Meriam Instrument 1500 SMART Specifications

FEATURES
DESCRIPTION
MODELS / EXTRAS
1
M-10
MVP-600
Hydraulic Calibration
Hand Pump
Pneumatic Calibration
Combination Hand Pump
Range: 0-10,000 PSI (700 Bar)
Compatible with most hydraulic fluids, oils, H2O
Connections: 1/4” NPT/BSP
2 Year Quibble-Free Warranty
Weight: 3 lbs
Range: Vacuum 28"Hg to Pressure 600 PSI (40 Bar)
Compatible with all gauges and calibrators
Connections: 1/4” and 1/8” NPT/BSP
2 Year Quibble-Free Warranty
Weight: 2 lbs
Utilizes a fully adjustable stroke control for quick priming,
easy pumping, and fast pressure generation up to 10,000
psi (700 bar). The ergonomic handles provide extra comfort
and reduce hand fatigue. The patented triple filtration
system ensures pump operation in dirty conditions. The
shatterproof reservoir and stainless steel construction
guarantee leak free operation. The pump has over-sized
check valves to provide smooth controlled operation. It
uses a patented protective cage around the vent knob to
prevent damage when dropped.
Produces pneumatic pressure and vacuum to check
calibration of gauges, switches, transmitters, and
recorders. The contoured cushioned handles provide extra
comfort while preventing the pump from sliding. The
over-sized check valve provides smooth operation
throughout the output range while the dual o-rings on all
pistons ensure zero leakage. Patented Mash proof vent
valve comes standard on all MVP-600s (No Needle Valve)
and a non-oil based lubricant is used on all moving parts.
M-10.............................................................................$999
M-10KT......................................................................$1,099
includes Pump, a black padded canvas case
embroidered with orange thread, 3ft high pressure
hose, fittings, 3 filters, test point, adaptor, and fluid
bottle.*
M-10WIN...................................................................$2,189
includes everything in the M-10KT plus Winchester
Engineering Model 1 Auto Ranging Digital Gauge™ w/
N.I.S.T. certification and versatile hook.*
M-10WIN-FIT.............................................................$2,689
includes everything in the M-10WIN plus FasTest
universal quick connect kit and coupler for Swagelok
tube fittings.*
M-10RK........................................................................$150
Rebuild Kit for M-10.
MVP-600.......................................................................$699
MVP-600KT...................................................................$797
includes Pump, a black padded canvas case
embroidered with orange thread, 2ft non-stretch hose,
fittings, additional rubber bonded washers and (2)
adaptors.
MVP-600WIN............................................................$1,779
includes everything in the MVP-600KT plus Winchester
Engineering Model 1 Auto Ranging Digital Gauge™ w/
N.I.S.T. certification and versatile hook.*
MVP-600WIN-FIT.......................................................$2,279
includes everything in the MVP-600WIN plus FasTest
universal quick connect kit and coupler for Swagelok
tube fittings.*
MVP-600RK..................................................................$125
Rebuild Kit for MVP-600.
*Note: Kits, hoses, and fittings can be customized upon request.
*Note: Kits, hoses, and fittings can be customized upon request.
Call us at 1-800-921-9494 or visit www.easthillsinstruments.com
Pressure • Vacuum
Calibration Pump
Range: Near absolute vacuum (30”Hg to 80 PSI)
Resolution - 0.0001 PSI
Bench Mountable
2 Year Quibble-Free Warranty
Weight: 3.5 lbs
Range: 0 PSI to 100 PSI (7 Bar) | 28"Hg to 0 PSI
Compatible with all gauges and calibrators
Connections: 1/8” NPT/BSP
2 Year Quibble-Free Warranty
Weight: 1 lb
Capable of extremely high resolution (0.0001 psi) as it spans
the range of near absolute vacuum to low pressures (30"
Hg to 80 psi). It's rugged outer housing and dual o-ring
design ensures zero leakage. Not only is the M-80 bench
mountable, but it’s relative light weight (3.5 lbs) makes it
perfect for field use as well. Optional power drive supplied
to rotate the vernier at a quicker pace in-order to speed up
your calibrations.
Features a Delrin® plastic handle that prevents body heat
transfer from interfering with readings, as well as an
oversized check valve for smooth operation. The dual
o-rings on all pistons ensure zero leakage. MP-P and MP-V
have been in service for over 10 years and can now be
found in over one third of all power plants. Both models
will out perform any manufactured pump in it's category.
M-80..........................................................................$1,350
M-80KT .....................................................................$1,497
includes Pressure Chamber, ball valve, (2) 2ft
non-stretch hoses w/ fittings, a portable handheld
power drive, rechargeable lithium battery, and charger.
M-80WIN ..................................................................$2,546
includes everything in the M-80KT plus Winchester
Engineering Model 1 Auto Ranging Digital Gauge™
(absolute vacuum to 3K PSI) w/ N.I.S.T. certification.
M-80TH .....................................................................$3,447
includes everything in the M-80KT plus a Thommen®
differential pressure calibrator (0.1% accuracy full scale
with a resolution of 0.001” H2O differential).
MP-P | MP-V.................................................................$399
MP-PKT | MP-VKT.........................................................$497
includes Pump, a black padded canvas case
embroidered with orange thread, 2ft non-stretch hose,
fittings and Winchester Engineering M-2 stainless steel
2.5” analog gauge w/ protective rubber boot.*
MP-PKT-FIT | MP-VKT-FIT.............................................$996
includes everything in the MP-PKT | MP-VKT plus FasTest
universal quick connect kit and coupler for Swagelok
tube fittings.*
+HK-1...........................................................................+$49
adds a 2ft non-stretch hose kit w/ fittings for side port
to any model.*
MP-PRK | MP-VRK.........................................................$98
Rebuild Kit for MP-P or MP-V.
MODELS / EXTRAS
Magnum Low Pro Volume
Pressure Chamber
DESCRIPTION
MP-P | MP-V
FEATURES
M-80
*Note: Kits, hoses, and fittings can be customized upon request.
Call us at 1-800-921-9494 or visit www.easthillsinstruments.com
2
PATENT PENDING
PP-4
Magnum Pro
Pneumatic Power Pump
Magnum Pro
DESCRIPTION
PATENT PENDING
• 0 to 4,000 PSI
• Light weight
• Easy to set up
• No heavy nitrogen bottles necessary
• No contamination of process system with oils and water
• Won’t freeze in low temp from water intrusion
• Can operate with a remote control (manifold)
• Can be used on a bench or taken out to the field
• 2 Year “Quibble-Free” warranty
Pneumatic Power Pump
FEATURES
Fluids in a transmitter or delicate system have always been a concern. Magnum Pro introduces the only fully versatile high pressure pneumatic pump capable of generating pressure up to 4,000
psi without liquid or the use of nitrogen. Two support legs fold
out to stabilize the pump so it can be operated by either foot or
hand. No other pump offers our patented optional manifold
system to allow a person to pump, control, & vent the pressure
while standing. The vernier allows the pressure to be finely
adjusted and sealed off to dial into the desired pressure.
MANIFOLD (KT Version) w/
MODEL1 Gauge (KT-WIN Version)
Why the Magnum Pro Power Pump?
• Exremely light weight and compact. 40% lighter than
its competition.
• Folding arms and carrying handle.
• Generating pressure with foot pedal provides
comfortable upright operation with much less effort.
MODELS / EXTRAS
Aerial View w/ Legs Deployed
Bottom / Back Without Handle
3
Top / Front With Handle
PP-4...........................................................................$2,999
PP-4KT.......................................................................$3,899
includes Pump, Manifold, (2) 5ft high pressure hose,
fittings.
PP-4WIN....................................................................$4,875
includes everything in the PP-4KT plus Winchester
Engineering Model 1 Auto Ranging Digital Gauge.
PP-4WIN2..................................................................$4,889
includes everything in the PP-4KT plus Winchester
Engineering Model 2 Wide Range Digital Gauge.
Call us at 1-800-921-9494 or visit www.easthillsinstruments.com
Regular & High Pressure
Calibration Hoses
All fittings are rated to 5,000 psi (some 10,000 psi)
Fast Connection: Twist hand tight, no tools, no tape
Eliminate thread damage to instruments
Minimize contamination to process media
All fittings are made of stainless steel
Custom sizes by request
10,000 psi working pressure
32,000 psi burst pressure
Pneumatic & hydraulic applications
Small in diameter (3/16" OD)
High Pressure Hose made of Kevlar & Steel
Any length & any fitting configuration
In calibration, there has always been a need to make a fast,
non-destructive and reliable connection. Leaks, re-taping,
and re-tightening become time consuming. The FasTest
fitting was developed for volume production of
refrigeration components, where only seconds are
allowed for connection, pressurization, and testing.
Magnum Pro calibration hoses are flexible, leak proof and
stabilize quickly without stretching. The provided swivel
fittings prevent kinking and will work with any calibrator,
gauge or pump part. You can fully customize your length
or fittings to make the Magnum Pro hoses positively the
best connection you could have! Swagelok ends available.
Any connection is made without tape and without tools.
Stripped transmitters and fittings become a thing of the
past. These fittings are probably the most cost effective
product in the instrument or calibration shop.
The options for fittings are: 1/8 NPT male, 1/8 NPT female,
1/4 NPT male, 1/4 NPT female, 1/4 mini-mess female,
swagelok tube male.
F-15................................................................................$89
A 1/4” IEC thread specifically for use with the recessed
hole in transmitters.
F-16................................................................................$74
Attaches to transmitters after nut and ferrule is
removed.
F-17................................................................................$77
For 1/4” NPT internal (female) threads.
F-18................................................................................$55
For 1/8” NPT external (male) threads.
F-19................................................................................$55
For 1/4” NPT external (male) threads.
F-20................................................................................$77
For 1/8” NPT internal (female) threads.
F-22 (Kit)......................................................................$499
FasTest universal quick connect kit includes all of the
above fittings inside a hard yellow carrying case.
HK-1...............................................................................$49
2’ Standard Hose for MP-P & MP-V.
1/8” NPT male x 1/8” NPT female.
HK-600...........................................................................$78
2’ Standard Hose for MVP-600 & M-80.
1/8” NPT male x 1/4” NPT female.
HK-HP...........................................................................$189
3’ High Pressure Hose.*
The HP Hoses are available in the following FITTINGS:
mini mess female
1/8” NPT male
1/8” NPT female
1/4” NPT male
1/4” NPT female
MODELS / EXTRAS
Individual Swivel Style
& FastCal Fittings
INCLUDES
HK
DESCRIPTION
F-15 - F-22
TP-4................................................................................$38
Test point 1/4” - connects to mini mess fitting.
*Note: Please add $20 per extra foot.
Call us at 1-800-921-9494 or visit www.easthillsinstruments.com
4
MODEL 1
MODEL 2
Auto Ranging
Digital Gauge™
Wide Range
Digital Gauge
FEATURES
Accuracy: 0.1% of reading from absolute zero to 3,000 psi
Units: psi, Bar, psia, inches of H2O, inHg, mmHg, Absolute
Temperature Compensation: 0-50°C (32-120°F)
Connections: 1/4” NPT Male
2 Year Quibble-Free Warranty
Weight: 2 lbs
Accuracy: 0.05% of full scale from 0 to 10,000 psi
Units: psi, Bar
Temperature Compensation: -10-50°C (14-122°F)
Connections: 1/4” NPT Male
2 Year Quibble-Free Warranty
Weight: 2 lbs
DESCRIPTION
The Model 1 will replace the need to use many gauges of
different ranges to achieve and maintain high accuracy.
Model 1 also functions as an absolute pressure gauge. The
auto-ranging technology uses multiple piezoresistive
sensors to read the entire range using just one gauge
where it would otherwise require up to seven of our closest
competitors digital gauges. Certification costs are lowered
by reducing the number of gauges. It’s rugged, shockproof
design comes equipped with a protective rubber housing.
Large, easy-to-read, one-line display with vibrant backlight
is perfect for any light condition.
Like the Model 1, the Model 2 will replace the need to use
many gauges of different ranges to achieve and maintain
high accuracy (0.05% f.s.) throughout a wide span (2,50010,000 psi). The need for multiple gauges is eliminated. The
Model 2 is explosion proof and fully temperature compensated. It has a large, vibrant one line display. It is housed in
a high impact, sturdy case with an optional rubber boot for
additional protection. Model 2 runs on three AA batteries.
This gauge is destined to become the standard of the
industry!
MODELS / EXTRAS
MODEL 1......................................................................$999
MODEL 1KT...............................................................$1,197
includes Gauge, NIST certification, case, versatile hook.
MVP-600WIN............................................................$1,779
includes Gauge, versatile hook, MVP-600 Pump, a black
padded canvas case embroidered with orange thread,
2ft non-stretch hose, fittings, additional rubber bonded
washers and (2) adaptors.
M-10WIN...................................................................$2,189
includes Gauge, versatile hook, M-10 Pump, a black
padded canvas case embroidered with orange thread,
3ft high pressure hose, fittings, 3 filters, test point, and
fluid bottle.
M-80WIN ..................................................................$2,546
includes Gauge, M-80 Pressure chamber, (2) hoses,
fittings, a portable handheld power drive, rechargeable
lithium battery and charger.
MODEL 2......................................................................$999
MODEL 2KT...............................................................$1,124
includes Gauge, NIST certification, rubber boot, case.
M-10WIN2.................................................................$2,149
includes Gauge, M-10 Pump, a black padded canvas case
embroidered with orange thread, 3ft high pressure
hose, fittings, 3 filters, test point, and fluid bottle.
PP-4WIN2..................................................................$4,889
includes everything in the PP-4KT plus Winchester
Engineering Model 2 Wide Range Digital Gauge.
5
Call us at 1-800-921-9494 or visit www.easthillsinstruments.com
+$49 Rubber Boot
4”
Analog Gauge
2.5”
Analog Gauge
Accuracy: 0.5% Accuracy full Scale (ANSI Grade 2A)
All Stainless Steel with Rubber Boot
Liquid Fillable
Connections: 1/4” NPT Male
2 Year Quibble-Free Warranty
Weight: 1 lb
Accuracy: 0.5% Accuracy full Scale (ANSI Grade 2A)
All Stainless Steel with Rubber Boot
Liquid Fillable
Connections: 1/4” NPT Male
2 Year Quibble-Free Warranty
Weight: Under 1 lb
The M-4 analog gauge comes in a variety of display sizes
and ranges to suit your exact needs. The protective rubber
boot will ensure it the best protection from the rugged use
in heavy duty industrial environments.
The M-2 analog gauge comes in a variety of display sizes
and ranges to suit your exact needs. The protective rubber
boot will ensure it the best protection from the rugged use
in heavy duty industrial environments.
Its face is made of laminated safety glass and the pointer
is adjustable. It is hermetically sealed and weather proof.
All wet parts are 316SS.
Its face is made of laminated safety glass and the pointer
is adjustable. It is hermetically sealed and weather proof.
All wet parts are 316SS.
+$50 NIST Calibration Certificate
+$35 Glycerin Filled
All models are available in the following RANGES:
30” -0 hg vac
30” -0-15
30” -0-30
30” -0-60
30” -0-100
30” -0-150
30” -0-200
30” -0-300
30” -0-600
0-15 psi
0-30 psi
0-60 psi
0-100 psi
0-160 psi
0-200 psi
0-300 psi
0-400 psi
0-600 psi
0-800 psi
0-1,000 psi
0-1,500 psi
0-2,000 psi
0-3,000 psi
0-5,000 psi
MODELS / EXTRAS
M-2 Analog Gauge.........................................................................................................................................................$125
2.5” display.
M-4 Analog Gauge..........................................................................................................................................................$145
4” display with protective boot.
M-6 Analog Gauge..........................................................................................................................................................$195
6” display with protective boot.
DESCRIPTION
M SERIES
FEATURES
M SERIES
0-10,000 psi
0-15,000 psi
0-20,000 psi
Call us at 1-800-921-9494 or visit www.easthillsinstruments.com
6
HART Communicator
Smart Manometer
FEATURES
Reads manufacturers DDs in their native format
Enhanced 4.3” diagonal anti-glare touchscreen
Ergonomic, handheld design
Operating temp: 14 to 122°F (-10 to 50°C)
480 X 272 pixels display
Full QWERTY keyboard
Handheld, high-precision, digital manometer
with an accuracy of up to ±0.025% of full scale
Document up to 240 readings (auto or manual)
DESCRIPTION
™
M200
The Meriam MFC 5150 HART Communicator utilizes a
Windows based system for faster processing and greater
storage capacity. Plus, no subscriptions, and with all
options standard at no extra cost. The device is supplied
with a fast 1-GHz processor, 256 MB of RAM and 512 MB of
flash memory. It is capable of supporting up to an 8-GB SD
card, which gives it the ability to store every existing DD
file. This enables communication to take place with any
registered or unregistered HART device, ensuring that the
HART transmitter will connect to the 5150 regardless of
brand or model.
MODELS / EXTRAS
MFC 5150
Meriam MFC 5150.....................................................$5,200
includes HART Communicator, Docking Station and
Power Adapter, universal plug kit, USB Cable
communication from docking station to PC, Battery
pack, rechargeable 9600 mAH Li-Ion, Soft Carrying Case,
Hand Strap, and SD Card.
Engineering Units: Inches of H2O, PSI, mm of Hg,
inches of Hg, mBars, Bars, kPa, kg/cm2, cm of H2O
The Meriam M200 smart manometer brings high precision
and value to handheld, digital manometer users. The
Meriam M200 features NIST traceable accuracy of ±0.025%
of FS, independent of temperature effect, at the lowest
prices available. Pressure ranges from 10" H2O FS to 3,000
PSIG FS are available.
The Meriam M200 smart manometer pressure sensors are
available to measure gauge, differential or absolute
pressure. The display can read out in any of eleven pressure
units or can be linearly scaled for special user units.
Meriam M200...........................................................$1,150
The M200 is available in the following RANGES:
Differential: From 0 up to and including 2,000” H2O*
Gauge: From 0 up to and including 3,000 PSI*
Compound: From -15 up to and including +3,000 PSI*
Absolute: From 0 up to and including 1000 PSIA*
Atex certified Instrinsic Safety..................................$300
The M200 Series is available in the following ACCURACY:
Standard ± .05%
Enhanced ± .025%**
Intrinsically Safe Certification..................................$232
*Note: Prices vary based on range selected, see website for more info.
**Note: Please add $185 for this accuracy.
7
Call us at 1-800-921-9494 or visit www.easthillsinstruments.com
™
Wet/Wet
Smart Manometer
Enhanced Rotary
Gas Meter Tester
Accuracy: up to ±0.025% of Full Scale
7 Differential Pressure Ranges Avalable
Eleven user-selectable engineering units
Documents up to 240 readings for future recall
Field recalibration to zero, span and linearity
User-selectable 1-Point or 5-Point calibration procedure
Recalibration for zero, span and linearity
1-point or 5-point calibration procedure
Enhanced or Legacy software mode
Pressure limits are twice range on differential units
when pressurized on high side only and 150 PSI static
when applied to both sides of sensor simultaneously
The M200-DI is a handheld, intrinsically smart-manometer
for liquids with high accuracy for wet/wet differential pressure applications. Potentially corrosive or wet gasses can
also be handled. All ranges are rated for 1000 PSI common
mode pressure.
The M201 makes drop testing rotary (natural) gas meters
even easier. Improved hardware options protect the M201
from one sided overpressure. 'Measure Mode' lets it be
used as a conventional differential pressure measurement
device. Users will appreciate the live pressure display as
they check the handheld's zero or observe DP across rotary
gas meters. The M201 uses an internal stop watch to measure the test length during a drop test. It reports both the
test time and the average differential pressure measured
during the test. Toggle the Min/Max key to see the
minimum and maximum DP measured during the test.
The damping feature minimizes pulsation effects. The
'Hold' function freezes the display for convenient reading.
Leak test allows users to view Min/Max pressure values
and calculates leak rate per minute in pressure units.
This is a valuable tool for troubleshooting or pressure testing pneumatic systems.
Meriam M200-DI.......................................................$1,551
Includes protective red boot, batteries. The M200-DI is
available in the following differential RANGES:
0-300 PSID
0-500 PSID
0-1 PSID (0-28" H2O)*
The M200 Series is available in the following ACCURACY:
Standard ± .05%
The M201 is available in the following differential RANGES:
Differential - 0-200 inH20
Differential - 0-28 inH20 (+$62)
Enhanced ± .025%**
MODELS / EXTRAS
0-5 PSID (0-138" H2O)
0-15 PSID (0-415" H2O)
0-30 PSID (0-830" H2O)
0-100 PSID (0-2768" H2O)
Meriam M201 - Push-to-read Valve, brass (2-port
pressure manifold)..................................................$1,668
Meriam M201 - 1/4 turn Valve, brass, copper (2-port
pressure manifold)..................................................$1,719
Meriam M201 - Integral push-to-read-valve, 316SS, viton
(3-port pressure manifold)......................................$2,016
all models include protective red boot, batteries.
DESCRIPTION
M201
FEATURES
M200-DI
Intrinsically Safe Certification..................................$232
Intrinsically Safe Certification..................................$232
*Note: Prices vary based on range selected, see website for more info
**Note: Please add $185 for this accuracy.
Call us at 1-800-921-9494 or visit www.easthillsinstruments.com
8
FEATURES
DESCRIPTION
MODELS / EXTRAS
9
ThermCal400
SOURCE 3000
Dry Block
Temperature Calibrator
Pressure Source
Range: 25°C - 400°C (20°C ambient)
Stability: ±0.02°C (25°C - 200°C) | ±0.04°C (200°C - 400°C)
Accuracy: ±0.25°C (25°C - 200°C) | ±0.4°C (200°C - 400°C)
Heat up time 25 to 400°C: 13 Minutes
Cooling time 400 to 100°C: 20 Minutes
Weight: 11 lbs
Self-contained nitrogen cylinder
"Overpressure Protection" regulator
Works with all pressure calibrator models
15.2 cubic foot nitrogen at 3000 psi
The ThermCal400 is a small, portable and light weight
calibrator that is built rugged for field work with
specifications good enough to be a laboratory
standard. Perform calibration checks on liquid in glass
thermometers, dial thermometers, hand held digital
indicators, probe assemblies, systems and virtually
dozens of other temperature monitoring and recording
devices. Checking the performance and accuracy of a
temperature sensor is best performed by placing it in
precise environment at its true operating temperature.
The Condec Source 3000 is a pneumatic pressure source
that offers a clean and dry pressure up to 3,000 psi. It’s
pressure generator is equipped with a large-capacity
cylinder that ensures you won't run out of nitrogen in
the middle of a job. It eliminates the inconvenience
and physical stress of hand pumps. It has two ports for
connecting to a measuring device and virtually any
electronic calibrator. The Source 3000 is a unique device
that incorporates a pressure vernier to allow you to dial in
exact pressure readings, which eliminates the risk of costly
damage from overshoot.
ThermCal400............................................................$2,110
includes ThermCal400, multiwell aluminum insert,
insert extractor, power cable, carrying strap, instruction
manual, and traceable calibration certificate.
Source 3000..............................................................$4,195
Insert Blank.................................................................$175
Insert 5 x 1⁄4” holes.....................................................$208
Insert 2 x 1⁄4” & 2 x 3/8” holes.....................................$208
Insert 2 x 1⁄4” & 2 x 1⁄2” holes......................................$208
Insert 1 x 1⁄4” hole.......................................................$208
Insert 1 x 9/16” & 1 x 1⁄4” holes...................................$208
Insert 1 x 5/8” & 1 x 1⁄4” holes.....................................$208
Insert 1 x 11/16” & 1 x 1⁄4” holes.................................$208
Insert 1 x 3⁄4” & 1 x 1⁄4” holes......................................$208
Soft sided carrying case with insert pockets............$105
Swagelok QC4 Style Quick-Disconnect .......................$50
Swagelok QC4 Style Quick-Disconnect Female Test Ports
and QC4 Quick-Connect Male Fill Port (Buna-N Seals).
Ralston quick-test/check-valve...................................$50
Ralston quick-test/check-valve Male Test Ports and
Standard 7/16 -20 AN Male Fill Port (Buna-N Seals).
Tool Hose Canvas Carrier.............................................$45
2 High Pressure Hoses w/ Fittings.............................$499
Pressure Trap..............................................................$625
Stainless steel pressure trap to contain backflow.
Call us at 1-800-921-9494 or visit www.easthillsinstruments.com
™
Meteo Station
Differential Calibrator
Barometric pressure, Dew point determination
Altitude Measurement
Second temperature with insertion sensor
Works with Leica precision measurement equipment
Peak Value Storage, min/max
Ranges from as low as 0-10" H2O
Data Log Memory for 10,000 measurements
MIN/MAX and average values
Accuracy to better than .025% (±1/2 LSD)
Lowest full-scale differential pressure calibrator made
Withstands 145 psi static pressure
The HM30 has numerous applications including metrology,
heating, ventilation, air conditioning, geology, geodesy,
measurement, technique, aviation, and mountaineering.
Several meteo parameters can also be observed, measured
and evaluated along with simultaneous display
of barometric pressure, humidity, temperature 1 and
temperature 2. It also comes equipped with data-logging
including real time clock, data transfer to PC, PC remote
control facility, data printout possible without PC and
windows supported software.
The HM35 Gauge & Differential Digital Manometer provide
users with gauge, vacuum and differential pressure
measurements with accuracy to 0.05%FS. Absolute and
Barometric models are rated at 0.1% FS. Accuracy includes
stability for one year and is valid over the operating
temperature range of 0°C to 50°C. A large easy to read
display and light weight ergonomic case make the HM35
convenient to use. The HM35 is ideal for very low pressure
differential measurements.
HM30........................................................................$1,989
HM35........................................................................$1,995
HM35EX (explode proof).........................................$2,295
HM35AB (absolute)..................................................$2,295
• So sensitive you can measure the height of a table.
• Extremely Reliable.
0-10" H2O
0-28" H2O
0-80" H2O
0-120" H2O
0-200" H2O
0-14.5 PSI
0-15.9 PSI
0-29 PSI
0-100 PSI
0-145 PSI
0-245 PSI
0-500 PSI
0-1000 PSI
0-1300 PSI
MODELS / EXTRAS
The HM35 is available in the following RANGES:
Why the Meteo Station?
DESCRIPTION
HM35
FEATURES
HM30
• Complete instrument measures barometric pressure
and humidity pressure.
Call us at 1-800-921-9494 or visit www.easthillsinstruments.com
10
™
DESCRIPTION
PIE 850
10-50 mA Multifunction Process
Calibrator
The PIECAL 830 is more than a multifunction calibrator that
can handle Milliamp, Voltage, Frequency, pH Ohms,
Thermocouples, RTDs, Pressure, Loop Diagnostics, and
Transmitter Supply. It is also a loop detective that is able
to diagnose common problems that other test equipment
just cannot find.
Calibrate with Confidence
Detect hidden loop problems
Accurate to ±0.02% of Reading + 0.01% Full Scale.
Quickly diagnose troublesome ground faults & current leakage with
patented Loop Diagnostic technology. These problems are undetectable
with other instruments!
FEATURES
Pocket sized calibrator replaces toolbox of single function devices,
Milliamp, Voltage, Frequency, pH, Ohms, Thermocouples, RTDs, Pressure,
Loop Diagnostics, Transmitter Supply.
Check all loop parameters at once with the LoopScope
Guaranteed Compatibility with process inputs
Simultaneously displays current, voltage, and resistance to let you know
the condition of a live loop. Finds problems with power supplies & loops
with too many loads. Patented by PIE Instruments.
Compatible with the instruments you use including all brands of smart
transmitters and PLCs with 14 T/C and 9 RTD types to 0.1°C and 0.1°F
Automatically detect 2, 3 or 4 wire RTDs
Detect hidden loop problems
Trouble shoot sensor connections and find broken wires with patented
technology. LCD indicates which of the four wires are connected to an
RTD sensor.
Quickly diagnose troublesome ground faults & current leakage with
patented Loop Diagnostic technology. These problems are undetectable
with other instruments!.
Check all loop parameters at once with the LoopScope
Simultaneously displays current, voltage and resistance to let you know
the condition of a live loop. Finds problems with power supplies & loops
with too many loads. Patented by PIE!
Troubleshoot wiring problems without a multimeter
Built in continuity checker with beeper quickly finds broken wires or
shorts in instrumentation wiring. Also handy for checking operation of
relays and controller outputs.
MODELS / EXTRAS
High Accuracy Multifunction
Diagnostic Calibrator w/ Dual Display
The PIE Model 850 is more than a multifunction calibrator.
It is also a loop detective that is able to diagnose common
problems that other test equipment just can not find. Or
use the LoopScope to see at a glance all the parameters milliamps, voltage and resistance - in the loop.
Lighten up your toolbox
11
PIE 830
Swap out faulty transmitters to diagnose control issues
Easily setup the 830 as a universal isolated transmitter for temperature,
frequency, millivolt or pressure. If the loop is back under control you know
the transmitter was faulty. Turn on the LoopScope to simultaneously see
the loop current, power supply voltage and loop loads for troubleshooting.
Troubleshoot wiring problems without a multimeter
Built in continuity checker with beeper quickly finds broken wires or
shorts in instrumentation wiring. Also handy for checking operation of
relays and controller outputs.
PIE 850......................................................................$5,495
includes rubber boot, custom carrying case, test leads,
RTD wire kit, batteries, calibration certificate.
PIE 830......................................................................$2,895
includes rubber boot, custom carrying case, test leads,
RTD wire kit, batteries, calibration certificate.
T/C - J,T,E,K mini plug w/ stranded wire, lead kit.........$95
T/C - B,R/S,N mini plug w/ stranded wire, lead kit......$95
NiMh Charger & 4 “AA” batteries 120v 60hz...............$80
T/C - J,T,E,K mini plug w/ stranded wire, lead kit.........$95
T/C - B,R/S,N mini plug w/ stranded wire, lead kit......$95
Call us at 1-800-921-9494 or visit www.easthillsinstruments.com
™
PIE 334+
Multifunction Process
Calibrator
Milliamp Loop
Diagnostic Calibrator
The PIECAL 820 process calibrator packs the power of six
single function calibrators into one surprisingly small
package. It combines advanced features, ease of use,
accuracy, signal compatibility and compact size.
Essentially functions as a Fluke™ 743 without pressure and
documentation functions.
The PIECAL 334+ powers up the 2-Wire transmitter or loop
and indicates the total current and the uncontrolled
current. This provides information useful to troubleshoot
loop errors.
Lighten up your toolbox
Calibrate Milliamp Instruments
Pocket sized calibrator replaces toolbox of single function devices,
Milliamp • Voltage • Frequency, Thermocouples • RTDs • Check Continuity.
Source 0.00 to 24.00 mA & -25.0 to 125.0% of 4-20 mA, Read 0.00 to 52.00 mA,
Read -99.99 to 99.99 V, Simulate 2-Wire Transmitter, Power & Read
Transmitters, Menu Selectable 250 Ohm resistor for HART compatibility.
DESCRIPTION
PIE 820
Technician friendly operation
Intuitive EZ-DIAL Double Click Menu makes it easier to setup than other
multifunction calibrators. Uses the same menus as the single function
PIECAL Evolution Calibrators.
Calibrate with Accuracy
Accurate to ±(0.02% of Reading + 0.002 mA).
Easy-to-Read Backlit Display
Use it as a milliamp and voltage calibrator
Calibrate directly in temperature (°C & °F)
The PIECAL 820 works with the instruments you use. Types J, K, T, E, R, S, B,
N, G, C, D, L (J DIN), U (T DIN) and P (Platinel II). Pt 100 Ohm (3850, 2902, 3916,
3926) & 1000 Ohm (3850) Copper 10 & 50 Ohm, Nickel 100 and 120 Ohm.
Locate Loop Current Leakages
Automatic indication of Loop Current and Leakage Current. Measure
ground current leakage from faulty wiring, flooded conduit and corrosion
bridges. Leakage typically appears as a Zero Shift and helps you decide if
the transmitter needs calibration or if there is a problem in the loop
wiring.
FEATURES
Source 0 to 24.00 mA, 0 to 10.25v dc and -10.00 to 110.00 mV, Read to 24.00
mA, ±60.00v dc and -10.00 to 110.00 mV, Simulate 2-Wire Transmitters,
Power up transmitters & loops with the built-in 24v power supply, Simplify
HART hookups with built-in 250 Ohm resistor.
Faster Calibrations
Three output EZ-CHECK switch, 2 speed EZ-DIAL, Stepping & Ramping
Includes Rubber Boot & Test Leads.
Checkout flow and vibration systems
Source & read frequency to 2000 CPM (Counts-Per-Minute), 999.00
Hz, 9999.9 Hz, 9.9999 kHz & to 20.000 kHz.
Troubleshoot loop & wiring problems
'Beep' out connections with the built-in continuity checker.
PIE 334+.......................................................................$845
includes rubber boot, custom carrying case, test leads,
batteries, calibration certificate.
T/C - J,T,E,K mini plug w/ stranded wire, lead kit.........$95
T/C - B,R/S,N mini plug w/ stranded wire, lead kit......$95
AC Adaptor 100-120v,60Hz............................................$60
NiMh Charger & 4 “AA” batteries 120v 60hz...............$80
Call us at 1-800-921-9494 or visit www.easthillsinstruments.com
MODELS / EXTRAS
PIE 820......................................................................$1,895
includes rubber boot, custom carrying case, test leads,
RTD wire kit, batteries, calibration certificate.
12
™
DESCRIPTION
FEATURES
PIE 434
PIE 311
Automated Diagnostic
4-20 mA Calibrator
Automated Universal
RTD Calibrator
The PIECAL 434 allows you to check, calibrate and measure
all of your current signal instruments in a 4-20 mA DC loop.
It can be used at any access point in your loop. You can
calibrate recorders, digital indicators, stroke valves or any
instruments that get their input from a 4-20 mA loop.
Quickly diagnose ground fault and current leakage.
The PIECAL 311 gives you an updated design while
maintaining the familiar, time proven ease of use of
similar calibrators. Get an RTD calibrator with more
digits (0.01° resolution), automatic stepping, backlit
display, a rubber boot and rugged switches. It is also
compatible with more instruments in the field.
Calibrate Milliamp Instruments
Calibrate with Ease
Source 0.000 to 24.000 mA & -25.00 to 125.00% of 4-20 mA. Read 0.000 to
24.000 mA & -25.00 to 125.00% of 4-20 mA. Read -99.99 to 99.99 V. Simulate
2-Wire Transmitter, Power & Read Transmitters. Menu Selectable 250 Ohm
resistor for HART compatibility.
Resolution to 0.1 °F & °C; Accurate to 0.2°.
Calibrate with Lab Accuracy
Platinum 100 Ω: 1.3850, 1.3902, 1.3926, Platinum 1000 Ω: 1.3850, 1.3750,
Copper 10 & 50 Ω; Nickel 110 & 120 Ω; 0.00 to 4001.0 Ω, Custom ranges
available: consult factory.
Accurate to ±(0.01% of Reading + 0.002 mA). PIECAL 434 is more accurate
than similar calibrators - within ±0.004 mA at 20 mA output!
Automatically Detect 2, 3, & 4 Wire Connections
Locate Loop Current Leakages (Ground Faults)
Troubleshoot sensor connections & find broken wires with patented
technology.
Automatic indication of Loop Current and Leakage Current. Measure
ground current leakage from faulty wiring, flooded conduit and corrosion
bridges. Leakage typically appears as a Zero Shift and helps you decide if
the transmitter needs calibration or if there is a problem in the loop
wiring.
MODELS / EXTRAS
Faster Calibrations
13
Source and Read Multiple RTD Curves plus Ω
Guaranteed Compatible with all Instrumentation
Works with Rosemount & Honeywell Smart Transmitters, PLCs, DCSs,
Multi-channel Recorders and other pulsed excitation devices.
Faster Calibration
Three output EZ-CHECK switch, 2 speed EZ-DIAL, Stepping & Ramping.
Instantly select three outputs with EZ-CHECK switch. Easily find trip
points with two speed EZ-DIAL knob & Automatic Stepping.
Easy-to-Read Backlit Display
Additional Info
Easy viewing in dark locations.
Double click to select RTD Type & °F & °C. Secondary display of Ω, Easy-toRead Display w/ backlight. Simple "No Tool" Battery Changes, Four
inexpensive "AA" batteries, Use in the Plant, Field or Shop.
PIE 434.......................................................................$995
includes rubber boot, custom carrying case, batteries,
calibration certificate, and test leads.
PIE 311......................................................................$1,395
includes rubber boot, custom carrying case, batteries,
calibration certificate, and RTD Wire Kit.
AC Adaptor 100-120v,60Hz............................................$60
NiMh Charger & 4 “AA” batteries 120v 60hz...............$80
Call us at 1-800-921-9494 or visit www.easthillsinstruments.com
™
PIE 422
Automated Thermocouple
Calibrator - J, K, T & E
Automated Thermocouple
Calibrator - 14 Types
The PIECAL 322-1 gives you advantages of an updated
design while maintaining the familiar, time proven ease of
use of similar calibrators. Choose the PIECAL 322 and get a
thermocouple calibrator with a backlit display, a rubber
boot and rugged switches with the same high accuracy.
The PIECAL 422 gives you advantages of an updated design
while maintaining the familiar, time proven ease of use of
similar calibrators. equipped with a backlit display,
automatic stepping, simultaneous display of temperature
and millivolt reading, a rubber boot and rugged switches
with the same high accuracy.
Source and Read Fourteen T/C Types plus mV
J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) & P (Platinel): -13.000 to 80.000 mV.
Calibrate with Confidence
Calibrate with Confidence
Resolution to 0.1 °F & °C; Accurate to 0.2°.
Resolution to 0.1 °F & °C; Accurate to 0.2°.
Faster Calibrations
Faster Calibrations
Instantly select three outputs with EZ-CHECK switch. Easily find trip
points with two speed EZ-DIAL knob & Automatic Stepping.
Instantly select three outputs with EZ-CHECK switch. Easily find trip
points with two speed EZ-DIAL knob & Automatic Stepping.
Easily Change T/C Types & Scale
Easily Change T/C Types & Scale
Double click to select T/C type & °F & °C.
Double click to select T/C type & °F & °C.
Easy-to-Read Display
Use in the Plant, Field or Shop
Turn on the backlight to read in dark areas of the plant.
Use in the Plant, Field or Shop
Includes Rubber Boot and mV Test Leads. Low profile switches resist
accidental damage. Four Inexpensive “AA” batteries to operate. Turn on
the backlight to read in dark areas of the plant.
Includes Rubber Boot and mV Test Leads. Low profile switches resist
accidental damage.
Verify Cold Junction Temperature & Output
Simple "No Tool" Battery Changes
Secondary Display of compensated millivolt setting and cold junction
temperature.
FEATURES
Source and Read Four T/C Types plus mV
J, K, T & E: - 13.000 to 80.000 mV.
DESCRIPTION
PIE 322-1
Four inexpensive "AA" batteries.
Optional Accessories
Wire & Mini T/C Plug: J, T, E, K (020-0202); B, R/S, K (020-0203).
Optional Accessories
Wire & Mini T/C Plug: J, T, E, K (020-0202).
PIE 422......................................................................$1,295
includes rubber boot, custom carrying case, batteries,
calibration certificate.
T/C - J,T,E,K mini plug w/ stranded wire, lead kit.........$95
T/C - J,T,E,K mini plug w/ stranded wire, lead kit.........$95
T/C - B,R/S,N mini plug w/ stranded wire, lead kit......$95
NiMh Charger & 4 “AA” batteries 120v 60hz...............$80
Call us at 1-800-921-9494 or visit www.easthillsinstruments.com
MODELS / EXTRAS
PIE 322-1......................................................................$995
includes rubber boot, custom carrying case, batteries,
calibration certificate.
14
™
DESCRIPTION
PIE 541
PIE 511B
Frequency Calibrator
with Totalizer
Ten Type RTD
Plus Ω Simulator
The PIECAL 541 is the best tool for calibration, test, and
any frequency devices in the shop, plant and/or field. Save
hours of time on problems when compared to other
calibration methods. This calibrator will automatically stop
when the selected number of pulses has been sent to the
totalizer, eliminating the need of a stop watch.
The PIECAL 511B simulates RTD resistances into
transmitters, recorders, controllers, alarms, data
acquisition, and computer systems and has better
accuracy and functions than most other RTD calibrators. It
is a superior replacement for decade boxes considering the
weight difference.
Frequency Read & Source Functions
Simulate one or ten RTD types
True ±0.005% of range accuracy. Source and Read. Six Ranges 1 per hour to
20.000Khz. Calibrate Totalizer input and outputs from 1 to 99999. Count
Pulses 1 to 99999. LED indicator for gate time.
Check & calibrate all your RTD instruments. Includes four detachable leads
with spade lugs for easy connection to your RTD instruments. Choose the
PIECAL 511B if you have multiple types of RTDs (up to 10) with an accuracy
of ±(0.015% of Setting in Ohms + 0.05 Ohms)
FEATURES
Read / Source Function
Read a wide range of Frequencies and Waveforms. Read 50mV to 120V
peak. Read signals from Flowmeter pickups, Velocity and Motion
Detectors and Totalizers. Sine and Square waves, Zero Based and Zero
Crossing. Frequency from 1CPH to 20 KHz. Adjustable amplitude from
100mV to 12Volts peak-to-peak. Simulates Vibration Pickups, Variable
Speed Drives and more.
Calibrate Totalizers & Gate Trigger Indicator
Output a number of pulses from 1 to 100 minutes. The LED flashes in sync
with the output frequency allowing easy adjustment of the attenuation
for proper gate triggering.
EZ-Dial Knob & EZ-Check Switch
Change the speed of dialing your test point by just pushing down on the
knob. Stop watch style push button for accurate totalizer measurements
and for high and low readings

U
 ses a standard 9V Alkaline Battery
MODELS / EXTRAS
Superior battery life of 24 hours under typical continuous usage. Easy
access to battery compartment.
15
Take it into the shop, plant or field
Carry it without worry - protect it with an optional rubber boot and
rugged, low profile switch. Easy to operate even in the dark areas of the
plant with the backlit display.
Calibrate directly in temperature (°C & °F)
Stop carrying around a decade box and RTD resistance tables. The PIECAL
511B simulates the RTDs you use including Platinum 100 (alpha = 3850,
3902, 3926) & 1000 (alpha = 3850, 3750) Ohm, Copper 10 & 50 Ohm, Nickel 100
and 120 Ohm. Easily set any value quickly to within 0.1° with the adjustable digital potentiometer “DIAL” plus store any three temperatures
for instant recall with the EZ-CHECKTM switch. Or use like a decade box
from 0.00 to 410.00 and from 410.0 to 4001.0 Ohms.
Compatible with ALL process instruments
No competitor’s calibrator is compatible with as many process
|instruments! Connect directly to the RTD inputs of smart transmitters,
PLCs, DCS and multichannel recorders and verify their outputs or displays.
Works with older instruments and newer multichannel instruments that
switch the excitation current between input channels.
PIE 541......................................................................$1,345
includes carrying case, batteries, calibration certificate,
and attached test leads.
PIE 511B.......................................................................$635
includes batteries, calibration certificate, and attached
test leads.
NiMh Charger & 4 “AA” batteries 120v 60hz...............$80
PIE 510B.......................................................................$565
Single RTD Simulator Model.
Call us at 1-800-921-9494 or visit www.easthillsinstruments.com
Portable 24V
Loop Power Supply
Portable 24V
Loop Power Supply
No need to run wires
Can Power Any 4-20mA Loop
Up to a month of daily use
Battery Operated
2 Year Quibble-Free Warranty
No need to run wires
Can Power Any 4-20mA Loop
Up to a month of daily use
Battery Operated
2 Year Quibble-Free Warranty
The Loopy 5000 provides field technicians with a portable,
economic, and durable 24VDC power source for powering
field transmitters. This is especially useful during plant
startup, shutdown, and overhaul, when the loops are not
usually energized, but field instruments must still be
installed, tested, and calibrated.
The Loopy 6000 provides field technicians with a portable,
economic, and durable 24VDC power source for powering
field transmitters. This is especially useful during plant
startup, shutdown, and overhaul, when the loops are not
usually energized, but field instruments must still be
installed, tested, and calibrated.
Efficient switching regulator allows LPS to extract virtually
100% of available battery power. Accidental short circuits
are protected by a Positive Temperature Coefficient
thermistor. A must have for any field technician's tool bag.
Efficient switching regulator allows LPS to extract virtually
100% of available battery power. Accidental short circuits
are protected by a Positive Temperature Coefficient
thermistor. A must have for any field technician's tool bag.
LOOPY 5000.................................................................$199
Powered by (1) 9 Volt Battery. Offers superior portability from the palm of your hand to your shirt pocket.
LOOPY 6000.................................................................$199
Powered by (4) AA Batteries. Offers superior portability
from the palm of your hand to your shirt pocket.
* $50 OFF w/ purchase of any PIE Calibrator.
* $50 OFF w/ purchase of any PIE Calibrator.
DESCRIPTION
LOOPY 6000
FEATURES
LOOPY 5000
MODELS / EXTRAS
Why the Loopy?
• Doesn’t tie up a second loop calibrator.
• Great for isolated loops.
• Light / Easy to carry.
• Compare to Transcat Model #21050E.
Call us at 1-800-921-9494 or visit www.easthillsinstruments.com
16
DESCRIPTION
PD6000
Trident X2 Process &
Temperature Meter
ProVu®
Process Meter
Input: Process: 0-20 mA, 4-20 mA; ±10 VDC (0-5, 1-5, 0-10 V)
Temperature: Thermocouple J, K, T, E; RTD 100 Ω Pt
Display: 4-digit, 1.20" (30.5 mm)
Case: 1/8DIN, NEMA 4X/IP65
Power: 85-265 VAC or 12-36 VDC option
Operating Temperature: 0 to 65°C
Input: 0-20 mA, 4-20 mA; 010 VDC (0-5, 1-5, 0-10 V); Modbus
PV (slave)
Display: Dual-line 6-digit, 0.60" (15 mm) & 0.46" (12 mm)
Case: 1/8 DIN, NEMA 4X/IP65
Power: 85-265 VAC or 12/24 VDC option
Operating Temperature: -40 to 65°C
• 1° or 0.1° resolution with RTD
• Sunlight readable display
• Maximum/minimumdisplay
• Linear or square root with low-flow cutoff
• Transmitter power option
• Modbus® RTU or proprietary ASCII protocol
• Shallow depth case 3.6" behind panel
OPTIONS
• 2 relays and 4-20 mA analog output options
• 24 VDC transmitter power supply
• Dual 24 VDC transmitter power supplies
• Serialcommunications
• Dual-scale for level applications - single input
• Signal input conditioning for flow & round horizontal tanks.
• 32-point, square root, or exponential linearization
• Multi-pump alternation control
• On-board digital input
• Programmable function keys
• Isolated 24 VDC @ 200 mA transmitter power supply
• Modbus® RTU communication protocol
OPTIONS
• 4-20 mA output with isolated 24 VDC @ 40 mA power supply
• 2 or 4 form C internal relays
• External 4-relay and digital I/O expansion modules
• RS-232, RS-485 serial communications
• SunBright display models
PD765 X2.................................................. Starting at $319
PD6000......................................................Starting at $299
Call for Options or see website.
Call for Options or see website.
MODELS / EXTRAS
FEATURES
PD765 X2
17
Call us at 1-800-921-9494 or visit www.easthillsinstruments.com
ProVu®
Temperature Meter
ProtEX-RTP Pulse Input
Flow Rate/Totalizer
Input: Thermocouple J, K, T, E, R, S, B, N , C; RTD 100 Ω PT, 10
Ω Cu, 120 Ω Ni, 1,000 Ω Pt; Modbus PV (slave)
Display: Dual-line 6-digit: 0.60" (15 mm) & 0.46" (12 mm)
Case: 1/8 DIN, NEMA 4X/IP65
Power: 85-265 VAC or 12/24 VDC option
Operating Temperature: - 20 to 65°C
Input: Pulse, open collector, NPN, PNP, TTL, switch contact, sine wave (coil), square wave, opto-isolated
Case: Smooth die-cast aluminum explosion-proof
Power: 9-30 VDC, output-loop, or battery
Operating Temperature: -40 to 75°C (-20 to 75°C battery)
• 1° or 0.1° resolution
• Averages up to 10 RTD sensors
• Automatic cold junction compensation
• Interlock relays (force on)
• On-board digital input
• Programmable function keys
• Modbus® RTU communication protocol
• SafeTouch® through-glass button programming
• Up to 13-digit total with overflow display
• Mounts directly to flowmeter
• Automatic rate, total, & grand total unit conversions
• On-board data logging (1024 points)
• Two isolated open collector pulse outputs, up to 5 kHz
• Backlight standard on all models
• Displays 5-digit rate 0.7" (17.8 mm); 7 alphanumeric
character total 0.4" (10.2 mm)
OPTIONS
• 4-20 mA output with isolated 24 VDC @ 40 mA power supply 2 or 4 form C internal relays
• External 4-relay and digital I/O expansion modules RS-232,
RS-485 serial communications
• SunBright display models
DESCRIPTION
PD6830
FEATURES
PD7000
OPTIONS
• Isolated 4-20 mA output for rate, total, or grand total
• Isolated or non-isolated RS-485 with Modbus® Communications.
PD6830......................................................Starting at $859
Call for Options or see website.
Call for Options or see website.
Call us at 1-800-921-9494 or visit www.easthillsinstruments.com
MODELS / EXTRAS
PD7000......................................................Starting at $299
18
DESCRIPTION
1051
1040
8 Decade Wide Range
Resistance Box
8 Decade Wide Range
Resistance Box
A precision low ohm resistance box designed for
general laboratory work including platinum resistance
thermometry. The 1051 is compact and durable, with
range from 0.01Ω to 1MΩ and 0.1% best accuracy.
A popular wide range decade box covering 0 to 100MΩ
in 1Ω steps, with 0.1% best accuracy. The 1040 is used in
both industry and education, providing precision and
reliability in all required applications.
MODELS / EXTRAS
FEATURES
Range / Resolution: 0 to 100MΩ / 1Ω steps
19
Range / Resolution: 0 to 100MΩ / 1Ω steps
Decade
0.01Ω
0.1Ω
1Ω
10Ω
100Ω
1kΩ
10kΩ 100kΩ
Decade
1Ω
10Ω
100Ω
1kΩ
10kΩ 100kΩ
1MΩ
10MΩ
Accuracy
±10%
±5%
±1%
±0.5%
±0.1%
±0.1%
±0.1% ±0.1%
Accuracy
±1%
±0.5%
±0.1%
±0.1%
±0.1%
±0.1%
±0.1%
±1%
Max Current
1A
1A
1A
0.3A
0.1A
33mA
10mA
Max Current
0.5A
0.3A
100mA
30mA
3mA
0.3mA
30µA
3µA
3mA
Residual Resistance: Less than 250mΩ
Power Rating: 1 watt per resistor
Voltage Rating: Maximum 250V DC/AC RMS
Temperature Coefficient: 50ppm/ºC
Color coded digits, safety terminals
W8.4 x H3.9 x D4.7” • Weight: 2.2 lbs
Residual Resistance: Less than 250mΩ
Power Rating: 1 watt per resistor
Voltage Rating: Maximum 250V DC/AC RMS
Temperature Coefficient: 50ppm/ºC
Color coded digits, safety terminals
W8.4 x H3.9 x D4.7” • Weight: 2.2 lbs
1051 Resistance Decade Box......................................$895
1040 Resistance Decade Box......................................$895
1041 Resistance Decade Box......................................$695
A low ohm decade box covering 0 to 1kΩ in 0.01Ω steps,
with 0.5% mid scale accuracy (see first 5 decades of 1051
table).
1061 : 6 Decade Resistance Box.................................$475
Slim line design with in-line read-out that has a range
of 0 to 1.2MΩ in 1Ω steps, accuracy ±1%
Protective Rubber Boot...............................................$44
Carrying Case..............................................................$125
NIST/UKAS Calibration Cert.......................................$215
Call us at 1-800-921-9494 or visit www.timeeusa.com
Protective Rubber Boot...............................................$44
Carrying Case (1040)....................................................$125
NIST/UKAS Calibration Cert.......................................$215
6 Decade Precision
Resistance Box
Decade Capacitance Boxes
A high accuracy resistance decade box ideal for PT100
simulation applications. Range is 0 to 12kΩ in 10mΩ
steps, with ± 0.01% accuracy.
Capacitance boxes suitable for applications in industry
and education. The 1070 is a 5 decade model for 100pF
to 100μF and the 1071 has 7 decades for 10pF to 100μF.
Range / Resolution: 0 to 12kΩ / 10mΩ steps
Accuracy: ± 0.01%
Resistance: Less than 10mΩ - Less than 1mΩ variation
Power Rating: 0.35 watt per resistor
Stability: 20ppm/year (>1Ω), 100ppm/year (<1Ω)
Voltage Rating: Maximum 200V DC/AC RMS
Insulation: Case to resistance terminals 2kV / 50Hz max
Temperature Coefficient: 10ppm/°C (20ppm/°C below 1Ω)
W13.8 x H2.5 x D3.5” • Weight: 2.4 lbs
1070 Range / Resolution: 0 to 10 F / 100pF steps
1070 Residual Capacitance: Less than 38pF
1071 Range / Resolution: 0 to 100 F / 10pF steps
1071 Residual Capacitance: Less than 50pF
Accuracy: 1% (5% above 10µF on 1071)
Voltage Rating: Maximum 300V DC, 200V AC
Bi-polar working, color coded digits, safety terminals
W8.4 x H3.9 x D4.7” • Weight: 2.2 lbs
1067 : 6 Decade Precision Resistance Box..............$1,675
1070 : 5 Decade Capacitance Box...............................$895
1071 : 7 Decade Capacitance Box...............................$995
1065 : 6 Decade Power Resistance Box...................$1,750
0 to 120kΩ in 0.1Ω steps, best accuracy is 1%, and each
resistor has a 10 watt power rating.
1053 : 4 Decade Inductance Box..............................$1,295
Range is 0 to 10H in 1mH steps.
Protective Rubber Boot (1070, 1071)............................$44
Carry Case (1070, 1071)................................................$125
NIST/UKAS Calibration Certificate............................$215
Call us at 1-800-921-9494 or visit www.timeeusa.com
MODELS / EXTRAS
NIST/UKAS Calibration Certificate............................$215
FEATURES
1070 | 1071
DESCRIPTION
1067
20
DESCRIPTION
FEATURES
1006 | 1007
1024
DC Millivolt Sources
DC Current Calibrator
High accuracy handheld millivolt sources primarily
used for voltage injection or potentiometric voltage
measurement (1007). Applications include thermocouple
simulation and calibration of A/D converters and chart
recorders.
A portable benchtop DC current source for calibration
and test applications from nanoamp levels to 100mA.
Applications include current transducer testing and
calibration and linearity tests on digital and electronic
current meters.
3 ranges up to 1V
Accuracy 0.02% of setting + 0.02% of range
Best resolution 1µV
20mA output current
Powered by 6 AA batteries
100 hours typical battery life
Short circuit and overload protected
Safety terminals
LED null measuring facility (1007)
H8.4 x W3.9 x D4.7” • Weight: 2.5 lbs
0 to 100mA output in 5 ranges
Accuracy 0.02% of setting
10ppm/hr stability
Up to 15V output drive
30ppm/°C temperature coefficient
Safety terminals
Null meter measures to 1µA resolution
Battery or mains operation
12 hours typical use between charges
W8.5 x H6.2 x D7.5” • Weight: 7.3 lbs
1006 DC Millivolt Source .........................................$1,350
1007 DC Millivolt Potentiometer and Calibrator...$1,750
1024 DC Current Calibrator......................................$2,585
MODELS / EXTRAS
1010 DC Voltage Calibrator......................................$2,250
0.01µV to 10V in 5 ranges / Accuracy 0.02% of setting.
21
Protective Rubber Boot (1006, 1007)............................$44
Carrying Case (1006, 1007)...........................................$125
Rechargeable Battery Pack (1006, 1007)....................$160
NIST/UKAS Calibration Cert (1006, 1007)....................$195
Carrying Case (1010)....................................................$195
NIST/UKAS Calibration Certificate (1010)..................$255
Call us at 1-800-921-9494 or visit www.timeeusa.com
1021 Milliamp Source with Null Indicator..............$1,725
0 to 100mA output in 3 ranges / Accuracy 0.02% of
setting +0.02% of rating.
1077 Milliamp Transducer Simulator......................$1,995
3 operating modes / 100mA source and load / 24V line
mode / 0.02% accuracy.
Protective Rubber Boot (1021, 1077)............................$44
Carrying Case (1024)....................................................$215
NIST/UKAS Calibration Cert (1024).............................$230
Carrying Case (1021, 1077)...........................................$125
Rechargeable Battery Pack (1021, 1077)....................$160
NIST/UKAS Calibration Cert (1021, 1077)....................$195
Voltage/Current/Resistance
Calibrator
Voltage and Current Calibrator
A portable multifunction calibrator with voltage,
current, and resistance ranges. The 1017 is suitable for
calibrating a wide range of instruments including
thermocouples, transducers, transmitters, and
platinum resistance thermometers.
A precision handheld calibrator that can be used as a
general purpose current and voltage source. High
performance and ease of use make it suitable for test
engineers, R&D, service, and calibration technicians.
DC Voltage 10nV to 100V
DC Current 100nA to 100mA
Resistance 10mΩ to 10kΩ
Accuracy 0.005% of setting + 0.002% of rng
1ppm setting resolution
Stability <5ppm/day, <25ppm/yr
Noise <2ppm (0.1 to 1Hz)
Deviation control Voltage and Current
Battery or mains operation
12 hours typical use between charges
W9.8 x H4.6 x D12.2” • Weight: 5.3 lbs
Measure voltage and current
Source voltage and current
3 voltage ranges 0 to 20V
3 current ranges 0 to 20mA
Accuracy 0.05% of range
4.5 digit LCD display
Battery powered 9V PP3
28 hours typical battery life
Supplied with carry case
H5.5 x W3.0 x D2.0” • Weight: 0.7 lbs
1017 Voltage/Current/Resistance Calibrator.........$2,825
1044 Voltage and Current Calibrator......................$975
NIST/UKAS Calibration Cert.......................................$290
1030 Voltage and Current Source............................$625
10mV, 100mV, 1V ranges / 10mA, 100mA ranges / Accuracy 0.1% of range.
Call us at 1-800-921-9494 or visit www.timeeusa.com
MODELS / EXTRAS
110V Mains Power Supply (not charger) (1044)..........$85
NIST/UKAS Calibration Cert (1044).............................$168
Rechargeable Battery Pack (1030)..............................$85
NIST/UKAS Calibration Cert (1030).............................$128
FEATURES
1044
DESCRIPTION
1017
22
DESCRIPTION
FEATURES
MODELS / EXTRAS
23
1048
7006
Voltage and Current Calibrator
Loop-Mate 1
Loop Simulator and Source
A compact voltage, current, and process loop calibrator
for engineering, manufacturing, test, and process
control applications. The 1048 combines digital
accuracy with simple analogue control and is well
suited to plant operations such as powering control
loops.
A cost-effective handheld loop simulator that provides
4 to 20mA or 0 to 10V loop signals. Features include
manual and automatic step modes with audible
indication that changes pitch as the output
increases/decreases.
Source/measure voltage and current
3 source ranges: 0 to 22mA and 0 to 22V
3 measure ranges: 0 to 70mA and 0 to 50V
Accuracy 0.02% of range
Transmitter simulator/sink loop control
Output steps and ramps
Fine adjustment (inching)
Battery powered 9V PP3, 20 hours typical use
H5.5 x W3.0 x D2.0” • Weight: 0.7 lbs
4 to 20mA or 0 to 10V ranges
Set-points: 0, 10, 25, 50, 75, 90, 100% of range
Accuracy 0.1% of range
TxSim or RxTest modes
Internal loop supply, 25mA maximum
Auto-stepping mode: up/down/up, 0.5, 1, 2, 4, or 8 sec/step
Battery powered 9V PP3, 40 hours of typical use
Supplied with carry case
H5.5 x W2.5 x D1.2” • Weight - 0.4 lbs
1048 Voltage and Current Calibrator.........................$995
7006 Loop-Mate 1: Loop Simulator and Source........$410
7005 Voltage/Current/Loop Calibrator...................$1,335
Current measure: 125mA, source 50mA / Voltage
measure: 25V, source 21V / Accuracy: Source 0.01% of
setting, Measure: 0.01% of reading.
7007 Loop-Mate 2: Loop Signal Indicator..................$365
4 to 20mA, 0 to 10V, 0 to 50V ranges / LCD 4 digit display,
mA, V, or % of range / Accuracy 0.05% of reading.
NIST/UKAS Calibration Cert.......................................$162
110V Mains Power Supply (1048)..................................$85
NIST/UKAS Calibration Cert (1048).............................$168
NIST/UKAS Calibration Cert (7005).............................$245
Call us at 1-800-921-9494 or visit www.timeeusa.com
PT100 Simulator
Multifunction Process Calibrator
A handheld precision simulator for PT100 0.3850
platinum resistance elements used for accurate
temperature measurement. High performance metal
film resistors are used throughout which ensures a
good temperature coefficient and long term stability.
A portable, key-press operation instrument that
combines source and measurement functions for
thermocouples, RTDs, mV and mA. The 1090 features a
memory storage function that holds frequently used
values.
-200°C to +800°C with 23 set points
Accuracy ± 0.3°C
Less than 30ppm/°C temperature coefficient
ITS-90 IEC60751
Exceeds class A
Passive resistance source
°F version available – 1050
1050 Range: -100°F to 1000°F, ± 0.5°F accuracy
Carrying Case Included
H4.4 x W2.4 x D2.1” • Weight - 0.4 lbs
Measures/simulates 8 thermocouple types,
PT 100-RTD, mV and mA
Displays units in °C, °F, μV/mV, or mA
Accuracy: Source 0.02% of range, 0.5°C.
Measure 0.05% of range, 0.7°C
Automatic or manual cold junction compensation
Inching and step functions with time configurable steps
Process loops 4 to 20mA and 0 to 50mA
Mains or battery operation, 60 hours typical use
Battery Charger and Carrying Case Included
H9.2 x W5.9 x D2.9” • Weight - 2.8 lbs
1049 PT100 Simulator (°C)...........................................$550
1050 PT100 Simulator (°F)............................................$550
1090 Multifunction Process Calibrator..................$2,750
NIST/UKAS Calibration Cert (1049. 1050)....................$215
Mains Power Adaptor (7000)........................................$95
NIST/UKAS Calibration Cert (7000).............................$270
7050 Process/Thermocouple Calibrator.................$6,300
Measure and simulate V, mV, mA, and ohms with the
direct readout simulation of thermocouples and RTDs
in °C or °F units.
NIST/UKAS Calibration Cert (1090).............................$255
NIST/UKAS Calibration Cert (7050).............................$595
Call us at 1-800-921-9494 or visit www.timeeusa.com
MODELS / EXTRAS
7000 RTD Temperature Calibrator..........................$1,495
Measure and simulate °C, °F, °K, and ohms / PT100 plus 7
other RTD types / Temp Accuracy 0.05°C (0.09°F) /
Resistance Accuracy 0.03Ω.
FEATURES
1090
DESCRIPTION
1049
24
DESCRIPTION
FEATURES
MODELS / EXTRAS
25
5025E
5075
Multifunction Calibrator
Precision Digital Multimeter
A precision multi-product calibrator designed for wide
calibration workload coverage at an affordable cost.
Accurately test and verify both traditional and new test
equipment with a calibrator that meets both technical
and budget requirements.
A benchtop digital multimeter that combines high
performance with simple operation. The 5075 easily
measures from nanovolts to 10kV, from picoamps to 30
amps, from micro-ohms up to 1GΩ, from picofarads to
300µF, with up to 7 1/2 digit accuracy.
0 to 1050V AC/DC voltage
0 to 22A AC/DC current
10Ω to 1GΩ resistance
PT100 and Thermocouple simulation
Digital frequency
Capacitance
Optional adaptor for clamp meter calibration
RS-232 and USB interfaces
PC Virtual Control Software included
Supplied with 5 piece test lead set
W17.7 x H6.0 x D18.7” • Weight: 36.4 lbs
7 digit resolution
10nV to 10kV, 10pA to 30A
Resistance, Capacitance, and Frequency
18ppm accuracy/best 1 year
10 channel low thermal emf scanner option
PC/laptop control via EasyCal software
GPIB interface (USB adaptor available)
Rack mount kit option
W16.5 x H3.5 x D16.2” • Weight: 18.7 lbs
5025E Multifunction Calibrator...............Call For Pricing
5075 Precision Digital Multimeter..........Call For Pricing
5025 Multifunction Calibrator....................................CFP
5051+ Multifunction Calibration System...................CFP
5065 Digital Multimeter (6.5 digit)..............................CFP
5011 Resistance / Temperature Calibrator................CFP
5018 Programmable DC/AC V/I Calibrator.................CFP
5045 Oscilloscope Calibrator.......................................CFP
5077 Power Calibrator.................................................CFP
Common Options (5025E & 5025):
9770 Scope Calibration (1mV to 200V, 0.1Hz - 100 MHz)
9797 Power Calibration (0-20KW AC and DC)
9780 External Clamp Meter Adaptor
ECFLA EasyCal Calibration Software
Call us at 1-800-921-9494 or visit www.timeeusa.com
CalBench
Multi-Purpose Calibration Benches
Common applications include the calibration of:
Pressure: Gauges, Calibrators, Transducers, Transmitters,
Indicators, Switches, Valves.
Temperature & Loop: Sensors, Indicators, Thermocouple and
RTD Transmitters, Calibrators, PRTs, Thermistors.
Electrical/Electronic: Multimeters, AC/DC Signal Sources,
Clamp Meters, Tachometers, Ohmmeters, Decade Boxes.
Frequency: Signal Generators, Oscilloscopes, Frequency
Meters, Timer Counters.
And Much More: Incorporate various test equipment for
Flow, Level, Mass, Mechanical, Dimensional, and more.
CalBenches are used in test facilities across the world.
It provides customers with a high performance system for
the necessary applications within their respective industries.
Popular Industries: Petrochemical, Power Generation, Oil &
Gas, Manufacturing, Nuclear, Automation, Automotive,
Aeronautics, Transport, Telecomms, Pharmaceuticals, R & D,
Metrology, Process, and Education.
Popular Locations: Processing Plants, Offshore Platforms,
Refineries, Power Plants, Engineer Training Centers, Schools
and Universities, Calibration Laboratories, R & D Labs,
Manufacturing Plants.
Pressure: Precision calibrators, indicators, and controller
modules. Ranges from vacuum to 600bar.
Additional Modules: Further modules include oscilloscopes,
frequency counters, function generators, and harmonics
analyzers. Custom design modules can be fitted allows the
user to integrate a familiar instrument into their system.
Loop & Temperature: High accuracy loop calibrator modules
with source, measure and sink functions. Temperature
calibrators for measuring & simulating RTDs/thermocouples.
External Options: Pneumatic and hydraulic calibration
pumps, pressure gauges, dead weight testers, dry block
calibrators, pressure test kits, hoses and connectors, test lead
sets, solder stations, vices, and much more.
Multifunction Calibrator and DMM Modules: The 7051
provides high accuracy multi-product calibration and has an
internal 61⁄2 digit multimeter. Also available are the 5065B
(61⁄2 digit) and 5075B (71⁄2 digit) DMM modules.
Accessories: To improve usability and create a more efficient
workspace drawers, cabinets, PC holders, tool holders for the
perforated back panel, and more can be added. All fittings
meet U.S. standard.
Call us at 1-800-921-9494 or visit www.timeeusa.com
MODULE OPTIONS / EXTRAS
Power Supplies: Fixed and adjustable AC and DC power
supplies, dual and programmable units.
APPLICATIONS & INDUSTRIES
A wide range of modules can be fitted to the primary
console creating a highly flexible system that is both
functional and easy to use. Further expansion can be
achieved by adding the secondary console, mounted
under the primary. Calibration modules cover electronic
signal, temperature, loop, and pressure applications.
DESCRIPTION
CalBench is the ultimate multifunction calibration
station from Time Electronics. Each bench is custommade to meet specific user requirements. Offering
versatility and precision it is ideal for laboratories and
workshops in need of multi-product testing that meets
the highest industry standards.
26