Cisco | MGBSX1 | Cisco MGBBX1, MFEBX1, MGBLX1, MFEFX1

Package Contents
Quick Start Guide
STEP 2 Remove the mini-GBIC SFP module’s rubber port cap.
• Mini-GBIC SFP Transceiver
STEP 4 Connect the other end of the cable to an SFP module to verify that the
fiber connection is complete.
• Quick Start Guide
1
WARNING: Optical SFPs use a small laser to generate the fiber-optic
signal. Because invisible laser radiation may be emitted
from the aperture of the port when no fiber cable is
connected, avoid exposure to laser radiation and do not
stare into open apertures. Keep the optical transmit and
receive ports covered whenever a cable is not connected
to the port.
WARNING: Optical SFPs use a small laser to generate the fiber-optic
signal. Because invisible laser radiation may be emitted
from the aperture of the port when no fiber cable is
connected, avoid exposure to laser radiation and do not
stare into open apertures. Keep the optical transmit and
receive ports covered whenever a cable is not connected
to the port.
Cisco Small Business
MGBBX1 1000 Base-BX Mini-GBIC SFP Transceiver
MFEBX1 100 Base-BX Mini-GBIC SFP Transceiver
MGBLX1 1000 Base-LX Mini-GBIC SFP Transceiver
STEP 1 Insert the mini-GBIC SFP module with the printed side up and the
rubber port cap facing out.
STEP 3 Connect the fiber cable’s LC connector to the mini-GBIC SFP module’s
port.
For the Cisco MGBBX1, use the Cisco GLC-BX-D as the downstream SFP. For
the Cisco MFEBX1, use the Cisco GLC-FE-100BX-D as the downstream SFP.
The Cisco MGBBX1 and the Cisco MFEBBX1 support upstream only.
Connecting the Cisco MGBT1
WARNING: Optical SFPs use a small laser to generate the fiber-optic
signal. Because invisible laser radiation may be emitted
from the aperture of the port when no fiber cable is
connected, avoid exposure to laser radiation and do not
stare into open apertures. Keep the optical transmit and
receive ports covered whenever a cable is not connected
to the port.
MFEFX1 100BASE-FX Mini-GBIC SFP Transceiver
MFELX1 100BASE-LX Mini-GBIC SFP Transceiver
MGBSX1 Gigabit SX Mini-GBIC SFP Transceiver
MGBLH1 Gigabit LH Mini-GBIC SFP Transceiver
MGBT1 Gigabit 1000 Base-T Mini-GBIC SFP Transceiver
Removing the Transceiver
Removing the Cisco MGBBX1, MFEBX1, MGBLX1,
MFEFX1, MFELX1, MGBSX1, and MGBLH1
Connecting the Transceiver
Connecting the Cisco MGBBX1, MFEBX1, MGBLX1,
MFEFX1, MFELX1, MGBSX1, and MGBLH1
2
STEP 1 Insert the gigabit SFP module with the printed side up and the pull tab
facing out.
STEP 2 Lock the gigabit SFP module in place.
STEP 3 Connect the cable to the gigabit SFP Module’s port.
STEP 4 Connect the other end of the cable to the switch.
STEP 1 Press the fiber cable’s connector and pull to remove the fiber cable
from the mini-GBIC SFP module.
STEP 2 Pull the module’s bail latch down.
STEP 3 Remove the mini-GBIC SFP module.
STEP 1 Press the RJ-45 connector’s tab and pull to remove the cable from the
gigabit SFP module.
STEP 2 To remove the gigabit SFP module, begin by pulling the module’s pull
tab.
STEP 3 Remove the Gigabit SFP Module.
3
Switch Compatibility List
Cisco 100M SFP Switch Support and Minimum
Software Release Requirements
Removing the Cisco MGBT1
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Cisco, Cisco Systems, the Cisco logo, and the Cisco Systems logo are registered trademarks or
trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other
countries. All other trademarks mentioned in this document or Website are the property of their
respective owners. The use of the word partner does not imply a partnership relationship between
Cisco and any other company. (0705R)
© 2009 Cisco Systems, Inc. All rights reserved.
Printed in the USA on recycled paper containing 10% postconsumer waste.
78-18990-01
WARNING: Optical SFPs use a small laser to generate the fiber-optic
signal. Because invisible laser radiation may be emitted
from the aperture of the port when no fiber cable is
connected, avoid exposure to laser radiation and do not
stare into open apertures. Keep the optical transmit and
receive ports covered whenever a cable is not connected
to the port.
Switch Model Number
SR224G
SR2024C
SR2024
SPS208G
SPS224G4
SPS2024
SRW208G
SRW208L
SRW208P
SRW208MP
SRW2008
SRW2008P
SRW2008MP
SRW224G4
SRW248G4
SRW224G4P
SRW248G4P
SRW2024P
SRW2016
MFEBX1/MFEFX1/MFELX1
Not supported
Not supported
Not supported
1.0.2
1.0.2
1.0.2
1.0.3
1.0.3
1.0.3
1.0.3
1.0.3
1.0.3
1.0.3
1.2.2*
1.2.2*
1.0.1
1.0.1
1.0.3
Not supported
SRW2024
SRW2048
SRW224P
SFE2000
SFE2000P
SGE2000
SGE2000P
SFE2010
SGE2010
SFE2010P
SGE2010P
SLM224G2-CN
SLM224G
SLM248G
SLM224P
SLM248Pb
SLM2024
SLM2048
SLM224G4S
SLM224G4PS
SLM248G4S
SLM248G4PS
Not supported
Not supported
Not supported
Not supported
Not supported
Not supported
Not supported
2.0.1.80
2.0.1.75
2.0.1.80
2.0.1.75
1.0.2*
1.0.1
1.0.1
1.0.1
1.0.1
1.0.1
1.0.1
1.0.2
1.0.2
1.0.2
1.0.2
* Requires manual configuration for the 100M SFP. See the following section.
Manually Configuring the 100M SFP
STEP 1 On the Port Configuration page, click Detail.
STEP 2 In the Port Configuration popup window, select eth 100M in the SFP
Speed field.
STEP 3 Save your changes.
STEP 4 Insert the 100M SFP module.
4
Where to Go from Here
Resource
Technical
Documentation
Customer Support
Open Source
License Notices
Regulatory
Compliance and
Safety Information
Warranty
Information
Cisco Partner
Central site for Small
Business
Location
http://www.cisco.com/en/US/products/ps9934/
tsd_products_support_series_home.html
www.cisco.com/en/US/support/
tsd_cisco_small_business_support_center_contacts.
html
www.cisco.com/go/osln
http://www.cisco.com/en/US/products/ps9934/
tsd_products_support_series_home.html
http://www.cisco.com/go/warranty
http://www.cisco.com/web/partners/sell/smb
Download PDF