Digitus DA-90435 Electrically Height-Adjustable Table Frame, dual motor, 3 levels, gray Owner's Manual

Electrically Height-Adjustable Desk Frame
Frame Assembling and Display Manual
DA-90433 / DA-90434 / DA-90435
1. Overview ...................................................................................................2
2. Technical Features .....................................................................................2
3. Package content ........................................................................................4
4. Component list ..........................................................................................4
Step 1: Install the supporting beam and the side bracket: ................................................. 6
Step 2: Install the lifting column: ......................................................................................... 6
Step 3: Install the feet:......................................................................................................... 7
Step 4: Install the adapter arm: ........................................................................................... 7
Step 5: Install the tabletop, handset, control box and adapter: ......................................... 8
Step 6: Connect cables to the control box: ......................................................................... 8
5. Operating unit ...........................................................................................9
Product Outline.................................................................................................................... 9
Product Specification ........................................................................................................... 9
Operating Instructions ....................................................................................................... 10
6. Important Safety & Usage Instructions .................................................... 11
Waste Disposal .................................................................................................................. 13
1. Overview
With this electric height-adjustable table frame you can easily convert your desk
into an ergonomic sit/stand workstation. Save the cost and hassle of finding a
height-adjustable desktop and just use the DIGITUS® electrically heightadjustable table frame instead. This set is suitable for all tabletops between 110
and 200 cm in width and 60 to 100 cm in depth. 4 different heights can be
programmed and saved using the touch display. The frame allows height
adjustment from 62-127 cm. The lifting speed is 35 mm/sec. The anti-collision
function automatically stops the table when hitting obstacles during up and
down movement. The anti-collision function can be set to 3 different sensitivity
levels. The frame can lift a maximum load of 100 kg and is equipped with a
display lock / child lock for the control panel. Improve your health and prevent
postural damage and impairments of the musculoskeletal system!
2. Technical Features
Maximum load capacity
Up to 100kg
Convenient electrical height adjustment 62-127 cm
(without tabletop)
2
Weight
Color
28,3 kg
DA-90433: White
DA-90434: Black
DA-90435: Grey
Euro, plug (type C, CEE 7/16)
– C7, device socket, length: 3 m
Rectangular
3
620-1270 mm (without tabletop)
1100-1700
Power supply letter
Shape
Column Stage
Height Range
Width Range
3
3. Package content
• Electrically Height-Adjustable Table Frame
• Manual
• Mounting material
A
B
C
4x M6
8x M6
D
E
6x St 4.2
8x M6
F
6x Cable tie
16x St 4.2
G
1x Allen Key
4 x 4 mm
Attention: The drawings are for guidance only and they may differ slightly
from the product and fittings received. Please contact our customer service
department if you have any questions.
4. Component list
(1)
(2)
2x Feet
2x Lifting Column
(3)
(4)
2x Connection rod
2x Left Supporting Beam
(5)
(6)
2x Right Supporting Beam
2x Side bracket
(7)
(8)
1x Adapter arm
1x Adapter
4
(9)
(10)
1x Control Box
1x Handset
(11)
(12)
1x Adapter cable
1x Power plug
5
Step 1: Install the supporting beam and the side bracket:
Tighten it
• If the connecting rod cannot be inserted into the supporting beam, please
loosen the screws on the beam
• Using screws (A) to connect to the connection rod (3) with the left
supporting beam (4) and the right supporting beam (5), and tighten them
with the allen key (G)
• Using screws (A) to connect the side bracket (6) with the left supporting
beam, (4) and right supporting beam (5), and tighten with the allen key (G)
Step 2: Install the lifting column:
• Using screws (B) to connect the lifting column (2) with the left supporting
beam (4) and the right supporting beam (5), and tighten them with the allen
key (G)
6
Step 3: Install the feet:
• Connect the feet (1) and the lifting column (2) with screws (C) and tighten
them with the allen key (G)
Step 4: Install the adapter arm:
The expansion of supporting
beam cannot exceed this hole.
Loosen
Adjust
Tighten
• The expansion distance of the supporting beam can be adjusted according
to the actual use.
• Buckle the adapter arm (7) into the left supporting beam before open the
tabletop (4).
7
Step 5: Install the tabletop, handset, control box and adapter:
Insert
• Fix the tabletop with screws (F), and then to fix the control box (9) on the
tabletop with screws (F). The handset (10) is fixed on the tabletop with selfowned screw and insert the adapter into the adapter arm.
Step 6: Connect cables to the control box:
Tear off
Manage cables
Fix cables
• Fix the cables to the tabletop with cable management (E), and then use
screw (D) to fix the cable management (E) to keep the desk cables
organized.
8
Port for adapter
cable
Port for
Headset
Port for cable
connected
to the lifting
column
5. Operating unit
Product Outline
LED Display
Product Specification
Button introduction:
There are seven buttons that "▲", "▼", "1", "2", " ", " ", "M"
(1) "▲": Adjust the desk upwards
(2) "▼": Adjust the desk downwards
(3) "1": Position 1, first height position saved by the user
(4) "2": Position 2, second height position saved by the user
(5) " ": the display shows “3”, which means the position of the standing
height the user saved.
(6) " ": the display shows “4”, which means the position of the standing
height the user saved.
(7) "M": Height saving button, for height memory function;
Child lock: for security
9
Operating Instructions
• Child/Key lock function:
a. When the child lock is turned on, the child lock blue indicator light
(﹀ and M directly above) lights up
b. Press the button indicator to flash once
c. To unlock or activate the child lock, you need to press and hold the M
button for about 5 seconds.
d. Only when the child lock is unlocked, all the buttons can work normally.
• Height Adjustable Function:
Press the"▲" or "▼" button to adjust the height.
The LED display shows the current height.
• Height Memory Function:
a. Press UP or DOWN button and adjust the height to the
desired height. Press "M" to save the height, and the screen
will display " ";
Press "1", "2", or " ", " " then, that is, save the height to
the corresponding position 1 or 2 3, or 4, which will show in the display
screen as "
", "
", or "
", or "
";
b. Press "1", "2" and " ", " " button directly to automatically
adjust the memory height you saved.
• Anti-collision sensitivity adjustment - optional features:
a. Press and hold the “▲” “▼” button for 5 seconds at the same time to
switch the sensitivity. Switch one file for 1 time and divide it into 4 files
(A-3, A-2, A-1, A-0);
b. The display shows “
”, the anti-collision function is off; the display
shows “
”, low sensitivity; Display shows “
”, medium sensitivity;
display shows “
”, high sensitivity;
c. During height adjustment, when tabletop comes in contact with
another object, it instantly stops and reverses to avoid damage.
d. Press and hold the “▲” “▼” button for 5 seconds at the same time.
If the display does not display the above code, there is no anti-collision
function.
10
• Troubleshooting:
a. Reset the system: When the LED shows "
" or "
", press “▼”
button and hold it until the desk reaches its lowest height and rebounds
(drives up a bit) - then stops and show the current height,
it means the reset has been successfully finished.
b. When it doesn’t work and the LED shows "E01" or "E02", please retry 18
mins later.
c. If the display unit shows an error message, but there is no response
during pressing “▼” button, please check the cable connections and
then cut off the power for at least
10 seconds. Reconnect to the power and then press “▼” button again to
start the reset process when it shows the "
" or
"
".
d. If the display unit didn’t show "
" or "
", please press "M" + " "
simultaneously for 3-5 seconds. You will hear two beeps (beep, beep),
then the system is ready to press “▼” to start the reset process.
e. If all these above processes are inefficient, please contact our customer
service.
6. Important Safety & Usage Instructions
• This appliance can be used by children aged from 8 years and above and
persons with reduced physic, sensory or metal capabilities or lack of
experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved
• Persons with reduced physical, mental abilities and or lack of experience
and knowledge must not use the product, unless they're under supervision,
understand the hazards involved or they have been thoroughly instructed in
the use of the apparatus by a person who is responsible for the safety of
these persons
• Children are forbidden to play on the product because of unforeseen
actions when playing, so any dangerous consequences caused by this
improper action will not be manufacturers. Children are forbidden to play
with the appliance at all.
• Be familiar with all functions and program settings of the product before
first use
• Check carefully to ensure correct and complete assembly before using
• Cleaning and user maintenance shall not be made by children without
supervision
11
• If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent, or a similarly qualified person in order to avoid a hazard
• Please make sure there is no hazard sources in your operating environment
e.g., do not litter the tools around. Always be careful to treat the packaging
materials to avoid any possible danger, e.g., plastic bag may lead to choking
hazard to children
• Keep the original package of the equipment, if necessary, in case of the
future use in transportation
• Power supply: AC 100 V – 240 V, 50 / 60 Hz
• Operating Temperature: 0 – 40°C
• Unplug the power plug before cleaning, wipe the dust off the surface with a
slight wet dishcloth, be careful do not let the drops into the internal parts
and do not lose the connector
• The electric box contains electronic components, metals plastics, wires etc.,
so dispose of it in accordance with each countries environmental legislation,
not the general household waste
• Slight noise caused by the V-ribbed belt or brake system due to structure
will not have any effect on the use of the equipment
• Corrosive or abrasive materials are forbidden to clean the equipment.
Must ensure that the cleaner used will not pollute the environment
• This appliance shall only be used together with the
included power supply unit. Every person who is responsible for this table
at installation or employment of the table in daily use or in service and
repair work should carefully read these instructions. Keep these instructions
close to your sit/stand table
• The table shall only be used as a working table with the possibility to
continuously adjust working height between sitting and standing position.
The table shall only be used indoors and in dry premises (office
environment or similar).
• The table must not be overloaded – maximum load is 100 kg
• The motors may be run continuously for maximum 2 minutes. Afterward,
the motors must stand by for approx. 18 minutes before they can
be used again
• Any failure to comply with the safety and installation instructions in this
manual may cause serious bodily injury
• Users should make sure that they never sit on the desktop in order to
prevent serious bodily injury
• Don't clean the product with water while the power is still connected
• Don't disassemble or replace components while the power is still connected
• Never operate the system with a damaged cord or plug
12
• Never operate the system if it's in moist environment or its electrical
components have contact with liquid
• Don't operate the system if the control box makes noise or odor.
Alterations of the given power unit and control box aren't allowed
• Clear up all obstacles within the height adjustment range
• Don't leave the cords or plug unorganized in order to prevent tripping
hazards
• Any attempts to reconstruct the desk frame aren't allowed
• Don't add anything to the adjustable junctions of the desk frame.
• Outdoor use is prohibited
• When the table is run up/down, keep the necessary safety distance to avoid
the risk to get squeezed between the moving table top and fixed objects in
the surrounding area.
• When the table is run up/down the user shall keep watch so that nobody is
injured or no object is damaged. The table top must not bump into a fixed
object so that the table is overturned. Always remove any office chair
before the table is run up/down
• Alterations to the control box are absolutely forbidden
• The table must not be used as a hoisting device for persons
Waste Disposal
This marking indicates that this product should not be disposed with
other household wastes. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources.
To return your used device, please use the return and collection
systems or contact the retailer where the product was purchased. They
can take this product for environmental safe recycling.
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity
is part of the shipping content. If the Declaration of Conformity is missing, you
can request it by post under the below mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid, Germany
13