JEGS 90000-01 39 Ford Tail Light Installation Instructions

Jegs 90000-01 is a reproduction of the original 39 Ford Tail Light. It features a self-grounding design, an 1157 bulb for running/turn/brake light functions, and a lens cover plate for accessing the bulb. It's suitable for sheet metal mounting, and a wire can be run to the frame for plastic or fiberglass installation.

PDF

Document

Installation Instructions for 90000 &amp; 90001
’39 Ford Style Taillights
This item is an exact reproduction of the original 39 Ford Tail Light.
Wiring Diagram
•
•
•
White wire = Stop / Turn
Black wire = Taillight
The assembly is a self grounding unit assuming that it is mounted on sheet metal. If it is being mounted on
plastic or fiberglass you would simply run a wire from the mounting stud/bolt to the frame.
It includes an 1157 bulb. The bulb is a double filament running / turn / brake light.
If / when the bulb ever needs to be replaced; the lens cover plate needs to be very gently pried from the case as the
bulb is accessed from the front of the assembly and from behind the lens.
1-800-345-4545 jegs.com
">

Hello! I am an AI chatbot specifically trained to assist you with the Jegs 90000-01 Installation instructions. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts