nanobebe Bottle How To Use

nanobebe Bottle How To Use

The nanobebe Bottle is a innovative feeding solution designed for easy assembly, leak-proof feeding, and convenient storage. It features a unique push-in design for secure assembly, a silicone ring for added leak prevention, and a travel & storage cap for on-the-go convenience. The bottle can be used for breast milk or formula and is compatible with various pumping systems.

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

nanobebe Bottle How To Use - Manual & Instructions | Manualzz
How to Use
Your nanobébé
Bottle
Step 1
Step 2
Remove storage cap or nipple/
teat prior to assembling the bottle.
Simply push the bottle body
into the base (do not attempt to twist
shut).
PUSH ALL THE WAY IN
Step 3
Step 4
Hold this way to feed
Hold the bottle between
your fingers and thumb.
Preventing leaks
Make sure all edges are
evenly aligned and flush tight.
To disassemble
push down on
the lip.
Make sure all parts are DRY AND OIL FREE
FOR YOUR CHILD’S SAFETY AND HEALTH
WARNING! Always use this product with adult supervision . • Never use feeding nipple/teat as
a pacifier/soother. • Continuous and prolonged sucking of fluids will cause tooth decay. • Do
not heat on the stovetop. Do not place in a heated oven. • Always check food temperature
before feeding. • When using formula, follow the formula milk manufacturer’s instructions
and allow the freshly boiled water to cool before pouring into the bottle. • To ensure the
bottle functions correctly and to prevent leakage, always ensure nipple/teat screw ring is
tightly and evenly closed and bottle body is flush with bottle base. • Expressed breastmilk
can be stored in sterilized nanobébé bottles in the refrigerator up to 48 hours (not in the
door) or the freezer for up to 3 months. Never refreeze breastmilk or add fresh breastmilk
to already frozen milk. • Always wash your hands thoroughly and ensure surfaces are clean
before contact with sterilized components. Do not place components directly on surfaces
that have been cleaned with antibacterial cleaning agents.
Maintenance
Before each use, inspect all items. Pull the nipple/teat in all directions. Throw away at
first signs of damage or weakness. • Do not leave a nipple/teat in direct sunlight or heat,
or leave in disinfectant (“sterilizing solution”) for longer than recommended, as this may
weaken the nipple/teat. • Do not store with or allow to come into contact with solvents
or harsh chemicals. • Keep all parts not in use out of reach of children. • For safety and
hygiene reasons we recommend that the nipple/teat be replaced at least every 2 months.
• Excessive concentration of detergents may eventually cause plastic components to
crack. • To save storage space, stack* two or more nanobébé feeding bottles sealed with
storage caps • If not in use for over a week, the nanobébé feeding bottle should be stored
disassembled.
*Breastmilk bottles only.
Visit nanobebe.com to learn more.
Customer service US: 1.800.403.0498
PUMPING AND STORING
21
Seal with storage cap and stack* bottles deep in refrigerator
or use adapter to pour into storage bag and freeze
3A
1
Travel & Storage Cap
included
nipple/teat
cover
nipple/teat
ring
body
base
• Before first use, disassemble all parts, wash in warm soapy water
100% Satisfaction Guarantee!
Contact us anytime at [email protected]
and rinse thoroughly. Sterilize all parts using nanobébé steam
sterilizer or boil for 5 minutes. Dishwasher safe - top rack only.
More from nanobébé
• It is recommended that the silicone ring, located on your bottle body,
be removed and cleaned after each use.
• After each use, sterilize using a nanobébé Microwave Steam Sterilizer
or in boiling water for 5 minutes.
• Do not sterilize nor heat the bottle on stove (gas or electric),
doing so will impact the bottle’s functionality.
Bottle Cooler & Travel Pack
Multi-layered insulated baby
bottle cooler.
Safely store and transport
breast milk for on-the-go parents!
FLEXY PACIFIER/SOOTHER
Flexy Pacifier/Soother
NEVER use boiling water
Warm bottle in warm tap water with nipple/teat ONLY
NEVER use travel & storage cap while warming
Extra-soft Nipple/teat
Lightweight & ergonomic
• One piece silicone construction
• Adheres to the American Academy of Pediatrics’ guidelines for newborns
• Nipple/teat specially designed to promote healthy oral development
Suitable for sterilization in the nanobébé Microwave Steam Sterilizer or boiling water for at least
5 minutes. After sterilization please allow nipple/teat to cool for at least 5 minutes and remove
any trapped water before use. For your child’s safety
With adult supervision’ baby may hold the bottle while feeding.
3B
1
Track pumping order
and save space
TO PREVENT SPILLS
Use this cap (not the nipple/teat) when
travelling with your nanobébé bottle.
silicon ring
FEEDING AND WARMING
Pump directly into bottle
For parents using our Stage 2 transition bottle or Wide-Neck
pumps, Adapters are available and sold separately.
1
CLEANING AND STERILIZING
• It is highly recommended to use the nanobebe smart warming bowl for warming our
nanobebe bottles (Sold separately) •
For your child’s safety WARNING! Do not tie pacifier/soother around child’s neck as it presents
a strangulation danger. In the event the pacifier/soother becomes lodged in the mouth, DO NOT
PANIC; it cannot be swallowed and is designed to cope with such an event. Remove from the
mouth with care, as gently as possible. Always use this product under adult supervision. Do
not leave a pacifier/soother in direct sunlight or near a source of heat, or leave in disinfectant
(sterilizing solution) for longer than recommended, as this may weaken the nipple/teat. Never dip
nipple/teat in sweet substances or medication, your child may get tooth decay. Before first use,
place in boiling water for 5 minutes (may cause slight color change), allow to cool and squeeze
out any trapped water from the pacifier/soother. This is to ensure hygiene. Clean before each
use. The pacifier/soother can be cleaned by washing with warm water. DO NOT use abrasive
cleaning agents or antibacterial cleaners on the pacifiers/soothers. Excessive combinations of
detergents may eventually cause components to crack. Should this occur, replace your pacifier/
soother immediately. Wash your hands thoroughly and ensure surfaces are clean before contact
with sterilized components.
WARNING: Please check the nipple/teat before use by pulling. Throw away at the first signs of
damage or weakness. For safety and hygiene replace the pacifier/soother after 4 weeks of use.
* The nanobébé Flexy pacifier/soother is included in both our Starter Set and the Newborn Gift Set.
* While not included in the single or triple bottle packages, our award winning flexy pacifier/
soother is available and sold separately.
G10-00333-19-5

advertisement

Key Features

  • Push-in assembly
  • Leak-proof design
  • Travel & storage cap
  • Breast milk & formula compatible
  • Various pump compatibility
  • Microwave steam sterilizable
  • Dishwasher safe - top rack
  • Stackable storage

Frequently Answers and Questions

How do I assemble the nanobebe Bottle?
Simply push the bottle body into the base. Ensure all edges are evenly aligned and flush tight.
What is the recommended way to sterilize the nanobebe Bottle?
Use the nanobebe Microwave Steam Sterilizer or boil for 5 minutes.
How do I prevent leaks?
Make sure all edges are evenly aligned and flush tight. The silicone ring helps ensure leak-proof feeding.

Related manuals

Download PDF

advertisement