Planar RS232 User Manual

EP-Series Ultra HD LCD
Displays RS232 User
Guide
Copyright © 8 Jun 2015 by Planar Systems, Inc. All rights reserved.
Contents of this publication may not be reproduced in any form without permission of Planar
Systems, Inc.
Trademark Credits
Windows™ is a trademark of Microsoft Corp.
All other companies are trademarks or registered trademarks of their respective companies.
Disclaimer
The information contained in this document is subject to change without notice. Planar
Systems, Inc. makes no warranty of any kind with regard to this material. While every
precaution has been taken in the preparation of this manual, the Company shall not be liable
for errors or omissions contained herein or for incidental or consequential damages in
connection with the furnishing, performance, or use of this material.
Warranty and Service Plans
Planar warranty and service plans will help you maximize your investment by providing great
support, display uptime, and performance optimization. From post-sale technical support to
a full suite of depot services, our services are performed by trained Planar employees. When
you purchase a Planar product, you get more than a display, you get the service and support
you need to maximize your investment. To find the latest warranty and service information
regarding your Planar product, please visit http://www.planar.com/support
RoHS Compliance Statement
The Planar EP-Series is fully RoHS compliant.
Part Number: 020-1289-00
RS232 Codes
RS232 control is not necessary for operation, but is a convenient way to control
displays from a computer at a distance. Most things you can do with the remote, you
can do with RS232 commands. Plus, you can send inquiries to the displays and find
out the current settings and values.
1 RS232 Command Format
STX(1byte) + IDT(1byte)+ Type(1byte)+ CMD(3bytes)+ [Value/Reply(1byte)] +
ETX(1byte)
STX: Start byte = 07
IDT: Don’t care
Type: Read or Write command, 01: read, 02: write; 00: return to host (from
monitor)
CMD: As shown in the table on the following pages
Value: Setting Value of “Write Command”
Reply: Return Value of monitor
ETX: End byte = 08
Transmit from PC (Host)
Read command: 07 IDT 01 CMD 08 (7bytes)
Write/Setting command: 07 IDT 02 CMD VAL 08 (8bytes)
Return from Monitor: Sent after receiving any valid command. The response CMD is
the same as the received CMD.
2 Serial Port Setting
Baud Rate
19200
Data Bit
8
Parity Bit
None
Stop Bit
1
Baud rate can be set to 115200, 38400, 19200, or 9600 to match the monitor baud
rate setting.
Baud rate 19200 is the default setting.
Explanation of symbols
▲: Valid command on Power saving/ off mode (The setting of “Wake Up from Sleep”
must be “VGA, Digital, RS-232”).
EP-Series Ultra HD LCD Displays RS232 User Guide
1
RS232 Codes
Main Item
Control Item
CMD
Type
Power
Control and
Input Source
Power
Control
POW
W/R
IPC Control
Input Source
Display
Adjustment
Color
Noise
Reduction
2
IPC
MIN
W/R
W/R
Value
(DEC)
Reply (DEC)
Content
CMD
(HEX)
Remark
50 4F 57
▲
00
00
Off (soft power)
01
01
On (soft power)
00
00
Off
01
01
On
00
00
VGA
13
13
DisplayPort
14
14
OPS
9
9
HDMI1
10
10
HDMI2
11
11
HDMI3
12
12
HDMI4
▲
49 50 43
4D 49 4E
BRI
W/R
0~100
Current value Back Light Brightness
42 52 49
BRL
W/R
0~100
Current value Digital Brightness Level
42 52 4C
BLC
W/R
00
00
Off (Back Light)
42 4C 43
01
01
On (Back Light)
CON
W/R
0~100
Current value Contrast
43 4F 4E
SHA
W/R
0~100
Current value Sharpness
53 48 41
HUE
W/R
0~100
Current value Hue
48 55 45
SAT
W/R
0~100
Current value Saturation
53 41 54
NOR
W/R
00
00
Off
4E 4F 52
01
01
Low
02
02
Medium
03
03
High
EP-Series Ultra HD LCD Displays RS232 User Guide
RS232 Codes
Main Item
Control Item
CMD
Type
Display
Adjustment
Local
Dimming
LDM
W/R
MEMC
Scheme
Color
Temperature
MEM
SCM
COT
W/R
W/R
W/R
Value
(DEC)
Reply (DEC)
Content
00
00
Local Dimming Off
01
01
Local Dimming On
00
00
MEMC: Off
01
01
MEMC: Low
02
02
MEMC: Medium
03
03
MEMC: High
00
00
User
01
01
Sport
02
02
Game
03
03
Cinema
04
04
Vivid
00
00
User
01
01
6500K
02
02
9300K
03
03
3200K
06
06
5000K
07
07
7500K
EP-Series Ultra HD LCD Displays RS232 User Guide
CMD
(HEX)
Remark
4C 44 4D
4D 45 4D
53 43 4D
43 4F 54
3
RS232 Codes
Main Item
Control Item
CMD
Type
Display
Adjustment
Gamma
GAC
W/R
4
Value
(DEC)
Reply (DEC)
Content
00
00
Off (Gamma)
01
01
1.85 (Gamma)
02
02
1.9 (Gamma)
03
03
1.95 (Gamma)
04
04
2.0 (Gamma)
05
05
2.05 (Gamma)
06
06
2.15 (Gamma)
07
07
2.15 (Gamma)
08
08
2.2 (Gamma)
09
09
2.25 (Gamma)
10
10
2.3 (Gamma)
11
11
2.35 (Gamma)
12
12
2.4 (Gamma)
13
13
2.45 (Gamma)
14
14
2.5 (Gamma)
15
15
2.55 (Gamma)
16
16
2.6 (Gamma)
CMD
(HEX)
47 41 43
Gain & Offset USR
W/R
0~100
Current value Red Gain (0~100)
55 53 52
USG
W/R
0~100
Current value Green Gain (0~100)
55 53 47
USB
W/R
0~100
Current value Blue Gain (0~100)
55 53 42
UOR
W/R
0~100
Current value Red Offset (0~100)
55 4F 52
UOG
W/R
0~100
Current value Green Offset (0~100)
55 4F 47
UOB
W/R
0~100
Current value Blue Offset (0~100)
55 4F 42
EP-Series Ultra HD LCD Displays RS232 User Guide
Remark
RS232 Codes
Value
(DEC)
Control Item
CMD
Type
Display
Adjustment
VGA
Adjustment
PHA
W/R
0~100
Current value Phase
50 48 41
CLO
W/R
0~100
Current value Clock
43 4C 4F
HOR
W/R
0~100
Current value Horizontal Position
48 4F 52
VER
W/R
0~100
Current value Vertical Position
56 45 52
ADJ
W
00
00
Auto Adjust
41 44 4A
RTY
W/R
0~99
0~99
Year
52 54 59
RTM
W/R
1~12
1~12
Month
52 54 4D
RTD
W/R
1~31
1~31
Day
52 54 44
RTH
W/R
0~23
0~23
Hour
52 54 48
RTN
W/R
0~59
0~59
Minute
52 54 4E
TMS
W/R
0
0
Everyday Mode
54 4D 53
1
1
Workday Mode
2
2
User Mode
RTC
Current Time
Adjustment
Timer Mode
Reply (DEC)
Content
CMD
(HEX)
Main Item
EP-Series Ultra HD LCD Displays RS232 User Guide
Remark
5
RS232 Codes
Value
(DEC)
Control Item
CMD
Type
RTC
Enable
AEN
W/R
0~127
0~127
In User Mode:
41 45 4E
Set bit0 to 1: Sunday
Enable
Set bit1 to 1:
Monday Enable
Set bit2 to 1:
Tuesday Enable
Set bit3 to 1:
Wednesday Enable
Set bit4 to 1:
Thursday Enable
Set bit5 to 1: Friday
Enable
Set bit6 to 1:
Saturday Enable
In Everyday Mode:
Set any bit0~6 to 1:
Mon.~Sun. Enable
In Workday Mode:
Set bit0 to 1: Sunday
Enable
Set any bit1~5 to 1:
Mon.~Fri. Enable
Set bit6 to 1:
Saturday Enable
Disable
AEF
W/R
0~127
0~127
In User Mode:
41 45 46
Set bit0 to 1: Sunday
Disable
Set bit1 to 1:
Monday Disable
Set bit2 to 1:
Tuesday Disable
Set bit3 to 1:
Wednesday Disable
Set bit4 to 1:
Thursday Disable
Set bit5 to 1: Friday
Disable
Set bit6 to 1:
Saturday Disable
In Everyday Mode:
Set any bit0~6 to 1:
Mon.~Sun. Disable
In Workday Mode:
Set bit0 to 1: Sunday
Disable
Set any bit1~5 to 1:
Mon.~Fri. Disable
Set bit6 to 1:
Saturday Disable
6
Reply (DEC)
Content
CMD
(HEX)
Main Item
EP-Series Ultra HD LCD Displays RS232 User Guide
Remark
RS232 Codes
Value
(DEC)
Content
CMD
(HEX)
0~23
Sunday On Hour
49 4E 48
0~59
0~59
Sunday On Minute
53 4E 4D
W/R
0~23
0~23
Sunday Off Hour
53 46 48
SFM
W/R
0~59
0~59
Sunday Off Minute
53 46 4D
NNH
W/R
0~23
0~23
Monday On Hour
4E 4E 48
NNM
W/R
0~59
0~59
Monday On Minute
4E 4E 4D
NFH
W/R
0~23
0~23
Monday Off Hour
4E 46 48
NFM
W/R
0~59
0~59
Monday Off Minute
4E 46 4D
ENH
W/R
0~23
0~23
Tuesday On Hour
45 4E 48
ENM
W/R
0~59
0~59
Tuesday On Minute
45 4E 4D
EFH
W/R
0~23
0~23
Tuesday Off Hour
45 46 48
EFM
W/R
0~59
0~59
Tuesday Off Minute
45 46 4D
DNH
W/R
0~23
0~23
Wednesday On Hour
44 4E 48
DNM
W/R
0~59
0~59
Wednesday On Minute
44 4E 4D
DFH
W/R
0~23
0~23
Wednesday Off Hour
44 46 48
DFM
W/R
0~59
0~59
Wednesday Off Minute
44 46 4D
UNH
W/R
0~23
0~23
Thursday On Hour
55 4E 48
UNM
W/R
0~59
0~59
Thursday On Minute
55 4E 4D
UFH
W/R
0~23
0~23
Thursday Off Hour
55 46 48
UFM
W/R
0~59
0~59
Thursday Off Minute
55 46 4D
INH
W/R
0~23
0~23
Friday On Hour
49 4E 48
INM
W/R
0~59
0~59
Friday On Minute
49 4E 4D
IFH
W/R
0~23
0~23
Friday Off Hour
49 46 48
IFM
W/R
0~59
0~59
Friday Off Minute
49 46 4D
Main Item
Control Item
CMD
Type
RTC
Sunday
SNH
W/R
0~23
SNM
W/R
SFH
Monday
Tuesday
Wednesday
Thursday
Friday
Reply (DEC)
EP-Series Ultra HD LCD Displays RS232 User Guide
Remark
7
RS232 Codes
Value
(DEC)
Content
CMD
(HEX)
0~23
Saturday On Hour
54 4E 48
0~59
0~59
Saturday On Minute
54 4E 4D
W/R
0~23
0~23
Saturday Off Hour
54 46 48
TFM
W/R
0~59
0~59
Saturday Off Minute
54 46 4D
Volume
VOL
W/R
0~100
Current value volume
56 4F 4C
Bass
BAS
W/R
0~12
Current value Bass (-6 ~ 6)
42 41 53
Treble
TRE
W/R
0~12
Current value Treble (-6 ~ 6)
54 52 45
Balance
BAL
W/R
0~12
Current value Balance (-6 ~ 6)
42 41 4C
Internal
Speaker
INS
W/R
00
00
Internal Speaker Off
49 4E 53
01
01
Internal Speaker On
00
00
Mute Off
01
01
Mute On
00
00
Line-In
01
01
HDMI1
02
02
HDMI2
03
03
HDMI3
04
04
HDMI4
05
05
DisplayPort
07
07
OPS
Main Item
Control Item
CMD
Type
RTC
Saturday
TNH
W/R
0~23
TNM
W/R
TFH
Audio
Mute
MUT
Audio Source CAS
Select
OSD
8
W/R
W/R
Reply (DEC)
4D 55 54
43 41 53
Transparency OST
W/R
0~4
0~4
OSD Transparency
4F 53 54
H Position
OSH
W/R
0~100
0~100
OSD H Position
4F 53 48
V Position
OSV
W/R
0~100
0~100
OSD V Position
4F 53 56
EP-Series Ultra HD LCD Displays RS232 User Guide
Remark
RS232 Codes
Main Item
Control Item
CMD
Type
OSD
OSD
Rotation
OSR
W/R
OSD
Language
Content
00
00
Landscape
01
01
Portrait
00
00
English
01
01
Chinese
CMD
(HEX)
4F 53 4C
5~60
Current value OSD Timeout (5, 10, 20,
30, 60 sec)
4F 43 4F
Splash
Screen
W/R
0
0
Off
53 50 53
1
1
On
0
0
Off
1
1
On
00
00
4K2K
01
01
1080P
00
00
4Kx2K
01
01
1080P
00
00
OFF
01
01
PIP Small
02
02
PIP medium
03
03
PIP large
04
04
Dual View
05
05
Dual View Portrait
06
06
Triple View
07
07
Quad View
DisplayPort
SPS
MSB
EDP
EDH
Multi- Source PSC
Views Adjust
W/R
W/R
W/R
W/R
EP-Series Ultra HD LCD Displays RS232 User Guide
Remark
4F 53 52
W/R
HDMI
Multi-Source
W/R
Reply (DEC)
OSD Timeout OSO
Message Box
EDID
OSL
Value
(DEC)
4D 53 42
45 44 50
45 44 48
50 53 43
9
RS232 Codes
Value
(DEC)
Control Item
CMD
Type
Multi-Source
Multi-Source
selection
PIN
W/R
(refer to
MIN)
(refer to MIN) Select the input source
of sub window 1 (refer
to MIN)
50 49 4E
PIO
W/R
(refer to
MIN)
(refer to MIN) Select the input source
of sub window 2 (refer
to MIN)
50 49 4F
PIP
W/R
(refer to
MIN)
(refer to MIN) Select the input source
of sub window 3 (refer
to MIN)
50 49 50
PPO
W/R
00
00
PIP Position Bottom-left
50 50 4F
01
01
PIP Position Bottomright
02
02
PIP Position Top-left
03
03
PIP Position Top-right
PIP position
Content
PIP/Main
Swap
SWA
W
00
00
Swap main and PIP
53 57 41
Multi-Source
Presets
Recall
PRC
W/R
00
00
Preset1 Recall
50 52 43
01
01
Preset2 Recall
02
02
Preset3 Recall
03
03
Preset4 Recall
00
00
Native
01
01
Full Screen
02
02
4:3
03
03
Letterbox
01
01
Full Screen
02
02
4:3
03
03
Letterbox
0~10
0~10
Adjust overscan ratio
Other Control Scaling
ASP
PAS
ZOM
10
Reply (DEC)
CMD
(HEX)
Main Item
W/R
W/R
W/R
EP-Series Ultra HD LCD Displays RS232 User Guide
41 53 50
50 41 53
41 53 50
Remark
RS232 Codes
Main Item
Control Item
Other Control Baud Rate
Adjustment
Power
Saving
Config
Auto Scan
IRFM
Smart Light
Control
Power LED
DisplayPort
Version
HDMI EDID
DisplayPort
EDID
CMD
Type
BRA
W/R
WFS
ATS
IRF
SLC
LED
DPM
EDH
EDP
W/R
W/R
W/R
W/R
W/R
W/R
W/R
W/R
Value
(DEC)
Reply (DEC)
Content
00
00
115200
01
01
38400
02
02
19200
03
03
9600
0
0
Wake on VGA
1
1
Wake on All
2
2
Always On
0
0
Off
1
1
Main
2
2
Multi
3
3
All
0
0
Off
1
1
On
0
0
Off
1
1
DCR
2
2
Light Sensor
0
0
Off
1
1
On
0
0
DP 1.1
1
1
DP 1.2
00
00
4Kx2K
01
01
1080P
00
00
4Kx2K
01
01
1080P
EP-Series Ultra HD LCD Displays RS232 User Guide
CMD
(HEX)
Remark
42 52 41
57 46 53
41 54 53
49 52 46
53 4C 43
4C 45 44
44 50 4D
45 44 48
45 44 50
11
RS232 Codes
Main Item
Control Item
Other Control OPS Power
Down Check
HDMI RGB
Color Range
Touch
Control
Remote
Control
12
CMD
Type
OPC
W/R
HCR
TOC
RCU
W/R
W/R
W
Value
(DEC)
Reply (DEC)
Content
00
00
Disable OPS power
down check
01
01
Enable OPS power down
check
00
00
Auto Detect
01
01
Full Range
02
02
Limited Range
00
00
Auto (Read Only)
01
01
OPS
02
02
External
14
14
MENU Key
04
04
INFO Key
02
02
UP Key
25
25
DOWN Key
01
01
LEFT Key
03
03
RIGHT Key
18
18
ENTER Key
05
05
EXIT Key
07
07
VGA Key
09
09
HDMI1 Key
12
12
HDMI2 Key
16
16
HDMI3 Key
22
22
HDMI4 Key
08
08
DISPLAYPORT Key
21
21
OPS Key
15
15
SOURCE Key
EP-Series Ultra HD LCD Displays RS232 User Guide
CMD
(HEX)
4F 50 43
48 43 52
54 4F 43
52 43 55
Remark
RS232 Codes
Main Item
Control Item
Other Control Remote
Control
CMD
Type
RCU
W
Value
(DEC)
Reply (DEC)
Content
19
19
P-SOURCE Key
17
17
PIP Key
26
26
P-POSITION Key
06
06
SWAP Key
20
20
SCALING Key
67
67
FREEZE Key
00
00
MUTE Key
23
23
BRIGHT Key
24
24
CONTRAST Key
30
30
AUTO Key
29
29
VOLUME+ Key
27
27
VOLUME- Key
32
32
Preset1 Recall
33
33
Preset2 Recall
34
34
Preset3 Recall
35
35
Preset4 Recall
36
36
Audio Source Main Key
37
37
Audio Source 2 Key
38
38
Audio Source 3 Key
39
39
Audio Source 4 Key
CMD
(HEX)
52 43 55
ALL
W
00
00
Reset all
41 4C 4C
KLC
W/R
00
00
Un-lock keys
4B 4C 43
01
01
Lock keys
SER
R
13 bytes
Read Serial Number
53 45 52
MNA
R
13 bytes
Read Model Name
4D 4E 41
EP-Series Ultra HD LCD Displays RS232 User Guide
Remark
13
RS232 Codes
Main Item
Control Item
Other Control Remote
Control
Ethernet
Setup
Network
Enable
Dynamic IP
CMD
Content
CMD
(HEX)
Read Firmware Version
47 56 45
Reply (DEC)
GVE
R
6 bytes
RTV
R
Current value Read RS232 table
Version
52 54 56
NWE
W/R
0
0
No
4E 57 45
1
1
Yes
0
0
Disable
1
1
Enable
DIP
W/R
44 49 50
Default
LDS
W
0
0
Load default settings
(About 15 seconds.)
4C 44 53
E-Mail Alert
PSA
W/R
0
0
Off (Power Status Alert)
50 53 41
1
1
On (Power Status Alert)
0
0
Off (Source Status Alert)
1
1
On (Source Status Alert)
0
0
Off (Signal Lost Alert)
1
1
On (Signal Lost Alert)
SSA
SLA
Static IP
Settings
14
Value
(DEC)
Type
W/R
W/R
53 53 41
53 4C 41
IP1
W/R
0~255
0~255
Static IP Address 1
49 50 31
IP2
W/R
0~255
0~255
Static IP Address 2
49 50 32
IP3
W/R
0~255
0~255
Static IP Address 3
49 50 33
IP4
W/R
0~255
0~255
Static IP Address 4
49 50 34
MK1
W/R
0~255
0~255
Subnet Mask 1
4D 4B 31
MK2
W/R
0~255
0~255
Subnet Mask 2
4D 4B 32
MK3
W/R
0~255
0~255
Subnet Mask 3
4D 4B 33
MK4
W/R
0~255
0~255
Subnet Mask 4
4D 4B 34
GW1
W/R
0~255
0~255
Gateway 1
47 57 31
GW2
W/R
0~255
0~255
Gateway 2
47 57 32
GW3
W/R
0~255
0~255
Gateway 3
47 57 33
EP-Series Ultra HD LCD Displays RS232 User Guide
Remark
RS232 Codes
Value
(DEC)
Reply (DEC)
Content
CMD
(HEX)
Main Item
Control Item
CMD
Type
Ethernet
Setup
Static IP
Settings
GW4
W/R
0~255
0~255
Gateway 4
47 57 34
FD1
W/R
0~255
0~255
DNS Address 1
46 44 31
FD2
W/R
0~255
0~255
DNS Address 2
46 44 32
FD3
W/R
0~255
0~255
DNS Address 3
46 44 33
FD4
W/R
0~255
0~255
DNS Address 4
46 44 34
SNS
W
0
0
Save Static IP Settings
53 4E 53
EP-Series Ultra HD LCD Displays RS232 User Guide
Remark
15
Example
Example
Power Control and Input Source
Turn monitor power off [CMD: POW]
[Transmit] : PC → 07 01 02 50 4F 57 00 08 → Monitor
[Return] : Monitor → 07 01 00 50 4F 57 00 08 → PC
Turn monitor power on [CMD: POW]
[Transmit] : PC → 07 01 02 50 4F 57 01 08 → Monitor
[Return] : Monitor → 07 01 00 50 4F 57 01 08 → PC
Read Power Status from monitor [CMD: POW]
[Transmit] : PC → 07 01 01 50 4F 57 08 → Monitor
[Return] : Monitor → 07 01 00 50 4F 57 XX 08 → PC
XX = 0, the set is off. XX = 1, the set is on.
Display Adjustment
Read back light from monitor [CMD: BRI] (If the setting of back light is 80)
[Transmit] : PC → 07 0101 42 52 49 08 → Monitor
[Return] : Monitor → 07 01 00 42 52 49 50 08 → PC
Set back light 80 to monitor [CMD: BRI]
[Transmit] : PC → 07 01 02 42 52 49 50 08 → Monitor
[Return] : Monitor → 07 01 00 42 52 49 50 08 → PC
Set Contrast 30 to monitor [CMD: CON]
[Transmit] : PC → 07 01 02 43 4F 4E 1E 08 → Monitor
[Return] : Monitor → 07 01 00 43 4F 4E 1E 08 → PC
Read Contrast from monitor [CMD: CON] (If the monitor contrast setting is 50)
[Transmit] : PC → 07 0101 43 4F 4E 08 → Monitor
[Return] : Monitor → 07 01 00 43 4F 4E 32 08 → Monitor
16
EP-Series Ultra HD LCD Displays RS232 User Guide
Scaling Adjustment
Scaling Adjustment
Set monitor to Pillar box [CMD: ASP]
[Transmit] : PC → 07 01 02 41 53 50 02 08 → Monitor
[Return] : Monitor → 07 01 00 41 53 50 02 08 → PC
Other Control
Adjust up to monitor [CMD: RCU]
[Transmit] : PC → 07 01 02 52 43 55 02 08 → Monitor
[Return] : Monitor → 07 01 00 52 43 55 02 08 → PC
Reset all to monitor [CMD: ALL]
[Transmit] : PC → 07 01 02 41 4C 4C 00 08 → Monitor
[Return] : Monitor → 07 01 00 41 4C 4C00 08 → PC
Read serial number monitor [CMD: SER]
[Transmit] : PC → 07 01 01 53 45 52 08 → Monitor
[Return] : Monitor → 07 01 00 53 45 52 S(0) … S(12) 08 → PC , S(0) ~ S(12): serial
number in ASCII
Read firmware version monitor [CMD: GVE]
[Transmit] : PC → 07 01 01 47 56 45 08 → Monitor
[Return] : Monitor → 07 01 00 47 56 45 S(0) … S(5) 08 → PC , S(0) ~ S(5): firmware
version in ASCII
EP-Series Ultra HD LCD Displays RS232 User Guide
17
Accessing Planar’s Technical Support Website
Accessing Planar’s
Technical Support
Website
Go to www.planar.com/support to locate the following support documents and
resources:
• User Guide
• RS232 User Manual
• Touchscreen drivers
• Standard warranties
• Planar support hotline number and email
18
EP-Series Ultra HD LCD Displays RS232 User Guide