SONARAY SR-2050 Installation Manual
The SONARAY SR-2050 is a powerful 50W all-in-one solar light designed for outdoor illumination. Featuring an aluminum housing and IP66 weatherproof rating, it can withstand harsh conditions. The SR-2050 utilizes a solar panel to charge the internal battery, providing energy-efficient operation. Its motion sensor activates full brightness when movement is detected, while dimming to conserve energy when idle.
advertisement
Assistant Bot
Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.
▼
Scroll to page 2
of
3
PROJECT ® DATE TYPE NOTES www.sonarayled.com REV: 21 0101 0000 All-in-One Solar Light Installation Guide TECHNICAL PARAMETERS INSTALLATION DIAGRAM PRODUCT PHOTO MODEL NUMBER POWER CONSUMPTION 1. Press the on/off button near the mount of the solar light. SR-2050 SR-2070 50W 70W OPERATING VOLTAGE 12-24V DC HOUSING MATERIAL Aluminum OPERATING TEMPERATURE -30°C ~ +50°C / -22°F ~ +122°F IP RATING 66 EPA RATING 1.70 ft² 2.92 ft² BUG RATING B3-U1-G0 B3-U1-G1 WEIGHT DIMENSIONS 16.97 16.97 23.62 x 8.66 x 4.01 32.10 x 9.74 x 4.98 ATTENTION This manual instructs the important information of installation and operation. Be sure to strictly follow the instructions before use. To ensure correct installation and operation of the product, carefully read and understand all contents of this guide. Any mechanical or electrical modifications to the product will void warranty and may cause dangerous hazards. To avoid potential issues caused by high temperature, be sure no objects are on the lens while the product is switched on. INSTALLATION PREPERATION 1. Take out the luminaire from the box and place it on a level platform for easy installation. 2. For proper operation, a qualified electrician should perform the installation. 3. Ensure the normal ambient temperature of the installation location is between -40°C ~ +45°C. 4. Ensure the voltage of the luminaire is capatable with the onsite voltage before installation. 5. Any luminaire with damaged power cord should not be installed. Note: The power must be cut off before installation. ©2021 | SONARAY LED LIGHTING HEADQUARTERS | 34 LAKEVIEW COURT VERONA, VA 24482 USA | OFFICE 844.202.5606 | FAX 540.242.7221 PROJECT ® DATE TYPE NOTES www.sonarayled.com REV: 21 0101 0000 All-in-One Solar Light Installation Guide INSTALLATION DIAGRAM 2. Loosen the two hexagonal screws on the bracket to adjust the angle of the unit. Once in the desired poistion, tighten the screws with the wrench. SIDE MOUNTED STYLE ©2021 | SONARAY LED LIGHTING HEADQUARTERS | 34 LAKEVIEW COURT VERONA, VA 24482 USA | OFFICE 844.202.5606 | FAX 540.242.7221 PROJECT ® DATE TYPE NOTES www.sonarayled.com REV: 21 0101 0000 Shoebox Area Light Installation Guide TOP MOUNTED STYLE 3. Solar Light mounting bracket slips over any 2-3/8” tenon or pole arm. SOLAR FUNCTION - Solar Panel charges in the daytime and stores power in the internal battery. - When no motion is detected from 30 feet away, the unit will dim down to prolong the usage throughout the night. - When motion is detected, the light will cut back on to 100%. ©2021 | SONARAY LED LIGHTING HEADQUARTERS | 34 LAKEVIEW COURT VERONA, VA 24482 USA | OFFICE 844.202.5606 | FAX 540.242.7221
advertisement
Key Features
- 50W Power Consumption
- Solar Powered
- Motion Sensor
- Aluminum Housing
- IP66 Weatherproof
- Dimming Mode
Frequently Answers and Questions
What is the operating voltage of the SR-2050?
The operating voltage is 12-24V DC.
What is the maximum operating temperature for the SR-2050?
The maximum operating temperature is +50°C / +122°F.
What is the EPA rating of the SR-2050?
The EPA rating is 1.70 ft².
How does the motion sensor work on the SR-2050?
The motion sensor detects movement from up to 30 feet away and activates full brightness. When no motion is detected, the light dims to conserve energy.