Anko FH118 Fan Heater User Manual

The ANKO FH118 is a versatile fan heater designed for indoor use. With adjustable thermostat control, you can easily reach your desired temperature. It features three heat settings (800W, 1200W, and 2000W) and a fan-only mode for year-round use. Additionally, it includes safety features like an overheat protection system and tip-over switch that automatically shuts off the device for added peace of mind.

PDF Download
Document
ANKO FH118 Fan Heater User Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Adjustable thermostat
  • 3 heat settings
  • Fan-only mode
  • Overheat protection
  • Tip-over safety switch

Frequently asked questions

Press down on the air-inlet grille to unlock and remove it. Gently remove the filter, clean it with a soft brush or vacuum cleaner, and reassemble.

The heater will automatically switch off. To reset it, turn off the thermostat, disconnect the power cord, ensure the vents are clear of obstructions, and let it cool for 25 minutes. Then reconnect and turn it back on.

No, this heater is not intended for use in bathrooms, laundry areas, or other damp locations.
Preparing document for printing…
0%