TOTOLINK How to Owner's Manual

www.totolink.net
How to setup DHCP server protection for the router?
It is suitable for: N150RA, N300R Plus, N300RA, N300RB, N300RG, N301RA, N302R Plus, N303RB,
N303RBU, N303RT Plus, N500RD, N500RDG, N505RDU, N600RD, A1004, A2004NS,
A5004NS, A6004NS
Application:
The Remote Management feature allows you to manage the gateway from a remote location, via the Internet.
You can use the gateway’s Internet IP Address to enter the router’s setting interface.
STEP-1: Connect your computer to the router
1-1. Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.1.1 into the
address bar of your browser.
Note: The default IP address of TOTOLINK router is 192.168.1.1, the default Subnet Mask is 255.255.255.0. If you can't log in,
Please restore factory settings.
1-2. Please click Setup Tool icon
to enter the router’s setting interface.
1-3. Please login to the Web Setup interface (the default user name and password is admin).
STEP-2:
Click Advanced Setup->Firewall->Mgmt Access Control on the navigation bar on the left.
STEP-3:
Check the box to enable Remote Mgmt port and enter the desired port in the box (default port is 8080),
and then click Apply button.
STEP-4:
Next to click Use Remote Accesslist and type in the IP allowed if you want to remotely manage by a
specify IP address.
STEP-5:
After that you can enter the setup interface by WAN IP+Remote Mgmt port.
">