JEGS 150052 & 53 90° Fuel Filter Installation Instructions

Jegs 150052 & 53 is a 90° fuel filter designed as a pre-filter, positioned between the fuel tank and fuel pump. It's crucial to mount the filter outlet below the tank pickup level for optimal performance. Ideally, install the assembly close to the tank in a ventilated area, avoiding moving parts and heat sources like exhaust systems. Ensure proper lubrication of threads and o-rings on port fittings before installation.

PDF

Document

Installation Instructions for 150052 &amp; 150053
90&deg; Fuel Filter
Installation Instructions:
NOTE: This fuel filter was designed as a pre-filter and is mounted between the fuel tank and fuel pump.
NOTE: The outlet of the fuel filter should be mounted at or below the level of the fuel tank pickup.
Mount the fuel filter/fuel pump assembly as close as possible to the fuel tank in a well ventilated area with minimal
exposure to road debris. Avoid exposing the pump and fuel lines to moving parts and hot surfaces, such as the exhaust
system.
NOTE: Increasing distance between the pump and tank will decrease pump efficiency.
NOTE: Always lubricate threads and o-ring on port fittings before installation.
Return Line
Fuel Tank
Fuel Pump
Fuel Filter
Fuel Filter Outlet
To Engine
Fuel Filter Inlet
Fuel Tank Pickup
Point
Fitting Kits Available from JEGS:
555-150045
555-150046
555-150047
555-150048
(2) 1/2” NPT Male x -08AN Hose &amp; (1) -08AN Female Swivel x 3/8” NPT Male
(2) 1/2” NPT Male x -10AN Hose &amp; (1) -10AN Female Swivel x 3/8” NPT Male
(2) 1/2” NPT Male x -10AN Hose &amp; (1) -10AN Female Swivel x 1/2” NPT Male
(2) 1/2” NPT Male x -10AN Hose &amp; (1) -10AN Swivel Coupler &amp; (1) -10 AN Port x -10AN Hose
1-800-345-4545 jegs.com
">

Hello! I am an AI chatbot specifically trained to assist you with the Jegs 150052 & 53 Installation instructions. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant is out of keyboard. Please, try again later.

Key features

Pre-filter
90° design
Fuel tank & pump installation
Outlet below tank pickup
Ventilated mounting
Avoid heat & moving parts
Lubricate threads & o-rings

Frequently asked questions

The fuel filter is designed to be mounted between the fuel tank and fuel pump. It should be installed in a well-ventilated area with minimal exposure to road debris. Avoid mounting near moving parts and hot surfaces, like the exhaust system.

Always lubricate the threads and o-ring on the port fittings before installation. The outlet of the fuel filter should be mounted at or below the level of the fuel tank pickup.

JEGS offers various fitting kits for this fuel filter. Refer to the document for specific details and part numbers. They include combinations of 1/2” NPT Male x -08AN Hose, -10AN Hose, and -10AN Female Swivel x 3/8” NPT Male or 1/2” NPT Male.