Asus VE228D User guide

VE228 Series
LCD Monitor
User Guide
Contents
Notices.......................................................................................................... iii
Safety.information....................................................................................... iv
Care.&.Cleaning............................................................................................ v
ii
1.1.
Welcome!....................................................................................... 1-1
1.2.
Package.contents.......................................................................... 1-1
1.3.
Monitor.introduction..................................................................... 1-2
1.3.1
Frontview....................................................................... 1-2
1.3.2
Backview........................................................................ 1-3
2.1.
Assembling.the.monitor.base...................................................... 2-1
2.2.
Adjusting.the.monitor................................................................... 2-1
2.3.
D
. etaching.the.arm/base.(for.VESA.wall.mount)......................... 2-2
2.4.
Connecting.the.cables.................................................................. 2-3
2.5.
Turning.on.the.monitor................................................................. 2-4
3.1.
OSD.(On-Screen.Display).menu.................................................. 3-1
3.1.1
Howtoreconfigure.......................................................... 3-1
3.1.2
OSDFunctionIntroduction.............................................. 3-1
3.2.
Specifications.summary............................................................... 3-4
3.3.
Troubleshooting.(FAQ)................................................................. 3-9
3.4.
Supported.operating.modes...................................................... 3-10
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
•
This device may not cause harmful interference, and
•
This device must accept any interference received including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with manufacturer’s
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is
required to assure compliance with FCC regulations. Changes or modifications
to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
As an Energy Star® Partner, our company has determined that this product meets
the Energy Star® guidelines for energy efficiency.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regulations of the
Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
iii
Safety information
•
Beforesettingupthemonitor,carefullyreadallthedocumentationthatcame
withthepackage.
•
Topreventfireorshockhazard,neverexposethemonitortorainormoisture.
•
Nevertrytoopenthemonitorcabinet.Thedangeroushighvoltagesinsidethe
monitormayresultinseriousphysicalinjury.
•
Ifthepowersupplyisbroken,donottrytofixitbyyourself.Contactaqualified
servicetechnicianoryourretailer.
•
Beforeusingtheproduct,makesureallcablesarecorrectlyconnectedandthe
powercablesarenotdamaged.Ifyoudetectanydamage,contactyourdealer
immediately.
•
Slotsandopeningsonthebackortopofthecabinetareprovidedfor
ventilation.Donotblocktheseslots.Neverplacethisproductnearorovera
radiatororheatsourceunlessproperventilationisprovided.
•
Themonitorshouldbeoperatedonlyfromthetypeofpowersourceindicated
onthelabel.Ifyouarenotsureofthetypeofpowersupplytoyourhome,
consultyourdealerorlocalpowercompany.
•
Usetheappropriatepowerplugwhichcomplieswithyourlocalpower
standard.
•
Donotoverloadpowerstripsandextentioncords.Overloadingcanresultin
fireorelectricshock.
•
Avoiddust,humidity,andtemperatureextremes.Donotplacethemonitorin
anyareawhereitmaybecomewet.Placethemonitoronastablesurface. •
Unplugtheunitduringalightningstormorifitwillnotbeusedforalongperiod
oftime.Thiswillprotectthemonitorfromdamageduetopowersurges.
•
Neverpushobjectsorspillliquidofanykindintotheslotsonthemonitor
cabinet.
•
Toensuresatisfactoryoperation,usethemonitoronlywithULlisted
computerswhichhaveappropriateconfiguredreceptaclesmarkedbetween
100-240VAC.
•
Ifyouencountertechnicalproblemswiththemonitor,contactaqualified
servicetechnicianoryourretailer.
Thissymbolofthecrossedoutwheeledbinindicatesthattheproduct(electrical,
electronicequipment,andmercury-containingbuttoncellbattery)shouldnot
beplacedinmunicipalwaste.Pleasechecklocalregulationsfordisposalof
electronicproducts.
AEEE yönetmeliğine uygundur
iv
Care & Cleaning
•
Before you lift or reposition your monitor, it is better to disconnect the cables
and power cord. Follow the correct lifting techniques when positioning the
monitor. When lifting or carrying the monitor, grasp the edges of the monitor.
Do not lift the display by the stand or the cord.
•
Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor
surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed
with a cloth dampened with mild cleaner.
•
Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended
for use with the monitor. Never spray cleaner directly on the screen, as it may
drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
•
The screen may flicker during the initial use due to the nature of the fluorescent
light. Turn off the Power Switch and turn it on again to make sure that the
flicker disappears. •
You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
•
When the same image is displayed for hours, an afterimage of the previous
screen may remain after switching the image. The screen will recover slowly or
you can turn off the Power Switch for hours.
•
When the screen becomes black or flashes, or cannot work anymore, contact
your dealer or service center to fix it. Do not repair the screen by yourself! Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when
trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.
v
Where to find more information
Refer to the following sources for additional information and for product and
software updates.
1.
ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
2.
Optional documentation
Your product package may include optional documentation that may have
been added by your dealer. These documents are not part of the standard
package.
vi
1.1
Welcome!
Thank you for purchasing the ASUS® LCD monitor!
The latest widescreen LCD monitor from ASUS provides a crisper, broader, and
brighter display, plus a host of features that enhance your viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the monitor brings you!
1.2
Package contents
Check your package for the following items:
LCD monitor
Monitor base and screw
Warranty card
Quick start guide
Power cord
VGA cable
DVI cable
Audio cable
If any of the above items is damaged or missing, contact your retailer
immediately.
ASUS VE228 Series LCD Monitor
1-1
1.3
Monitor introduction
1.3.1
Front view
VE228H
S/A
Volume/Down
Menu
Brightness/Up
VE228T/
VE228S
S
Volume/Down
Menu
Brightness/Up
A
Power Key
VE228N/
VE228D
S
Contrast/Down Menu
Brightness/Up
A
Power Key
1
6
1
1.
, 4
5
Button:
Use this hotkey to switch from five video preset modes (Standard Mode,
Theater Mode, Game Mode, Night View Mode, Scenery Mode) with
SPLENDID™ Video Enhancement Technology. (
,
)
•
Exit the OSD menu or go back to the previous menu as the OSD menu
is active. (
, )
•
Automatically adjust the image to its optimized position, clock, and phase by
pressing this button for 2-4 seconds (for VGA mode only.) (
, )
•
Press this button to decrease the value of the function selected or move
left/down to the previous function.
•
This is also a hotkey for Volume adjustment. (
)
•
This is also a hotkey for Contrast adjustment. (
)
,
Button:
MENU Button:
•
1-2
,
3
•
2.
3.
2
Input Select Power Key
Turns on the OSD menu.
Chapter 1: Product introduction
•
Press this button to enter/select the icon (function) highlighted while the OSD is activated.
4.
Button:
•
Press this button to increase the value of the function selected or move
right/up to the next function.
•
This is also a hotkey for Brightness adjustment.
5.
Button:
•
Press this button to cycle through the available input sources.
Press
(Input Select button) to display HDMI signals after you connect
HDMI cable with the monitor.
6.
Power button/power indicator
•
Press this button to turn the monitor on/off
•
The color definition of the power indicator is as the below table.
Status
Blue
Amber
OFF
1.3.2
Description
ON
Standby mode
OFF
Back view
Screw holes for
VESA wall mount
Kensington lock
slot
Rear connectors
VE228D
VE228N
VE228H
VE228T
1
2
3
4
ASUS VE228 Series LCD Monitor
5
6
VE228S
3
1
5
6
1-3
2.5
Turning on the monitor
Gently press the power button . See page 1-3 for the location of the power button.
The power indicator lights up in blue to show that the monitor is ON.
2-4
Chapter 2: Setup
2.1
Assembling the monitor base
To assemble the monitor base:
1.
Have the front of the monitor face down on a table.
2.
Assemble the base and the arm by aligning the arrow marks on the base and
the arm.
3.
Fix the base to the arm by fastening the bundled screw.
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
R el
ea se
L o ck
2
1
2.2
Adjusting the monitor
•
or optimal viewing, we recommend that you look at the full face of the
F
monitor, then adjust the monitor to the angle that is most comfortable for you.
•
Hold the stand to prevent the monitor from falling when you change its angle.
•
The recommended adjusting angle is from -5˚ to 20˚.
-5˚~20˚
It is normal that the monitor slightly shakes while you adjust the the viewing
angle.
ASUS VE228 Series LCD Monitor
2-1
2.3Detaching the arm/base
(for VESA wall mount)
The detachable arm/base of this LCD monitor is specially designed for VESA wall
mount.
To detach the arm/base:
1.
Have the front of the monitor face down on a table.
2.
Remove the rubbers in the four screw holes (Figure 1).
3.
Use a screwdriver to remove the two screws on the arm (Figure 2), then slide
out the arm/base to detach it from the monitor (Figure 2).
Rubbers in the
screw holes
1
Rele
ase
Loc
k
1
ase
Lock
Arm/base
Rele
Figure 1
2
Figure 2
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
2-2
Chapter 2: Setup
2.4
1.
Connecting the cables
Connect the cables as the following instructions:
VE228D
VE228N
VE228T
VE228H
VE228S
Audio-in
Earphone jack
HDMI
VGA
Audio-in
VGA
•
To connect the audio cable: connect one end of the audio cable to the
monitor’s Audio-in port, the other end to the computer's audio-out port.
•
To connect the power cord: connect one end of the power cord securely to
the monitor’s AC input port, the other end to a power outlet.
•
To connect the VGA/DVI/HDMI cable:
a. Plug the VGA/DVI/HDMI connector to the LCD monitor’s VGA/DVI/HDMI
port.
b. Connect the other end of the VGA/DVI/HDMI cable to your computer's
VGA/DVI/HDMI.
c.
•
Tighten the two screws to secure the VGA/DVI connector.
To use earphones: connect the end with plug type to the monitor’s earphone
jack.
When these cables are connected, you can choose the desired signal from the
Input Select item of the OSD functions.
2.
Gather all the cables with the cable management slot.
Cable management
slot
ASUS VE228 Series LCD Monitor
2-3
2.5
Turningonthemonitor
Gently press the power button . See page 1-3 for the location of the power button.
The power indicator lights up in blue to show that the monitor is ON.
2-4
Chapter 2: Setup
3.1
OSD (On-Screen Display) menu
3.1.1
How to reconfigure
1.
Press the MENU button to activate the
OSD menu.
2.
Press
(or
), and
to navigate through the functions.
Highlight and activate the desired function by pressing the MENU button. If
the function selected has a sub-menu, press
(or
), and
again to navigate through the sub-menu functions. Highlight and activate the
desired sub-menu function by pressing the MENU button.
3.
Press
function.
4.
To exit the OSD menu, press the
3 to adjust any other function. 3.1.2
1.
(or
), and
to change the settings of the selected
or
button. Repeat step 2 and step
OSD Function Introduction
Spendid
This function contains five sub-functions
you can select for your preference. Each
mode has the Reset selection, allowing
you to maintain your setting or return to the
preset mode.
• Scenery Mode: best choice for scenery photo display with SPLENDID™
Video Enhancement.
•
Standard Mode: best choice for document editing with SPLENDID™
Video Enhancement.
•
Theater Mode: best choice for movie with SPLENDID™ Video
Enhancement.
•
Game Mode: best choice for game playing with SPLENDID™ Video
Enhancement.
•
Night View Mode: best choice for dark-scene game or movie with
SPLENDID™ Video Enhancement.
•
In the Standard Mode, the Saturation and Sharpness functions are not
user-configurable.
•
In the other modes, the sRGB function is not user-configurable.
ASUS VE228 Series LCD Monitor
3-1
2.
Image
You can adjust brightness, contrast,
sharpness, saturation, position (VGA only),
and focus (VGA only) from this menu.
•
Brightness: the adjusting range is from 0 to 100.
activate this function.
•
Contrast: the adjusting range is from 0 to 100.
•
ASCR: turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
•
Sharpness: the adjusting range is from 0 to 100.
•
Saturation: the adjusting range is from 0 to 100.
•
Position: adjusts the horizontal position (H-Position) and the vertical
position (V-Position) of the image. The adjusting range is from 0 to 100.
Focus: reduces Horizonal-line noise and Vertical-line noise of the image
by adjusting (Phase) and (Clock) separately. The adjusting range is from
0 to 100.
•
3.
is a hotkey to
•
Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
•
Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.
Color
Select the image color you like from this
function.
•
•
Color Temp.: contains five color modes including Cool, Normal, Warm,
sRGB, and User mode.
Skin Tone: contains three color modes including Reddish, Natural, and
Yellowish.
In the User mode, colors of R (Red), G (Green), and B (Blue) are userconfigurable; the adjusting range is from 0-100.
3-2
Chapter 3: General Instruction 4.
InputSelect
In this function, you can select your
desired input source.
5.
SystemSetup
Allow you to adjust the system.
•
SplendidDemoMode:turns on/off ASUS Splendid Demo function.
•
Volume: the adjusting range is from 0 to 100.
activate this function.
•
AspectControl: adjusts the aspect ratio to full, 4:3, 1:1 or OverScan.
is a hotkey to
4:3 is only available when input source is in 4:3 format. OverScan is only
available for the HDMI input source.
•
OSDSetup:
*
Adjusts the horizontal postition (H-Position)/the vertical position
(V-Position) of the OSD from 0 to 100.
*
Adjusts the OSD timeout from 10 to 120.
*
Enables or disables the DDC/CI function.
•
Language: there are 11 languages for your selection, including English,
German, Italian, French, Dutch, Spanish, Russian, Traditional Chinese,
Simplified Chinese, Japanese, and Korean.
•
•
Information: shows the monitor information.
AllReset: “Yes” allows you to restore the default setting.
ASUS VE228 Series LCD Monitor
3-3
3.2
Specifications summary (VE228H)
Panel Type
Panel size
Max. Resolution
Pixel pitch
Brightness (Typ.)
Contrast Ratio (Typ.)
Contrast Ratio (Max.)
Viewing angle(H/V) CR>10
Display colors
Response time
SPLENDID™ Video
Enhancement
SPLENDID™ selection
Auto adjustment
Color temperature selection
Skin-Tone selection
Digital input
Analog input
Audio-in port
Earphone jack
Colors
Speaker (Built-in)
Power LED
VESA wall mount
Tilt
Kensington lock
Voltage rating
Power consumption
TFT LCD
21.5" (54.6 cm, 16:9) wide screen
1920 x 1080
0.248 mm
250 cd/m2
1000:1
10000000:1 (with ASCR on)
170˚/160˚
16.7 M
5 ms
Yes
Temperature (Operating)
0˚C~40˚C
Temperature .
(Non-operating)
Dimension (W x H x D)
-20˚C~+60˚C
Weight (Esti.)
Multi-languages
Accessories
Regulation approvals.
5 video preset modes (by hotkey)
Yes (by hotkey)
5 color temperatures
3 skin-tones
DVI-D with HDCP; HDMI v1.3
D-Sub
3.5 mm Mini-jack
Yes
Black
1 W x 2 Stereo, RMS
Blue (On)/ Amber (Standby)
100 x 100 mm
-5˚~+20˚
Yes
AC: 100~240V
Power On : < 35 W, Standby: < 1 W, Power Off: <1 W
512.84 mm x 385.96 mm x 201.01 mm (machine)
576 mm x 468 mm x 148 mm (package)
4.1 kg (Net) ; 6.1 kg (Gross)
11 languages (English, German, Italian, French, Dutch,
Spanish, Russian, Traditional Chinese, Simplified
Chinese, Japanese, Korean)
VGA cable, DVI cable, Audio cable, Power cord, Quick
start guide, Warranty card
Energy Star®, CB, CE, Gost-R, CCC, UL/cUL, FCC,
C-Tick, BSMI, VCCI, RoHS, WEEE, PSB, J-MOSS, EuP,
Windows Vista, Windows 7 WHQL
*Specifications are subject to change without notice.
3-4
Chapter 3: General Instruction Specifications summary (VE228T)
Panel Type
Panel size
Max. Resolution
Pixel pitch
Brightness (Typ.)
Contrast Ratio (Typ.)
Contrast Ratio (Max.)
Viewing angle(H/V) CR>10
Display colors
Response time
SPLENDID™ Video
Enhancement
SPLENDID™ selection
Auto adjustment
Color temperature selection
Skin-Tone selection
Digital input
Analog input
Audio-in port
Earphone jack
Colors
Speaker (Built-in)
Power LED
VESA wall mount
Tilt
Kensington lock
Voltage rating
Power consumption
TFT LCD
21.5" (54.6 cm, 16:9) wide screen
1920 x 1080
0.248 mm
250 cd/m2
1000:1
10000000:1 (with ASCR on)
170˚/160˚
16.7 M
5 ms
Yes
Temperature (Operating)
0˚C~40˚C
Temperature .
(Non-operating)
Dimension (W x H x D)
-20˚C~+60˚C
Weight (Esti.)
Multi-languages
Accessories
Regulation approvals.
5 video preset modes (by hotkey)
Yes (by hotkey)
5 color temperatures
3 skin-tones
DVI-D with HDCP
D-Sub
3.5 mm Mini-jack
No
Black
1 W x 2 Stereo, RMS
Blue (On)/Amber (Standby)
100 x 100 mm
-5˚~+20˚
Yes
AC: 100~240V
Power On : < 35 W, Standby: < 1 W, Power Off: <1 W
512.84 mm x 385.96 mm x 201.01 mm (machine)
576 mm x 468 mm x 148 mm (package)
4.1 kg (Net) ; 6.1 kg (Gross)
11 languages (English, German, Italian, French, Dutch,
Spanish, Russian, Traditional Chinese, Simplified
Chinese, Japanese, Korean)
VGA cable, DVI cable, Audio cable, Power cord, Quick
start guide, Warranty card
Energy Star®, CB, CE, Gost-R, CCC, UL/cUL, FCC,
C-Tick, BSMI, VCCI, RoHS, WEEE, PSB, J-MOSS, EuP,
Windows Vista, Windows 7 WHQL
*Specifications are subject to change without notice.
ASUS VE228 Series LCD Monitor
3-5
Specifications summary (VE228N)
Panel Type
Panel size
Max. Resolution
Pixel pitch
Brightness (Typ.)
Contrast Ratio (Typ.)
Contrast Ratio (Max.)
Viewing angle(H/V) CR>10
Display colors
Response time
SPLENDID™ Video
Enhancement
SPLENDID™ selection
Auto adjustment
Color temperature selection
Skin-Tone selection
Digital input
Analog input
Audio-in port
Earphone jack
Colors
Speaker (Built-in)
Power LED
VESA wall mount
Tilt
Kensington lock
Voltage rating
Power consumption
TFT LCD
21.5" (54.6 cm, 16:9) wide screen
1920 x 1080
0.248 mm
250 cd/m2
1000:1
10000000:1 (with ASCR on)
170˚/160˚
16.7 M
5 ms
Yes
Temperature (Operating)
0˚C~40˚C
Temperature .
(Non-operating)
Dimension (W x H x D)
-20˚C~+60˚C
Weight (Esti.)
Multi-languages
Accessories
Regulation approvals.
5 video preset modes (by hotkey)
Yes (by hotkey)
5 color temperatures
3 skin-tones
DVI-D with HDCP
D-Sub
No
No
Black
No
Blue (On)/ Amber (Standby)
100 x 100 mm
-5˚~+20˚
Yes
AC: 100~240V
Power On : < 35 W, Standby: < 1 W, Power Off: <1 W
512.84 mm x 385.96 mm x 201.01 mm (machine)
576 mm x 468 mm x 148 mm (package)
4.1 kg (Net) ; 6.1 kg (Gross)
11 languages (English, German, Italian, French, Dutch,
Spanish, Russian, Traditional Chinese, Simplified
Chinese, Japanese, Korean)
VGA cable, DVI cable, Power cord, Quick start guide,
Warranty card
Energy Star®, CB, CE, Gost-R, CCC, UL/cUL, FCC,
C-Tick, BSMI, VCCI, RoHS, WEEE, PSB, J-MOSS, EuP,
Windows Vista, Windows 7 WHQL
*Specifications are subject to change without notice.
3-6
Chapter 3: General Instruction Specifications summary (VE228S)
Panel Type
Panel size
Max. Resolution
Pixel pitch
Brightness (Typ.)
Contrast Ratio (Typ.)
Contrast Ratio (Max.)
Viewing angle(H/V) CR>10
Display colors
Response time
SPLENDID™ Video
Enhancement
SPLENDID™ selection
Auto adjustment
Color temperature selection
Skin-Tone selection
Digital input
Analog input
Audio-in port
Earphone jack
Colors
Speaker (Built-in)
Power LED
VESA wall mount
Tilt
Kensington lock
Voltage rating
Power consumption
TFT LCD
21.5" (54.6 cm, 16:9) wide screen
1920 x 1080
0.248 mm
250 cd/m2
1000:1
10000000:1 (with ASCR on)
170˚/160˚
16.7 M
5 ms
Yes
Temperature (Operating)
0˚C~40˚C
Temperature .
(Non-operating)
Dimension (W x H x D)
-20˚C~+60˚C
Weight (Esti.)
Multi-languages
Accessories
Regulation approvals.
5 video preset modes (by hotkey)
Yes (by hotkey)
5 color temperatures
3 skin-tones
No
D-Sub
3.5 mm Mini-jack
No
Black
1 W x 2 Stereo
Blue (On)/ Amber (Standby)
100 x 100 mm
-5˚~+20˚
Yes
AC: 100~240V
Power On : < 35 W, Standby: < 1 W, Power Off: <1 W
512.84 mm x 385.96 mm x 201.01 mm (machine)
576 mm x 468 mm x 148 mm (package)
4.1 kg (Net) ; 6.1 kg (Gross)
11 languages (English, German, Italian, French, Dutch,
Spanish, Russian, Traditional Chinese, Simplified
Chinese, Japanese, Korean)
VGA cable, Audio cable, Power cord, Quick start guide,
Warranty card
Energy Star®, CB, CE, Gost-R, CCC, UL/cUL, FCC,
C-Tick, BSMI, VCCI, RoHS, WEEE, PSB, J-MOSS, EuP,
Windows Vista, Windows 7 WHQL
*Specifications are subject to change without notice.
ASUS VE228 Series LCD Monitor
3-7
Specifications summary (VE228D)
Panel Type
Panel size
Max. Resolution
Pixel pitch
Brightness (Typ.)
Contrast Ratio (Typ.)
Contrast Ratio (Max.)
Viewing angle(H/V) CR>10
Display colors
Response time
SPLENDID™ Video
Enhancement
SPLENDID™ selection
Auto adjustment
Color temperature selection
Skin-Tone selection
Digital input
Analog input
Audio-in port
Earphone jack
Colors
Speaker (Built-in)
Power LED
VESA wall mount
Tilt
Kensington lock
Voltage rating
Power consumption
TFT LCD
21.5" (54.6 cm, 16:9) wide screen
1920 x 1080
0.248 mm
250 cd/m2
1000:1
10000000:1 (with ASCR on)
170˚/160˚
16.7 M
5 ms
Yes
Temperature (Operating)
0˚C~40˚C
Temperature .
(Non-operating)
Dimension (W x H x D)
-20˚C~+60˚C
Weight (Esti.)
Multi-languages
Accessories
Regulation approvals.
5 video preset modes (by hotkey)
Yes (by hotkey)
5 color temperatures
3 skin-tones
No
D-Sub
No
No
Black
No
Blue (On)/ Amber (Standby)
100 x 100 mm
-5˚~+20˚
Yes
AC: 100~240V
Power On : < 35 W, Standby: < 1 W, Power Off: <1 W
512.84 mm x 385.96 mm x 201.01 mm (machine)
576 mm x 468 mm x 148 mm (package)
4.1 kg (Net) ; 6.1 kg (Gross)
11 languages (English, German, Italian, French, Dutch,
Spanish, Russian, Traditional Chinese, Simplified
Chinese, Japanese, Korean)
VGA cable, Power cord, Quick start guide, Warranty card
Energy Star®, CB, CE, Gost-R, CCC, UL/cUL, FCC,
C-Tick, BSMI, VCCI, RoHS, WEEE, PSB, J-MOSS, EuP,
Windows Vista, Windows 7 WHQL
*Specifications are subject to change without notice.
3-8
Chapter 3: General Instruction 3.3
Troubleshooting (FAQ)
Problem
Power LED is not ON
The power LED lights amber and there is
no screen image
Screen image is too light or dark
Possible Solution
• Press the button to check if the monitor
is in the ON mode.
• Check if the power cord is properly
connected to the monitor and the power
outlet.
• Check if the monitor and the computer are
in the ON mode.
• Make sure the signal cable is properly
connected the monitor and the computer.
• Inspect the signal cable and make sure
none of the pins are bent.
• Connect the computer with another
available monitor to check if the computer
is properly working.
• Adjust the Contrast and Brightness
settings via OSD.
Screen image is not centered or sized
properly
• Press the
or
button for two
seconds to automatically adjust the image.
(for VGA mode only)
• Adjust the H-Position or V-Position
settings via OSD.
Screen image bounces or a wave pattern is • Make sure the signal cable is properly
present in the image
connected to the monitor and the
computer.
• Move electrical devices that may cause
electrical interference.
Screen image has color defects (white does • Inspect the signal cable and make sure
not look white)
that none of the pins are bent.
• Perform Reset via OSD.
• Adjust the R/G/B color settings or select
the Color Temperature via OSD.
Screen image is blurry or fuzzy
• Press the
or
button for two
•
No sound or sound is low
•
•
•
ASUS VE228 Series LCD Monitor
seconds to automatically adjust the image
(for VGA mode only).
Adjust the Phase and Clock settings via
OSD.
Ensure that the audio cable is properly
connected to the monitor and the
computer.
Adjust the volume settings of both your
monitor and computer.
Ensure that the computer sound card
driver is properly installed and activated.
3-9
3.4
Supportedoperatingmodes
Resolution
Frequency
640x480
Horizontal
Frequency
31.47(N)
VerticalFrequency Pixel(MHz)
(Hz)
59.94(N)
25.18
640x480
35.00(N)
66.66(N)
30.24
31.5
640x480
37.87(N)
72.82(N)
640x480
37.5(N)
75.00(N)
31.5
720x400
31.47(N)
70.08(P)
28.32
800x600
35.16(P)
56.25(P)
36.00
800x600
37.88(P)
60.32(P)
40.00
800x600
48.08(P)
72.12(P)
50.00
800x600
46.86(P)
75.00(P)
49.50
832X624
49.72(P/N)
74.55(P/N)
57.28
1024x768
48.36(N)
60.00(N)
65.00
1024x768
56.476(N)
70.069(N)
75.00
1024x768
60.02(N)
75.00(N)
78.75
1152x864
67.5(P/N)
75.00(P/N)
108.00
1280x960
60.00(P)
60.00(N)
108.00
1280x1024
63.98(P)
60.02(P)
108.00
1280x1024
79.98(P)
75.02(P)
135.00
1366x768
47.712(P)
59.79(P)
85.50
1440x900
55.94(N)
59.89(P)
106.50
1600x1200
75.00(P)
60.00(P)
162.00
1680x1050
65.29(N)
60.00(P)
146.25
1920x1080
67.5(P)
60.00(P)
148.5
*Modesnotlistedinthetablemaynotbesupported.Foroptimalresolution,werecommendthat
youchooseamodelistedinthetableabove.
*ThismonitorsupportsfullHD(480p,576p,720p,1080i/p)videocontentfromgameconsoles,DVD
playersandotherconsumervideodevicesviaHDMI.
3-10
Chapter 3: General Instruction