QV ELF
SERIES 363 — CNC Vision Measuring System
Programmable Power Turret (PPT)
The three tube lens selection provides three magnification
levels while the same objective lens. Replacement objective
lenses allow a wide range of magnifications to support a
variety of measurements.
1X tube lens x 2.5X objective
View field: 2.5 x 1.88 mm
FEATURES
•With a controller-integrated compact size
design, this light weight, space saving
series is appropriate for installation
anywhere where space is limited.
•With a small boy and full funcitionality,
this series offers various types of machines
equipped with the PRL iluminator and
power turret.
•The highest performance/cost ratio of the
series.
2X tube lens x 2.5X objective
View field: 1.25 x 0.94 mm
QV ELF202PRO
6X tube lens x 2.5X objective
View field: 0.41 x 0.31 mm
Programmable Ring Light (PRL)
Fine control of obliquity and direction provides illumination
optimal for measurement. Obliquity can be arbitrarily set in the
range from 30° to 80°. This type of illumination is effective for
enhancing the edge of inclined surfaces or very small steps.
Illumination can be controlled independently in every
direction, back and forth, right and left. Measurement with
edge enhancement is possible by forming a shadow by
lighting from only one direction.
Parabolic
mirror
Four-quadrant
LED light
Toroidal mirror
Workpiece
surface
30°
60°
80°
Laser Auto Focus (LAF) Function*
Mitutoyo offers models
featuring the LAF system which
enables high-speed focusing.
Refer to page N-7 for more
details. *Available on the PRO model.
SPECIFICATIONS
Model No. and Type
Range
X-axis
Y-axis
Z-axis
Resolution
High-sensitivity CCD camera
Accuracy*
E1XY
E1Z
Max. drive speed (X/Y/Z-axis)
Illumination
Surface
(PRL: Programmable Ring
Contour
Light)
Ring light
Magnification change system
Stage glass size
Max. stage loading
Mass
QV ELF202PT
QV ELF202PRO
200mm
250mm
100mm
0.1µm
B&W
(2.0+3L/1000)µm
(4.0+5L/1000)µm
100mm/s
Halogen
Halogen
Halogen
Halogen
Halogen
PRL (LED, white)
Programmable power turret
269 x 311mm
10kg
195kg
N
* The measuring accuracy is defined at the following conditions
Programmable power turret: 1X Objective set: 2.5X
L = Dimension between two arbitrary points (mm)
Refer to the QUICK VISION leaflet (E4125) for
more details.
N-1
QV Apex / Hyper QV
SERIES 363 — CNC Vision Measuring System
QV Apex302PRO
Hyper QV404PRO
QV Apex606PRO
SPECIFICATIONS
Model No.
Range
N
X-axis
Y-axis
Z-axis
Resolution
High-sensitivity CCD camera
Accuracy*
E1XY
E1Z
E2XY
Illumination
Surface
(PRL: Programmable Ring Light)
Contour
PRL
Magnification change system
Max. drive speed
X/Y-axis
Z-axis
Stage glass size
Max workpiece height
Max. stage loading
Dimensions (W x D x H)**
Mass**
QV Apex606PRO
QV Apex404PRO
QV Apex302PRO
QV Apex606PRO2
QV Apex404PRO2
QV Apex302PRO2
QV Apex606PRO3
QV Apex404PRO3
QV Apex302PRO3
Hyper QV606PRO
Hyper QV404PRO
Hyper QV302PRO
300mm
400mm
600mm
200mm
400mm
650mm
200mm
250mm
250mm
0.1µm [0.02µm]
B&W (PRO3 model: color)
(1.5+3L/1000)µm [(0.8+2L/1000)µm]
(1.5+4L/1000)µm [(1.5+2L/1000)µm] [PRO2 model: (4.0+5L/1000)µm]
(2+4L/1000)µm [(1.4+3L/1000)µm] [PRO2 model: (2.5+4L/1000)µm]
LED, RGB (PRO2 and PRO3 models: Halogen)
LED, white (PRO2 and PRO3 models: Halogen)
LED, RGB (PRO2 and PRO3 models: Halogen)
Programmable power turret (PRO2 model: Programmable power zoom lens)
300mm/s [200mm/s]
400mm/s [200mm/s]
400mm/s [200mm/s]
300mm/s [200mm/s]
300mm/s [200mm/s]
300mm/s [200mm/s]
399 x 271mm
493 x 551mm
697 x 758mm
200mm
250mm
250mm
20kg [15kg]
40kg [30kg]
50kg [40kg]
859 x 951 x 1609mm
1027 x 1407 x 1778mm
1309 x 1985 x 1794mm
360kg
579kg
1450kg
* The measuring accuracy is defined at the following conditions, Programmable power turret: 1X, Objective set: 2.5X, L = Dimension between two arbitrary points (mm)
In PRO2, the zoom magnification is 3X.
**Including machine stand
N-2
Refer to the QUICK VISION leaflet (E4125) for
more details.
QV ACCEL
SERIES 363 — CNC Vision Measuring System
FEATURES
Image Multi-AutoFocus
The optimal focus can be selected
for each surface texture and
measured feature, realizing high
reproducibility and reliable edge
detection.
Pattern
focus
Surface focus
Moving-bridge type structure
Designed with primary focus on
measurement efficiency, the machine adopts
a more rigid construction and drives the X
and Y axes at 400mm/s (QV ACCEL808,
ACCEL1010), which is approximately 30%
faster than that of standard QV Apex
models. The moving-bridge type structure
also eliminates the need for a moving
stage. This facilitates a more simplified
design of the workpiece fixture, resulting
in a significant reduction in the manhours required for fixture fabrication and
inspection.
Edge focus
QV ACCEL808PRO
Programmable Ring Light (PRL)
Fine control of obliquity and direction provides illumination
optimal for measurement. Obliquity can be arbitrarily set in the
range from 30° to 80°. This type of illumination is effective for
enhancing the edge of inclined surfaces or very small steps.
Illumination can be controlled independently in every
direction, back and forth, right and left. Measurement with
edge enhancement is possible by forming a shadow by
lighting from only one direction.
Parabolic
mirror
Four-quadrant
LED light
Toroidal mirror
QV ACCEL1212PRO
Workpiece
surface
30°
60°
80°
RGB Color LED Illumination
Changing the illumination color to red, green, blue, or white
(synthesized) allows detection of edges which could not be
measured with conventional white light.
SPECIFICATIONS
Model No.
Range
Laser Auto Focus
(LAF) Function*
Mitutoyo offers models
featuring the LAF system which
enables high-speed focusing.
Refer to page N-7 for more
details. *Available to PRO2 / 3 models.
Optional Index table*
Automatic multi-plane
measurement is possible with
the optional index table. Refer
to page N-7 for more details.
*Not available with QV ACCEL models
X-axis
Y-axis
Z-axis
Resolution
High-sensitivity CCD camera
Accuracy*
E1XY
E1Z
E2XY
Max. drive speed X/Y-axis
Z-axis
Illumination
Surface
(PRL: Programmable
Contour
Ring Light)
PRL
Magnification change system
Stage glass size
Dimensions (W x D x H)
Mass
QV ACCEL808PRO
QV ACCEL1010PRO
QV ACCEL808PRO3 QV ACCEL1010PRO3
800mm
1000mm
800mm
1000mm
150mm
150mm
0.1µm
B&W (PRO3 model: color)
(1.5+3L/1000)µm
(1.5+4L/1000)µm
(2.5+4L/1000)µm
400mm/s
150mm/s
LED, RGB (PRO3 models: Halogen)
LED, white (PRO3 models: Halogen)
LED, RGB (PRO3 models: Halogen)
Programmable power turret
883 x 958mm
1186 x 1186mm
1475 x 1716 x 1578mm 1912 x 2086 x 1603mm
2570kg
2950kg
QV ACCEL1212PRO
QV ACCEL1212PRO3
1250mm
1250mm
100mm
QV ACCEL1517PRO
QV ACCEL1517PRO3
1500mm
1750mm
100mm
(2.2+3L/1000)µm
(2.5+5L/1000)µm
(3.5+4L/1000)µm
300mm/s
150mm/s
N
1440 x 1440mm
1714 x 1968mm
2166 x 2340 x 1554mm 2440 x 2868 x 1554mm
3600kg
4500kg
* The measuring accuracy is defined at the following conditions, Programmable power turret: 1X, Objective set: 2.5X, L = Dimension between two arbitrary points (mm)
Optional Accessories: Refer to page N-7.
N-3
QV STREAM PLUS
SERIES 363 — CNC Vision Measuring System
FEATURES
QV STREAM PLUS 606
Non-stop Vision Measurement
Extreme Improvement in Throughput*
Conventional vision measuring systems endlessly repeat the
cycle of stage displacement, stage stop, measurement, stage
start and stage displacement again. This mode of operation
is a fundamental limitation on improving measurement
throughput.
In contrast, the Quick Vision Stream system uses an
innovative image capture technique that avoids the need
to repeatedly stop the stage so measurement can be
continuous, but measuring accuracy is retained. Eliminating
the time needed to accelerate, decelerate and then hold the
stage motionless while a measurement is made achieves a
extreme improvement in productivity.
Measurement Throughput Comparison between QV
STREAM and the Conventional System
STREAM PLUS series: more than 5 times
Camera
Moves continuously
*Comparison of measurement throughput using a Mitutoyo sample workpiece
with that of Mitutoyo conventional systems
Camera
Post image
processing
(Flash & Capture)
(Flash & Capture)
(Flash & Capture)
QV Apex 302
Choice of based machine
In addition to the standard
QV Apex is available as a
based machine.
(Flash & Capture)
QV STREAM PLUS 404
STREAM Mode
The measurement mode of a non-stop vision measuring
system is referred to as the STREAM mode.
Newly Developed Stroboscopic Illumination System
The development of a high-intensity LED flash illuminator
made non-stop vision measurement possible. At the precise
moment the stage reaches a measurement point the
illuminator creates an extremely short, high-intensity flash
that effectively freezes all motion. The illuminator turns on
and off so fast that no image blur occurs and the image is
captured in full and accurate detail.
This innovative design takes full advantage of high-density,
high-intensity LED arrays aided by collimating lenses and
dichroic mirrors to produce ultra bright, directional and
efficient illumination.
High-density mounting of
ultra-high intensity LED elements
Collimator lens array
Collimator lens array
Dichroic
mirrors
SPECIFICATIONS
Model No.
Range
N
X-axis
Y-axis
Z-axis
Resolution
High-sensitivity CCD camera
Accuracy*
E1XY
E1Z
E2XY
Max. drive speed (X/Y/Z-axis)
Max. measuring speed
Illumination
Surface
(PRL: Programmable Ring
Contour
Light)
PRL
Magnification change system
Stage glass size
Max. stage loading
Dimensions (W x D x H)**
Mass**
QV STREAM PLUS 302
QV STREAM PLUS 404
QV STREAM PLUS 606
300mm
400mm
600mm
200mm
400mm
650mm
200mm
250mm
250mm
0.1µm
B&W, progressive scan CCD
(1.5+3L/1000)µm
(1.5+4L/1000)µm
(2.0+4L/1000)µm
300mm/s
XY: 400mm/s, Z:300mm/s
XY: 400mm/s, Z:300mm/s
40mm/s
40mm/s
40mm/s
Hi-intensity LED [stroboscopic (B) and continuous (RGB & W) illumination, switchable]
Hi-intensity LED [stroboscopic (B) and continuous (B) illumination, switchable]
Hi-intensity LED [stroboscopic (B) and continuous (RGB & W) illumination, switchable]
Programmable power turret
399 x 271mm
493 x 551mm
697 x 758mm
20kg
40kg
50kg
859 x 951 x 1609mm
1027 x 1407 x 1778mm
1309 x 1985 x 1794mm
360kg
579kg
1450kg
*
The measuring accuracy is defined at the following conditions
Programmable power turret: 1X Objective set: 2.5X
L = Dimension between two arbitrary points (mm)
** Including machine stand
N-4
LED
elements
Reflection
mirrors
Red LED
Green LED
Dichroic
mirrors
Blue LED
Mirror-2
Syn
Mirror-1
the
tic
cya
n
Stage
QV HYBRID TYPE1, TYPE3
SERIES 365 — CNC Vision Measuring System
FEATURES: Hybrid Type1
• The focusing point method minimizes the difference in the
measuring face reflectance and realizing high measurement
reporducibility.
• The double pinhole method (less directivity) is employed as
the measurement principle.
Laser head
Pinhole
Vision head
(rear)
Photodiode
b
Photodiode
a
FEATURES
The Quick Vision Hybrid is a
complex machine which allows
vision measurement with both
a CCD camera and high-speed
scanning by applying a vision
measurement unit in parallel
with a non-contact displacement sensor.
QVH Apex404
Pinhole
(front)
Laser source
Objective
Workpiece
surface
Holo-scale
Laser Beam Safety Precautions
This system uses a low-power invisible laser beam (780nm) which
corresponds to a CLASS 1 (invisible radiation) of IEC60825-1 for
measurement. The CLASS 1 laser warning label as shown below is
attached to the main unit.
FEATURES: Hybrid Type3
• Enables surface roughness or thickness measurement of
thin and transparent objects such as film.
Measurable thickness: 25 to 300μm
• Enables detection of high inclination angles both for
mirrored surfaces and diffusing surfaces.
Maximum tracking inclination angle ±87˚ (diffusing surface)
• Realizes high-resolution and high-accuracy height
measurement by the wavelength confocal method using
axial chromatic aberration.
*For Type3, due to the white halogen light, it is not applicable to jIS C 6802
“Radiation safety standard of laser products”.
Applications
•Measurement of BGA/CSP bump height and coplanarity of
IC packages
Peak point
Scanning direction
Bump height
SPECIFICATION: QV Apex-based
QVH Apex302
QVH Apex404
Vision
300 x 200 x 200mm
400 x 400 x 250mm
Non-contact dis- Type1 180 x 200 x 200mm
280 x 400x 250mm
placement sensor Type3 176 x 200 x 200mm
276 x 400 x 250mm
Accuracy** E1XY
(1.5+3L/1000)µm
E1Z
(1.5+4L/1000)µm / (1.5+4L/1000)µm*
E2XY
(2.0+4L/1000)µm
Model No.
Range
* Using Non-contact displacement sensor
**The measuring accuracy is defined at the following conditions
Programmable power turret: 1X, Objective set: 2.5X, L = Dimension between two arbitrary points (mm)
SPECIFICATION: QV STREAM PLUS-based
QVH STREAM PLUS302 QVH STREAM PLUS404
Vision
300 x 200 x 200mm
400 x 400 x 250mm
Non-contact dis- Type1 180 x 200 x 200mm
280 x 400 x 250mm
placement sensor Type3 176 x 200 x 200mm
276 x 400 x 250mm
Accuracy** E1XY
(1.5+3L/1000)µm
E1Z
(1.5+4L/1000)µm / (1.5+4L/1000)µm*
E2XY
(2.0+4L/1000)µm
Model No.
Range
QVH STREAM PLUS606
600 x 650 x 250mm
480 x 650 x 250mm
476 x 650 x 250mm
* Using Non-contact displacement sensor
**The measuring accuracy is defined at the following conditions
Programmable power turret: 1X, Objective set: 2.5X, L = Dimension between two arbitrary points (mm)
SPECIFICATION: Hyper QV-based
Hyper QVH302
Hyper QVH404
Vision
300 x 200 x 200mm
400 x 400 x 250mm
Non contact dis- Type1 180 x 200 x 200mm
280 x 400 x 250mm
placement sensor Type3 176 x 200 x 200mm
276 x 400 x 250mm
Accuracy** E1XY
(0.8+2L/1000)µm
E1Z
(1.5+2L/1000)µm / (1.5+2L/1000)µm*
E2XY
(1.4+3L/1000)µm
Model No.
Range
• Curved-form analysis (MSHAPE-QV)
2D/3D contour lines display
2D/3D unfiltered profile display
Shadow graph display
Curved plane analysis
Unfiltered profile analysis, etc.
QVH Apex606
600 x 650 x 250mm
480 x 650 x 250mm
476 x 650 x 250mm
Hyper QVH606
600 x 650 x 250mm
480 x 650 x 250mm
476 x 650 x 250mm
* Using Non-contact displacement sensor
**The measuring accuracy is defined at the following conditions
Programmable power turret: 1X, Objective set: 2.5X, L = Dimension between two arbitrary points (mm)
SPECIFICATION: QV ACCEL-based
• Data processing (QV Graph)
3D Bar chart display
3D Surface chart display
2D continuous cross-section graph display
Model No.
QVH ACCEL808
QVH ACCEL1010
Range Vision
800 x 800 x 150mm 1000 x 1000 x 150mm
Non contact dis- Type1 680 x 800 x 150mm 880 x 1000 x150mm
placement sensor
Accuracy**
E1XY (1.5+3L/1000)µm
E1Z
(1.5+4L/1000)µm / (1.5+4L/1000)µm*
E2XY (2.5+4L/1000)µm
QVH ACCEL1212
QVH ACCEL1517
1250 x 1250 x 100mm 1500 x 1750 x 100mm
1130 x 1250 x 100mm 1380 x 1750 x 100mm
(2.2+3L/1000)µm
(2.5+5L/1000)µm / (1.5+4L/1000)µm*
(3.5+4L/1000)µm
* Using Non-contact displacement sensor
**The measuring accuracy is defined at the following conditions
Programmable power turret: 1X, Objective set: 2.5X, L = Dimension between two arbitrary points (mm)
Main Unit
Startup System
This machine incorporates a startup system (relocation detection system), which disables
operation when an unexpected vibration is applied or the machine is relocated. Be sure to
contact your nearest Mitutoyo prior to relocating this machine after initial installation. Refer
to page IX for details.
N-5
N
ULTRA QV
SERIES 363 — Ultra-high Accuracy CNC Vision Measuring System
FEATURES
Standard glass scale
•Minimizes straightness errors through the
use of a precision air-bearing linear guide
system.
•Utilizes a 0.01μm resolution glass scale
manufactured at an ultra-precision facility
located eleven meters underground.
•Minimizes accuracy fluctuation against
thermal change through the use of virtually
zero thermal expansion glass scales.
•Optimizes the mechanical structure of
the main unit in Finite Element Method
analysis.
•Stabilizes the geometrical accuracy
(i.e. straightness of each axis and
perpendicularity) to lessen thermal effects.
Ultra-high accuracy crystallized glass scale with virtually zero
thermal expansion
The Ultra Quick Vision is equipped with a crystallized glass
scale having a resolution of 0.01µm and linear expansion
coefficient of 0.08x10-6/K. This virtually zero thermal
expansion means the Ultra Quick Vision can minimize
accuracy fluctuation resulting from thermal changes.
ULTRA QV404 PRO
Ultra-precision manufacture eleven meters underground
By using FEM (Finite-Element Method) analysis of the base
design, the placement of stiffening ribs and beams has been
determined for the Ultra Quick Vision to provide optimal
structural rigidity.
SPECIFICATIONS
ULTRA QV404 PRO
400mm
400mm
200mm
Resolution
0.01µm
High-sensitivity CCD camera B&W
Accuracy*
E1XY
(0.25+L/1000)µm
(20°C±0.2°C) E1Z
(1.5+2L/1000)µm
[(1+2L/1000)µm: 10 - 60mm]
E2XY
(0.5+2L/1000)µm
Max. drive speed (X/Y/Z-axis) 150mm/sec
Illumination
Surface
Halogen
(PRL: Programmable
Contour
Halogen
Ring Light)
PRL
Halogen
Magnification change system Programmable power turret
Stage glass size
493 x 551mm
Max. stage loading
40kg
Dimensions (W x D x H)**
1200 x 1735 x 1910mm
Mass**
2150kg
Model No.
Range
N
X-axis
Y-axis
Z-axis
* The measuring accuracy is defined at the following conditions
Programmable power turret: 1X, Objective set: 5X
L = Dimension between two arbitrary points (mm)
**Including machine stand
N-6
Accessories for Quick Vision
Objectives
Objective
Order No.
QV-SL0.5X
QV-HR1X
QV-SL1X
QV-HR2.5X
QV-SL2.5X
QV-5X
QV-HR10X
QV-10X
QV-25X
02AKT199
02AKT250
02ALA150
02AKT300
02ALA170
02ALA420
02AKT650
02ALG010
02ALG020
Working
distance
30.5mm
34mm
52.5mm
40.6mm
60mm
33.5mm
20mm
30.5mm
13mm
The monitor magnification and field of view values are for the
PRO machine.
QV-10X, QV-25X: Depending on the workpiece the illumination
may be insufficient at a turret lens magnification of 2X and 6X.
QV-25X: The PRL illumination is restricted in its usable position.
Objective
QV-SL0.5X
QV-HR1X
QV-SL1X
QV-HR2.5X
QV-SL2.5X
QV-5X
QV-HR10X
QV-10X
QV-25X
QV Index Head
Automatic multi-plane measurement is possible
with the optional index table.
Turret lens
mag.
1X
2X
6X (4X)
1X
2X
6X (4X)
1X
2X
6X (4X)
1X
2X
6X (4X)
1X
2X
6X (4X)
1X
2X
6X (4X)
Monitor mag.
View Field
15X
30X
90X (60X)
30X
60X
180X (120X)
75X
150X
450X(300X)
150X
300X
900X (600X)
300X
600X
1800X (1200X)
750X
1500X
4500X (3000X)
12.54 x 9.4
6.27 x 4.7
2.09 x 1.56 (3.13 x 2.35)
6.27 x 4.7
3.13 x 2.35
1.04 x 0.78 (1.56 x 1.17)
2.5 x 1.88
1.25 x 0.94
0.41 x 0.31 (0.62 x 0.47)
1.25 x 0.94
0.62 x 0.47
0.20 x 0.15 (0.31 x 0.23)
0.62 x 0.47
0.31 x 0.23
0.10 x 0.07 (0.15 x 0.11)
0.25 x 0.18
0.12 x 0.09
0.04 x 0.03 (0.06 x 0.04)
Calibration glass chart &
Compensation glass chart
A calibration chart is used to compensate
for the pixel size of the CCD chip, autofocus
accuracy and the optical axis offset at each
magnification of the Programmable Power
Turret (PPT).
Laser Auto Focus Function*
Max. workpiece diameter
Max. workpiece mass
Min. rotation angle
Positioning accuracy
Max. rotation speed
140mm
2kg
0.1°
±0.5°
10rpm
The system can be equipped with the Laser
Auto Focus unit that allows a stable, highspeed height measurement during high-speed
travel. This unit provides stable measurement
results with minimum dependence on surface
inclination since the double pinhole method is
adopted in the detection system.
Objective
Measurement principle
Laser spot diameter
Repeatability
QV-HR2.5X
Double pinhole method
3µm
s = 0.4µm
*Available for specific models.
RGB color filtering unit
The color filtering function can be added to the
vertical reflected illumination or programmable
ring light in Quick Vision models that use a
halogen light source. This function enhances
the visibility of low-reflection surfaces on
colored workpieces, facilitating edge detection.
This function can also be retrofitted to a
conventional Quick Vision. In addition, a yellow
filter enables vision measurement in the yellow
light region, which provides high sensitivity.
Coaxial laser auto-focus
Detector b
Pinhole
Detector a
Half mirror
N
Pinhole
Lens
Example: Height of leads from a QFP package
Objective
Red filter used
Laser Beam Safety Precautions
This system uses a low-power visible laser beam which
corresponds to a CLASS 1 (visible radiation) of IEC 60825 for
measurement. The CLASS 1 laser warning label as shown below
is attached to the main unit.
N-7
Quick Scope
SERIES 359 — CNC / Manual Vision Measuring System
FEATURES: CNC model
QS200Z
SPECIFICATIONS
Model No.
Range
X-axis
Y-axis
Z-axis
Resolution
Scale type
Measuring accuracy (at 20°C)*
Magnification
Objective
On monitor
Image detecting unit
Illumination
Stage glass size
Max. workpiece height
Max. stage loading
Dimensions (W x D x H), Mass
QS200
QS250
QS200Z
200mm
200mm
200mm
200mm
250mm
200mm
100mm
100mm
100mm
0.5µm
Linear encoder
XY: (2.5+6L/1000)µm, Z: (5+6L/1000)µm
2.5X, 1X, 5X
2.5X, 1X, 5X
0.5X - 3.5X zoom
105X (at 2.5X)
105X (at 2.5X)
21X - 147X
Color CCD camera
Surface: co-axial light, fiber-optic ring light Contour: stage light
269 x 261mm
269 x 311mm
269 x 261mm
110mm
110mm
110mm
10kg
10kg
10kg
465 x 815 x 663mm, 76kg
QS250Z
200mm
250mm
100mm
•Surface, contour and fiber-optic ring light
illumination options enables users to
configure the QS lighting to meet a variety of
measurement needs.
•Powerful, Windows® based QSPAK software
is easy to use and offers a wide spectrum of
measuring and analysis capabilities.
•Functions include zoom, auto-focus,
measurement playback, one-click edge
detection, graphic display, 48 different macros
and a pattern matching function for several
common part features.
•The stage can be controlled by mouse or
through the optional multi-function control
box.
0.5X - 3.5X zoom
21X - 147X
269 x 311mm
110mm
10kg
*When using 2.5X objective or the zoom lens in 2.5X magnification (Magnification on monitor: 105X), L = Measuring length (mm)
FEATURES: Manual model
QS-L2010/AFB
SPECIFICATIONS
N
Model No.
Range (X-axis / Y-axis / Z-axis)
Resolution
Scale type
Measuring accuracy (at 20°C)*
Magnification
Objective
On monitor
Image detecting unit
Illumination
Stage glass size
Max. workpiece height
Max. stage loading
Dimensions (W x D x H), Mass
QS-L2010/AFB
QS-L2010Z/AFB
QS-L2010ZB
QS-E2010B
200 x 100 x 150mm
0.1µm
Linear encoder
XY: (2.5+20L/1000)µm, Z: (5+6L/1000)µm
2.5X, 1X, 5X
0.5X - 3.5X zoom
0.5X - 3.5X zoom
2.5X, 1X, 5X
105X (at 2.5X)
21X - 147X
21X - 147X
105X (at 2.5X)
Color CCD camera
Color CMOS camera
Surface: co-axial light, fiber-optic ring light Contour: stage light
269 x 261mm
269 x 311mm
269 x 261mm
269 x 311mm
150mm
150mm
150mm
150mm
10kg
10kg
10kg
10kg
618 x 700 x 676mm, 56kg (618 x 752 x 682mm, 57kg: QS-E1020B)
*When using 2.5X objective or the zoom lens in 2.5X magnification (Magnification on monitor: 105X), L = Measuring length (mm)
N-8
•Excellent surface observation model for a wide
variety of workpieces.
•0.1µm resolution and 150mm Z-axis range.
•Power zoom enables easy and fast
magnification change.
(QS-L2010/AFB is a fixed-magnification type)
•Fine illumination capability enables lighting
changes to match workpiece requirements.
•The quick release system on the stage enables
instant switching between coarse movement
and fine movement.
•Quick Navigation function enables the user to
repeat measurements quickly.
•An auto-focus function is available for QSL2010/AFB and QS-L2010Z/AFB.
Refer to the QUICK SCOPE leaflet (E4142) for
more details.
Quick Image
SERIES 361 — Non-contact 2-D Vision Measuring System
Quick Image is a new concept in 2-D vision
measuring instruments. It provides unique
features for improving measurement
efficiency.
Refer to the QUICK IMAGE leaflet (E4242) for
more details.
FEATURES
•Long focal depth and wide field of view
•Telecentric optical system
•Mega-pixel color CCD camera
•Large quadrant LED ring light
QI-A2010B
QI-B4020B
SPECIFICATIONS
Model
Range
Measuring mode
Accuracy
X, Y-axis
Z-axis
Within the screen
U1XY
Repeatability within the screen (±2s)
CCD camera
Optical system
Magnification*
Working distance
Depth of focus
Illumination
Contour
Surface
4-quadrant LED
Stage glass size
Max. stage loading
Mass
QI-A505B QI-B505B QI-A1010B QI-B1010B QI-A2010B QI-B2010B QI-A2017B QI-B2017B QI-A3017B QI-B3017B QI-A4020B QI-B4020B
50 x 50mm
100 x 100mm
200 x 100mm
200 x 170mm
300 x 170mm
300 x 170mm
25mm
100mm
100mm
100mm
100mm
100mm
High-resolution mode and Normal mode
QI-A models: ±5µm (high-resolution mode), ±8µm (normal mode) [QI-B models: ±2.7µm (high-resolution mode), ±4µm (normal mode)]
±(5+0.08L)µm L = measuring length (mm)
QI-A models: ±1µm (high-resolution mode), ±2µm (normal mode) [QI-B models: ±0.7µm (high-resolution mode), ±1µm (normal mode)]
Megapixels color CCD camera
0.2X
0.5X
0.2X
0.5X
0.2X
0.5X
0.2X
0.5X
0.2X
0.5X
0.2X
0.5X
90mm
High-resolution mode: ±0.6mm, Normal mode: ±11mm (±1.8mm) ( ): QI-B models
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
86 x 82mm
170 x 170mm
242 x 140mm
260 x 230mm
360 x 230mm
440 x 232mm
5kg
5kg
10kg
20kg
20kg
15kg
20kg
70kg
74kg
140kg
148kg
154kg
*Double telecentric system N-9
N
N
N-10