Atmel | ATAK2270 | Atmel LF-RFID Kit Comparison Chart

Atmel LF-RFID Kit Comparison Chart
1. Description
®
Atmel offers several types of development and evaluation kits.
The Atmel ATA2270-EK1 is an evaluation kit that supports a limited number of modes
in stand-alone mode. Support during the entire development phase is provided by the
PC interface and the application software. Both tools enable to control the tag configuration. This kit is AVR® ATmega128-based and provides all necessary source and
object codes. The CD-ROM also includes layout data in Gerber format. Code and layout data enable the quick and easy design of individual RFID readers. An API
(advanced programming interface) allows to control the kit by an user written software. Registered kit users will have access to an Atmel FTP server for firmware and
software upgrades.
Atmel LF-RFID
Kit Comparison
Chart
Application Note
The Atmel kits ATARFID-EK1 and ATARFID-EK2 are based on a commercial
reader/programmer supplied by the company GIS. The first version in the kit EK1
operates at 125kHz. It is best suited for access control, industrial and any kind of consumer applications. This EK2 kit operates at 134.2kHz according to the Animal ID
standards ISO 11784 and 11785 (FDX-A and FDX-B). Both kits allow not only to read
the tags but as well configure and program them. The readers have an USB connection and come with a PC based user interface. Samples tags complete this kit.
A different kit is the Atmel ATA5505-EK1. This is a USB-LF-RFID reader in memory
stick format based on Atmel’s LF-Reader-AVR circuit. The kit operates at 125kHz and
134.2kHz and is supporting all above already mentioned LF applications. Just
plugged in a PC the kit operates stand alone. After a successful read of a tag in
UNIQUE-format at 125kHz a red LED indicates this read. If the LED lights green, a
Animal ID tag according ISO 11784 and 11785 at 134.2kHz (FDX-B) was detected.
The kit can also be controlled using the GUI as used for the ATA2270-EK1. Some
tags compete the kit.
4980D–RFID–03/11
2. LF-RFID Kit Comparison Chart - Table
ATA2270-EK1
ATARFID-EK1
ATARFID-EK2
ATA5505-EK1
Evaluation kit
x
x
x
x
PC controlled
x
x
x
x
PC software
x
x
x
x
x
x
x
x
x
x
General
Serial interface (with USB converter option)
x
USB interface
(3)
LCD display
x
Keys and joystick
x
Buzzer
x
Kits Content
Main and interface board
x
Reader antenna coil
x
Complete reader
Power supply 120V to 240V
x
Serial cable
x
USB serial dongle
x
USB cable
(3)
x
x
CD-ROM software and documentation
x
x
x
x
Supported RFID IC Devices
T5551/TK5551
x
x
e5530/TK5530
x
x
x(1)
x(1)
T5552/TK5552
T5554
ATA5558
x
x
x(2)
x(2)
x
x
x(2)
x(2)
ATA5567 extended
x
x
ATA5570
x
x
ATA5577
x
x
x
x
x
x (M1)
x (M2)
x
T5557 compatible
T5557 extended
e5561/TK5561
ATA5567 compatible
ATA5575M1 and ATA5575M2
Notes:
1. To use the T5554 select tag type T5551 in the software.
2. This mode is only supported in the PC application software. All tag modes are programmable in this tool.
3. Planned
4. Several suppliers
2
Atmel LF-RFID Kit
4980D–RFID–03/11
Atmel LF-RFID Kit
2. LF-RFID Kit Comparison Chart - Table (Continued)
ATA2270-EK1
ATARFID-EK1
ATARFID-EK2
ATA5505-EK1
Tag, Transponder and IC Samples Contained in Kit
ATA5577 ISO card(4)
(4)
ATA5577 coin
ATA5577 fob(4)
ATA5577 ISO11784/85 tag
(4)
ATA5575M2 ISO11784/85 tag
x
x
x
x
x
x
x
(4)
(4)
ATA5575M1 ISO card
x
x
x
x
x
x
x
ATA5558 ISO card(4)
ATA5558 coin(4)
U2270-MFPG3Y
3
TK5551M-PP
3
ATA5577M1330-PAE
3
ATAB5570 board
1
TK5561A-PP
U3280M-NFPG3
Tag test coil
1
Supported Reader-RFID IC Devices
U2270B
x
ATA5505
x
Documentation on CD-ROM
User guide
x
Using ISO 11784/11785 application note
x
AVR source code
x
x
Gerber data
x
x
Notes:
1. To use the T5554 select tag type T5551 in the software.
2. This mode is only supported in the PC application software. All tag modes are programmable in this tool.
3. Planned
4. Several suppliers
3
4980D–RFID–03/11
3. Revision History
Please note that the following page numbers referred to in this section refer to the specific revision
mentioned, not to this document.
4
Revision No.
History
4980D-RFID-03/11
• Section 1 “Description” on page 1 changed
• Section 2 “LF-RFID Kit Comparison Chart - Table” on pages 2 to 3
changed
4980C-RFID-11/09
• Section 1 “Description” on page 1 changed
• Section 2 “LF-RFID Kit Comparison Chart - Table” on pages 2 to 3
changed
4980B-RFID-12/08
• Section 1 “Description” on page 1 changed
• Section 2 “LF-RFID Kit Comparison Chart - Table” on pages 2 to 3
changed
Atmel LF-RFID Kit
4980D–RFID–03/11
Atmel Corporation
2325 Orchard Parkway
San Jose, CA 95131
USA
Tel: (+1)(408) 441-0311
Fax: (+1)(408) 487-2600
Atmel Asia Limited
Unit 01-5 & 16, 19/F
BEA Tower, Millennium City 5
418 Kwun Tong Road
Kwun Tong, Kowloon
HONG KONG
Tel: (+852) 2245-6100
Fax: (+852) 2722-1369
Atmel Munich GmbH
Business Campus
Parkring 4
D-85748 Garching b. Munich
GERMANY
Tel: (+49) 89-31970-0
Fax: (+49) 89-3194621
Atmel Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
JAPAN
Tel: (+81) (3) 3523-3551
Fax: (+81) (3) 3523-7581
© 2011 Atmel Corporation. All rights reserved. / Rev.: 4980D–RFID–03/11
Atmel®, Atmel logo and combinations thereof, AVR® and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other
terms and product names may be trademarks of others.
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS
OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY
WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR
INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION)
ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel
makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to
specifications and products descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.
Download PDF