Yamaha | htr-5890 | Owner`s manual | Yamaha htr-5890 Owner`s manual

5890U_Hyo1-4.fm Page 1 Thursday, December 23, 2004 12:51 PM
U
PHILCO
PHILIPS
0062
0062, 0108, 0645,
1108, 1208
PHONOLA
0108
PILOT
0064
PIONEER
0069, 0094, 0108
POLK AUDIO 0108
PROFITRONIC
0267
PROLINE
0027
PROSCAN
0087, 1087
PROTEC
0099
PULSAR
0066
PYE
0108
QUASAR
0062, 1062
QUELLE
0108
RCA
0062, 0069, 0087,
0267, 0834, 1062,
1087
RADIOSHACK
0027
RADIOLA
0108
RADIX
0064
RANDEX
0064
REALISTIC
0027, 0062, 0064,
0074, 0075, 0131
REOC
0375
REPLAYTV
0641, 0643
REX
0068
ROADSTAR 0064, 0099, 0267,
0305
RUNCO
0066
SBR
0108
SEG
0267
SEI
0108
STS
0069
SABA
0068, 0347
SALORA
0070
SAMPO
0064, 0075
SAMSUNG
0072, 0267, 0459
SANKY
0066, 0075
SANSUI
0027, 0068, 0094,
1506
SANYO
0074, 0131, 0267
SAVILLE
0379
SCHAUB LORENZ 0027, 0068,
0131
SCHNEIDER 0027, 0099, 0108
SCOTT
0070, 0072, 0211
SEARS
0027, 0062, 0064,
0069, 0074, 0131,
1264
SELECO
0068
SEMP
0072
SHARP
0075, 0834
SHINTOM
0099, 0131
SIEMENS
0064, 0108, 0131
SILVA
0064
SINGER
0072, 0099
SINUDYNE
0108
SONIC BLUE 0641, 0643
SONTEC
0064
SONY
0027, 0059, 0060,
0062, 0663, 1259
SUNKAI
0375
SUNSTAR
0027
SUNTRONIC 0027
SYLVANIA
0027, 0062, 0108,
0070, 1808
SYMPHONIC 0027
TMK
0267
TANDY
0027, 0131
TASHIKO
0027, 0064
TATUNG
0027, 0068, 0072,
0094, 0108
TEAC
0027, 0068, 0305,
0334, 0669
TECHNICS
0062, 0253
TECO
0062, 0064, 0068,
0075
TEKNIKA
0027, 0062, 0064
TELEAVIA
0068
TELEFUNKEN
0068, 0347
TENOSAL
0099
TENSAI
0027
THOMAS
0027
THOMSON
0068, 0087, 0094,
0347
THORN
0068, 0131
TIVO
0645, 0663
TOSHIBA
0068, 0070, 0072,
0094, 0108, 0872
TOTEVISION 0064, 0267
UHER
0267
UNITECH
0267
UNIVERSUM 0027, 0064, 0108,
0267
VECTOR
0072
VICTOR
0068, 0094
VIDEO CONCEPTS 0072
VIDEOMAGIC
0064
VIDEOSONIC 0267
VILLAIN
0027
WARDS
0027, 0062, 0069,
0074, 0075, 0087,
0099, 0108, 0267
WHITE WESTINGHOUSE
0099
XR-1000
0027, 0062, 0099
YAMAHA
0068
YAMISHI
0099
YOKAN
0099
YOKO
0267
ZENITH
0027, 0060, 0066,
1506
HTR-5890
AV Receiver
© 2005
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
All rights reserved.
OWNER'S MANUAL
Printed in Malaysia
WE64820
01EN00_HTR5890U.book Page i Thursday, December 23, 2004 12:39 PM
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
10
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
•
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert you to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle
is intended to alert you to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
1
2
3
4
5
6
7
8
9
i
11
Read Instructions – All the safety and operating instructions
should be read before the product is operated.
Retain Instructions – The safety and operating instructions
should be retained for future reference.
Heed Warnings – All warnings on the product and in the
operating instructions should be adhered to.
Follow Instructions – All operating and use instructions
should be followed.
Cleaning – Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a clean, dry cloth for cleaning.
Attachments – Do not use attachments not recommended by
the product manufacturer as they may cause hazards.
Water and Moisture – Do not use this product near water –
for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool;
and the like.
Accessories – Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may fall,
causing serious injury to a child or adult, and serious
damage to the product. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or sold
with the product. Any mounting of the product should
follow the manufacturer’s instructions, and should use a
mounting accessory recommended by the manufacturer.
A product and cart combination should be moved with care.
Quick stops, excessive force, and uneven
surfaces may cause the product and cart
combination to overturn.
12
13
14
15
16
17
18
19
Ventilation – Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the
product and to protect it from overheating, and these
openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed,
sofa, rug, or other similar surface. This product should not
be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer’s
instructions have been adhered to.
Power Sources – This product should be operated only from
the type of power source indicated on the marking label. If
you are not sure of the type of power supply to your home,
consult your product dealer or local power company. For
products intended to operate from battery power, or other
sources, refer to the operating instructions.
Grounding or Polarization – This product may be equipped
with a polarized alternating current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
Power-Cord Protection – Power-supply cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and the
point where they exit from the product.
Lightning – For added protection for this product during a
lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line
surges.
Power Lines – An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be
fatal.
Overloading – Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can result
in a risk of fire or electric shock.
Object and Liquid Entry – Never push objects of any kind
into this product through openings as they may touch
dangerous voltage points or short-out parts that could result
in a fire or electric shock. Never spill liquid of any kind on
the product.
Servicing – Do not attempt to service this product yourself
as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
Damage Requiring Service – Unplug this product from the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the
product,
c) If the product has been exposed to rain or water,
01EN00_HTR5890U.book Page ii Thursday, December 23, 2004 12:39 PM
IMPORTANT SAFETY INSTRUCTIONS
d)
20
21
22
23
If the product does not operate normally by following
the operating instructions. Adjust only those controls
that are covered by the operating instructions as an
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to its normal
operation,
e) If the product has been dropped or damaged in any
way, and
f)
When the product exhibits a distinct change in performance - this indicates a need for service.
Replacement Parts – When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other
hazards.
Safety Check – Upon completion of any service or repairs to
this product, ask the service technician to perform safety
checks to determine that the product is in proper operating
condition.
Wall or Ceiling Mounting – The unit should be mounted
to a wall or ceiling only as recommended by the
manufacturer.
Heat – The product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
24
Outdoor Antenna Grounding – If an outside antenna or
cable system is connected to the product, be sure the antenna
or cable system is grounded so as to provide some
protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA 70,
provides information with regard to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING
MAST
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810–20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810–21)
GROUND CLAMPS
Note to CATV system installer:
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building, as
close to the point of cable entry as practical.
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)
NEC – NATIONAL ELECTRICAL CODE
FCC INFORMATION (for US customers)
1 IMPORTANT NOTICE: DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved by
Yamaha may void your authority, granted by the FCC, to
use the product.
2 IMPORTANT: When connecting this product to
accessories and/or another product use only high quality
shielded cables. Cable/s supplied with this product MUST
be used. Follow all installation instructions. Failure to
follow instructions could void your FCC authorization to
use this product in the USA.
3 NOTE: This product has been tested and found to comply
with the requirements listed in FCC Regulations, Part 15
for Class “B” digital devices. Compliance with these
requirements provides a reasonable level of assurance that
your use of this product in a residential environment will
not result in harmful interference with other electronic
devices.
This equipment generates/uses radio frequencies and, if
not installed and used according to the instructions found
in the users manual, may cause interference harmful to the
operation of other electronic devices.
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this
product is found to be the source of interference, which
can be determined by turning the unit “OFF” and “ON”,
please try to eliminate the problem by using one of the
following measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient
the antenna. If the antenna lead-in is 300 ohm ribbon lead,
change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to
distribute this type of product. If you can not locate the
appropriate retailer, please contact Yamaha Electronics
Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA
90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
ii
01EN00_HTR5890U.book Page iii Thursday, December 23, 2004 12:39 PM
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1 To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2 Install this sound system in a well ventilated, cool, dry, clean
place — away from direct sunlight, heat sources, vibration,
dust, moisture, and/or cold. Allow ventilation space of at least
30 cm on the top, 20 cm on the left and right, and 20 cm on
the back of this unit.
3 Locate this unit away from other electrical appliances, motors,
or transformers to avoid humming sounds.
4 Do not expose this unit to sudden temperature changes from
cold to hot, and do not locate this unit in an environment with
high humidity (i.e. a room with a humidifier) to prevent
condensation inside this unit, which may cause an electrical
shock, fire, damage to this unit, and/or personal injury.
5 Avoid installing this unit where foreign object may fall onto
this unit and/or this unit may be exposed to liquid dripping or
splashing. On the top of this unit, do not place:
– Other components, as they may cause damage and/or
discoloration on the surface of this unit.
– Burning objects (i.e. candles), as they may cause fire,
damage to this unit, and/or personal injury.
– Containers with liquid in them, as they may fall and liquid
may cause electrical shock to the user and/or damage to
this unit.
6 Do not cover this unit with a newspaper, tablecloth, curtain,
etc. in order not to obstruct heat radiation. If the temperature
inside this unit rises, it may cause fire, damage to this unit,
and/or personal injury.
7 Do not plug in this unit to a wall outlet until all connections
are complete.
8 Do not operate this unit upside-down. It may overheat,
possibly causing damage.
9 Do not use force on switches, knobs and/or cords.
10 When disconnecting the power cord from the wall outlet,
grasp the plug; do not pull the cord.
11 Do not clean this unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
12 Only voltage specified on this unit must be used. Using this
unit with a higher voltage than specified is dangerous and may
cause fire, damage to this unit, and/or personal injury.
YAMAHA will not be held responsible for any damage
resulting from use of this unit with a voltage other than
specified.
13 To prevent damage by lightning, disconnect the power cord
from the wall outlet during an electrical storm.
14 Do not attempt to modify or fix this unit. Contact qualified
YAMAHA service personnel when any service is needed. The
cabinet should never be opened for any reasons.
15 When not planning to use this unit for long periods of time
(i.e. vacation), disconnect the AC power plug from the wall
outlet.
16 Be sure to read the “TROUBLESHOOTING” section on
common operating errors before concluding that this unit is
faulty.
17 Before moving this unit, press STANDBY/ON to set this unit
in the standby mode, and disconnect the AC power plug from
the wall outlet.
iii
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE.
This unit is not disconnected from the AC power
source as long as it is connected to the wall outlet,
even if this unit itself is turned off. This state is called
the standby mode. In this state, this unit is designed to
consume a very small quantity of power.
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to
wide slot and fully insert.
This Class B digital apparatus complies with Canadian
ICES-003.
IMPORTANT
Please record the serial number of this unit in the space
below.
MODEL:
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future
reference.
01EN00_HTR5890U.book Page 1 Thursday, December 23, 2004 12:39 PM
CONTENTS
FEATURES............................................................. 2
GETTING STARTED............................................ 3
Supplied accessories .................................................. 3
Installing batteries in the remote control ................... 3
INTRODUCTION
INTRODUCTION
SOUND FIELD PROGRAMS
SOUND FIELD PROGRAM
DESCRIPTIONS...............................................46
For movie/video sources.......................................... 46
For music sources .................................................... 49
CONTROLS AND FUNCTIONS ......................... 4
PREPARATION
SPEAKER SETUP ............................................... 12
Speaker placement ................................................... 12
Speaker connections ................................................ 13
Before connecting components................................ 17
Connecting video components................................. 18
Connecting audio components................................. 21
Connecting the antennas .......................................... 23
Connecting the power supply cord .......................... 24
Speaker impedance setting ...................................... 25
Turning on the power............................................... 25
AUTO SETUP....................................................... 26
BASIC SETUP ...................................................... 31
Using BASIC MENU .............................................. 31
Selecting the OSD mode.......................................... 50
Using the sleep timer ............................................... 50
Manually adjusting speaker levels........................... 51
Using the test tone ................................................... 52
SET MENU ............................................................53
Using SET MENU................................................... 54
Using SOUND MENU ............................................ 55
Using INPUT MENU .............................................. 60
Using OPTION MENU ........................................... 62
REMOTE CONTROL FEATURES ...................65
Control area ............................................................. 65
Setting remote control codes ................................... 66
Programming codes from other remote controls
(Learn) ................................................................. 68
Changing source names in the display window....... 70
Using the Macro feature .......................................... 71
Clearing function sets .............................................. 73
Clearing individual functions .................................. 74
Controlling each component.................................... 76
SOUND FIELD
PROGRAMS
Introduction.............................................................. 26
Optimizer microphone setup.................................... 26
Starting the setup ..................................................... 27
ADVANCED OPERATIONS ..............................50
BASIC
OPERATION
CONNECTIONS .................................................. 17
ADVANCED OPERATION
PREPARATION
Front panel ................................................................. 4
Remote control........................................................... 6
Using the remote control ........................................... 8
Front panel display .................................................... 9
Rear panel ................................................................ 11
ZONE 2/ZONE 3 ...................................................77
Zone 2/Zone 3 connections...................................... 77
Remote controlling Zone 2/Zone 3.......................... 78
PLAYBACK.......................................................... 33
ADDITIONAL INFORMATION
BASIC OPERATION
TUNING ................................................................ 41
Automatic and manual tuning.................................. 41
Presetting stations .................................................... 42
Selecting preset stations........................................... 44
Exchanging preset stations ...................................... 44
What is a sound field? ............................................. 80
Changing parameter settings ................................... 80
SOUND FIELD PARAMETER
DESCRIPTIONS...............................................82
TROUBLESHOOTING .......................................86
GLOSSARY...........................................................91
Audio formats .......................................................... 91
Sound field programs............................................... 92
Audio information ................................................... 93
Video signal information ......................................... 94
ADDITIONAL
INFORMATION
RECORDING ....................................................... 45
EDITING SOUND FIELD PARAMETERS ......80
ADVANCED
OPERATION
Basic operations....................................................... 33
Selecting sound field programs ............................... 34
Additional operations............................................... 35
Selecting input modes.............................................. 40
SPECIFICATIONS...............................................95
English
1
01EN00_HTR5890U.book Page 2 Thursday, December 23, 2004 12:39 PM
FEATURES
FEATURES
Built-in 7-channel power amplifier
Other features
◆ Minimum RMS output power
(0.04% THD, 20 Hz – 20 kHz, 8 Ω)
Front: 120 W + 120 W
Center: 120 W
Surround: 120 W + 120 W
Surround Back: 120 W + 120 W
◆ YPAO: YAMAHA Parametric Room Acoustic
Optimizer for automatic speaker setup
◆ 192-kHz/24-bit D/A converter
◆ SET MENU to optimize this unit for your audio/video
system
◆ 6 or 8-channel additional input jacks for discrete multi
channel input
◆ On-screen display function helpful in controlling this
unit
◆ PURE DIRECT for pure fidelity sound with analog and
PCM sources
◆ S-video signal input/output capability
◆ Component video input/output capability
◆ Video signal conversion (composite video ↔
S-video → component video) capability for monitor
out
◆ Optical and coaxial digital audio signal jacks
◆ Sleep timer
◆ Cinema and music night listening mode
◆ Remote control with preset remote control codes and
learning/macro capability
◆ Zone 2/Zone 3 custom installation facility
Sound field features
◆ Proprietary YAMAHA technology for the creation of
sound fields
◆ THX Select
◆ Dolby Digital/Dolby Digital EX decoder
◆ DTS/DTS-ES Matrix 6.1, Discrete 6.1, DTS
Neo:6 decoder, DTS 96/24
◆ Dolby Pro Logic/Dolby Pro Logic II/Dolby Pro Logic
IIx Decoder
◆ Virtual CINEMA DSP
◆ SILENT CINEMA™
Sophisticated AM/FM tuner
◆ 40-station random access preset tuning
◆ Automatic preset tuning
◆ Preset station shifting capability (preset editing)
• y indicates a tip for your operation.
• Some operations can be performed by using either the buttons on the main unit or on the remote control. In cases when the button
names differ between the main unit and the remote control, the button name on the remote control is given in parentheses.
• This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In
case of differences between the manual and product, the product has priority.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, “Surround EX”, and the double-D symbol
are trademarks of Dolby Laboratories.
“DTS”, “DTS-ES”, “Neo:6” and “DTS 96/24” are trademarks of
Digital Theater Systems, Inc.
“SILENT CINEMA” is a trademark of YAMAHA
CORPORATION.
THX and the THX logo are registered trademarks of THX Ltd.
Surround EX is a jointly developed technology of THX and
Dolby Laboratories, Inc. and is a trademark of Dolby
Laboratories, Inc. All rights reserved. Used under authorization.
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or
distortion – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is
often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group
recommend you to avoid prolonged exposure from excessive volume levels.
2
01EN00_HTR5890U.book Page 3 Thursday, December 23, 2004 12:39 PM
GETTING STARTED
GETTING STARTED
INTRODUCTION
Supplied accessories
Please check that you received all of the following parts.
Batteries (4)
(AAA, R03, UM-4)
Power Cord
Indoor FM antenna
Speaker terminal wrench
Optimizer microphone
AM loop antenna
Remote control
SYSTEM
POWER
POWER
TV
AV
STANDBY
POWER
A
B
INPUT MODE
SLEEP
PHONO
TUNER
CD
MULTI CH IN
V-AUX
CBL/SAT
MD/TAPE
CD-R
DTV
VCR 1
DVR/VCR2
DVD
SELECT
AMP
+
+
+
TV VOL
CH
VOL
–
–
SOURCE
–
TV
A/B/C/D/E
TV MUTE
TV INPUT
MUTE
LEVEL
SET MENU
TITLE
MENU
PURE DIRECT
NIGHT
AUDIO
ENTER
TEST
ON SCREEN
RETURN
DISPLAY
STRAIGHT
EFFECT
STEREO
HALL
JAZZ
ROCK
1
2
3
4
ENTERTAIN
MUSIC
TV THTR
MOVIE
5
6
7
8
THX
STANDARD
9
0
FREQ/RDS
EON
EXTD. SUR
+10
ENT.
MODE PTY SEEK START
REC
DISC SKIP
OFF
ON
MACRO
LEARN
CLEAR
RE–NAME
Installing batteries in the remote
control
2
1
3
1
Press the
part and slide the battery
compartment cover off.
2
Insert the four supplied batteries (AAA, R03,
UM-4) according to the polarity markings on
the inside of the battery compartment.
3
Slide the cover back until it snaps into place.
Notes on batteries
• Change all of the batteries if you notice conditions such as the
operation range of the remote control decreases, the indicator
does not flash, or its light or display window become dim.
• Do not use old batteries together with new ones.
• Do not use different types of batteries (such as alkaline and
manganese batteries) together. Read the packaging carefully as
these different types of batteries may have the same shape and
color.
• If the batteries have leaked, dispose of them immediately. Avoid
touching the leaked material or letting it come into contact with
clothing, etc. Clean the battery compartment thoroughly before
installing new batteries.
• Do not throw away batteries with general house waste; dispose
of them correctly in accordance with your local regulations.
If the remote control is without batteries for more than
2 minutes, or if exhausted batteries remain in the
remote control, the contents of the memory may be
cleared. When the memory is cleared, insert new
batteries, set up the remote control code and program
any acquired functions that may have been cleared.
3
01EN00_HTR5890U.book Page 4 Thursday, December 23, 2004 12:39 PM
CONTROLS AND FUNCTIONS
CONTROLS AND FUNCTIONS
Front panel
1
2
3 45
6
7
8
9
0
A
VOLUME
PURE DIRECT
STANDBY
/ON
PRESET/TUNING
OPTIMIZER
MIC
FM/AM
A/B/C/D/E
PRESET/TUNING
EDIT
PROGRAM
PHONES
MEMORY
TUNING MODE
MAN'L/AUTO FM
AUTO/MAN'L MONO
INPUT
SPEAKERS
A
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
EFFECT
S VIDEO
SILENT CINEMA
B
C
D
E
F
G
1 STANDBY/ON
Turns on this unit or sets it to the standby mode. When
you turn on this unit, you will hear a click and there will
be a 6 to 7-second delay before this unit can reproduce
sound.
Note
In standby mode, this unit consumes a small amount of power in
order to receive infrared-signals from the remote control.
2 PURE DIRECT
Turns on or off the PURE DIRECT mode. Lights up when
turned on (see page 37).
3 Remote control sensor
Receives signals from the remote control.
4 Front panel display
Shows information about the operational status of this
unit.
5 PRESET/TUNING EDIT
Switches the function of PRESET/TUNING l / h
between selecting preset station numbers and tuning.
6 FM/AM
Switches the reception band between FM and AM.
4
H
I
J
VIDEO
L
AUDIO
R
OPTICAL
K
7 A/B/C/D/E
Selects one of the 5 preset station groups (A to E).
8 PRESET/TUNING l / h
Selects preset station number 1 through 8 when a colon (:)
is displayed next to the band indication in the front panel
display.
Selects the tuning frequency when the colon (:) is not
displayed.
9 MEMORY (MAN’L/AUTO FM)
Stores a station in the memory. Hold down this button for
more than 3 seconds to start automatic preset tuning.
0 TUNING MODE (AUTO/MAN’L MONO)
Switches the tuning mode between automatic (AUTO
indicator on) and manual (AUTO indicator off).
A VOLUME
Controls the output level of all audio channels.
This does not affect the REC OUT level.
B OPTIMIZER MIC jack
Use to connect and input audio signals from the supplied
microphone for use with the AUTO SETUP function (see
page 26).
01EN00_HTR5890U.book Page 5 Thursday, December 23, 2004 12:39 PM
CONTROLS AND FUNCTIONS
INTRODUCTION
C
PHONES (SILENT CINEMA) jack
Outputs audio signals for listening with headphones.
When you connect headphones, no signals are output to
the PRE OUT jacks or to the speakers.
All Dolby Digital and DTS audio signals are mixed down
to the left and right headphone channels.
D SPEAKERS A/B
Turn on or off the set of front speakers connected to the A
and/or B terminals on the rear panel each time the
corresponding button is pressed.
E STRAIGHT/EFFECT
Switches the sound fields off or on. When STRAIGHT is
selected, input signals (2-channel or multi-channel) are
output directly from their respective speakers without
effect processing.
F PROGRAM
Use to select sound field programs or adjust bass/treble
balance (in conjunction with TONE CONTROL).
G TONE CONTROL
Use to adjust the bass/treble balance for the front left/right
and center channels (see page 35).
H INPUT MODE
Sets the priority (AUTO, DTS, ANALOG) for the type of
signals received when one component is connected to two
or more of this unit’s input jacks (see page 40).
I INPUT selector
Selects the input source you want to listen to or watch.
J MULTI CH INPUT
Selects the source connected to the MULTI CH INPUT
jacks. When selected, the MULTI CH INPUT source takes
priority over the source selected with INPUT (or the input
selector buttons on the remote control).
K VIDEO AUX jacks
Input audio and video signals from an external source
such as a game console. To reproduce source signals from
these jacks, select V-AUX as the input source.
English
5
01EN00_HTR5890U.book Page 6 Thursday, December 23, 2004 12:39 PM
CONTROLS AND FUNCTIONS
Remote control
This section describes the function of each control on the
remote control used to control this unit. To operate other
components, see “REMOTE CONTROL FEATURES” on
page 65.
1
2
C
SYSTEM
POWER
POWER
TV
AV
STANDBY
POWER
A
B
INPUT MODE
SLEEP
PHONO
TUNER
CD
MULTI CH IN
D
E
F
G
3
V-AUX
DTV
CBL/SAT
MD/TAPE
VCR 1
DVR/VCR2
PRESET
AMP
+
+
SOURCE
TV VOL
CH
VOL
–
–
–
6
7
TV INPUT
I
SET MENU
TITLE
MENU
NIGHT
AUDIO
TEST
ON SCREEN
DISPLAY
STRAIGHT
K
0 Sound field program/Numeric buttons
Use to select sound field programs or input numbers.
Use numbers 1 through 8 to select preset stations when
this unit is in tuner mode.
L
M
N
O
P
EFFECT
0
STEREO
HALL
JAZZ
ROCK
1
2
3
4
ENTERTAIN
MUSIC
TV THTR
MOVIE
5
6
7
8
THX
STANDARD
9
0
FREQ/RDS
EON
B
ON
MACRO
ENT.
Q
MODE PTY SEEK START
LEARN
CLEAR
RE–NAME
R
S
t
1 Infrared window
Outputs infrared control signals. Aim this window at the
component you want to operate.
2 Transmission indicator
Flashes while the remote control is sending signals.
6
B MACRO
Use to program a series of operations for control by a
single button (see page 71).
EXTD. SUR
+10
DISC SKIP
OFF
A MACRO ON/OFF
Turns the macro function on and off.
C STANDBY
Sets this unit in the standby mode.
REC
A
8 Cursor buttons k / n / l / h / ENTER
Use to select and adjust DSP program parameters or SET
MENU items.
9 TEST
Outputs the test tone to adjust the speaker levels.
PURE DIRECT
ENTER
RETURN
6 A/B/C/D/E
Selects preset groups when this unit is in tuner mode.
J
TV
MUTE
LEVEL
8
9
H
A/B/C/D/E
TV MUTE
5 PRESET +/–
Selects preset station numbers when this unit is in tuner
mode.
7 LEVEL
Selects the speaker channel to be adjusted and sets the
level.
DVD
SELECT
+
4 Display window
Shows the name of the selected source component that
you can control.
CD-R
4
5
3 Input selector buttons
Select the input source and change the control area.
D SYSTEM POWER
Turns on the power of this unit.
E INPUT MODE
Sets the priority (AUTO, DTS, ANALOG) for the type of
signals received when one component is connected to two
or more of this unit’s input jacks (see page 40).
F SLEEP
Sets the sleep timer.
G MULTI CH IN
Selects MULTI CH INPUT when using an external
decoder (etc.).
01EN00_HTR5890U.book Page 7 Thursday, December 23, 2004 12:39 PM
CONTROLS AND FUNCTIONS
INTRODUCTION
H SELECT k/n
Selects another component that you can control
independently of the input component selected with the
input selector buttons.
I VOL +/–
Increases or decreases the volume level.
J AMP/SOURCE/TV
Selects the component you want to control with the
remote control.
AMP: Set to this position to operate this unit.
SOURCE: Set to this position to operate the component
selected with an input selector button.
TV: Set to this position to operate the television.
To set the remote control codes for components, see
page 66.
K MUTE
Mutes the sound. Press again to restore the audio output to
the previous volume level. You can adjust how much the
mute function reduces the output volume in the MUTE
menu of the SET MENU mode (see page 59).
L PURE DIRECT
Turns on or off PURE DIRECT mode (see page 37).
M SET MENU
Selects the SET MENU mode.
N NIGHT
Turns on or off the night listening modes (see page 38).
O ON SCREEN
Selects the display mode of the on-screen display (OSD)
this unit sends to your monitor.
P STRAIGHT/EFFECT
Switches the sound fields off or on. When STRAIGHT is
selected, input signals (2-channel or multi-channel) are
output directly from their respective speakers without
effect processing.
Q EXTD. SUR
Switches between 5.1 or 6.1/7.1 channel playback of
multi-channel software.
R RE-NAME
Used to change the input source name in the display
window (see page 70).
S CLEAR
Used to clear functions acquired when using the learn and
rename features, or setting remote control codes (see
page 73).
English
T LEARN
Used to set up the remote control code or program
functions from other remote controls (see pages 66 and
68).
7
01EN00_HTR5890U.book Page 8 Thursday, December 23, 2004 12:39 PM
CONTROLS AND FUNCTIONS
Using the remote control
The remote control transmits a directional infrared beam.
Be sure to aim the remote control directly at the remote
control sensor on the main unit during operation.
VOLUME
PURE DIRECT
STANDBY
/ON
PRESET/TUNING
OPTIMIZER
MIC
FM/AM
A/B/C/D/E
PRESET/TUNING
EDIT
PROGRAM
PHONES
MEMORY
TUNING MODE
MAN'L/AUTO FM
AUTO/MAN'L MONO
INPUT
SPEAKERS
A
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
EFFECT
S VIDEO
SILENT CINEMA
30
30
L
AUDIO
R
OPTICAL
Approximately 6 m (20 ft)
RE–NAME CLEAR LEARN
TRANSMIT
SYSTEM
POWER
VIDEO
STANDBY
SLEEP
INPUT MODE
CD
MULTI CH IN
PHONO
TUNER
V-AUX
CBL/SAT
MD/TAPE
DTV
VCR 1
DVR/VCR2
CD-R
DVD
SELECT
POWER
POWER
AMP
AV
TV
REC
AUDIO
DISC SKIP
VOL
LEVEL
SET MENU
TITLE
MUTE
MENU
TV VOL
TV INPUT
CH
A/B/C/D/E
TV MUTE
SELECT
PRESET
CH
PRESET
TEST
ON SCREEN
STRAIGHT
TV VOL
RETURN
DISPLAY
EFFECT
STEREO
HALL
JAZZ
1
2
3
ENTERTAIN
MUSIC
TV THTR
5
THX
9
6
/DTS
0
7
NIGHT
+10
ROCK
4
MOVIE
8
EX/ES
ENTER
CHP/INDEX
■ Handling the remote control
• Do not spill water or other liquids on the remote
control.
• Do not drop the remote control.
• Do not leave or store the remote control in the
following types of conditions:
– high humidity such as near a bath
– high temperature such as near a heater or stove
– extremely low temperature
– dusty places
8
01EN00_HTR5890U.book Page 9 Thursday, December 23, 2004 12:39 PM
CONTROLS AND FUNCTIONS
Front panel display
2
V–AUX
THX
PCM
96 MATRIX
24 DISCRETE
DIGITAL
PL
PL
EX
PL x
0 A
DVR/VCR2
3
VCR 1
NIGHT
VIRTUAL
4
CBL/SAT
SP
AB
5
DTV
6
DVD
MD/TAPE
YPAO
HiFi DSP
SILENT
CINEMA
7 8
CD–R
CD
TUNER
ft
mS
dB
C
P
D E F
G
H
PHONO
EON AUTO STEREO
MEMORY TUNED
ZONE2
ZONE3
ZONE4
SLEEP
B
9
I J
dB
MUTE VOLUME
96/24
L C R
LFE SL SB SR
K L
M NO
1 Decoder indicators
When any of this unit’s decoders function, the respective
indicator lights up.
A PCM indicator
Lights up when this unit is reproducing PCM (pulse code
modulation) digital audio signals.
2 Sound field indicators
Light to indicate the active DSP sound fields.
B SLEEP indicator
Lights up while the sleep timer is on.
Presence DSP sound field
Listening position
Left surround
DSP sound field
Right surround
DSP sound field
Surround back DSP sound field
3 NIGHT indicator
Lights up when you select night listening mode.
C VIRTUAL indicator
Lights up when Virtual CINEMA DSP is active (see
page 39).
D Headphones indicator
Lights up when headphones are connected.
4 Input source indicators
A cursor lights to show the current input source.
E SP A B indicators
Light up according to the set of front speakers selected.
Both indicators light up when both sets of speakers are
selected, or when bi-wiring.
5 CINEMA DSP indicator
Lights up when you select a CINEMA DSP sound field
program.
F SILENT CINEMA indicator
Lights up when headphones are connected and a sound
field program is selected (see page 35).
6 YPAO indicator
Lights up during the auto setup procedure and when the
auto setup speaker settings are used without any
modifications.
G Multi-information display
Shows the current sound field program name and other
information when adjusting or changing settings.
7 AUTO indicator
Lights up when this unit is in the automatic tuning mode.
8 STEREO indicator
Lights up when this unit is receiving a stereo signal for an
FM stereo broadcast while the AUTO indicator is lit.
0 THX indicator
Lights up when a THX program is selected.
H HiFi DSP indicator
Lights up when you select a HiFi DSP sound field
program.
I MEMORY indicator
Blinks to show a station can be stored.
J TUNED indicator
Lights up when this unit is tuned into a station.
K MUTE indicator
Blinks while the MUTE function is on.
English
9 VOLUME level indicator
Indicates the volume level.
INTRODUCTION
1
9
01EN00_HTR5890U.book Page 10 Thursday, December 23, 2004 12:39 PM
CONTROLS AND FUNCTIONS
L 96/24 indicator
Lights up when a DTS 96/24 signal is input to this unit.
M LFE indicator
Lights up when the input signal contains an LFE signal.
N Input channel indicators
Indicate the channel components of current digital input
signal.
O Presence and surround back speaker
indicators
Indicate the connection of presence and/or surround back
speakers when using the SPEAKERS setting (page 32) or
SP LEVEL setting (page 57).
P ZONE 2/ZONE 3 indicators
Light up when Zone 2 or Zone 3 power is on.
10
01EN00_HTR5890U.book Page 11 Thursday, December 23, 2004 12:39 PM
CONTROLS AND FUNCTIONS
Rear panel
2
3
AUDIO
DIGITAL OUTPUT
OPTICAL
AUDIO
L
R
VIDEO
VIDEO
L
R
COMPONENT VIDEO
PR
PB
Y
S VIDEO
MD/TAPE
5
6
REMOTE
RS-232C
IN
DVD
IN
(PLAY)
CD-R
4
7
INTRODUCTION
1
8
CONTROL OUT
OUT
DVD
+12V 15mA MAX.
MD/TAPE
DTV
OUT
(REC)
DTV
IN
(PLAY)
CBL
/SAT
R
+
–
A
–
+
+
–
B
–
+
L
DIGITAL INPUT
CD
DVD
FRONT
CD-R
MONITOR OUT
OUT
(REC)
IN
VCR 1
DTV
CBL/SAT PHONO
SURROUND
FRONT
IN
COAXIAL
AC OUTLETS
+
–
–
+
AC OUTLETS
L
L
R
L
SURROUND
OUT
ZONE 2
SURROUND
+
CD-R
SUB
WOOFER
DVD
CENTER
R
DVR/
VCR 2
CENTER
MULTI CH INPUT
0
ZONE 3
R
+
–
–
+
L
SURROUND BACK
/PRESENCE
SUB
WOOFER
9
R
R
FM ANT
75Ω
UNBAL.
DVR/
VCR 2
CD
GND
L
R
GND
FRONT (6CH)/SB (8CH)
+
AM
ANT
OUT
CD
CENTER
–
TUNER
L
–
SURROUND BACK
PRE OUT
SPEAKERS
C
D
SINGLE
PRESENCE/ZONE 2
MONITOR OUT
OUTPUT
A
B
E
1 DIGITAL OUTPUT jacks
See page 21 for details.
A ZONE 2/ZONE 3 OUTPUT jacks
See page 77 for connection information.
2 Audio component jacks
See page 21 for connection information.
B Antenna terminals
See page 23 for connection information.
3 Video component jacks
See pages 18 and 20 for connection information.
C PRE OUT jacks
See page 22 for connection information.
4 RS-232C terminal
This is a control expansion terminal for commercial use.
Consult your dealer for details.
D Speaker terminals
See page 13 for connection information.
5 REMOTE IN/OUT jacks
See page 77 for connection information.
E PRESENCE/ZONE 2 speaker terminals
See page 14 for connection information.
6 CONTROL OUT jack
See page 77 for connection information.
7 AC OUTLET(S)
Use to supply power to your other A/V components (see
page 24).
8 AC INLET
Use this inlet to plug in the supplied power cable (see
page 24).
9 DIGITAL INPUT jacks
See pages 18, 20 and 21 for details.
English
0 MULTI CH INPUT jacks
See page 19 for connection information.
11
01EN00_HTR5890U.book Page 12 Thursday, December 23, 2004 12:39 PM
SPEAKER SETUP
SPEAKER SETUP
Surround speakers (SR and SL)
Speaker placement
For best results, place the speakers as illustrated below.
PL
PR
C
FR
FL
30˚
SL
SR
The surround speakers are used for effect and surround
sounds. Place these speakers behind your listening
position, facing slightly inwards, about 1.8 m (6 ft) above
the floor.
Surround back speakers (SBR and SBL)
The surround back speakers supplement the surround
speakers and provide for more realistic front-to-back
transitions. Place these speakers directly behind the
listening position and at the same height as the surround
speakers. They should be positioned at least 30 cm (12 in)
apart. Ideally, they should be positioned at the same width
as the front speakers.
60˚
SL
80˚
SBL
SR
The use of a subwoofer, such as the YAMAHA Active
Servo Processing Subwoofer System, is effective not only
for reinforcing bass frequencies from any or all channels,
but also for high fidelity reproduction of the LFE (lowfrequency effect) channel included in Dolby Digital and
DTS software. The position of the subwoofer is not so
critical, because low bass sounds are not highly
directional. But it is better to place the subwoofer near the
front speakers. Turn it slightly toward the center of the
room to reduce wall reflections.
SBR
More than 30 cm (12 in)
.
1.8 m (6 ft)
1.8 m (6 ft)
y
The illustrations show the standard speaker setting recommended
by the ITU-R (see page 93). You can use it to enjoy CINEMA
DSP, multi-channel audio sources, and THX.
Front speakers (FR and FL)
The front speakers are used for the main source sound plus
effect sounds. Place these speakers an equal distance from
the ideal listening position. The distance of each speaker
from each side of the video monitor should be the same.
Center speaker (C)
The center speaker is for the center channel sounds
(dialog, vocals, etc.). If for some reason it is not practical
to use a center speaker, you can do without it. Best results,
however, are obtained with the full system. Align the front
face of the center speaker with the front face of your video
monitor. Place the speaker centrally between the front
speakers and as close to the monitor as possible, such as
directly over or under it.
12
Subwoofer
Presence speakers (PR and PL)
Presence speakers supplement the sound from the front
speakers with extra ambient effects produced by CINEMA
DSP (see page 46). These effects include sounds that
filmmakers intend to locate a little farther back behind the
screen in order to create more theater-like ambience. Place
these speakers at the front of the room about 0.5 - 1 m
(1 - 3 ft) outside the front speakers, facing slightly
inwards, and about 1.8 m (6 ft) above the floor.
Note
Surround back and presence speakers do not output sound
simultaneously. You can set to prioritize either set of speakers in
SOUND MENU (see page 60).
01EN00_HTR5890U.book Page 13 Thursday, December 23, 2004 12:39 PM
SPEAKER SETUP
■ Di-pole speaker layout
Either di-pole or direct radiating speaker types can be used
for THX surround. If you choose di-pole speakers, please
place the surround and surround back speakers according
to the speaker layout below.
FL
FR
C
SR
30˚
30˚
SBL
SBR
: Di-pole speaker
: Direction of di-pole speaker
Be sure to connect the left channel (L), right channel (R),
“+” (red) and “–” (black) properly. If the connections are
faulty, no sound will be heard from the speakers, and if the
polarity of the speaker connections is incorrect, the sound
will be unnatural and lack bass.
CAUTION
• If you will use 6 ohm speakers, be sure to set
this unit’s speaker impedance setting to 6
ohms before using (see page 25).
• Before connecting the speakers, make sure that the
power of this unit is off.
• Do not let the bare speaker wires touch each other or
do not let them touch any metal part of this unit. This
could damage this unit and/or speakers.
• Use magnetically shielded speakers. If this type of
speakers still creates the interference with the monitor,
place the speakers away from the monitor.
A speaker cord is actually a pair of insulated cables
running side by side. One cable is colored or shaped
differently, perhaps with a stripe, groove or ridges.
Connect the striped (grooved, etc.) cable to the “+” (red)
terminals on this unit and your speaker. Connect the plain
cable to the “–” (black) terminals.
10 mm (3/8 in)
1
2
1
Remove approximately 10 mm (3/8 in) of
insulation from each of the speaker cables.
2
Twist the exposed wires of the cable together
to prevent short circuits.
3
Loosen the knob.
The supplied speaker terminal wrench is useful for
loosening or tightening knobs.
4
Insert one bare wire into the hole in the side
of each terminal.
13
PREPARATION
SL
Speaker connections
01EN00_HTR5890U.book Page 14 Thursday, December 23, 2004 12:39 PM
SPEAKER SETUP
5
Tighten the knob to secure the wire.
Speaker terminal wrench
5
4
3
Red: positive (+)
Black: negative (–)
■ Connecting to PRESENCE/ZONE 2 or
PRESENCE speaker terminals
1
3
2
1
Open the tab.
2
Insert one bare wire into the hole of each
terminal.
3
Return the tab to secure the wire.
■ Banana plug connections
First, tighten the knob and then insert the banana plug
connector into the end of the corresponding terminal.
Banana plug
y
You can also use banana plugs with the PRESENCE/ZONE 2 and
PRESENCE speaker terminals. Open the tab, then insert one
banana plug connector into the hole of each terminal. Do not
attempt to close the tabs after connecting the banana plugs.
14
01EN00_HTR5890U.book Page 15 Thursday, December 23, 2004 12:39 PM
SPEAKER SETUP
9
10
4
2
1
8
Front speakers (A)
Right
Left
7
3
6
5
Subwoofer with
built-in amplifier
Center
speaker
Speaker layout
2
PREPARATION
1
Front
speakers
(B)
4
3
RC-232C
R
FRONT
+
–
–
+
+
–
–
+
+
–
–
+
L
CENTER
–
+
SURROUND
R
L
L
R
+
SUB
WOOFER
R
+
–
–
+
L
–
SURROUND BACK
PRE OUT
7
8
Right
Left
Surround speakers
SINGLE
PRESENCE/ZONE 2
SPEAKERS
5
6
Right
Left
Surround back speakers
9
10
Right
Left
Presence speakers
• You can connect both surround back and presence speakers to this unit, but they do not output sound simultaneously.You can set
to prioritize either set of speakers in SOUND MENU (see page 60).
• The surround back speakers output the surround back channel included in Dolby Digital EX and DTS-ES software and only
operate when the Dolby Digital EX, DTS-ES or Dolby Pro Logic IIx decoder is turned on.
• The presence speakers output ambient effects created by the DSP sound fields. They do not output sound when other sound fields
are selected.
15
01EN00_HTR5890U.book Page 16 Thursday, December 23, 2004 12:39 PM
SPEAKER SETUP
■ FRONT terminals
■ CENTER terminals
Connect one or two speaker systems to these terminals. If
you use only one speaker system, connect it to either the
FRONT A or B terminals.
Connect a center speaker to these terminals.
Note
■ SUBWOOFER jack
The Canada model cannot output to two separate speaker systems
simultaneously.
Connect a subwoofer with a built-in amplifier, such as the
YAMAHA Active Servo Processing Subwoofer System,
to this jack.
Bi-wired connection
The unit also allows you to make bi-wired connections to
one speaker system. Use two pairs of speaker cables for
each speaker (one pair for the woofer and one pair for the
tweeter/mid-range). To use the bi-wired connections, press
SPEAKERS A and SPEAKERS B on the front panel so
that both SP A and B light up in the front panel display.
Bi-wired connection
+
–
A
–
+
FRONT +
–
B
–
+
R
This unit
16
L
■ SURROUND terminals
Connect surround speakers to these terminals.
■ SURROUND BACK terminals
Connect surround back speakers to these terminals. If you
only connect one surround back speaker, connect it to the
left (L) terminals.
■ PRESENCE terminals
Connect presence speakers to these terminals.
y
• You can specify the location of speakers connected to the
SPEAKERS B terminals in the SP B menu of the SET MENU
mode (See page 64).
• You can select how the volume control operate with regard to
the ZONE 2 OUTPUT and ZONE 3 OUT PUT in the ZONE 2
SET and ZONE 3 SET menus of the SET MENU mode (See
page 64).
• You can select how the ZONE 2 will be amplified in the ZONE
2 AMP menu of the SET MENU mode (See page 64).
01EN00_HTR5890U.book Page 17 Thursday, December 23, 2004 12:39 PM
CONNECTIONS
CONNECTIONS
Before connecting components
CAUTION
Do not connect this unit or other components to the mains
power until all connections between components are
complete.
Dust protection cap
Pull out the cap from the optical jack before you connect
the fiber optic cable. Do not discard the cap. When you are
not using the optical jack, be sure to put the cap back in
place. This cap protects the jack from dust.
For analog signals
■ Video jacks
left analog cables
L
right analog cables
R
For digital signals
optical cables
O
coaxial cables
C
For video signals
video cables
V
S-video cables
S
This unit has three types of video jacks. Connection
depends on the availability of input jacks on your monitor.
The signals input through the S VIDEO jacks on this unit
are automatically converted for output through the
VIDEO jacks. When V CONV. is set to “ON” (see
page 63), signals input through the VIDEO jacks can be
output through the S VIDEO and COMPONENT VIDEO
jacks. Likewise, signals input through the S VIDEO jacks
can also be output through the COMPONENT VIDEO
jacks.
S VIDEO
VIDEO
COMPONENT VIDEO
PR
PB
Y
V
V
■ Analog jacks
V
You can input analog signals from audio components by
connecting audio pin cables to the analog jacks on this
unit. Connect red plugs to the right jacks and white plugs
to the left jacks.
■ Digital jacks
This unit has digital jacks for direct transmission of digital
signals through either coaxial or fiber optic cables. You
can use the digital jacks to input PCM, Dolby Digital and
DTS bitstreams. When you connect components to both
the COAXIAL and OPTICAL jacks, priority is given to
the input signals from the COAXIAL jack. All digital
input jacks are compatible with 96-kHz sampling digital
signals.
VIDEO jack
For conventional composite video signals.
S VIDEO jack
For S-video signals, separated into luminance (Y) and
color (C) video signals to achieve high-quality color
reproduction.
COMPONENT VIDEO jacks
For component signals, separated into luminance (Y) and
color difference (PB, PR) to provide the best quality in
picture reproduction.
Signal flow inside this unit
Input
Note
This unit handles digital and analog signals independently. Thus
audio signals input to the analog jacks are only output to the
analog OUT (REC) jacks. Likewise audio signals input to the
digital (OPTICAL or COAXIAL) jacks are only output to the
DIGITAL OUTPUT jacks.
Output
(MONITOR OUT)
COMPONENT
VIDEO
S VIDEO
VIDEO
Only when V CONV. is set to ON
(see page 63)
Note
When signals are input through both the S VIDEO and VIDEO
jacks, signals input through the S VIDEO jack have priority.
17
PREPARATION
■ Cable indications
01EN00_HTR5890U.book Page 18 Thursday, December 23, 2004 12:39 PM
CONNECTIONS
Connecting video components
■ Connections for DVD playback
Coaxial out
Optical out
Video out
DVD player
Audio out
C
R
O
L
AUDIO
DIGITAL OUTPUT
OPTICAL
R
AUDIO
L
VIDEO
VIDEO
L
R
DVD
IN
(PLAY)
CD-R
COMPONENT VIDEO
PR
PB
Y
S VIDEO
MD/TAPE
DVD
MD/TAPE
OUT
(REC)
Video in
DIGITAL INPUT
CD
IN
(PLAY)
DVD
CD-R
MONITOR OUT
OUT
(REC)
TUNER
AM
ANT
CD
COAXIAL
M
GND
CBL/SAT PHONO
FM ANT
MAIN/SURROUND BACK
SUR
CD
75Ω
UNBAL.
ZONE 2
SURROUND
SUB
WOO
DVD
DTV
SUB
WOOFER
GND
18
CENTER
MULCH CH INPUT
ZONE 3
OUTPUT
MONITOR OUT
Video
monitor
01EN00_HTR5890U.book Page 19 Thursday, December 23, 2004 12:39 PM
CONNECTIONS
■ Connecting to the MULTI CH INPUT jacks
This unit is equipped with 6 additional input jacks (left and right FRONT, CENTER, left and right SURROUND and
SUBWOOFER) for discrete multi-channel input from a multi-format player, external decoder, sound processor or preamplifier.
If you set MULTI CH INPUT 6ch/8ch to “8ch” (see page 62), you can use input jacks assigned as MULTI CH INPUT
FRONT (page 62) together with the MULTI CH INPUT jacks to input 8 channels.
Connect the output jacks on your multi-format player or external decoder to the MULTI CH INPUT jacks. Be sure to
match the left and right outputs to the left and right input jacks for the front and surround channels.
For 6-channel input
For 8-channel input
AUDIO
R
SURROUND
SURROUND
IN
(PLAY)
AUDIO
L
R
L
DVD
MD/TAPE
DTV
SUB
WOOFER
SUB
WOOFER
CENTER
IN
(PLAY)
CENTER
CBL
/SAT
MULTI CH INPUT
MULTI CH INPUT
CD-R
IN
VCR 1
R
L
Subwoofer
out
R
L
R
L
Center
out
Center
out
Front
out
Subwoofer
out
Multi-format player/
External decoder Surround
out
Surround
back out
R
L
CD
Surround
out
Multi-format player/
External decoder
IN
DVR/
VCR 2
R
Front out
L
Notes
• When you select MULTI CH INPUT as the input source, this unit automatically turns off the digital sound field processor, and you
cannot select sound field programs.
• This unit does not redirect signals input to the MULTI CH INPUT jacks to accommodate for missing speakers. We recommend that
you connect at least a 5.1-channel speaker system before using this feature.
• When headphones are used, only front L/R channels are output.
19
PREPARATION
FRONT(6CH)/SB(8CH)
FRONT(6CH)/SB(8CH)
01EN00_HTR5890U.book Page 20 Thursday, December 23, 2004 12:39 PM
CONNECTIONS
■ Connections for other video components
Optical out
Video out
Cable TV or
satellite tuner
Audio out
R
O
L
AUDIO
DIGITAL OUTPUT
OPTICAL
AUDIO
L
R
VIDEO
VIDEO
L
R
COMPONENT VIDEO
PR
PB
Y
S VIDEO
MD/TAPE
IN
(PLAY)
CD-R
MD/TAPE
DTV
OUT
(REC)
DIGITAL INPUT
CD
CBL
/SAT
IN
(PLAY)
CD-R
CD-R
OUT
(REC)
IN
TUNER
VCR 1
DVD
AM
ANT
OUT
CD
MA
GND
CBL/SAT PHONO
IN
COAXIAL
DVR/
VCR 2
MAIN/SURROUND BACK
FM ANT
SURR
CD
OUT
ZONE 2
SURROUND
75Ω
UNBAL.
CD-R
SUB
WOOF
DVD
DVR/
VCR2
SUB
WOOFER
GND
C
ZONE 3
CENTER
MULCH CH INPUT
R
L
Connect a YAMAHA
CD recorder that
outputs OSD signals.
OUTPUT
R
L
Audio in
Video in
DVD recorder
or VCR
Audio out
Video out
Coaxial out
■ VIDEO AUX jacks (on the front panel)
Use these jacks to connect any video source, such as
a game console or camcorder, to this unit.
S VIDEO
VIDEO
S
V
L AUDIO R
OPTICAL
VIDEO AUX
L
R
O
Optical out
Audio out R
Audio out L
Video out
S-video out
20
Game
console or
video camera
01EN00_HTR5890U.book Page 21 Thursday, December 23, 2004 12:39 PM
CONNECTIONS
Connecting audio components
■ Connections for audio components
Optical in
MD recorder or
tape deck
Audio out
Audio in
R
O
L
R
L
R
PREPARATION
AUDIO
DIGITAL OUTPUT
OPTICAL
AUDIO
L
L
R
MD/TAPE
IN
(PLAY)
CD-R
Optical in
MD/TAPE
OUT
(REC)
O
Optical out
DIGITAL INPUT
Audio out
CD
IN
(PLAY)
O
L
CD-R
R
OUT
(REC)
Audio out
DVD
R
Audio in
CD
L
CD player
R
CBL/SAT PHONO
COAXIAL
CD recorder*
L
*
MAIN/SURROUND BACK
CD
C
Coaxial out
Some CD recorders can
be connected to the
VIDEO CD-R jacks
(see page 20).
ZONE 2
SURROUND
DVD
Audio out
DTV
SUB
WOOFER
GND
L
CENTER
MULCH CH INPUT
ZONE 3
OUTPUT
R
GND
■ Connecting a turntable
PHONO jacks are for connecting a turntable with an MM
or high-output MC cartridge. If you have a turntable with
a low-output MC cartridge, use an in-line boosting
transformer or MC-head amplifier when connecting to
these jacks.
Turntable
y
Connect your turntable to the GND terminal to reduce noise in
the signal. However, you may hear less noise without the
connection to the GND terminal for some record players.
21
01EN00_HTR5890U.book Page 22 Thursday, December 23, 2004 12:39 PM
CONNECTIONS
■ Connecting to an external amplifier
If you want to increase the power output to the speakers,
or want to use another amplifier, connect an external
amplifier to the PRE OUT jacks as follows.
Notes
• When audio pin plugs are connected to the PRE OUT jacks for
output to an external amplifier, it is not necessary to use the
corresponding SPEAKERS terminals. Set the volume of the
external amplifier connected to this unit to the maximum.
• The signal output through the FRONT PRE OUT and CENTER
PRE OUT jacks are affected by the TONE CONTROL settings.
• If SPEAKERS A is turned off and SP B is set to ZONE B (see
page 64), signals will only be output from the FRONT PRE
OUT jacks.
1
L
R
FRONT
2
R
L
SURROUND
3
4
5
SUB
WOOFER
CENTER
R
L
SURROUND BACK
/PRESENCE
PRE OUT
1 FRONT PRE OUT jacks
Front channel line output jacks.
2 SURROUND PRE OUT jacks
Surround channel line output jacks.
3 SUBWOOFER PRE OUT jack
Connect a subwoofer with built-in amplifier, such as the
YAMAHA Active Servo Processing Subwoofer System,
to this jack.
4 SURROUND BACK/PRESENCE PRE OUT
jacks
Surround back or presence channel line output jacks.
5 CENTER PRE OUT jack
Center channel line output jack.
Notes
• Each PRE OUT jack outputs the same channel signal as the
corresponding speaker terminals. However, when both surround
back and presence speakers are setup in this unit, the signals
output from SURROUND BACK/PRESENCE PRE OUT jacks
may not correspond to the correct speakers.
• Adjust the volume level of the subwoofer with the control on
the subwoofer. It is also possible to adjust the volume level by
using the remote control (see “Manually adjusting speaker
levels” on page 51).
• Some signals may not be output from the SUBWOOFER PRE
OUT jack depending on the SPEAKER SET (see page 55) and
LFE/BASS OUT (see page 56) settings.
22
01EN00_HTR5890U.book Page 23 Thursday, December 23, 2004 12:39 PM
CONNECTIONS
Connecting the antennas
Both AM and FM indoor antennas are included with this
unit. In general, these antennas should provide sufficient
signal strength. Connect each antenna correctly to the
designated terminals.
AM loop antenna
(included)
Indoor FM antenna
(included)
COMPONENT VIDEO
PR
PB
Y
VD
Notes
• The AM loop antenna should be placed away from this unit.
• The AM loop antenna should always be connected, even if an
outdoor AM antenna is connected to this unit.
• A property installed outdoor antenna provides clearer reception
than an indoor one. If you experience poor reception quality, an
outdoor antenna may improve the quality. Consult the nearest
authorized YAMAHA dealer or service center about outdoor
antennas.
TV
PREPARATION
ONITOR OUT
TUNER
AM
ANT
MAIN
GND
FM ANT
75Ω
UNBAL.
SURRO
SUB
WOOFE
Ground (GND terminal)
For maximum safety and minimum interference,
connect the antenna GND terminal to a good earth
ground. A good earth ground is a metal stake driven
into moist earth.
■ Connecting the AM loop antenna
1
Set up the AM loop antenna, then connect it
to the terminals on this unit.
2
Press and hold the tab to insert the AM loop
antenna lead wires into the AM ANT and GND
terminals.
3
Orient the AM loop antenna for the best
reception.
23
01EN00_HTR5890U.book Page 24 Thursday, December 23, 2004 12:39 PM
CONNECTIONS
Connecting the power supply cord
■ Connecting the AC power cord
Plug the power cord into the AC inlet after all other
connections are complete, then plug the power cord to an
AC wall outlet.
CAUTION
AC OUTLETS
Do not use other AC power cords. Use the one provided.
Use of other power cords may result in fire hazard or
electrical shock.
■ AC OUTLET(S) (SWITCHED)
Use outlets to connect the power cords from your other
components to this unit. Power to the AC OUTLET is
controlled by this unit’s STANDBY/ON (or SYSTEM
POWER and STANDBY). These outlets will supply
power to any connected component whenever this unit is
turned on. The maximum power (total power consumption
of components) that can be connected to the AC OUTLET
is 100 W.
■ Memory back-up
The memory back-up circuit prevents the stored data from
being lost even if this unit is in the standby mode.
However if the power cord is disconnected from the AC
wall outlet, or the power supply is cut for more than one
week, the stored data will be lost.
24
01EN00_HTR5890U.book Page 25 Thursday, December 23, 2004 12:39 PM
CONNECTIONS
Speaker impedance setting
Turning on the power
When all connections are complete, turn on the power of
this unit.
CAUTION
If you are using 6 ohm speakers, set the impedance to
6 ohms as follows before turning on the power.
1
Be sure this unit is in the standby mode.
VOLUME
1
On the front panel, while holding down
SPEAKERS A, press STANDBY/ON.
“SP IMP.SET” appears in the front panel display for a
few seconds, then “Minimum 8ohms” appears.
PURE DIRECT
STANDBY
/ON
PRESET/TUNING
OPTIMIZER
MIC
FM/AM
A/B/C/D/E
PRESET/TUNING
EDIT
MEMORY
TUNING MODE
MAN'L/AUTO FM
AUTO/MAN'L MONO
INPUT
SPEAKERS
A
PREPARATION
PROGRAM
PHONES
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
EFFECT
S VIDEO
SILENT CINEMA
VIDEO
L
AUDIO
R
OPTICAL
SPEAKERS
A
STANDBY
/ON
SYSTEM
POWER
POWER
TV
AV
A
B
INPUT MODE
STANDBY
POWER
SLEEP
PHONO
TUNER
CD
MULTI CH IN
V-AUX
CBL/SAT
MD/TAPE
CD-R
DTV
VCR 1
DVR/VCR2
DVD
1
SP IMP.SET
SELECT
AMP
+
Minimum 8ohms
2
3
1
SYSTEM
POWER
STANDBY
/ON
Front panel
y
You can also use SP IMP.SET (see page 63) to set the speaker
impedance.
+
Press STANDBY/ON (SYSTEM POWER on the
remote control) to turn on the power of this
unit.
Press SPEAKERS A or SPEAKERS B to
select the impedance of your speakers.
You can select either 6 ohms or 8 ohms.
Press STANDBY/ON to exit the setting.
This unit will be set to the standby mode.
+
2
or
Remote control
Turn on the video monitor connected to this
unit.
Note
Press STANDBY/ON again (STANDBY on the remote control)
to enter the standby mode.
25
01EN00_HTR5890U.book Page 26 Thursday, December 23, 2004 12:39 PM
AUTO SETUP
AUTO SETUP
Introduction
This receiver employs YAMAHA Parametric Room
Acoustic Optimizer (YPAO) technology which lets you
avoid troublesome listening-based speaker setup and
achieves highly accurate sound adjustments. The supplied
optimizer microphone collects and analyzes the sound
your speakers produce in your actual listening
environment.
Optimizer microphone setup
1
Connect the supplied optimizer microphone
to the OPTIMIZER MIC jack on the front
panel.
PRESET/TUNING
OPTIMIZER
MIC
FM/AM
A/B/C/D/E
PRESET/TUNING
EDIT
PROGRAM
y
PHONES
DISTANCE
Checks the distance of each speaker from the listening
position and adjusts the timing of each channel.
SIZE
Checks the speaker’s frequency response and sets the
appropriate low frequency crossover for each channel.
EQUALIZING
Adjusts frequency and levels of each channel’s parametric
equalizer to reduce coloration across the channels and
create a cohesive sound field. This is particularly
important if you use different brands or sizes of speakers
for some channels or have a room with unique sonic
characteristics.
YPAO equalizing calibration incorporates three
parameters (frequency, level and Q factor) for each of the
seven bands in its parametric equalizer to provide highly
precise automatic adjustment of frequency characteristics.
LEVEL
Checks and adjusts the sound level (volume) of each
speaker.
26
STRAIGHT
INPUT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
SILENT CINEMA
Notes
• Please be advised that it is normal for loud test tones to be
output during the auto setup procedure.
• If auto setup stops and error messages appear on the screen,
follow the troubleshooting on page 29.
WIRING
Checks which speakers are connected and the polarity of
each speaker.
B
EFFECT
Notes
YPAO performs the following checks and makes
appropriate adjustments to give you the best possible
sound from your system.
TUNING MODE
AUTO/MAN'L MONO
SPEAKERS
A
The basic setup feature (page 31) is useful if you want to set up
your system quickly and with minimal effort. However, we
recommend that you come back and perform auto setup later to
take advantage of YPAO and enjoy even higher fidelity.
MEMORY
MAN'L/AUTO FM
• After you have completed the auto setup procedure, be
sure to disconnect the optimizer microphone.
• The optimizer microphone is sensitive to heat.
–Keep it away from direct sunlight.
–Do not place it on top of this unit.
2
Place the optimizer microphone on a flat
level surface with the omni-directional
microphone head upward, at your normal
listening position.
If possible, use a tripod (etc.) to affix the optimizer
mic at the same height as your ears would be when
you are seated in your listening position.
Optimizer microphone position
01EN00_HTR5890U.book Page 27 Thursday, December 23, 2004 12:39 PM
AUTO SETUP
Starting the setup
4
For best results, make sure the room is as quiet as possible
during the auto setup procedure (YPAO). If there is too
much ambient noise, the results may not be satisfactory.
Press k / n repeatedly to select WIRING,
DISTANCE, SIZE, EQUALIZING or LEVEL.
1 AUTO:MENU
.WIRING;;;;;CHECK
DISTANCE;;;CHECK
SIZE;;;;;;;CHECK
EQUALIZING;;FLAT
LEVEL;;;;;;CHECK
SETUP;;;;;;;AUTO
START PUSH >
y
If your subwoofer can adjust the output volume and the crossover
frequency, set the volume to about half way (or slightly less) and
set the crossover frequency to the maximum.
p
/p
: Up/Down
< / > : Select
CROSSOVER/
HIGH CUT
VOLUME
MIN
MAX
MIN
CHECK To automatically check and adjust the selected
MAX
Subwoofer
1
2
SKIP
Switch on this unit and video monitor.
Make sure the OSD is displayed (see page 50).
When using THX speakers, set SIZE to SKIP and make sure
that “SMALL” or “SMLx2” is selected in SPEAKER SET
(page 55) and that 80Hz (THX) is selected in CROSS
OVER (page 57).
SET MENU
then
When EQUALIZING is selected, press l / h
to select:
FRONT
To adjust the frequency response of
each speaker in accordance with the
sound of your front speakers.
Recommended if your front speakers
are of much higher quality than your
other speakers.
FLAT
To average the frequency response of
all speakers. Recommended if all of
your speakers are of similar quality.
LOW
To average the frequency response of
all speakers, giving priority to the
accuracy of bass frequencies.
MID
To average the frequency response of
all speakers, giving priority to the
accuracy of mid-range frequencies.
HIGH
To average the frequency response of
all speakers, giving priority to the
accuracy of high frequencies.
SKIP
To skip the selected item and perform
no adjustments.
MENU
SOURCE
TV
3
Press k / n to select AUTO SETUP, then
press h once to enter the main menu.
ENTER
SET MENU
. ;AUTO SETUP
;MANUAL SETUP
p
/p
: Up/Down
< / > : Enter
6
ENTER
item.
To skip the selected item and perform no
adjustments.
Note
Set AMP/SOURCE/TV to AMP, then press
SET MENU to enter the SET MENU.
AMP
When WIRING, DISTANCE, SIZE or LEVEL is
selected, press l / h to select:
Press n to select SETUP, then press l / h to
select:
AUTO
To automatically perform the entire
auto setup procedure.
STEP
To pause for confirmation between
each check in the auto setup procedure.
RELOAD
To restore the last auto setup setting.
27
PREPARATION
5
01EN00_HTR5890U.book Page 28 Thursday, December 23, 2004 12:39 PM
AUTO SETUP
y
7
Press n to select START PUSH i, then press
h.
Loud test tones will be output from each speaker and
WAIT appears during the auto setup procedure.
Notes
Note
If “E-10:OTHER ERROR” appears during testing, restart the
procedure from step 3.
If you selected “AUTO” in step 6
The RESULT display appears for a few seconds after each
check, then settings of the next item will start. The
RESULT:EXIT display appears after all items are set.
y
You can display each result by pressing k once and pressing h
repeatedly before exiting. Pressing n returns to the
RESULT:EXIT display.
8
To apply the changes, press l / h to select
SET, then press n to exit.
To cancel the auto setup procedure, press
l / h to select CANCEL, then press n to exit.
If you selected “STEP” in step 6
The RESULT display appears after each check.
8
Press l / h to display RESULT:EXIT, then
press l / h to select:
NEXT
EXIT
Then press n to proceed and check the next item.
Then press n to exit the auto setup.
RESULT:WIRING
FRONT L;;;;;;;OK
p
p
RESULT:DISTANCE1
RESULT:EQUALIZI.
EQ;;;;;FRONT L
63Hz;;;-2.0dB
125Hz;;;-5.0dB
500Hz;;;;;;0dB
630Hz;;;;;;0dB
1.0kHz;;;;;;0dB
3.15kHz;;;+3.0dB
10.0kHz;;;+1.0dB
/
p
p
/ : Up/Down
</> : Back/Next
: Up/Down
RESULT:LEVEL 1
/ : Up/Down
</> : Back/Next
/ : Up/Down
</> : Back/Next
RESULT:SIZE 1
p
p
/ : Up/Down
</> : Back/Next
p
p
. FRONT L;;;+5.0dB
CENTER;;;;-4.5dB
FRONT R;;;+5.5dB
PRESENCE;;-3.0dB
p
p
. FRONT L;;;;3.20m
CENTER;;;;;3.30m
FRONT R;;;;2.90m
PRES L;;;;;1.70m
PRES R;;;;;1.50m
FRONT L;;;;;;LRG
28
• Press k / n repeatedly to move between each display.
• If you are not satisfied with the result or want to manually
adjust each setup parameter, use the manual setup parameters
(see page 55).
• If you change speakers, speaker positions, or the layout of your
listening environment, perform AUTO SETUP again to recalibrate your system.
• In the DISTANCE results, the distance displayed may be longer
than the actual distance depending on the characteristics of your
subwoofer.
• In the EQUALIZING results, different values may be set for the
same band to provide finer adjustments.
If you selected “RELOAD” in step 6
The RESULT:EXIT display appears.
y
You can display each result by pressing k once and pressing h
repeatedly before exiting. Pressing n returns to the
RESULT:EXIT display.
8
Press l / h to select “SET”, then press n to
exit.
01EN00_HTR5890U.book Page 29 Thursday, December 23, 2004 12:39 PM
AUTO SETUP
■ Troubleshooting for auto setup procedure
Before auto setup
Error message
Cause
Remedy
Connect MIC!
Optimizer microphone is not connected.
• Connect the supplied optimizer microphone to the
OPTIMIZER MIC jack on the front panel.
Unplug HP!
Headphones are connected.
• Unplug the headphones.
Error message
Cause
Remedy
E-1:NO FRONT SP
Front L/R channel signal(s) is (are) not
detected.
• Select the front speakers with SPEAKER A or B.
• Check the front L/R speaker connections.
E-2:NO SURR.SP
A surround channel signal is not detected.
• Check the surround speaker connections.
E-3:NO PRES. SP
A presence channel signal is not detected.
• Check the presence speaker connections.
E-4:SBR->SBL
Only right surround back channel signal is
detected.
• Connect the surround back speaker to the LEFT
SURROUND BACK SPEAKERS terminal if you
only have one surround back speaker.
E-5:NOISY
Background noise is too loud.
• Try auto setup procedure in a quiet environment.
• Turn off noisy electric equipment like air conditioners
(etc.) or move them away from the optimizer
microphone.
E-6:CHECK SURR.
Surround back speaker(s) is (are) connected,
though surround L/R speakers are not.
• Connect surround speakers when you use (a)
surround back speaker(s).
E-7:NO MIC
The optimizer microphone was unplugged
during the auto setup procedure.
• Connect the supplied optimizer microphone to
OPTIMIZER MIC jack on the front panel.
E-8:NO SIGNAL
The optimizer microphone does not detect test
tones.
• Check the microphone setting.
• Check the speaker connections and placement.
E-9:USER CANCEL
The auto setup procedure was cancelled due to
user activity.
• Perform the auto setup procedure again.
E-10:OTHER ERROR
An internal error occurred.
• Perform the auto setup procedure again.
29
PREPARATION
During auto setup
Press l / h to display the detailed information about individual errors. Select “RETRY” to try auto setup procedure
again.
01EN00_HTR5890U.book Page 30 Thursday, December 23, 2004 12:39 PM
AUTO SETUP
After auto setup
Press l / h to display the detailed information about individual warnings.
Warning message
•
•
•
•
Cause
Remedy
W-1:OUT OF PHASE
Speaker polarity is not correct. This message
may appear depending on the speakers even
when the speakers are connected correctly.
• Check the speaker connections for proper polarity
(+ or –).
W-2:OVER 24m
(80ft)
The distance between the speaker and the
listening position is over 24 m (80 ft).
• Bring the speaker closer to the listening position.
W-3:LEVEL ERROR
The difference of volume level among speakers
is excessive. (No level correction is made.)
• Readjust the speaker installation so that all speakers
are set in locations with similar conditions.
• Check the speaker connections.
• Use speakers of similar quality.
• Adjust the output volume of the subwoofer.
W-4:SWFR PHASE
The phase polarity of the subwoofer is not
correct.
• Select the opposite phase on the subwoofer if the
subwoofer has a phase switch.
W-5:VOL ERROR
The result may not be correct because the
volume was changed during the auto setup
procedure.
• Perform the auto setup procedure again. Do not
change the volume during the auto setup procedure.
If the ERROR or WARNING screens appears, check the cause of the problem, then perform the auto setup procedure again.
If warning W-1, W-4 or W-5 appears, corrections are made, but they may not be optimal.
If warning W-2 or W-3 appears, no corrections are made.
If error E-10 occurs repeatedly, please contact a qualified YAMAHA service center.
30
01EN00_HTR5890U.book Page 31 Thursday, December 23, 2004 12:39 PM
BASIC SETUP
BASIC SETUP
The basic system parameters are set automatically when
you run auto setup (page 26). Basic setup is useful if you
want to quickly setup your speakers or to manually adjust
some of the items set in auto setup.
3
Press l / h to enter BASIC MENU.
4
When ROOM is selected, press l / h to
change the setting.
Select the size of the room you have installed your
speakers in. Roughly speaking, the room sizes are
defined as follows:
y
If you wish to configure the unit manually using more precise
adjustments, use the detailed parameters in SOUND MENU
(page 55) instead of BASIC MENU.
S (small)
16 x 13 ft, 200 ft2 (4.8 x 4.0 m, 20 m2)
M (medium) 20 x 16 ft, 300 ft2 (6.3 x 5.0 m, 30 m2)
L (large)
26 x 19 ft, 450 ft2 (7.9 x 5.8 m, 45 m2)
Altering any parameters in BASIC MENU will reset all
parameters in SOUND MENU.
Using BASIC MENU
1 BASIC MENU 1/2
.ROOM: S[ML
SWFR:[YESNONE
PRESENCE;;;;NONE
SPEAKERS;;;;7spk
SELECT
AMP
+
+
+
TV VOL
CH
VOL
SOURCE
–
–
–
TV
A/B/C/D/E
TV MUTE
TV INPUT
MUTE
LEVEL
SET MENU
TITLE
MENU
2-9
1
PURE DIRECT
NIGHT
5
AUDIO
ENTER
TEST
ON SCREEN
RETURN
DISPLAY
STRAIGHT
EFFECT
1
6
SET MENU
then
SOURCE
If you have a subwoofer in your system.
If you do not have a subwoofer in your system.
Press n to select PRESENCE, then press
l / h to select:
MENU
YES
NONE
TV
2
YES
NONE
Set AMP/SOURCE/TV to AMP, then press
SET MENU to enter the SET MENU.
AMP
Press n to select SWFR, then press l / h to
select:
If you have presence speakers in your system.
If you do not have presence speakers in your
system.
Press k / n repeatedly to select MANUAL
SETUP, then press l / h to enter the
selected category.
then
ENTER
ENTER
SET MENU
;AUTO SETUP
. ;MANUAL SETUP
p
/p
: Up/Down
< / > : Enter
If k is pressed when AUTO SETUP is selected, or if
n is pressed when MANUAL SETUP is selected,
SET MENU will be closed. Press SET MENU to
open SET MENU again.
31
PREPARATION
Note
01EN00_HTR5890U.book Page 32 Thursday, December 23, 2004 12:39 PM
BASIC SETUP
7
Press n to select SPEAKERS, then press
l / h to select the number of speakers
connected to the unit.
The choices vary as follows depending on the
PRESENCE setting:
9
Press n to select CHECK OK?, then press
l / h to select:
YES
NO
To exit the setup if the test tones were
satisfactory.
To adjust each speaker level (see page 57).
PRESENCE setting
Choices
Front L/R
2
—
—
L C R
SL SB SR
3
—
—
L C R
SL SB SR
Front L/R,
Center
L C R
SL SB SR
Front L/R,
Surround L/R
4
L
5
L C R
6
7
8
L
SL
R
R
SR
L C R
SL
SR
L C R
SL SB SR
L C R
SL SB SR
9
*
1 BASIC MENU 2/2
NONE
YES
Presence L/R,
Front L/R
Presence L/R,
Front L/R,
Center
L C R
SL SB SR
Presence L/R,
Front L/R,
Surround L/R
L C R
SL SB SR
Presence L/R,
Front L/R,
Center,
Surround L/R
L C R
SL SB SR
Front L/R,
Center,
Surround L/R
Front L/R,
Center,
Surround L/R,
Surround back
L/R
Presence L/R,
Front L/R,
Center,
Surround L/R,
Surround back*
—
—
Presence L/R,
Front L/R,
Center,
Surround L/R,
Surround back
L/R*
—
—
After you have finished the settings, press n,
then press l / h to select:
SET
CANCEL
To apply the changes.
To cancel the setup.
1 BASIC MENU 2/2
.
[SET
CANCEL
ROOM SIZE=MEDIUM
If you select “SET”, you will hear a test tone from
each speaker.
32
(when “NO” is selected)
B)SPEAKER LEVEL
.
FR
C
SL
+
Front L/R,
Center,
Surround L/R,
Surround back
Surround back and presence speakers do not output sound
simultaneously. You can set to prioritize either set of speakers
in SOUND MENU (see page 60).
8
. CHECK OK?;;;;YES
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is in the standby mode.
However, if the power cord is disconnected from the
AC outlet, or the power supply is cut for more than one
week, the stored data will be lost. If so, adjust the
items again.
01EN00_HTR5890U.book Page 33 Thursday, December 23, 2004 12:39 PM
PLAYBACK
PLAYBACK
Basic operations
4
1
6
Select the input source.
Use INPUT (or press one of the input selector buttons
on the remote control) to select the input you desire.
INPUT
VOLUME
PHONO
TUNER
CD
MULTI CH IN
V-AUX
CBL/SAT
MD/TAPE
CD-R
DTV
VCR 1
DVR/VCR2
DVD
or
PURE DIRECT
STANDBY
/ON
PRESET/TUNING
OPTIMIZER
MIC
FM/AM
A/B/C/D/E
PRESET/TUNING
EDIT
PROGRAM
PHONES
MEMORY
TUNING MODE
MAN'L/AUTO FM
AUTO/MAN'L MONO
INPUT
SPEAKERS
A
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
Front panel
EFFECT
S VIDEO
SILENT CINEMA
3
VIDEO
L
AUDIO
R
OPTICAL
4
7
V–AUX
1
POWER
TV
AV
STANDBY
POWER
A
B
INPUT MODE
SLEEP
PHONO
TUNER
CD
MULTI CH IN
DTV
DVD
MD/TAPE
CD–R
CD
TUNER
LEVEL
SET MENU
TITLE
MENU
DVD
PURE DIRECT
PHONO
dB
VOLUME
AUTO
L
R
NIGHT
CBL/SAT
MD/TAPE
AUDIO
TEST
ON SCREEN
RETURN
DISPLAY
Selected input source
STRAIGHT
Input mode
CD-R
STEREO
VCR 1
DVR/VCR2
+
TV VOL
+
+
CH
VOL
–
–
JAZZ
ROCK
1
2
3
4
ENTERTAIN
MUSIC
TV THTR
MOVIE
5
6
7
8
THX
STANDARD
9
0
FREQ/RDS
EON
AMP
REC
SOURCE
DISC SKIP
OFF
–
HALL
DVD
SELECT
ON
MACRO
7
TV MUTE
TV INPUT
+10
SET MENU
TITLE
MENU
Start playback or select a broadcast station
on the source component.
Refer to the operation instructions for the component.
6
Adjust the volume to the desired output level.
ENT.
MODE PTY SEEK START
LEARN
CLEAR
RE–NAME
TV
MUTE
LEVEL
5
EXTD. SUR
A/B/C/D/E
1
CBL/SAT
EFFECT
V-AUX
DTV
7
VCR 1
MUTE
PURE DIRECT
VOLUME
+
Press STANDBY/ON (SYSTEM POWER on the
remote control) to turn on the power.
or
VOL
–
SYSTEM
POWER
STANDBY
/ON
or
Front panel
Front panel
Remote control
Remote control
2
Turn on the video monitor connected to this
unit.
3
Press SPEAKERS A or B on the front panel.
Each press turns the respective speakers on or off.
SPEAKERS
A
B
When bi-wiring, select both A and B.
33
BASIC
OPERATION
POWER
TV INPUT
ENTER
6
DVR/VCR2
SP
A
TV MUTE
SYSTEM
4
Remote control
The current input source name and input mode appear
in the front panel display and video monitor for a few
seconds.
01EN00_HTR5890U.book Page 34 Thursday, December 23, 2004 12:39 PM
PLAYBACK
7
Select a sound field program if desired.
Use PROGRAM (or set AMP/SOURCE/TV to AMP,
then press one of the sound field program buttons
repeatedly) to select a sound field program. See
page 46 for details about sound field programs.
Selecting sound field programs
■ Front panel operation
VOLUME
PURE DIRECT
AMP
PROGRAM
STEREO
HALL
JAZZ
ROCK
1
2
3
4
ENTERTAIN
MUSIC
TY THTR
MOVIE
5
6
7
8
STANDBY
/ON
PRESET/TUNING
or
SOURCE
OPTIMIZER
MIC
Front panel
THX
STANDARD
9
0
A/B/C/D/E
PRESET/TUNING
PROGRAM
MEMORY
TUNING MODE
MAN'L/AUTO FM
AUTO/MAN'L MONO
INPUT
SPEAKERS
A
TV
FM/AM
EDIT
PHONES
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
EXTD. SUR
+10
ENT.
EFFECT
S VIDEO
SILENT CINEMA
VIDEO
L
AUDIO
R
OPTICAL
Remote control
PROGRAM
Note
When this unit detects Dolby Digital signals, the following
display appears for a few seconds. This shows how the signal
level is being corrected to become –27 dB (THX
recommendation).
Rotate PROGRAM to select the desired program.
The name of the selected program appears in the front
panel display and video monitor.
PROGRAM
DialNorm;;+4dB
V–AUX
DVR/VCR2
VCR 1
CBL/SAT
SP
A
DTV
DVD
MD/TAPE
CD–R
HiFi DSP
JAZZ CLUB
Program name
34
CD
TUNER
PHONO
dB
VOLUME
L
R
01EN00_HTR5890U.book Page 35 Thursday, December 23, 2004 12:39 PM
PLAYBACK
■ Remote control operation
Additional operations
AMP
+
+
+
TV VOL
CH
VOL
AMP/SOURCE/TV
SOURCE
–
–
–
■ To adjust the tone
TV
A/B/C/D/E
TV MUTE
TV INPUT
MUTE
LEVEL
SET MENU
TITLE
MENU
NIGHT
AUDIO
ENTER
TEST
ON SCREEN
RETURN
DISPLAY
STRAIGHT
EFFECT
STEREO
HALL
JAZZ
1
2
3
4
ENTERTAIN
MUSIC
TV THTR
MOVIE
5
6
7
8
THX
STANDARD
9
0
Sound field
program
buttons
ROCK
EXTD. SUR
+10
PROGRAM
ENT.
Set AMP/SOURCE/TV to AMP, then press one of
the sound field program buttons repeatedly to
select the desired program.
The name of the selected program appears in the front
panel display and video monitor.
AMP
SOURCE
DVR/VCR2
VCR 1
CBL/SAT
SP
A
DTV
STEREO
HALL
JAZZ
1
2
3
4
ENTERTAIN
MUSIC
TV THTR
MOVIE
5
6
7
8
THX
STANDARD
9
0
DVD
MD/TAPE
ROCK
EXTD. SUR
+10
CD–R
HiFi DSP
JAZZ CLUB
Notes
ENT.
CD
TUNER
PHONO
dB
VOLUME
L
R
Program name
y
Choose a sound field program based on your listening preference,
and not on the name of the program.
Notes
• When you select an input source, this unit automatically selects
the last sound field program used with that source.
• Sound field programs cannot be selected when the MULTI CH
INPUT is selected.
• If you increase or decrease the high-frequency or the lowfrequency sound to an extreme level, the tonal quality of the
surround speakers may not match that of the front left/right and
center speakers.
• TONE CONTROL is not effective when THX (page 46) or
PURE DIRECT (page 37) is selected, or when MULTI CH
INPUT is selected.
• TONE CONTROL is not effective for headphones. Use HP
TONE CTRL to adjust bass/treble balance for the headphones
(page 59).
■ To mute the sound
Press MUTE on the remote control.
MUTE
The MUTE indicator flashes in the
front panel display.
To resume the audio output, press
MUTE again. (or press VOL –/+). The MUTE indicator
disappears from the display.
y
You can adjust the muting level (see page 59).
■ To listen with headphones
(“SILENT CINEMA”)
“SILENT CINEMA” allows you to enjoy multi-channel
music or movie sound, including Dolby Digital and DTS
surround, through ordinary headphones. “SILENT
CINEMA” activates automatically whenever you connect
headphones to the PHONES jack while listening to
CINEMA DSP or HiFi DSP sound field programs. When
activated, the “SILENT CINEMA” indicator lights up in
the front panel display.
Notes
• This unit will not be set to “SILENT CINEMA” when MULTI
CH INPUT is selected as the input source.
• “SILENT CINEMA” is not effective when PURE DIRECT or a
2ch stereo program is selected, or in STRAIGHT mode.
35
BASIC
OPERATION
TV
V–AUX
You can adjust the bass/treble
balance for the front left/right and
center channels.
Press TONE CONTROL
repeatedly on the front panel to
select TREBLE or BASS.
Select TREBLE, then rotate
PROGRAM to the right or left to
increase or decrease the highfrequency response.
Select BASS, then rotate PROGRAM to the right or left to
increase or decrease the low-frequency response.
To cancel the tone control, press TONE CONTROL
repeatedly to select BYPASS.
TONE CONTROL
PURE DIRECT
01EN00_HTR5890U.book Page 36 Thursday, December 23, 2004 12:39 PM
PLAYBACK
■ Selecting the MULTI CH INPUT
Press MULTI CH INPUT so that “MULTI CH INPUT”
appears in the front panel display and video monitor.
MULTI CH
INPUT
MULTI CH IN
or
Front panel
Remote control
Note
When “MULTI CH INPUT” is shown in the front panel display
and/or the video monitor, no other source can be played. To select
another input source with INPUT (one of the input selector
buttons), press MULTI CH INPUT to turn off “MULTI CH
INPUT” from the front panel display and the video monitor.
■ Enjoying multi-channel software in
6.1/7.1 channel surround
If you connected one or two surround back speakers, use
this feature to enjoy 6.1/7.1-channel playback for multichannel sources using the Dolby Pro Logic IIx, Dolby
Digital EX or DTS-ES decoders.
Set AMP/SOURCE/TV to AMP, then press EXTD.
SUR on the remote control to switch between 5.1and 6.1/7.1 channel playback.
EXTD. SUR
ENT.
To select a decoder, press l / h repeatedly
when PLIIxMovie (etc.) is displayed.
AUTO (AUTO)
When a signal (flag) that can be recognized by the unit is
input, the unit selects the optimum decoder for playing
back the signal in 6.1/7.1 channels.
If the unit cannot recognize the flag or no flag is present in
the input signal, it cannot automatically be played in 6.1/
7.1 channels.
36
Decoders (select with l / h)
You can select from the following modes depending on
the format of the software you are playing.
PLIIxMovie
For playing back Dolby Digital or DTS signals in 7.1
channels using the Pro Logic IIx movie decoder.
PLIIxMusic
For playing back Dolby Digital or DTS signals in 6.1/7.1
channels using the Pro Logic IIx music decoder.
EX/ES
For playing back Dolby Digital signals in 6.1/7.1 channels
using the Dolby Digital EX decoder.
DTS signals are played back in 6.1/7.1 channels using the
DTS-ES decoder.
EX
For playing back Dolby Digital or DTS signals in 6.1/7.1
channels using the Dolby Digital EX decoder.
OFF (OFF)
For playing back Dolby Digital or DTS signals in 5.1
channels.
y
When SURR B L/R SP is set to “LRGx1” or “SMLx1” (see
page 56), the surround back channel will output from the left
SURROUND BACK speaker terminals.
Notes
• Some 6.1-channel compatible discs do not have a signal (flag)
which this unit can automatically detect. When playing these
kinds of discs with 6.1-channel, select decoders (PLIIxMovie,
PLIIx Music, EX/ES or EX) manually.
• 6.1-channel playback is not possible even if EXTD. SUR is
pressed in the following cases:
– When SURR L/R SP or SURR B L/R SP is set to “NONE”
(see page 56).
– When the source connected to the MULTI CH INPUT jack is
being played.
– When the source being played does not contain surround L/R
channel signals.
– When a Dolby Digital KARAOKE source is being played.
– When 2ch Stereo or PURE DIRECT is selected.
• When the power of this unit is turned off, the input mode will be
reset to AUTO.
• When the DTS-ES decoder is applied to DTS 96/24 signals, this
unit decodes the DTS 96/24 signals using DTS-ES Matrix
decoder.
• The Pro Logic IIx decoder is not available when SURR B L/R
SP is set to “NONE” (see page 56).
• “PLIIxMovie” cannot be selected when SURR B L/R SP is set
to “LRGx1” or “SMLx1” (see page 56).
01EN00_HTR5890U.book Page 37 Thursday, December 23, 2004 12:39 PM
PLAYBACK
■ Enjoying 2-channel software in surround
Signals input from 2-channel sources can also be played
back on multiple channels.
Press STANDARD on the remote control to select
the decoder.
STANDARD
0
You can select from the following modes depending on
the type of software you are playing and your personal
preference.
■ Listening to high fidelity stereo sound
with PURE DIRECT
PURE DIRECT bypasses this unit’s decoders and DSP
processors as well as shuts down the video circuitry,
allowing you to enjoy the highest possible sound fidelity
from analog and PCM sources.
Press PURE DIRECT to activate pure direct.
The button lights up and the front panel display
automatically goes out.
PURE DIRECT
PURE DIRECT
or
PRO LOGIC SUR. STANDARD
Standard processing for Dolby Surround sources.
PRO LOGIC SUR. ENHANCED
CINEMA DSP enhanced processing for Dolby Surround
sources
PRO LOGIC IIx Music*
Dolby Pro Logic II/IIx processing for music software.
PRO LOGIC IIx Game*
Dolby Pro Logic II/IIx processing for game software.
DTS Neo:6 Cinema
DTS processing for movie software.
DTS Neo:6 Music
DTS processing for music software.
*
Use the PLII/PLIIx parameter to select the Pro Logic II or
Pro Logic IIx decoders (see page 85).
Note
The Pro Logic IIx decoder is not available when SURR B L/R SP
is set to “NONE” (see page 56).
Remote control
y
The front panel display switches on momentarily when an
operation is performed.
To cancel, press PURE DIRECT again.
The indicator around the front panel button goes out and
the previous settings are restored.
Notes
• To avoid unexpected noise, do not play DTS-encoded CDs in
this mode.
• When a multi-channel signal (Dolby Digital or DTS) is input,
this unit automatically switches to the corresponding analog
input. (When DTS is selected as an input mode, no sound will
be heard.)
• No sound will be output from the subwoofer.
• TONE CONTROL (page 35) and SET MENU (page 53)
settings are not effective.
• The following operations are not possible during PURE
DIRECT operation:
– switching the sound field program
– displaying the OSD
– adjusting SET MENU parameters
– all video functions (video conversion etc.)
• PURE DIRECT is automatically cancelled whenever this unit is
set to the standby mode.
37
BASIC
OPERATION
PRO LOGIC IIx Movie*
Dolby Pro Logic II/IIx processing for movie software.
Front panel
01EN00_HTR5890U.book Page 38 Thursday, December 23, 2004 12:39 PM
PLAYBACK
■ Listening to high fidelity stereo sound
with Direct Stereo
Direct Stereo bypasses this unit’s decoders and DSP
processors, allowing you to enjoy high fidelity sound from
2-channel PCM and analog sources.
y
This operation is recommended for use when high fidelity stereo
sound is desired with playback of a video source. Otherwise,
PURE DIRECT is recommended for the highest possible sound
fidelity (see page 37).
■ Night listening modes
The night listening modes are designed to improve
listenability at lower volumes or at night. Choose either
NIGHT:CINEMA or NIGHT:MUSIC depending on the
type of material you are playing.
Press NIGHT on the remote control repeatedly to
select cinema or music.
When night listening is selected, the NIGHT indicator in
the front panel display lights up.
NIGHT
Rotate PROGRAM (or press STEREO repeatedly)
to select DIRECT STEREO.
The front panel display automatically dims.
STEREO
PROGRAM
or
Front panel
HALL
JAZZ
Remote control
ROCK
1
2
3
4
ENTERTAIN
MUSIC
TV THTR
MOVIE
5
6
7
8
THX
STANDARD
9
0
EXTD. SUR
+10
AUDIO
ENT.
Remote control
Direct Stereo
Notes
• Select NIGHT:CINEMA when watching films to
reduce the dynamic range of film soundtracks and
make dialog easier to hear at lower volumes.
• Select NIGHT:MUSIC when listening to music sources
to preserve ease-of-listening for all sounds.
• Select OFF if you do not want to use this function.
Press l / h to adjust the effect level while
NIGHT:CINEMA or NIGHT:MUSIC is displayed.
This adjusts the level of compression.
• To avoid unexpected noise, do not play DTS-encoded CDs in
this mode.
• When multi-channel signals (Dolby Digital and DTS) are input,
this unit automatically selects an analog signal input. (When
DTS is selected as an input mode, no sound will be heard.)
• No sound will be output from the subwoofer.
• TONE CONTROL (page 35) and SET MENU (page 53)
settings are not effective.
ENTER
Remote control
Effect.Lvl:MID
• Select “MIN” for minimum compression.
• Select “MID” for standard compression.
• Select “MAX” for maximum compression.
y
NIGHT:CINEMA and NIGHT:MUSIC adjustments are stored
independently.
Notes
• You cannot use the night listening modes with PURE DIRECT,
MULTI CH INPUT, or when headphones are connected (even
though the NIGHT indicator lights up when PURE DIRECT is
selected).
• The night listening modes may vary in effectiveness depending
on the input source and surround sound settings you use.
38
01EN00_HTR5890U.book Page 39 Thursday, December 23, 2004 12:39 PM
PLAYBACK
■ Downmixing to 2 channels
You can enjoy 2-channel stereo playback from multichannel sources.
Rotate PROGRAM (or press STEREO on the
remote control) to select 2ch Stereo.
PROGRAM
or
Front panel
■ Playing video sources in the
background
You can combine images from a video source with sound
from an audio source. For example, you can enjoy
listening to classical music while having beautiful scenery
from the video source on the video monitor.
ROCK
STEREO
HALL
JAZZ
1
2
3
4
ENTERTAIN
MUSIC
TV THTR
MOVIE
5
6
7
8
THX
STANDARD
9
0
Use the input selector buttons to select a video
source, then select an audio source.
EXTD. SUR
+10
ENT.
Audio sources
Remote control
2ch Stereo
PHONO
TUNER
CD
MULTI CH IN
V-AUX
CBL/SAT
MD/TAPE
CD-R
DTV
VCR 1
DVR/VCR2
DVD
Video sources
Note
You can use a subwoofer with this program when “SWFR” or
“BOTH” is selected in LFE/BASS OUT.
■ Listening to unprocessed input signals
If you want to enjoy an audio source connected to the MULTI CH
INPUT jacks together with a video source, first select the video
source and then press MULTI CH INPUT.
Press STRAIGHT/EFFECT to select STRAIGHT.
STRAIGHT
STRAIGHT
or
EFFECT
EFFECT
Front panel
Remote control
Press STRAIGHT/EFFECT again so that “STRAIGHT”
disappears from the display when you want to turn the
sound effect back on.
■ Virtual CINEMA DSP
Virtual CINEMA DSP allows you to enjoy the CINEMA
DSP programs without surround speakers. It creates
virtual speakers to reproduce a natural sound field.
If you set SURR L/R SP to “NONE”, Virtual CINEMA
DSP activates automatically whenever you select a
CINEMA DSP sound field program.
Note
Virtual CINEMA DSP will not activate, even when SURR L/R
SP is set to “NONE” (see page 56) in the following cases:
– When MULTI CH INPUT is selected as the input source.
– When headphones are connected to the PHONES jack.
39
BASIC
OPERATION
In STRAIGHT mode, two channel stereo sources are
output from only the front left and right speakers. Multichannel sources are decoded straight into the appropriate
channels without any additional effect processing.
Note
01EN00_HTR5890U.book Page 40 Thursday, December 23, 2004 12:39 PM
PLAYBACK
■ Displaying information about the input
source
Selecting input modes
You can display the type, format and sampling frequency
of the current input signal.
This unit comes with a variety of input jacks. Do the
following to select the type of input signal you want to
use.
1
1
Select the input source.
INPUT
or
PHONO
TUNER
CD
MULTI CH IN
V-AUX
CBL/SAT
MD/TAPE
CD-R
DTV
VCR 1
DVR/VCR2
DVD
2
Front panel
2
Select the input source.
Remote control
PHONO
TUNER
CD
MULTI CH IN
V-AUX
CBL/SAT
MD/TAPE
CD-R
DTV
VCR 1
DVR/VCR2
DVD
Set AMP/SOURCE/TV to AMP, then press
STRAIGHT/EFFECT so that “STRAIGHT”
appears in the display.
Press INPUT MODE to select an input mode.
In most cases, use AUTO.
AMP
STRAIGHT
SOURCE
then
TRANSMIT
or
Front panel
V–AUX
DVR/VCR2
POWER
POWER
TV
AV
STANDBY
POWER
A
B
INPUT MODE
SLEEP
PHONO
TUNER
CD
MULTI CH IN
Remote control
VCR 1
CBL/SAT
DTV
DVD
MD/TAPE
CD–R
SP
A
DVD AUTO
CD
TUNER
DTS
ANALOG
*
3
Press k / n to display the following
information about the input signal.
ENTER
PHONO
dB
VOLUME
L
R
Input mode
AUTO
Automatically selects input signals in
the following order:
1) Digital signals*
2) Analog signals
Selects only digital signals encoded in
DTS. If no DTS signals are input, no
sound is output.
Selects only analog signals. If no
analog signals are input, no sound is
output.
If this unit detects a Dolby Digital or DTS signal, the
decoder automatically switches to the appropriate sound
field program.
(Format)
in
fs
rate
flg
y
• You can adjust the default input mode this unit selects when the
power is turned on (see page 61).
• DTS mode is recommended for playback of a CD or LD
encoded in DTS.
Note
If the digital output data of the player has been processed in any
way, you may not be able to perform DTS decoding even if you
make a digital connection between this unit and the player.
40
EFFECT
TV
SYSTEM
INPUT MODE
Signal format display. When the unit
cannot detect a digital signal it
automatically switches to analog input.
Number of source channels in the input
signal. For example, a multi-channel
soundtrack with 3 front channels, 2
surround channels and LFE, is
displayed as “3/2/LFE”.
Sampling frequency. When the unit is
unable to detect the sampling
frequency “Unknown” appears.
Bit rate. When the unit is unable to
detect the bit rate “Unknown” appears.
Flag data encoded with DTS or Dolby
Digital signals that cue this unit to
automatically switch decoders.
Note
The display shows “3/2/LFE” even when you play DTS-ES
Discrete 6.1 sources that include 3 surround channels.
01EN00_HTR5890U.book Page 41 Thursday, December 23, 2004 12:39 PM
TUNING
TUNING
Automatic and manual tuning
4
There are 2 tuning methods; automatic and manual.
Automatic tuning is effective when station signals are
strong and there is no interference.
Press PRESET/TUNING l / h once to begin
automatic tuning.
Press h to tune into a higher frequency, or press l
to tune into a lower frequency.
VCR 1
■ Automatic tuning
CBL/SAT
DTV
DVD
MD/TAPE
CD–R
PRESET/TUNING
CD
TU
AUTO
TUNED
SP
A
A~~AM~1530 kHz
When tuned into a station, the TUNED indicator
lights up and the frequency of the received station is
shown in the front panel display.
VOLUME
PURE DIRECT
STANDBY
/ON
PRESET/TUNING
OPTIMIZER
MIC
FM/AM
A/B/C/D/E
PRESET/TUNING
EDIT
PROGRAM
PHONES
MEMORY
TUNING MODE
MAN'L/AUTO FM
AUTO/MAN'L MONO
INPUT
SPEAKERS
A
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
■ Manual tuning
MULTI CH
INPUT
EFFECT
S VIDEO
SILENT CINEMA
32
L
AUDIO
R
OPTICAL
If the signal from the station you want to select is weak,
you must tune into it manually. Manually tuning into an
FM station will automatically change the reception mode
to monaural to increase the signal quality.
3
Rotate INPUT to select TUNER as the input
source.
1
Select TUNER and the reception band
following steps 1 and 2 as described in
“Automatic tuning”.
2
Press TUNING MODE (AUTO/MAN’L MONO)
so that the AUTO indicator disappears from
the front panel display.
INPUT
Front panel
AUTO
TUNING MODE
2
Press FM/AM to select the reception band.
“FM” or “AM” appears in the front panel display.
Disappears
AUTO/MAN'L MONO
If a colon (:) appears in the front panel display, this
unit is in PRESET mode and tuning is not possible.
Press PRESET/TUNING (EDIT) to turn it off.
FM/AM
or
3
Press TUNING MODE (AUTO/MAN’L MONO)
so that the AUTO indicator lights up in the
front panel display.
VCR 1
PRESET/TUNING
EDIT
3
Lights up
AUTO/MAN'L MONO
If a colon (:) appears in the front panel display, this
unit is in PRESET mode and tuning is not possible.
Press PRESET/TUNING (EDIT) to turn it off.
VCR 1
EDIT
CBL/SAT
DTV
DVD
MD/TAPE
CD–R
CD
TU
SP
A
A~~AM~1440 kHz
AUTO
TUNING MODE
PRESET/TUNING
BASIC
OPERATION
1
4 1
VIDEO
CBL/SAT
SP
A
DTV
DVD
MD/TAPE
CD–R
CD
Press PRESET/TUNING l / h to tune into
the desired station manually.
Hold down the button to
continue searching.
PRESET/TUNING
TU
AUTO
A~~AM~1440 kHz
41
01EN00_HTR5890U.book Page 42 Thursday, December 23, 2004 12:39 PM
TUNING
Notes
Presetting stations
■ Automatically presetting FM stations
You can use the automatic preset tuning feature to store
FM stations. This function enables this unit to
automatically tune into FM stations with strong signals,
and to store up to 40 (8 stations in 5 groups, A1 through
E8) of those stations in order. You can then recall any
preset station easily by selecting the preset station number.
Automatic preset tuning options
VOLUME
You can select the preset number from which this unit will
store FM stations and/or begin tuning toward lower
frequencies.
After pressing MEMORY in step 3:
1 Press A/B/C/D/E, then PRESET/TUNING l / h to
select the preset number under which the first station
will be stored. Automatic preset tuning will stop when
stations have all been stored up to E8.
2 Press PRESET/TUNING (EDIT) to turn off the colon
(:) and then press PRESET/TUNING l to begin
tuning toward lower frequencies.
PURE DIRECT
STANDBY
/ON
PRESET/TUNING
OPTIMIZER
MIC
FM/AM
A/B/C/D/E
PRESET/TUNING
EDIT
PROGRAM
PHONES
MEMORY
TUNING MODE
MAN'L/AUTO FM
AUTO/MAN'L MONO
INPUT
SPEAKERS
A
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
EFFECT
S VIDEO
SILENT CINEMA
1
1
VIDEO
L
AUDIO
R
OPTICAL
3 2
Press FM/AM to select the FM band.
FM/AM
2
Press TUNING MODE (AUTO/MAN’L MONO)
so that the AUTO indicator lights up in the
front panel display.
TUNING MODE
AUTO
Lights up
AUTO/MAN'L MONO
3
Press and hold MEMORY (MAN’L/AUTO FM)
for more than 3 seconds.
The preset number, the MEMORY and AUTO
indicators flash. After about 5 seconds, automatic
presetting starts from the frequency currently
displayed and proceeds toward the higher
frequencies.
MEMORY
MAN'L/AUTO FM
V–AUX
DVR/VCR2
VCR 1
CBL/SAT
SP
A
DTV
DVD
MD/TAPE
CD–R
CD
TUNER
AUTO
MEMORY
A1:FM 87.5 MHz
PHONO
dB
VOLUME
L
R
When automatic preset tuning is completed, the front
panel display shows the frequency of the last preset
station.
42
• Any stored station data existing under a preset number is
cleared when you store a new station under that preset number.
• If the number of the received stations does not reach 40 (E8),
automatic preset tuning has automatically stopped after
searching all stations.
• Only FM stations with sufficient signal strength are stored
automatically by automatic preset tuning. If the station you
want to store is weak in signal strength, tune into it manually
and store it by following the procedure in “Manually presetting
stations”.
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is set in the standby
mode, the power cord is disconnected from the AC
outlet, or the power supply is temporarily cut due to
power failure. However, if the power is cut for more
than one week, the preset stations may be cleared. If
so, store the stations again by using the presetting
station methods.
01EN00_HTR5890U.book Page 43 Thursday, December 23, 2004 12:39 PM
TUNING
■ Manually presetting stations
You can also store up to 40 FM or AM stations (8 stations
in 5 groups, A1 through E8) manually.
4
VOLUME
PURE DIRECT
Press PRESET/TUNING l / h to select a
preset station number (1 through 8) while the
MEMORY indicator is flashing.
Press h to select a higher preset station number.
Press l to select a lower preset station number.
STANDBY
/ON
PRESET/TUNING
PRESET/TUNING
OPTIMIZER
MIC
FM/AM
A/B/C/D/E
PRESET/TUNING
EDIT
PROGRAM
PHONES
MEMORY
TUNING MODE
MAN'L/AUTO FM
AUTO/MAN'L MONO
INPUT
SPEAKERS
A
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
EFFECT
S VIDEO
SILENT CINEMA
VIDEO
L
AUDIO
R
OPTICAL
3 4 2,5
1
V–AUX
CBL/SAT
DTV
Tune into a station.
See page 41 for tuning instructions.
DVR/VCR2
VCR 1
CBL/SAT
DTV
DVD
MD/TAPE
CD–R
CD
TUNER
TUNED
A :AM
630 kHz
PHONO
5
dB
VOLUME
L
R
Press MEMORY (MAN’L/AUTO FM).
The MEMORY indicator flashes for about 5 seconds.
V–AUX
DVR/VCR2
VCR 1
CBL/SAT
DTV
C3:AM
MEMORY
MAN'L/AUTO FM
Press A/B/C/D/E repeatedly to select a preset
station group (A through E) while the
MEMORY indicator is flashing.
The group letter appears. Check that the colon (:)
appears in the front panel display.
A/B/C/D/E
CBL/SAT
DTV
C :AM
DVD
MD/TAPE
CD–R
CD
TUNER
MEMORY TUNED
630 kHz
TUNER
630 kHz
PHONO
dB
VOLUME
L
R
DVD
MD/TAPE
CD–R
CD
TUNER
TUNED
630 kHz
PHONO
dB
VOLUME
L
R
Shows the displayed station has been stored as C3.
Flashes
SP
A
CD
MEMORY TUNED
SP
A
VCR 1
CD–R
Press MEMORY (MAN’L/AUTO FM) on the
front panel while the MEMORY indicator is
flashing.
The station band and
MEMORY
frequency appear in the front
MAN'L/AUTO FM
panel display with the preset
group and number you have
selected.
MEMORY
DVR/VCR2
MD/TAPE
6
Repeat steps 1 through 5 to store other
stations.
Notes
• Any stored station data existing under a preset number is
cleared when you store a new station under that preset number.
• The reception mode (stereo or monaural) is stored along with
the station frequency.
PHONO
dB
VOLUME
L
R
43
BASIC
OPERATION
When tuned into a station, the front panel display
shows the frequency of the station received.
V–AUX
DVD
SP
A
SP
A
3
VCR 1
C3:AM
V–AUX
2
DVR/VCR2
01EN00_HTR5890U.book Page 44 Thursday, December 23, 2004 12:39 PM
TUNING
Selecting preset stations
Exchanging preset stations
You can tune any desired station simply by selecting the
preset station number under which it was stored.
You can exchange the assignment of two preset stations
with each other. The example below describes the
procedure for exchanging preset station “E1” with “A5”.
VOLUME
PURE DIRECT
VOLUME
STANDBY
/ON
PURE DIRECT
PRESET/TUNING
FM/AM
A/B/C/D/E
PRESET/TUNING
MEMORY
TUNING MODE
STANDBY
/ON
OPTIMIZER
MIC
EDIT
MAN'L/AUTO FM
PROGRAM
PHONES
AUTO/MAN'L MONO
INPUT
PRESET/TUNING
SPEAKERS
A
FM/AM
A/B/C/D/E
PRESET/TUNING
MEMORY
TUNING MODE
MAN'L/AUTO FM
AUTO/MAN'L MONO
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
OPTIMIZER
MIC
EDIT
PROGRAM
EFFECT
S VIDEO
SILENT CINEMA
VIDEO
L
AUDIO
R
INPUT
OPTICAL
PHONES
SPEAKERS
A
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
EFFECT
S VIDEO
SILENT CINEMA
VIDEO
L
AUDIO
R
OPTICAL
1 2
2,4
2
+
+
+
TV VOL
CH
VOL
–
–
–
SOURCE
TV
1
Select preset station “E1” using
A/B/C/D/E and PRESET/TUNING l / h.
See “Selecting preset stations”.
2
Press and hold PRESET/TUNING (EDIT) for
more than 3 seconds.
“E1” and the MEMORY indicator flash in the front
panel display.
A/B/C/D/E
TV MUTE
TV INPUT
MUTE
1
When performing this operation with the remote
control, first set AMP/SOURCE/TV to SOURCE
then press TUNER to set the remote to tuner
mode.
1
PRESET/TUNING
Press A/B/C/D/E to select the preset station
group.
The preset group letter appears in the front panel
display and changes each time you press the button.
A/B/C/D/E
A/B/C/D/E
or
CR2
CBL/SAT
DTV
DVD
MD/TAPE
CD–R
SP
A
3
Remote control
Press PRESET/TUNING l / h (PRESET +/–
on the remote control) to select a preset
station number (1 through 8).
The preset group and number appear in the front
panel display along with the station band, frequency
and the TUNED indicator lights up.
VCR 1
EDIT
TV INPUT
Front panel
2
1,3 1,3
AMP
CD
E1:FM 87.5 MHz
Select preset station “A5” by using
A/B/C/D/E and PRESET/TUNING l / h.
“A5” and the MEMORY indicator flash in the front
panel display.
V–AUX
DVR/VCR2
VCR 1
CBL/SAT
DTV
DVD
MD/TAPE
CD–R
SP
A
CD
TUNER
MEMORY TUNED
A5:FM 90.6 MHz
4
TUNER
MEMORY TUNED
PHONO
dB
VOLUME
L
R
Press PRESET/TUNING (EDIT) again.
The stations stored at the two preset assignments are
exchanged.
PRESET
PRESET/TUNING
PRESET/TUNING
+
or
CH
EDIT
–
Front panel
Remote control
V–AUX
DVR/VCR2
VCR 1
CBL/SAT
DTV
DVD
MD/TAPE
CD–R
SP
A
VCR 1
CBL/SAT
SP
A
DTV
DVD
MD/TAPE
CD–R
CD
TUNER
TUNED
E1:FM 87.5 MHz
44
EDIT
CD
TUNER
TUNED
E1-A5
PHONO
dB
VOLUME
L
R
01EN00_HTR5890U.book Page 45 Thursday, December 23, 2004 12:39 PM
RECORDING
RECORDING
Recording adjustments and other operations are
performed from the recording components. Refer to the
operation instructions for those components.
VOLUME
PURE DIRECT
STANDBY
/ON
PRESET/TUNING
OPTIMIZER
MIC
FM/AM
A/B/C/D/E
PRESET/TUNING
EDIT
PROGRAM
PHONES
MEMORY
TUNING MODE
MAN'L/AUTO FM
AUTO/MAN'L MONO
INPUT
SPEAKERS
A
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
EFFECT
S VIDEO
SILENT CINEMA
1
VIDEO
L
AUDIO
R
OPTICAL
2
SYSTEM
2
POWER
TV
AV
A
B
STANDBY
POWER
INPUT MODE
SLEEP
PHONO
TUNER
CD
MULTI CH IN
V-AUX
CBL/SAT
MD/TAPE
CD-R
DTV
VCR 1
DVR/VCR2
DVD
1
2
Turn on the power of this unit and all
connected components.
Select the source component you want to
record from.
INPUT
PHONO
TUNER
CD
MULTI CH IN
V-AUX
CBL/SAT
MD/TAPE
CD-R
DTV
VCR 1
DVR/VCR2
DVD
or
Front panel
Remote control
3
Start playback (or select a broadcast station)
on the source component.
4
Start recording on the recording component.
If you playback a video source that uses scrambled or
encoded signals to prevent it from being dubbed, the
picture itself may be disturbed due to those signals.
■ Special considerations when recording
DTS software
The DTS signal is a digital bitstream. Attempting to
digitally record the DTS bitstream will result in noise
being recorded. Therefore, if you want to use this unit to
record sources that have DTS signals recorded on them,
the following considerations and adjustments need to be
made.
For DVDs and CDs encoded with DTS, when your player
is compatible with the DTS format, follow its operation
instruction to make a setting so that the analog signal will
be output from the player.
y
Always do a test recording before you start an actual recording.
45
BASIC
OPERATION
1
POWER
Notes
• When this unit is set in the standby mode, you cannot record
between other components connected to this unit.
• The setting of TONE CONTROL, VOLUME, SPEAKER
LEVEL (page 57) and programs does not affect recorded
material.
• A source connected to the MULTI CH INPUT jacks of this unit
cannot be recorded.
• S-video and composite video signals pass independently
through this unit’s video circuits. Therefore, when recording or
dubbing video signals, if your video source component is
connected to provide only an S-video (or only a composite
video) signal, you can record only an S-video (or only a
composite video) signal to your VCR.
• Digital signals input to the DIGITAL INPUT jacks are not
output to the analog AUDIO OUT (L/R) jacks for recording.
Likewise, analog signals input to the AUDIO IN (L/R) jacks are
not output to the DIGITAL OUTPUT jack. Therefore, if your
source component is connected to provide only digital (or
analog) signals, you can only record digital (or analog) signals.
• A given input source is not output on the same REC OUT
channel. (For example, the signal input from VCR 1 IN is not
output on VCR 1 OUT.)
• Check the copyright laws in your country to record from
records, CDs, radio, etc. Recording of copyrighted material may
infringe copyright laws.
01EN00_HTR5890U.book Page 46 Thursday, December 23, 2004 12:39 PM
SOUND FIELD PROGRAM DESCRIPTIONS
SOUND FIELD PROGRAM DESCRIPTIONS
This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from
almost any sound source (stereo or multi-channel). This unit is also equipped with a YAMAHA digital sound field
processing (DSP) chip containing several sound field programs which you can use to enhance your playback experience.
Most of these sound field programs are precise digital recreations of actual acoustic environments found in famous
concert halls, music venues, and movie theaters.
y
The YAMAHA CINEMA DSP modes are compatible with all Dolby Digital, DTS, and Dolby Surround sources. Set the input mode to
AUTO (see page 40) to enable this unit to automatically switch to the appropriate digital decoder according to the input signal.
Notes
• This unit’s DSP sound field programs are recreations of real-world acoustic environments made from precise measurements taken in
actual halls, etc. Thus you may notice variations in the strength of the reflections coming from the front, back, left and right.
• Feel free to choose a sound field program based on your listening preference, and not purely on the name of the program itself.
For movie/video sources
You can select from the following sound fields when playing movie or video sources. The sound fields marked “MULTI”
can be used with multi-channel sources, like DVD, digital TV, etc. Those marked “2-CH” can be used with 2-channel
(stereo) sources like TV programs, video tapes, etc.
Program
Features
STEREO:
2ch Stereo
Downmixes multi-channel sources to 2 (left and right) channels or plays back 2-channel
sources as is.
MUSIC VIDEO
This program lends an enthusiastic atmosphere to the sound, giving you the feeling that you
are at an actual jazz or rock concert.
ENTERTAINMENT:
Game
This program adds a deep and spatial feeling to video game sounds.
TV THEATER:
Mono Movie
This program is provided for reproducing monaural video sources (such as old movies). The
program produces the optimum reverberation to create sound depth using only the presence
sound field.
TV THEATER:
Variety/Sports
Though the presence sound field is relatively narrow, the surround sound field employs the
sound environment of a large concert hall. This effect enhances the experience of watching
various TV programs such as news, variety shows, music programs or sports programs.
MOVIE THEATER:
Spectacle
CINEMA DSP processing. This program creates the extremely wide sound field of a 70-mm
movie theater. It precisely reproduces the source sound in detail, making both the video and the
sound field incredibly real. This is ideal for any kind of video source encoded with Dolby
Surround, Dolby Digital or DTS (especially large-scale movie productions).
MOVIE THEATER:
Sci-Fi
CINEMA DSP processing. This program clearly reproduces dialog and sound effects in the
latest sound form for science fiction films, thus creating a broad and expansive cinematic space
amid silence. You can enjoy science fiction films in a virtual-space sound field that includes
Dolby Surround, Dolby Digital and DTS-encoded software employing the most advanced
techniques.
MOVIE THEATER:
Adventure
CINEMA DSP processing. This program is ideal for precisely reproducing the sound design of
the newest 70-mm and multi-channel soundtrack films. The sound field is made to be similar
to that of the newest movie theaters, so the reverberations of the sound field itself are
restrained as much as possible.
MOVIE THEATER:
General
CINEMA DSP processing. This program is for reproducing sounds from 70-mm and multichannel soundtrack films, and is characterized by soft and extensive sound field. The presence
sound field is relatively narrow. It spatially spreads all around and toward the screen,
restraining the echo effect of conversations without losing clarity.
THX:
THX Cinema
THX processing for any multi-channel source. 2-channel sources are decoded by the PRO
LOGIC, PRO LOGIC II, PRO LOGIC IIx or DTS Neo: 6 decoder before THX processing.
46
Sources
MULTI
2-CH
01EN00_HTR5890U.book Page 47 Thursday, December 23, 2004 12:39 PM
SOUND FIELD PROGRAM DESCRIPTIONS
Program
Features
THX:
THX Surr. EX
THX processing for Dolby Digital and Dolby Digital EX sources. This program is available
only when surround back L/R speakers are connected to this unit and when the input source
contains surround back channel signals.
THX:
dts ES + THX
THX processing for DTS-ES sources.
DOLBY DIGITAL:
SUR. STANDARD
Standard 5.1 channel processing for Dolby Digital sources.
DOLBY DIGITAL:
SUR. ENHANCED
CINEMA DSP enhanced processing for Dolby Digital sources.
q
D+PLIIxMovie:
SUR. STANDARD
Standard 7.1 channel processing for Dolby Digital sources.
q
D+PLIIxMovie:
SUR. ENHANCED
CINEMA DSP enhanced 7.1 channel processing for Dolby Digital sources.
DOLBY D EX:
SUR. STANDARD
Standard 6.1 channel processing for Dolby Digital sources.
DOLBY D EX:
SUR. ENHANCED
CINEMA DSP enhanced 6.1 channel processing (Dolby Digital EX) for Dolby Digital
sources.
DTS:
SUR. STANDARD
Standard 5.1 channel processing for DTS sources.
DTS:
SUR. ENHANCED
CINEMA DSP enhanced processing for DTS and 96kHz/24-bit DTS sources.
DTS 96/24:
SUR. STANDARD
Standard 5.1 channel processing for 96kHz/24-bit DTS sources.
DTS+PLIIx Movie:
SUR. STANDARD
Standard 7.1 channel processing (Dolby Pro Logic IIx) for DTS sources.
DTS+PLIIx Movie:
SUR. ENHANCED
CINEMA DSP enhanced 7.1 channel processing (Dolby Pro Logic IIx) for DTS sources.
DTS+DOLBY EX:
SUR. STANDARD
Standard 6.1 channel processing (Dolby Digital EX) for DTS sources.
DTS+DOLBY EX:
SUR. ENHANCED
CINEMA DSP enhanced 6.1 channel processing (Dolby Digital EX) for DTS sources.
DTS ES Mtrx6.1:
SUR. STANDARD
Standard 6.1 channel processing (DTS-ES Matrix) for DTS sources.
DTS ES Mtrx6.1:
SUR. ENHANCED
CINEMA DSP enhanced processing (DTS-ES Matrix) for DTS and 96kHz/24-bit DTS
sources.
DTS ES Disc6.1:
SUR. STANDARD
Standard 6.1 channel processing (DTS-ES Discrete) for DTS sources.
DTS ES Disc6.1:
SUR. ENHANCED
CINEMA DSP enhanced processing (DTS-ES Discrete) for DTS sources.
DTS 96/24 ES:
SUR. STANDARD
Standard 6.1 channel processing (DTS-ES Matrix) for 96kHz/24-bit DTS sources.
Sources
MULTI
SOUND FIELD
PROGRAMS
47
01EN00_HTR5890U.book Page 48 Thursday, December 23, 2004 12:39 PM
SOUND FIELD PROGRAM DESCRIPTIONS
Program
Features
PRO LOGIC:
SUR. STANDARD
Standard processing for Dolby Surround sources.
PRO LOGIC:
SUR. ENHANCED
CINEMA DSP enhanced precessing for Dolby Surround sources.
PRO LOGIC IIx:
PLIIx Movie
Dolby Pro Logic IIx processing for movie software.*
PRO LOGIC II:
PLII Movie
Dolby Pro Logic II processing for movie software.*
PRO LOGIC IIx:
PLIIx Game
Dolby Pro Logic IIx processing for game software.*
PRO LOGIC II:
PLII Game
Dolby Pro Logic II processing for game software.*
DTS:
Neo:6 Cinema
DTS processing for movie software.
* You can select either Pro Logic IIx or Pro
48
Logic II processing using the PLII/PLIIx parameter on page 85.
Sources
2-CH
01EN00_HTR5890U.book Page 49 Thursday, December 23, 2004 12:39 PM
SOUND FIELD PROGRAM DESCRIPTIONS
For music sources
You can select from the following sound fields when playing music sources, like CD, FM/AM broadcasting, tapes, etc.
Program
Features
HiFi DSP processing. A classic shoe-box type concert hall with approximately 1700 seats.
Pillars and ornate carvings create extremely complex reflections which produce a very full,
rich sound.
JAZZ CLUB
HiFi DSP processing. This is the sound field at stage front in “The Bottom Line”, a famous
New York jazz club. The floor can seat 300 people to the left and right in a sound field offering
a real and vibrant sound.
ROCK CONCERT
HiFi DSP processing. The ideal program for lively, dynamic rock music. The data for this
program was recorded at LA’s “hottest” rock venue. The listener’s virtual seat is at the centerleft of the hall.
ENTERTAINMENT:
Disco
HiFi DSP processing. This program recreates the acoustic environment of a lively disco in the
heart of a big city. The sound is dense and highly concentrated. It is also characterized by a
high-energy, “immediate” sound.
q
D+PLIIxMusic:
SUR. STANDARD
Standard Dolby Digital and Dolby Pro Logic IIx processing for music sources.
q
D+PLIIxMusic:
SUR. ENHANCED
DSP enhanced Dolby Digital and Dolby Pro Logic IIx processing for music sources.
DTS+PLIIx Music:
SUR. STANDARD
Standard DTS and Dolby Pro Logic IIx processing for music sources.
DTS+PLIIx Music:
SUR. ENHANCED
DSP enhanced DTS and Dolby Pro Logic IIx processing for music sources.
STEREO:
2ch Stereo
2 (left and right) channel playback.
STEREO:
Direct Stereo
Use to output stereo sources to only the front left and right speakers without any processing.
STEREO:
7ch Stereo
Use to increase the output stereo sources (in stereo) from all speakers. This provides a larger
sound field and is ideal for background music at parties, etc.
PRO LOGIC IIx:
PLIIx Music
Dolby Pro Logic IIx processing for music software.*
PRO LOGIC II:
PLII Music
Dolby Pro Logic II processing for music software.*
DTS:
Neo:6 Music
DTS processing for music software.
* You can select either Pro Logic IIx or Pro
MULTI
2-CH
MULTI
SOUND FIELD
PROGRAMS
CONCERT HALL
Sources
2-CH
Logic II processing using the PLII/PLIIx parameter on page 85.
49
01EN00_HTR5890U.book Page 50 Thursday, December 23, 2004 12:39 PM
ADVANCED OPERATIONS
ADVANCED OPERATIONS
Selecting the OSD mode
Using the sleep timer
You can display this unit’s operating information on a
video monitor. If you display the SET MENU and sound
field program parameter settings on a monitor, it is much
easier to see the available options and parameters than it is
by reading this information in the front panel display.
1
Turn on the video monitor connected to this
unit.
2
Press ON SCREEN repeatedly to change the
OSD mode.
The OSD mode changes in the
following order: full display, short
DISPLAY
display, and display off.
Use this feature to automatically set this unit in the
standby mode after a certain amount of time. The sleep
timer is useful when you are going to sleep while this unit
is playing or recording a source. The sleep timer also
automatically turns off any external components
connected to the AC OUTLETS.
■ Setting the sleep timer
TRANSMIT
SYSTEM
POWER
POWER
TV
AV
A
B
INPUT MODE
STANDBY
POWER
SLEEP
PHONO
TUNER
CD
MULTI CH IN
V-AUX
CBL/SAT
MD/TAPE
CD-R
DTV
VCR 1
DVR/VCR2
DVD
2
ON SCREEN
SELECT
Full display
Always shows the sound field program parameter
settings as well as the contents of the front panel
display.
Short display
Briefly shows the contents of the front panel display
at the bottom of the screen each time you operate this
unit.
Display off
Only operations performed using ON SCREEN are
displayed. The OSD is displayed when using SET
MENU or the test tone feature, even if the OSD mode
is set to “Display off”.
P08
1
Select a source and start playback on the
source component.
2
Press SLEEP repeatedly to
set the amount of time.
Each time you press SLEEP, the front
panel display changes as shown
below. The SLEEP indicator flashes
while switching the amount of time for
the sleep timer.
SLEEP 120 min.
SLEEP OFF
Sci-Fi
.DSPLEVEL;;;;0dB
P.INITDLY;;16ms
P.ROOMSIZE;;1.0
S.INITDLY;;20ms
S.ROOMSIZE;;1.0
V–AUX
Short display
Notes
SLEEP
SLEEP 30 min. SLEEP 60 min.
VCR 1
CBL/SAT
DTV
DVD
MD/TAPE
CD–R
CD
TUNER
PHONO
dB
VOLUME
SLEEP
120min
L
R
The SLEEP indicator lights up in the front panel
display, and the display returns to the selected sound
field program.
V–AUX
• The OSD signal is not output to the REC OUT jack, and will
not be recorded.
• When the component video signals are input, short display is
not output to the COMPONENT VIDEO MONITOR OUT
jacks.
• You can set the OSD to turn on (gray background) or off when a
video source is not being reproduced (or the source component
is turned off) by using DISPLAY SET (see page 62).
50
SLEEP 90 min.
SP
A
P08MOVIE THEATER
Sci-Fi
Full display
DVR/VCR2
SLEEP
DVR/VCR2
VCR 1
CBL/SAT
DTV
DVD
MD/TAPE
CD–R
CD
SP
A
SLEEP
CONCERT HALL
TUNER
PHONO
dB
VOLUME
L
R
01EN00_HTR5890U.book Page 51 Thursday, December 23, 2004 12:39 PM
ADVANCED OPERATIONS
■ Canceling the sleep timer
Press SLEEP repeatedly until “SLEEP OFF” appears in
the front panel display.
After a few seconds, “SLEEP OFF” disappears, and the
SLEEP indicator goes off.
SLEEP
y
The sleep timer setting can also be canceled by pressing
STANDBY on the remote control (or STANDBY/ON on the front
panel) to set this unit to the standby mode.
Manually adjusting speaker levels
You can adjust the output level of each speaker while
listening to a music source. This is also possible when
playing sources through the MULTI CH INPUT jacks.
Please note that this operation will override the level
adjustments made in “AUTO SETUP” (page 26),
“Speaker level” (page 57) and “Using the test tone”
(page 52).
AMP
+
+
+
TV VOL
CH
VOL
SOURCE
–
–
–
TV
1
A/B/C/D/E
TV MUTE
2
TV INPUT
MUTE
LEVEL
SET MENU
TITLE
MENU
PURE DIRECT
NIGHT
AUDIO
ENTER
TEST
ON SCREEN
RETURN
DISPLAY
STRAIGHT
EFFECT
3
1
Set AMP/SOURCE/TV to AMP.
2
Press LEVEL repeatedly to select the
speaker you want to adjust.
FRONT L
CENTER
FRONT R
SUR.R
SUR.B.R
SUR.B.L
SUR.L
SWFR
PRES
Front left speaker level
Center speaker level
Front right speaker level
Surround right speaker level
Surround back right speaker level
Surround back left speaker level
Surround left speaker level
Subwoofer level
Presence speaker level
y
Once you press LEVEL, you can also select the speaker by
pressing k / n.
ADVANCED
OPERATION
3
Press l / h to adjust the speaker output
level.
The control range is from +10 dB to –10 dB.
51
01EN00_HTR5890U.book Page 52 Thursday, December 23, 2004 12:39 PM
ADVANCED OPERATIONS
Using the test tone
6
You can use the test tone feature to manually balance your
speaker levels. Please note that this operation will override
the level adjustments made in “AUTO SETUP” (page 26),
“Speaker level” (page 57) and “Manually adjusting
speaker levels” (page 51). Use the test tone to set speaker
levels so that the volume from each speaker is identical
when heard from your listening position.
TEST
TEST
TEST
TEST
+
+
CH
VOL
SOURCE
–
–
–
TV
1
A/B/C/D/E
TV MUTE
MUTE
LEVEL
SET MENU
TITLE
MENU
4,7
2,5,8
TV INPUT
PURE DIRECT
NIGHT
AUDIO
ENTER
TEST
ON SCREEN
RETURN
DISPLAY
STRAIGHT
3,6
EFFECT
1
Set AMP/SOURCE/TV to AMP.
2
Press TEST.
The unit outputs a test tone.
3
Press k / n repeatedly to select the speaker
you want to adjust.
TEST
TEST
TEST
TEST
TEST
TEST
TEST
TEST
LEFT
CENTER
RIGHT
SUR. R
SUR. B. R
SUR. B. L
SUR. L
SUBWOOFER
Front left speaker
Center speaker
Front right speaker
Surround right speaker
Surround back right speaker
Surround back left speaker
Surround left speaker
Subwoofer
4
Press l / h to adjust speaker volumes.
5
Press TEST when you have completed your
adjustment.
If PRESENCE SP in SPEAKER SET is set to “YES”
(see page 56), proceed to step 6 to adjust the presence
speaker volumes.
If PRESENCE SP in SPEAKER SET is set to
“NONE”, the test tone stops.
52
Front speakers
Presence speakers
Presence left speaker
Presence right speaker
Press l / h to adjust the presence speaker
volumes.
8
Press TEST when you have completed your
adjustment.
The test tone stops.
AMP
+
TV VOL
FRONT
PRESENCE
PRES L
PRES R
7
Note
You cannot activate the test tone if headphones are connected to
the PHONES jack. Remove the headphones from the PHONES
jack.
Press k / n repeatedly to select the
speaker(s) you want to output the test tone.
y
• If you use a handheld SPL meter, hold at arms length and point
upwards so that the meter is in the listening position. With the
meter set to the 70 dB scale and to C SLOW, calibrate each
speaker to 75 dB.
• Before outputting the test tone, we recommend that you set the
output volume to 0 dB.
01EN00_HTR5890U.book Page 53 Thursday, December 23, 2004 12:39 PM
SET MENU
SET MENU
You can use the following parameters in SET MENU to adjust a variety of system settings and customize the way this
unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening
environment.
■ AUTO SETUP
Use to specify which speaker parameters auto setup will adjust, and to activate the auto setup procedure (see page 26).
■ MANUAL SETUP
Use to manually adjust speaker and system settings.
BASIC MENU
Use to quickly setup basic system parameters (see page 31).
SOUND MENU
Use to manually adjust any speaker setting, alter the quality and tone of the sound output by the system or compensate for
video signal processing delays when using LCD monitors or projectors.
y
Most of the parameters described in SOUND MENU are set automatically when you run auto setup (see page 26). You can use SOUND
MENU to make further adjustments, but we recommend running auto setup first.
Item
Features
Page
Selects the size of each speaker, the speakers for low-frequency signal output, and the cross over
frequency.
55
B)SPEAKER LEVEL
Adjusts the output level of each speaker.
57
C)SP DISTANCE
Adjusts the delay time of each speaker.
57
D)GRAPHIC EQ
Adjusts the tonal quality of each speaker.
58
E)LFE LEVEL
Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.
58
F)DYNAMIC RANGE
Adjusts the dynamic range for Dolby Digital or DTS signals.
58
G)LOW FRQ. TEST
Matches the subwoofer level with the level of the other speakers.
59
H)HP TONE CTRL
Adjusts the tonal balance of the headphones.
59
I)AUDIO SET
Customizes overall audio settings of this unit.
59
Selects priority to either surround back or presence speakers when both sets of speakers are
ADVANCED
OPERATION
A)SPEAKER SET
60
J)PR/SBch SELECT connected to this unit.
INPUT MENU
Use to reassign digital input/outputs, select the input mode, rename your inputs, or specify external input settings.
Item
Features
A)I/O ASSIGNMENT Assigns jacks according to the component to be used.
Page
60
B)INPUT MODE
Selects the initial input mode of the source.
61
C)INPUT RENAME
Changes the name of the inputs.
61
Sets the direction of the signals input into the center, subwoofer and surround channels for the
D)MULTI CH INPUT source component connected to the MULTI CH INPUT jacks.
62
53
01EN00_HTR5890U.book Page 54 Thursday, December 23, 2004 12:39 PM
SET MENU
OPTION MENU
Use to adjust the optional system settings.
Item
Features
Page
A)DISPLAY SET
Adjusts the settings of the OSD and the front panel display and converts video signals.
62
B)MEMORY GUARD
Locks sound field program parameters and other SET MENU settings.
63
C)PARAM. INI
Initializes the parameters of a group of sound field programs.
63
D)SP IMP. SET
Selects the impedance of your speakers.
63
E)ZONE SET
Specifies the location of the speakers connected to the SPEAKERS B terminals.
64
F)ZONE2 SET
Selects the Zone 2 mode.
64
G)ZONE3 SET
Selects the Zone 3 mode.
64
Using SET MENU
1
Use the remote control to access and adjust each
parameter.
Set AMP/SOURCE/TV to AMP, then press
SET MENU to enter the SET MENU.
AMP
SET MENU
then
SOURCE
AMP
+
+
+
TV VOL
CH
VOL
SOURCE
–
–
–
TV
1
A/B/C/D/E
TV MUTE
TV INPUT
MUTE
LEVEL
SET MENU
TITLE
MENU
2,3,4
PURE DIRECT
NIGHT
AUDIO
ENTER
TEST
ON SCREEN
RETURN
DISPLAY
STRAIGHT
2,3,5
2
EFFECT
STEREO
5
HALL
JAZZ
MENU
TV
ROCK
1
2
3
4
ENTERTAIN
MUSIC
TV THTR
MOVIE
5
6
7
8
THX
SURROUND
9
0
Press k / n to select AUTO SETUP or
MANUAL SETUP, then press l / h to enter
the selected category.
SUR. BACK
+10
ENT.
y
You can change SET MENU parameters while the unit is
reproducing sound.
then
ENTER
ENTER
Note
You cannot change some SET MENU parameters while the unit
is in either cinema or music night listening mode.
SET MENU
. ;AUTO SETUP
;MANUAL SETUP
p
p
/
: Up/Down
< / > : Enter
Note
If k is pressed when AUTO SETUP is selected, or if n is
pressed when MANUAL SETUP is selected, SET MENU
will be closed. Press SET MENU to open SET MENU
again.
3
54
Press k / n repeatedly to select a menu,
then press l / h to enter the menu item.
Repeat this operation to navigate to and enter the
setup mode of the item you want to adjust.
01EN00_HTR5890U.book Page 55 Thursday, December 23, 2004 12:39 PM
SET MENU
4
5
Press l / h repeatedly to change the setting
of the item you want to adjust.
To exit, press k / n repeatedly until the menu
disappears or just press one of the sound
field program group buttons.
Using SOUND MENU
Use to manually adjust any speaker setting or compensate
for video signal processing delays when using LCD
monitors or projectors. Most of the SOUND parameters
are set automatically when you run auto setup (see
page 26).
2 SOUND MENU 1/3
ENTER
or
HALL
JAZZ
ROCK
1
2
3
4
ENTERTAIN
MUSIC
TY THTR
MOVIE
5
6
7
THX
STANDARD
9
0
8
EXTD. SUR
+10
ENT.
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is in the standby mode.
However, if the power cord is disconnected from the
AC outlet, or the power supply is cut for more than one
week, the stored data will be lost. If so, adjust the
items again.
. A)SPEAKERSET
B)SPEAKERLEVEL
C)SPDISTANCE
D)GRAPHICEQ
/p
: Up/Down
< / > : Enter
p
STEREO
■ Speaker set A)SPEAKER SET
Use to manually adjust any speaker setting.
y
If you are not satisfied with the bass sounds from your speakers,
you can change these settings according to your preference.
Note
Set any THX speakers to SMALL (SML).
Center speaker CENTER SP
Choices: NONE, SML, LRG
CENTER SP
NONE [SML
LRG
Front speakers FRONT SP
Choices: SMALL, LARGE
FRONT SP
[SMALL
LARGE
• Select “SMALL” if you have small front speakers. The
unit directs the low-frequency signals of the front
channel to the speakers selected in LFE/BASS OUT.
• Select “LARGE” if you have large front speakers. The
unit directs the entire range of the front left and right
channel signals to the front left and right speakers.
55
ADVANCED
OPERATION
• Select “NONE” if you do not have a center speaker.
The unit directs all of the center channel signal to the
front left and right speakers.
• Select “SML” if you have a small center speaker. The
unit directs the low-frequency signals of the center
channel to the speakers selected in LFE/BASS OUT.
• Select “LRG” if you have a large center speaker. The
unit directs the entire range of the center channel signal
to the center speaker.
01EN00_HTR5890U.book Page 56 Thursday, December 23, 2004 12:39 PM
SET MENU
Surround left/right speakers
Choices: NONE, SML, LRG
SURR L/R SP
SURR L/R SP
NONE [SML
LRG
• Select “NONE” if you do not have surround speakers.
This will set the unit to the Virtual CINEMA DSP
mode (see page 39) and automatically set the surround
back speaker setting (SURR B L/R SP) to “NONE”.
• Select “SML” if you have small surround left and right
speakers. The low-frequency signals of the surround
channel are directed to the speakers selected in LFE/
BASS OUT.
• Select “LRG” if you have large surround left and right
speakers or if a rear subwoofer is connected to the
surround speakers. The entire range of the surround
channel signal is directed to the surround left and right
speakers.
Surround back speakers SURR B L/R SP
Choices: LRGx2, LRGx1, SMLx2, SMLx1, NONE
SURR B L/R SP
SMLx1 [SMLx2
• Select “LRGx2” if you have 2 large surround back
speakers. The unit directs the entire range of the
surround back channel signal to the surround back
speakers.
• Select “LRGx1” if you have a large surround back
speaker. The unit directs the entire range of the
surround back channel signal to the left surround back
speaker.
• Select “SMLx2” if you have 2 small surround back
speakers. The low-frequency signals of the surround
back channels are directed to the speakers selected in
LFE/BASS OUT.
• Select “SMLx1” if you have a small surround back
speaker. The low-frequency signals of the surround
back channel are directed to the speakers selected in
LFE/BASS OUT, and the rest of the frequency signals
are directed to the left surround back speaker.
• Select “NONE” if you do not have a surround back
speaker. The unit directs all of the surround back
channel signal to the surround left and right speakers.
Note
If you select “LRGx1” or “SMLx1”, connect the speaker to the
left SURROUND BACK speaker terminals.
56
Presence speakers
Choices: NONE, YES
PRESENCE SP
PRESENCE SP
[NONE
YES
• Select “YES” if you have presence speakers.
• Select “NONE” if you do not have presence speakers.
LFE/bass out LFE/BASS OUT
Low-frequency (bass) signals can be directed to the
subwoofer and/or the front left and right speakers
according to the characteristics of your system. This
setting also determines the routing of the LFE (lowfrequency effect) signals found in Dolby Digital or DTS
sources.
Choices: SWFR (subwoofer), FRNT, BOTH
THX recommendation: SWFR
LFE/BASS OUT
[SWFR FRNT BOTH
• Select “SWFR” if you connect a subwoofer. LFE and
low-frequency signals from other channels are directed
to the subwoofer according to the speaker settings.
• Select “FRNT” if you do not use a subwoofer. LFE and
low frequency signals from other channels are directed
to the front speakers according to the speaker settings
(even if you have previously set front speakers to
SML).
• Select “BOTH” if you connect a subwoofer and you
want to output low-frequency signals from front
channels to both the front speakers and subwoofer.
LFE and low-frequency signals from other channels
are also directed to the subwoofer according to the
speaker settings. Use this function to reinforce lowfrequency signals using the subwoofer when playing
back sources such as CDs.
01EN00_HTR5890U.book Page 57 Thursday, December 23, 2004 12:39 PM
SET MENU
Cross over CROSS OVER
Use this feature to select a cross-over (cut-off) frequency
for all low-frequency signals. All frequencies below the
selected frequency will be sent to the subwoofer.
Choices: 40Hz, 60Hz, 80Hz (THX), 90Hz, 100Hz,
110Hz, 120Hz, 160Hz, 200Hz
THX recommendation: “80Hz”
■ Speaker distance C)SP DISTANCE
Use this feature to manually input the distance of each
speaker and adjust the delay applied to respective channel.
Ideally, each speaker should be the same distance from the
main listening position. However, this is not possible in
most home situations. Thus, a certain amount of delay
must be applied to the sound from each speaker so that all
sounds arrive at the listening position at the same time.
CROSS OVER
C)SP DISTANCE
. UNIT;;;;;;meters
FRONTL;;;;3.00m
FRONTR;;;;3.00m
CENTER;;;;;3.00m
FREQ;;;80Hz(THX)
p
/p
: Up/Down
< / > : Adjust
■ Speaker level B)SPEAKER LEVEL
Use these settings to manually balance the speaker levels
between the front left (or surround left) speaker and each
speaker selected in SPEAKER SET (page 55).
Choices: –10.0 dB to +10.0 dB
B)SPEAKER LEVEL
.
FR
C
SL
+
*
SB will be displayed if you selected only one surround back
speaker in SURR B L/R SP (page 56).
y
Speaker distances
Choices: 0.3 to 24.00 m (1 to 80 ft)
• FRONT L adjusts the distance of the front left speaker.
Initial setting: 3.0 m (10.0 ft)
• FRONT R adjusts the distance of the front right
speaker. Initial setting: 3.0 m (10.0 ft)
• CENTER adjusts the distance of the center speaker.
Initial setting: 3.0 m (10.0 ft)
• SURR L adjusts the distance of the surround left
speaker. Initial setting: 3.0 m (10.0 ft)
• SURR R adjusts the distance of the surround right
speaker. Initial setting: 3.0 m (10.0 ft)
• SB L* adjusts the distance of the surround back left
speaker. Initial setting: 2.10 m (7.0 ft)
• SB R* adjusts the distance of the surround back right
speaker. Initial setting: 2.10 m (7.0 ft)
• SWFR adjusts the distance of the subwoofer. Initial
setting: 3.0 m (10.0 ft)
• PRES L adjusts the distance of the presence left
speaker. Initial setting: 3.0 m (10.0 ft)
• PRES R adjusts the distance of the presence right
speaker. Initial setting: 3.0 m (10.0 ft)
*
“SURR B” will be displayed if you selected only one surround
back speaker in SURR B L/R SP (page 56).
If you use a handheld SPL meter, hold at arms length and point
upwards so that the meter is in the listening position. With the
meter set to the 70 dB scale and to C SLOW, calibrate each
speaker to 75 dB.
57
ADVANCED
OPERATION
• FR adjusts the balance of the front left and front right
speakers.
• C adjusts the balance of the front left and center
speakers.
• SL adjusts the balance of the front left and surround
left speakers.
• SBL* adjusts the balance of the surround left and
surround back left speakers.
• SBR* adjusts the balance of the surround left and
surround back right speakers.
• SR adjusts the balance of the surround left and
surround right speakers.
• SWFR adjusts the balance of the front left speaker and
subwoofer.
• PRES adjusts the balance of the front and presence
speakers.
Unit UNIT
Choices: meters (m), feet (ft)
Initial setting: feet (ft)
• Select “meters” to input speaker distances in meters.
• Select “feet” to input speaker distances in feet.
01EN00_HTR5890U.book Page 58 Thursday, December 23, 2004 12:39 PM
SET MENU
■ Graphic equalizer D)GRAPHIC EQ
Use this feature to select parametric (PEQ) or graphic
equalizer (GEQ).
Equalizer select EQ SELECT
Choices: PEQ, GEQ
D) GRAPHIC EQ
. EQ SELECT....PEQ
p
p
/ : Up/Down
</> : Select
■ Dynamic range F)DYNAMIC RANGE
Use to select the amount of dynamic range compression to
be applied to your speakers or headphones. This setting is
effective only when the unit is decoding Dolby Digital and
DTS signals.
Choices: MIN (minimum), STD (standard),
MAX (maximum)
F)DYNAMIC RANGE
. SP: MIN STD[MAX
HP: MIN STD[MAX
/ : Up/Down
</> : Select
p
p
• Select “PEQ” to use the equalizer adjusted in auto
setup.
• Select “GEQ” to adjust the built-in 7-band graphic
equalizer (see “Equalizer” below).
Equalizer
Use to match the tonal quality of the center, surround L/R
and surround back L/R speakers with that of the front L/R
speakers.
Choices: –6 to +6 (dB)
D)GRAPHIC EQ
. CHANNEL;;FRONT L
+
63Hz
0dB
160Hz
0dB
400Hz
0dB
1kHz
0dB
2.5kHz
0dB
6.3kHz
0dB
16kHz
0dB
You can adjust 7 frequency bands: 63Hz, 160Hz, 400Hz,
1kHz, 2.5kHz, 6.3kHz, 16kHz
■ Low-frequency effect level E)LFE LEVEL
Use to adjust the output level of the LFE (low-frequency
effect) channel according to the capacity of your
subwoofer or headphones. The LFE channel carries lowfrequency special effects which are only added to certain
scenes. This setting is effective only when this unit
decodes Dolby Digital or DTS signals.
Choices: –20 to 0 (dB)
E)LFE LEVEL
. SPEAKER;;;;;;0dB
HEADPHONE;;;;0dB
p
p
/ : Up/Down
</> : Adjust
Speaker SPEAKER
Select to adjust the speaker LFE level.
Headphone HEADPHONE
Select to adjust the headphone LFE level.
Note
Depending on the settings of LFE LEVEL, some signals may not
be output from the SUBWOOFER PRE OUT jack.
58
Speaker SP
Select to adjust the speaker compression.
Headphone HP
Select to adjust the headphone compression.
• Select “MIN” if you regularly listen at low volume
levels.
• Select “STD” for general use.
• Select “MAX” to preserve the greatest amount of
dynamic range.
01EN00_HTR5890U.book Page 59 Thursday, December 23, 2004 12:39 PM
SET MENU
■ Low frequency test G)LOW FRQ. TEST
■ Headphone tone control H)HP TONE CTRL
Use this feature to adjust the output level of the subwoofer
so it matches your other speakers.
Use to adjust the amount of bass and treble output to your
headphones.
Choices: –6 to +6 (dB)
G)LOW FRQ.TEST
H)HP TONE CTRL
. TEST TONE;;;;OFF
OUTPUT;FRONT L/R
FRQ;;;;;;;;;88Hz
. BASS
TRBL
+
0dB
/ : Up/Down
</> : Adjust
1
Press n to go to OUTPUT and press l / h to
select the speaker you want to compare with
the subwoofer.
Choices: FRONT L/R, FRONT L, CENTER,
FRONT R, SUR.R, SBR*, SBL*, SUR.L, SWFR,
PRESENCE
* “SB” will be displayed if you selected only one surround
back speaker in SURR B L/R SP (page 56).
Press n to go to FRQ and press l / h to
select the frequency you want to use.
Choices: 35 to 250 (Hz), WIDE
Initial: 88 Hz
4
Adjust the volume of the subwoofer with the
controls on the subwoofer so it matches that
of the speaker you are comparing it to.
y
You can use the test tone not only for adjusting the subwoofer
level, but also for checking the low-frequency characteristics of
your listening room. Low-frequency sounds are especially
affected by the listener’s position, speaker placement, subwoofer
polarity and other conditions.
■ Audio set I)AUDIO SET
Use to customize this unit’s overall audio settings.
I)AUDIO SET
. AUDIO MUTE;;MUTE
AUDIO DELAY;;0ms
DIALG.LIFT;;;OFF
/ : Exit
</> : Select
Mute MUTE
Use to adjust how much the mute function reduces the
output volume.
Choices: MUTE, –20 dB
• Select “MUTE” to completely halt all output of sound.
• Select “–20 dB” to reduce the current volume by 20
dB.
Audio Delay AUDIO DELAY
Use to delay the sound output and synchronize it with the
video image. This may be necessary when using certain
LCD monitors or projectors.
Choices: 0 to 240 (ms)
Dialog lift DIALG.LIFT
Use to turn on/off the DIALG.LIFT parameter (see
page 85). This parameter adjusts the height of the front
and center channel sounds (dialog, vocals, etc.) by
assigning some of the front and center channel elements to
the presence speakers.
Choices: ON, OFF
• Select “ON” to turn on DIALG.LIFT effect.
• Select “OFF” to turn off DIALG.LIFT effect.
Note
DIALG.LIFT appears only when PRESENCE is set to “YES”
(see page 31).
59
ADVANCED
OPERATION
3
• Use BASS to adjust the headphone bass level.
• Use TRBL to adjust the headphone treble level.
p
p
2
Press l / h to set TEST TONE to ON, and
adjust the volume with VOL –/+ so you can
hear the tone.
Do not turn up the volume too high. If no test tone is
heard, turn down the volume, set this unit in the
standby mode and make sure all the necessary
connections are correct.
The tone generator produces a narrow-band noise
centered on a specified frequency by the band pass
filter, as well as a wide-band noise.
01EN00_HTR5890U.book Page 60 Thursday, December 23, 2004 12:39 PM
SET MENU
■ Presence/surround back channel select
J)PR/SBch SELECT
Surround back and presence speakers do not output sound
simultaneously. You can select to prioritize either speaker
set when playing sources that contain surround back
channel signals using CINEMA DSP sound field
programs.
Choices: PRch, SBch
Using INPUT MENU
Use to reassign digital input/outputs, select the input mode
or rename your inputs.
3 INPUT MENU
. A)I/OASSIGNMENT
B)INPUTMODE
C)INPUTRENAME
D)MULTI CH INPUT
p
/p
: Up/Down
< / > : Enter
J)PR/SBch SELECT
PRch [SBch
p
p
/ : Exit
</> : Select
• Select “PRch” to use presence speakers even when
surround back channel signals are input. The signals
for the surround back channel will be output from
surround speakers.
• Select “SBch” to use surround back speakers when a
surround back channel signal is detected in a CINEMA
DSP program. Presence channel signals will be output
from front speakers.
■ Input/output assignment
A)I/O ASSIGNMENT
You can assign jacks according to the component to be
used if this unit’s initial settings do not correspond to your
needs. Change the following parameters to reassign the
respective jacks and effectively connect more
components.
Once the inputs have been reassigned, you can select the
corresponding component by using INPUT on the front
panel or the input selector buttons on the remote control.
Note
The default settings are displayed with parentheses on the OSD.
CMPNT-V IN for COMPONENT VIDEO INPUT
jacks [A] and [B]
Choices: DVD, V-AUX, DVR/VCR 2, VCR 1, CBL/SAT,
DTV, CD-R
CMPNT-V INPUT
. [A];;;;; DVD
( DVD
)
[B];;;;; DTV
(DTV)
OPTICAL OUT for OPTICAL OUTPUT jacks (1)
and (2)
Choices: MD/TAPE, CD-R, CD, PHONO, V-AUX,
DVR/VCR 2, VCR 1, CBL/SAT, DTV, DVD
OPTICAL OUT
. (1);;;;;MD/TAPE
(MD/TAPE )
(2);;;;; CD-R
(CD-R)
60
01EN00_HTR5890U.book Page 61 Thursday, December 23, 2004 12:39 PM
SET MENU
OPTICAL IN for OPTICAL INPUT jacks (3), (4), (5)
and (6)
Choices: CD, PHONO, DVR/VCR 2, VCR 1, CBL/SAT,
DTV, DVD, MD/TAPE, CD-R
■ Input rename C)INPUT RENAME
Use this feature to change the name of the inputs on the
OSD and front panel display.
C)INPUT RENAME
OPTICAL IN
DVD
. (3);;;;;
CD
(
CD
)
(4);;;;; DVD
(DVD )
(5);;;;; DTV
(DTV )
COAXIAL IN
. (7);;;;;
CD
(
CD
)
(8);;;;; DVD
(DVD )
(9);;;;;DVR/VCR2
(DVR/VCR2)
</> : Position
/ : Character
1
Press an input selector button to select the
input you want to change the name of.
2
Set AMP/SOURCE/TV to AMP.
3
Press l / h to place the _ (under-bar) under
the space or the character you want to edit.
4
Press k / n to select the character you want
to use and l / h to move to the next one.
• You can use up to 8 characters for each input.
• Press n to change the character in the following
order, or press k to go in the reverse order:
A to Z, space, 0 to 9, space, a to z, space, #, *, +,
etc.
5
Repeat steps 1 through 4 to rename each
input.
6
Press h repeatedly to exit from INPUT
RENAME.
Notes
• You cannot select a specific item more than once for the same
type of jack.
• When you connect a component to both the COAXIAL and
OPTICAL jacks, priority is given to the input signals from the
COAXIAL jack.
■ Input mode B)INPUT MODE
Use this feature to designate the input mode for sources
connected to the DIGITAL INPUT jacks when you turn on
this unit (see page 40 for details about the input mode).
Choices: AUTO, LAST
DVD
p
p
COAXIAL IN for COAXIAL INPUT jacks (7), (8) and
(9)
Choices: CD, PHONO, V-AUX, DVR/VCR 2, VCR 1,
CBL/SAT, DTV, DVD, MD/TAPE, CD-R
->
ADVANCED
OPERATION
B)INPUT MODE
[AUTO
LAST
p
p
/ : Exit
</> : Select
• Select “AUTO” to allow this unit to automatically
detect the type of input signal and select the
appropriate input mode.
• Select “LAST” to set this unit to automatically select
the last input mode used for that source.
Note
The last setting for the EXTD. SUR button will not be recalled,
even when “LAST” is selected.
61
01EN00_HTR5890U.book Page 62 Thursday, December 23, 2004 12:39 PM
SET MENU
■ Multi Channel Input D)MULTI CH INPUT
Use this feature to set the direction of the signals input
into the center, subwoofer and surround channels when a
source component is connected to the MULTI CH INPUT
jacks. If you are inputting 8-channel signals from an
external decoder, use this feature to select jacks for the
additional front signals.
Using OPTION MENU
4 OPTION MENU1/2
. A)DISPLAYSET
B)MEMORYGUARD
C)PARAM.INI
D)SP IMP. SET
p
/p
: Up/Down
< / > : Enter
D)MULTI CH INPUT
■ Display set A)DISPLAY SET
A)DISPLAY SET
p
p
. [6CH
8CH
(FRNT/SB-> FRNT)
CENTER ->CENTER
SWFR
-> SWFR
SL/SR
-> SL/SR
( ---> SB )
</> : Select
/ : Up/Down
Note
If ZONE2 AMP (page 64) is set to “ON”, no sound is output
from the surround back speakers even if you select “8ch”. In this
case select “6ch” and set the output setting of the external
decoder to 6 channels.
FRNT
If you selected “8ch”, you can select analog audio jacks to
which front signals from an external decoder will be input.
Choices: DVD, DTV, CBL/SAT, VCR 1, DVR/VCR 2,
MD/TAPE, CD-R, CD, V-AUX
CENTER
Use to select where the signals input to the CENTER jack
will be output.
Choices: CENTER, FRONT
• Select “CENTER” to output the signals from the center
speaker.
• Select “FRONT” to output the signals from the front
left and right speakers.
SWFR
Use to select where the signals input to the
SUBWOOFER jack will be output.
Choices: SWFR, FRONT
• Select “SWFR” to output the signals from the
subwoofer.
• Select “FRONT” to output the signals from the front
left and right speakers.
SL/SR
Use to select where the signals input to the SURROUND
jacks will be output.
Choices: SL/SR, FRONT
• Select “SL/SR” to output the signals from the surround
speakers.
• Select “FRONT” to output the signals from the front
left and right speakers.
62
/ : Up/Down
</> : Select
p
p
6ch/8ch
This setting is used to select the number of channels input
from an external decoder.
Choices: 6ch, 8ch
. DIMMER;;;;;;;;;0
OSD SHIFT;;;;;;0
GRAY BACK;;;AUTO
V CONV.;;;;;;;ON
CMPNT OSD;;;;;ON
Dimmer DIMMER
Use to adjust the brightness of the front panel display.
Choices: –4 to 0
OSD shift OSD SHIFT
Use to adjust the vertical position of the OSD.
Choices: +5 (downward) to –5 (upward)
• Press h to lower the position of the OSD.
• Press l to raise the position of the OSD.
Gray back GRAY BACK
Selecting “AUTO” for the on-screen display setting
displays a gray background when there’s no video signal
input.
If “OFF” is selected, information can only be displayed on
the screen when a video signal is being input.
Choices: AUTO, OFF
Note
If GRAY BACK is set to “OFF”, information cannot be displayed
when only component signals are being input.
01EN00_HTR5890U.book Page 63 Thursday, December 23, 2004 12:39 PM
SET MENU
Video conversion V CONV.
Use this feature to turn on/off conversion of composite
(VIDEO) signals to both S-video and component signals.
This allows you to output converted video signals from
the S VIDEO or COMPONENT VIDEO jacks when no
S-video or component signals are input. This feature also
converts S-video signals to component signals when no
component signals are input.
Choices: ON, OFF
• Select “OFF” not to convert any signals.
• Select “ON” to convert composite signals to S-video
and component signals, and to convert S-video signals
to component signals.
■ Parameter initialization C)PARAM. INI
Use this feature to initialize the parameters for each sound
field program within a sound field program group. When
you initialize a sound field program group, all of the
parameter values within that group revert to their initial
settings.
Press the corresponding numeric button for the sound field
program that you want to initialize.
An asterisk (*) next to a program number means that the
parameter values have been changed from their initial
settings.
C)PARAM. INI
Notes
• Converted video signals are only output to the MONITOR OUT
jacks. When recording you must make the same type of video
connections (composite or S-video) between each component.
• When converting composite video or S-video signals from a
VCR to component video signals, the picture quality may suffer
depending on your VCR.
Component OSD CMPNT OSD
Use this feature to turn on/off OSD output to the
COMPONENT VIDEO MONITOR OUT jacks when
using SET MENU, the test tone or the parameter
functions.
Choices: ON, OFF
• Select “ON” to output the OSD signals from
COMPONENT VIDEO MONITOR OUT jacks.
• Select “OFF” if you do not want to output the OSD
signals from COMPONENT VIDEO MONITOR OUT
jacks.
Note
1
2
3
*4
*5
6
7
8
9
*0
Notes
• You cannot automatically revert to the previous parameter
settings once you initialize a sound field program group.
• You cannot separately initialize individual sound field
programs.
• You cannot initialize any program groups when MEMORY
GUARD is set to ON.
■ Speaker impedance setting
D)SP IMP.SET
Use to select the impedance of your speakers.
Choices: 6ohms, 8ohms
D)SP IMP.SET
Minimum 8ohms
SET MENU functions even when “OFF” is selected.
/ : Exit
</> : Select
p
p
■ Memory guard B)MEMORY GUARD
ADVANCED
OPERATION
Use this feature to prevent accidental changes to DSP
program parameter values and other system settings.
Choices: OFF, ON
B)MEMORY GUARD
[OFF
ON
p
p
/ : Exit
</> : Select
Select “ON” to protect:
• DSP program parameters
• All SET MENU items
• All speaker levels
• The on-screen display (OSD) mode
Note
When MEMORY GUARD is set to “ON”, you cannot use the test
tone or select any other SET MENU items.
63
01EN00_HTR5890U.book Page 64 Thursday, December 23, 2004 12:39 PM
SET MENU
■ Zone set E)ZONE SET
E)ZONE SET
SP B;;;;;;MAIN
p
p
/ : Exit
</> : Main
Notes
• If you select “ZONE B” and connect headphones to the
PHONES jack on the unit, the sound is output from both
headphones and SPEAKERS B.
• When a DSP program is selected, the unit automatically enters
the Virtual CINEMA DSP mode.
■ Zone 2 set F)ZONE2 SET
F)ZONE2 SET
OUTPUT VOL;;VAR.
ZONE2 AMP....OFF
p
p
/ : Up/Down
</> : Select
Output volume OUTPUT VOL
Use to select how the volume control will operate with
regard to the ZONE 2 OUTPUT jacks.
Choices: VAR., FIX
• Select “VAR.” to adjust the ZONE 2 OUTPUT volume
simultaneously with VOL –/+ on the remote control.
• Select “FIX” to fix the ZONE 2 OUTPUT volume
level to a standard line level.
64
■ Zone 3 set G)ZONE3 SET
G)ZONE3 SET
OUTPUT VOL;;VAR.
/ : Exit
</> : Select
p
p
Speakers B SP B
Use to specify the location of speakers connected the
SPEAKERS B terminals.
Choices: MAIN, ZONE B
• Select “MAIN” to turn on/off SPEAKERS A and B
when the speakers connected to the SPEAKERS B
terminals are set in the main room.
• Select “ZONE B” if the speakers connected to the
SPEAKERS B terminals are set in another room. If
SPEAKERS A is turned OFF and SPEAKERS B is
turned ON, all the speakers including the subwoofer in
the main room are muted and the unit outputs sound
from SPEAKERS B only.
Zone 2 amplifier ZONE2 AMP
Use to select how the ZONE 2 speakers will be amplified.
Choices: ON, OFF
• Select “OFF” if you do not use Zone 2 speakers or if
you connect your Zone 2 speakers through an external
amplifier connected to this unit’s ZONE 2 OUTPUT
jacks.
• Select “ON” to use this unit’s internal amplifier if you
connect your Zone 2 speakers directly to this unit’s
PRESENCE/ZONE 2 speaker terminals.
Output volume OUTPUT VOL
Use to select how the volume control will operate with
regard to the ZONE 3 OUTPUT jacks.
Choices: VAR., FIX
• Select “VAR.” to adjust the ZONE 3 OUTPUT volume
simultaneously with VOL –/+ on the remote control.
• Select “FIX” to fix the ZONE 3 OUTPUT volume
level to a standard line level.
01EN00_HTR5890U.book Page 65 Thursday, December 23, 2004 12:39 PM
REMOTE CONTROL FEATURES
REMOTE CONTROL FEATURES
In addition to controlling this unit, the remote control can also operate other audio and video components made by
YAMAHA and other manufacturers. To control these other components, you must set up the remote control with the
appropriate remote control codes. This remote control also has a Learn feature which allows the remote to acquire
functions from other remote controls equipped with an infrared remote control transmitter.
Control area
■ Controlling this unit
■ Controlling other components
The shaded areas below can be used to control this unit
after setting AMP/SOURCE/TV to AMP to activate the
AMP mode.
The shaded areas below can be used to control other
components. Each button has a different function
depending on the selected components. Select the
component you want to control by pressing an input
selector button or SELECT k/n. The name of the selected
component appears in the display window.
SYSTEM
POWER
POWER
TV
AV
STANDBY
POWER
A
B
INPUT MODE
SLEEP
PHONO
TUNER
CD
MULTI CH IN
V-AUX
CBL/SAT
MD/TAPE
CD-R
DTV
VCR 1
DVR/VCR2
DVD
Display
window
SELECT
PRESET
AMP/SOURCE/
TV
Set to AMP to
operate this unit.
Set to SOURCE
to operate the
component
selected with an
input selector
button.
Set to TV to
operate the
television.
AMP
+
+
+
TV VOL
CH
VOL
–
–
–
SOURCE
TV
A/B/C/D/E
TV MUTE
TV INPUT
MUTE
LEVEL
SET MENU
TITLE
MENU
PURE DIRECT
NIGHT
The buttons inside
the dotted lines
control this unit in
any mode
(SYSTEM
POWER,
STANDBY,
SLEEP, INPUT
MODE, VOLUME
+/–, MUTE, PURE
DIRECT and
STRAIGHT/
EFFECT).
A/B buttons and the input
selector buttons switch the
function of the component
control area below.
* Use the A/B buttons to
control other components
regardless of whether they
are connected to this unit.
Factory setting:
A...LD player
B...Tape deck
SELECT k/n switches
control to another
component without
changing the input source
on this unit.
AUDIO
ENTER
TEST
ON SCREEN
RETURN
DISPLAY
JAZZ
ROCK
2
3
4
ENTERTAIN
MUSIC
TV THTR
MOVIE
7
STANDARD
9
0
FREQ/RDS
EON
MACRO
B
TUNER
INPUT MODE
SLEEP
V-AUX
CBL/SAT
MD/TAPE
CD-R
DTV
VCR 1
DVR/VCR2
DVD
POWER
POWER
TVCD
MULTI
AV CH IN
SELECT
PRESET
AMP
+
+
+
TV VOL
CH
VOL
SOURCE
–
–
–
A/B/C/D/E
TV MUTE
TV INPUT
TV
PRESET
+
+
MUTE
TV VOL
LEVEL
SET MENU
TITLE
MENU
–
CH
PURE DIRECT
–
TV MUTE
ENTER
TVNIGHT
INPUT
AUDIO
LEVEL
TITLE
CLEAR
RE–NAME
SET MENU
MENU
TEST
ON SCREEN
RETURN
DISPLAY
STRAIGHT
NIGHT
EFFECT
ENTER
STEREO
HALL
1
2
Component
control area
You can control up to 14
different components by
setting appropriate remote
control codes (see
page 76).
ENTERTAIN
JAZZ
ROCK
3
4
TEST
ENT.
MODE PTY SEEK START
LEARN
A
PHONO
Display
window
EXTD. SUR
+10
DISC SKIP
ON
POWER
8
REC
OFF
STANDBY
RETURN
TV THTR
MUSIC
5
6
THX
SURROUND
9
0
MOVIE
7
1
+10
ENTERTAIN
EON
REC
HALL
SUR. BACK
2
5
6
THX
STANDARD
9
0
MODE PTY SEEK START
FREQ/RDS
ON
MACRO
LEARN
JAZZ
ROCK
3
4
TV THTR
MOVIE
ENT.
MUSIC
DISC SKIP
OFF
DISPLAY
8
STEREO
FREQ/RDS
AUDIO
ON SCREEN
ADVANCED
OPERATION
THX
AV
A/B/C/D/E
EFFECT
HALL
1
6
POWER
TV
STRAIGHT
STEREO
5
SYSTEM
POWER
CLEAR
CHP/INDEX
EON
7
8
EXTD. SUR
+10
ENT.
MODE PTY SEEK START
RE–NAME
REC
DISC SKIP
English
65
01EN00_HTR5890U.book Page 66 Thursday, December 23, 2004 12:39 PM
REMOTE CONTROL FEATURES
■ Controlling optional components
(OPTN area)
OPTN is an additional component control area that can be
programmed with remote control functions independently
from any input source. This area is useful for
programming commands that are to be used only as a part
of a macro function or for components that do not have a
valid remote control code.
To select the OPTN control area, press n repeatedly until
OPTN appears in the display window.
Setting remote control codes
You can control other components by setting the
appropriate remote control codes. Codes can be set up for
each input area.
The following table shows the default component
(Library: component category) and the remote control
code for each input area.
Remote Control Code Default Settings
Notes
• You cannot set a remote control code for this area. See page 68
to program buttons operated within this component control
area.
• The OPTN area cannot be used when AMP1Z or NO is selected
in the amplifier library (see page 67).
*
Input area
Library
(Component
category)
Default YAMAHA
code*
A
LD
2200
B
TAPE
2700, (2701)
PHONO
TV
–
TUNER
TUNER
2600, (0203, 1203,
1358, 2601)
CD
CD
2300, (2301)
MULTI CH
INPUT
DVD
2102, (0517, 0566,
0572, 2100, 2101)
V-AUX
VCR
–
CBL/SAT
CABLE
–
MD/TAPE
MD
2500, (2501, 2502)
CD-R
CD-R
2400
DTV
TV
–
VCR 1
VCR
–
DVR/VCR2
DVR
2807
DVD
DVD
2102, (0517, 0566,
0572, 2100, 2101)
Additional YAMAHA codes available are given in
parentheses.
Note
You may not be able to operate your YAMAHA component even
if a YAMAHA remote control code is preset as listed above. In
this case, try setting another YAMAHA remote control code.
1
Set AMP/SOURCE/TV to SOURCE.
AMP
SOURCE
TV
66
01EN00_HTR5890U.book Page 67 Thursday, December 23, 2004 12:39 PM
REMOTE CONTROL FEATURES
2
Press an input selector button to select the
source component you want to set up.
A
B
INPUT MODE
SLEEP
PHONO
TUNER
CD
MULTI CH IN
V-AUX
CBL/SAT
MD/TAPE
CD-R
DTV
VCR 1
DVR/VCR2
DVD
4
Note
“0000” appears in the display window if no code has been
set.
5
3
Press ENTER.
The four-digit code set for the selected component
appears in the display window.
Press and hold LEARN for about 3 seconds
using a ballpoint pen or similar object.
The library name (ex. “L:DVD”) and the selected
component name (ex. “DVD”) appear alternately in
the display window.
Press the numeric buttons to enter the fourdigit remote control code for the component
you want to use.
For a complete list of available remote control codes,
refer to “LIST OF REMOTE CONTROL CODES” at
the end of this manual.
STEREO
LEARN
6
y
If you want to setup for another component, press the input
selector button or SELECT k/n to select the component.
Notes
ROCK
3
4
TY THTR
MOVIE
7
5
6
THX
STANDARD
9
0
8
EXTD. SUR
+10
ENT.
Press ENTER to set the number.
“OK” appears in the display window if setting was
successful.
“NG” appears in the display window if the setting
was unsuccessful. In this case, start over from step 3.
If you continuously want to set up another code for another
component, press the input selector button or SELECT k/n
to select the component, then repeat steps 4 through 6.
7
Press LEARN again to exit from the setup
mode.
LEARN
ADVANCED
OPERATION
*
JAZZ
2
MUSIC
y
• Be sure to press and hold LEARN for at least 3 seconds,
otherwise the learning process will start.
• If you do not complete each of the following steps within
30 seconds, the setting mode will be automatically
canceled. In this case, press LEARN again.
If you want to change a library (component
category), press l / h. You can set a
different type of component.
Library choices: L:DVD, L:DVR, L:LD, L:CD,
L:CDR, L:MD, L:TAP (tape), L:TUN (tuner),
L:AMP*, L:TV, L:CAB (cable), L:SAT (satellite),
L:VCR
HALL
1
ENTERTAIN
The amplifier library (L:AMP) code is preset to “AMP1”
(2000) in order to operate this unit. However, you can
switch by entering one of the following five codes if
necessary.
Function
Code
To operate this unit.
2000
AMP1Z
To operate ZONE 2 or ZONE 3
features.
2001
NO
To operate other manufacturers’
receivers / amplifiers using this
unit’s remote control
2004
AMP1
67
01EN00_HTR5890U.book Page 68 Thursday, December 23, 2004 12:39 PM
REMOTE CONTROL FEATURES
8
Press one of the buttons shaded below to
see if you can control your component. If you
can, the remote control code is correct.
TRANSMIT
SYSTEM
POWER
POWER
TV
AV
STANDBY
POWER
A
B
INPUT MODE
SLEEP
PHONO
TUNER
CD
MULTI CH IN
V-AUX
CBL/SAT
MD/TAPE
CD-R
DTV
VCR 1
DVR/VCR2
DVD
THX
STANDARD
9
0
FREQ/RDS
EON
EXTD. SUR
+10
ENT.
MODE PTY SEEK START
REC
DISC SKIP
OFF
ON
MACRO
LEARN
CLEAR
RE–NAME
y
If the manufacturer of your component has more than one
code, try each of them until you find the correct one.
Programming codes from other
remote controls (Learn)
Use the Learn feature if you want to program functions
not included in the basic operations covered by remote
control codes, or an appropriate remote control code is not
available. You can program any of the buttons available in
the component control area (see page 65). The buttons can
be programmed independently for each component.
Note
This remote control transmits infrared beams. If the other remote
control also uses infrared beams, this remote control can learn
most of its functions. However, you may not be able to program
some special signals or extremely long transmissions. (Refer to
the operating instructions for the other remote control.)
Notes
• “ERROR” appears in the display window if you press a button
not indicated in the respective step, or when you press more
than one button simultaneously.
• The supplied remote control does not contain all possible codes
for commercially available audio and video components
(including YAMAHA components). If operation is not possible
with any of the remote control codes, program the new remote
control function using the Learn feature (see “Programming
codes from other remote controls (Learn)”) or use the remote
control supplied with the component.
• Function programmed using the learn feature take priority over
remote control code functions.
1
Set AMP/SOURCE/TV to SOURCE.
AMP
SOURCE
TV
2
3
Press an input selector button to select a
source component.
A
B
INPUT MODE
SLEEP
PHONO
TUNER
CD
MULTI CH IN
V-AUX
CBL/SAT
MD/TAPE
CD-R
DTV
VCR 1
DVR/VCR2
DVD
Place this remote control about 5 to 10 cm
(2 to 4 in) apart from the other remote control
on a flat surface so that their infrared
transmitters are aimed at each other.
MULTI CH IN
SLEEP
SYSTEM
AV
CD
INPUT MODE
TRANSMIT
B
DVD
CD-R
POWER
TV
TUNER
MD/TAPE
STANDBY
A
DVR/VCR2
POWER
PHONO
VCR 1
CBL/SAT
POWER
DTV
V-AUX
SELECT
5 to 10 cm (2 to 4 in)
68
01EN00_HTR5890U.book Page 69 Thursday, December 23, 2004 12:39 PM
REMOTE CONTROL FEATURES
4
Press LEARN using a ballpoint pen or similar
object.
“LEARN” and the selected component name (ex.
“DVD”) appear alternately in the display window.
7
Press LEARN again to exit the learning
mode.
LEARN
Notes
LEARN
Notes
• Do not press and hold LEARN. If you hold it down for
more than 3 seconds, the remote enters the remote control
code setting mode.
• If you do not complete each of the following steps within
30 seconds, the learning mode will be automatically
canceled. In this case, press LEARN again.
5
Press the button for which you want to
program the new function.
“LEARN” appears in the display window.
STANDBY
MULTI CH IN
SLEEP
POWER
TRANSMIT
CD
INPUT MODE
SYSTEM
B
AV
TUNER
CD-R
POWER
A
MD/TAPE
TV
PHONO
CBL/SAT
POWER
V-AUX
SELECT
TV
AMP
SOURCE
DVD
+
DVR/VCR2
–
VOL
VCR 1
+
PURE DIRECT
AUDIO
NIGHT
STRAIGHT
DTV
–
CH
PRESET
–
MUTE
SET MENU
MENU
DISPLAY
ON SCREEN
+
TV INPUT
A/B/C/D/E
ENTER
TV VOL
TV MUTE
LEVEL
TITLE
TEST
RETURN
6
• “ERROR” appears in the display window if you press a button
not indicated in the respective step, or when you press more
than one button simultaneously.
• This remote control can learn approximately 200 functions.
However, depending on the signals learned, “FULL” may
appear in the display before you program 200 functions. In this
case, clear unnecessary programmed functions to make room
for further learning.
• Learning may not be possible in the following cases:
– When the batteries in the remote control for this unit or other
components are weak.
– When the distance between the two remote controls is too
great or too small.
– When the remote control infrared windows are not facing
each other at the appropriate angle.
– When the remote control is exposed to direct sunlight.
– When the function to be programmed is continuous or
uncommon.
STANDBY
MULTI CH IN
SLEEP
POWER
TRANSMIT
CD
INPUT MODE
SYSTEM
B
DVD
CD-R
AV
TUNER
MD/TAPE
POWER
A
DVR/VCR2
TV
PHONO
VCR 1
CBL/SAT
POWER
DTV
SELECT
V-AUX
ADVANCED
OPERATION
Press and hold the button you want to
program on the other remote control until
“OK” appears in the display window.
“NG” appears in the display window if learning was
unsuccessful. In this case, start over from step 5.
y
• If you want to program another function, repeat steps 5
and 6.
• If you continuously want to program another function for
another component, press the input selector button or
SELECT k/n to select the component, then repeat steps 3
through 6.
69
01EN00_HTR5890U.book Page 70 Thursday, December 23, 2004 12:39 PM
REMOTE CONTROL FEATURES
Changing source names in the
display window
5
Press l / h to move the cursor to the next
position.
6
Press ENTER to set the new name.
“OK” appears in the display window if renaming was
successful.
“NG” appears in the display window if renaming was
unsuccessful. In this case, start over from step 4.
You can change the name that appears in the display
window on the remote control if you want to use a
different name than the factory preset. This is useful when
you have set the input selector to control a different
component.
1
Set AMP/SOURCE/TV to AMP or SOURCE.
AMP
SOURCE
TV
y
2
Press an input selector button to select the
source component you want to rename.
The selected component name appears in the display
window.
A
B
INPUT MODE
SLEEP
PHONO
TUNER
CD
MULTI CH IN
V-AUX
CBL/SAT
MD/TAPE
CD-R
DTV
VCR 1
DVR/VCR2
DVD
If you continuously want to rename another component,
press the input selector button or SELECT k/n to select the
component, then repeat steps 4 through 6.
7
Press RE-NAME again to exit the renaming
mode.
RE-NAME
Note
3
Press RE-NAME using a ballpoint pen or
similar object.
RE-NAME
Note
If you do not complete each of the following steps within 30
seconds, the renaming mode will be automatically canceled.
In this case, press RE-NAME again.
4
70
Press k / n to select and enter a character.
Pressing n changes the character as follows: A to Z,
1 to 9, 0, + (plus), – (hyphen), ; (semicolon), / (slash),
and space.
(Pressing k changes the characters in reverse order.)
“ERROR” appears in the display window if you press a
button not indicated in the respective step, or when you
press more than one button simultaneously.
01EN00_HTR5890U.book Page 71 Thursday, December 23, 2004 12:39 PM
REMOTE CONTROL FEATURES
Using the Macro feature
The Macro feature makes it possible to perform a series of operations with the press of a single button. For example,
when you want to play a CD, normally you would turn on the components, select the CD input, and press the play button
to start playback. The Macro feature lets you perform all of these operations simply by pressing the CD macro button.
The buttons listed as macro buttons below are factory set with macro programs. You can also program your own macros
(see page 72).
Press a macro button
CD
To automatically transmit these signals in order
SYSTEM
POWER
CD
Macro buttons
First
Second
Third
STANDBY
STANDBY
—
—
SYSTEM
SYSTEM
POWER
POWER
POWER
(CD area)
(*4)
TV
—
A
—
—
—
B
—
—
—
PHONO
PHONO
—
TUNER
TUNER
CD
CD
MULTI CH IN
MULTI CH IN
—
V-AUX
V-AUX
—
CBL/SAT
—
CBL/SAT
(*3)
—
(CD area) (*2)
SYSTEM
POWER
MD/TAPE
MD/TAPE
(*1)
CD-R
DTV
DTV
VCR 1
DVR/VCR2
DVD
VCR 1
DVR/VCR2
DVD
ADVANCED
OPERATION
CD-R
(MD/TAPE area) (*2)
(CD-R area) (*2)
—
(VCR 1 area) (*2)
(DVR/VCR 2 area) (*2)
(DVD area) (*2)
*1
You can turn on some components (including YAMAHA components) connected to this unit by connecting them to the AC
OUTLET(S) on the rear panel of this unit. (Power control may not be synchronized with this unit depending on the component. For
details, refer to the operating instructions for the connected component.)
*2 Playback can be started for any YAMAHA remote control-compatible MD recorder, CD player, CD recorder, DVD player, or DVD
recorder. When using macros to operate other components, you will need to program the play button on the control area of that
component (see page 68) or set a remote control code (see page 66).
*3 When TUNER is selected as the input source, this unit plays the last station received before the unit was set in the standby mode.
*4 TV POWER will operate your TV without switching the input if the remote control code for your TV is set up in the DTV or PHONO
area. If the remote control code for your TV is set up in both the DTV and PHONO areas, priority is given to signal in the DTV area.
71
01EN00_HTR5890U.book Page 72 Thursday, December 23, 2004 12:39 PM
REMOTE CONTROL FEATURES
■ Macro operations
■ Programming macro operations
Macro buttons
TRANSMIT
SYSTEM
POWER
POWER
TV
AV
A
B
STANDBY
POWER
INPUT MODE
SLEEP
FREQ/RDS
EON
MODE PTY SEEK START
REC
PHONO
TUNER
CD
MULTI CH IN
V-AUX
CBL/SAT
MD/TAPE
CD-R
DTV
VCR 1
DVR/VCR2
DVD
DISC SKIP
OFF
ON
MACRO
LEARN
CLEAR
RE–NAME
You can program your own macros and use the macro
feature to transmit several remote control commands in
sequence at the press of a button. Be sure to set up remote
control codes or perform learning operations before
programming the macro. We do not recommend
programming continuous operations such as volume
control in a macro.
Notes
MACRO ON/OFF MACRO
1
Set MACRO ON/OFF to ON.
2
Press a macro button.
• The default macro is not cleared when a new macro is
programmed for a button. The default macro can be used again
when the programmed macro is cleared.
• It is not possible to add a new signal (macro step) to the default
macro. Programming a macro changes all macro contents.
1
Set AMP/SOURCE/TV to AMP or SOURCE.
Notes
• When you have finished using the Macro feature, set MACRO
ON/OFF to OFF.
• While the remote is carrying out a Macro program, it will not
accept any other button’s function until the macro operation is
complete (the transmission indicator stops flashing).
• Continue to aim the remote control at the component the macro
is operating until the macro operation is complete.
AMP
SOURCE
TV
2
Press MACRO using a ballpoint pen or
similar object.
“MCR ?” appears in the display window.
MACRO
Note
If you do not complete each of the following steps within 30
seconds, the macro programming mode will be
automatically canceled. In this case, press MACRO again.
3
Press the macro button you want to use to
operate the macro.
The macro button name (ex. “M:DVD”) and the
selected component name (ex. “DVD”) appear
alternately in the display window.
A
B
INPUT MODE
SLEEP
PHONO
TUNER
CD
MULTI CH IN
V-AUX
CBL/SAT
MD/TAPE
CD-R
DTV
VCR 1
DVR/VCR2
DVD
Note
“AGAIN” appears in the display window if you press a
button other than a macro button.
72
01EN00_HTR5890U.book Page 73 Thursday, December 23, 2004 12:39 PM
REMOTE CONTROL FEATURES
4
Press the buttons for the functions you want
to include in the macro operation in
sequence.
You can set up to 10 steps (10 functions). After you
have set 10 steps, “FULL” appears and the remote
control automatically exits the macro mode.
Clearing function sets
You can clear all changes made in each function set, such
as learned functions, renamed source names and setup
remote control codes.
1
Set AMP/SOURCE/TV to AMP or SOURCE.
AMP
SYSTEM
POWER
POWER
TV
AV
A
B
PHONO
TUNER
V-AUX
DTV
STANDBY
2
POWER
MCR 2: AV POWER
INPUT MODE
SLEEP
CD
MULTI CH IN
CBL/SAT
MD/TAPE
CD-R
VCR 1
DVR/VCR2
DVD
SOURCE
TV
2
MCR 1: DVD
1
FREQ/RDS
EON
Press CLEAR by using a ballpoint pen or
similar object.
“CLEAR” appears in the display window.
MODE PTY SEEK START
CLEAR
REC
3
DISC SKIP
OFF
ON
MACRO
LEARN
CLEAR
MCR 3: h
RE–NAME
Note
If you do not complete each of the following steps within 30
seconds, the clearing mode will be automatically canceled.
In this case, press CLEAR again.
Indicates the
number of macro
steps entered
3
L:DVD
Note
component and corresponding component control area.
5
Press MACRO again when the operation
sequence you want to program is complete.
4
Press and hold CLEAR again for about 3
seconds.
“WAIT” appears in the display window. If clearing
was successful, “C:OK” appears in the display
window.
CLEAR
Note
“ERROR” appears in the display window if you press a
button not indicated in the respective step, or if you press
more than one button simultaneously.
Memory back-up
If the remote control is without batteries for more than
2 minutes, or if exhausted batteries remain in the
remote control, the contents of the memory may be
cleared. If the memory is cleared, insert new batteries,
set up the remote control code(s) and program any
acquired functions that may have been cleared.
y
Once you have cleared a learned function for a button, the
button reverts to the factory setting (or to the manufacturer
setting, if you have set remote control codes).
Note
“L:ALL” and “FCTRY” may take about 30 seconds to
complete.
73
ADVANCED
OPERATION
(L: name of a component)
Clears all learned functions in the respective
component control area. Press an input selector
button to select the component.
L:AMP Clears all learned functions for this unit’s control
area.
L:ALL Clears all learned functions.
M:ALL Clears all programmed macros
RNAME Clears all renamed source names.
FCTRY Clears all remote functions and returns the remote
to the factory settings.
Flashes alternately so you can
set the next step
• The macro operation may not work for a component
which takes time to start up.
• To change the selected source component, press SELECT k/
n. Pressing the input selector buttons will program a macro
step, whereas SELECT k/n only changes the selected
Press k / n to select the clear mode.
01EN00_HTR5890U.book Page 74 Thursday, December 23, 2004 12:39 PM
REMOTE CONTROL FEATURES
5
Press CLEAR to exit from the clearing mode.
CLEAR
Notes
• “C:NG” appears in the display window if clearing was
unsuccessful. In this case, start over from step 3.
• “ERROR” appears in the display window if you press a button
not indicated in the respective step, or if you press more than
one button simultaneously.
Clearing individual functions
■ Clearing a learned function
You can clear the function learned for a certain button in
each control area.
1
Set AMP/SOURCE/TV to SOURCE.
AMP
SOURCE
TV
2
3
Press an input selector button to select the
source component containing the function
you want to clear.
The selected component name appears in the display
window.
A
B
INPUT MODE
SLEEP
PHONO
TUNER
CD
MULTI CH IN
V-AUX
CBL/SAT
MD/TAPE
CD-R
DTV
VCR 1
DVR/VCR2
DVD
Press LEARN using a ballpoint pen or similar
object.
“LEARN” and the selected component name (ex.
“DVD”) appear alternately in the display window.
LEARN
Notes
• Do not press and hold LEARN. If you hold it down for
more than 3 seconds, the remote control enters the remote
control code setting mode.
• If you do not complete each of the following steps within
30 seconds, the learning mode will be automatically
canceled. In this case, press LEARN again.
74
01EN00_HTR5890U.book Page 75 Thursday, December 23, 2004 12:39 PM
REMOTE CONTROL FEATURES
■ Clearing a macro function
4
Press and hold CLEAR using a ballpoint pen
or similar object, then press the button you
want to clear for about 3 seconds.
“C:OK” appears in the display window if clearing
was successful.
DTV
VCR 1
DVR/VCR2
You can clear the function programmed for a certain
macro button.
1
Set AMP/SOURCE/TV to AMP or SOURCE.
AMP
DVD
SOURCE
TV
REC
DISC SKIP
OFF
ON
MACRO
LEARN
CLEAR
RE–NAME
2
Press MACRO using a ballpoint pen or
similar object.
“MCR ?” appears in the display window.
y
MACRO
• If you continuously want to clear another function, repeat
step 4.
• Once you clear a learned function, the button reverts to the
factory setting (or to the manufacturer setting if you have
set remote control codes).
5
Press CLEAR to exit the clearing mode.
The remote control returns to the learning mode.
6
Press LEARN again to exit.
Note
If you do not complete each of the following steps within 30
seconds, the macro programming mode will be
automatically canceled. In this case, press MACRO again.
3
Notes
• “C:NG” appears in the display window if clearing was
unsuccessful. In this case, start over from step 4.
• “ERROR” appears in the display window if you press a button
not indicated in the respective step, or if you press more than
one button simultaneously.
Press and hold CLEAR using a ballpoint pen
or similar object, then press the macro
button you want to clear for about 3 seconds.
“C:OK” appears in the display window if clearing
was successful.
DTV
VCR 1
DVR/VCR2
DVD
REC
DISC SKIP
OFF
ON
MACRO
LEARN
CLEAR
RE–NAME
• If you continuously want to clear another function, repeat
step 3.
• Once you clear a programmed function, the button reverts
to the factory setting (or to the manufacturer setting if you
have set remote control codes).
4
Press CLEAR to exit the clearing mode.
The remote control returns to the macro
programming mode.
5
Press MACRO again to exit.
Notes
• “C:NG” appears in the display window if clearing was
unsuccessful. In this case, start over from step 3.
• “ERROR” appears in the display window if you press a button
not indicated in the respective step, or if you press more than
one button simultaneously.
75
ADVANCED
OPERATION
y
01EN00_HTR5890U.book Page 76 Thursday, December 23, 2004 12:39 PM
REMOTE CONTROL FEATURES
Controlling each component
Once you set the appropriate remote control codes, you can use
this remote to control your other components. Note that some
buttons may not correctly operate the selected component. Use
the input selector buttons to select the component you want to
operate. The remote control automatically switches to the
appropriate control mode for that component.
SOURCE
1
2
TRANSMIT
TV VOL
CH
VOL
–
–
–
SYSTEM
POWER
POWER
TV
AV
STANDBY
POWER
TV
A/B/C/D/E
TV MUTE
A
B
INPUT MODE
SLEEP
PHONO
TUNER
CD
MULTI CH IN
V-AUX
CBL/SAT
MD/TAPE
CD-R
DTV
VCR 1
DVR/VCR2
DVD
TV INPUT
LEVEL
SET MENU
TITLE
MENU
6
7
8
PRESET
NIGHT
+
+
CH
VOL
–
–
–
AUDIO
TEST
ON SCREEN
RETURN
DISPLAY
STRAIGHT
EFFECT
HALL
JAZZ
1
2
3
4
MUSIC
TV THTR
MOVIE
5
6
7
8
THX
STANDARD
9
0
FREQ/RDS
EON
EXTD. SUR
+10
ENT.
SOURCE
3
9
TV
0
A
ROCK
ENTERTAIN
AMP
+
TV VOL
PURE DIRECT
ENTER
STEREO
SELECT
MUTE
B
MODE PTY SEEK START
REC
A/B/C/D/E
TV MUTE
4
TV INPUT
MUTE
LEVEL
SET MENU
TITLE
MENU
DISC SKIP
PURE DIRECT
OFF
5
ON
MACRO
LEARN
CLEAR
RE–NAME
NIGHT
AUDIO
ENTER
1
2
3
7
8
9
0
A
B
*1
*2
*3
*4
ON SCREEN
RETURN
DISPLAY
STRAIGHT
DVD player/
VCR
DVD recorder
Cable TV/
TV
Satellite tuner
LD player
CD player
MD recorder/
CD recorder
Tape deck
Tuner
AV POWER
Power *1
Power *1
Power *1
VCR power *3
Power *1
Power *1
Power *1
Power *1
Power *1
TV POWER
TV power *2
TV power *2
TV power *2
Power *1
TV power *2
TV power *2
TV power *2
TV power *2
TV power *2
TV VOL +
TV volume + *2
TV volume + *2
TV volume + *2
Volume +
TV volume +
*2
TV volume + *2
TV volume + *2
TV volume + *2
TV volume + *2
TV VOL –
TV volume –
*2
*2
*2
Volume –
TV volume –
*2
*2
*2
– *2
TV volume – *2
CH +
TV channel + *2
Channel +
Channel +
Channel +
TV channel + *2
TV channel + *2
TV channel + *2
TV channel + *2
PRESET +
CH –
TV channel – *2
Channel –
Channel –
Channel –
TV channel – *2
TV channel – *2
TV channel – *2
TV channel – *2
PRESET –
TV INPUT/
A/B/C/D/E
TV input *2
TV input *2
TV input *2
Input
TV input *2
TV input *2
TV input *2
Direction A/B
A/B/C/D/E
*2
*2
*2
Mute
*2
*2
*2
TV MUTE
4
5
6
TEST
TV mute
TV volume –
TV mute
Title
TV volume –
TV mute
Title
TV mute
TV volume –
TV mute
TV volume –
TV mute
TV volume
TV mute
*2
TITLE
Title
MENU
Menu
Menu
Menu
ENTER
Menu enter
Menu select
Menu select
k
Menu up
Menu up
Menu up
n
Menu down
Menu down
Menu down
l
Menu left
Menu left
Menu left
h
Menu right
Menu right
Menu right
RETURN
Return
Return
Return
Return
1-9, 0, +10
Numeric buttons
Numeric buttons
Numeric buttons
Numeric buttons
Numeric buttons
Numeric buttons
Numeric buttons
ll *4
Search
backward
Search
backward
VCR search
backward *3
VCR search
backward *3
Search
backward
Search
backward
Search
backward
hh *4
Search forward Search forward
VCR search
backward *3
VCR search
backward *3
Search forward Search forward Search forward Search forward
b *4
Skip backward
Chapter/Skip
backward
Skip backward
Skip backward
Direction back
a *4
Skip forward
Chapter/Skip
forward
Skip forward
Skip forward
Direction
forward
REC/
DISC SKIP
Disc skip (player)
Rec (recorder)
Rec
VCR rec *3
VCR rec *3
Disc skip
Rec
Rec
s
Stop
Stop
VCR stop *3
VCR stop *3
Stop
Stop
Stop
Stop
e
Pause
Pause
VCR pause *3
VCR pause *3
Pause
Pause
Pause
Pause
h
Play
Play
VCR play *3
VCR play *3
Play
Play
Play
Play
AUDIO
Audio
DISPLAY
Display
ENTER
Title/Index
TV mute *2
Title
Preset stations (1-8)
Search
backward
Audio
Enter
Display
Display
Enter/recall
Enter/
Chapter/Time
numeric button
Display
Display
Display
Index
Index
This button functions only when the original remote control of the component has a POWER button.
These buttons can operate your TV without switching the input if the remote control code is set in DTV or PHONO. When the remote control
code for your TV is set up in both the DTV and PHONO areas, priority is given to the signal in the DTV area.
These buttons can operate your VCR without switching the input to VCR 1 if the remote control code is set in VCR 1.
For U.S.A. and Canada models, button functions printed above these buttons are not available. They function as described in the table only.
76
01EN00_HTR5890U.book Page 77 Thursday, December 23, 2004 12:39 PM
ZONE 2/ZONE 3
ZONE 2/ZONE 3
This unit allows you to configure a multi-room audio system. The Zone 2 and Zone 3 features enable you to set this unit
to reproduce separate input sources in the main room, second room (Zone 2) and third room (Zone 3). You can control
this unit from the second or third room using the supplied remote control.
Only analog signals are sent to the second and third rooms. Any source you want to listen to in the second or third
room must be connected using the analog (AUDIO L/R) input jacks on this unit.
Zone 2/Zone 3 connections
You need the following additional equipment to use the multi-room functions of this unit:
• An infrared signal receiver in the second and/or third room.
• An infrared emitter in the main room. This emitter transmits the infrared signals from the remote control in the second
and/or third room to the main room (to a CD player or DVD player, for example).
• An amplifier and speakers for the second and/or third room.
y
• Since there are many possible ways to connect and use this unit in a multi-room configuration, we recommend that you consult with
your nearest authorized YAMAHA dealer or service center for the Zone 2/Zone 3 connections that best meet your requirements.
• Some YAMAHA models are able to connect directly to the CONTROL OUT jack on this unit. If you own these products, you may not
need to use an infrared emitter. Up to six YAMAHA components can be connected as shown.
IN
OUT
IN
OUT
CONTROL OUT
This unit
■ System configuration and connection example
Using external amplifiers
To use an external amplifier in Zone 2, set ZONE 2 AMP to “OFF” in SET MENU.
ZONE 3 AUDIO OUT
ZONE 2 AUDIO OUT
SP OUT
Amplifier
Remote control
Remote control
Infrared signal
receiver
Infrared signal
receiver
ADVANCED
OPERATION
Amplifier
MONITOR OUT
CD player
(or other component)
This unit
MAIN
SYSTEM
AUDIO IN
ZONE 2
ZONE 3
Infrared emitter
Main room
REMOTE OUT
Second room
Third room
ZONE 2 REMOTE IN
ZONE 3 REMOTE IN
Notes
77
English
• When not using the main room, turn down the volume of this unit in the main room. Adjust the Zone 2/Zone 3 volume by using the
amplifier in the second/third room.
• To avoid unexpected noise, DO NOT USE the Zone 2/Zone 3 feature with CDs encoded in DTS.
01EN00_HTR5890U.book Page 78 Thursday, December 23, 2004 12:39 PM
ZONE 2/ZONE 3
Using this unit’s internal amplifier
To use this unit’s internal amplifier, set ZONE 2 AMP to ON in SET MENU (see page 64).
R
L
+
–
PRESENCE/ ZONE 2
Second room
This unit
Remote controlling Zone 2/Zone 3
The supplied remote control can be used to control
Zone 2/Zone 3. You can even select the input source and
control components located in the main room directly
from the second/third room regardless of the listening
condition in the main room.
■ To control Zone 2/Zone 3
1
Press SELECT k repeatedly to display
“ZONE 2” or “ZONE 3” in the display window.
SELECT
■ To enable Zone mode on the remote
control
You will be able to switch the remote control mode from
one room to another, and use the input selector,
STANDBY, SYSTEM POWER, MUTE and VOLUME +/
– to control the selected room.
or
1
Repeat steps 1 and 2 of the procedure in
“Setting remote control codes” on page 66.
2
Press SYSTEM POWER to turn Zone 2 or
Zone 3 power on.
2
Press l / h to select “L:AMP”.
3
Press an input selector button to select the
input source you want to listen to in the
second/third room.
The display window shows “2: name of selected
input” or “3: name of selected input” if the remote
control is in the Zone 2/Zone 3 mode.
3
Press ENTER.
“2000” appears in the display window.
A
4
Enter the code number “2001”.
5
Press ENTER to set the number.
“OK” appears in the display window if setting was
successful.
6
Press LEARN to complete the Zone setup.
The remote control will be able to operate this unit
from Zone 2 or Zone 3.
LEARN
78
B
INPUT MODE
SLEEP
PHONO
TUNER
CD
MULTI CH IN
V-AUX
CBL/SAT
MD/TAPE
CD-R
DTV
VCR 1
DVR/VCR2
DVD
Note
Signals input to V-AUX and PHONO jacks cannot be sent
to Zone 2/Zone 3.
01EN00_HTR5890U.book Page 79 Thursday, December 23, 2004 12:39 PM
ZONE 2/ZONE 3
■ Turning this unit to either on or standby
4
You can control the unit from Zone 2 or Zone
3 by using the input selector, STANDBY,
SYSTEM POWER, MUTE and VOLUME +/–
buttons.
SYSTEM
POWER
POWER
STANDBY
POWER
TV
AV
A
B
INPUT MODE
SLEEP
PHONO
TUNER
CD
MULTI CH IN
SELECT
AMP
V-AUX
CBL/SAT
MD/TAPE
CD-R
DTV
VCR 1
DVR/VCR2
DVD
+
+
+
TV VOL
CH
VOL
SOURCE
–
–
–
TV
*
A/B/C/D/E
*
5
TV MUTE
TV INPUT
MUTE
LEVEL
SET MENU
TITLE
MENU
SYSTEM POWER and STANDBY work differently
depending on the selected mode that appears on the
display window.
• When normal, Zone 2 or Zone 3 mode is selected, you
can turn the main unit, Zone 2 or Zone 3 to on/standby
individually.
• When System mode is selected, or when “AMP1” is
selected as the amplifier library (L:AMP) code, you
can turn the main unit, Zone 2 and Zone 3 to on/
standby simultaneously.
PURE DIRECT
LCD display
VOLUME +/– can be used only when OUTPUT VOL is
set to VAR. in SET MENU (see page 64).
Normal mode* Name of component
Press SELECT k/n to exit from the Zone 2/
Zone 3 mode.
Notes
• The source in Zone 2 and the source available for recording are
always the same.
• “ZONE2” or “ZONE3” will appear in the display window only
when k is pressed, and “SYSTM” only when n is pressed.
Turns the main unit
on/standby
Zone 2 mode
“ZONE2” or “2:name
of component”
Turns Zone 2 to on/
standby
Zone 3 mode
“ZONE3” or “3:name
of component”
Turns Zone 3 to on/
standby
System mode “SYSTM”
*
SYSTEM POWER/
STANDBY
Turns everything (the
main unit, Zone 2,
Zone 3) on/standby
“MAIN” appears for a few seconds when SYSTEM POWER
or STANDBY is pressed.
■ Special considerations for DTS software
The DTS signal is a digital bitstream. If you attempt to
send the DTS signal to the second/third room you will
only hear digital noise (that may damage your speakers).
Thus, the following considerations and adjustments need
to be made when playing DTS encoded discs.
For CDs encoded in DTS
To avoid unexpected noise, DO NOT USE the Zone 2/
Zone 3 feature with CDs encoded in DTS.
79
ADVANCED
OPERATION
For DVDs encoded with DTS
Only 2 channel analog audio signals may be sent to the
second/third room.
Use the disc menu to set the DVD player’s mixed 2channel left and right audio outputs to the PCM or Dolby
Digital soundtrack.
01EN00_HTR5890U.book Page 80 Thursday, December 23, 2004 12:39 PM
EDITING SOUND FIELD PARAMETERS
EDITING SOUND FIELD PARAMETERS
What is a sound field?
A significant factor that creates the rich, full tones of a live
instrument are the multiple reflections from the walls of
the room. In addition to making the sound “live”, these
reflections enable us to tell where the player is situated,
and the size and shape of the room in which we are sitting.
Changing parameter settings
You can enjoy good quality sound with the factory preset
parameters. Although you do not have to change the initial
settings, you can change some of the parameters to better
suit the input source or your listening room.
TV MUTE
SYSTEM
■ Elements of a sound field
Reverberations
These are caused by reflections from more than one
surface — walls, ceiling, the back of the room — so
numerous that they merge together to form a continuous
sonic “afterglow”. They are non-directional, and lessen
the clarity of the direct sound.
AV
STANDBY
POWER
A
B
INPUT MODE
SLEEP
PHONO
TUNER
CD
MULTI CH IN
V-AUX
CBL/SAT
MD/TAPE
CD-R
TV INPUT
MUTE
LEVEL
SET MENU
TITLE
MENU
PURE DIRECT
NIGHT
AUDIO
TEST
ON SCREEN
RETURN
DTV
VCR 1
DVR/VCR2
+
JAZZ
1
2
3
4
ENTERTAIN
MUSIC
TV THTR
MOVIE
5
6
7
–
THX
STANDARD
9
0
FREQ/RDS
EON
VOL
–
–
8
3
EXTD. SUR
+10
ENT.
MODE PTY SEEK START
REC
+
CH
ROCK
DVD
1
SOURCE
TV VOL
4,5
2
EFFECT
HALL
AMP
+
STRAIGHT
DISPLAY
STEREO
SELECT
TV
DISC SKIP
OFF
ON
MACRO
LEARN
CLEAR
RE–NAME
A/B/C/D/E
1
Set AMP/SOURCE/TV to AMP.
AMP
SOURCE
TV
2
Direct sound, early reflections and subsequent
reverberation taken together help us to determine the
subjective size and shape of the room, and it is this
information that the digital sound field processor
reproduces in order to create sound fields.
If you could create the appropriate early reflections and
subsequent reverberations in your listening room, you
would be able to create your own listening environment.
The acoustics in your room could be changed to those of a
concert hall, a dance floor, or virtually any size room at
all. This ability to create sound fields at will is exactly
what YAMAHA has done with the digital sound field
processor.
POWER
TV
ENTER
In any environment, in addition to the direct sound coming
straight to our ears from the player’s instrument, there are
two distinct types of sound reflections that combine to
make up the sound field:
Early reflections
Reflected sounds reach our ears extremely rapidly (50 ms
– 100 ms after the direct sound), after reflecting from one
surface only — for example, from the ceiling or a wall.
Early reflections help add clarity to the direct sound.
POWER
Turn on the video monitor and press ON
SCREEN repeatedly to select the full display
mode.
ON SCREEN
DISPLAY
3
Select the sound field program you want to
adjust.
STEREO
HALL
JAZZ
1
2
3
4
ENTERTAIN
MUSIC
TV THTR
MOVIE
5
6
7
THX
STANDARD
9
0
Program No.
ROCK
8
EXTD. SUR
+10
ENT.
Program name
P04 ROCK CONCERT
Cursor
DSP LEVEL;;;;0dB
> INIT.DLY;;;;15ms
ROOM SIZE;;;;1.0
LIVENESS;;;;;;;5
REV.TIME;;;;1.6s
REV.DELAY;;120ms
Parameters
80
Parameter values
01EN00_HTR5890U.book Page 81 Thursday, December 23, 2004 12:39 PM
EDITING SOUND FIELD PARAMETERS
4
Press k / n to select the
parameters.
ENTER
5
6
Press l / h to change
the parameter value.
When you set a parameter to a
value other than the factory
preset, an asterisk mark (*)
appears by the parameter name
on the video monitor.
ENTER
Repeat steps 3 through 5 as necessary to
change other program parameters.
Notes
• The available parameters may be displayed on more than one
OSD page for some of the programs. To scroll through pages,
press k / n.
• You cannot change parameter values when MEMORY GUARD
is set to “ON”. If you want to change the parameter values, set
MEMORY GUARD to “OFF” (see page 63).
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is set in the standby
mode, the power cord is disconnected from the AC
outlet, or the power supply is temporarily cut due to
power failure. However, if the power is cut for more
than one week, the parameter values will return to the
factory settings. If this happens, edit the parameter
value again.
■ Resetting parameters to the factory
values
To reset a certain parameter
Select the parameter you want to reset, then press l / h
repeatedly until the asterisk mark (*) next to the parameter
name disappears from the video monitor.
ADDITIONAL
INFORMATION
To reset all parameters
Use PARAM.INI (see page 63).
81
01EN00_HTR5890U.book Page 82 Thursday, December 23, 2004 12:39 PM
SOUND FIELD PARAMETER DESCRIPTIONS
SOUND FIELD PARAMETER DESCRIPTIONS
You can adjust the values of certain digital sound field parameters so the sound fields are recreated accurately in your
listening room. Not all of the following parameters are found in every program.
■ DSP LEVEL
Function:
Description:
Control range:
This parameter adjusts the level of all the DSP effect sounds within a narrow range.
Depending on the acoustics of you listening room, you may want to increase or decrease the DSP effect
level relative to the level of the direct sound.
–6 dB – +3 dB
■ INIT. DLY/P. INIT. DLY (Initial delay)
Function:
Description:
Control range:
This parameter changes the apparent distance the sound source is from the reflection face by adjusting
the delay between the direct sound and the first reflection heard by the listener.
The smaller the value, the closer the reflection face seems to the sound source. The larger the value, the
farther it seems. For a small room, set to a small value. For a large room, set to a large value.
1 – 99 msec
Source Sound
Time
INIT. DLY
Level
Level
Level
Early
Reflections
INIT. DLY
Time
INIT. DLY
Time
Sound Source
Reflection Face
Small value = 1 ms
Large value = 99 ms
■ ROOM SIZE/P. ROOM SIZE (Room size)
Function:
Description:
Control range:
This parameter adjusts the apparent size of the surround sound field. The larger the value, the larger the
surround sound field becomes.
As the sound is repeatedly reflected around a room, the larger the hall is, the longer the time between
the original reflected sound and the subsequent reflections. By controlling the time between the
reflected sounds, you can change the apparent size of the virtual venue. Changing this parameter from
one to two, doubles the apparent length of the room.
0.1 – 2.0
Time
Early
Reflections
Time
Level
Level
Level
Source Sound
Time
Sound Source
Small value = 0.1
82
Large value = 2.0
01EN00_HTR5890U.book Page 83 Thursday, December 23, 2004 12:39 PM
SOUND FIELD PARAMETER DESCRIPTIONS
■ LIVENESS
Function:
Description:
Control range:
This parameter adjusts the reflectivity of the virtual walls in the hall by changing the rate at which the
early reflections decay.
The early reflections of a source sound decay much faster in a room with acoustically absorbent wall
surfaces than in one which has highly reflective surfaces. A room with acoustically absorbent surfaces
is referred to as “dead”, while a room with highly reflective surfaces is referred to as “live”. The
LIVENESS parameter lets you adjust the early reflection decay rate, and thus the “liveness” of the
room.
0 – 10
Source Sound
Time
Small Reflected
Sound
Small value = 0
Level
Dead
Level
Level
Live
Time
Time
Large Reflected
Sound
Large value = 10
■ S. INIT. DLY (Surround initial delay)
Function:
This parameter adjusts the delay between the direct sound and the first reflection on the surround side of
the sound field. You can only adjust this parameter when at least two front channels and two surround
channels are used.
Control Range: 1 – 49 msec
■ S. ROOM SIZE (Surround room size)
Function:
This parameter adjusts the apparent size of the surround sound field.
Control Range: 0.1 – 2.0
■ S. LIVENESS (Surround liveness)
Function:
This parameter adjusts the apparent reflectivity of the virtual walls in the surround sound field.
Control Range: 0 – 10
■ SB INI. DLY (Surround back initial delay)
Function:
This parameter adjusts the delay between the direct sound and the first reflection in the surround back
sound field.
Control Range: 1 – 49 msec
■ SB ROOM SIZE (Surround back room size)
Function:
This parameter adjusts the apparent size of the surround back sound field.
Control Range: 0.1 – 2.0
ADDITIONAL
INFORMATION
■ SB LIVENESS (Surround back liveness)
Function:
This parameter adjusts the apparent reflectivity of the virtual wall in the surround back sound field.
Control Range: 0 – 10
83
01EN00_HTR5890U.book Page 84 Thursday, December 23, 2004 12:39 PM
SOUND FIELD PARAMETER DESCRIPTIONS
■ REV.TIME (Reverberation time)
Function:
This parameter adjusts the amount of time it takes for the dense, subsequent reverberation sound to
decay by 60 dB (at 1 kHz). This changes the apparent size of the acoustic environment over an
extremely wide range.
Description:
The longer the reverberation time, the more “live” the listening room environment seems. The shorter
the reverberation time, the more “dead” the listening room environment seems.
Control Range: 1.0 – 5.0 sec
Source Sound
Reverberation
Reverberation
Early Reflections
60 dB
60 dB
REV.TIME
Sound Source
REV.TIME
Short
Reverberation
60 dB
REV.TIME
Long
Reverberation
Large value = 5.0 s
Small value = 1.0 s
■ REV.DELAY (Reverberation delay)
This parameter adjusts the time difference between the beginning of the direct sound and the beginning
of the reverberation sound.
Description:
The larger the value, the later the reverberation sound begins. A later reverberation sound makes you
feel like you are in a larger acoustic environment.
Control Range: 0 – 250 msec
Level
Function:
Source Sound
(dB)
60 dB
Reverberation
Time
REV.DELAY
REV.TIME
■ REV. LEVEL (Reverberation level)
Function:
This parameter adjusts the volume of the reverberation sound.
Description:
The larger the value, the stronger the reverberation becomes.
Control Range: 0 – 100%
Level
Source Sound
REV. LEVEL
Time
84
01EN00_HTR5890U.book Page 85 Thursday, December 23, 2004 12:39 PM
SOUND FIELD PARAMETER DESCRIPTIONS
■ DIALG.LIFT (Dialog lift)
Function:
Description:
Choices:
This parameter adjusts the height of the front and center channel sounds by assigning some of the front
and center channel elements to the presence speakers.
The larger the parameter, the higher the position of the front and center channel sound.
0/1/2/3/4/5, initial setting is 3.
For 7ch Stereo
Function:
These parameters adjust the volume level for each channel in 7-channel stereo mode.
Control Range: 0 – 100%
■ CT LEVEL (Center level)
■ SL LEVEL (Surround left level)
■ SR LEVEL (Surround right level)
■ SB LEVEL (Surround back level)
■ PL LEVEL (Presence left level)
■ PR LEVEL (Presence right level)
For PRO LOGIC IIx Music and PRO LOGIC II Music
■ PANORAMA
Function:
Choices:
Extends the front stereo image to include the surround speakers for a wraparound effect.
OFF/ON, initial setting is OFF.
■ DIMENSION
Function:
Control range:
Gradually adjusts the sound field either towards the front or towards the rear.
–3 (towards the rear) to +3 (towards the front), initial setting is STD (standard).
■ CENTER WIDTH
Function:
Control range:
Adjusts the center image from all three front speakers to varying degrees. A larger value adjusts the
center image towards the front left and right speakers.
0 (center channel sound is output only from center speaker) to 7 (center channel sound is output only
from front left and right speakers), initial setting is 3.
For PRO LOGIC IIx Music, Movie and Game
■ PLII/PLIIx (Pro Logic II/Pro Logic IIx)
Function:
Choices:
Switches the type of Pro Logic decoding to be used. PLII decoding creates 5.1-channel sound from 2channel sources. PLIIx decoding creates 6.1/7.1-channel sound from 2-channel sources.
PLII, PLIIx
ADDITIONAL
INFORMATION
For DTS Neo:6 Music
■ C. IMAGE (Center image)
Function:
Control range:
This parameter adjusts the center image from all three front speakers to varying degrees.
0 – 1.0
For THX Cinema
■ DEC (2ch Decoder Select)
Function:
Choices:
Selects the decoder used to playback 2-channel sources using THX Cinema.
PRO LOGIC / PLII Movie / Neo:6 Cinema
85
01EN00_HTR5890U.book Page 86 Thursday, December 23, 2004 12:39 PM
TROUBLESHOOTING
TROUBLESHOOTING
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below
or if the instruction below does not help, set this unit to the standby mode, disconnect the power cord, and contact the
nearest authorized YAMAHA dealer or service center.
■ General
Problem
This unit fails to turn
on when STANDBY/
ON (or SYSTEM
POWER) is pressed,
or enters in the
standby mode soon
after the power has
been turned on.
On-screen display
does not appear.
No sound
No picture
86
Cause
Remedy
Refer to
page
The power cord is not connected or the
plug is not completely inserted.
Connect the power cord firmly.
—
The impedance setting is incorrect.
Set the impedance to match your speakers.
25
The protection circuitry has been
activated.
Make sure all speaker wire connections on this unit
and on all speakers are secure and that the wire for
each connection does not touch anything other than
its respective connection.
This unit has been exposed to a strong
external electric shock (such as lightning
and strong static electricity).
Set this unit in the standby mode, disconnect the
power cord, plug it back in after 30 seconds, then use
it normally.
—
The setting for the on-screen display is set
to “DISPLAY OFF”.
Select the full or short display mode.
50
GRAY BACK in the SET MENU is set to
“OFF”, and no video signal is currently
being received.
Set GRAY BACK to “AUTO” to always show the
OSD.
62
Incorrect input or output cable
connections.
Connect the cables properly. If the problem persists,
the cables may be defective.
The optimizer microphone is connected.
Disconnect the optimizer microphone.
—
The input mode is set to “DTS” or
“ANALOG”.
Set the input mode to “AUTO”.
40
No appropriate input source has been
selected.
Select an appropriate input source with INPUT,
MULTI CH INPUT or the input selector buttons.
33
Speaker connections are not secure.
Secure the connections.
13
The front speakers to be used have not
been selected properly.
Select the front speakers with SPEAKERS A and/or
B.
33
The volume is turned down.
Turn up the volume.
—
The sound is muted.
Press MUTE or any operation buttons of this unit to
cancel a mute and adjust the volume.
35
The input mode is set to “ANALOG”
while playing a source encoded with a
DTS signal.
Set the input mode to “AUTO” or “DTS”.
40
The signals this unit cannot reproduce are
being received from a source component
e.g.: a CD-ROM.
Play a source whose signals this unit can reproduce.
—
The output and input for the picture are
connected to different types of video
jacks.
Turn on the video conversion function.
63
13–16
18–21
01EN00_HTR5890U.book Page 87 Thursday, December 23, 2004 12:39 PM
TROUBLESHOOTING
Problem
Cause
Remedy
Refer to
page
25
Check the speaker wires are not touching each other
and then turn this unit back on.
—
The sleep timer has turned the unit off.
Turn on the power, and play the source again.
—
The sound is muted.
Press MUTE to cancel a mute.
35
Only the speaker on
one side can be
heard.
Incorrect cable connections.
Connect the cables properly. If the problem persists,
the cables may be defective.
13
Incorrect balance settings in the SET
MENU.
Adjust the SPEAKER LEVEL settings.
57
Only the center
speaker outputs
substantial sound.
When playing a monaural source with a
CINEMA DSP program, the source signal
is directed to the center channel, and the
front and surround speakers output effect
sounds.
No sound from the
effect speakers.
The sound field programs are turned off.
Press STRAIGHT/EFFECT to turn them on.
39
You are using a source or program
combination that does not output sound
from all channels.
Try another sound field program.
34
No sound from the
center speaker.
The output level of the center speaker is
set to minimum.
Raise the level of the center speaker.
57
CENTER SP in the SET MENU is set to
“NONE”.
Select the appropriate setting for the center speaker.
55
One of the HiFi DSP programs (except for
7ch Stereo) has been selected.
Try another sound field program.
34
The output level of the surround speakers
is set to minimum.
Raise the output level of the surround speakers.
57
SURR L/R SP in the SET MENU is set to
“NONE”.
Select the appropriate setting for the surround left and
right speakers.
56
A monaural or stereo source is being
played with STRAIGHT.
Press STRAIGHT/EFFECT to turn on the sound
fields.
—
Presence speakers are selected.
Select surround back speakers in PR/SBch SELECT.
60
SURR L/R SP in the SET MENU is set to
“NONE”.
If the surround left and right speakers are set to
“NONE”, surround back speakers are automatically
set to “NONE”. Select the appropriate setting for the
surround left and right speakers.
56
SURR B L/R SP in the SET MENU is set
to “NONE”.
Select “SMLx1”, “SMLx2”, “LRGx1” or “LRGx2”.
56
LFE/BASS OUT in the SET MENU is set
to “FRNT” when a Dolby Digital or DTS
signal is being played.
Select “SWFR” or “BOTH”.
56
LFE/BASS OUT in the SET MENU is set
to “SWFR” or “FRNT” when a 2-channel
source is being played.
Select “BOTH”.
56
No sound from the
surround speakers.
No sound from the
surround back
speakers.
No sound from the
subwoofer.
The protection circuitry has been activated
because of a short circuit, etc.
ADDITIONAL
INFORMATION
Check that the impedance selector setting is correct.
The sound suddenly
goes off.
The source does not contain low bass
signals.
87
01EN00_HTR5890U.book Page 88 Thursday, December 23, 2004 12:39 PM
TROUBLESHOOTING
Problem
Cause
Remedy
Refer to
page
Dolby Digital or DTS
sources cannot be
played. (Dolby Digital
or DTS indicator in
the front panel
display does not light
up.)
The connected component is not set to
output Dolby Digital or DTS digital
signals.
Make an appropriate setting following the operations
instructions for your component.
—
The input mode is set to “ANALOG”.
Set the input mode to “AUTO” or “DTS”.
40
A “humming” sound
can be heard.
Incorrect cable connections.
Firmly connect the audio plugs. If the problem
persists, the cables may be defective.
—
No connection from the turntable to the
GND terminal.
Connect the grounding cord of your turnable to the
GND terminal of this unit.
21
The volume level is
low while playing a
record.
The record is being played on a turntable
with an MC cartridge.
The turntable should be connected to this unit through
an MC-head amplifier.
21
The volume level
cannot be increased,
or the sound is
distorted.
The component connected to the OUT
(REC) jacks of this unit is turned off.
Turn on the power to the component.
—
The sound effect
cannot be recorded.
It is not possible to record the sound effect
with a recording component.
A source cannot be
recorded by a digital
recording component
connected to this
DIGITAL OUTPUT
jack.
The source component is not connected to
this unit’s DIGITAL INPUT jacks.
A source cannot be
recorded by an
analog component
connected to the
AUDIO OUT jacks.
Connect the source component to the DIGITAL
INPUT jacks.
18–21
The source component is not connected to
this unit’s analog AUDIO IN jacks.
Connect the source component to the analog AUDIO
IN jacks.
18–21
The sound field
parameters and some
other settings on this
unit cannot be
changed.
MEMORY GUARD in the SET MENU is
set to “ON”.
Select “OFF”.
63
This unit does not
operate properly.
The internal microcomputer has been
frozen by an external electric shock (such
as lightning or excessive static electricity)
or by a power supply with low voltage.
Disconnect the AC power cord from the outlet and
then plug it in again after about 30 seconds.
—
“CHECK SP WIRES”
appears in the front
panel display.
Speaker cables are short circuited.
Make sure all speaker cables are connected correctly.
13
88
Some components cannot record Dolby
Digital or DTS sources.
01EN00_HTR5890U.book Page 89 Thursday, December 23, 2004 12:39 PM
TROUBLESHOOTING
Problem
Cause
Remedy
Refer to
page
Move this unit further away from such equipment.
—
The OSD may be disturbed when
displaying OSD through component video
connections.
Select OFF in CMPNT OSD.
63
The internal temperature becomes too
high and the overheat protection circuitry
has been activated.
Wait for about 1 hour until this unit cools down and
then turn it back on.
—
There is noise
interference from
digital or radiofrequency equipment,
or this unit.
This unit is too close to the digital or
radio-frequency equipment.
The picture is
disturbed.
The video source uses scrambled or
encoded signals to prevent dubbing.
There is noise when
the OSD is displayed.
This unit suddenly
turns into the standby
mode.
■ Tuner
Problem
AM
Remedy
Refer to
page
Check the antenna connections.
Try using a high-quality directional FM
antenna.
23
Use the manual tuning method.
41
There is distortion, and
clear reception cannot
be obtained even with a
good FM antenna.
There is multipath interference.
Adjust the antenna position to eliminate
multipath interference.
—
The desired station
cannot be tuned in with
the automatic tuning
method.
The signal is too weak.
Use a high-quality directional FM antenna.
23
Use the manual tuning method.
41
Previously preset
stations can no longer
be tuned in.
This unit has been disconnected for a
long period.
Preset the stations again.
42
The desired station
cannot be tuned in with
the automatic tuning
method.
The signal is weak or the antenna
connections are loose.
Tighten the AM loop antenna connections
and orient it for best reception.
—
Use the manual tuning method.
41
There are continuous
crackling and hissing
noises.
Noises result from lightning,
fluorescent lamps, motors,
thermostats and other electrical
equipment.
Use an outdoor antenna and a ground wire.
This will help somewhat, but it is difficult to
eliminate all noise.
—
There are buzzing and
whining noises.
A TV set is being used nearby.
Move this unit away from the TV.
—
ADDITIONAL
INFORMATION
The characteristics of FM stereo
broadcasts may cause this problem
when the transmitter is too far away
or the antenna input is poor.
FM stereo reception is
noisy.
FM
Cause
89
01EN00_HTR5890U.book Page 90 Thursday, December 23, 2004 12:39 PM
TROUBLESHOOTING
■ Remote control
Problem
The remote control
does not work nor
function properly.
The remote control
does not “learn” new
functions.
90
Cause
Remedy
Refer to
page
Wrong distance or angle.
The remote control will function within a maximum
range of 6 m (20 ft) and no more than 30 degrees offaxis from the front panel.
8
Direct sunlight or lighting (from an
inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this
unit.
Reposition this unit.
—
The batteries are weak.
Replace all batteries.
3
AMP/SOURCE/TV is set incorrectly
Set AMP/SOURCE/TV correctly.
When operating this unit, set it to the AMP position.
When operating the component selected by the input
selector button, set it to the SOURCE position.
When operating the TV set in the DTV or PHONO
area, set it to the TV position.
—
The remote control code was not correctly
set.
Set the remote control code correctly.
66
Try setting another code of the same manufacturer.
66
Even if the remote control code is
correctly set, there are some models that
do not respond to the remote control.
Program the necessary functions independently into
the programmable buttons using the Learn feature.
68
The batteries of this remote control and/or
the other remote control are too weak.
Replace the batteries.
3
The distance between the two remote
controls is too much or too little.
Place the remote controls at the proper distance.
68
The signal coding or modulation of the
other remote control is not compatible
with this remote control.
Learning is not possible.
—
Memory capacity is full.
Delete other unnecessary functions to make room for
the new functions.
73
01EN00_HTR5890U.book Page 91 Thursday, December 23, 2004 12:39 PM
GLOSSARY
GLOSSARY
Audio formats
■ Dolby Digital
Dolby Digital is a digital surround sound system that gives
you completely independent multi-channel audio. It
provides 5 full-range audio channels; 3 front channels
(left, center, and right), and 2 surround stereo channels.
An additional channel especially for bass effects, called
LFE (low frequency effect) is also provided giving the
system a total of 5.1-channels (LFE is counted as a 0.1
channel). By using 2-channel stereo for the surround
speakers, more accurate moving sound effects and
surround sound environment are possible than with Dolby
Surround. The wide dynamic range (maximum to
minimum volume) reproduced by the 5 full-range
channels and the precise sound orientation generated
using digital sound processing provide listeners with a
previously unheard of excitement and realism.
■ Dolby Digital EX
Dolby Digital EX creates 6 full-bandwidth output
channels from 5.1-channel sources. This is done by using
a matrix decoder that derives 3 surround channels from
the 2 in the original recording. For best results, Dolby
Digital EX should be used with movie sound tracks
recorded with Dolby Digital Surround EX. With this
additional channel, you can experience more dynamic and
realistic moving sound especially with scenes that have
“flyover” and “fly-around” effects.
■ Dolby Pro Logic II
Dolby Pro Logic II is an improved technique used to
decode vast numbers of existing Dolby Surround
software. This new technology enables a 5-channel
playback with 2 front left and right channels, 1 center
channel, and 2 surround left and right channels (instead of
only 1 surround channel for conventional Pro Logic
technology). Music and Game modes are also available
for 2-channel sources in addition to the Movie mode.
■ Dolby Pro Logic IIx
Dolby Surround uses a 4 channel analog recording system
to reproduce realistic and dynamic sound effects: 2 front
left and right channels (stereo), a center channel for dialog
(monaural), and a surround channel for special sound
effects (monaural). The surround channel reproduces
sound within a narrow frequency range.
Dolby Surround is widely used with nearly all video tapes
and laser discs, and in many TV and cable broadcasts as
well. The Dolby Pro Logic decoder built into this unit
employs a digital signal processing system that
automatically stabilizes the volume on each channel to
enhance moving sound effects and directionality.
■ DTS 96/24
DTS 96/24 offers an unprecedented level of audio quality
for multi-channel sound on DVD-Video, and is fully
backward-compatible with all DTS decoders. “96” refers
to a 96 kHz sampling rate (compared to the typical 48 kHz
sampling rate). “24” refers to 24-bit word length. DTS 96/
24 offers sound quality transparent to the original 96/24
master, and 96/24 5.1-channel sound with full-quality fullmotion video for music programs and motion picture
soundtracks on DVD-video.
■ DTS (Digital Theater Systems)
Digital Surround
DTS digital surround was developed to replace the analog
soundtracks of movies with a 6-channel digital sound
track, and is now rapidly gaining popularity in movie
theaters around the world. Digital Theater Systems Inc.
has developed a home theater system so that you can
enjoy the depth of sound and natural spatial representation
of DTS digital surround in your home. This system
produces practically distortion-free 6-channel sound
(technically, left, right and center channels, 2 surround
channels, plus an LFE 0.1 channel as a subwoofer, for a
total of 5.1-channels). This unit incorporates a DTS-ES
decoder that enables 6.1- channel reproduction by adding
a surround back channel to the existing 5.1-channel
format.
■ Neo:6
Neo:6 decodes conventional 2-channel sources for 6
channel playback by. It enables playback with the fullrange channels with higher separation comparable to
digital discrete signal playback. Two modes are available;
“Music mode” for playing music sources and “Cinema
mode” for movies.
91
ADDITIONAL
INFORMATION
Dolby Pro Logic IIx is a new technology enabling 6.1 or
7.1 multi-channel playback from 2-channel or multichannel sources. There is a Music mode for music, a
Movie mode for movies and a Game mode for games.
■ Dolby Surround
01EN00_HTR5890U.book Page 92 Thursday, December 23, 2004 12:39 PM
GLOSSARY
■ PCM (Linear PCM)
Linear PCM is a signal format under which an analog
audio signal is digitized, recorded and transmitted without
using any compression. This is used as a method of
recording CDs and DVD audio. The PCM system uses a
technique for sampling the size of the analog signal per
very small unit of time. Standing for “pulse code
modulation”, the analog signal is encoded as pulses and
then modulated for recording.
Sound field programs
■ CINEMA DSP
Since the Dolby Surround and DTS systems were
originally designed for use in movie theaters, their effect
is best felt in a theater having many speakers and designed
for acoustic effects. Since home conditions, such as room
size, wall material, number of speakers, and so on, can
differ so widely, it’s inevitable that there are differences in
the sound heard. Based on a wealth of actually measured
data, YAMAHA CINEMA DSP uses YAMAHA original
sound field technology to combine Dolby Pro Logic,
Dolby Digital and DTS systems to provide the visual and
audio experience of a movie theater in the listening room
of your own home.
■ SILENT CINEMA
YAMAHA has developed a natural, realistic sound effect
DSP algorithm for headphones.
Parameters for headphones have been set for each sound
field so that accurate representations of all the sound field
programs can be enjoyed on headphones.
■ Virtual CINEMA DSP
YAMAHA has developed a Virtual CINEMA DSP
algorithm that allows you to enjoy DSP sound field
surround effects without any surround speakers by using
virtual surround speakers.
It is even possible to enjoy Virtual CINEMA DSP using a
minimal two-speaker system that does not include a center
speaker.
92
01EN00_HTR5890U.book Page 93 Thursday, December 23, 2004 12:39 PM
GLOSSARY
Audio information
■ ITU-R
ITU-R is the radio communication sector of the ITU
(International Telecommunication Union). ITU-R
recommends a standard speaker placement which is used
in many critical listening rooms, such as mastering
studios.
■ LFE 0.1 channel
This channel is for the reproduction of low bass signals.
The frequency range for this channel is 20 Hz to 120 Hz.
This channel is counted as 0.1 because it only enforces a
low frequency range compared to the full-range
reproduced by the other 5/6 channels in Dolby Digital or
DTS 5.1/6.1-channel systems.
■ Sampling frequency and number of
quantized bits
When digitizing an analog audio signal, the number of
times the signal is sampled per second is called the
sampling frequency, while the degree of fineness when
converting the sound level into a numeric value is called
the number of quantized bits.
The range of rates that can be played back is determined
based on the sampling rate, while the dynamic range
representing the sound level difference is determined by
the number of quantized bits. In principle, the higher the
sampling frequency, the wider the range of frequencies
that can be played back, and the higher the number of
quantized bits, the more finely the sound level can be
reproduced.
■ THX Cinema processing
THX is an exclusive set of standards and technologies
established by the world-renowned film production
company, Lucasfilm Ltd. THX grew from George Lucas’
personal desire to make your experience of the film
soundtrack, in both movie theatres and in your home
theatre, as faithful as possible to what the director
intended.
Movie soundtracks are mixed in special movie theatres
called dubbing stages and are designed to be played back
in movie theatres with similar equipment and conditions.
This same soundtrack is then transferred directly onto
Laserdisc, VHS tape, DVD, etc., and is not changed for
playback in a small home theatre environment.
THX engineers developed patented technologies to
accurately translate the sound from the movie theatre
environment into the home, correcting the tonal and
spatial errors that occur. On this product, when the THX
indicator is on, THX features are automatically added in
Cinema modes (e.g. THX Cinema, THX Surround EX).
Adaptive decorrelation
In a movie theatre, a large number of surround speakers
help create an enveloping surround sound experience, but
in a home theatre there are usually only two speakers. This
can make the surround speakers sound like headphones
that lack spaciousness and envelopment. The surround
sounds will also collapse into the closest speaker as you
move away from the middle seating position. Adaptive
decorrelation slightly changes one surround channel's time
and phase relationship with respect to the other surround
channel. This expands the listening position and creates –
with only two speakers – the same spacious surround
experience as in a movie theatre.
Re-equalization
The tonal balance of a film soundtrack will be excessively
bright and harsh when played back over audio equipment
in the home because film soundtracks were designed to be
played back in large movie theatres using very different
professional equipment. Re-equalization restores the
correct tonal balance for watching a movie soundtrack in a
small home environment.
93
ADDITIONAL
INFORMATION
Timbre matching
The human ear changes our perception of sound
depending on the direction from which it is coming. In a
movie theatre, there is an array of surround speakers so
that the surround information is all around you. In a home
theatre, you use only two speakers located to the side of
your head. The timbre matching feature filters the
information going to the surround speakers so that they
more closely match the tonal characteristics of the sound
coming from the front speakers. This ensures seamless
panning between the front and surround speakers.
01EN00_HTR5890U.book Page 94 Thursday, December 23, 2004 12:39 PM
GLOSSARY
■ THX Select
Before any home theatre component can be THX Select
certified, it must incorporate pass a rigorous series of
quality and performance tests. Only then can a product
feature the THX Select logo, which is your guarantee that
the Home Theatre products you purchase will give you
superb performance for many years to come. THX Select
requirements cover every aspect of the product including
power amplifier and pre-amplifier performance and
operation, and hundreds of other parameters in both the
digital and analog domain.
■ THX Surround EX
THX Surround EX - Dolby Digital Surround EX is a joint
development of Dolby Laboratories and the THX Ltd.
In a movie theater, film soundtracks that have been
encoded with Dolby Digital Surround EX technology are
able to reproduce an extra channel which has been added
during the mixing of the program. This channel, called
Surround Back, places sounds behind the listener in
addition to the currently available front left, front center,
front right, surround right, surround left and subwoofer
channels. This additional channel provides the opportunity
for more detailed imaging behind the listener and brings
more depth, spacious ambience and sound localization
than ever before.
Movies that were created using the Dolby Digital
Surround EX technology, when released into the home
consumer market may exhibit wording to that effect on the
packaging. A list of movies created using this technology
can be found on the Dolby web site at www.dolby.com. A
list of available DVD software titles encoded with this
technology can be found at www.thx.com.
Only receiver and controller products bearing the THX
Surround EX logo, when in the THX Surround EX mode,
faithfully reproduce this new technology in the home.
This product may also engage the THX Surround EX
mode during the playback of 5.1 channel material that is
not Dolby Digital Surround EX encoded. In such cases the
information delivered to the Surround Back channel will
be program dependent and may or may not be pleasing
depending on the particular soundtrack and the tastes of
the individual listener.
94
Video signal information
■ Component video signal
With the component video signal system, the video signal
is separated into the Y signal for the luminance and the PB
and PR signals for the chrominance. Color can be
reproduced more faithfully with this system because each
of these signals is independent. The component signal is
also called the “color difference signal” because the
luminance signal is subtracted from the color signal.
A monitor with component input jacks is required in order
to use the component signal for output.
■ Composite video signal
With the composite video signal system, the video signal
is composed of three basic elements of a video picture;
color, brightness and synchronization data. A composite
video jack on a video component transmits these three
elements combined.
■ S-video signal
With the S-video signal system, the video signal normally
transmitted using a pin cable is separated and transmitted
as the Y signal for the luminance and the C signal for the
chrominance through the S-video cable. Using the S
VIDEO jack eliminates video signal transmission loss and
allows recording and playback of even more beautiful
images.
01EN00_HTR5890U.book Page 95 Thursday, December 23, 2004 12:39 PM
SPECIFICATIONS
SPECIFICATIONS
AUDIO SECTION
VIDEO SECTION
• Minimum RMS Output Power for Front, Center, Surround,
Surround back
20 Hz to 20 kHz, 0.04% THD, 8 Ω ..................................... 120 W
1 kHz, 0.7% THD, 8 Ω ........................................................ 140 W
• Video Signal Type .................................................................... NTSC
• Dynamic Power (IHF)
8/6/4/2 Ω .........................................................155/195/250/330 W
• Signal to Noise Ratio .............................................................. 60 dB
• Frequency Response (MONITOR OUT)
Composite, S-video ................................... 5 Hz to 10 MHz, –3 dB
Component ............................................... 5 Hz to 60 MHz, –3 dB
• Damping Factor (IHF)
20 Hz to 20 kHz, 8 Ω................................................... 140 or more
FM SECTION
• Frequency Response
CD to Front L/R ..................................... 10 Hz to 100 kHz, –3 dB
• Usable Sensitivity (IHF) ....................................... 1.0 µV (11.2 dBf)
• Total Harmonic Distortion
PHONO to REC OUT (20 Hz to 20 kHz, 1 V) .................. 0.02%
CD, etc. to Front L/R (20 Hz to 20 kHz, 60 W, 8 Ω) .......... 0.04%
• Signal to Noise Ratio (IHF-A Network)
PHONO (5 mV) to Front L/R................................................ 86 dB
CD (250 mV) to Front L/R, Effect Off................................ 100 dB
• Tuning Range ..................................................... 87.5 to 107.9 MHz
• Signal to Noise Ratio (IHF)
Mono/Stereo .............................................................. 76 dB/70 dB
• Harmonic Distortion (1 kHz)
Mono/Stereo ................................................................ 0.2%/0.3%
• Stereo Separation (1 kHz) ....................................................... 42 dB
• Frequency Response ........................... 20 Hz to 15 kHz +0.5, –2 dB
• Residual Noise (IHF-A Network)
Front L/R ............................................................... 150 µV or less
AM SECTION
• Channel Separation (1 kHz/10 kHz)
PHONO (terminated) to Front L/R ........................... 60 dB/55 dB
CD (5.1 kΩ terminated) to Front L/R ....................... 60 dB/45 dB
• Usable Sensitivity ............................................................. 300 µV/m
• Tone Control (Front L/R)
BASS Boost/Cut ....................................................... ±6 dB/50 Hz
BASS Turnover Frequency.................................................. 350 Hz
TREBLE Boost/Cut ................................................ ±6 dB/20 kHz
TREBLE Turnover Frequency........................................... 3.5 kHz
• Phones Output .......................................................... 150 mV/100 Ω
• Input Sensitivity/Input Impedance
PHONO .................................................................. 3.5 mV/47 kΩ
CD, etc. ................................................................. 200 mV/47 kΩ
MULTI CH INPUT ............................................... 200 mV/47 kΩ
• Tuning Range ........................................................ 530 to 1710 kHz
GENERAL
• Power Supply ......................................................... AC 120 V/60 Hz
• Power Consumption .................................................. 500 W/630 VA
• Standby Power Consumption ...................................... 0.5 W or less
• AC Outlets.................................... 2 (Total 100 W/0.8 A maximum)
• Dimensions (W x H x D) ................................. 435 x 171 x 424 mm
(17-1/8” x 6-3/4” x 16-11/16”)
• Weight .................................................................. 15.0 kg (33.1 lbs)
• Output Level/Output Impedance
REC OUT ............................................................. 200 mV/1.2 kΩ
PRE OUT ................................................................... 1.0 V/500 Ω
SUBWOOFER ........................................................... 2.0 V/500 Ω
ZONE 2 OUTPUT..................................................... 1.0 V/1.2 kΩ
ZONE 3 OUTPUT..................................................... 1.0 V/1.2 kΩ
ADDITIONAL
INFORMATION
95
01EN00_HTR5890U.book Page i Thursday, December 23, 2004 12:39 PM
LIST OF REMOTE CONTROL CODES
AMPLIFIER
AMSTRAD
0105
ARCAM
0296
AUDIOLAB
0296
CARVER
0296
GE
0105
GENEXXA
0422
GRUNDIG
0296
HARMAN/KARDON
0919
JVC
0358
LEFT COAST 0919
LINN
0296
MAGNAVOX 0296
MARANTZ
0296, 0919
MICROMEGA 0296
MYRYAD
0296
OPTIMUS
0422
PANASONIC 0335
PHILIPS
0296, 0919
PIONEER
0040
POLK AUDIO 0296, 0919
REALISTIC
0422
REVOX
0296
SONY
0247
SOUNDESIGN 0105
TECHNICS
0335
THORENS
0296
VICTOR
0358
WARDS
0040, 0105
YAMAHA
0381
CABLE
ABC
0030, 0035
AMERICAST 0926
BELL SOUTH 0926
BIRMINGHAM CABLE
COMMUNICATIONS
0303
BRITISH TELECOM 0030
CABLE & WIRELESS
1095
DAERYUNG 0035, 0504, 0904,
1904
DIRECTOR
0503
FILMNET
0470
GENERAL INSTRUMENT
0030, 0303, 0503,
0837,
GOLDSTAR 0171
HAMLIN
0036, 0300
JERROLD
0030, 0303, 0503,
0837
LG
0171
MNET
0470
MEMOREX
0027
MOTOROLA 0303, 0503, 0837,
1133
NTL
1095
NOOS
0844
ONO
1095
PVP STEREO VISUAL MATRIX
0030
PACE
0264, 1087, 1095
PANASONIC 0027, 0035, 0134
PARAGON
0027
PHILIPS
0332, 0344
PIONEER
0171, 0560, 0904,
1904
i
PULSAR
0027
QUASAR
0027
REGAL
0300, 0306
RUNCO
0027
SAGEM
0844
SAMSUNG
0027, 0171
SCIENTIFIC ATLANTA
0035, 0504, 0904,
1904
SONY
1033
STARCOM
0030
SUPERCABLE
0303
TS
0030
TELE+1
0470
TELEWEST
1095
TORX
0030
TOSHIBA
0027
TRANS PX
0303
UNITED CABLE
0030
ZENITH
0027, 0552, 0926
CD PLAYER
AIWA
0184
ARCAM
0184
AUDIO RESEARCH 0184
AUDIO TON 0184
AUDIOLAB
0184
AUDIOMECA 0184
CAIRN
0184
CALIFORNIA AUDIO LABS
0056
CARVER
0184, 0206
CYRUS
0184
DKK
0027
DMX ELECTRONICS
0184
DENON
0900
DYNAMIC BASS
0206
EMERSON
0332
FISHER
0206
GENEXXA
0059, 0332
GOODMANS 0332
GRUNDIG
0184
HARMAN/KARDON
0184, 0200
HITACHI
0059
JVC
0099
KENWOOD
0055, 0064
KRELL
0184
LXI
0332
LINN
0184
MCS
0056
MAGNAVOX 0184, 0332
MARANTZ
0056, 0184
MATSUI
0184
MEMOREX
0332
MERIDIAN
0184
MICROMEGA 0184
MIRO
0027
MISSION
0184
MYRYAD
0184
NAD
0027
NSM
0184
NAIM
0184
OPTIMUS
0027, 0059, 0064,
0206, 0332
PANASONIC 0056
PHILIPS
0184
PIONEER
0059, 0332
POLK AUDIO 0184
PROTON
0184
QED
0184
QUAD
0184
QUASAR
0056
RCA
0059, 0206, 0332
REALISTIC
0206
REVOX
0184
ROTEL
0184
SAE
0184
SANSUI
0184, 0332
SANYO
0206
SCOTT
0332
SEARS
0332
SHARP
0064
SIMAUDIO
0184
SONIC FRONTIERS 0184
SONY
0027
SYMPHONIC 0332
TAG MCLAREN
0184
TANDY
0059
TECHNICS
0056
THORENS
0184
THULE
0184
UNIVERSUM 0184
VICTOR
0099
WARDS
0184
YAMAHA
2300, 2301
CD RECORDER
KENWOOD
MARANTZ
PHILIPS
YAMAHA
0653
0653
0653
2400
DVD PLAYER
ACOUSTIC SOLUTIONS
0757
ALBA
0744
AMSTRAD
0740
APEX DIGITAL
0699, 0744,
0782, 0821, 0823,
0857, 1127
BLAUPINKT 0744
BLUE PARADE
0598
BUSH
0740
CENTREX
0699
CLATRONIC 0815
CYBERHOME 0741
DVD2000
0548
DAEWOO
0811, 0797
DANSAI
0797
DECCA
0797
DENON
0517
DIAMOND
0795
DIGITREX
0699
EMERSON
0618
ENTERPRISE 0618
FISHER
0697
GE
0549, 0744
GO VIDEO
0742
GOLDSTAR 0768
GRADIENTE 0678
GREENHILL 0744
GRUNDIG
0566
HITACHI
0600, 0691
HITEKER
0699
JVC
0585, 0650
KLH
0744
KENWOOD
0517, 0561
KOSS
LG
LIMIT
MAGNAVOX
MARANTZ
MEMOREX
MICO
MICROSOFT
MINTEK
MITSUBISHI
MUSTEK
NESA
ONKYO
ORITRON
PALSONIC
PANASONIC
PHILIPS
0678
0768
0795
0530, 0702
0566
0858
0750
0549
0744
0548
0757
0744
0530
0678
0699
0517, 0659, 1389
0530, 0566, 0673,
0881
PIONEER
0552, 0598, 0658,
0659
POLK AUDIO 0566
PROSCAN
0549
QWESTAR
0678
RCA
0549, 0598, 0744
ROTEL
0650
SM ELECTRONIC 0757
SAMSUNG
0600
SANYO
0697
SHARP
0657
SHERWOOD 0797
SHINSONIC 0560
SLIM ART
0811
SONY
0560, 0891
SYLVANIA
0702
TATUNG
0797
TEAC
0598, 0744
TECHNICS
0517
THETA DIGITAL
0598
THOMSON
0549
TOSHIBA
0530
URBAN CONCEPTS 0530
XBOX
0549
YAMAHA
0517, 0566, 0572,
2100, 2101, 2102
ZENITH
0530, 0618, 0768
ZEUS
0811
DVD RECORDER
PANASONIC
PHILIPS
PIONEER
TOSHIBA
YAMAHA
2800, 2801, 2802
2808
2804, 2805, 2806
2803
2807
LD PLAYER
CARVER
DENON
MARANTZ
MITSUBISHI
NAD
NAGSMI
OPTIMUS
PHILIPS
PIONEER
SALORA
SONY
TELEFUNKEN
YAMAHA
0091
0086
0091
0086
0086
0086
0086
0091
0086
0091
0228
0086
2200
01EN00_HTR5890U.book Page ii Thursday, December 23, 2004 12:39 PM
MD RECORDER
KENWOOD
ONKYO
SHARP
SONY
YAMAHA
0708
0895
0888
0517
2500, 2501, 2502
RECEIVER (TUNER)
ADC
AIWA
0558
0185, 1116, 1415,
1432, 1668
ALCO
1417
ANAM
1636
APEX DIGITAL
1284
AUDIOLAB
1216
AUDIOTRONIC
1216
AUDIOVOX 1417
BOSE
1256
CAMBRIDGE SOUNDWORKS
1397
CAPETRONIC 0558
CARVER
1116, 1216
CENTREX
1284
DENON
1387
FERGUSON 0558
FINE ARTS
1216
GRUNDIG
1216
HARMAN/KARDON
0137, 1331
INTEGRA
0162, 1325
JBL
0137, 1333
JVC
0101, 0558, 1401,
1522
KLH
1417, 1439
KENWOOD
1054, 1340
MCS
0066
MAGNAVOX 0558, 1116, 1216,
1296,
MARANTZ
0066, 1116, 1216,
1316
MICROMEGA 1216
MUSICMAGIC
1116
MYRYAD
1216
NAD
0347
NORCENT
1416
ONKYO
0162, 0869, 1325
OPTIMUS
0558, 1050
PANASONIC 0066, 1315, 1545,
1790
PHILIPS
1116, 1216, 1293,
1295, 1296, 1310,
1316
PIONEER
0041, 0558, 1050,
1411
POLK AUDIO 1316
PROSCAN
1281
QUASAR
0066
RCA
0558, 1050, 1281,
1417, 1636,
SABA
0558
SANSUI
1116
SCHNEIDER 0558
SONY
0185, 1085, 1185,
1685, 1785
STEREOPHONICS 1050
SUNFIRE
1340
TEAC
1417
TECHNICS
0066, 1335, 1336,
1545
TELEFUNKEN
0558
THOMSON
1281
THORENS
1216
UHER
0558
VENTURER
VICTOR
WARDS
YAMAHA
1417
0101
0041, 0185
0203, 1203, 1358,
2600, 2601
SATELLITE TUNER
@SAT
1327
ABSAT
0150
ALBA
0482
ALPHASTAR 0799
AMSTRAD
0874
ASTON
0169, 1156
ASTRO
0200
ATSAT
1327
AVALON
0423
BLAUPUNKT 0200
BRITISH SKY BROADCASTING
0874, 1202
CANAL DIGITAL
0880
CANAL SATELLITE 0880
CANAL+
0880
CHAPARRAL 0243
CITYCOM
1203
CONNEXIONS
0423
CROSSDIGITAL
1136
CYRUS
0227
D-BOX
0750, 1154
DMT
1102
DNT
0227, 0423
DAERYUNG 0423
DAEWOO
1323
DIGENIUS
0326
DIRECTV
0274, 0419, 0593,
0666, 0751, 0776,
0846, 1103, 1136,
1169, 1776, 1883
DISH NETWORK SYSTEM
0802, 1032
DISHPRO
0802, 1032
DISTRATEL 0111
DREAM MULTIMEDIA
1264
ECHOSTAR 0194, 0423, 0637,
0802, 0880, 0898,
1032, 1113
ENGEL
1044
EXPRESSVU 0802
FTE
0890
FINLUX
0482
FRACARRO 0898
FUBA
0423
GE
0593
GOI
0802
GALAXIS
0890, 1138
GENERAL INSTRUMENT
0896
GOLD BOX
0880
GRUNDIG
0200, 0874
HTS
0802
HIRSCHMANN
0200, 0423
HITACHI
0482, 0846
HUGHES NETWORK SYSTEM
0776, 1169, 1776
HUMAX
0890, 1203
INVIDEO
0898
JVC
0802
KATHREIN
0150, 0200, 0227,
0276, 0685, 1248
KREISELMEYER
0200
LABGEAR
1323
LOGIX
1044
LORENZEN 0326
MAGNAVOX 0749, 0751
MANHATTAN
0482, 1044,
1110
MARANTZ
0227
MEDIASAT
0880
MEMOREX
0751
METRONIC
0111
MITSUBISHI 0776
MOTOROLA 0896
MYRYAD
0227
NEXT LEVEL 0896
NOKIA
0482, 0750, 0778,
1154, 1250, 1750
OCTALTV
1032
ORBITECH
1127
PACE
0482, 0874, 1202,
1350
PANASONIC 0274, 0728, 0874,
1347
PANDA
0482
PAYSAT
0751
PHILIPS
0160, 0227, 0482,
0749, 0751, 0776,
0880, 1103, 1169,
1776
PIONEER
0880
PROMAX
0482
PROSCAN
0419, 0593
RCA
0170, 0419, 0593,
0882
RFT
0227
RADIOSHACK
0896
RADIOLA
0227
RADIX
0423
SKY
0874, 0883, 1202
SM ELECTRONIC 1227
SABRE
0482
SAGEM
0847, 1141, 1280
SAMSUNG
1044, 1136, 1303,
1319
SAT CONTROL
1327
SATSTATION 1110
SCHWAIGER 1138
SEEMANN
0423
SIEMENS
0200
SONY
0666, 0874, 1666
STAR CHOICE
0896
STRONG
1327
TPS
0847, 1280
TANTEC
0482
TECHNISAT 1126, 1127
TELESTAR
1127
THOMSON
0482, 0880, 1073,
1318
TOPFIELD
1233
TOSHIBA
0776, 0817, 1776
ULTIMATETV
0419, 0666
UNIDEN
0749, 0751
UNIVERSUM 0200
VENTANA
0227
WISI
0200, 0423, 0482
XSAT
0150
ZEHNDER
1102
ZENITH
0883, 1883
TAPE DECK
AIWA
0056
CARVER
0056
GRUNDIG
0056
HARMAN/KARDON
0056
MAGNAVOX 0056
MARANTZ
0056
MYRYAD
0056
OPTIMUS
0054
PHILIPS
PIONEER
POLK AUDIO
RCA
REVOX
SANSUI
SONY
THORENS
WARDS
YAMAHA
0056
0054
0056
0054
0056
0056
0270
0056
0054
2700,2701
TV
AGB
AOC
0543
0036, 0057, 0087,
0119, 0120, 0135,
0205, 0207, 0478
ASA
0131
AWA
0036
ACURA
0036
ADDISON
0119, 0135, 0680
ADMIRAL
0120, 0190, 0490
ADVENT
0788
AIKO
0119
AKAI
0036, 0057, 0235,
0388, 0543, 0729,
0839
AKURA
0291
ALBA
0036, 0064, 0398,
0695
AMERICA ACTION 0207
AMPRO
0778
AMSTRAD
0036, 0064, 0198,
0398, 0439, 0460,
0543
ANAM
0036, 0207, 0277
ANAM NATIONAL 0277, 0677
ANITECH
0036
APEX DIGITAL
0775, 0792,
0794
AUDIOSONIC 0064, 0136
BANG & OLUFSEN 0592
BASIC
0036
BAUR
0064, 0388, 0539
BAYSONIC
0207
BEAUMARK 0205
BEKO
0397, 0513, 0741,
0742
BELL & HOWELL 0181
BEON
0064
BLAUPUNKT 0222
BLUE SKY
0695, 1064
BONDSTEC 0274
BRADFORD 0207
BRANDT
0136, 0362
BROKSONIC 0263, 0490
BUSH
0036, 0064, 0398,
0401, 0695, 1064
CCE
0064
CGE
0274
CTC
0274
CXC
0207
CANDLE
0057
CARNIVALE 0057
CARVER
0081, 0197
CASCADE
0036
CATHAY
0064
CELEBRITY 0027
CELERA
0792
CENTURION 0064
CHANGHONG
0792
CHING TAI
0036, 0119
CHUN YUN
0027, 0036, 0119,
0207
CHUNG HSIN 0080, 0135, 0207
ii
01EN00_HTR5890U.book Page iii Thursday, December 23, 2004 12:39 PM
CIMLINE
CINERAL
CITIZEN
CLARION
CLARIVOX
CLATRONIC
CONDOR
CONRAC
CONTEC
CRAIG
CROSLEY
CROWN
0036
0119, 0478
0057, 0087, 0119
0207
0064
0274, 0397
0347, 0397
0835
0036, 0207
0207
0081
0036, 0064, 0207,
0397, 0445
CURTIS MATHES 0057, 0074,
0081, 0087, 0120,
0172, 0181, 0193,
0478, 0729, 1174,
1374
DAEWOO
0036, 0057, 0064,
0119, 0135, 0181,
0197, 0205, 0207,
0401, 0478, 0650,
0661, 1688
DANSAI
0064
DAYTON
0036
DE GRAAF
0235, 0575
DECCA
0064, 0543
DENON
0172
DIGATRON
0064
DIXI
0036, 0064
DUMONT
0044
DWIN
0747, 0801
ECE
0064
ELBE
0286
ELECTROBAND
0027
ELIN
0064, 0575
ELITE
0347
ELTA
0036
EMERSON
0181, 0205, 0207,
0263, 0388, 0490,
0650
ENVISION
0057,0840
EPSON
0860
ERRES
0064
ETHER
0036, 0057
ETRON
0036
EUROPHON 0543
FERGUSON 0064, 0100, 0136,
0265, 0314, 0362,
0587
FIDELITY
0388
FINLANDIA 0235, 0373
FINLUX
0064, 0131, 0132,
0373, 0543
FIRSTAR
0036, 0263
FIRSTLINE
0036, 0274, 0695
FISHER
0131, 0181, 0235,
0397
FLINT
0482
FORMENTI
0064, 0347
FORTRESS
0120
FRONTECH 0190, 0274, 0291
FUJITSU
0710, 0836
FUNAI
0207, 0198, 0291
FUTURETECH
0207
GE
0057, 0074, 0078,
0119, 0205, 0207,
0478, 0587, 1174,
1374, 1481
GEC
0064, 0543
GATEWAY
1782, 1783
GELOSO
0036
GENEXXA
0190
GIBRALTER 0044, 0057
iii
GOLDSTAR
0057, 0064, 0136,
0181, 0205, 0404
GOODMANS 0064, 0398, 0401,
0661
GOREMJE
0397
GRADIENTE 0080, 0197
GRAETZ
0190, 0388
GRANADA
0064, 0235, 0366,
0543
GRANDIN
0637
GRUNDIG
0064, 0222, 0514,
0583, 0614
GRUNPY
0207
HCM
0036, 0439
HALLMARK 0205
HANKOOK
0057, 0205, 0207
HANSEATIC 0064, 0347, 0388,
0455, 0583
HANTAREX 0543
HARMAN/KARDON 0081
HARVARD
0207
HAVERMY
0120
HELLO KITTY
0478
HINARI
0036, 0064
HISAWA
0482
HITACHI
0036, 0057, 0119,
0132, 0136, 0172,
0190, 0205, 0252,
0383, 0508, 0575,
0605, 1172, 1283
HUA TUN
0036
HUANYU
0401
HYPSON
0064, 0291
ICE
0291, 0398
ITS
0398
ITT
0190, 0388, 0575
IMPERIAL
0274, 0397, 0445
INDIANA
0064
INFINITY
0081
INGELEN
0190
INNO HIT
0543
INNOVA
0064
INTEQ
0044
INTERFUNK 0064, 0190, 0274,
0388, 0539
INTERVISION
0064, 0291,
0404
JBL
0081
JCB
0027
JVC
0080, 0398, 0490,
0680, 0710
JEAN
0036, 0078, 0119,
0183, 0263
JENSEN
0788
KEC
0207
KTV
0057, 0207
KAISUI
0036
KAPSCH
0190
KARCHER
0637
KATHREIN
0583
KENDO
0064
KENWOOD
0057
KNEISSEL
0286, 0462
KOLIN
0080, 0135, 0207
KORPEL
0064
KOYODA
0036
L&S ELECTRONIC 0835
LG
0057, 0064, 0087,
0135, 0205, 0741
LXI
0074, 0081, 0181,
0183, 0205
LEYCO
0064, 0291
LIESENK & TTER 0064
LOEWE
0539
LUXOR
0383, 0388
M ELECTRONIC
0036, 0064,
0131, 0132, 0136,
0190, 0314, 0373,
0401, 0507
MGA
0057, 0177, 0205
MTC
0057, 0087, 0539
MAGNADYNE
0274, 0543
MAGNAFON 0543
MAGNAVOX 0057, 0081, 1281,
1481
MANESTH
0291, 0347
MARANTZ
0057, 0064, 0081,
0583
MARK
0064
MATSUI
0036, 0064, 0235,
0398, 0514, 0543
MATSUSHITA
0277, 0677
MEDIATOR 0064
MEDION
0695, 0835, 1064
MEGATRON 0172, 0205
MEMOREX
0036, 0177, 0181,
0205, 0277, 0490,
1064
METZ
0474
MICROMAXX
0835
MICROSTAR 0835
MIDLAND
0044, 0074, 0078
MINERVA
0514
MINOKA
0439
MITSUBISHI 0057, 0120, 0135,
0177, 0181, 0205,
0207, 0263, 0277,
0539, 0863, 1277
MIVAR
0318,0319, 0543,
0636
MOTOROLA 0120
MULTITECH 0036, 0207
MYRYAD
0583
NAD
0183, 0205, 0388,
0893
NEC
0036, 0057, 0078,
0181, 0183, 0197,
0205, 0482, 0524,
1731
NEI
0064
NTC
0119
NECKERMANN
0064, 0583
NETSAT
0064
NEWAVE
0036, 0119, 0120,
0205
NIKKAI
0064, 0291
NIKKO
0057, 0119, 0205
NOKIA
0388, 0500, 0507,
0575, 0658
NORCENT
0775, 0851
NORDMENDE
0136, 0314,
0587
OCEANIC
0190, 0388
ONWA
0207, 0460
OPTIMUS
0181, 0193, 0277,
0677
OPTONICA
0120
ORION
0064, 0263, 0347,
0490, 0543
OSAKI
0291, 0439
OTTO VERSAND
0064, 0347,
0539, 0583
PALLADIUM 0397, 0445
PANAMA
0291
PANASONIC 0064, 0078, 0081,
0190, 0277, 0677,
1437
PATHE CINEMA
0265, 0347
PAUSA
0036
PENNEY
0057, 0074, 0078,
0087, 0183, 0205,
1374
PERDIO
0347
PHILCO
0057, 0064, 0081,
0172, 0205, 0207,
0274, 0490, 1688
PHILIPS
0027, 0057, 0064,
0078, 0081, 0119,
0135, 0205, 0401,
0583, 0717, 1481
PHONOLA
0064
PILOT
0057
PIONEER
0136, 0190, 0193,
0314, 0706, 0787,
0893
PORTLAND 0119
PRANDONI-PRINCE
0543
PRIMA
0788
PRISM
0078
PROFEX
0036, 0388
PROSCAN
0074
PROTECH
0036, 0064, 0274,
0291, 0445, 0695
PROTON
0036, 0057, 0205
PULSAR
0044
QUASAR
0078, 0277, 0677
QUELLE
0064, 0131, 0388,
0539
R-LINE
0064
RCA
0027, 0057, 0074,
0117, 0119, 0205,
0706, 1074, 1174,
1274, 1374, 1474,
1481, 1574
RFT
0455
RADIOSHACK
0057, 0074,
0181, 0205, 0207
RADIOLA
0064
RADIOMARELLI
0543
REALISTIC
0057, 0181, 0205,
0207
REDIFFUSION
0388
REOC
0741
REVOX
0064
REX
0190, 0286, 0291
ROADSTAR 0036, 0291, 0445
RUNCO
0044, 0057, 0524,
0630
SBR
0064
SEG
0291, 0695
SEI
0543
SKY
0064
SSS
0207
SABA
0136, 0190, 0314,
0362
SACCS
0265
SAGEM
0637
SAISHO
0036, 0291, 0543
SALORA
0190, 0380, 0388,
0575
SAMBERS
0543
SAMPO
0036, 0057, 0119,
0120, 0181, 0198,
0205, 0677, 1782
SAMSUNG
0036, 0057, 0064,
0087, 0117, 0119,
0181, 0205, 0291,
0397, 0583, 0614,
0645, 0729, 0793,
0839, 0841
SANSEI
0478
SANSUI
0490
01EN00_HTR5890U.book Page iv Thursday, December 23, 2004 12:39 PM
SANYO
0131, 0181, 0207,
0235, 0366, 0826
SCHAUB LORENZ 0388
SCHNEIDER 0064, 0274, 0398,
0695
SCOTCH
0205
SCOTT
0205, 0207, 0263
SEARS
0074, 0081, 0181,
0183, 0198, 0205
SELECO
0190, 0286
SEMIVOX
0207
SEMP
0183
SHARP
0057, 0120, 0677
SHEN YING 0036, 0119
SHENG CHIA 0036, 0120, 0263
SIAREM
0543
SIEMENS
0064, 0222
SINUDYNE
0543
SKANTIC
0383
SKYGIANT
0207
SKYWORTH 0064
SOLAVOX
0190
SONITRON
0235
SONOKO
0036, 0064
SONOLOR
0190, 0235
SONTEC
0064
SONY
0027, 0677, 0861,
1127, 1532, 1678
SOUNDESIGN
0205, 0207
SOUNDWAVE
0064, 0445
SOWA
0078, 0087, 0119,
0183, 0205
SQUAREVIEW
0198
STANDARD 0036
STARLITE
0207
STERN
0190, 0286
SUPREME
0027
SYLVANIA
0057, 0081, 0198
SYMPHONIC 0198, 0207
SYNCO
0027, 0087, 0119,
0120, 0205, 0478
SYSLINE
0064
T+A
0474
TCM
0835
TMK
0205
TNCI
0044
TVS
0490
TACICO
0036, 0119, 0205
TAI YI
0036
TANDY
0120, 0190
TASHIKO
0119, 0677
TATUNG
0036, 0064, 0078,
0081, 0087, 0181,
0183, 0543
TEAC
0036, 0064, 0291,
0439, 0445, 0482,
0695, 1064
TEC
0274
TECHNEMA 0347
TECHNICS
0078, 0277, 0677
TECHWOOD 0078
TECO
0036, 0078, 0119,
0120, 0205, 0291,
0680
TEKNIKA
0081, 0087, 0119,
0177, 0207
TELEFUNKEN
0136, 0289,
0362, 0652, 0729
TELEMEISTER
0347
TELETECH
0036
TENSAI
0347
TERA
0057
THOMSON
0136, 0314, 0587,
0652, 1474
THORN
0064, 0131, 0388,
0539
TOSHIBA
0087, 0181, 0183,
0535, 0645, 0677,
0859, 1283, 1383,
1683, 1731
TRIUMPH
0543
TUNTEX
0036, 0057, 0119
UHER
0347
UNIVERSUM 0064, 0131, 0132,
0291, 0373, 0397,
0519
VECTOR RESEARCH
0057
VESTEL
0064
VICTOR
0080, 0277, 0677,
0680
VIDEOSAT
0274
VIDIKRON
0081
VIDTECH
0205
VIEWSONIC 1782
VISION
0347
VOXSON
0190
WALTHAM
0383
WARDS
0057, 0081, 0205,
0893
WATSON
0064, 0347
WAYCON
0183
WHITE WESTINGHOUSE
0064, 0347, 0490,
0650
YAMAHA
0057, 0796, 0860,
2900, 2901, 2902
YAPSHE
0277
YOKO
0064, 0291
ZENITH
0044, 0119, 0205,
0490
VCR
ASA
ADMIRAL
ADVENTURA
AIKO
AIWA
0064, 0108
0075
0027
0305
0027, 0064, 0334,
0375, 0379
AKAI
0068, 0342
AKIBA
0099
ALBA
0099, 0305, 0342,
0379
AMERICA ACTION 0305
AMERICAN HIGH 0062
AMSTRAD
0027
ANAM
0064, 0253, 0267,
0305, 0507
ANAM NATIONAL 0253, 1589
ANITECH
0099
ASHA
0267
ASUKA
0064
AUDIOVOX 0064, 0305
BAIRD
0027, 0068, 0131
BASIC LINE 0099, 0305
BEAUMARK 0267
BELL & HOWELL 0131
BLAUPUNKT 0253
BRANDT
0347
BRANDT ELECTRONIC
0068
BROKSONIC 0211, 0375, 1506
BUSH
0099, 0305, 0379
CCE
0099, 0305
CGE
0027
CALIX
0064
CANON
0062
CARVER
0108
CIMLINE
CINERAL
CITIZEN
COLT
COMBITECH
CRAIG
0099
0305
0064, 0305, 1305
0099
0379
0064, 0074, 0099,
0267
CROWN
0099, 0305
CURTIS MATHES 0062, 0068,
0087, 1062
CYBERNEX 0267
CYRUS
0108
DAEWOO
0072, 0131, 0305,
0669, 1305
DANSAI
0099
DE GRAAF
0069
DECCA
0027, 0108
DENON
0069
DUAL
0068
DUMONT
0027, 0108, 0131
DYNATECH 0027
ESC
0267, 0305
ELCATECH
0099
ELECTROHOME
0064
ELECTROPHONIC 0064
EMEREX
0059
EMERSON
0027, 0062, 0064,
0070, 0072, 0211,
0267, 0305, 1305,
1506
FERGUSON 0068, 0347
FIDELITY
0027
FINLANDIA 0108, 0131
FINLUX
0027, 0069, 0108,
0131
FIRSTLINE
0064, 0070, 0072,
0099
FISHER
0074, 0131
FUJI
0060, 0062
FUJITSU
0027, 0072
FUNAI
0027
GE
0062, 0087, 0267,
0834, 1062, 1087
GEC
0108
GARRARD
0027
GENERAL
0072
GO VIDEO
0459
GOLDHAND 0099
GOLDSTAR 0064, 0252, 0507,
1264
GOODMANS 0027, 0064, 0099,
0305
GRADIENTE 0027
GRAETZ
0068, 0131, 0267
GRANADA
0108, 0131
GRANDIN
0027, 0064, 0099
GRUNDIG
0099, 0108, 0253,
0374
HCM
0099
HI-Q
0074
HANSEATIC 0064
HARLEY DAVIDSON
0027
HARMAN/KARDON 0108
HARWOOD
0099
HINARI
0099, 0267, 0379
HITACHI
0027, 0064, 0068,
0069, 0267
HUGHES NETWORK SYSTEMS
0069
HYPSON
0099
ITT
0068, 0131, 0267
ITV
0064, 0305
IMPERIAL
0027
INTERFUNK 0108
JVC
JENSEN
KEC
KLH
KAISUI
KENWOOD
KODAK
KOLIN
KORPEL
LG
0068, 0072, 0094
0068
0064, 0305
0099
0099
0068, 0094
0062, 0064
0068, 0070
0099
0064, 0069, 0072,
0507
LXI
0064
LENCO
0305
LEYCO
0099
LLOYD’S
0027
LOEWE
0064, 0108, 1589
LOGIK
0099, 0267
LUXOR
0070, 0075, 0131
M ELECTRONIC
0027
MEI
0062
MGA
0070, 0267
MGN TECHNOLOGY
0267
MTC
0027, 0267
MAGNASONIC
1305
MAGNAVOX 0027, 0062, 0066,
0108, 1808
MAGNIN
0267
MANESTH
0072, 0099
MARANTZ
0062, 0108
MARTA
0064
MATSUI
0375, 0379
MATSUSHITA
0062
MEDION
0375
MEMOREX
0027, 0062, 0064,
0066, 0074, 0075,
0131, 0267, 0334,
0375, 1264
MEMPHIS
0099
METZ
0064, 0374, 1589
MINOLTA
0069
MITSUBISHI 0068, 0070, 0094,
0108, 0834
MOTOROLA 0062, 0075
MULTITECH 0027, 0099
MURPHY
0027
MYRYAD
0108
NAD
0131
NEC
0062, 0064, 0068,
0075, 0094, 0131
NATIONAL
0253
NECKERMANN
0108
NESCO
0099
NEWAVE
0064
NIKKO
0064
NOBLEX
0267
NOKIA
0068, 0131, 0267
NORDMENDE
0068, 0347
OCEANIC
0027, 0068
OKANO
0342, 0375
OLYMPUS
0062, 0253
OPTIMUS
0064, 0075, 0131,
0459
ORION
0211, 0375, 0379,
1506
OSAKI
0027, 0064, 0099
OTTO VERSAND
0108
PALLADIUM 0064, 0068, 0099
PANASONIC 0062, 0252, 0253,
0643, 1062, 1589
PATHE MARCONI 0068
PENNEY
0062, 0064, 0069,
0267, 1062, 1264
PENTAX
0069
PERDIO
0027
iv
5890U_Hyo1-4.fm Page 1 Thursday, December 23, 2004 12:51 PM
U
PHILCO
PHILIPS
0062
0062, 0108, 0645,
1108, 1208
PHONOLA
0108
PILOT
0064
PIONEER
0069, 0094, 0108
POLK AUDIO 0108
PROFITRONIC
0267
PROLINE
0027
PROSCAN
0087, 1087
PROTEC
0099
PULSAR
0066
PYE
0108
QUASAR
0062, 1062
QUELLE
0108
RCA
0062, 0069, 0087,
0267, 0834, 1062,
1087
RADIOSHACK
0027
RADIOLA
0108
RADIX
0064
RANDEX
0064
REALISTIC
0027, 0062, 0064,
0074, 0075, 0131
REOC
0375
REPLAYTV
0641, 0643
REX
0068
ROADSTAR 0064, 0099, 0267,
0305
RUNCO
0066
SBR
0108
SEG
0267
SEI
0108
STS
0069
SABA
0068, 0347
SALORA
0070
SAMPO
0064, 0075
SAMSUNG
0072, 0267, 0459
SANKY
0066, 0075
SANSUI
0027, 0068, 0094,
1506
SANYO
0074, 0131, 0267
SAVILLE
0379
SCHAUB LORENZ 0027, 0068,
0131
SCHNEIDER 0027, 0099, 0108
SCOTT
0070, 0072, 0211
SEARS
0027, 0062, 0064,
0069, 0074, 0131,
1264
SELECO
0068
SEMP
0072
SHARP
0075, 0834
SHINTOM
0099, 0131
SIEMENS
0064, 0108, 0131
SILVA
0064
SINGER
0072, 0099
SINUDYNE
0108
SONIC BLUE 0641, 0643
SONTEC
0064
SONY
0027, 0059, 0060,
0062, 0663, 1259
SUNKAI
0375
SUNSTAR
0027
SUNTRONIC 0027
SYLVANIA
0027, 0062, 0108,
0070, 1808
SYMPHONIC 0027
TMK
0267
TANDY
0027, 0131
TASHIKO
0027, 0064
TATUNG
0027, 0068, 0072,
0094, 0108
TEAC
0027, 0068, 0305,
0334, 0669
TECHNICS
0062, 0253
TECO
0062, 0064, 0068,
0075
TEKNIKA
0027, 0062, 0064
TELEAVIA
0068
TELEFUNKEN
0068, 0347
TENOSAL
0099
TENSAI
0027
THOMAS
0027
THOMSON
0068, 0087, 0094,
0347
THORN
0068, 0131
TIVO
0645, 0663
TOSHIBA
0068, 0070, 0072,
0094, 0108, 0872
TOTEVISION 0064, 0267
UHER
0267
UNITECH
0267
UNIVERSUM 0027, 0064, 0108,
0267
VECTOR
0072
VICTOR
0068, 0094
VIDEO CONCEPTS 0072
VIDEOMAGIC
0064
VIDEOSONIC 0267
VILLAIN
0027
WARDS
0027, 0062, 0069,
0074, 0075, 0087,
0099, 0108, 0267
WHITE WESTINGHOUSE
0099
XR-1000
0027, 0062, 0099
YAMAHA
0068
YAMISHI
0099
YOKAN
0099
YOKO
0267
ZENITH
0027, 0060, 0066,
1506
HTR-5890
AV Receiver
© 2005
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
All rights reserved.
OWNER'S MANUAL
Printed in Malaysia
WE64820
Download PDF