JEGS 11115 Windshield Wiper Switch Installation Instructions

Jegs 11115 is a windshield wiper switch designed for use in vehicles. It provides multiple speeds for your windshield wipers, allowing you to adjust the speed depending on the weather conditions. This switch features a 'OFF' position terminal, which is important for safety considerations. The manual provides detailed instructions on the function and wiring for the switch, ensuring proper installation and operation.

PDF Download

Document

Installation Instructions for 11115
Windshield Wiper Switch
Terminal
B
W
1
2
3
Function / Wiring
Battery or 12V power source
Power or 12V side of washer motor
To high speed side of wiper motor
To low speed side of wiper motor
OFF / 12V
Switch Position
N/A
N/A
Two click fully clockwise
One click clockwise
Fully counterclockwise
WARNING! : When the switch is in the ‘OFF’ position terminal ‘3’ has 12 volts. DO NOT connect this terminal to any
other power source or ground!
1-800-345-4545 jegs.com
">

Hello! I am an AI chatbot specifically trained to assist you with the 11115 Windshield Wiper Switch Installation Instructions. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant terminated

Key features

Multiple wiper speeds
Off position terminal
12V power source
Detailed wiring diagram

Frequently asked questions

Terminal '3' is connected to the high speed side of the wiper motor. It receives 12 volts when the switch is in the 'high speed' position.

No, it is not safe to connect terminal '3' to other power sources or ground. When the switch is in the 'OFF' position, terminal '3' still has 12 volts. You should always follow the wiring diagram provided in the manual for safe operation.

The 'one click clockwise' position corresponds to the low speed of the wiper motor, while the 'two click fully clockwise' position corresponds to the high speed.