Sugatsune ESR-10-28 STAINLESS STEEL DRAWER SLIDE Installation Instruction

ESR-10
STAINLESS STEEL DRAWER SLIDE
THREE MEMBER FULL EXTENSION
POSITIVE STOP
• Full extension.
• Positive stop.
• Non-handed.
• Heavy duty.
* Mount with M4 or #8 Binding, Pan, or Truss head
screws.
25.4 mm=1"
No.
Part
Outer Rail
Tie Plate
Intermediate Member
Retainer
Balls





Item No.
Slide Length
ESR-10-12
ESR-10-14
ESR-10-16
ESR-10-18
ESR-10-20
ESR-10-22
ESR-10-24
ESR-10-26
ESR-10-28
305
355.8
406.6
457.4
508.2
559
609.8
660.6
711.4
(12")
(14")
(16")
(18")
(20")
(22")
(24")
(26")
(28")
Travel Length
319
369.8
420.6
471.4
522.2
573
623.8
674.6
725.4
(12-9/16")
(14-9/16")
(16-9/16")
(18-9/16")
(20-9/16")
(22-9/16")
(24-9/16")
(26-9/16")
(28-9/16")
A
212.7
238.1
263.5
288.9
314.3
339.7
B
C
149.2
200
250.8
301.6
352.4
403.2
454
504.8
555.6
273
323.8
374.6
425.4
476.2
527
577.8
628.6
679.4
# of Holes
16
20
Load Rating
(kg/pair)
272 (599 lbs)
268 (590 lbs)
259 (570 lbs)
250 (550 lbs)
241 (530 lbs)
229 (504 lbs)
216 (475 lbs)
200 (440 lbs)
182 (400 lbs)
Material
304 Stainless Steel
Weight
(g)
1670
2000
2340
2500
2840
3250
3500
3840
4170
Box
(pcs)
8
6
4
MOUNTING INSTRUCTIONS
1. Position front edge of the drawer slide’s cabinet member to meet the rear of the front panel of
drawer when the drawer is in the closed position. Draw a line for the slide when it is level, then
fully extend the slide to mark the screw location to both cabinet and drawer. Make sure that the
position of the slide is at the front edge to meet the rear of the front panel of drawer.
2. Attach the slide to the cabinet using the marks made for the screw holes on both sides of the
cabinet.
3. Attach the slide to the drawer at the previously marked spots. If a retainer or rail covers a screw
hole, slide rail until you see an access hole.
Sugatsune America, Inc.
18101 Savarona Way Carson, CA 90746
Tel 310-329-6373 Fax 310-329-0819
www.sugatsune.com
">