Boult Audio AIRBASS PROBUDS User Manual

AIRBASS PROBUDS
USER MANUAL
Watch the VIDEO tutorial at
boultaudio.com/howto1
OR
Call us at +91 8595516267
& enter code 01 for a personalized
training session or queries
Please refer to the safety precautions mentioned on the last page
of this manual before operating this device.
Pairing for the rst time
Step 1: Make sure the product is fully charged.
Step 2: Open the case with earbuds inside and wait for 3-4
seconds. Both the earbuds will show red LED light for 3-4
seconds and they will pair with each other.
Once paired, red & blue LED light will start ashing on one
earbud. Now, they are ready to connect with your device.
Step 3: Turn on the bluetooth on your device & scan until you see
”Boult Audio Probass”
Step 4: Click on “Boult Audio Probass” and pair your device with
the earbuds. Once paired, red & blue ashing LED light will
switch off. Now, you can enjoy your music/calls.
Auto-pairing Mode (Re-pairing with your device)
Step 1: Turn on the bluetooth on your device.
Step 2: Open the case, earbuds will pair with each other in the next
3-4 seconds.
Step 3: Earbuds will connect to your same device automatically. If
not, connect to “Boult Audio Probass” in the bluetooth
settings on your device.
Product Introduction
Charging pins on earbud
Multi function button
LED indicators of earbud
Type-C charging port
LED indicator of charging case
Using as a Mono Headset
Step 1: Open the case with earbuds inside.
Step 2: Take one earbud to be used as a mono headset and close
the case.
Step 3: Earbud will start ashing red & blue LED light and will be
ready for the bluetooth device to connect.
If not, long press the multi function button to switch OFF
the earbud. Release and re-press the multi function button
to switch it ON. Earbud will start ashing red & blue LED
light and will be ready to pair with your device.
Step 4: To use both earbuds as mono headsets with different
devices, connect one earbud with your rst device and
connect the second earbud with your second device.
Please ensure that the rst connected earbud should be in
the case with the lid closed or at least 10-15 meters away
from the rst connected earbud. Or else, they will pair with
each other.
Charging the case
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Charging case has four LED lights on the front which
indicates available battery.
Each LED light re ects 25% available battery power.
To charge the case, plug in the type-C charging cable.
LED light will ash while charging and will be steady once
charging is complete.
To charge the earbuds, place both earbuds in the case and
close the lid.
Functions
1. Voice assistance
Click on the multi function button 3 times to activate the
Google assistant/Siri.
Google assistant/Siri will pop up on your phone screen.
2. Play/Pause music
Single click on the multi function button to play/pause
music.
3. Answer/Reject calls
Single click on the multi function button to answer or
reject a call.
4. Change music track
Double click on the multi function button on your left
earbud to change your current track to previous one.
Double click on the multi function button on your right
earbud to change your current track to next one.
5. Increase/Decrease volume
Long press on the multi function button on your right
earbud to increase the volume.
Long press on the multi function button on your left
earbud to decrease the volume.
6. Switch ON/OFF
Long press on the multi function button on your earbuds
to switch them On/Off when not using them.
Safety Precautions
Please make sure to follow the instructions provided in this
manual for your safety and to extend the life of the earbuds.
Ÿ
Ÿ
Ÿ
Ÿ
Please keep this device away from extreme heat, humidity
or corrosive environment.
Please don't over-charge the earbuds or the case, as it will
decrease the battery service life.
Please use only a good quality phone charger or USB
charging port to charge the case.
This product or the bluetooth function should not be used
during charging.