Bosch | VG5 100 | Data Sheet - Bosch Security Systems

Video | AUTODOME IP starlight 7000 HD
AUTODOME IP starlight 7000 HD
www.boschsecurity.com
The AUTODOME IP starlight 7000 HD is an easy to
install, high-speed PTZ dome camera, in a field-proven
indoor/outdoor pendant housing or indoor in-ceiling
housing, that delivers unmatched picture quality and
network performance day and night with superb highdefinition (HD) 720p50/60 video and 30x optical
zoom.
The camera provides complete network-based control
of all dome functionality including pan/tilt/zoom
operation, presets, tours and alarms as well as webbased configuration of all dome settings. It also
provides direct network video streaming using H.264
compression / bandwidth throttling to efficiently
manage bandwidth and storage requirements while
delivering outstanding image quality.
u
High-resolution, 720p HD PTZ camera with highperformance 30x zoom lens for capturing fine
details in scenes with extremely low illumination
level
u
Intelligent Tracking and alarm rules engine with onboard Intelligent Video Analytics (IVA)
u
Enhanced system flexibility with dual recording
options (iSCSI, SD card) and dual power source
options (High Power over Ethernet (High PoE) / 24
VAC)
u
Fully configurable quad streaming with individually
configurable streams, based on Bosch’s Common
Product Platform (CPP4)
u
Easy and intuitive installation with multiple
preconfigured user modes that allow users to select
the camera configuration that is ideal for their
applications
Functions
High-performance starlight PTZ camera
Starlight Technology
Extreme low-light sensitivity makes this camera an
exceptional performer in all lighting conditions. In low
light, the camera automatically switches from color to
monochrome by removing the IR filter to boost
sensitivity, while maintaining superior image quality.
For operation in the darkest conditions, automatic
control of shutter speeds increases sensitivity by more
than 50 times.
Starlight models have a 720p50/60 HD imaging
platform with starlight technology. The camera
produces detailed video images in scenes with limited
ambient lighting, without any motion blur associated
with cameras that use slow shutters. The camera has
been tuned to deliver high-quality HD video in both day
and night operation.
2 | AUTODOME IP starlight 7000 HD
Sodium vapor lamp white balance
The camera is an exceptional performer when
capturing video under a sodium vapor lamp (a street
lamp or tunnel lamp, for example). Images under these
conditions may have a yellowish tint, which can make
identification difficult. In the Sodium Vapor White
Balance mode, the camera automatically compensates
for the light from a sodium vapor lamp to restore
objects to their original color.
Five (5) pre-programmed user modes
Five pre-programmed but configurable user modes,
optimized with the best settings for a variety of typical
applications, make on-site programming easy and userfriendly. Users select from the menu the mode that
best defines the environment in which the camera is
installed:
• Outdoor – General day-to-night changes with sun
highlights and street lighting
• Indoor – Ideal mode for indoor applications where
lighting is constant and not changing
• Low light – Optimized for sufficient details at low
light
• Motion – Monitoring traffic or fast moving objects;
motion artifacts are minimized
• Vibrant – Enhanced contrast color reproduction and
sharpness
Users have the ability to customize these modes, if
necessary, for the specific requirements of the site.
Image Stabilization
As PTZ cameras continue to increase their optical
zoom capabilities, image stabilization becomes critical
to eliminate movement caused by unstable camera
mounts. Minor movement of the camera mount can
shift the field of view by a large distance when the
camera is zoomed to a high value. This can render
images unusable. The camera incorporates an Image
Stabilization algorithm that allows the camera to
detect continuous vibration. If it detects vibration, the
camera dynamically corrects the shaky video in both
the vertical and horizontal axis, resulting in
exceptional image clarity and a stable field of view on
the monitor.
Superior privacy masking
The camera provides 24 individual, easy to configure
privacy masks, with up to 8 displayed in the same
scene. As the camera is zoomed, each mask changes
size smoothly and quickly, ensuring that the covered
object cannot be seen in most cases.
Sophisticated alarm responses
The camera supports advanced alarm control that uses
sophisticated rules-based logic to determine how to
manage alarms. In its most basic form, a “rule” could
define which input(s) should activate which output(s).
In a more complex form, inputs and outputs can be
combined with pre-defined or user-specified
commands to perform advanced camera functions.
PTZ drive and mechanism
The AUTODOME 7000 supports 256 pre-positions and
two styles of Guard Tours: Preset and Record/
Playback. Users can configure the preset standard tour
with as many as 256 sequential pre-positions, with a
configurable dwell time between pre-positions. The
AUTODOME Series also provides support for two
recorded tours, which are recorded macros of an
operator’s movements, including pan, tilt, and zoom
activities, and can be played back with the click of a
button.
Pan and tilt preset repeatability are accurate to within
±0.1 degrees to ensure that the correct scene is
captured every time. The camera delivers variable pan/
tilt speeds from a crawl speed of only 0.1 degrees per
second to a full 400 degrees per second. The camera
is capable of pan speeds of 400 degrees per second
and tilt speeds of 300 degrees per second between
prepositions. The camera provides a tilt angle 18
degrees above the horizon, and a pan range of up to
360 degrees continuous rotation.
Content Based Imaging Technology
Content Based Imaging Technology (CBIT) is used to
radically improve image quality in all lighting
conditions and to identify areas for enhanced
processing. The camera examines the scene using
intelligent video analytics and provides feedback to retune the image processing. This provides better detail
in the areas that matter and better all-round
performance. The Intelligent Defog technology, for
example, allows you to view video clearly through a
foggy scene or can improve contrast in dark areas of a
scene.
Intelligent Dynamic Noise Reduction reduces
bandwidth and storage requirements
The camera uses Intelligent Dynamic Noise Reduction
(IDNR) which actively analyzes the contents of a scene
and reduces noise artifacts accordingly.
The low-noise image and the efficient H.264
compression technology combine to provide clear
images while reducing bandwidth and storage by up to
30% compared to other H.264 cameras. This results in
reduced-bandwidth streams that still retain a high
image quality and smooth motion. The camera
provides the most usable image possible by cleverly
optimizing the detail-to-bandwidth ratio.
Intelligent Defog
Users can configure the mode to be active
continuously, or to activate automatically when the
video analytics in the camera detect fog and add light
to the video image (and then deactivate when the fog
clears or the scene changes).
Intelligence
With built-in Intelligent Video Analysis (IVA), the
camera reinforces the concept of Intelligence at the
Edge. IVA is Bosch’s state-of-the-art intelligent video
content analysis technology. With IVA, the camera
reliably detects and analyzes moving objects while
3 | AUTODOME IP starlight 7000 HD
suppressing unwanted alarms from spurious sources
in the image. IVA also allows the camera to detect
multiple object behaviors including idle and removed
objects, loitering, multiple line crossing, and
trajectories. IVA supports BEV (Bird’s-Eye-View)
People Counter and Assisted Self-Calibration.
Configurable detection filters improve reliability and
reduce operator work load.
Intelligent Tracking
The camera utilizes the built-in Intelligent Video
Analytics (IVA) to follow an individual or an object
continuously. Objects detected by IVA in a stationary
position activate the Intelligent Tracking feature,
which controls the pan/tilt/zoom actions of the
camera to keep the tracked object in the scene.
The new tracking feature is based on robust flow
detection algorithms which can reliably track moving
objects even under challenging scenes.
The tracking and detection reliability can be enhanced
further with virtual masking for scenes with a lot of
background “noise” such as trees or other objects
creating constant motion in the scene.
The camera supports three modes for Intelligent
Tracking.
• Auto mode: When configured in this mode, the
camera actively analyzes the video to detect any
moving object. If it detects movement, it begins to
track the object. This mode is most useful for
scenarios where no motion is expected in the scene.
• Click mode: In this mode, users can click an object
moving in the live video image to enable the camera
to track the movement of the selected object. This
mode is most useful for scenarios where normal
scene activity is expected.
• IVA-triggered mode: In this mode, the camera
continuously analyzes the scene for IVA alarms or IVA
rule violations. If an IVA rule is violated, it triggers the
advanced tracking feature of the camera to start
following the object / person that triggered the alarm.
This unique combination of robust IVA and Intelligent
Tracking allows the camera to track moving objects of
interest without getting distracted by other moving
objects in the scene.
Virtual masking
The camera offers Virtual Masking, which gives users
flexibility to mask parts of the scene which should not
be considered for flow analysis to trigger Intelligent
Tracking. This allows users to mask from IVA/Tracking
any background motion (moving trees, pulsating lights,
and busy roads) in the scene without blocking the
motion from the video.
Common product platform (CPP4)
The camera has an advanced, efficient H.264 encoder
(CPP4) embedded for high quality HD streaming video
and very efficient streaming and network capabilities.
The new platform supports simultaneous streaming of
individually configurable HD streams, and allows a
choice of HD resolution in combination of SD
resolutions.
Advanced streaming
The camera offers advanced streaming capabilities so
that you can configure the camera to take advantage of
the latest network technology.
The camera is designed on the most efficient and
powerful H.264 encoding platform capable of
delivering high-quality HD video with very low network
load. The new intelligent encoding capabilities drops
the bandwidth consumption to extremely low levels if
the camera detects no motion in the scene.
The camera is capable of quad streaming which allows
the camera to be configured to deliver independent,
configurable streams for live viewing, recording, or
remote monitoring on constrained bandwidths.
Recording and storage management
A memory card (SD (Secure Digital), SDHC (Secure
Digital High Capacity), or SDXC (Secure Digital
eXtended Capacity)) can be used for local alarm
recording or for scheduled local recording to improve
the overall recording reliability. Recording
management can be controlled by the Bosch Video
Recording Manager (VRM), or the camera can use
iSCSI targets directly without any recording software.
ONVIF conformant
The camera conforms to the ONVIF (Open Network
Video Interface Forum) specification which guarantees
interoperability between network video products
regardless of manufacturer. The ONVIF Profile S
specification allows easy integration with the
conformant devices and VMS. ONVIF conformant
devices are able to exchange live video, audio,
metadata, and control information, and ensure that
they are automatically discovered and connected to
network applications such as video management
systems.
Video management system support
The camera ships with Bosch Video Client (BVC), an
easy-to-use software from Bosch that is suitable for
midsize installations. For large enterprise systems,
AUTODOME cameras can be used with Bosch Video
Management System (BVMS), which allows enhanced
video management and viewing capabilities.
In addition, the camera is supported/integrated into all
of the leading third party video management systems.
Ease of installation and servicing
The camera has been designed for quick and easy
installation; a key feature from Bosch CCTV products.
All housings feature recessed screws and latches for
increased tamper resistance.
Indoor/outdoor pendant housings are rated to provide
IP66 protection and offer an operating temperature
range down to -40 °C (-40 °F). The indoor/outdoor
pendant comes fully assembled with a sunshield and
ready for wall or pipe applications with the proper
mounting hardware (sold separately). In addition, the
camera models with both pendant and in-ceiling
housing come equipped with a low-impact, high-
4 | AUTODOME IP starlight 7000 HD
resolution acrylic bubble for enhanced image clarity.
You can easily convert the outdoor pendant for indoor
applications by removing the sunshield.
Bosch offers a full complement of hardware and
accessories (sold separately) for wall, corner, mast,
roof, pipe mount, and in-ceiling applications for indoor
and outdoor environments, which allow the camera to
be adapted easily to individual site requirements.
Product Safety
Complies with UL, CE, CSA, EN, and IEC
Standards 60950-1 & 22
Environmental
In-ceiling: IP54, Plenum rated (with acrylic
bubble)
Also: IK8 rating when using optional
Polycarbonate bubble (sold separately)
Indoor/Outdoor Pendant: IP66, NEMA 4X
Dual power options
All models can be powered by a High Power-overEthernet (Bosch High PoE)-compliant network using a
Bosch High PoE Midspan (sold separately) over a
single network cable and/or a 24VAC power supply.
When powered using High PoE or PoE+ (IEEE 802.3at
class 4) configuration, only a single cable connection
is required to power and to control the camera while
also viewing images from the camera. For additional
system reliability, users also have the option to
connect the 24 VAC power supply to the camera while
using High PoE.
ONVIF Conformance
EN 50132-5-2
Notice
Conformity to EN 50130-4
One of the following power supply units is
required to conform to the EN 50130-4 standard:
VG4-A-PSU0, VG4-A-PSU1, VG4-A-PSU2, VG4-APA0, VG4-A-PA1, or VG4-A-PA2.
Parts included
In-Ceiling
Fiber Optic Kit
Bosch offers the optional VG4-SFPSCKT, a unique
media converter module for use with various Bosch
devices. This media converter module is designed to
accept a wide-range of 10/100 Mbps SFP modules for
use with Multimode or Single-mode optical fiber with
LC or SC connectors.
The media converter module along with the SFP
module is user-installed directly into the camera‘s
power supply box to provide an integrated fiber optic
solution.
Easy upgrade
Remotely upgrade the camera whenever new firmware
becomes available. This ensures up-to-date products,
thus protecting investment with little effort.
Outdoor Pendant
Quantity
Item
1
AUTODOME IP starlight 7000 HD In-Ceiling camera with
tinted acrylic bubble and white trim ring
1
Interface box
1
Optional black trim ring
1
Ceiling gasket (for IP54 conformance)
1
Product DVD (which includes complete Operation Manual)
1
Packet of printed Safety literature
Quantity
Item
Unsurpassed reliability
As with all Bosch products, the camera is designed
using the industry’s best design process and is
subjected to the most stringent testing standards such
as HALT (highly accelerated life testing).
1
AUTODOME IP starlight 7000 HD Pendant camera with
clear acrylic bubble and sunshield
1
Packet of printed Safety literature
1
Product DVD (which includes complete Operation Manual)
Certifications and approvals
1
Packet of printed Safety literature
HD standards
Complies with the 296M-2001 Standard in:
–
–
–
–
–
Resolution: 1280x720
Scan: Progressive
Color representation: complies with ITU-R BT.709
Aspect ratio: 16:9
Frame rate: 50 and 60 frames/s
Electromagnetic
Compatibility (EMC)
Complies with FCC Part 15, ICES-003, and
CE regulations, including latest versions of
EN 50130-4,
EN 55022:2006 inc. AL:2007,
EN 61000-3-3,
EN 61000-6-1,
EN 61000-6-2, and
EN 50121-4 (Railway applications)
Notes:
–The pendant can be converted to an indoor pendant
by removing the sunshield.
–Mounting hardware and accessories are available
separately.
Technical specifications
AUTODOME IP starlight 7000 HD camera
Imager
1/3-type Exmor CMOS sensor
Effective Picture Elements
(Pixels)
1305 x 1049 (1.37 MP)
5 | AUTODOME IP starlight 7000 HD
Lens
30x Zoom
4.3 mm to 129 mm
F1.6 to F4.7
Field of View (FOV)
2.1° to 59°
Focus
Automatic with manual override
• Turbo Mode
(Manual Control)
Iris
Automatic with manual override
• Normal Mode
Digital Zoom
12x
Pre-position Speed
Pan: 400°/s
Tilt: 300°/s
Pan/Tilt Modes
Pan: 0.1°/s – 400°/s
Tilt: 0.1°/s – 300°/s
Preset
Accuracy
Sensitivity / Minimum Illumination
(typical)
30 IRE
50 IRE
0.1°/s-120°/s
0.1°/s-120°/s
± 0.1° typ.
± 0.1° typ.
Electrical
In-Ceiling
Day Mode (Color)
Fixed shutter 1/30, High Sensitivity
mode On
0.052 lux
0.166 lux
Fixed shutter 1/30, High Sensitivity
mode Off
0.26 lux
0.66 lux
SensUp On (max. ¼), High Sensitivity
mode On
Pan: 400°/s
Tilt: 300°/s
Input Voltage
Pendant
21-30 VAC, 50/60 Hz; (class II)
High PoE (with Bosch Midspan (NPD-6001A);
required to power the heater)
PoE+ (IEEE 802.3at, class 4 standard) (when used indoors,
not powering the heater)
0.0082 lux
0.033 lux
Fixed shutter 1/30, High Sensitivity
mode On
0.0103 lux
0.041 lux
Fixed shutter 1/4, High Sensitivity
mode On
0.00129 lux
---
SensUp On (max. ¼), High Sensitivity
mode On
0.00065 lux
0.00205
lux
Night Mode (Black and white)
Power
Consumption,
typical
24 W / 44
VA
60 W / 69 VA (heaters on)
or
24 W / 44 VA (heaters off / without
heater connected in power supply box
for indoor applications)
Surge Suppression
Note: In Black and White (Night) mode / low light
situations, High Sensitivity turns on automatically.
Additional Camera Settings
Protection on
Alarm Inputs
Peak current 17 A, peak power 300 W
(8/20 μs)
Protection on
Alarm Outputs
Peak current 2 A, peak power 300 W
(8/20 μs)
Protection on
Relay Output
Peak current 7.3 A, peak power 600 W
(10/1000 μs)
Protection on Power
Input (Dome)
Peak current 7.3 A, peak power 600 W
(10/1000 μs)
Peak current 21.4 A, peak power 1500 W
(10/1000 μs)
Peak current 14 A, peak power 200 W
(8/20 μs)
Gain Control
Auto/Manual/Max
Aperture Correction
Horizontal and vertical
Electronic Shutter Speed
(AES)
1/1 sec to 1/10000 sec (22 steps)
Protection on Power
Output (Arm Power
Supply)
Dynamic Range
90 dB typical
10/100 Ethernet
Data Lines
Signal-to-Noise Ratio
(SNR)
>50 dB
Software Control
Backlight Compensation
(BLC)
On/Off
Camera Setup/
Control
White Balance
2000 K to 10,000 K
ATW, AWB Hold, Extended ATW, Manual,
Sodium Lamp Auto, Sodium Lamp
Via web browser (such as Internet Explorer
version 7.0 or later), Bosch Configuration
Manager, Bosch Video Management System
(BVMS), Bosch Recording Station (BRS), or
Bosch Video Client (BVC)
Software Update
Network firmware upload
Day/Night
Monochrome, Color, Auto
Defog mode feature
Improves visibility when viewing foggy or
other low-contrast scenes.
Mechanical
In-Ceiling
Pendant
Pan Range
360° cont.
360° cont.
Tilt Angle
1° above horizon
18° above horizon
Network
Communications
Protocols
Standard Bosch IP protocol, including ONVIF
and SNMP v1
6 | AUTODOME IP starlight 7000 HD
Standards / Video
compression
H.264 (ISO/IEC 14496‑10), M‑JPEG, JPEG
Streaming
Four (4) streams with individually configurable
frame rate and resolution:
• Two (2) independently configurable H.
264 recording streams
• Two (2) non-recording streams
(profiles)
Stream 1 (recording)
Options are:
- H.264 MP 720p50/60 fixed;
- H.264 MP SD
Connectivity
ONVIF Profile S, Auto-MDIX
GOP Structure
IP, IBP, IBBP
Data Rate
9.6 kbps to 6 Mbps
Overall IP Delay
240 ms
Audio
- Standard
G.711, 8 kHz sampling rate
L16, 16 kHz sampling rate
AAC, 16 kHz sampling rate
Note: The options available for Stream 1 depend on
the value in the Max. frame rate field in the Installer
Menu in camera configuration.
- Signal-to-Noise
Ratio
>50 dB
- Audio Streaming
Bidirectional (full-duplex)
Stream 2 (recording)
Local Storage
Non-recording
profiles
Options vary depending on Stream 1
selection.
Options with “H.264 MP 720p50/60 fixed”
selected for Stream 1:
- Copy Stream 1
- H.264 MP SD;
- H.264 MP 720p6/7 fixed;
- H.264 MP upright (cropped);
- H.264 MP D1 4:3 (cropped);
Option with “H.264 MP SD” selected for
Stream 1: H.264 MP SD
Two (2) streams, I-frame only
Options are:
- HD Image Optimized;
- HD Balanced;
- HD Bit Rate Optimized;
- SD Image Optimized;
- SD Balanced;
- SD Bit Rate Optimized;
- DSL Optimized;
- 3G Optimized
Resolution (H x V)
Memory Card Slot
User-supplied SD/SDHC/SDXC memory card
(maximum 2TB – SDXC)
Recording
Continuous recording of video and audio,
alarm/events/schedule recording
Fiber Optic Kit
VG4-SFPSCKT
Description
Fiber Optic Ethernet Media Converter kit 6.
Requires a small form-factor pluggable (SFP)
module (sold separately).
Data Interface
Ethernet
Data Rate
10/100 Mbps
IEEE 802.3 Compliant
Full Duplex or Half Duplex Electrical Port
Full Duplex Optical Port
Compatible Receiver
CNFE2MC
Installation
Installed inside a VG4-A-PA0, VG4-A-PA1,
VG4-A-PA2, VG4‑A‑PSU1, or a VG4‑A‑PSU2
power supply box with supplied mounting
hardware
720p HD
1280 x 720
432p SD
768 x 432
288p SD
512 x 288
SFP Modules
144p SD
256 x 144
Description
Interchangeable modules available for use with
MMF or SMF optical fiber.
Data Interface
Ethernet
Data Rate
10/100 Mbps
IEEE 802.3 Compliant
Protocols
IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/
RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP,
FTP, Telnet, ARP, DHCP, SNTP, SNMP (v1,
MIB-II), 802.1x, DNS, DNSv6, DDNS
(DynDNS.org, selftHOST.de, no-ip.com),
SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS),
LLDP, SOAP, Dropbox, CHAP, digest
authentication
Ethernet
10BASE-T/100BASE-TX, auto-sensing, half/
full duplex
Encryption
TLS 1.0, SSL, DES, 3DES, AES
Ethernet connector
RJ45
6. Kit available separately and must be installed inside the AUTODOME power supply box.
Mechanical
Dimensions (LxWxH)
• SFP-2 and SFP-3
55.5 x 13.5 x 8.5 mm (2.2 x 0.5 x 0.3 in.)
• SFP-25, SFP-26
63.8 x 13.5 x 8.5 mm (2.5 x 0.5 x 0.3 in.)
Weight (all SFP
modules)
0.23 kg (.05 lb)
7 | AUTODOME IP starlight 7000 HD
Type
Connector
Wavelength
(transmit /
receive)
Max. Distance
Alarm Outputs (4)
1 dry contact relay; 3 open collector/
transistor outputs
32 VDC @ 150 ma max.
SFP-2
MMF
Duplex LC
1310 nm /
1310 nm
2 km
(1.2 miles)
Audio
1 x mono line in, 1 x mono line out
SFP-3
SMF
Duplex LC
1310 nm /
1310 nm
20 km
(12.4 miles)
SFP-25
MMF
Single SC
1310 nm /
1550 nm
2 km
(1.2 miles)
SFP-26
MMF
Single SC
1550 nm /
1310 nm
2 km
(1.2 miles)
Fiber Compatibility
Optical Fiber
Compatibility, MMF
50/125 µm MMF. For 50/125 µm fiber,
subtract 4 dB from the specified optical
budget value. Must meet or exceed fiber
standard ITU-T G.651.
Optical Fiber
Compatibility, SMF
8–10/125 µm SMF. Must meet or exceed
fiber standard ITU-T G.652.
Optical Distance
Specifications
Specified transmission distances are limited to
the optical loss of the fiber and any additional
loss introduced by connectors, splices, and
patch panels. The modules are designed to
operate over the entire optical loss budget
range, so they do not require a minimum loss
in order to operate.
Miscellaneous
Sectors/Titling
16 independent sectors with a 20-character
title/sector
Masking
24 individually configurable privacy masks
Pre-positions
256, each with a 20-character title
Guard Tours
Two (2) types of tours:
• Recorded tours – two (2)
• Preset tour – one (1), consisting of up to
256 scenes, consecutively
Supported
Languages
English, Chinese, Dutch, French, German,
Italian, Japanese, Polish, Portuguese, and
Spanish
User Connections
Power, Camera
Power, Heater
• Signal line in
12 kOhm typical, 1 Vrms max
• Signal line out
1 Vrms at 1.5 kOhm, typical
Environmental
Ingress
Protection
Rating/
Standard
In-Ceiling (with acrylic
bubble)
Pendant (with acrylic
bubble)
IP54, Plenum rated
IP66,,NEMA 4X 7
NEMA 4X for:
• Access to Hazardous parts
• Ingress of solid foreign objects (falling dirt,
circulating dust, settling dust)
• Ingress of water (dripping and light splashing,
hosedown and splashing)
• Corrosive agents
Operating
Temp.
-10 °C to 40 °C
(14 °F to 104 °F)
-40 °C to 55 °C
(-40 °F to 131 °F)
or
-10 °C to 55 °C
(14 °F to 131 °F) 8
Storage
Temp.
-40 °C to 60 °C
(-40 °F to 140 °F)
-40 °C to 60 °C
(-40 °F to 140 °F)
Humidity
0% to 90% relative, noncondensing
0% to 100% relative,
condensing
7. Meets requirements for NEMA 4X, except impact test, with use of an acrylic bubble.
8. Without heater connected in power supply box for indoor applications.
Construction
Dimensions
See dimensional drawings
Weight
• In-ceiling
2.58 kg (5.69 lb)
• Indoor/Outdoor
Pendant
3.06 kg (6.75 lb)
Bubble Size
153.1 mm diameter (6.03 in.)
Construction Material
RJ-45 10/100 Base-TX Ethernet (High
Power-over-Ethernet (High PoE)) or PoE+
(IEEE 802.3at, class 4 standard)
21-30 VAC, 50/60 Hz
RJ-45 10/100 Base-TX Ethernet (High
Power-over-Ethernet (High PoE))
21-30 VAC, 50/60 Hz
Video and Control
RJ-45 10/100 Base-TX Ethernet
Alarm Inputs (7)
2 supervised; 5 non-supervised
Programmable for “normally open” or
"normally closed"
• Housing
In-ceiling: Magnesium
Pendant: Cast aluminum
• Bubble
In-ceiling: HD High-resolution acrylic
Pendant: High-resolution acrylic
Standard Color
White (RAL 9003)
Standard Finish
Powder coated, sand finish
Mounts/Accessories
Bubbles
In-ceiling
Clear HD high-resolution acrylic
VGA-BUBHD-CCLA
8 | AUTODOME IP starlight 7000 HD
Tinted HD high-resolution acrylic
(Included with in-ceiling camera models.)
VGA-BUBHD-CTIA
Dimensional Drawings
Pendant
Clear high-resolution acrylic
(Included with pendant camera models.)
VGA-BUBBLE-PCLA
Tinted high-resolution acrylic
VGA-BUBBLE-PTIA
Polycarbonate bubbles are not recommended for use
with HD products because of optical degradation.
Pendant Arm Mounts
Wall Arm (No Transformer)
VG4-A-PA0
Wall Arm (120/230 VAC Transformer)
VG4-A-PA1 /
VG4-A-PA2
Pendant Arm with Wiring
VGA-PEND-ARM
Mounting plate for VGA-PEND-ARM
VGA-PEND-WPLATE
Trim skirt for VG4 Series Power Supplies
VG4-A-TSKIRT
AUTODOME 7000 – Slot for SD card
1 Slot for SD card
22.86
[0.90]
86.7
[3.42]
Optional Mounting Plates for Arm Mounts
Corner Mounting Plate
VG4-A-9542
Mast (Pole) Mounting Plate
VG4-A-9541
299.4
[11.79]
Pendant Pipe Mounts
Pipe Mount Cap
189.0
[7.44]
VG4-A-9543
Pendant Roof Mounts
Roof (Parapet) Mount
(VG4-A-9543 Pipe Mount Cap required. Available separately.)
R 76.6
[3.01]
224.0
[8.82]
188.0
[7.40]
549.6
[21.64]
532.1
[20.95]
469.1
[18.47]
VGA-ROOF-MOUNT
(1.5-inch NPT tapered
male threads)
158.0
[6.22]
169.9
[6.69]
11.0
[0.43]
Optional Mounting Plates for Roof Mounts
Flat Roof Adapter for Parapet Mount
160.0
[6.30]
LTC 9230/01
366.9
[14.44]
201.2
[7.92]
216.4
[8.52]
233.0
[9.17]
In-ceiling Support Kits
Bracket for suspended or drop ceilings
VGA-IC-SP
189.0
[7.44]
Power Supplies
R 76.6
[3.01]
224.0
[8.82]
High PoE Midspan 60W, single port, AC in
NPD-6001A
Outdoor Power Supply Box, no transformer
VG4-A-PSU0
Outdoor Power Supply Box (120/230 VAC
Transformer)
VG4-A-PSU1 /
VG4-A-PSU2
Fiber Optic Kit
VG4-SFPSCKT
mm
[in.]
AUTODOME 7000 Dimensions – Pendant, Pipe
1 Power supply box and
sunshield
4 Power supply box
2 Sunshield removed
5 Trim skirt
3 Mounting plate
186.1
[7.33]
134.6
[5.30]
9 | AUTODOME IP starlight 7000 HD
Accessories
ø 175.99
[6.929]
High PoE Midspan, 60 W, single port, AC in
High Power, 60 W Single Port PoE Midspan with AC in
Order number NPD-6001A
VG4-A-PSU0 24 VAC Power Supply Unit
206.89
[8.145]
Power supply, 24 VAC input, for a PTZ camera in the
AUTODOME Series. White, aluminum enclosure with
cover, rated IP66 and IK 08. 100 W output. Optional
trim skirt (sold separately).
21.29
[0.838]
Order number VG4-A-PSU0
95.88
[3.775]
HD
99.76
[3.928]
IP
VG4-A-PSU1 120 VAC Power Supply Unit
Power supply with transformer, 120 VAC input, for an
AUTODOME or MIC7000 Series PTZ camera. White,
aluminum enclosure with cover, rated IP66 and IK 08.
100 W output. Optional trim skirt (sold separately).
74.65
[2.939]
HD
ø 204.49
[8.051]
mm
[in.]
78.04
[3.072]
IP
AUTODOME 7000 Dimensions – In-ceiling
Order number VG4-A-PSU1
VG4-A-PSU2 230 VAC Power Supply Unit
88.9
3.50
58
2.3
175
6.9
88.9
3.50
5
10.2
0.40
193
7.6
133.4
5.25
178
7.0
254
10.00
16.0 Typ.
0.63
1190.8
46.88
Order number VG4-A-PSU2
378
14.88
6.35
0.25
133.4
5.25
616
24.25
6
101.6 Typ.
4.0
203
8.0 236
9.3
219.1
8.63
111 Typ.
4.37
1-1/2 NPT
69.9
2.75
38
1.5
Ø 10.4
0.41
279.4
11.00
152.4
6.0
346.2
13.63
mm
in.
114.3
4.50 Typ.
279.4
11.0
11.0
04.3
976.1
38.43
1022.4
40.25
VG4-A-PA0 Pendant Arm Mount
170.0
6.69
134.6
5.30
216.4
8.52
10.4
8 x 0.41
228.6
9.0
Power supply with transformer, 230 VAC input, for an
AUTODOME or MIC7000 Series PTZ camera. White,
aluminum enclosure with cover, rated IP66 and IK 08.
100 W output. Optional trim skirt (sold separately).
6.35 Typ.
0.25
88.1
3.47
160.0
6.30
Order number VG4-A-PA0
50.8
2.00
105.0
4.13
AUTODOME Dimensions - Mounts
1 Mast Mount
4 Roof Mount
2 Corner Mount
5 Roof Mount Adapter
3 Pipe Mount
6 Power Supply for Pipe and
Roof Mounts
Ordering information
VG5-7130-EPC4 AUTODOME starlight 7000 HD camera,
720p60, 30x zoom, pendant, with clear bubble
Superb quality indoor/outdoor IP PTZ dome camera.
720p HD resolution; 30x optical zoom; IVA; PoE;
iSCSI/SD; multiple pre-programmed user modes; H.
264 quad-streaming (CPP4); IP66; pendant mount,
clear bubble.
Order number VG5-7130-EPC4
VG5-7130-CPT4 AUTODOME starlight 7000 HD camera,
720p60, 30x zoom, in-ceiling, tinted bubble
Superb quality indoor IP PTZ dome camera. 720p HD
resolution; 30x optical zoom; IVA; PoE; iSCSI/SD;
multiple pre-programmed user modes; H.264 quadstreaming (CPP4); IP66; in-ceiling mount, tinted
bubble.
Order number VG5-7130-CPT4
Pendant arm mount with power supply box for an
AUTODOME Series camera, no transformer, white
VG4-A-PA1 Pendant Arm Mount with 120 VAC Transformer
Pendant arm mount with power supply box for an
AUTODOME Series camera with a 120 VAC
transformer, white
Order number VG4-A-PA1
VG4-A-PA2 Pendant Arm Mount with 230 VAC Transformer
Pendant arm mount with power supply box for an
AUTODOME Series camera with a 230 VAC
transformer, white
Order number VG4-A-PA2
VGA-PEND-ARM Pendant Arm with Wiring
Compatible with an AutoDome Series pendant housing
Order number VGA-PEND-ARM
VGA-PEND-WPLATE Mounting Plate
Mounting plate for VGA-PEND-ARM, compatible with
an AutoDome Series camera
Order number VGA-PEND-WPLATE
VGA-ROOF-MOUNT Roof Mount
Roof parapet mount, white
(VG4-A-9543 Pipe Mount Cap required. Available
separately.)
Order number VGA-ROOF-MOUNT
10 | AUTODOME IP starlight 7000 HD
LTC 9230/01 Flat Roof Mount Adapter
SFP‑2 Small Form‑factor Pluggable Optical Interface
For mounting a unit in an upright position on a flat
surface for roof parapet mount VGA-ROOF-MOUNT
SFP Fiber Optic Module, Multi-mode, 1310 nm, 2 km
(1.2 miles), 2 LC connectors
Order number LTC 9230/01
Order number SFP-2
VG4-A-9541 Pole Mount Adapter
SFP‑3 Small Form‑factor Pluggable Optical Interface
Pole mount adapter for an AUTODOME pendant arm or
a DINION imager, designed for poles with a diameter
of 100‑380 mm (4‑15 in.), white
Order number VG4-A-9541
VG4-A-9542 Corner Mount Adapter
Corner mount adapter for an AUTODOME pendant arm
or a DINION imager
Order number VG4-A-9542
VG4-A-9543 Pipe Mount
Pipe mount, white, for an AutoDome Series pendant
housing
Order number VG4-A-9543
VGA-IC-SP In-ceiling Support Kit for Various Bosch
Dome Cameras
Suspended ceiling support kit for AUTODOME
100/600/7000 Series cameras
Order number VGA-IC-SP
VGA-SBOX-COVER Cover for AutoDome Power Supply
Boxes
Order number VGA-SBOX-COVER
VG4-A-TSKIRT Trim Skirt for AutoDome Power Supply
Boxes
Trim skirt for the following AutoDome Series power
supply boxes:
VG4-A-PSU0, VG4-A-PSU1, and VG4-A-PSU2
Order number VG4-A-TSKIRT
VGA-BUBBLE-PCLA Clear High-resolution Bubble for a
Pendant Housing
Low-impact acrylic bubble
Order number VGA-BUBBLE-PCLA
VGA-BUBBLE-PTIA Tinted High-resolution Bubble for a
Pendant Housing
Low-impact acrylic bubble
Order number VGA-BUBBLE-PTIA
VGA-BUBHD-CCLA Clear HD High-Resolution Acrylic
Bubble for In-Ceiling AUTODOME cameras
Order number VGA-BUBHD-CCLA
VGA-BUBHD-CTIA Tinted HD High-Resolution Acrylic
Bubble for In-Ceiling AUTODOME cameras
Order number VGA-BUBHD-CTIA
VG4‑SFPSCKT Fiber Optic Ethernet Media Converter Kit
Ethernet media converter video transmitter/data
receiver fiber optic kit
Order number VG4-SFPSCKT
SFP Fiber Optic Module, Single-mode, 1310 nm, 20 km
(12.4 miles), 2 LC connectors
Order number SFP-3
SFP‑25 Small Form‑factor Pluggable Optical Interface
SFP Fiber Optic Module, Multi-mode, 1310/1550 nm,
2 km (1.2 miles), 1 SC connector
Order number SFP-25
SFP‑26 Small Form‑factor Pluggable Optical Interface
SFP Fiber Optic Module, Multi-mode, 1550/1310 nm,
2 km (1.2 miles), 1 SC connector
Order number SFP-26
11 | AUTODOME IP starlight 7000 HD
Represented by:
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180
security.sales@us.bosch.com
www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
emea.securitysystems@bosch.com
www.boschsecurity.com
© Bosch Security Systems 2015 | Data subject to change without notice
13930109195 | en, V10, 09. Mar 2015
Asia-Pacific:
Robert Bosch (SEA) Pte Ltd, Security
Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6571 2808
Fax: +65 6571 2699
apr.securitysystems@bosch.com
www.boschsecurity.asia
China:
America Latina:
Bosch (Shanghai) Security Systems Ltd. Robert Bosch Ltda Security Systems Division
203 Building, No. 333 Fuquan Road
Via Anhanguera, Km 98
North IBP
CEP 13065-900
Changning District, Shanghai
Campinas, Sao Paulo, Brazil
200335 China
Phone: +55 19 2103 2860
Phone +86 21 22181111
Fax: +55 19 2103 2862
Fax: +86 21 22182398
latam.boschsecurity@bosch.com
www.boschsecurity.com.cn
www.boschsecurity.com
Download PDF