VTech | CS6449 | User`s manual | VTech CS6449 User`s manual

User’s manual
Accessory handset for
use with VTech model
CS6449
www.vtechcanada.com
Model: CS6400
Congratulations
on purchasing your new VTech product. Before using this
telephone, please read Important safety instructions on
pages 9-10 of this manual.
This manual has instructions on how to set up and register your
new handset. For complete instructions on using the handset, see
the user’s manual provided with your telephone base.
If you cannot find your user’s manual, you can view or download it
at www.vtechcanada.com.
The ENERGY STAR® program (www.energystar.gov)
recognizes and encourages the use of products that save
energy and help protect our environment. We are proud
to mark this product with the ENERGY STAR® label
indicating it meets the latest energy efficiency guidelines.
Compatible with
Hearing Aid T-Coil
T
TIA-1083
Telephones identified with this logo have reduced noise and
interference when used with most T-coil equipped hearing
aids and cochlear implants. The TIA-1083 Compliant Logo is
a trademark of the Telecommunications Industry Association.
Used under license.
Table of contents
Getting started...........................................................................1
Parts checklist.............................................................................1
Battery installation.......................................................................2
Battery charging..........................................................................3
Add and register a handset.........................................................4
Deregister handsets....................................................................5
Handset layout............................................................................6
Appendix....................................................................................8
Battery.........................................................................................8
Important safety instructions.......................................................9
Precautions for users of implanted cardiac pacemakers...........11
Operating range........................................................................11
Maintenance..............................................................................12
About cordless telephones........................................................13
®
The RBRC seal........................................................................14
FCC, ACTA and IC regulations.................................................15
Limited warranty........................................................................18
Technical specifications............................................................21
Getting started
Parts checklist
Your telephone package contains the following items. Save your
sales receipt and original packaging in case it is necessary to ship
your telephone for warranty service.
Handset
Battery compartment cover
Battery
User’s manual
User’s manual
Handset charger
and charger adapter
To purchase a replacement battery or power adapter, visit our
website at www.vtechcanada.com or call 1 (800) 267-7377.
Getting started
Battery installation
Install the battery as shown below.
1. Plug the battery connector securely into the socket inside the
handset battery compartment, matching the color-coded label.
2. Place the battery with the label THIS SIDE UP facing up and
the wires inside the battery compartment.
3. Align the cover flat against the battery compartment, then slide
it towards the center of the handset until it clicks into place.
4. Charge the handset by placing it in the handset charger. The
CHARGE light is on when the handset is charging.
1
2
3
4
CHARGE light
remains on when
charging.
•
If the handset will not be used for a long time, disconnect and
remove the battery to prevent possible leakage.
•
To purchase a replacement battery, visit our website at
www.vtechcanada.com or call 1 (800) 267-7377.
Getting started
Battery charging
Once you have installed the battery, the screen indicates the
battery status (see the table below). If necessary, place the
handset in the handset charger to charge the battery. For best
performance, keep the handset in the handset charger when not
in use. The battery is fully charged after 11 hours of continuous
charging. See the table on page 8 for battery operating times.
If the screen is blank or displays Place in charger, you need to
charge the handset without interruption for at least 30 minutes to
give the handset enough charge to use the telephone for a short
time. When the battery is low, the handset displays Low battery
along with a flashing icon. If you are on a call in low battery
mode, the handset plays short beeps to alert you.
The following table summarizes the battery charge indicators and
actions to take.
Battery indicators
Battery status
Action
The screen is blank,
or displays Place in
charger and
flashes.
Battery has no or
very little charge. The
handset cannot be used.
Charge without
interruption (about
30 minutes).
The screen displays
Low battery and
flashes.
Battery has enough
charge to be used for a
short time.
Charge without
interruption (about
30 minutes).
The screen displays
HANDSET X.
Battery is charged.
To keep the battery
charged, place it in the
handset charger when
not in use.
If you place the handset in the handset charger without installing a
battery, the screen displays No battery.
Getting started
Add and register a handset
You can add new handsets (CS6400, purchased separately) to
your telephone base. Each handset must be registered to the
telephone base before use.
When first purchased, each expansion handset alternately shows
1.Press FIND HS on base 4sec and 2.Then press # on handset.
The new handset should be charged without interruption for at
least 30 minutes before registering it to the telephone base. For
more details on battery charging, see page 3.
To register a handset:
1. Make sure the handset is out of the handset
charger and is put near the telephone base.
Make sure the handset alternately shows
1.Press FIND HS on base 4sec and
2.Then press # on handset before you
begin registration.
2. Press and hold FIND HANDSET on the
telephone base for about four seconds until
the telephone base shows Registering...
Please wait, then release the button.
3. Press # (pound key) on the handset. The
handset shows Registering... Please wait.
It takes up to 60 seconds to complete registration. Then
HANDSET X Registered appears on both screens, with
X being the handset number, and the handset beeps. The
handset is now registered with the telephone base.
If registration fails, the handset displays Registration failed.
Please start again from Step 1 above.
•
•
•
You cannot register a handset if any other system handset is
in use.
The telephone base shows Registration slots are full when
you try to register more than 5 handsets to it.
If you have not set the date and time for the telephone system,
the handset will prompt you to set the date and time after it is
registered to the base. To skip setting, press OFF/CANCEL.
Getting started
Deregister handsets
If you want to replace a handset, or reassign the designated
handset number of a registered handset, you must deregister all
handsets that are registered to the telephone base. Then register
each handset individually.
To make deregistration easier, read all of the instructions on this
page before you begin.
To deregister all handsets:
1. Press and hold FIND HANDSET on the telephone base for
about 10 seconds until the telephone base shows Registering...
Please wait followed by Deregister all handsets?, then release
FIND HANDSET.
2. Immediately press MENU/SELECT or FIND HANDSET.
3. The deregistration process takes about 60 seconds to
complete. All handsets alternately show 1.Press FIND HS on
base 4sec and 2.Then press # on handset.
4. To register the handset(s) to the telephone base again, follow
the registration instructions on the previous page.
•
You cannot deregister all handsets if any other system handset
is in use.
•
If deregistration fails, you may need to reset the system and try
again. To reset, unplug the power from the telephone base and
plug it back in.
•
Even if the battery is depleted, you can still deregister all
handsets by following the steps above. After the handset is
charged for at least 10 minutes, its screen alternately shows
1.Press FIND HS on base 4sec and 2.Then press #
on handset.
Getting started
Handset layout
CHARGE light
On when the handset is charging in the
handset charger.
/ /VOLUME (directory)
Press to display the directory.
Press to scroll up while in menus or lists.
While entering names or numbers, press to
move the cursor to the right.
During a call or message playback, press to
increase the listening volume.
MUTE/DELETE
During a call, press to mute the microphone .
While the phone is ringing, press to silence the
ringer temporarily.
While reviewing the redial list, directory or call
log, press to delete an individual entry.
While predialing, press to delete digits.
/FLASH
Press to make or answer a call.
During a call, press to answer an incoming call
when you receive a call waiting alert.
1
While reviewing a call log entry, press
repeatedly to add or remove 1 in front of the
telephone number before dialing or saving it in
the directory.
TONE
Press to switch to tone dialing during a call if
you have pulse service.
(Speakerphone)
Press to make or answer a call.
Press to switch between the handset
speakerphone and the cordless handset.
Getting started
Handset layout
CID/ /VOLUME (caller ID)
Press to display the call log.
Press to scroll down while in menus or lists.
While entering names or numbers, press
to move the cursor to the left.
During a call or message playback, press
to decrease the listening volume.
MENU/SELECT
Press to show the menu.
While in the menu, press to select an item
or save an entry or setting.
OFF/CANCEL
During a call, press to hang up.
While in a menu, press to cancel an
operation, back up to the previous menu,
or exit the menu display.
While the phone is ringing, press to silence
the ringer temporarily.
Press and hold to erase the missed call
indicator when the handset is not in use.
Dialing keys
Press to enter numbers or characters.
Press to answer an incoming call.
# (pound key)
Press repeatedly to display other dialing
options when reviewing a call log entry.
INT
Press to initiate or answer an intercom call,
or to transfer a call.
REDIAL/PAUSE
Press repeatedly to view the last 20
numbers dialed.
While entering numbers, press and hold to
insert a dialing pause.
Appendix
Battery
It takes up to 11 hours for the battery to be fully charged. When it is fully
charged, you can expect the following performance:
Operation
Operating time
While in handset use (talking*)
Up to seven hours
While in speakerphone mode (talking*)
Up to five hours
While not in use (standby**)
Up to seven days
*Operating times vary depending on your actual use and the age of
the battery.
**Handset is not charging or in use.
The battery needs charging when:
• A new battery is installed in the handset.
• The handset beeps.
• A battery is properly installed and the screen is blank.
• Low battery or Place in charger displays on the handset screen.
CAUTION:
To reduce the risk of fire or injury, read and follow these instructions:
• Use only the battery(ies) provided or equivalent. To order a
replacement, go to www.vtechcanada.com or call 1 (800) 267-7377.
• Do not dispose of the battery(ies) in a fire. Check with local waste
management codes for special disposal instructions.
• Do not open or mutilate the battery(ies). Released electrolyte is
corrosive and may cause burns or injury to the eyes or skin. The
electrolyte may be toxic if swallowed.
• Exercise care in handling batteries in order not to create a short circuit
with conductive materials.
• Charge the battery(ies) provided with or identified for use with this
product only in accordance with the instructions and limitations
specified in this manual.
• Observe proper polarity orientation between the battery and
metallic contacts.
• To prevent fire or shock hazard, do not expose this product to water or
any type of moisture.
Appendix
Important safety instructions
When using your telephone equipment, basic safety precautions should always
be followed to reduce the risk of fire, electric shock and injury, including
the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid or
aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water such as near a bath tub, wash bowl,
kitchen sink, laundry tub or swimming pool, or in a wet basement or shower.
5. Do not place this product on an unstable table, shelf, stand or other
unstable surfaces.
6. Slots and openings in the back or bottom of the telephone base and handset
are provided for ventilation. To protect them from overheating, these openings
must not be blocked by placing the product on a soft surface such as a bed,
sofa or rug. This product should never be placed near or over a radiator or
heat register. This product should not be placed in any area where proper
ventilation is not provided.
7. This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply in your home or office, consult your dealer or local power company.
8. Do not allow anything to rest on the power cord. Do not install this product
where the cord may be walked on.
9. Never push objects of any kind into this product through the slots in the
telephone base or handset because they may touch dangerous voltage
points or create a short circuit. Never spill liquid of any kind on the product.
10. To reduce the risk of electric shock, do not disassemble this product, but
take it to an authorized service facility. Opening or removing parts of the
telephone base or handset other than specified access doors may expose
you to dangerous voltages or other risks. Incorrect reassembling can cause
electric shock when the product is subsequently used.
11. Do not overload wall outlets and extension cords.
12. Unplug this product from the wall outlet and refer servicing to an authorized
service facility under the following conditions:
• When the power supply cord or plug is damaged or frayed.
• If liquid has been spilled onto the product.
• If the product has been exposed to rain or water.
• If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the operation
instructions. Improper adjustment of other controls may result in damage
and often requires extensive work by an authorized technician to restore the
product to normal operation.
• If the product has been dropped and the telephone base and/or handset
has been damaged.
• If the product exhibits a distinct change in performance.
Appendix
Important safety instructions
13. Avoid using a telephone (other than cordless) during an electrical storm.
There is a remote risk of electric shock from lightning.
14. Do not use the telephone to report a gas leak in the vicinity of the leak.
Under certain circumstances, a spark may be created when the adapter is
plugged into the power outlet, or when the handset is replaced in its cradle.
This is a common event associated with the closing of any electrical circuit.
The user should not plug the phone into a power outlet, and should not put
a charged handset into the cradle, if the phone is located in an environment
containing concentrations of flammable or flame-supporting gases, unless
there is adequate ventilation. A spark in such an environment could create a
fire or explosion. Such environments might include: medical use of oxygen
without adequate ventilation; industrial gases (cleaning solvents; gasoline
vapors; etc.); a leak of natural gas; etc.
15. Only put the handset of your telephone next to your ear when it is in normal
talk mode.
16. The power adapter is intended to be correctly oriented in a vertical or floor
mount position. The prongs are not designed to hold the plug in place if it is
plugged into a ceiling, under-the-table or cabinet outlet.
SAVE THESE INSTRUCTIONS
10
Appendix
Precautions for users of implanted cardiac pacemakers
Cardiac pacemakers (applies only to digital cordless telephones):
Wireless Technology Research, LLC (WTR), an independent research
entity, led a multidisciplinary evaluation of the interference between
portable wireless telephones and implanted cardiac pacemakers.
Supported by the U.S. Food and Drug Administration, WTR recommends
to physicians that:
Pacemaker patients
• Should keep wireless telephones at least six inches from
the pacemaker.
•
Should NOT place wireless telephones directly over the pacemaker,
such as in a breast pocket, when it is turned ON.
•
Should use the wireless telephone at the ear opposite the pacemaker.
WTR’s evaluation did not identify any risk to bystanders with pacemakers
from other persons using wireless telephones.
Operating range
This cordless telephone operates with the maximum power allowed by the
Federal Communications Commission (FCC). Even so, this handset and
telephone base can communicate over only a certain distance - which can
vary with the locations of the telephone base and handset, the weather,
and the layout of your home or office.
When the handset is out of range, the handset displays Out of range OR
No pwr at base.
If there is a call while the handset is out of range, it may not ring, or if it does
ring, the call may not connect well when you press /FLASH. Move closer to
the telephone base, then press /FLASH to answer the call.
If the handset moves out of range during a telephone conversation,
there may be interference. To improve reception, move closer to the
telephone base.
11
Appendix
Maintenance
Taking care of your telephone
Your cordless telephone contains sophisticated electronic parts, so it must
be treated with care.
Avoid rough treatment
Place the handset down gently. Save the original packing materials to
protect your telephone if you ever need to ship it.
Avoid water
Your telephone can be damaged if it gets wet. Do not use the handset
outdoors in the rain, or handle it with wet hands. Do not install the
telephone base near a sink, bathtub or shower.
Electrical storms
Electrical storms can sometimes cause power surges harmful to electronic
equipment. For your own safety, take caution when using electrical
appliances during storms.
Cleaning your telephone
Your telephone has a durable plastic casing that should retain its luster for
many years. Clean it only with a soft cloth slightly dampened with water or mild
soap. Do not use excess water or cleaning solvents of any kind.
Remember that electrical appliances can cause serious injury if used when you
are wet or standing in water. If the telephone base should fall into water, DO NOT
RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD AND TELEPHONE LINE
CORD FROM THE WALL. Then remove the telephone by the unplugged cords.
12
Appendix
About cordless telephones
•
Privacy: The same features that make a cordless telephone convenient create
some limitations. Telephone calls are transmitted between the telephone
base and the cordless handset by radio waves, so there is a possibility that
the cordless telephone conversations could be intercepted by radio receiving
equipment within range of the cordless handset. For this reason, you should
not think of cordless telephone conversations as being as private as those on
corded telephones.
•
Electrical power: The telephone base of this cordless telephone must be
connected to a working electrical outlet. The electrical outlet should not be
controlled by a wall switch. Calls cannot be made from the cordless handset if the
telephone base is unplugged, switched off or if the electrical power is interrupted.
•
Potential TV interference: Some cordless telephones operate at frequencies
that may cause interference to televisions and VCRs. To minimize or prevent
such interference, do not place the telephone base of the cordless telephone
near or on top of a TV or VCR. If interference is experienced, moving the
cordless telephone farther away from the TV or VCR often reduces or eliminates
the interference.
•
Rechargeable batteries: Exercise care in handling batteries in order not to
create a short circuit with conducting material such as rings, bracelets and keys.
The battery or conductor may overheat and cause harm. Observe proper polarity
between the battery and the battery charger.
•
Nickel-metal hydride rechargeable batteries: Dispose of these batteries in
a safe manner. Do not burn or puncture the battery. Like other batteries of this
type, if burned or punctured, they could release caustic material which could
cause injury.
13
Appendix
The RBRC® seal
The RBRC® seal on the nickel-metal hydride battery indicates that VTech
Communications, Inc. is voluntarily participating in an industry program to collect
and recycle these batteries at the end of their useful lives, when taken out of service
within the United States and Canada.
The RBRC® program provides a convenient alternative to placing used nickel-metal
hydride batteries into the trash or municipal waste, which may be illegal in your area.
VTech’s participation in RBRC® makes it easy for you to drop off the spent battery
at local retailers participating in the RBRC® program or at authorized VTech product
service centers. Please call 1 (800) 8 BATTERYTM for information on Ni-MH battery
recycling and disposal bans/restrictions in your area. VTech’s involvement in this
program is part of its commitment to protecting our environment and conserving
natural resources.
RBRC® is a registered trademark of Rechargeable Battery Recycling Corporation.
14
Appendix
FCC, ACTA and IC regulations
FCC Part 15
This equipment has been tested and found to comply with the requirements for a
Class B digital device under Part 15 of the Federal Communications Commission
(FCC) rules. These requirements are intended to provide reasonable protection
against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation. Privacy of communications may not be ensured when
using this telephone.
To ensure safety of users, the FCC has established criteria for the amount of radio
frequency energy that can be safely absorbed by a user or bystander according to the
intended usage of the product. This product has been tested and found to comply with
the FCC criteria. The handset may be safely held against the ear of the user.
The telephone base shall be installed and used such that parts of the user’s body
other than the hands are maintained at a distance of approximately 20 cm (8 inches)
or more.
This Class B digital apparatus complies with Canadian ICES-003.
15
Appendix
FCC, ACTA and IC regulations
FCC Part 68 and ACTA
This equipment complies with Part 68 of the FCC rules and with technical
requirements adopted by the Administrative Council for Terminal Attachments
(ACTA). The label on the back or bottom of this equipment contains, among other
things, a product identifier in the format US:AAAEQ##TXXXX. This identifier must be
provided to your telephone service provider upon request.
The plug and jack used to connect this equipment to premises wiring and the telephone
network must comply with applicable Part 68 rules and technical requirements adopted
by ACTA. A compliant telephone cord and modular plug is provided with this product.
It is designed to be connected to a compatible modular jack that is also compliant. An
RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for
two lines. See the installation instructions in the user’s manual.
The Ringer Equivalence Number (REN) is used to determine how many devices you
may connect to your telephone line and still have them ring when you are called. The
REN for this product is encoded as the 6th and 7th characters following the US: in the
product identifier (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the sum
of all RENs should be five (5.0) or less. For more information, contact your telephone
service provider.
This equipment may not be used with Party Lines. If you have specially wired alarm
dialing equipment connected to your telephone line, ensure the connection of this
equipment does not disable your alarm equipment. If you have questions about what will
disable alarm equipment, consult your telephone service provider or a qualified installer.
If this equipment is malfunctioning, it must be unplugged from the modular jack until
the problem has been corrected. Repairs to this telephone equipment can only be
made by the manufacturer or its authorized agents. For repair procedures, follow the
instructions outlined under the Limited warranty.
If this equipment is causing harm to the telephone network, the telephone service
provider may temporarily discontinue your telephone service. The telephone service
provider is required to notify you before interrupting service. If advance notice is not
practical, you will be notified as soon as possible. You will be given the opportunity
to correct the problem and the telephone service provider is required to inform you
of your right to file a complaint with the FCC. Your telephone service provider may
make changes in its facilities, equipment, operation, or procedures that could affect
the proper functioning of this product. The telephone service provider is required to
notify you if such changes are planned.
If this product is equipped with a corded or cordless handset, it is hearing aid compatible.
If this product has memory dialing locations, you may choose to store emergency
telephone numbers (e.g., police, fire, medical) in these locations. If you do store or
test emergency numbers, please:
Remain on the line and briefly explain the reason for the call before hanging up.
Perform such activities in off-peak hours, such as early morning or late evening.
16
Appendix
Industry Canada
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference, including
interference that may cause undesired operation.
The term ‘’IC:‘’ before the certification/registration number only signifies that the
Industry Canada technical specifications were met.
The Ringer Equivalence Number (REN) for this terminal equipment is 0.8. The REN
is an indication of the maximum number of devices allowed to be connected to a
telephone interface. The termination on an interface may consist of any combination
of devices subject only to the requirement that the sum of the RENs of all the devices
does not exceed five.
This product meets the applicable Industry Canada technical specifications.
17
Appendix
Limited warranty
What does this limited warranty cover?
The manufacturer of this VTech Product warrants to the holder of a valid proof of
purchase (“Consumer” or “you”) that the Product and all accessories provided in
the sales package (“Product”) are free from defects in material and workmanship,
pursuant to the following terms and conditions, when installed and used normally and
in accordance with the Product operating instructions. This limited warranty extends
only to the Consumer for Products purchased and used in the United States of
America and Canada.
What will VTech do if the Product is not free from defects in materials
and workmanship during the limited warranty period (“Materially
Defective Product”)?
During the limited warranty period, VTech’s authorized service representative will
repair or replace at VTech’s option, without charge, a Materially Defective Product.
If we repair the Product, we may use new or refurbished replacement parts. If we
choose to replace the Product, we may replace it with a new or refurbished Product
of the same or similar design. We will retain defective parts, modules, or equipment.
Repair or replacement of the Product, at VTech’s option, is your exclusive remedy.
VTech will return the repaired or replacement Products to you in working condition.
You should expect the repair or replacement to take approximately 30 days.
How long is the limited warranty period?
The limited warranty period for the Product extends for ONE (1) YEAR from the
date of purchase. If VTech repairs or replaces a Materially Defective Product under
the terms of this limited warranty, this limited warranty also applies to repaired or
replacement Product for a period of either (a) 90 days from the date the repaired or
replacement Product is shipped to you or (b) the time remaining on the original
one-year warranty; whichever is longer.
What is not covered by this limited warranty?
This limited warranty does not cover:
1. Product that has been subjected to misuse, accident, shipping or other physical
damage, improper installation, abnormal operation or handling, neglect, inundation,
fire, water or other liquid intrusion; or
2. Product that has been damaged due to repair, alteration or modification by
anyone other than an authorized service representative of VTech; or
3. Product to the extent that the problem experienced is caused by signal
conditions, network reliability, or cable or antenna systems; or
4. Product to the extent that the problem is caused by use with non-VTech
accessories; or
5. Product whose warranty/quality stickers, product serial number plates or
electronic serial numbers have been removed, altered or rendered illegible; or
18
Appendix
Limited warranty
6. Product purchased, used, serviced, or shipped for repair from outside the United
States of America or Canada, or used for commercial or institutional purposes
(including but not limited to Products used for rental purposes); or
7. Product returned without a valid proof of purchase (see item 2 below); or
8. Charges for installation or set up, adjustment of customer controls, and
installation or repair of systems outside the unit.
How do you get warranty service?
To obtain warranty service, please visit our website at www.vtechcanada.com or call
1 (800) 267-7377.
NOTE: Before calling for service, please review the user’s manual - a check of the
Product’s controls and features may save you a service call.
Except as provided by applicable law, you assume the risk of loss or damage during
transit and transportation and are responsible for delivery or handling charges
incurred in the transport of the Product(s) to the service location. VTech will return
repaired or replaced Product under this limited warranty. Transportation, delivery
or handling charges are prepaid. VTech assumes no risk for damage or loss of the
Product in transit. If the Product failure is not covered by this limited warranty, or
proof of purchase does not meet the terms of this limited warranty, VTech will notify
you and will request that you authorize the cost of repair prior to any further repair
activity. You must pay for the cost of repair and return shipping costs for the repair of
Products that are not covered by this limited warranty.
What must you return with the Product to get warranty service?
1. Return the entire original package and contents including the Product to the
VTech service location along with a description of the malfunction or difficulty;
and
2. Include a “valid proof of purchase” (sales receipt) identifying the Product
purchased (Product model) and the date of purchase or receipt; and
3. Provide your name, complete and correct mailing address, and telephone number.
19
Appendix
Limited warranty
Other limitations
This warranty is the complete and exclusive agreement between you and VTech. It
supersedes all other written or oral communications related to this Product. VTech
provides no other warranties for this Product. The warranty exclusively describes
all of VTech’s responsibilities regarding the Product. There are no other express
warranties. No one is authorized to make modifications to this limited warranty and
you should not rely on any such modification.
State/Provincial Law Rights: This warranty gives you specific legal rights, and you
may also have other rights, which vary from state to state or province to province.
Limitations: Implied warranties, including those of fitness for a particular purpose and
merchantability (an unwritten warranty that the Product is fit for ordinary use) are limited
to one year from the date of purchase. Some states/provinces do not allow limitations
on how long an implied warranty lasts, so the above limitation may not apply to you.
In no event shall VTech be liable for any indirect, special, incidental, consequential, or
similar damages (including, but not limited to lost profits or revenue, inability to use the
Product or other associated equipment, the cost of substitute equipment, and claims
by third parties) resulting from the use of this Product. Some states/provinces do not
allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.
Please retain your original sales receipt as proof of purchase.
20
Appendix
Technical specifications
Frequency control
Crystal controlled PLL synthesizer
Transmit frequency
Handset: 1921.536-1928.448 MHz
Telephone base: 1921.536-1928.448 MHz
Channels
5
Nominal effective
range
Maximum power allowed by FCC and IC. Actual operating
range may vary according to environmental conditions at the
time of use.
Power requirements
Handset: 2.4V Ni-MH battery
Handset charger: 6V AC @ 300mA
Memory
Directory: 50 memory locations;
up to 30 digits and 15 characters
Call log: 50 memory locations;
up to 24 digits and 15 characters
21
VTECH TELECOMMUNICATIONS LTD.
A member of THE VTECH GROUP OF COMPANIES.
Distributed in the U.S.A. by VTech Communications, Inc.,
Beaverton, Oregon. 97008.
Distributed in Canada by VTech Technologies Canada Ltd.,
Richmond, B.C. V6W 1L5.
Copyright © 2011 for VTECH TELECOMMUNICATIONS LTD.
VTech is the registered trademark of VTech Holdings Limited.
Printed in China.
91-004308-030-100
Download PDF