Home Styles Concrete Chie 88 5134 30 Assembly Instructions

88 5134 30
Concrete Chie
Dining Table
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
A.
Table Top
1 Pc.
C.
Stretcher
1 Pc.
B.
Leg
4 Pcs.
D.
Stretcher
1 Pc.
Hardware List
Hex Wrench
1 Pc.
Small Hex Wrench
1 Pc.
Head Cap Bolt
8 Pcs. (+1 extra)
Spring Washer
8 Pcs. (+1 extra)
Wood Screw
5 Pcs. (+1 extra)
Flat Washer
8 Pcs. (+1 extra)
Tools required for assembly : Phillips screwdriver
Tools recommended for assembly : Level
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Assembly Instructions 2 /2
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the screws until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
STEP 1
Place Table Top (A) upside down on a
soft cloth.
Attach Legs (B) to Table Top (A) with
Head Cap Bolts, Spring Washers
and Flat Washers.
Tighten Head Cap Bolts only half way.
(see Figure 1)
B
B
B
B
Flat Washer
Spring Washer
Head Cap Bolt
B
A
STEP 2
Wood Screw
Figure 1
B
D
Attach Stretchers (C) and (D)
to unit with Wood Screws. (see Figure 2)
Tighten all Head Cap Bolts.
B
C
Figure 2
Figure 3
STEP 3
Turn the table over its’
upright position.
To the level the table,
adjust the adjustable levelers
on the bottom of the legs.
(see Figure 3)