Hover-1 EU-H1-FLX Operation Manual

ELECTRIC SCOOTER
FLEX
O P E R AT I O N M A N U A L
EU - H 1 - FL X
HELMETS
SAVE
LIVES!
Always wear a properly fitted helmet that
complies with CPSC or CE safety standards
when you ride your scooter.
Correct Fitting:
Make sure your helmet
covers your forehead.
Incorrect Fitting:
Forehead is exposed
and vulnerable to
serious injury.
WARNING!
PLEASE READ THE USER MANUAL THOROUGHLY.
Failure to follow the basic instructions and safety precautions listed in
the user manual can lead to damage to your Flex, other property
damage, serious bodily injury, and even death.
Thank you for purchasing the Hover-1 Flex Electric Scooter. Please
read all instructions carefully before using and retain this manual for
future use and reference.
This manual applies to the Flex Electric Scooter.
• In order to avoid dangers that are caused by collisions, falls, and
loss of control, please learn how to ride the Flex safely.
• You can learn operating skills by reading the product manual and
watching videos.
• This manual includes all operating instructions and precautions,
and users must read it carefully and follow the instructions.
• Hover-1 can not be held liable for damage or injury caused by
failure to understand and follow the warnings and instructions in this
manual.
ATTENTION
1. Use only the supplied charger with this scooter.
Charger Manufacturer: Shenzhen Fuyuandian Power Co. Ltd
Model: XXXXXXX
2. The operating temperature range of the Flex is 32-104° F
(0-40° C).
3. Do not ride on icy or slippery surfaces.
4. Read the user manual and warning labels before riding.
5. Store the Flex in a dry, ventilated environment.
6. When transporting the Flex, avoid violent crashes or impact.
1
LOW TEMPERATURE WARNING
Low temperature will affect the lubrication of moving parts inside
the Flex scooter, increasing internal resistance. At the same time,
in low temperatures, the discharge capacity and the capacity
itself of the battery will be significantly decreased.
Use caution when riding the Flex in cold temperatures (below 40
degrees F).
Doing so may increase the risk of mechanical failures of the
scooter, which may lead to damage to your Flex, other property
damage, serious bodily injury and even death.
SAFETY INSTRUCTIONS
• Keep the Flex away from heat sources, direct sunlight, humidity,
water and any other liquids.
• Do not operate the Flex if it has been exposed to water,
moisture or any other liquids to prevent against electric shock,
explosion and/or injury to yourself and damage to the Flex.
• Do not use the Flex if it has been dropped or damaged in
any way.
• Repairs to electrical equipment should only be performed by
the manufacturer. Improper repairs voids the warranty and may
place the user at serious risk.
• Do not puncture or harm the exterior surface of the product in
any way.
• Keep the Flex free from dust, lint, etc.
• Do not use this Flex for anything other than its intended use or
purpose. Doing so may damage the Flex or lead to property
damage, injury or death.
• This product is not a toy. Keep out of reach of children.
• Do not expose batteries, battery pack, or batteries installed to
excessive heat, such as direct sunlight, or open flame.
• Do not allow hands, feet, hair, body parts, clothing or similar
articles to come in contact with moving parts, wheels or
drivetrain, while the engine is running.
2
• Do not operate or allow others to operate the Flex until the user
understands all instructions, warnings and safety features described
in this manual.
• Check with your doctor if you have a medical condition that
could affect your ability to use the Flex.
• Persons with head, back or neck ailments or prior surgeries to
those areas of the body are not recommended to use the Flex.
• Do not operate if you are pregnant, have a heart condition, or
have both.
• Persons with any mental or physical conditions that may make
them susceptible to injury or impair their physical or mental
capabilities to recognize, understand and perform all of the
safety instructions and to be able to assume the hazards inherent
in unit use, should not use the Flex.
NOTES:
In this manual, the above symbol with the word “NOTES” indicates
instructions or relevant facts the user should remember prior to using
the device.
CAUTION!
In this manual, the above symbol with the word “CAUTION”
indicates a hazardous situation which, if not avoided, can cause
minor or moderate injury.
WARNING!
In this manual, the above symbol with the word “WARNING”
indicates a hazardous situation which, if not avoided, can cause
death or serious injury.
SERIAL NUMBER
Please keep the serial number on file for warranty claims as well as
proof of purchase.
WARNING!
WARNING: Prolonged Exposure to UV Rays, Rain and the Elements
May Damage the Enclosure Materials.
Store Indoors When Not in Use.
3
INTRODUCTION
The Hover-1 Flex is a personal transporter. Our technology and
production processes are developed with strict testing for each Flex
scooter. Operating the Flex without following the contents of this
manual may lead to damage to your Flex or bodily injury.
This manual is designed to give you the information you need for the
safe operation and maintenance of your Flex. Please read it
thoroughly before riding your Flex.
PACKAGE CONTENTS
• Hover-1 Flex Electric Scooter
• Wall Charger
• Operation Manual
1
3
2
5
4
6
7
FEATURES/PARTS
1. Fender
2. Right Foot Mat
3. Battery Indicator
4. Left Foot Mat
8
5. Tire
6. Protective Chassis Casing
7. Power Button (Located in Rear)
8. Charge Port (Located in Rear)
4
OPERATING PRINCIPALS
The Flex uses digital electronic gyroscopes and acceleration sensors
to control balance and motion, depending on the user's center of
gravity. The Flex also uses a control system to drive the motors that
are located within the wheels. The Flex has a built-in inertia dynamic
stabilization system that can help assist with balance when moving
forward and backwards, but not while turning.
TIP – To increase your stability, you must shift your weight in order to
overcome the centrifugal force during turns, especially when
entering a turn at higher speeds.
WARNING
Any Flex that does not work properly can
cause you to lose control and fall. Inspect
the entire Flex thoroughly before every ride,
and do not ride it until any problems
have been corrected.
SPECIFICATIONS
Model:
Net Weight:
Load:
Max Speed:
Max Distance Range:
Max Incline Angle:
Minimum Turning Radius:
Charge Time:
Battery Type:
Battery Voltage:
Battery Capacity:
Power Requirement:
Ground Clearance:
Platform Height:
Tire Type:
Hover-1™ Flex (EU-H1-FLX)
5,5 kg (12,13 lbs )
20-60 kg (44-130 lbs)
Up to 9.5 km/h (6 mph)
Up to 4 km (3 miles)
5°
0°
Up to 5 hours
Lithium-ion
25,2 V
2,0Ah
AC 100-240V, 50/60Hz
3,05 cm (1,2 Inches)
11,43 cm (4,5 Inches)
Non-Pneumatic Solid Tires
5
CONTROLS AND DISPLAY
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
TURNING YOUR DEVICE ON/OFF
Power On: Take your Flex out of the box and place it flat on the floor.
Press the power button (located on the rear of your Flex) once.
Check the LED indicator (located in the center of your Flex). The
battery indicator light should be lit, indicating the Flex is powered on.
Power Off: Press the power button once.
MAT SENSOR
There are four sensors under the foot mats on your Flex.
When riding the scooter, you must ensure you are stepping on the
foot mats. Do not step or stand on any other area of your scooter.
The Flex may vibrate or spin in one direction, if weight and pressure
are applied to only one foot mat.
BATTERY INDICATOR
The display board is located in the middle of the Flex.
• Green LED Light indicates the hoverboard is fully charged.
• Red flashing LED light and beeping indicates low battery.
• Yellow light indicates the board is charging.
When the LED light turns red, please recharge the Flex.
6
BEFORE RIDING
It is important that you fully understand all elements of your Flex. If
these elements are not used correctly, you will not have full control
of your Flex. Before you ride, learn the functions of the various
mechanisms on your scooter.
Practice using these elements of your Flex at slower speeds in a flat,
open area before taking the Flex out in public areas.
PRE-RIDE CHECKLIST
Ensure that your Flex is in proper working order each and every time
you ride. If a part of the scooter does not function correctly, please
contact our Customer Support Center.
WARNING
Any Flex that does not work properly
can cause you to lose control and fall.
Do not ride a Flex with a part that is
damaged; replace the damaged part
before riding.
• Ensure the battery is fully charged before riding your scooter.
• Ensure that the screws on the front and back tires are locked firmly
before each ride.
• Please wear all appropriate safety and protective gear as
previously mentioned in the User Manual before operating your Flex.
• Make sure to wear comfortable clothes and flat closed-toe shoes
when operating your Flex.
• Please carefully read the User Manual, which will assist in
explaining the basic working principles and provide tips on how to
best enjoy your experience.
7
SAFETY PRECAUTIONS
Different localities and countries have different laws governing riding
on public roads, and you should check with local officials to ensure
you are complying with these laws.
Hover-1 is not liable for tickets or violations given to riders who do not
follow local laws and regulations.
• For your safety, always wear a helmet that meets CPSC or CE
safety standards. In the event of an accident, a helmet can protect
you from serious injury and in some cases, even death.
• Obey all local traffic laws. Obey red and green lights, one-way
streets, stop signs, pedestrian crosswalks, etc.
• Ride with traffic, not against it.
• Ride defensively; expect the unexpected.
• Give pedestrians the right-of-way.
• Do not ride too close to pedestrians and alert them if you intend to
pass them from behind.
• Slow down at all street intersections and look to the left and right
before crossing.
Your Flex is not equipped with reflectors. It is not recommended that
you ride in conditions of low visibility.
WARNING
When you ride in low-visibility conditions
such as fog, dusk, or night, you might be
difficult to see, which could lead to a
collision. In addition to keeping your
headlight on, wear bright, reflective
clothing when riding in poor lighting
conditions.
Think about safety when you ride. You can prevent many
accidents if you think about safety. Below is a helpful checklist for
Compact riders.
8
SAFETY CHECKLIST
• Do not ride above your skill level. Ensure you have had enough
practice with all functions and features of your Flex.
• Before stepping on your Flex, make sure it is placed flat on level
ground, the power is on, and the Running Indicator light is green. Do
not step on if the Running Indicator light is red.
• Do not try to open or modify your Flex. Doing so, voids the
manufacturer warranty and may cause your Flex to fail, resulting in
injury or death.
• Do not use the Flex in a manner that would put people or property
in danger.
• If riding near others, keep a safe distance to avoid collision.
• Be sure to keep your feet on the pedals at all times. Moving your
feet off your Flex while driving is dangerous and may cause the Flex
to stop or veer sideways.
• Do not operate the Flex while under the influence of drugs and/or
alcohol.
• Do not operate the Flex when you are restless or sleepy.
• Do not ride your Flex off of curbs, ramps, or attempt to operate in
a skate park, empty pool, or in any way similar to a skateboard or
scooter. The Flex IS NOT A SKATEBOARD. Misuse of your Flex, voids the
manufacturer warranty and may lead to injury or damage.
• Do not continuously spin in place, it will cause dizziness and
increases risk of injury.
• Do not abuse your Flex, doing so can damage your unit and
cause failure to the operating system leading to injury. Physical
abuse, including dropping your Flex, voids the manufacturer
warranty.
• Do not operate in or near puddles of water, mud, sand, stones,
gravel, debris or near rough and rugged terrain.
• The Flex can be used on paved surfaces that are flat and even. If
you encounter uneven pavement, please lift your Flex over and past
the obstruction.
9
• Do not ride in inclement weather: snow, rain, hail, sleek, on icy
roads or in extreme heat or cold.
• Bend your knees when riding on bumpy or uneven pavement to
absorb the shock and vibration and help you keep your balance.
• If you are unsure if you can safely ride on a specific terrain, step off
and carry your Flex. ALWAYS BE ON THE SIDE OF CAUTION.
• Do not attempt to ride over bumps or objects greater then ½ in.
even when prepared and bending your knees.
• PAY ATTENTION - look at where you are riding and be
conscious of the road conditions, people, places, property and
objects around you.
• Do not operate the Flex in crowded areas.
• Operate your Flex with extreme caution when indoors, especially
around people, property, and narrow spaces.
• Do not operate the Flex while talking, texting, or looking at your phone.
• Do not ride your Flex where it is not permitted.
• Do not ride your Flex near motor vehicles or on public roads.
• Do not travel up or down steep hills.
• The Flex is intended for use by a single individual, DO NOT attempt
to operate the Flex with two or more people.
• Do not carry anything while riding the Flex.
• Individuals with lack of balance should not attempt to operate
the Flex.
• Pregnant women should not operate the Flex.
• The Flex is recommended for riders ages 8 and older.
• At higher speeds, always take into consideration longer stopping
distances.
• Do not step forward off of your Flex.
• Do not attempt to jump on or off your Flex.
10
• Do not attempt any stunts or tricks with your Flex.
• Do not ride the Flex in dark or poorly lit areas.
• Do not ride the Flex off road, near or over potholes, cracks or
uneven pavement or surfaces.
• Keep in mind that you are 4.5 inches (11.43 cm) taller when
operating the Flex. Make sure to go through doorways safely.
• Do not turn sharply, especially at high speeds.
• Do not step on the fenders of the Flex.
• Avoid driving the Flex in unsafe places, including near areas with
flammable gas, steam, liquid, dust or fiber, which could cause fire
and explosion accidents.
• Do not operate near swimming pools or other bodies of water.
WARNING:
To reduce the risk of injury, adult supervision is
required. Never use in roadways, near motor
vehicles, on or near steep inclines or steps, swimming
pools or other bodies of water; always wear shoes,
and never allow more than one rider.
11
RIDING YOUR FLEX
FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS
CAN AND MAY LEAD TO DAMAGE TO YOUR FLEX, VOID YOUR
MANUFACTURER WARRANTY, LEAD TO PROPERTY DAMAGE, CAUSE
SERIOUS BODILY INJURY, AND CAN LEAD TO DEATH.
Before using your Flex, be sure to familiarize yourself with the
operating procedures.
OPERATING YOUR FLEX
Make sure the Flex is fully charged before initial use. For charging
instructions, please follow details under CHARGING YOUR FLEX.
Stand directly behind your Flex and place one foot on the
corresponding foot mat (as described in the diagram below). Keep
your weight on the foot which is still on the ground, otherwise the Flex
may begin to move or vibrate, making it difficult to step on evenly
with your other foot. When you are ready, shift your weight to the
foot already placed on the Flex and step on with your second foot
quickly and evenly (as described in the diagram below).
NOTES:
Stay relaxed and step on quickly, confidently
and evenly. Imagine climbing stairs, one
foot, then the other. Look up once your feet
are even. The Flex may vibrate or spin in one
direction, if weight and pressure are applied
to only one foot mat. THIS IS NORMAL.
Find your center of gravity. If your weight is distributed correctly on
the foot mats and your center of gravity is level, you should be able
to stand on your Flex just as if you were standing on the ground.
On average, it takes 3-5 minutes just to get comfortable standing on
12
your Flex and maintaining proper balance. Having a spotter will
help you feel more secure. The Flex is an incredibly intuitive device; it
senses even the slightest bit of motion, so having any anxiety or
reservation about stepping on may cause you to panic and trigger
unwanted movement.
When you first begin using your Flex, the fastest way to move in your
desired direction is to focus in that direction. You will notice that just
thinking about which way you would like to go will shift your center
of gravity, and that subtle movement will propel you in that
direction.
Your center of gravity determines which direction you move,
accelerate, decelerate, and come to a complete stop. As
described in the diagram below, tilt your center of gravity in the
direction you wish to move.
To turn, focus on the direction you wish to turn and stay relaxed.
WARNING
Do not turn sharply or at high speeds to
avoid danger. Do not turn or ride quickly
along slopes, as it may cause injury.
As you get comfortable on the Flex, you will notice it becomes
easier to maneuver. Remember at higher speeds, it is necessary to
shift your weight to overcome the centrifugal force.
Bend your knees if you encounter bumps or uneven surfaces, then
dismount and carry your Flex to a safe operating surface.
Move Backward
Stop
13
Move Forward
NOTES:
Try staying relaxed and focus on finding
your center of gravity to maintain full
control of your Flex.
Dismounting your Flex can be one of the easiest steps, yet when
done incorrectly, may cause you to fall. To properly dismount, from
a stopped position, lift one leg up and set your foot back down on
the ground (STEPPING BACK). Then step off completely as described
in the following diagram.
WARNING
Make sure to lift your feet completely off
the foot mat to clear the Flex when
stepping back to dismount. Failure to
do so may send the Flex into a tailspin.
WEIGHT AND SPEED LIMITATIONS
Speed and weight limits are set for your own safety. Please do not
exceed the limits listed here in the manual.
• Maximum Weight: 60 kg /130 lbs
• Minimum Weight: 20 kg / 44 lbs
• Maximum Speed: Up to 9.5 km/h / 6 mph
14
WARNING
Overweight exertion on the Flex may
increase possibility of injury or product
damage.
NOTES:
To prevent injury, when max speed is
reached, the Flex will beep to alert the
user and tilt the rider slowly back.
OPERATING RANGE
The Flex can travel a distance up to 3 miles on a fully charged
battery in ideal conditions. The following are some of the major
factors that will affect the operating range of your Flex.
• Terrain: Riding distance is highest when riding on a smooth, flat
surface. Riding uphill and/or on rough terrain will reduce distance
significantly.
• Weight: A lighter user will have further range than a heavier user.
• Ambient temperature: Please ride and store the Flex under
recommended temperatures, which will increase riding distance,
battery life, and overall performance of your Flex.
• Speed and Riding Style: Maintaining a moderate and consistent
speed while riding produces maximum distance. Traveling at high
speeds for extended periods, frequent starts and stops, idling and
frequent acceleration or deceleration will decrease overall
distance.
BALANCE & CALIBRATION
If your Flex is unbalanced, vibrating, or not turning properly, you can
follow the below steps to calibrate it.
• First, place the Flex on a flat, horizontal surface such as the floor or
a table. The foot mats should be even with each other and not
tilted forward or backward. Make sure the charger is not plugged
in and the board is turned off.
• Press and hold the ON/OFF button for a total of 15 seconds. The
scooter will turn on, lighting the battery indicator on the board.
• After the light flashes 5 times consecutively you may release the
ON/OFF button.
• Turn the board off and then turn the board back on. Calibration
will now be completed.
15
SAFETY ALERTS
While riding your Flex, if there is a system error or improper operation
performed, the Flex will prompt the user in a variety
of ways.
You will notice the Running Indicator Light will turn RED and you will
hear a beep sound alerting you to take precaution and cease
operation, which may make the device stop suddenly.
The following are common occurrences where you will hear the
Safety Alerts. These notices should not be ignored, but appropriate
action should be taken to correct any illegal operation, failure or
errors.
• Unsafe riding surfaces (uneven, too steep, unsafe, etc.)
• When you step on the Flex, if the platform is tilted more than 10
degrees forward or backward.
• Battery voltage is too low.
• The Flex is still charging.
• During operation, the platform self initiates to tilt due to excess
speed.
• Overheating, or motor temperature is too high.
• The Flex has been rocking back and forth for over 30 seconds.
• If the system enters protection mode, the alarm indicator will light
up and the board will vibrate. This typically occurs when the battery
is about to run out of power.
• If the platform is tilted forward or backward more than 10 degrees,
your Flex will power off and stop suddenly, possibly causing the rider
to lose balance or fall off.
• If any or both tires are blocked, the Flex will stop after 2
seconds.
• When the battery level has depleted below protection mode, the
Flex engine will power off and stop after 15 seconds.
16
• While sustaining a high discharge current during use (such as
driving up a steep slope for a long period of time), the Flex engine
will power off and stop after 15 seconds.
WARNING
When the Flex turns off during a Safety
Alert, all operation systems will halt. Do
not continue attempting to ride the Flex
when the system initiates a stop. Turn
your Flex off and back on to unlock it
from a Safety Lock.
CHARGING YOUR FLEX
CHARGING THE FLEX
• Ensure that the charging port is clean and dry.
• Make sure that there is no dust, debris or dirt inside the port.
• Plug the charger into a grounded wall outlet. The charging
indicator light ON THE CHARGER will be green.
• Connect the cable with the power supply (100V ~ 240V; 50/60 Hz).
• Align and connect the 3-pin charging cable into the charging
port of the Flex. DO NOT FORCE THE CHARGER INTO THE CHARGE
PORT, AS THIS MAY CAUSE THE PRONGS TO BREAK OFF OR
PERMANENT DAMAGE TO THE CHARGE PORT.
• Once attached to the board, the charging indicator light ON THE
CHARGER should change to RED, indicating that your device is now
being charged.
• When the RED indicator light on your charger turns to GREEN, then
your Flex is fully charged.
• A full charge may take up to 6 hours. While charging, you will see
a yellow flashing light on the scooter, which also indicates charging.
Do not charge for more than 7.5 hours.
•After fully charging your Flex, unplug the charger from your Flex
and from the power outlet.
17
BATTERY CARE / MAINTENANCE
BATTERY SPECIFICATIONS
Battery Type: Rechargeable lithium-ion battery
Charge Time: Up to 5 hours
Voltage: 22.4V
Initial Capacity: 2.0 AH
BATTERY MAINTENANCE
The lithium-ion battery is built into the Flex. Do not disassemble
the Flex to remove the battery or attempt to separate it from
the Flex.
• Use only the charger and charging cable supplied by Hover-1.
Use of any other charger or cable may lead to damage to the
product, overheating and risk of fire. Use of any other charger or
cable voids the manufacturer warranty.
• Do not connect or attach the Flex or the battery to a power
supply plug or directly to a car’s cigarette lighter.
• Do not place the Flex or batteries near a fire, or into direct sunlight.
Heating the Flex and/or the battery can cause additional heating,
breaking, or ignition of the battery inside the Flex.
• Do not continue charging the battery if it does not recharge
within the specified charging time. Doing so may cause the battery
to become hot, rupture, or ignite.
To preserve natural resources, please recycle or dispose of batteries
properly. This product contains lithium-ion batteries. Local, state, or
federal laws may prohibit disposal of lithium-ion batteries in ordinary
trash. Consult your local waste authority for information regarding
available recycling and/or disposal options.
• Do not attempt to modify, change, or replace your battery.
WARNING
Failure to follow the safety precautions
listed below could lead to serious
bodily injury and/or death.
18
• Use only the charger and charging cable supplied by Hover-1.
Use of any other charger or cable may lead to damage to the
product, overheating and risk of fire. Use of any other charger or
cable voids the manufacturer warranty.
• Do not use your Flex if the battery begins to emit odor, overheats,
or begins to leak.
• Do not touch any leaking materials or breathe fumes emitted.
• Do not allow children and animals to touch the battery.
• The battery contains dangerous substances, do not open the
battery, or insert anything into the battery.
• Only use the charger provided by Hover-1.
• Do not attempt to charge the Flex if the battery has discharge or
emits any substances. In that case, immediately distance yourself
from the battery in case of fire or explosion.
• Lithium-ion batteries are considered to be hazardous materials.
Please follow all local, state and federal laws in regards to recycling,
handling and disposing of Lithium-ion batteries.
WARNING
SEEK IMMEDIATE MEDICAL ASSISTANCE IF
YOU ARE EXPOSED TO ANY SUBSTANCE
THAT IS EMITTED FROM THE BATTERY.
19
CARE & MAINTENANCE
• Do not expose the Flex to liquid, moisture, or humidity to avoid
damage to the product's internal circuitry.
• Do not use abrasive cleaning solvents to clean the Flex.
• Do not expose the Flex to extremely high or low temperatures as
this will shorten the life of the electronic components, destroy the
battery, and/or distort certain plastic parts.
• Do not dispose of the Flex in fire as it may explode or combust.
• Do not expose the Flex to contact with sharp objects as this will
cause scratches and damage.
• Do not allow the Flex fall from high places, as doing so may
damage the internal circuitry.
• Do not attempt to disassemble the Flex.
• Use only the charger provided by Hover-1.
WARNING
Avoid using water or other liquids for
cleaning. If water or other liquids enter
the Flex, it will cause permanent
damage to the internal components.
WARNING
Users who disassemble the Flex scooter
without permission will void the
warranty.
20
WARRANTY
For warranty information, Please visit us at:
www.hover-1.eu
Affix Serial Number Label Here:
TROUBLESHOOTING
For UK Customer Service, please contact +44 (0) 1355 241222 /
[email protected]
For other countries, please scan QR code below for more
information.
WEEE DIRECTIVE
Following information is only for EU-member states: The mark
shown to the right is in compliance with the Waste Electrical and
Electronic Equipment Directive 2012/19/EU (WEEE). The mark
indicates the requirement NOT to dispose the equipment as
unsorted municipal waste, but use the return and collection
systems according to local law.
EC DECLARATION OF CONFORMITY
https://drive.google.com/file/d/1Zzdz0tJ41mCBJ3vHjrv2hKnXhiEb
CiOk/view?usp=sharing
21
CHARGER LABEL
use with: drive (eu-h1-flex)
SWITCHING POWER SUPPLY
model: XXXXX
input: 100-240 vac, 50/60Hz,
0.8A max
ip20
output: 26V 0.4A ta=40 oC
risk of electrical shock.
please do not open.
for indoor use only.
dry location use only.
do not remove this tag.
I.T.E. POWER SUPPLY
E350715
made in china
Shenzhen Fuyuandian Power Co.,ltd
SCOOTER LABELS
FLEX
Model: EU-H1-FLX
BC
Voltage: 22,4V
Maximum Weight: 60 kg / 130 lbs
Minimum Weight: 20 kg / 44 lbs
Maximum Speed: Up to 9.5 km/h / 6 mph
Battery Capacity: 2.0 Ah
Battery Type: Rechargeable Lithium-ion battery
Made in: Shenzhen, Guangdong, China
Ref: XXXXXXX MFG Date: XXXXX
PO: XXXXXXX
Manufacturer: DGL Group
LE5 1TL, United Kingdom
MADE IN CHINA
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
WARNING - To reduce the risk of injury, user must read
instruction manual. Store indoors when not in use.
22
FOR YOUR SAFETY, PLEASE READ THE
ENTIRE USER MANUAL BEFORE OPERATING
THE HOVER-1 SCOOTER.
• Always wear proper protective equipment, such as
helmets. Helmets should fit properly with the chin strap in
place, so that it provides protection for your entire head.
• Accelerate gradually. Never lunge or tilt forward
suddenly during operation.
• Avoid obstacles and slippery surfaces that could result in
a loss of balance or traction and cause a fall.
• Do not attempt to accelerate when you hear the beep
warning for speeding.
• Do not start on rocky, slippery, sandy, gravelly, sloped,
or wet surfaces.
• Riders should be at least 8 years old and 5 feet tall.
• Maximum weight load is 60 kg.
• Adult supervision required.
• Always wear shoes.
• Never use near or around motor vehicles.
• Do not ride at night.
• Do not operate near swimming pools or other bodies
of water.
FAILURE TO FOLLOW THE ABOVE INSTRUCTIONS
AND OTHER MISUSE CAN RESULT IN DEATH OR
SERIOUS INJURY OR DAMAGE TO THE PRODUCT.
USE AT YOUR OWN RISK. HOVER-1 MODEL: EU-H1-FLX
IMPORTED BY: DGL Group, LE5 1TL, United Kingdom
WARNING: Risk of Fire - No User Serviceable Parts
WARNING - TO REDUCE RISK OF INJURY,
USER MUST READ INSTRUCTION MANUAL
• Wear an approved helmet and appropriate safety gear.
• Do not ride vehicle after consuming drugs or alcohol.
• Do not ride without proper training and guidance.
• Do not ride at high speeds, on steep slopes, or in rocky or
uneven terrain.
• Do not carry passengers. Do not perform stunts, tricks, or
turn sharply.
• Do not leave unattended while charging. Do not charge for
more than 7.5 hours. Allow to cool before charging.
• You must comply with all applicable local, state, and federal
laws when operating this device.
• Use only the supplied charger with this scooter.
• Use only the supplied battery pack with this
scooter. (22.4V, 2.0Ah)
• Use only with specified manufactured and model
charger in instruction.
HOVER-1 MODEL: EU-H1-FLX
CONTROL NUMBER: 5GX3
26V DC, 0.4A, 32-104° F (0-40° C)
IMPORTED BY: DGL Group, LE5 1TL, United Kingdom
23
MADE IN CHINA
@RideHover1
@RideHover1
@RideHover1
www.Hover-1.eu