TENAMIC GC Series Instruction Manual

GUN SAFE BOX
GC-SERIES
Instruction Manual
The professional of family safety.
Thank you for choosing our products!
You’ve taken an important step in organizing and
protecting your most valued possessions.
Every series of our safes is professionally made and
designed to provide safety.
Please take time to read and familiarize yourself with the
proper operating procedures of your new safe presented
on the following pages.
Again, thank you for choosing our products!
WARNINGS
To prevent damage to your TENAMIC unit or injury to yourself or to others, read the following safety
precautions before using this unit.
● DO NOT expose to extreme heat or cold. Machinery may be affected.
● Always check to make sure door has latched when closing.
DISCLAIMERS
● Neither seller or manufacturer shall be liable for unauthorized access, any injury, loss or damage to personal
property direct or consequential, arising out of the use of, or the inability to use the TENAMIC Safe.
● The user shall determine the suitability of the TENAMIC Safe before the intended use and user assumes all
risk and liability whatsoever in connection therewith, TENAMIC Safe are not intended to protect against
environmental hazards including fire and water.
● Be sure and follow all local and state firearm laws.
CAUTION: PLEASE KEEP PRODUCT OUT OF CHILDREN.
E-mail: [email protected]
01
SETTING
● Turn the three wheel combination to factory code: 0-0-0 and turn the knob clockwise to the open position.
● Leave the knob turned.
● Open the lid. On the underside of the lid, move the lever from the “A” position to the “B” position.
● Set your personal combination by turning each of the three wheels to your desired number.
● Return the lever on the underside of the lid from “B” to “A”.
● Your new combination is set.
CAUTION:
● Make sure the center of the wheel is aligned.
● If you have any questions, you can also refer to the pictures on the product webpage.
E-mail: [email protected]
02
MOUNTING METHOD
TIP: Make sure you have enough clearance for the lid to open properly before mounting the safe and fix the
safe in the place which is not easy to move.
● Drill holes for expansion bolts (or clamping screws) in the right place.
● Turn the expansion bolts counterclockwise to separate.
● Use the expansion bolts (or clamping screws) to secure the case to the wall.
● Make sure the case is mounted in place as required and then tighten all screws.
CAUTION:
● Use the expansion bolt when there is a concrete wall surface. Use the clamping screw when there is a
wooden wall surface.
● Do not let the safe door face the floor when you mounting the safe with the vertical direction to avoid your
property from damage.
E-mail: [email protected]
03
CABLE
● Open your safe and keep it in the open position.
● Loop the small end of the cable around the fixed object and then through the large end of the cable.
● Place the small end of the cable into the notch of the open safe.
● Make sure the metal stud on the cable is inside the safe.
● Close and lock the safe.
NOTE:
● Whether there is a cable depends on the model.
CUSTOMER SUPPORT
Dear customer,
Thank you for trusting us.
If you have any questions about the product, please feel free to contact our customer service mailbox:
[email protected]. We will try our best to solve every after-sales problem for you.
If you are satisfied with our products, please don’t forget to share the details with your friends and other
customers, and tell us your feelings.
We sincerely thank you for your support and understanding.
Best wishes!
E-mail: [email protected]
04
WARRANTY (Terms and Conditions)
TENAMIC is committed to building high quality products and will make every effort to ensure our products are
free from any defects. We guarantee your safe will be free od defects in materials or workmanship for a period
of one year from the date of purchase. This warranty does not cover abuse, misuse, use in any manner for which
is not designed, neglect, modification, damage in advertently caused by the owner; accidents, and/or tampering.
If you safe is determined to be defective and we are responsible for the cause we will have it repaired at our
expense, or we will send a new replacement at no cost to you. You will be required to return your existing unit
as well as all included accessories to TENAMIC prior to replacement of the defective unit along with your order
of purchase.
If it is determined your safe needs to be returned our returned our customer support team will provide you with
a return detail.
Please have the following information available when contacting us:
● Purchaser’s name and mailing address, email address, and phone number
● Online order number
● Detailed description of problem
NEITHER SELLER NOR MANUFACTURER SHALL BE LIABLE FOR ANY INJURY, LOSS OR DAMAGE, DIRECT OR
CONSEQUENTIAL, ARISING OUT OF THE USE OF , OR THE INABILITY TO USE THE TENAMIC SAFE.
E-mail: [email protected]
05
Customer Support Hours:
Monday – Friday 9:00AM - 6:00PM (PST)
Saturday – Sunday 9:00AM – 8:00PM(PST)
Excluding Holidays Hours subject to change
Customer Service Contact:
[email protected]