Master Grade | Premium | Bonethane Premium making you the DIY Master !

08 8381 8880
www.ispsinnovations.com.au
Splashbacks & Wall Panels in High Gloss, Satin Finish, any colour & Filler EFX™
Bonethane®, available in any colour & EFX. A Polymer based product & coating formula, crafted & customised modelling
strength, flexibility & colour spectrums that are simply endless. Bonethane® Premium has a continuous service
temperature of 110°C, Bonethane® GN Acrylic grade has a continuous service temperature of 85°C. Light flexible,
bringing style to any home or commercial environment. See our new filler EFX™ endless designs mixing
colour combinations, used as either a mosaic filler design creating length extension, bordering or as a splashback
or feature wall. Custom designed with your specific mix of colour blend, coordinating colours in high gloss or
satin finish. Our Premium Metallic Satin finish range is durable & great for table tops, perfect for kitchen tables & bench
spaces. Be in control, choose your colour, choose BonethanePremium or BonethaneGN Acrylic all custom made!
Bonethane ® available in two grades Premium 120°C High Heat Polymer suitable for induction cook tops(maintain distance
specifications, showers cubicles, wet areas, feature walls, hospitals, bars, does not split or crack when following cutting instructions.
GN Acrylic grade 100°C great for feature walls & shower cubicles, not suitable for any cook-top.
FEATURE & BENIFITS
► Bonethane® grades are DIY & cost effective. Premium
Sheets do not split or crack when cutting.
► Bonethane® grades can be cut down with ease on site
including power points & innovative angles.
► Bonethane® grades available in any colour, metallic
& Abstract EFX™. Can be colour matched up to
12% variation to your selected colour choice.
► Bonethane® is suitable for indoors, outdoors & most
wet areas. Applied virtually anywhere
you can imagine. Great for shower cubicles!
► Bonethane® grades installation is easy, fast with a
visual reward in a matter of hours.
►Bonethane®GN Acrylic grade requires more
attention when cutting & should not be confused with
Bonethane Premium both substrates cut differently &
handle heat differently.
► Easy to clean, warm soapy water & sponge, rinse residue.
Bonethane® grades air dry & shine, no polishing necessary saving
you cleaning time. Harsh cleaning agents, gone!
► Bonethane® grades can be placed over existing surfaces.
► Bonethane® grades come with Grip Tech backing, no need
to coat walls a neutral colour or sanding of the backs of sheets.
► Bonethane ® Premium is DIY friendly will not split or crack when
cutting with standard fabricating equipment. Strictly follow our step
by step instructions.
► Bonethane Premium has better heat distribution than Acrylic
grades of material. Burn test on You Tube Bonethane Premium Vs
Acrylic & out Candle burn test.
►Scratches easily buff out, see us demonstrate on Youtube
►Bonethane grades are a custom made to order DIY product. Order
what you need in any colour, accessories also available. We can
create your corporate colour & logos into our sheeting.
►On Bonethane Premium ISPS can double your Warranty, ask how.
View Bonethane Premium VS Acrylic on You tube
Ice Grey & Black Bonethane
Mushroom
Ph: 08 8381 8880 www.ispsinnovations.com.au
Bonethane Premium
Violette
Bonethane Premium in this image
Get Creative
Midnight Metalic Star
Bonethane Premium
making you the DIY Master!
www.ispsinnovations.com.au
08 8381 8880
Step by Step Installation Guide
Bonethane Premium suitable for induction cook tops
Step 8
Step 1
Step 5
Lay Bonethane® flat for first 3 hours prior to Installation.
Ensure wall is level flush free from holes neutral in
colour forming even flat surface for Bonethane™
placement . Use only led pencil for marking cut outs or
cuts on back of sheet, coated side.
Power hole cut outs vary on the power switch.
The cut out should not be greater than the
covering plate. An electrician will also need to
connect electricity if you have extra out lets.
Switch off Electricity for your safety!!! Add clear
silicone to the coated side of Bonethane® ( this is
the side that does not have protective film), first
vertically from the top then horizontally creating a
grid of squares around 10 to 15 cm width and
length ways.
Step 9
Before
After
Step 2
Step 6
Measure the outside perimeter of the wall. Length
and height, allowing 1 to 2ml gap all around. For
example if you: measure 500 height by 500 length
your cut out area should be 498 x 498 (2ml) It is
important that the 1 to 2ml gap is followed, allowing
Bonethane™ to expand and contract. Also measure
section for cut out.
Cut splash back once perimeter and cut out(s)
measurements are final, making sure,
Bonethane™ is face down, (that is the masked
side is touching the flat level non slip surface and
the coated side is facing you.
Finally use silicone clear non acidic to seal
2ml exposed joins & seal. Clear is always the
safest choice, white is effective if you have a
steady hand or you may seek the services of
a professional. Follow instructions for
silicone application, the product you choose
should display instructions, make sure it is a
water proof silicone used for kitchen and
bathroom areas. When Bonethane® is
upright & in a secure position peel off
masking.
ISPS Innovations can provide a fire rated
insert, custom made for behind your gas cook
top. Made from Vetro Poly Star fire Toughened
Glass in either metallic Silver or colour toned to
blend with Bonethane® Premium or
Bonethane®GN. Please enquire about our glass
offer call 08 8381 8880.
Turn off Electricity from main switch!!!
Step 3:
On perimeter of Bonethane® allow a 1 to 2ml gap all
around. The tile wedge will be placed around the
perimeter of the mm gap once clear silicone is
applied to back & placed upright, against wall. The
tile wedge will hold Bonethane™ in place (more
about this in STEP 8)
Tile wedge
Step 4
It is important to place Bonethane® face down
(masked side down) in preparation for cutting.
The area for the preparation of cutting must be
free of obstacles, on a solid flat, non slip surface,
in a well ventilated, lit area. Ensure the
Bonethane® sheet is firmly secure in preparation
for cutting.
www.ispsinnovations.com.au
Step 7
After clear silicone grid process, mount
Bonethane® onto wall, inserting cables
through power hole cut outs, securing tile
wedges around the 1 & 2ml allocated
perimeter, leave tile wedges for
approximately 2 hours. Clean surrounding
areas free from saw dust particles. Once
secure, peel off protective film from
Bonethane® face. Please refer to “Care
Do’s” for keeping Bonethane® bright &
beautiful
TIPS: Incorporate tiles as a design
DO NOT BUTT UP AGAINST COOK TOPS
ISPS also customise trim in 6mm Anodised or
Colour coded to finish your joins & Filler EFX.
Trim & Filler EFX™ Combinations
What you need
Do not butt up against cook top
Some of our standard Colour Range
Orange 5101984
Lime 5101983
Mushroom 5101985
Not included in Pack Jig saw fine sharp teeth to cut Premium &
fine sharp plastic teeth blade for GN Acrylic grade. Drilling requires plastic drill bit attachment.
The following items also required, tile wedges, silicone non acidic (Parfix All Purpose clear
Silicone), protective goggles, dust mask, saws, spirit level. Call ISPS if in doubt 7 days
a week.
Satin Blue 5101986
Grape 5102174
Satin Blue
Ice Grey 51019878
Apple 5101979
A/White 5101982
Bone 5101981
Black 5102174
BonethanePremium available in 16 standard Colours. The colours on this brochure vary
from the actual colour. View display board in store for accurate colour. Call ISPS if you are unsure of colour
range.
A/White
Induction Cook-top
Apple Bonethane® Premium
Retro Dusk Bonethane Premium & Silver VetroPoly™ Toughened Glass
www.ispsinnovations.com.au
08 83818880
Grape
Ice Grey
Chocolate
Kaboodle Green
www.ispsinnovations.com.au
08 8381 8880
Create a Colour!
Flinders Green
Linseed
www.ispsinnovations.com.au
08 83818880
Hog Bristol Full Strength
Wasabinaise
Bonethane® Premium in Wendy’s
www.ispsinnovations.com.au
08 83818880
Splashbacks & Wall Panels in High Gloss, Satin Finish, any colour & EFX
Bonethane®Premium Doors & Splashbacks
SPECIAL ORDER
For custom colour selection simply follow these steps:
1. Choose any colour sample either from our standard colour range, paint colour chips or another colour you may have ie
(fabric), anything really.
2. Bring your colour chip into store for placing your order. You will need to supply the colour chip for colour matching.
3. Place your order at the Special Orders desk.
4. Your custom coloured Bonethane will be supplied in 10 to 15 work days.
Colour Toning Existing High Gloss Bonethane Grades
If you are extending, & require more Bonethane, ISPS Innovations can colour tone additional Bonethane for your project.
What we require is a piece of Bonethane at least A4 to A3 size to be posted back to us, so we can process colour.
We can have up to a 12% variation in colour toning gloss colours . If the gloss sample is to small we are limited in our colour
process which can blow variation out to 25% & can effect pigment ratio. When colour matching satin colours we are dealing with
one range of colour, when colour matching high gloss we need to factor in light contrast along with gloss depth. A small sample in
gloss limits full colour range & variation up to 25% can occur. So the bigger the gloss sample the better the match.
TIPS & COLOURS: 1 to 6
1) When ordering multiple colours, it is best to order of same colour batch. Ordering off different batches can result in variations.
2) A/White on white can appear grey, so choose your white carefully, this may be a special order.
3) Bonethane Grades come with Grip tech backing, no need to coat walls a neutral colour or sanding of the backs of sheets.
4) Adhesive, clear neutral cure silicone apply in grid format 10cm apart.
5) Use standard jig saw with fine sharp teeth for cutting.
6) Use plastic cutting blade for GN grade acrylic grade & plan cuts. Please call ISPS for tips & helpful information
7) Bonethane Premium is DIY friendly & will not split or crack when cutting & drilling with a jigsaw with fine sharp teeth.
8)When ordering from different colour batch through ISPS, please ensure an A3 or A4 gloss sample is provided.
Please refer to our colour section on our website for more information on
colour process www.ispsinnovations.com.au
All items are available
Diagram cut out in two tone
Note M2 rate applies to straight cut only. Additional charges apply for angles, elevated & power hole cut outs.
5mm
Bonethane® Grade
Size
Item Number
B/Premium™
B/Premium™
B/Premium™
B/Premium™
B/Premium™
B/Premium™
B/Premium™
B/Premium™
B/Premium™
B/Premium™
B/Premium™
GN Acrylic™
GN Acrylic™
GN Acrylic™
GN Acrylic™
GN Acrylic™
GN Acrylic™
400 X 1200MM
400 x2400MM
1200 x 760MM
2440 x 600MM
2440 x 760MM PACK
2440 x1220MM
3000 x 760MM
3000 x 900MM
3000 x 1100MM
OVER 1.85M2
UNDER 1.85M2
2440 X 600MM
3000 X 600MM
2440 X 1220MM
2 X 1M X2M SHEETS
TBA
TBA
5102178
TBA
5102174
5102179
TBA
TBA
TBA
TBA
TBA
TBA
TBA
TBA
5102398
TBA
TBA
983003
TINY
MINI
SML
MED
STD (PACK INCLUSIONS)
LGE
XL
XXL
XXXL
CUT TO SIZE M2 RATE
CUT TO SIZE M2 RATE
SMLGN
STD GN
LGEGN
Shower Pack
CUT TO SIZE M2 RATE GN
CUT TO SIZE M2 RATE GN
Colour Match Flat (solid colour not
metallic)
Abstract EFX™
Metallic
Printed Logo & colour backing
Designer cut out & two tone Colour
Anodised Trim
Colour coded Trim
Cut to size 1 straight cut
Cut to shape
Power hole cut out
TRIM
TRIM
OPTION
OPTION
OPTION
2400MM 6MMSOLID
2400MM 6MM SOLID
5102346
5102345
TBA
TBA
TBA
TBA
TBA
TBA
TBA
Bonethane ® Premium & GN™ Sheets come with GripTech™ backing. The backing is a different colour to face of the sheet,
if you require similar colour backing please advise the team member & ask that they place on your purchase order.
ISPS Innovations always have the right customised accessory for you to finish your project.
Universal Joining Strip for vertical or Horizontal Joins & Designer Filler EFX™ by ISPS Innovations
Filler EFX
External corner created by joiner
Bonethane
Bonethane
Joiner
Filler
Joining strip Vertical
Filler EFX, custom designed. 65mm x 760mm. Longer
lengths available. Additional charges apply.
Call 08 8381 8880 for more info.
NEW
Bonethane®, Filler EFX™
A design based on the colour furnishings where Bonethane®
is applied. Allowing the design to be placed horizontal
or vertical within the sheet, housed with our anodised
joiners. A stone or marble filler Efx™ creating the finishing
touch based on your colour scheme. Bonethane®filler Efx™
fillers can also be used in conjunction with other
products. Combination colours designed to your decor.
www.ispsinnovations.com.au
Sheet
Joiner
6mm solid joining strip can be used as vertical or horizontal joiner,
to join pieces or wrap around window or create external right
angle.
08 83818880
Customised VetroPoly™ Toughened Glass for behind your gas burner
Let ISPS assist you with your cook top needs. If you have a gas burner then VetroPoly™ Toughened Glass is just for you. ISPS
can customise glass dimensions to reside specifically behind your cook top in metallic silver or colour toned to Bonethane
sheeting.
STD Bonethane Premium PACK offer & Upgrades............
Through Bunnings on item number 5102174 enclosed in this pack are the following items




1 Sheet Bonethane® Premium 2440 x 760 x 5mm
1 Flat colour match on any flat colour (additional charge on metallic)
3 straight cuts ( all the way through the sheet, angled cuts additional charge)
1 fire rated insert in Silver in either 600 x 300 or 900 x 300 ( additional charge on colour toning or customising
insert)
 6 Anodised Trim @ 760mm
 1 Custom Filler EFX™ 65mm x 760mm
If you purchase two of these fine line numbers (5102174) to complete your project, ISPS will upgrade your insert for
behind your cook-top from either a 600 x 600mm or 900 x 600mm in metallic silver. It is important to nominate size
of insert as ISPS will place what ever insert is available at the time if this is not nominated. Additional charges apply
to change & ship once order is received.
With the Purchase of two sheets (2 x item number 5102174 please see below you get)




2 Sheets Bonethane Premium 2440 x 760 x 5mm
1 Flat colour match on any flat colour on Bonethane® Premium (additional charge on metallic)
6 straight cuts ( all the way through the sheet)
1 fire rated insert in Silver in either 600 x 600 or 900 x 600 ( additional charge on colour toning or customising insert
to Bonethane Sheeting)
 12 Anodised Trim @ 760mm
 2 Custom Filler EFX™ 65mm x 760mm
Item number 5102179 Bonethane Premium 2440 x 1220 sheet is available in 16 House colours. There are no
inclusions, however colour matching, fire rated inserts, trim, filler EFX or cut to size & shape can be purchased at an
additional charge.
Bonethane Premium
making you the DIY
Master!™
Splashback – Blank, straight cut
NAME: ______________
CONTACT PHONE:_______________
EMAIL ADDRESS ______________ Purchase order number _________________________
Diagram
Diagram:
08 83818880
08 83818880
Splashback - Central Cut Out and PowerPoints
NAME: ______________ CONTACT PHONE:_______________
EMAIL ADDRESS ______________ Purchase order number _________________________
Diagram
Diagram
08 83818880
Splashback - Central Rangehood - 2 PowerPoints NAME: ______________ CONTACT PHONE:_______________
EMAIL ADDRESS ______________ Purchase order number _________________________
Diagram
Diagram
08 83818880
Splashback - Central Rangehood - Left Hand PowerPoin NAME: ______________ CONTACT PHONE _________________
EMAIL ADDRESS ______________ Purchase order number _________________________
Diagram
Diagram
08 83818880
Splashback - Central Rangehood - Right Hand PowerPoint NAME: ______________CONTACT PHONE_______________
PHONE:_______________
Diagram
Diagram
EMAIL ADDRESS____________________________________________
08 83818880
Splashback - Central Rangehood
PHONE:_______________
Diagram
Diagram
NAME: __________________ CONTACT PHONE_________________
EMAIL ADDRESS____________________________________________
08 8381 8880
Let ISPS Innovations assist you with all your custom interior &
exterior needs. No minimum order quantity.
Stay tuned, more updates to follow.
SPECIALISING IN










Benchtops in ColourTech™
Partitions in ColourTech™
Polyurethane Doors in Colour Tech™
BonethanePremium® Splashbacks & Wall Panels
BonethaneGN™ Acrylic grade Splashbacks & Wall Panels
Bonethane10 Flooring, Benchtops, Wall Panels
IPA Acrylic™ Splashbacks & Wall Panels
Vetropoly™ Toughened StarFire Glass
Alumethane™ composite panels
KUTTM8™
NEW YOU TUBE CLIP ON INSTALL OF BONETHANE PREMIUM LAUNCHED. ALSO
SCRATCH TEST ON OUR PREMIUM SHEET. SEE US POLISH PREMIUM GRADE IN
REAL TIME BEFORE YOUR EYES! http://www.youtube.com/watch?v=SwpP8VSA3Yg
www.ispsinnovations.com.au
BURN TEST Bonethane Premium Vs Acrylic & Candle Test, Bonethane Premium goes head to head with Acrylic
substrates http://www.youtube.com/watch?v=5LbYZRtsvtY (Bonethane Premium Vs Acrylic)
http://www.youtube.com/watch?v=icl9VoH0_Vs
(Line up candle test, Bonethane premium is 5th in the line up
Grape
(red sample) counting from left to right)
Ice Grey
It is regulation that when installing any products that Australian standards are followed in conjunction with the product you choose. Regulations are for your safety
Download PDF

advertising