XULT Fitness 24 WISSOTA XT-24-RG Assembly Manual

DESCRIPTION:
24' WISSOTA
ASSEMBLY GUIDE
MODEL:
XT-24-RG
E
SEE MEDICINE BALL SHELF
ASSEMBLY GUIDE
J
SEE DB/KB SHELF ASSEMBLY GUIDE
70" KETTLEBELL SHELF
HORIZONTAL MOUNTING
B
SEE 4' CHIN BAR
ASSEMBLY GUIDE
12X
2X
F
2X
SEE 2' SUPPORT PAIR
ASSEMBLY GUIDE
6X
C
G
E
A
23X
D UPRIGHT W/SERIAL #
LEFT FRONT
DRAWING NAME: XT-24-RG
2X
SEE BUMPER PLATE
ASSEMBLY GUIDE
8X
J-CUP PAIR
6X
SEE DB/KB SHELF ASSEMBLY GUIDE
70" DUMBBELL SHELF
ANGLED MOUNTING
2X
ITEM
PART
NO. NUMBER DESCRIPTION
SAFETY BAR A
XR03 XULT;RIG;UPRIGHT 9FT W/MTG HW
PAIR
B
XR01 XULT;RIG 4' CHIN BAR
C
XR02 XULT;RIG 6' CHIN BAR
D
XR03S XULT;RIG;UPRIGHT 9FT W/SERIAL#/MTG HW
E
XS06
XULT;SHELF;DB/KB 70" W/MTG
F
XR04 XULT;RIG 2' SUPPORT PAIR
G
XR11 XULT; J-CUP SET (RIGHT & LEFT)
H
XR12 XULT;SAFETY BAR SET (RIGHT & LEFT)
J
XS02
XT;SHELF;MED BALL 70" W/MTG
K
XS08
XULT;RIG BP STACKER 70" W/MTG HW
H
K
SEE 6' CHIN BAR
ASSEMBLY GUIDE
6X
QTY.
23
12
8
1
4
6
6
6
2
2
LAST UPDATED: 2017.DEC.04
DESCRIPTION:
ASSEMBLY GUIDE
2' SUPPORT (PAIR)
MODEL:
XR04
TOOLS NEEDED: 3/4" WRENCHES X 2.
TORQUE SCREWS TO 57 ft-lbs
SUPPORT (PAIR)
ASSEMBLE WITH HARDWARE PROVIDED WITH UPRIGHTS
(EXPLODED VIEW SHOWN FOR REFERENCE ONLY)
USE 2nd MOUNTING
HOLE IN UPRIGHT
NUT;NYLOCK
0.500"-13
8 PLACES
UPRIGHT
WASHER;FLAT
0.500"
16 PLACES
UPRIGHT
SCREW;HEX HEAD
0.500-13
8 PLACES
DRAWING NAME: XR04 ASSY GUIDE
LAST UPDATED: 2017.OCT.19
DESCRIPTION:
CHIN BAR (4' & 6')
ASSEMBLY GUIDE
MODEL:
XR01 & XR02
4' CHIN BAR
TOOLS NEEDED: 3/4" WRENCHES X 2.
TORQUE SCREWS TO 57 ft-lbs
ASSEMBLE WITH HARDWARE PROVIDED WITH UPRIGHTS
(EXPLODED VIEW SHOWN FOR REFERENCE ONLY)
6' CHIN BAR
(SHOWN IN EXPLODED VIEW)
CHIN BAR MOUNTING
2ND HOLE LOCATION
NUT;NYLOCK 0.500"-13
4 PLACES
WASHER;FLAT 0.500"
8 PLACES
UPRIGHT
UPRIGHT
SCREW;HEX HEAD 0.500-13
4 PLACES
DRAWING NAME: XR01 & XR02 ASSY GUIDE
LAST UPDATED: 2017.OCT.19
DESCRIPTION:
SHELF MOUNTING HEIGHT
ASSEMBLY GUIDE
MODEL:
XS-SHELF SERIES
TOP SHELF
MEDICINE BALLS
SUGGESTED
MOUNTING
LOCATION
HORIZONTAL
SHELF
SECOND SHELF
KETTLEBELLS
THIRD SHELF
DUMBBELLS
SUGGESTED
MOUNTING
LOCATION
SUGGESTED
MOUNTING
LOCATION
HORIZONTAL
SHELF
ANGLED
SHELF
ANGLED
SHELF
DRAWING NAME: XULT XS-SHELF SERIES MOUNTING HEIGHT ASSY GUIDE.
LAST UPDATED: 2017.NOV.02
DESCRIPTION:
ASSEMBLY GUIDE
MEDICINE BALL SHELF
MODEL:
XS01 & XS02
TOOLS NEEDED: 3/4" WRENCHES X 2.
1 1/2" WRENCHES X2.
TORQUE SCREWS TO 57 ft-lbs
MEDICINE BALL 42" SHELF
W/MTG
ASSEMBLE WITH PROVIDED BRACKET AND HARDWARE
(EXPLODED VIEW SHOWN BELOW FOR REFERENCE ONLY)
MEDICINE BALL 70" SHELF
W/MTG
SEE STORAGE
BRACKET
ASSEMBLY GUIDE
UPRIGHT
SEE STORAGE BRACKET
ASSEMBLY GUIDE
HORIZONTAL MOUNTING
UPRIGHT
SHELF FRONT WITH DECAL
DRAWING NAME: XS01 & XS02 ASSY GUIDE
LAST UPDATED: 2017.OCT.25
DESCRIPTION:
ASSEMBLY GUIDE
DUMBBELL/KETTLEBELL SHELF
MODEL:
XS05 & XS06
TOOLS NEEDED: 3/4" WRENCHES X 2.
1 1/2" WRENCHES X2.
TORQUE SCREWS TO 57 ft-lbs
DUMBBELL/KETTLEBELL
42" SHELF W/MTG
ASSEMBLE WITH PROVIDED BRACKET AND HARDWARE
(EXPLODED VIEW SHOWN BELOW FOR REFERENCE ONLY)
DUMBBELL/KETTLEBELL
70" SHELF W/MTG
DUMBBELL SHELF
ANGLED SHELF
MOUNTING
SEE STORAGE BRACKET
ASSEMBLY GUIDE
ANGLED MOUNTING
SEE STORAGE BRACKET
ASSEMBLY GUIDE
HORIZONTAL MOUNTING
ANGLED MOUNTING
SHELF FRONT WITH DECAL
UPRIGHT
DRAWING NAME: XS05 & XS06 ASSY GUIDE
KETTLEBELL SHELF
HORIZONTAL MOUNTING
UPRIGHT
HORIZONTAL MOUNTING
SHELF FRONT WITH DECAL
UPRIGHT
UPRIGHT
LAST UPDATED: 2017.OCT.25
DESCRIPTION:
BUMPER PLATE STACKER
ASSEMBLY GUIDE
MODEL:
XS07 & XS08
TOOLS NEEDED: 3/4" WRENCHES X 2.
TORQUE SCREWS TO 57 ft-lbs
HARDWARE FOR ASSEMBLY INCLUDED
(EXPLODED VIEW SHOWN BELOW FOR REFERENCE ONLY)
BP STACKER 42"
W/MOUNTING
HARDWARE
SCREW;HEX HEAD 0.500-13
4 PLACES
WASHER;FLAT 0.500"
4 PLACES
UPRIGHT
NUT;NYLOCK
0.500"-13
2 PLACES
BP STACKER 70"
W/MOUNTING
HARDWARE
UPRIGHT
MOUNTING
LOCATION
SUPPORTED
BY FLOOR
DRAWING NAME: XS07 & XS08 ASSY GUIDE
LAST UPDATED: 2017.OCT.25
PROPER USAGE
1. Do not exceed weight limits of the exercise device.
2. If applicable, set safety stops to appropriate height.
3. Exercise using no more weight than you can safely lift and control.
4. In a controlled manner, perform exercise.
5. Return weight to its fully-supported start position.
IMPORTANT SAFETY INFORMATION
It is the sole responsibility of the purchaser of Xult products to instruct all individuals, whether they are the end user or supervising personnel on
proper usage of the equipment.
It is recommended that all users of Xult exercise equipment be informed of the following information prior to its use.
Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that Xult equipment be used
properly to avoid injury.
INSTALLATION
• STABLE AND LEVEL SURFACE: Xult exercise equipment must be installed on a stable base and properly leveled.
• SECURING EQUIPMENT: Manufacturer recommends that all stationary Xult strength equipment be secured to the floor to stabilize equipment
and eliminate rocking or tipping over. This must be performed by a licensed contractor. All floor anchor points must be able to withstand 750
lbs. (3.3 kN) pull-out force. All wall anchor points must be able to withstand a minimum pull-out force of 2.2 kN (500 LBS) from the walls
MAINTENANCE
• DO NOT use any equipment that is damaged and or has worn or broken parts.
• MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason.
• MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping your liability to a
minimum. Equipment needs to be inspected at regular intervals.
• Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so.
Maintenance Checklist
Product Specifications
Action
Frequency
Tech Specs
Inspect Hardware
Monthly
Max User Weight
136 kg / 300 lbs
Frame
10 years
Inspect Frame
Bi-Annually
Max Training Weight
318 kg / 700 lbs
Finish
5 years
Clean Machine
As needed
Dimensions (L x D x H)
286.6" x 180" x 108.25"
Accessories
3 years
Product Weight
918 kg / 2019 lbs
Labor
1 year
Warranty
XULTFITNESS.COM
WARNING
DEATH OR SERIOUS INJURY CAN OCCUR ON THIS EQUIPMENT. FOLLOW THESE PRECAUTIONS TO
AVOID INJURY!
1. Keep children under the age of 14 away from this strength training equipment. Teenagers must be
supervised at all times while using this equipment.
2. This equipment is not intended for use by persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the equipment by a person responsible for their safety.
3. All warnings and instructions should be read and proper instruction obtained prior to use. Use this
equipment for its intended purpose ONLY.
4. Inspect the machine before use. DO NOT use machine if it appears damaged or inoperable.
5. Do not exceed weight capacity of this equipment.
6. ALWAYS use a spotter if using free weights.
7. Balance the weight applied to this equipment and/or any barbell. Where applicable, use retention
devices to retain weight discs.
8. Injuries to health may result from incorrect or excessive training. Cease exercise if you feel faint or
dizzy. Obtain a medical exam before beginning an exercise program.
9. Keep body, clothing, hair, and fitness accessories free and clear of all moving parts.
10. Do not allow the lifting bar to drop suddenly.
11. Adjustable stops must be used at all times.
12. ALWAYS set both adjustable stops to the same height when using this machine.
13. Visually ensure lifting bar catches are fully engaged and seated in the hooks before releasing the
load and exiting the machine.
14. PROPER adjustable stop height depends on the exercise performed. Adjust as follows:
• Remove weight from lifting bar.
• For squats, perform the exercise and determine the lowest comfortable position of the bar that
ensures no spinal compression. For other exercises, perform the movement and determine the
lowest point of bar travel that is comfortable without the bar contacting your body.
• Position both stop catches to stop the bar at this point. Ensure that they are fully engaged.
• Load weights onto the lifting bar and carefully perform the exercise.
15. Manufacturer requires this equipment to be secured to the floor to stabilize and eliminate rocking
or tipping over. Use a licensed contractor.
XULTFITNESS.COM