Magnavox | 39ME313V | Owner`s manual | Magnavox 39ME313V Owner`s manual

Owner’s Manual
Manual del Propietario
Manuel du Propriétaire
39ME313V/F7 A
English
55ME314V
50ME314V
40ME314V
40ME324V
32ME304V
28ME304V
Necesita ayuda
inmediata?
Español
www.magnavox.com/support
www.magnavox.com/support
www.magnavox.com/support
1 866 341 3738
1 866 341 3738
1 866 341 3738
Français
EN : To obtain a more detailed Electronic Copy of this Manual, go to www.magnavox.com/support
ES : Para obtener una Copia Electrónica más detallada de este Manual, visite, www.magnavox.com/support
FR : Pour obtenir une Copie Électronique plus détaillée de ce Manuel, allez sur www.magnavox.com/support
Register Online at www.magnavox.com/support today
to get the very most from your purchase.
Registering your model with MAGNAVOX makes you eligible for all of the valuable benefits listed below, so don't miss out.
Register Online at www.magnavox.com/support to ensure:
*Product Safety Notification
*Additional Benefits
By Registering your Product, you'll receive notification directly from the manufacturer - in the rare case of a
Product Recall or Safety Defect.
Registering your Product guarantees that you'll receive
all of the Privileges to which you're Entitled, including
special money-saving offers.
Know these safety symbols
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the apparatus’s enclosure
that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the apparatus.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The caution marking is located on the rear or bottom of the cabinet.
WARNING:
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall
not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the
apparatus.
CAUTION:
ATTENTION:
To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Pour éviter les choc électriques,introduire la lame la plus large de la fiche dans la borne correspondante de la
prise et pousser jusqu’au fond.
Visit our World Wide Web Site at www.magnavox.com/support
CHILD SAFETY:
PROPER TELEVISION PLACEMENT MATTERS
THE CONSUMER ELECTRONICS INDUSTRY
CARES
• Manufacturers, retailers and the rest of the consumer
electronics industry are committed to making home
entertainment safe and enjoyable.
• As you enjoy your television, please note that all
televisions – new and old- must be supported on proper
stands or installed according to the manufacturer’s
recommendations. Televisions that are inappropriately
situated on dressers, bookcases, shelves, desks, speakers,
chests, carts, etc., may fall over, resulting in injury.
TUNE IN TO SAFETY
• ALWAYS follow the manufacturer’s recommendations
for the safe installation of your television.
• ALWAYS read and follow all instructions for proper use
of your television.
• NEVER allow children to climb on or play on the
television or the furniture on which the television is
placed.
• NEVER place the television on furniture that can easily
be used as steps, such as a chest of drawers.
• ALWAYS install the television where it cannot be
pushed, pulled over or knocked down.
• ALWAYS route cords and cables connected to the
television so that they cannot be tripped over, pulled or
grabbed.
WALL OR CEILING MOUNT YOUR
TELEVISION
• ALWAYS contact your retailer about professional
installation if you have any doubts about your ability to
safely mount your television.
• ALWAYS use a mount that has been recommended by
the television manufacturer and has a safety certification
by an independent laboratory (such as UL, CSA, ETL).
• ALWAYS follow all instructions supplied by the
television and mount manufacturers.
• ALWAYS make sure that the wall or ceiling where you
are mounting the television is appropriate. Some mounts
are not designed to be mounted to walls and ceilings
with steel studs or cinder block construction. If you are
unsure, contact a professional installer.
• Televisions can be heavy. A minimum of two people is
required for a wall or ceiling mount installation.
MOVING AN OLDER TELEVISION TO A NEW
PLACE IN YOUR HOME
• Many new television buyers move their older CRT
televisions into a secondary room after the purchase of a
flat-panel television. Special care should be made in the
placement of older CRT televisions.
• ALWAYS place your older CRT television on furniture
that is sturdy and appropriate for its size and weight.
• NEVER place your older CRT television on a dresser
where children may be tempted to use the drawers to
climb.
• ALWAYS make sure your older CRT television does
not hang over the edge of your furniture.
2
Important Safety Instructions
1.
2.
3.
4.
5.
6.
7.
13.Unplug this apparatus during lightning storms or when
unused for long periods of time.
14.Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
Note to the CATV system installer:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.
Example of Antenna Grounding as per NEC - National
Electric Code
GROUND CLAMP
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
ELECTRIC SERVICE EQUIPMENT
Wall Mount Bracket Kit
Brand
55ME314V
50ME314V
40ME314V
40ME324V
•
•
•
•
Model #
PLA50B
SANUS
SAN18B
39ME313V/F7 A
SAN25BB
POWER SERVICE GROUNDING ELECTRODE
SYSTEM (NEC ART 250, PART H)
Funai is not liable for these types of accidents or injury
noted below.
Screw
dimension
• Install the Wall Mount Bracket on a sturdy vertical wall.
• If installed onto a ceiling or slanted wall, the TV and Wall
Mount Bracket may fall which could result in a severe injury.
• Do not use screws that are longer or shorter than their
specified length. If screws too long are used this may cause
mechanical or electrical damage inside the TV set. If screws
too short are used this may cause the TV set to fall.
• Do not fasten the screws by excessive force. This may
damage the product or cause the product to fall, leading to
an injury.
• For safety reasons use 2 people to mount the TV onto a
Wall Mounting Bracket.
• Do not mount the TV onto the Wall Mounting Bracket
while your TV is plugged in or Turned On. It may result in an
electrical shock injury.
When installing the unit on the wall, allow this much space.
Top:
11.8 inches (30cm)
Left and right side:
5.9 inches (15cm)
Bottom:
3.9 inches (10cm)
M6 x 0.472"
(12mm)
SAN25BB
32ME304V
28ME304V
ANTENNA LEAD IN WIRE
M4 x 0.472”
(12mm)
The recommended Wall Mount Bracket Kit (sold
separately) allows the mounting of the TV on the wall.
For detailed information on installing the wall mount,
refer to the Wall Mount Instruction Book.
Funai is not responsible for any damage to the product
or injury to yourself or others if you elect to install the
TV Wall Mount Bracket or mount the TV onto the
Bracket on your own.
The Wall Mount Bracket must be installed by experts.
3
English
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10.Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11.Only use attachments / accessories specified by the
manufacturer.
12.Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or
sold with the apparatus. When a cart
is used, use caution when moving the
cart / apparatus combination to avoid
injury from tip-over.
1 Notice
Modifications
This apparatus may generate or use radio frequency energy. Changes or
modifications to this apparatus may cause harmful interference unless
the modifications are expressly approved in the Owner’s Manual.
The user could lose the authority to operate this apparatus if an
unauthorized change or modification is made.
MAGNAVOX is a registered trademark of Philips North America
Corporation and is used by Funai Electric Co., Ltd. and Funai
Corporation, Inc. under license from Philips North America.
Funai reserves the right to change products at any time without being
obliged to adjust earlier supplies accordingly.
The material in this Owner’s Manual is believed adequate for the
intended use of the system. If the product or its individual modules or
procedures are used for purposes other than those specified herein,
confirmation of their validity and suitability must be obtained. Funai
warrants that the material itself does not infringe any United States
patents. No further warranty is expressed or implied.
Funai cannot be held responsible neither for any errors in the content
of this document nor for any problems as a result of the content in
this document. Errors reported to Funai will be adapted and published
on the Funai support website as soon as possible.
Cables
Connections to this device must be made with shielded cables with
metallic RFI / EMI connector hoods to maintain compliance with FCC
Rules and Regulations.
Canadian notice
CAN ICES-3 (B)/NMB-3 (B)
Standard Television Receiving Apparatus, Canada BETS-7 / NTMR-7.
Copyright
All other registered and unregistered trademarks are the property of
their respective owners.
Pixel characteristics
The terms HDMI and HDMI
High-Definition Multimedia Interface,
and the HDMI Logo are trademarks
or registered trademarks of HDMI
Licensing LLC in the United States
and other countries.
This LCD product has a high number of color pixels. Although it has
effective pixels of 99.999% or more, black dots or bright points of light
(red, green or blue) may appear constantly on the screen. This is a
structural property of the display (within common industry standards)
and is not a malfunction.
Warranty
Manufactured under license from
Dolby Laboratories. Dolby and the
double-D symbol are trademarks of
Dolby Laboratories.
No components are user serviceable. Do not open or remove covers
to the inside of the product. Repairs may only be done by Service
Centers and official repair shops. Failure to do so shall void any
warranty, stated or implied.
Any operation expressly prohibited in this Owner’s Manual, any
adjustments or assembly procedures not recommended or authorized
in this Owner’s Manual shall void the warranty.
For DTS patents, see
http://patents.dts.com.
Manufactured under license from DTS
Licensing Limited. DTS, the Symbol, &
DTS and the Symbol together are
registered trademarks, and DTS
TruSurround is a trademark of DTS,
Inc. © DTS, Inc. All Rights Reserved.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits
for a Class B Digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio or television
technician for help.
ENERGY STAR® is a joint program of
the U.S. Environmental Protection
Agency and the U.S. Department of
Energy helping us all save money and
protect the environment through
energy efficient products and practices.
Consumer Notice:
This TV has been set to maximize energy efficiency while delivering
the best possible picture using the factory installed home mode
settings.
Changing or enabling other features in this TV (e.g. brightened
backlighting) will possibly increase energy consumption beyond the
original ENERGY STAR® qualified limits.
Declaration of Conformity
Trade Name
: MAGNAVOX
Responsible Party
: FUNAI CORPORATION, Inc.
Model
: 55ME314V, 50ME314V, 40ME314V,
40ME324V, 32ME304V, 28ME304V,
39ME313V/F7 A
Address
: 19900 Van Ness Avenue, Torrance, CA
90501 U.S.A.
Telephone Number
: 1 866 341 3738
Portions of this software are copyright © The FreeType Project
(www.freetype.org).
The American Academy of Pediatrics discourages television viewing
for children younger than two years of age.
© 2013 Funai Electric Co., Ltd. All rights reserved.
No part of this Owner’s Manual may be reproduced, transmitted,
disseminated or transcribed, in any form or for any purpose without
the express prior written consent of Funai. Furthermore, any
unauthorized commercial distribution of this Owner’s Manual or any
revision hereto is strictly prohibited.
4
2 Important
Environmental Care
Positioning the TV
•
•
•
•
•
•
•
•
•
•
•
The packaging of this product is intended to be recycled.
Contact your local authorities for information about how to recycle
the packaging.
For product recycling information, please visit -
End of Life Directives
Magnavox pays a lot of attention to produce environmental-friendly
products in green focal areas. Your new TV contains materials which
can be recycled and reused. At the end of its life, specialized
companies can dismantle the discarded TV to concentrate the
reusable materials and to minimize the amount of materials to be
disposed of. Please ensure you dispose of your old TV according to
local regulations.
Disposal of Used Batteries
The Batteries supplied do not contain the heavy metals mercury
and cadmium. Nevertheless, in many areas Batteries may not be
disposed of with your household waste. Please ensure you dispose
of Batteries according to local Regulations.
Downloading an Owner’s Manual
Regulatory Notices
To obtain a more detailed electronic copy of this Owner’s Manual :
Do not place the Unit on the furniture that is capable of being tilted by
a child and an adult leaning, pulling, standing or climbing on it. A falling
Unit can cause serious injury or even death.
This apparatus should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided.
Make sure to leave a space of 4 inches (10cm) or more around this
apparatus.
Press to turn the Unit on and go into standby mode.
To completely turn off the Unit, you must unplug the AC power cord.
Disconnect the AC plug to shut the Unit off when trouble is found or
not in use. The AC plug shall remain readily available.
1
Point your browser to :
http://www.magnavox.com/support/download
2
3
Enter the model number in the “Type the Model Number...”
field.
Click the desired Manual to be downloaded.
Preparing to Move/Ship Unit
Please pack the Unit properly by following the Diagram on the
Carton.
1
2
3
4
AC plug
Never use a gas duster on this TV.
The gas trapped inside of this Unit may cause ignition and explosion.
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
WARNING: Batteries (battery pack or battery installed) shall
not be exposed to excessive heat such as sunshine,
fire or the like.
WARNING: To prevent injury, this apparatus must be securely
attached to the furniture / wall in accordance with
the instructions. Tipping, shaking, or rocking the
unit may cause injury / death.
To avoid damage to the Screen, do not pack the stand on the
same side as the TV screen.
5
English
•
Large screen TVs are heavy. 2 people are required to carry and
handle a large screen TV.
Make sure to hold the upper and bottom
frames of the Unit firmly as illustrated.
Install the Unit in a horizontal and stable
position.
Do not install the Unit in direct sunlight
or in a place subject to dust or strong
vibration.
Depending on the environment, the
temperature of this Unit may increase slightly. This is not a
malfunction.
Avoid a place with drastic temperature changes.
Do not place anything directly on top or bottom of the Unit.
Depending on your external devices, noise or disturbance of
the picture and / or sound may be generated if the Unit is
placed too close to them. In this case, please ensure enough
space between the external devices and the Unit.
Do not insert the AC power cord into the power socket outlet
before all the connections are made.
Ensure that you always have easy access to the AC power cord
or plug to disconnect the TV from the power.
Before you move the TV, disconnect attached cables to prevent
damage to connectors.
Be sure to unplug the AC power cord from the AC outlet
before moving or carrying the Unit.
Contents
3 Getting Started
1 Notice .................................................................................... 4
Connecting the Antenna, Cable or
Satellite
2 Important ............................................................................ 5
Positioning the TV
Regulatory Notices
Environmental Care
Downloading an Owner’s Manual
Preparing to Move/Ship Unit
Be sure your Antenna or another Device is connected
properly before plugging in the AC Power Cord.
5
5
5
5
5
If connecting to an Antenna through an RF cable
Any DTV Programs that are Broadcast in your area can be
received for free through an Antenna Connection.
Cable
3 Getting Started ............................................................. 6
Connecting the Antenna, Cable or Satellite
IN
6
OUT
RF cable
4 Use your TV .................................................................... 7
Watching Channels from an External Device
Switching Audio Mode
Changing Picture and Sound Settings
Changing Picture Format
Caption Settings
Child and Ratings Lock
Setting your Location to Home
Viewing Photos and Videos on a USB Memory
Stick
antenna
If connecting a Set-top Box through an HDMI cable
7
7
7
8
9
9
10
If the TV is connected to a Cable / Satellite Set-top Box via
an HDMI cable, make sure you select the correct Source by
using SOURCE key on TV or Remote Control.
RF cable
10
OUT
HDMI cable
5 Install Channels ......................................................... 10
Autoprogram
IN
IN
Set-top box
Connecting a Set-top Box, Blu-ray Disc / DVD
Recorder via Composite Connectors and Analog
Audio
10
6 Troubleshooting ...................................................... 11
Do Not place your Recorder too close to the Screen because
some Recorders can be susceptible to signals from the TV.
7 Specifications ............................................................... 12
Cable
OUT
8 Warranty .......................................................................... 13
RF cable
RF cable
IN
Set-top box
OUT
OUT
Audio (L/R) +
Video cables
OUT
IN
Audio (L/R) +
Video cables
IN
O
●
●
6
IN
Blu-ray disc/DVD recorder
Note(s)
Only the left loudspeaker reproduces sound for mono equipment.
Use a Mono to Stereo adapter (Not Supplied) for sound
reproduction via All internal loudspeakers.
If there is no Input signal and no operation for 15 minutes, the Unit
will turn Off automatically.
4 Use your TV
Changing Picture and Sound Settings
You must set Home in Location. L p. 10
Otherwise, personalized Picture and Sound settings will not
be memorized after the Unit goes into Standby Mode.
Watching Channels from an External
Device
1 Turn On a Set-top Box or the Connected Device.
●
Changing Picture Settings
The picture from the Set-top Box or the Connected Device
might appear Automatically on the TV screen.
If the picture does not appear
① Press SOURCE Repeatedly to select the Set-top Box or the
Connected Device and wait a few seconds till the Picture
appears.
② Use the Remote Control of the Set-top Box or the Connected
Device to select Channels to view.
1
Digital TV Operation
2
Press SAP to display the currently
selected Language and the number of
available Languages.
Press SAP Repeatedly to cycle
through the available Audio Languages.
O
●
●
11.1
English 1/3
2
Note(s)
Available Languages differ depending on the Broadcast.
Other is displayed when the Audio Language cannot be found
or available Languages are other than English, French or Spanish.
Backlight
Contrast
Brightness
Color
Tint
Sharpness
Advanced settings
O
●
*1
*2
7
18
50
30
30
0
2
to select the desired Setting, then press OK
(Personal, Standard, Vivid, Sports, Movie, Game
and Eco)
J Cursor
Press SAP to display the currently selected Audio mode.
While receiving an MTS broadcast,
11
press SAP Repeatedly to cycle
SAP / STEREO
through the available Audio Channels.
Personal
Use HIJK to select the item you want to adjust,
then press OK.
Auto picture
Cable / NTSC (Analog) TV Operation
1
2
Auto picture
Backlight
Contrast
Brightness
Color
Tint
Sharpness
Advanced settings
Cursor K
to Reduce Power
to Increase Power
Consumption and
Consumption and
Brightness
Brightness
to Decrease Contrast
to Increase Contrast
to Decrease
to Increase Brightness
Brightness
to Decrease Color
to Increase Color
Intensity
Intensity
to Add Red
to Add Green
to Soften
to Sharpen
to Select the desired Setting, then press OK.
(Color alignment, Noise reduction,
Ambient light sensor *1, Black stretch,
Dynamic contrast, Gamma, Film mode *1 and
BMR 120 *2)
Note(s)
Adjusts Backlight for the Best Picture Quality by Dynamically
Adjusting the Backlight Intensity in accordance with the Room
Lighting Condition when Ambient light sensor *1 is Set to On.
Please ensure the Room Lighting is Stable and the Light Sensor
is Not Blocked.
Only Models 55ME314V / 50ME314V / 40ME314V /
40ME324V / 39ME313V/F7 A.
Only Models 55ME314V / 50ME314V / 40ME314V /
40ME324V.
Continued on next page.
English
Picture
Sound
Setup
Features
Language
USB
Switching Audio Mode
1
Press MENU and use HI to select Picture, then press OK.
For 16:9 Video signal
Changing Sound Settings
1
Press MENU and use HI to select Sound, then press
OK.
Picture
Sound
Setup
Features
Language
USB
2
Auto sound
Equalizer
DTS TruSurround
Auto volume leveling
TV speakers
Digital output format
Primary MTS
Normal
Standard
On
Off
On
Multichannel
Stereo
Full
(HDMI Device only)
Normal
4:3
Use HIJK to select the item you want to adjust,
then press OK.
Auto sound
to select the desired Setting, then press OK.
(Personal, Standard, Vivid, Sports, Movie,
Music and News)
Equalizer
to select the specific frequency and use HI
to Adjust the Level, then press OK.
DTS
TruSurround
Auto volume
leveling
TV speakers
Digital output
format
Primary MTS
Off
to set DTS TruSurround™ to
Off
On
to set DTS TruSurround™ to
On
Off
to Remove the Auto volume
leveling
On
to Reduce Volume Differences
between the TV Commercials
and the Programs
On
to Output Sound from the
Unit’s Speakers
Off
not to Output Sound from the
Unit’s Speakers
CEC Link
to control Audio Output from
your connected HDMI Link
devices
Movie
expand
Zoom
Wide
to Output PCM Signals.
Stereo
to Output Stereo Audio
Mono
to Output Mono Audio
SAP
to Output Second Audio
Program
Movie expand
Wide
Zoom
Original size.
Shortened horizontally.
Sidebars appear on both edges of the screen.
Vertically stretched to fill the screen.
This only crops out the top of the picture.
Maximum size without changing its horizontal
and vertical ratio.
Horizontally stretched picture.
This crops out the left and right sides of the picture.
For 4:3 Video signal
Normal
16:9
Movie expand
Full can also be selected
after Wide if an HDMI
Device is selected. This
picture format similarly
displays like 16:9.
Full
(HDMI Device only)
Normal
16:9
Movie
expand
to Output Multichannel Signals
(When the Audio of the
Multichannel Content is PCM, it will be
Output in PCM even if
Multichannel is selected.)
PCM
4:3
Full can also be selected
after Wide if an HDMI
Device is selected. This
picture format similarly
displays like Normal.
Zoom
Wide
Wide
Zoom
Original size.
Sidebars appear on both edges of the screen.
Stretched horizontally to fill the screen.
Stretched more vertically at the top of the
screen.
This crops out the top of the picture.
Maximum size that is more vertically stretched to
fill the screen.
This crops out the top and bottom of the picture.
Original size and the edges stretched horizontally
to fill the screen.
For PC Input signal
Normal
Changing Picture Format
●
Display Modes can be Selected when your TV receives a 16:9
or 4:3 Video Signal.
Three types of Display Modes can be Selected for a PC Input
Signal.
Press PICTURE SIZEA Repeatedly to Switch the TV
Aspect Ratio.
●
Unscaled
This Unit can also be connected to your PC that has a DVI Terminal.
Use an HDMI-DVI Conversion Cable for this Video Connection
and it requires a Stereo Mini 3.5mm Plug Audio Cable for Analog
Audio signal as well.
Refer to 16:9 Video Signal on this page if the PC has an HDMI
Output.
Normal
Full
Unscaled
8
Full
Proportionately stretched picture.
Sidebars appear on both edges of the screen.
Stretched out of proportion to fill the screen.
Original size.
Caption Settings
Child and Ratings Lock
Closed Captions displays the Audio portion of the Program as
Superimposed Text over the Video.
1 Press MENU and use HI to select Features, then press
OK.
2 Use HI to Select Caption settings, then press OK.
You can prevent your children from watching certain
Programs or certain Channels by locking the TV Controls and
by using Ratings.
1 Press MENU and use HI to select Features, then press
OK.
2 Use HI to select Child lock, then press OK.
3 Use the NUMBER keys to enter the 4-digit numbers for
your PIN code.
Digital TV Operation
Digital caption service
3
4
Use HI to Select Digital caption service, then press OK.
Use HI to Select the desired Digital caption service, then
press OK.
CS-1 to
CS-6
●
●
Channel lock
Particular Channels or External Input modes can be invisible
in this function.
4 Use HI to Select Channel lock, then press OK.
5 Use HI to Select the Particular Channels or External
Input, then press OK Repeatedly to Switch between
View and Block.
Select one of these before changing any other item in
Caption settings menu. Choose CS-1 under normal
conditions.
Cable/NTSC(Analog) TV Operation
Caption service
Use HI to Select Caption service, then press OK.
Use HI to Select the desired Caption service, then press
OK.
CC-1 and
T-1
The primary Closed Captions and Text Services. The Closed
Captions or Text is Displayed in the same Language as the
Program’s Dialog (up to 4 lines of script on the TV Screen).
CC-3 and
T-3
Serve as the preferred Data Channels. The Closed Captions
or Text is often a Secondary Language.
CC-2,
CC-4, T-2
and T-4
Rarely available and Broadcasters use them only in Special
conditions, such as when CC-1 and CC-3 or T-1 and T-3
are not available.
● There are 3 Display modes according to Programs:
Displays Characters on the TV screen
Paint-on
immediately.
Once Characters are Stored in Memory,
Pop-on
they are Displayed All at Once.
Displays the Characters Continuously by
Roll-up
Scrolling (max. 4 lines).
●
●
Setting US Movie and TV Ratings
US Movie Ratings Lock is the Rating System created by
MPAA.
US TV Ratings Lock has Controlled Access to Individual
Programs based on their Age and Content rating.
4 Use HI to Select US movie ratings lock or US TV
ratings lock, then press OK.
5 Use HI to Select the Desired Rating, then press OK
Repeatedly to Switch between View and Block.
●
●
●
●
●
●
US TV
ratings
All
You can choose the Font (Size, Color, etc), Background and other
Characteristics of the Closed Captions Text.
3 Use HI to Select Caption style, then press OK.
4 Use HI to Select User setting, then press OK.
5 Use HI to Select On, then press OK.
6 Use HI to Select an Item and press OK, then use HI to
select the Desired Setting and press OK.
●
For US TV Ratings, you can further set the Sub Ratings to Block
Specific Elements within Programs.
G or F indicates that the Rating is Locked.
E indicates that the Rating is Not Locked.
US Movie
ratings
Caption style
O
G indicates that the Channel or Input Source is Locked.
E indicates that the Channel or Input Source is Not Locked.
NR
–
–
G
PG
PG-13
–
–
TV-14
R
–
NC-17
X
–
TV-MA
Note(s)
Closed Captions Service may not be controlled by this Unit’s Menu
options if you are watching television through an External Cable or
Satellite Set-top Box. In which case you will need to use the Menu
options on the External Set-top Box to control Closed Captions.
The Captions do not always use correct Spelling and Grammar.
Not all TV Programs and product Commercials include Closed
Captions information. Refer to your area TV Program Listings for the
TV Channels and times of Closed Caption shows. The Closed
Captions Programs are usually noted in the TV Listings with Service
Marks such as CC.
Not all Closed Captions Services are used by a TV Broadcaster during
the Transmission of a Closed Caption Program.
The EUT setting that satisfies § 79.102 (e) is as follows:
– Font: Mono-font
– Character Size: Large
None
TV-Y
TV-Y7
TV-G
TV-PG
Description
All Ratings Locked including No Rating
No Rating
Appropriate for All Children
Appropriate for All Children 7 and Older
General Audience
Parental Guidance Suggested
Unsuitable for children under 13
Unsuitable for children under 14
Restricted under 17 Requires
Accompanying Parent or Adult Guardian
No One under 17 Admitted
Mature Audience Only
Canadian English or Canadian French Ratings
You can select the Rating for Canadian English or Canadian
French broadcasting.
4 Use HI to Select Canadian English rating or Canadian
French rating, then press OK.
5 Use HI to Select the Desired Rating, then press OK
Repeatedly to Switch between View and Block.
●
●
9
G indicates that the Rating is Locked.
E indicates that the Rating is Not Locked.
Continued on next page.
English
3
4
When you have not set up your PIN code, enter 0, 0, 0, 0.
When the PIN code is correct, Child lock menu is displayed.
Canadian
English rating
Canadian
French rating
All
E
C
C8+
–
–
G
–
PG
–
14+
–
18+
O
●
8ans+
–
13ans+
–
16ans+
18ans+
2
Description
●
Locked All Ratings
Exempt Program
For All Children
For Children over 8
General Audience
Unsuitable for Ages under 8
Parental Guidance Suggested
Unsuitable for Ages under 13
Unsuitable for Ages under 14
Unsuitable for Ages under 16
Adult Audience Only
Video
(Motion
JPEG)
O
●
●
●
The V-Chip can Block Non Rated Programs as per “CEA-608-E
sec. L.3”. If the Option to Block NR, None or E Programs are
used in US movie ratings lock, US TV ratings lock, Canadian
English rating or Canadian French rating accordingly “unusual
results may occur and the Unit may not Receive Emergency
Bulletins or other Types of Programming”: / Emergency Bulletins
(Such as EAS messages, Weather Warnings and Others) / Locally
originated Programming / News / Political / Public Service
Announcements / Religious / Sports / Weather.
●
●
●
You can set the Location of your TV to Home or Retail.
Choosing Home gives you full flexibility to change predefined
settings for Picture and Sound.
1 Press MENU and use HI to select Features, then press
OK.
●
30fps
Audio type
Sampling frequency
LPCM (32 kHz, 44.1 kHz or 48 kHz)
Quantization bit rate (16 bit)
Autoprogram
Be sure the RF cable is correctly connected to this Unit and
you are registered with your Cable TV provider when you
Install Cable channels.
1 Press MENU and use HI to select Setup, then press
OK.
2 Use HI to Select Autoprogram, then press OK.
●
Home
--
3
If you run Autoprogram when you have Locked Channels, a
Message appears asking to enter your PIN. Enter your PIN in
order to Complete the Installation. You need to set the
Channel Lock again after the Installation.
Use HI to Select an appropriate Option, then press
OK.
–
Note(s)
When Antenna is selected, the TV Detects Any Off-the-Air
Antenna Signals. It searches for ATSC (Digital) and NTSC
(Analog) Channels available in your Area.
When Cable is selected, the TV Detects Signals supplied by
Cable. It searches for ATSC (Digital), NTSC (Analog) and
Cable Channels available in your Area.
Picture
Sound
Setup
Features
Language
USB
You must set Home in the Menu. Otherwise, personalized
Picture and Sound Settings will Not Be Memorized after the Unit
goes into Standby Mode.
Viewing Photos and Videos on a USB
Memory Stick
Auto program will rescan all channels.
Auto programming may take more
than 20 minutes to complete.
Back
Antenna
Cable
Select your signal source.
Antenna
Cable
Your TV is fitted with a USB connection that enables you to view
Photos or Videos (Motion JPEG files) stored on a USB Memory
Stick.
1 Press MENU and use HI to select USB, then press OK.
●
Frame rate
We cannot be held responsible if your USB Memory Stick is Not
Supported, nor will we accept any liability for damage or loss of stored
data.
The USB Memory Stick is Not Supplied with this TV.
A file name exceeding 128 characters or contains a dot character is
Not Supported on this TV.
Progressive JPEG files are Not Supported.
Only a Motion JPEG file with an “.avi” extension is supported. An
extension “.mov” is Not Supported.
During Motion JPEG playback, “Pause”, “Forward” and “Reverse” Do
Not Work on this Unit.
Use HI to Select Location, then press OK.
Use HI to Select Home, then press OK.
O
24M pixel
320 x 240 (QVGA)
Note(s)
–
2
3
Upper limit
Size
5 Install Channels
Setting your Location to Home
Caption settings
Child lock
PC settings
fun-Link(HDMI CEC)
Location
E-sticker
Software upgrade
These Recorded Files must meet Specifications shown below:
Picture
(JPEG)
Note(s)
Picture
Sound
Setup
Features
Language
USB
Use HI to Select the Picture or Video, then press OK.
Or
ANTENNA IN
●
The Highlighted Text will move to Start now, then press OK again.
4
10
When the Scanning and Memorizing of Available Channels is
Completed, the Lowest Memorized Channel will be
Displayed.
Follow the On-screen Instructions to Complete the
Installation.
6 Troubleshooting
If the Unit does Not Perform Properly when Operated as Instructed in this Manual,
check the following Troubleshooting Tips and All Connections Once before calling for Service.
Adjusted Picture or Sound settings are not effective every time the Unit
is turned On.
You must set to Home in Location. L p. 10 (Otherwise, the Settings
you adjusted will not be memorized after the Unit goes into Standby
Mode.)
You see a Distorted Picture or Hear an Unusual Sound.
● You may be getting NTSC (Analog) TV signal (not HDTV signal)
interference from electrical appliances, automobiles, motorcycles or
fluorescent lights.
● Try moving the Unit to another Location to see if this is the Cause of the
Problem.
Ghosts, lines or streaks in picture. (Analog TV- NTSC signal)
● Electrical interference from nearby appliances may affect picture quality.
Power
No Power
● Make sure that the AC outlet supplies the proper voltage, plug another
electrical appliance into the AC outlet to ensure that the AC outlet
operates normally.
● If a Power Failure occurs, Unplug the AC Power Cord for 1 minute to
allow the Unit to Reset Itself.
Remote
Remote Control keys or Remote itself does Not Work.
● Do NOT press more than one key at the same time.
● Ensure that no keys on the Remote Control are depressed and move
freely.
● Re-insert the Batteries with their Polarities (+/–) as indicated.
● When there is an Infrared-equipped device near this Unit, it may interrupt
the Remote Control Signal of this Unit.
● Make sure that Nothing is Blocking the Unit's Remote Control Sensor
and the Remote Control is Pointed at this Remote Control Sensor.
● Press and Hold any Key on Remote Control toward a Digital or Cell
Phone Camera. The Remote Control is working if you confirm a Flashing
Infrared Light through the Camera. Some Dual Camera Cell Phones may
have an IR Filter in one of the Cameras.
Universal Remote Control does not work properly.
● Refer to the User Manual of the Universal Remote Control for the
MAGNAVOX code.
Picture
Power is On but No Screen Image.
● Check whether the Connection of the Antenna, Cable or Satellite Settop Box is Connected Correctly.
● Check whether All the Cables to the Unit are connected to the correct
Output Jack on your separate Device like Blu-ray Disc / DVD Recorder.
● Make sure that the selected Input mode is connected to the working Input
jack.
● Check if your computer is NOT in Sleep Mode when the Input Mode of
this Unit is in PC mode. Tap any Key on the Computer Keyboard to Wake
it up.
No Color
● Adjust Color in Picture settings. L p. 7
Picture Poor, Sound OK
● Electrical Interference from nearby appliances may affect Picture quality.
● Adjust Contrast and Brightness in Picture Settings. L p. 7
● For the Best Picture quality, watch “High Definition” wide screen
Programs. If the HD content is not available, watch “Standard Definition”
Programs instead.
You see Noise or Trash on the Screen.
● When the capabilities of the Unit exceed the capabilities of the Digital
Broadcasting, the signal will be increased to match the capabilities of the
Display on the Unit. This may cause Noise or Trash.
Unusual picture appears and the TV does Not Operate.
● Press the Power Key first. If it Does Not Solve the Problem, then Press
the Keys on the Remote Control in the Order shown below to change
the Unit to the Live Mode.
SLEEPLPICTURE SIZEALKLHLILB
●
Child and Rating Lock
PIN code does not work.
● If a power failure occurs for longer than 10 seconds the child lock setting
is retained, but the PIN code is set to the default code 0000. Refer to
Child and Ratings Lock. L p. 9
Screen
You Switch to a different Input and the Screen Size changes.
● This Unit will Memorize the Viewing Mode from the last time you used
those Particular Input Modes.
The Display image does not cover the entire Screen.
● If you are using the Unit as a PC Monitor, make sure that Horizontal
position and Vertical position in PC settings are set correctly.
● If you are watching TV or using the Composite Video, Component Video
or HDMI with 480i Input, press PICTURE SIZEA Repeatedly to Switch
to various Screen Modes.
Closed Captions
Closed Captions are displayed as a white box. No Closed Captions are
displayed in the Closed Caption-Supported Program.
● Interference from buildings or weather conditions may cause Closed
Captions to be incomplete if watching Analog TV signals.
● Broadcasting Station may shorten the program to insert advertisements.
● The Closed Captions Decoder cannot read the information of the
shortened program.
● Closed Captions that are delayed a few seconds behind the actual dialog
are common for Live broadcasts. Most captioning production companies
can display a dialog to maximum of 220 words per minute. If a dialog
exceeds that rate, selective editing is used to insure that the Closed
Captions remain up-to date with the current TV screen dialog.
Black Box is displayed on the TV Screen.
● The Text mode is selected. For Closed Captions, select CC-1, CC-2,
CC-3, CC-4 or Off.
Picture & Sound
No Picture or Sound
● View other TV channels. The problem might be limited to the
Broadcasting Station or Weak Signal Strength.
● Unplug the AC Power Cord and wait for about 1 minute, then Plug the
AC Power Cord and turn On the Unit again.
● Autoprogram must be completed when you Set Up the Unit for the First
time or Move it to a location where previously unavailable channels are
broadcast.
● The selected Channel cannot be viewed by the Child and Ratings Lock
Setting. L p. 9
● The Unit requires some kind of Input Signal. A Digital Indoor Antenna
(VHF / UHF), a Digital External Antenna (VHF / UHF) or an RF coaxial
cable from your Wall or Cable/Satellite Set-top Box signal (HDMI,
Component+Audio or Composite [Video+Audio]) needs to be
connected to the Unit.
O
●
●
11
Note(s)
The LCD screen is manufactured to provide many years of useful life.
Occasionally a few non active pixels may appear as a fixed point of blue,
green or red.
This is Not to be considered a Defect in the LCD screen.
Some Functions are not available in Specific Modes, but this is Not a
Malfunction. Read the Description in this Manual for more Details on
Correct Operations.
English
Sound
No Sound, Distorted Sound or Incorrect Audio Sound is heard when
using the HDMI-DVI connections.
● Make sure that the Analog Audio signals from the HDMI-DVI device are
connected to the Analog Audio Input L/R jacks.
● When using Component Analog Video, Composite Analog Video or PC
VGA Video make sure that the Analog Audio (L/R) connectors are
Mounted into the Audio (L/R) Input jacks.
Sound Poor, Picture OK
● Check if the Audio Cable is connected into the Unit correctly.
You Switch to a Different Input and the Volume Changes.
● This Unit will Memorize the Volume Level from the last time you adjusted
it.
● If the Volume of the Sound from another Device is Higher or Lower, then
the Loudness will Change.
● Make sure Auto volume leveling is set to On. L p. 8
7 Specifications
Model #
55ME314V
50ME314V
40ME314V
40ME324V
39ME313V/F7 A
32ME304V
28ME304V
Picture
Type
FHD (1920 x 1080 pixels 60Hz)
WXGA (1366 x 768 pixels
60Hz)
Aspect Ratio
16:9
178° (V) by 176° (V) by 176° (H)
178° (H)
ATSC (Digital) / NTSC (Analog)
178° (V) by 178° (H)
Viewing Angles
Built-in Digital / Analog Tuner
Sound
Mono / Stereo
Power Output (RMS watts)
Equalizer
Ease of Use
Picture Format
Photo Slide Show
Video Playback
Channel
Mono, Stereo, DTS TruSurround™
10W x 2
8W x 2
5 Band
SD (4:3 Source)
HD (16:9 Source)
HDMI AV (4:3 Source)
HDMI AV (16:9 Source)
PC Source
CATV (Analog NTSC)
Tuning System
Channel Access
Normal / 16:9 / Movie expand / Zoom / Wide
Normal / 4:3 / Movie expand / Zoom / Wide
Normal / 16:9 / Movie expand / Zoom / Wide / Full
Normal / 4:3 / Movie expand / Zoom / Wide / Full
Normal / Full / Unscaled
(Refer to HDMI AV (16:9 Source) above if PC has HDMI Output.)
JPEG Files Only
Only Motion JPEG 320 x 240, 30 fps with file extension "avi" will Playback.
Terrestrial DTV (ATSC)
Channel Coverage
:
:
:
:
:
Terrestrial Analog (NTSC)
: VHF: 2~13
UHF: 14~69 (Each Channel has e.g. 2.1~2.9, 3.1~3.9, etc)
: VHF: 2~13
UHF: 14~69
2~13, A~W
W+1~W+94 (Analog W+1~W+84), A-5~A-1, 5A
Channel Frequency Synthesized Tuning System
Direct Access Number Keyboard,
Programmable Scan, Channel +(up) / −(down) and PREV. CH (Previous Channel)
Connectivity
Component Video Input
(Y/Pb/Pr)
Composite Video Input
(Shared Y Green Terminal with
Component Video)
1
Supporting Video Signals : 480i/p, 720p, 1080i @60Hz
1
3
Supporting Video Signals : 480i/p, 720p, 1080i @60Hz, 1080p @24/30/60Hz
HDMI Input
PC-Input Signal up to FHD (1920 x 1080)
Analog Audio L/R Input
PC Input
USB
Digital Audio Output
Headphone Output
1
via VGA, HDMI and HDMI-DVI + Analog Audio L/R
1
1
Supporting Dolby Digital
1
1/8 inch (3.5mm)
Power
●
Power Requirements
Temperature
120V~ +/− 10%, 60Hz +/− 0.5%
Operating Temperature
41 °F (5 °C) to 104 °F (40 °C)
Specifications are Subject to Change without Prior Notice.
12
PC-Input Signal up to
WXGA
(1360 x 768)
8 Warranty
LIMITED WARRANTY
ONE (1) YEAR PARTS AND LABOR
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-supplied product,
(b) to damage caused by service performed by anyone other than
company approved Authorized Service Location, (c) to a product
or a part that has been modified without written company
permission, or (d) if any serial number has been removed or
defaced, or (e) product, accessories or consumables sold “AS IS”
without warranty of any kind by including refurbished product
sold “AS IS” by some retailers.
WARRANTY COVERAGE:
This warranty obligation is limited to the terms as set forth
below.
WHO IS COVERED:
This product warranty is issued to the original purchaser or the
person receiving the product as a gift against defects in materials
and workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements can
result in delay.
WHAT IS NOT COVERED - EXCLUSIONS AND
LIMITATIONS:
This Limited Warranty applies only to new company
manufactured products that can be identified by the trademark,
trade name, or logo affixed to it. This Limited Warranty does not
apply to any hardware product or any software, even if packaged
or sold with the product, as manufacturers, suppliers, or
publishers may provide a separate warranty for their own
products packaged with the bundled product.
TO OBTAIN ASSISTANCE…
Contact the Customer Care Center at:
1 866 341 3738
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE
CONSUMER, WITH THE ISSUING COMPANY NOT LIABLE
FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY
ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED
BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO
THE DURATION OF THIS WARRANTY.
The company is not liable for any damage to or loss of any
programs, data, or other information stored on any media
contained within the product, or other additional product or part
not covered by this warranty. Recovery or reinstallation of
programs, data or other information is not covered under this
Limited Warranty.
Some states do not allow the exclusions or limitation of incidental
or consequential damages, or allow limitations on how long an
implied warranty lasts, so the above limitations or exclusions may
not apply to you.
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
FUNAI CORPORATION, Inc. 19900 Van Ness Avenue, Torrance, CA 90501
13
English
This Limited Warranty does not cover:
• Shipping costs for returning defective product.
• Labor charges for installation or setup of the product, adjustment
of customer controls on the product, and installation or repair of
antenna/signal source systems outside of the product.
• Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or
screen markings resulting from viewing fixed stationary
content for extended periods, product cosmetic appearance
items due to normal wear and tear, unauthorized repair or
other cause not within the control of the company.
• Damage or claims for products not being available for use, or
for lost data or lost software.
• Damage from mishandled shipments or transit accidents when
returning product.
• A product that requires modification or adaptation to enable it
to operate in any country other than the country for which it
was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
• Product lost in shipment and no signature verification receipt
can be provided.
• Failure to operate per Owner’s Manual.
WHAT IS COVERED:
This warranty covers new products if a defect in material or
workmanship occurs and a valid claim is received within the
Warranty Period. At its option, the company will either (1) repair
the product at no charge, using new or refurbished replacement
parts, or (2) exchange the product with a new or refurbished
product at company’s option.
Replacement products or parts provided under this warranty are
covered against defects in materials and workmanship from the
date of the replacement or repair for ninety (90) days or for the
remaining portion of the original product’s warranty, whichever
provides longer coverage for you. When a product or part is
exchanged, any replacement item becomes your property and the
replaced item becomes company property. When a refund is
given, your product becomes company property.
Note: Any product sold and identified as refurbished or renewed
carries a ninety (90) day limited warranty.
FUNAI CORPORATION, Inc.
19900 Van Ness Avenue, Torrance, CA 90501
Printed in China
A4GR1UH / A4GU6UH / A4G21UH
2EMN00150A 䖩䖩䖩䖩
*2EMN00150A*
* 2 E M N 0 0 1 5 0 A *
Download PDF