Xpand DLP-Link X105-DLP-X1 User Manual

XPANDVISION
(DLP®-Link™) 3D Glasses
Model No. X105-DLP-X1
User Manual
Glasses Overview
(1) Button (ON, OFF, Pairing) – located on the inner side of the right earpiece.
(2) LED – located on the outer side of the right earpiece, near the earpiece hinge.
What’s Included
»»One (1) pair of XPANDVISION (DLP®-Link™) 3D Glasses
»»USB charging cable
»»Pouch
»»User’s manual
Compatibility
A 3D Enabled DLP®-Link™ TV or DLP®-Link™ 3D projector. 3D devices with IR or RF
synchronization are NOT supported.
Warranty
1-year limited product repair / replacement warranty. For detailed warranty statement visit
www.xpandvision.com/warranty
Functionality
Turning On/Off Your Glasses
»»Step 1: ON: Press button (1) once
»»Step 2: LED light (2) will ramp from OFF to bright
»»Step 3: OFF: Press button (1) once
»»Step 4: LED light (2) will ramp from bright to OFF
The glasses also automatically turn OFF if no valid 3D synchronization signal is detected for 5
minutes.
NOTE: Glasses won’t operate during charging (i.e., charging cable connected).
© XPANDVISION, All Rights Reserved.
www.xpandvision.com
Set Your Glasses to Operate in 3D Mode
Set your 3D device to 3D DLP-Link™ mode and turn on the glasses. When the glasses are in
range of your 3D device, they will automatically start to operate in 3D mode.
Battery Low Indication
If the glasses are ON and the LED is blinking every couple of seconds this indicates low battery
level. Glasses will continue to operate normally until the battery is completely discharged.
Battery Charging
»»Step 1: Connect USB charging cable to USB power supply (e.g., computer or wall charger
with USB compliant output).
»»Step 2: Connect charging cable to glasses.
»»Step 3: LED is ON (charging).
»»Step 4: LED turns OFF (fully charged).
»»Charging usually takes 3 hours, when battery is completely discharged.
»»Please, fully charge the glasses prior to the first use.
»»Please note that the glasses can’t be used during charging.
Troubleshooting
The glasses don’t work: Make sure that the glasses are turned on. If problems persist try to turn
the ambient lights off or shade the windows if intensive sunlight is present. Make sure that your
3D device is set to 3D DLP-Link™ mode. Get closer to the screen. Range of the glasses strongly
depends on the used 3D device and/or projection screen.
Attention – Consult Accompanying Documentation
Important Safety Instructions
! Read these instructions.
! Keep these instructions.
! Heed all warnings.
! Follow all instructions.
! Do not use this apparatus near water.
! Clean only with dry cloth.
! Only use the attachments/accessories included
Battery
The 3D Glasses Battery is not user replaceable.
WARNING, Battery May Explode If Mistreated. Do Not Disassemble, Or Dispose of In Fire.
© XPANDVISION, All Rights Reserved.
www.xpandvision.com
Viewers need to refer to the recommendations described below
»»Stop watching moving images, if you have any symptoms of: headache, dizziness, nausea,
malaise and any uncomfortable feelings that might be caused by the images. It is advisable
to take a break for 5 to 15 minutes every hour, even if the symptoms are not experienced.
»»Make the viewing conditions comfortable by:
• Adjusting the illumination, sound and air conditioning.
• Adjusting the height of the chair and desk to suit your physique.
• Adjusting the brightness, focus or any other parameters of your display terminal or
operating devices.
»»Guardians are encouraged to protect their children’s health by controlling viewing conditions.
»»Avoid unnecessary fatigue caused by overwork or lack of sleep, before watching visual
products.
»»When watching stereoscopic images, do not incline your head relative to the horizontal
direction of the images.
»»Stop watching stereoscopic images if you notice double images. It is important that display
devices be adjusted appropriately.
»»The recommendations described in this list may apply to some visual products more than
others.
Regulatory Compliance Statements
Caution: Any changes or modifications to this equipment not explicitly approved by X6D Limited
shall void the user’s authority to operate it.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Hereby X6D Limited declares that the X105-DLP-X1 is in compliance with the essential
requirements and other relevant provisions of the EU Directive 2004/108/EC. The declaration of
conformity may be consulted at http://www.xpandvision.com/products/xpand-3d-glasses-lite/
declaration-of-conformity/
© XPANDVISION, All Rights Reserved.
www.xpandvision.com
Technical Specifications
3D Technology: Active Shutter Glasses
Lens Type: LCD
Sync Method: DLP®-Link™
Shuttering Frequency: 96 – 144 Hz
Temperature: 5 – 45˚C
Battery Life: 75 hours
Battery Type: Rechargeable Lithium-ion Polymer cell
Frame Specifications
Lens Size: 2,2” diagonal (58 mm)
Weight: 1.3 oz (37 g)
Dimensions (W x H x D): 6.7” x 1.6” x 6.5” (170 mm x 40 mm x 165 mm)
Frame Color: Black Earpieces, Transparent Front
Technical Support
For direct support with XPANDVISION Consumer products please contact us at:
[email protected]
X105-DLP-X1_M_eng_01
09-18
© XPANDVISION, All Rights Reserved.
www.xpandvision.com