SelectBlinds Serene Fabric Vertical Blinds Installation Guide

Refined Fabric Vertical Blinds
CONTENTS
PAGE
Getting Started:
• Tools Needed --------------------------- 1
• Considerations Prior to Installing -- 1
• Parts Included in your Package ---- 1
Installation:
• Installing the Brackets ---------------- 2
• Attaching Valance Clips on Rail ---- 2
• Installing Headrail on Brackets ----- 2
• Installing Vanes ------------------------ 3
• Installing Valance ---------------------- 3
• Measure and Cut Valance Return -- 3
• Installing Valance Return ------------ 3
• Operating Your Blinds ---------------- 3
• Cleaning Blinds ------------------------ 3
Thank you for choosing our Refined Fabric Vertical Blinds for your Residential or Commercial
space.
In this guide, you will find useful information about installation, child safety, cleaning, and warranty
when using your blind.
READ ALL INSTALLATION INSTRUCTIONS BEFORE INSTALLING
PLEASE KEEP FOR FUTURE REFERENCE / TROUBLESHOOTING
SUGGESTED TOOLS (not included)
DRILL
SCREWDRIVER
1/16" drill bit,
and 1/4"
hex driver
Flat blade, Phillips, or
1/4" hex driver
LEVEL
TAPE MEASURE
PENCIL
LADDER
INCLUDED IN YOUR PACKAGE
Standard Vertical Fabric Blind
THINGS TO CONSIDER BEFORE YOU
BEGIN YOUR INSTALLATION
Your new blind is custom made to your specifications
from the finest fabrics available. The installation
should be easy and your blind will look elegant.
MOUNTING OPTIONS:
Inside mount (IB):
The Blind is mounted inside to the top of
the window frame.
Mounting L Bracket
Ceiling Clip
Valance Clip
Outside mount (OB):
The Blind is mounted either on or outside
the window frame.
Screw & Nut
Use to connect Ceiling Clip to
Mounting L Bracket
Mounting Screw
Standard
Mounting NOTES:
Mounting screws provided are suitable for most
mounting surfaces. See below for additional
suggestions.
• For wallboard or plaster: Use hollow wall
anchors for added support. (not included)
• For concrete, stone, brick or tile: Use an
appropriate drill and appropriate anchors
before fastening the screws. (not included)
• For metal surfaces: Pre-drill holes and use
appropriate anchors before fastening the
screws. (not included)
Valance
Valance Connector
if outside mount
Valance Return
if outside mount
Page 1
Rounded
1
ILLUSTRATION
PLACEMENT AND INSTALLING BRACKETS
Inside mount: Mount ceiling brackets with a minimum of
2” from the back edge of the window sill.
Outside Mount: Use wall anchors for a secure hold.
Mark the position of the L bracket as illustrated. You will
need min 2” space to secure brackets.
2” from back edge
of window frame
Wall
(Above Frame)
ILLUSTRATION
2
ATTACH VALANCE CLIPS ON RAIL
3
INSTALL HEADRAIL ON BRACKETS
ILLUSTRATION
• Insert headrail at an angle facing the window.
• Hook in back of bracket first and then push upward to snap it into the front of bracket.
(Inside Mount)
(Outside Mount)
ILLUSTRATION
4
INSTALL VANES ON
HEADRAIL
Insert vanes in open position.
Page 2
ILLUSTRATION
5
INSTALL VALANCE ON CLIPS
ON HEADRAIL
OPERATING YOUR VERTICAL BLINDS
VANE ROTATION
(squeeze)
ILLUSTRATION
MEASURE AND CUT
VALANCE RETURN
6
(FOR OUTSIDE MOUNT ONLY)
Measuring: 1. Measure edge of wall to valance.
2. Mark it.
3. Cut using scissors.
OPEN AND CLOSE
1.
2.
CLEANING YOUR BLIND:
Lightly wipe with a damp cloth or dust for regular
maintenance.
NOTE:
The Warning labels on the bottom-rails of corded window
coverings contain important safety information. These warning
labels are designed to be permanent, in accordance with the
industry's safety standards, and must not be removed.
3.
7
ILLUSTRATION
INSTALL VALANCE RETURN
(FOR OUTSIDE MOUNT ONLY)
Page 3
">