CyberView | RP-F617TV | User manual | CyberView RP-F617TV User manual

dedicated KVM switch and rackmount screen technology
User Manual
17” High Resolution 1920 x 1200 LCD
RMP-161-X17
6U Rackmount Display Panel
Options :
- SDI
- DC power
- Touchscreen
- MIL-type or lockable connector
Designed and manufactured by Austin Hughes
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■
■
■
■
■
■
■
■
■
■
■
Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing dam
age to other equipment or injury to persons nearby.
When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
Observe all precautions and warnings attached to the equipment.
If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being dam
aged by transient over-voltage.
Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock.
Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and invali
date its warranty.
If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.
What the warranty does not cover
■
■
■
Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuation or failure.
Use of supplies or parts not meeting our specifications.
Normal wear and tear.
Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
□
□
□
□
□
□
□
□
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■ Re-position or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
UM-CV-RP-X617-Q212V2
www.austin-hughes.com
Contents
< Part. 1 > RMP-161-X617
1.1
1.2
1.3
Package Content
Structure Diagram & Dimension
Installation
P.1
P.1 - 2
P.3
< Part. 2 > Specifications / OSD / Remote Controller
2.1
2.2
Product Specifications
On-screen Display Operation ( OSD )
P.4 - 5
P.6 - 7
< Part. 3 > Options
3.1
3.2
3.3
3.4
3G / HD / SD-SDI Broadcast-grade input
X17” Touchscreen : Resistive, Capacitive
48V, 24V or 12VDC power
MIL-type or lockable connector
UM-CV-RP-X617-Q212V2
P.8
P.9
P.10
P.11
www.austin-hughes.com
Before Installation
■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
Unpacking
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
How To Clean Your LCD Monitor
Caution :
■
To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
■
When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
■
Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip off the finish.
■
Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
■
Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based
paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
1
Disconnect the power cord.
2
Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
1
Disconnect the power cord.
2
Spray a small amount of non-abrasive cleanser on a microfiber cloth.
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
microfiber cloth first, not directly on the parts you are cleaning.
3
Gently wipe the surface. Use as little pressure as possible.
4
Wait until your monitor is completely dry before plugging it in and powering it up.
UM-CV-RP-X617-Q212V2
www.austin-hughes.com
< Part 1 >
< 1.1 > Package Content
RMP-161-X617 X 1
6ft VGA cable X 1
Power adapter X 1
Power cord X 1
< 1.2 > Structure Diagram
Front view
2
1
Power adapter
Rear view
3
1
LCD panel
2
LCD membrane
3
Power adapter basket
DVI-D
Audio
Power cord
Power BNC S-Video VGA
HDMI
out - in - in
Video PC
Standard I/O : HDMI, DVI-D, Audio, S-Video, BNC, VGA
Options I/O : USB for touchscreen, SDI, DC power
UM-CV-RP-X617-Q212V2
P.1
www.austin-hughes.com
< 1.2 > Dimension
Front View
Side View
UNIT : mm
Bottom View
Model
RMP161-X617
1mm = 0.03937 inch
Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net
Weight
Gross
Weight
480 x 58 x 266 mm
18.9 x 2.3 x 10.5 inch
529 x 124 x 451 mm
20.8 x 4.9 x 17.8 inch
6 kg
13.2 lbs
8 kg
17.6 lbs
UM-CV-RP-X617-Q212V2
P.2
www.austin-hughes.com
< 1.3 > Installation
Step
■
■
1
Mount the display panel with M6 screw set.
M6 screw x 4 pcs required ( Left & right side ).
M6 screw sets are not provided.
Step
■
UM-CV-RP-X617-Q212V2
P.3
2
Fix the LCD into the rack.
www.austin-hughes.com
< Part 2 >
< 2.1 > Product Specifications
LCD
Panel
Panel Size ( diagonal )
17.1-inch Widescreen TFT color LCD
Display pixel ( dots x lines )
1920 x 1200
Brightness ( typ. )
210
Contrast Ratio ( typ. )
800:1
Color
1.07 b
Viewing Angle ( L/R/U/D )
89/89/89/89
Response Time ( ms )
30
Dot pitch ( mm )
0.191
Display Area ( mm )
367.20H x 229.50V
Surface treatment
Anti-glare, Hard-coating
Surface hardness
3H
Backlight Type
LED
MTBF ( hrs )
Video
Connectivity
Digital
HDMI
HDMI 1.1, CEA-861-D
DVI
DVI-D, TMDS single link
VGA
Analog 0.7Vp-p
Composite ( RCA )
NTSC & PAL
S-Video ( 4-pin )
NTSC & PAL
Plug & Play
DVI / VGA
VESA EDID structure 1.3
Synchronization
VGA
Separate, Composite & SOG
Audio Input
Connector
3.5mm stereo jack
Impedance / Power level
30kΩ / 750mV
Connector
3.5mm stereo jack
Resistance / Power level
30kΩ / 2.8V
Power
2 x 2W
Analog
Audio
Connectivity
15,000
Audio Output
Speaker Output
*When the audio output is connected, speaker output is OFF
Power
Regulatory
Power Supply
Range
Auto-sensing 100 to 240VAC,
50 / 60Hz
Power Consumption
Screen display ON
34W or less
Power saving mode
4W or less
Power button OFF
1W or less
Safety Approval
UM-CV-RP-X617-Q212V2
FCC & CE
P.4
wwwûustin-hughes.com
RMP-161-X617
Environmental
Conditions
Operating
Storage
Physical
Specification
Temperature
0 to 50°C degree
Humidity
20~90%, non-condensing
Temperature
-5 to û°C degree
Humidity
5~90%, non-condensing
Shock
10G acceleration (11ms duration)
Vibration
5~500Hz 1G RMS random
Product ( W x D x H )
480 x 58 x 266 mm
18.9 x 2.3 x 10.5 inch
Packing ( W x D x H )
529 x 124 x 451 mm
20.8 x 4.9 x 17.8 inch
Applicable
Format
Net Weight
6 kgs / 13.2 lbs
Gross Weight
8 kgs / 17.6 lbs
DVI-D / VGA Input
PC Signal
1920 x 1200 x 60Hz
1920 x 1080 x 60Hz
1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 768 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
HDMI Input
PC Signal
Same as VGA
Video Signal
1080p : 60Hz
Audio Signal
UM-CV-RP-X617-Q212V2
P.5
720p
: 50 / 60Hz
480p
: 60Hz
576p
: 50Hz
2ch Linear PCM ( 32 / 44.1 / 48 KHz )
www.austin-hughes.com
< 2.2 > On-screen Display Operation ( OSD )
Power light
Green = On
Orange = Power saving
Membrane Switch
Function
Power on / off LCD
Display the OSD menu
Scrolls through menu options and adjusts the displayed control
(To auto adjustment by pressing the button
for 5 seconds)
Exit the OSD screen
Toggle analog, digital & video connection (DVI-D and video options only)
1
2
Picture
Picture mode :
Standard / Vivid / Soft / User mode to choose
Brightness :
Adjust background black level of the screen image
Contrast :
Adjust the difference between the image background
(black level) and the foreground (white level)
Hue:
Adjust the screen hue value
Saturation :
Adjust the saturation of the image color
Picture size :
Adjust the image size
Color temp :
Standard / Cool / Warm / User to choose
Noise reduce :
Reduce the noise of the image
Sharpness :
Adjust the image from weak to sharp
PC
Auto adjust :
Automatically adjust sizes, centers and fine tunes the
video signal to eliminate waviness and distortion.
Clock :
Adjust the clock value
Phase :
Adjust the phase value
H. Position :
Align the screen image left or right
V. Position :
Align the screen image up or down
UM-CV-RP-X617-Q212V2
P.6
www.austin-hughes.com
< 2.2 > On-screen Display Operation ( OSD )
3
RP-X617
Audio
Audio mode :
Movie / Voice / Normal / Music mode to choose
Volume :
Adjust the volume of sound
Bass :
Set the value of bass sound
Treble :
Set the value of treble sound
Balance :
Set the balance value of treble and bass sound
Analog TV audio : Set the value of analog TV audio sound
Mute :
4
5
Turn off the surrounding sound
TV
Auto search :
Automatically search
Manual search :
Search the TV manual
Fine tune :
Fine tune the TV signal
Color system :
Adjust the TV color
Sound system :
Adjust the TV sound
Channel edit :
Edit the channel
MISC
Language :
Select the language in which the OSD menu is
displayed - English
Sleep timer :
Set the off time
PIP mode :
Adjust picture in picture setting
PIP position :
Enter into PIP position
PIP source :
Enter into the Sub source and sound source
System reset :
Return the adjustment back to factory setting
Information :
Select for Help
UM-CV-RP-X617-Q212V2
P.7
www.austin-hughes.com
< Part 3 >
< 3.1 > Options : 3G / HD / SD-SDI input
SDI input is an ideal solution for the broadcastgrade video and high resolution CCTV market.
For use with Full HD 1080p and ultra high
resolution 1920 x 1200 LCD displays, SDI provides an
SDI input module without using additional space or power and it
comes standard with a 2-year warranty.
SDI
Audio
DVI-D
Power BNC S-Video
VGA
out - in - in
Video PC
INPUT
Standard Compliance
Compatible Video Format
Compatible Audio Format
Max. Transmission Distance
75 ohm coaxial cable
UM-CV-RP-X617-Q212V2
HDMI
out
-
in
3G-SDI IN
BNC x 1 / 0.8Vp-p ( 75 ohm )
3G-SDI OUT
BNC x 1 / Active through, equalized & relocked
Video
SMPTE 425M / 274M / 296M / 125M
ITU-R BT.656
Audio
SMPTE 299M / 272M-C
3G-SDI
1080p
1080p
1080i
720p
@60 / 50Hz, 4:2:2
@30 / 25 / 24Hz, 4:4:4
@60 / 50Hz, 4:4:4
@60 / 50Hz, 4:4:4
HD-SDI
1080p
1080i
720p
@30 / 25 / 24Hz, 4:2:2
@60 / 50Hz, 4:2:2
@60 / 50Hz, 4:2:2
SD-SDI
480i
@60Hz, 4:2:2
ITU-R BT.656
576i
@50Hz, 4:2:2
3G-SDI
48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
HD-SDI
48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
SD-SDI
48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized /
Asynchronized Video
3G-SDI
150m at 2.97Gb/s
HD-SDI
250m at 1.485Gb/s
SD-SDI
480m at 270Mb/s
P.8
www.austin-hughes.com
< 3.2 > Options : Touchscreen & driver
RMP-161-X617
USB Touchscreen Specification
Model
TRB
TCB
e-Resistive
e-Capacitive
Technology
5-Wire Resistive
Capacitive
Touch Point
Single
Single
Stylus or Finger
Finger
≤ 50g / Stylus=R0.8
≤ 50g
Method
Activation Force
Durability
10 million touches
Response Time
300 millûn touches
15 ms
20 ms
80% ± 3%
92% ±2%
3H
9H
Haze
8% ± 3%
7%
Glass
2.2 ±0.2 mm
2.8 mm ±10%
Optical Transmittance
Surface Hardness
Connector
USB Type A
Compatibility
■
■
■
Windows 7 / XP / Vista, Linux
USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc
For detailed information, please refer to the attached CD disc
As the touchscreen unit is not made of toughened glass, please handle it carefully
USB Touchscreen
Audio
DVI-D
Power BNC S-Video
VGA
HDMI
out - in - in
Video PC
TRB & TCB Driver
Please follow the below steps to setup the touch screen:Step 1. Run the bundled CD disc - download the driver :
Step 2. Double click the Setup.exe
Step 3. Follow the installation instruction to finish the setup
Step 4. After installation, run the TouchKit program & the “4 point calibration”
Please do the initial calibration
after the first setup
UM-CV-RP-X617-Q212V2
P.9
www.austin-hughes.com
< 3.3 > Options : DC Power
Model
12V
24V
48V
Input voltage:
12-Volt
24-Volt
48-Volt
Input range:
9 ~ 18V
18 ~ 36V
36 ~ 75V
- No load
50 mA
50 mA
50 mA
- Full load
4950 mA
2450 mA
1220 mA
Output voltage:
12-Volt
12-Volt
12-Volt
Output current:
4.16A
4.16A
4.16A
Efficiency
84%
85%
85%
Input rating
Input current
Output rating
UM-CV-RP-X617-Q212V2
P.10
www.austin-hughes.com
< 3.4 > Options : MIL-type or Lockable Connector
Input
MIL - type
Connector
Part no.
RMP-161-X617
MIL Standard
DC Power ***
( Male )
MS3470W8-33P
MIL - DTL - 26482
VGA ***
( Male )
MS3470W14-15P
MIL - DTL - 26482
*** There are several additional MIL DC and VGA connector types with varying design
characteristics to meet cost considerations and to provide users with the most
design flexibility possible. For more information, please contact us.
Input
Lockable
Connector
Part no.
DC Power
( Male )
YM-Ext-461CP001
USB
LUSB - A111 - 00
Standard
D-type 3W3
-
*** MIL - type or Lockable connectors above can be integrated with our LCD displays.
Sale service just for connectors not provided.
UM-CV-RP-X617-Q212V2
P.11
www.austin-hughes.com
Download PDF