BROSA Caledonia Rattan Compact Chest of Drawers Assembly Manual

Caledonia Rattan
Compact Chest of Drawers
A S S E M B LY G U I D E
V1
FOR YOUR S A FE T Y
?
Lift, don’t drag. This protects
your floor and product.
Check the assembly guide
for required components.
Assembly requires 2 people.
It's always easier with a
friend.
Assembling this product on
a soft surface protects its
finish.
Avoid loose screws. Tighten
fixtures every few months.
Contact our support online
or call 1300 027 672.
Components
Before you get started, check you have all of the pieces below.
If anything’s missing, we’ll sort it out right away. Simply visit:
www.brosa.com.au/pages/product-return-and-parts-request
① Body x 1
② Leg Frame x 2
Hardware
Ax6
(M6 x 40)
Bx6
(Ø8 x Ø25)
Cx6
(Ø8 x Ø16)
Dx1
(M4)
Step 1
Align the leg frames ② with the holes on the
bottom of the body ①. Make sure the stickers
match as per the diagram below.
Fit a spring washer C to a bolt A followed by a flat
washer B. Insert the bolt into a hole on the leg
frame. Screw the bolt with your hand and leave it
loosely attached. Repeat this for all holes on the
leg frames.
Ax6
Bx6
Cx6
②
A
C
B
①
Step 2
Once all leg frames are fixed in place, tighten all
bolts with the Allen key D.
Dx1
D
Step 3
Place the completed piece of furniture the right
way up in its desired location.
Adjust the foot stoppers to make all legs sit firmly
on the ground.
Step 4
Enjoy your new Caledonia Rattan Compact Chest
of Drawers!
Warning
Serious or fatal crushing injuries can occur from furniture tip-over.
Never allow children to climb or play on furniture.
Anti-Tip Kit Installation
It is STRONGLY RECOMMENDED to install anti-tip kit to avoid furniture
tip-over.
Hardware
ax4
bx2
cx4
dx4
ex4
Wall Fixings
Because of the variety of wall compositions, we can’t provide you with
appropriate wall fixings. Please identify your wall composition and
contact your local hardware store to get the appropriate fixings.
Wood
If fixing to wood
make sure that it
isn’t chipboard as
screws can easily
pull away from the
core structure.
Brick or Masonry
Use an appropriate
wall plug provided
you are sure your
wall is sound.
Cavity Wall
Special toggle wall
plugs are needed.
Seek expert
advice.
What You Need
Step 1
Attach the brackets a securely to the back top of the
unit using the short screws c provided.
ax2
cx4
a
c
Instructions below demonstrate how to attach the kit to the wall using
the wall plugs provided. But please do identify the type of your wall
and choose the appropriate wall fixings.
Step 2
Determine where the piece is to be placed and mark
locations on the wall for the mounting brackets a using a
pencil. Move the furniture out of the way so that the
brackets can then be mounted to the wall.
ax2
a
Step 3
Drill holes for the wall plugs using a drill. Knock the plugs
e into the holes using a hammer. Place the brackets
against the plugs again and fix the brackets with the long
screws d.
dx4
ex4
e
d
Step 4
Lace the nylon strap b down through the brackets. Slide
the thin end of the strap through the receiving end on
the nylon strap. Pull to tighten the piece of furniture snug
against wall.
bx2
b
Troubleshooting
1. Follow the steps below to detach the drawer if needed.
Step 1
Pull the drawer until the levers of the drawer slides come
out as shown in the zoomed-in diagram below.
Step 2
Press down on the lever on one side and up on the
opposite side to disengage the mechanism. Pull the
drawer out while pressing the levers.
2. Follow the step below to reattach your drawer.
Step 1
Line up the slides and push until you hear the “click”
indicating that slides have reengaged.
User Recommendation
Rattan is a natural material which is both durable and flexible. Most
rattan furniture only needs basic cleaning and care to preserve its
natural strength and colour. Follow these steps to keep your rattan
furniture looking beautiful for years to come and ensure its longevity.
Assembly
1. Assemble furniture using our Assembly Guides. You can find them at
support.brosa.com
2. Do not dispose of any packaging or contents of the shipping carton
until assembly is completed to avoid accidentally discarding small
parts or hardware.
3. Furniture can be dangerous if incorrectly assembled. Assembly
should be carried out by competent people.
Placement
1. This product is for indoor use only.
2. Keep furniture on flat, level ground. Placing it unevenly may cause
deformation.
3. Do not place heavy objects on furniture.
4. When repositioning furniture always lift, don’t drag.
5. Keep sharp objects away from furniture. They cause scratches and
splinters to the surface.
6. Do not stack furniture.
General Cleaning and Maintenance
1. Clean furniture regularly with a white soft cloth. Slightly damp fabrics
help absorb dust, but remember to dry it once you’re done.
2. Clean spills and stains immediately with a clean cloth. As long as
you’re on hand to wipe up any spills straight away, you shouldn’t
encounter any problems.
3. Keep liquids away as they may damage the finishing.
4. Avoid harsh cleaning chemicals such as alcohol or gasoline
solvents. Avoid using sponges or dirty cloths.
5. Cover furniture that isn’t being used to protect from dust and
ageing.
6. Re-tighten screws and attachments if they loosen.
7. Use protective coasters and mats for hot items on the furniture.
8. Keep furniture away from intense direct sunlight. Exposure can
cause cracks or discolouration.
9. Severe changes in temperature and humidity can accelerate ageing.
Keep furniture at least 60cm from heating or air conditioning.
10. Do not place furniture near open flames.
Rattan Cleaning and Maintenance
1. Clean rattan surfaces regularly. A monthly or even weekly cleaning
helps prevent dust from building up in crevices.
2. Use a vacuum with the brush attachment to remove loose dust and
debris from the crevices and cracks.
3. Use a toothbrush, cocktail stick or any other fine tool to remove
stubborn soil or debris.
4. Humidity may cause rattan webbing to go loose and bulge slightly. It
will eventually dry tight. Should the rattan webbing stay loose and look
stretched, wet the webbing with a damp cloth and dry out the piece in
a well-ventilated area. It helps restore the tightness.
5. If mildew or mould forms, mix bleach with water and use a scrub
brush to clean the affected area. Try not to saturate the rattan. Wipe
down the area with a fresh damp cloth to remove any bleach residue.
Allow the furniture to air dry.
6. Leaving the rattan webbing in its natural state allows the material to
breathe and gives maximum longevity.
7. Applying some linseed oil helps nourish rattan.
8. Occasionally inspect the rattan surface to identify any splinters or
broken webbing. Remove the splinters immediately to avoid any
injuries. If the breakage is significant, seek further advice by contacting
us directly.