Afrison 6 Series Installation Instructions
The Afrison 6 series is a versatile and powerful infra-red LED floodlight, available in 12w and 24w versions. Designed with a wide range of features, it is suitable for various applications such as security, surveillance, and illumination. This floodlight offers a choice of lens types, including narrow, medium, and wide options, providing optimal coverage for your specific needs. With its robust construction, high IP65 rating for weather resistance, and user-friendly installation process, the Afrison 6 series is a reliable and durable solution for your lighting needs.
advertisement
▼
Scroll to page 2
Cederberg Infra-Red LED Flood light Part number breakdown Part number: AA BB CC D EEE F G AA FL Flood light BBB Wattage CC S6 - Series 6 12w, 24w D Lens EEE Voltage S - 155° x 85° W - 60° M - 30° 12v 220v FF IR Infra-red Technical information Operating voltage IP Rating Front cover Operating temperature (°C) Standards Mounting hight (m) 100 265VAC 50/60hz 12-24VDC IP 65 Polycarbonate Diffused front coverUltra High Impact -20 to 40 SANS 60598 2-6 Eye safety information IR Variants (850nm and 940nm) CAUTION: IR emitted from this product. IEC 62471 Risk Group 2 Classification. Do not stare at the lamp. Avoid exposure or use appropriate shielding / eye protection. Operating position Universal Series 6 24w A (mm) 120 B (mm) 175 C (mm) 100 Max projected area (m°) Weight (kg) 0.033 1.6 U- Bracket mounting holes *AFRISON TERMS & CONDITIONS DUE TO ONGOING R&D AFRISON RESERVES THE CATALOGUE AT ITS OWN DISCRETION AND AT ANY TIME WITHOUT PRIOR NOTICE 1, 2 , 3 OR 5 YEAR WARRANTY (REPLACE OR REPAIR) - PLEASE SEE FULL TERMS AND CONDITIONS AT WWW.AFRISON.CO.ZA - PICTURES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY, ACTUAL PRODUCT MAY VARY DUE TO TECHNICAL DEVELOPMENT. E & OE. © 2022 AFRISON LED. ALL RIGHTS RESERVED. Installation instruction A qualified electrician must conduct the installation. Tools required: - Flat head screwdriver (to open connection box. 13 hex spanner (to adjust u-bracket) tools not included 1. To install the Cederberg Infra-Red Flood Lights, special attention needs to be given to the mounting holes on the Ubracket for alignment. a. Use correct size (calculated on hight and weight) bolts / Rawle bolts to correspond with your mounting surface. b. Once U-bracket adjusted to required angle fasten U-bracket bolts. (M8 25N.m) 2. 3. 220VAC VERSION: To connect to the mains 220VAC confirm main power is switched off. The Cederberg Infra-Red Flood Lights require mains voltage of between 100 to 265VAC 50/60 Hz. Connect the mains cable to the power supply via the 20mm Cable Gland. Always use round cable and not flex or flat cables for sealing purposes with the Cable Gland. Open the power supply unit by unscrewing the four screws that keep the lid closed. Connect the corresponding wires, Brown (L), Blue (N), and Yellow/Green (E) in the connector on the power supply. Always read the label on the power supply to make sure the voltage is correct. When powering the light, the light should come on immediately. 6. 12 24VDC VERSION: To connect to the mains 12-24VDC confirm power is switched off. The Cederberg Infra-Red Flood Lights require mains voltage of between 12 to 24VDC 50/60. Connect the power cable to the connector block via the 20mm Cable Gland. Always use round cable and not flex or flat cables for sealing purposes with the Cable Gland. Open the connection unit by unscrewing the four screws that keep the lid closed. Connect the corresponding wires, Red (DC +),Black (DC-). Always read the label on the connection unit to make sure the voltage is correct. When powering the light, the light should come on immediately. Connection diagram: 7. Picture of Protection Unit: 4. 5. Cederberg Infra-Red Flood Light Protection Unit *AFRISON TERMS & CONDITIONS DUE TO ONGOING R&D AFRISON RESERVES THE CATALOGUE AT ITS OWN DISCRETION AND AT ANY TIME WITHOUT PRIOR NOTICE 1, 2 , 3 OR 5 YEAR WARRANTY (REPLACE OR REPAIR) - PLEASE SEE FULL TERMS AND CONDITIONS AT WWW.AFRISON.CO.ZA - PICTURES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY, ACTUAL PRODUCT MAY VARY DUE TO TECHNICAL DEVELOPMENT. E & OE. © 2022 AFRISON LED. ALL RIGHTS RESERVED.
advertisement
Key Features
- Infra-Red LED
- 12w/24w Versions
- Lens Options
- IP65 Rated
- Universal Mounting
- Easy Installation
- 12-24VDC/100-265VAC
- Polycarbonate Cover
Frequently Answers and Questions
What lens options are available for the Afrison 6 series?
The Afrison 6 series offers three lens options: S for 155° x 85° wide coverage, W for 60° medium coverage, and M for 30° narrow coverage.
What is the operating voltage for the Afrison 6 series?
The 6 series can operate on either 12-24VDC or 100-265VAC.
What is the IP rating of the Afrison 6 series?
The Afrison 6 series has an IP65 rating, making it dust-proof and resistant to water jets.
Related manuals
Download
PDF
advertisement
