Teltonika FMB001 Quick Manual

FMB001
Easy OBDII tracker
Quick Manual v1.6
CONTENT
Know your device.................................................................................................................................................................................................3
Pinout....................................................................................................................................................................................................................4
Set up your device...............................................................................................................................................................................................5
PC Connection (Windows)...................................................................................................................................................................................6
How to install USB drivers (Windows)...............................................................................................................................................................6
Configuration.......................................................................................................................................................................................................7
Quick SMS configuration.....................................................................................................................................................................................9
Mounting recommendations.......................................................................................................................................................................... 11
Basic characteristics......................................................................................................................................................................................... 12
LED indications.................................................................................................................................................................................................. 12
Safety information ........................................................................................................................................................................................... 15
Certification and Approvals............................................................................................................................................................................. 16
Warranty............................................................................................................................................................................................................ 18
Warranty disclaimer ........................................................................................................................................................................................ 18
Quick Manual v1.6 // FMB001
2
KNOW YOUR DEVICE
TOP VIEW
TOP VIEW (WITHOUT COVER)
BATTERY
SOCKET
OBDII
MICRO-USB
CONNECTOR
NAVIGATE
LED
STATUS
LED
MICRO-SIM
SLOT
Quick Manual v1.6 // FMB001
3
PINOUT
PIN NUMBER
PIN NAME
DESCRIPTION
1
DIN1
Ignition input
2
PWM_BUS+/VPW
4
GND (-)
Ground
5
GND (-)
Ground
6
CAN_H
CAN high
7
K-Line
10
PWM_BUS-
14
CAN_L
15
L-Line
16
VCC (10 - 30)V
DC(+)
CAN low
PIN10
PIN1
PIN2
PIN14 PIN15 PIN16
PIN4
PIN5
PIN6
PIN7
FMB001 OBDII socket pinout
Power supply (+10-30
V DC)
Quick Manual v1.6 // FMB001
4
SET UP YOUR DEVICE
HOW TO INSERT MICRO-SIM CARD AND CONNECT THE BATTERY
1
COVER REMOVAL
Gently
remove
FMB001
cover using plastic pry tool
from both sides.
2
MICRO-SIM CARD INSERT
Insert Micro-SIM card as
shown with PIN request
disabled or read our Wiki1
how to enter it later in
Teltonika
Configurator2.
Make sure that MicroSIM card cut-off corner is
pointing forward to slot.
3
BATTERY CONNECTION
Connect battery as shown to
device. Position the battery
in place where it does not
obstruct other components.
4
ATTACHING COVER BACK
Attach device cover back.
Device is ready to be
connected.
1
wiki.teltonika-gps.com/view/
FMB001_Security_info
2
wiki.teltonika.lt/view/Teltonika_
Configurator
Quick Manual v1.6 // FMB001
5
PC CONNECTION (WINDOWS)
1.
Power-up FMB001 with DC voltage (10 – 30 V) power supply using supplied power cable. LED’s should start blinking, see “LED
indications1”.
2.
Connect device to computer using Micro-USB cable or Bluetooth connection:
•
Using Micro-USB cable
•
•
You will need to install USB drivers, see “How to install USB drivers (Windows)2”
Using Bluetooth
• FMB001 Bluetooth is enabled by default. Turn on Bluetooth on your PC, then select Add Bluetooth or other device >
Bluetooth. Choose your device named – “FMBxxx_last_7_imei_digits”, without LE in the end. Enter default password 5555,
press Connect and then select Done.
3.
You are now ready to use the device on your computer.
1
wiki.teltonika-gps.com/view/FMB001_LED_status
2
Page 6, "How to install USB drivers"
HOW TO INSTALL USB DRIVERS (WINDOWS)
1.
Please download COM port drivers from here1.
2.
Extract and run TeltonikaCOMDriver.exe.
3.
Click Next in driver installation window.
4.
In the following window click Install button.
5.
Setup will continue installing the driver and eventually the confirmation window will appear. Click Finish to complete the
setup.
1
teltonika-gps.com/downloads/en/fmb120/TeltonikaCOMDriver.zip
Quick Manual v1.6 // FMB001
6
CONFIGURATION
At first FMB001 device will have default factory settings set. These settings should be changed according to the users needs. Main
configuration can be performed via Teltonika Configurator1 software. Get the latest Configurator version from here2. Configurator
operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed.
1
wiki.teltonika-gps.com/view/Teltonika_Configurator
2
wiki.teltonika-gps.com/view/Teltonika_Configurator_versions
MS .NET REQUIREMENTS
Operating system
MS .NET Framework version
Version
Links
MS .NET Framework 4.6.2
32 and 64 bit
www.microsoft.com1
Windows Vista
Windows 7
Windows 8.1
Windows 10
1 dotnet.microsoft.com/en-us/download/dotnet-framework/net462
Quick Manual v1.6 // FMB001
7
Various Status window1 tabs display information about GNSS2,
GSM3, I/O4, Maintenance5 and etc. FMB001 has one user
editable profile, which can be loaded and saved to the device.
After any modification of configuration the changes need to
be saved to device using Save to device button. Main buttons
offer following functionality:
Load from device – loads configuration from device.
Save to device – saves configuration to device.
Load from file – loads configuration from file.
Save to file – saves configuration to file.
Update firmware – updates firmware on device.
FM
B0
01
Downloaded Configurator will be in compressed archive.
Extract it and launch Configurator.exe. After launch software
language can be changed by clicking 🌐 in the right bottom
corner.
Configuration process begins by pressing on connected device.
Read records – reads records from the device.
Reboot device – restarts device.
Reset configuration – sets device configuration to
default.
FM
B0
01
Most important configurator section is GPRS – where all
your server and GPRS settings6 can be configured and Data
Acquisition7 – where data acquiring parameters can be
configured. More details about FMB001 configuration using
Configurator can be found in our Wiki8.
After connection to Configurator Status window will be
displayed.
1
wiki.teltonika-gps.com/view/FMB001_Status_info
2
wiki.teltonika-gps.com/view/FMB001_Status_info#GNSS_Info
3
wiki.teltonika-gps.com/view/FMB001_Status_info#GSM_Info
4
wiki.teltonika-gps.com/view/FMB001_Status_info#I.2FO_Info
5
wiki.teltonika-gps.com/view/FMB001_Status_info#Maintenance
6
wiki.teltonika-gps.com/index.php?title=FMB001_GPRS_settings
wiki.teltonika-gps.com/index.php?title=FMB001_Data_acquisition_
settings
7
8
wiki.teltonika-gps.com/index.php?title=FMB001_Configuration
Quick Manual v1.6 // FMB001
8
QUICK SMS CONFIGURATION
Default configuration has optimal parameters present to ensure best performance of track quality and data usage.
Quickly set up your device by sending this SMS command to it:
«
setparam 2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0»
1
2
3
4
5
6
Note: Before SMS text, two space symbols should be inserted.
GPRS SETTINGS:
1
2001 – APN
2
2002 – APN username (if there are no APN username,
empty field should be left)
2003 – APN password (if there are no APN password,
empty field should be left)
3
SERVER SETTINGS:
4
2004 – Domain
5
2005 – Port
6
2006 – Data sending protocol (0 – TCP, 1 – UDP)
Quick Manual v1.6 // FMB001
9
DEFAULT CONFIGURATION SETTINGS
MOVEMENT AND IGNITION DETECTION:
DEVICE MAKES A RECORD ON MOVING
IF ONE OF THESE EVENTS HAPPEN:
VEHICLE MOVEMENT
will be detected by
accelerometer
IGNITION
will be detected by
vehicle power voltage
between 13,2 – 30 V
PASSES
300 seconds
VEHICLE DRIVES
100 meters
DEVICE MAKES A
RECORD ON STOP IF:
RECORDS SENDING TO
SERVER:
VEHICLE TURNS
10 degrees
SPEED DIFFERENCE
between last coordinate
and current position is
greater than 10 km/h
1 HOUR PASSES
while vehicle is
stationary and
ignition is off
EVERY 120 SECOND
it is sent to the server
If device has made a
record
After successful SMS configuration, FMB001 device will synchronize time and update records to configured server. Time intervals
and default I/O elements can be changed by using Teltonika Configurator1 or SMS parameters2.
1
wiki.teltonika-gps.com/view/Teltonika_Configurator
2
wiki.teltonika-gps.com/view/Template:FMB_Device_Family_Parameter_list
Quick Manual v1.6 // FMB001
10
MOUNTING RECOMMENDATIONS
CONNECTING THE DEVICE TO THE VEHICLE:
Find OBDII connector in your vehicle.
Most common OBDII connector locations.
Quick Manual v1.6 // FMB001
11
LED INDICATIONS
BASIC CHARACTERISTICS
NAVIGATION LED INDICATIONS
MODULE
BEHAVIOUR
MEANING
Permanently
switched on
GNSS signal is not received
Blinking every
second
Normal mode, GNSS is working
Name
Teltonika TM2500
Technology
GSM/GPRS/GNSS/BLUETOOTH
GNSS
GNSS
GNSS is turned off because:
Off
Device is not working or Device is in
GPS, GLONASS, GALILEO, BEIDOU,
SBAS, QZSS, DGPS, AGPS
Receiver
33 channel
Tracking sensitivity
-165 dBM
Accuracy
<3m
Hot start
<1s
STATUS LED INDICATIONS
Warm start
< 25 s
BEHAVIOUR
MEANING
Cold start
< 35 s
Blinking every
second
Normal mode
CELLUAR
Blinking every two
seconds
Sleep mode
Blinking fast for a
short time
Modem activity
Off
Device is not working or Device is in
boot mode
sleep mode
Blinking fast
constantly
Device firmware is being flashed
Technology
2G bands
Data transfer
Data support
GSM
Quad-band 850 / 900 / 1800 / 1900
MHz
GPRS Multi-Slot Class 12 (up to 240
kbps), GPRS Mobile Station Class B
SMS (text/data)
Quick Manual v1.6 // FMB001
12
Up to 32 vehicle onboard
parameters:
POWER
Input voltage range
10 - 30 V DC with overvoltage
protection
SAE J1850 PWM (41.6 kbaud)
Internal fuse
3A, 125V
ISO 9141-2 (5 baud init, 10.4 kbaud)
At 12V < 5 mA (Ultra Deep Sleep)
ISO 14230-4 KWP (5 baud init, 10.4
kbaud)
SAE J1850 VPW (10.4 kbaud)
At 12V < 7 mA (Deep Sleep)
At 12V < 7 mA (Online Deep Sleep)
Power Consumption
Data reading
At 12V < 8 mA (GPS Sleep)
ISO 15765-4 CAN (11 bit ID, 250
kbaud)
At 12V < 28 mA (nominal with no
ISO 15765-4 CAN (11 bit ID, 500
kbaud)
load))
At 12V < 0.25 A Max. (with full Load /
ISO 15765-4 CAN (29 bit ID, 250
kbaud)
Peak)
ISO 15765-4 CAN (29 bit ID, 500
kbaud)
BLUETOOTH
Specification
Supported
peripherals
4.0 + LE
Temperature and Humidity
sensor1, Inateck Barcode Scanner
OBD INTERFACE
Data
1
ISO 14230-4 KWP (fast init, 10.4
kbaud)
K-Line, CAN Bus data
INTERFACE
Digital Inputs
1
Connection
OBDII socket
GNSS antenna
Internal High Gain
GSM antenna
Internal High Gain
USB
2.0 Micro-USB
LED indication
2 status LED lights
SIM
Micro-SIM
Memory
128MB internal flash memory
teltonika.lt/product/bluetooth-sensor/
Quick Manual v1.6 // FMB001
13
Scenarios
Green Driving, Over Speeding
detection, Jamming detection,
GNSS Fuel Counter, Excessive
Idling detection, Unplug detection,
Towing detection, Crash detection,
Auto Geofence, Manual Geofence,
Trip2
Sleep modes
GPS Sleep, Online Deep Sleep,
Deep Sleep, Ultra Deep Sleep3
Configuration and
firmware update
FOTA Web4, FOTA5, Teltonika
Configurator6 (USB, Bluetooth),
FMBT mobile application7
(Configuration)
SMS
Configuration, Events, Debug
GPRS commands
Configuration, Debug
Time
Synchronization
GPS, NITZ, NTP
OBDII
PHYSICAL SPECIFICATION
Dimensions
67,2 x 49,6 x 25 mm (L x W x H)
Weight
63 g
OPERATING ENVIRONMENT
Operating
temperature
(without battery)
-40 °C to +85 °C
Storage temperature
(without battery)
-40 °C to +85 °C
Operating humidity
5% to 95% non-condensing
Operating
Temperature (with
battery)
-20C to + 40C
Ingress Protection
Rating
IP41
Fuel monitoring
Battery charge
temperature
0 °C to +45 °C
Ignition detection
Battery discharge
temperature
-20 °C to +60 °C
Battery storage
temperature
External Power Voltage, Engine RPM
2
wiki.teltonika-gps.com/view/FMB001_Features_settings
-20 °C to +45 °C for 1 month
3
wiki.teltonika-gps.com/view/FMB001_Sleep_modes#Deep_Sleep_mode
-20 °C to +35 °C for 6 months
4
wiki.teltonika-gps.com/view/FOTA_WEB
5
wiki.teltonika-gps.com/view/FOTA
6
wiki.teltonika-gps.com/view/Teltonika_Configurator
7
wiki.teltonika-gps.com/view/FMBT_Mobile_application
FEATURES
Sensors
Digital Input 1, Accelerometer,
Accelerometer
Quick Manual v1.6 // FMB001
14
SAFETY INFORMATION
This message contains information on how to operate FMB001
safely. By following these requirements and recommendations,
you will avoid dangerous situations. You must read these
Do not disassemble the device. If the device is
damaged, the power supply cables are not isolated
or the isolation is damaged, DO NOT touch the
device before unplugging the power supply.
All wireless data transferring devices produce
interference that may affect other devices which are
placed nearby.
instructions carefully and follow them strictly before operating
the device!
•
The device uses SELV limited power source. The nominal
voltage is +12 V DC. The allowed voltage range is +10…+30
V DC.
•
To avoid mechanical damage, it is advised to transport
Please consult representatives of your vehicle
model regarding OBDII location on your vehicle.
In case you are not sure about proper connection,
please consult qualified personnel.
The programming must be performed using a PC
with autonomic power supply.
the device in an impact-proof package. Before usage,
the device should be placed so that its LED indicators are
visible. They show the status of device operation.
•
Installation and/or handling during a lightning storm
is prohibited.
Before unmounting the device from vehicle, ignition
MUST be OFF.
The device is susceptible to water and humidity.
Teltonika is not responsible for any harm caused by
wrong cables used for connection between PC and
FMB001
WARNING! Do not use FMB001 device if it distracts
driver or causes inconvenience due to OBDII
placement. Device must not interfere with driver.
Battery should not be disposed of with general
household waste. Bring damaged or worn-out
batteries to your local recycling center or dispose
them to battery recycle bin found in stores.
Quick Manual v1.6 // FMB001
15
CERTIFICATION AND APPROVALS
This sign on the package means that it is necessary
to read the User‘s Manual before your start using the
device. Full User‘s Manual version can be found in
our Wiki1.
This sign on the package means that all used
electronic and electric equipment should not be
mixed with general household waste.
1 wiki.teltonika-gps.com/index.php?title=FMB001
The Declaration EAC and the Certificate EAC in
conformity with the technical regulation TR CU of
the EurAsEC Customs Union are EAC certification
documents issued by independent organizations.
Such organizations perform their function through
laboratories accredited to the public agencies
in charge of the supervision of metrology and
standardization in the three countries of the
EAC Custom Union, joining at the moment the
certification system : Russia, Belarus, Kazakhstan,
Armenia and Kyrgyzstan.
Hereby, Teltonika declare under our sole
responsibility that the above described product
is in conformity with the relevant Community
harmonization: European Directive 2014/53/EU
(RED).
UK Conformity Assessed (UKCA) marking is a
conformity mark that indicates conformity with
the applicable requirements for above described
products sold within Great Britain.
The RoHS1 is a directive regulating the manufacture,
import and distribution of Electronics and Electrical
Equipment (EEE) within the EU, which bans from use
10 different hazardous materials (to date).
REACH
REACH addresses the production and use of
chemical substances, and their potential impacts
on both human health and the environment. Its
849 pages took seven years to pass, and it has been
described as the most complex legislation in the
Union's history and the most important in 20 years.
It is the strictest law to date regulating chemical
substances and will affect industries throughout the
world.
E-Mark and e-Mark are the European conformity
marks issued by the transport sector, indicating
that the products comply with relevant laws and
regulations or directives. Vehicles and related
products need to go through the E-Mark certification
process to be legally sold in Europe.
DECLARATION OF IMEI ASSIGNMENT
The IMEI number is used by a GSM network to identify valid
devices and therefore can be used for stopping a stolen phone
from accessing that network. For example, if a mobile phone is
stolen, the owner can call their network provider and instruct
them to blacklist the phone using its IMEI number. This renders
the phone useless on that network and sometimes other
networks too, whether or not the phone's subscriber identity
module (SIM) is changed.
Quick Manual v1.6 // FMB001
16
SDPPI (Direktur Jenderal Sumber Daya dan
Perangkat Pos dan informatika) is Indonesian
Directorate General of Resources and Equipment
for Post and Information Technology.
DECLARATION OF DEVICE OPERATION TEMPERATURE
An operating temperature is the temperature at which an
electrical or mechanical device operates. The device will
operate effectively within a specified temperature range which
varies based on the device function and application context,
and ranges from the minimum operating temperature to
the maximum operating temperature (or peak operating
temperature). Outside this range of safe operating
temperatures the device may fail.
CHECK ALL CERTIFICATES
All newest certificates may be found in our Wiki2.
2
wiki.teltonika-gps.com/view/FMB001_Certification_%26_Approvals
For more information, see the ANATEL
website www.anatel.gov.br
This equipment is not entitled to protection
against harmful interference and must not
00647-20-08591
cause interference in duly authorized
systems.
Quick Manual v1.6 // FMB001
17
WARRANTY
We guarantee our products 24-month warranty1 period.
All batteries carry a 6-month warranty period.
Post-warranty repair service for products is not provided.
If a product stops operating within this specific warranty time, the product can be:
•
Repaired
•
Replaced with a new product
•
Replaced with an equivalent repaired product fulfilling the same functionality
•
Replaced with a different product fulfilling the same functionality in case of EOL for the original product
1
Additional agreement for an extended warranty period can be agreed upon separately.
WARRANTY DISCLAIMER
•
Customers are only allowed to return products as a result of the product being defective, due to order assembly or
manufacturing fault.
•
Products are intended to be used by personnel with training and experience.
•
Warranty does not cover defects or malfunctions caused by accidents, misuse, abuse, catastrophes, improper maintenance
or inadequate installation – not following operating instructions (including failure to heed warnings) or use with equipment
with which it is not intended to be used.
•
Warranty does not apply to any consequential damages.
•
Warranty is not applicable for supplementary product equipment (i. e. PSU, power cables, antennas) unless the accessory is
defective on arrival.
•
More information on what is RMA1
1
wiki.teltonika-gps.com/view/RMA_guidelines
Quick Manual v1.6 // FMB001
18