Sugatsune ESR-6-28 STAINLESS STEEL DRAWER SLIDE Installation Instruction

ESR-6
STAINLESS STEEL DRAWER SLIDE
THREE MEMBER FULL EXTENSION
POSITIVE STOP
• Full extension.
• Positive stop.
• Non-handed.
* Mount with M4 or #8 Binding, Pan, or Truss head
screws.
25.4 mm=1"
No.
Part
Outer Rail
Inner Rail
Retainer
Intermediate Member
Balls





Item No.
Slide Length
Travel Length
ESR-6-12
ESR-6-14
ESR-6-16
ESR-6-18
ESR-6-20
ESR-6-22
ESR-6-24
ESR-6-26
ESR-6-28
304.8 (12")
355.6 (14")
406.4 (16")
457.2 (18")
508 (20")
558.8 (22")
609.6 (24")
660.4 (26")
711.2 (28")
326 (12-27/32")
377 (14-27/32")
428 (16-27/32")
479 (18-55/64")
529 (20-53/64")
580 (22-27/32")
631 (24-27/32")
682 (26-26/32")
732 (28-13/16")
A
212.7
238.1
263.5
288.9
314.3
339.7
B
C
D
149.2
200
250.8
301.6
352.4
403.2
454
504.8
555.6
260.3
311.1
361.9
412.7
463.5
514.3
565.1
615.9
666.7
273
323.8
374.6
425.4
476.2
527
577.8
628.6
679.4
# of Holes
Outer Rail
7
8
Load Rating
(kg/pair)
60 (132 lbs)
59 (130 lbs)
57 (126 lbs)
56 (123 lbs)
53 (117 lbs)
51 (112 lbs)
49 (108 lbs)
47 (104 lbs)
45 ( 99 lbs)
Material
304 Stainless Steel
Weight
(g)
610
710
810
920
980
1120
1230
1330
1440
Box
(pcs)
16
MOUNTING INSTRUCTIONS
1. Position front edge of the drawer slide’s cabinet member to meet the rear of the front panel of
drawer when the drawer is in the closed position. Draw a line for the slide when it is level, then
fully extend the slide to mark the screw location to both cabinet and drawer. Make sure that the
position of the slide is at the front edge to meet the rear of the front panel of drawer.
2. Attach the slide to the cabinet using the marks made for the screw holes on both sides of the
cabinet.
3. Attach the slide to the drawer at the previously marked spots. If a retainer or rail covers a screw
hole, slide rail until you see an access hole.
Sugatsune America, Inc.
18101 Savarona Way Carson, CA 90746
Tel 310-329-6373 Fax 310-329-0819
www.sugatsune.com
">