948A
English (EU). 06/2006. Rev. 1.0