Vulcan-Hart | VECTS12 | F-31898

Item # __________________________
C.S.I. Section 11420
VEKT SERIES
ELECTRIC COUNTER KETTLE &
BRAISING PAN TABLE
■ VEKT26
■ VEKT50
■ VEKT64
1 kettle - 26"w x 24"d x 211/2"h.
2 kettles - 50"w x 24"d x 211/2"h.
2 kettles or 1 kettle & 1 braising pan 64"w x 24"d x 211/2"h.
■ VEKT80 3 kettles or 2 kettles & 1 braising pan 80"w x 24"d x 211/2"h.
Height dimensions to the top of the table.
■ Drain tray fits into the full length drain trough.
■ Kettle(s) are evenly spaced.
■ Dual temperature faucet, 12" swing spout, (1 for one or two
kettle, mixing valve on right front apron) (2 for three or four
kettles, mixing valves on left and right front apron).
Model VEKT64
■ One year limited parts and labor warranty.
OPTIONS
■ 6' flexible kettle filler with bracket, dual temperature with
bracket.
■ Front flange feet.
SPECIFICATIONS:
Electric counter kettle and counter braising pan table Vulcan-Hart
Model No. VEKT_____. Stainless steel top with marine edge on
sides and rear, drain trough, sides, front, legs, rear flange and
front bullet feet. Drain tray fits into the full length drain trough.
Kettle(s) and braising pan(s) are evenly spaced. Dual temperature faucet, 12" swing spout, (1 for one or two kettle, mixing valve
on right front apron) (2 for three or four kettles, mixing valves on
left and right front apron).
■ Correction facility package.
a. Security type tamper resistant fasteners with tack welds.
b. Controls protected by lockable cover.
■ Second year extended limited parts and labor warranty.
Classified by UL to NSF Std. #4. Meets ASME code.
F-31898 (10-03)
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. 1-800-814-2028
502-778-2791 QUOTE & ORDER FAX: 1-800-444-0602
MODELS: VEKT SERIES Electric Counter Kettle & Braising Pan Table
■ Electric counter kettle and braising pan table, stainless steel
top with marine edge on sides and rear, drain trough, sides,
front, legs, rear flange and front bullet feet.
A2780
ISO9001
Vulcan-Hart Co.
STANDARD FEATURES
VEKT SERIES
ELECTRIC COUNTER KETTLE &
BRAISING PAN TABLE
SERVICE CONNECTIONS:
A Electrical connections refer to appropriate spec sheet.
B Drain for waste.
C Water for swing faucet dual temperature, 3/8" IPS.
BRIMFUL CAPACITIES PER EACH KETTLE/BRAISING PAN:
Gallons
Quarts
Liters
4 oz. servings
NOTE:
• Dimensions which locate the above connections have a tolerance of
+ or - 3" (+ or - 75 mm).
• Installation of backflow preventers, vacuum breakers and other
specific code requirements is the responsibility of the owner and
installer. It is the responsibility of the owner and installer to comply with
local codes.
6
24
23
392
10
40
38
320
12
48
45
384
16
64
61
512
Working capacity 70 to 80% of brimful depending on model.
IMPORTANT:
1. This appliance is manufactured for commercial installation only and is
not intended for home use.
2. Refer to the appropriate spec sheet for a list of options and accessories:
Model VEC6, 10 & 12 - F-31672
Model VECTS12 - F-31687
Model VECTS16 - F-32279
BRAISING PAN AND KETTLE POSITION CHART
TABLE SIZE: (26") (50") (64") (80")
VEC6
A
B
C
D
301/4
451/4
507/8
241/8
1
VEC10
31 /2
1
1
46 /4
1
1
22 /2
1
241/2
53 /2
VEC12
33 /2
48 /4
53 /2
VECTS12
303/8
401/2
54
VECTS16
363/8
433/8
56
1
Kettle
Position A
6 gallon
10 gallon
12 gallon
Kettle
Position B
6 gallon
10 gallon
12 gallon
Kettle
Position C
6 gallon
10 gallon
12 gallon
Br. Pan
Position A
12 gallon
16 gallon
Br. Pan
Position B
12 gallon
16 gallon
Br. Pan
Position C
12 gallon
16 gallon
Verify configuration and sizing with your Vulcan-Hart
Representative.
NOTE: In line with its policy to continually improve its products, Vulcan-Hart Company reserves the right to change materials and
specifications without notice.
F-31898 (10-03)
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. 1-800-814-2028
502-778-2791 QUOTE & ORDER FAX: 1-800-444-0602
Printed On Recycled Paper
Download PDF