2014 bwa Setting up your WiFi
CONTROL YOUR TUB
AnytimeAnywhereAnyplace
bwa™ Wi-Fi Setup Guide - How To connect your spa to the internet
CONTROL YOUR SPA
In Your Backyard • In Your House • In Your Office • Any Wi-Fi Hotspot • Any 3G/4G Data Network
TABLE OF CONTENTS
1. Control Your Hot Tub From Your Smartphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Getting Ready. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3. Balboa Worldwide App. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4. Helpful Tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5. Frequently Asked Questions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
6. Wireless Troubleshooting Issues. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
7. Regulatory Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 - 25
Control Your Hot Tub From Your Smartphone
The Balboa Worldwide App (bwa™), is an app for your smart device (Android™ or iPhone®) that allows you to access your hot tub
via a direct connection anywhere in the local proximity of your tub, anywhere in your house that you can connect to your local
Wi-Fi network, or anywhere in the World you have an Internet connection to your smart device via 3G, 4G, or Wi-Fi hot spots*.
With the bwa app, you can ensure that your hot tub will be ready whenever you want to take a dip. Instead of going outside and
pressing buttons on the topside panel, the app lets you start the tub and change settings from your smartphone or tablet.
The app provides full interface control so you can set the temperature, turn pumps on and off and even set filtration cycles.
You can access your tub from the
comfort of inside your home, your
office before you leave work, or on your
way back from your get-a-way holiday.
You can set your own mood and
personal settings, so your tub is set
to how you like when you arrive.
* Check with your carrier for Internet charges as the bwa app transmits data to & from a server and depending on your data plan, you may experience additional monthly data charges.
3
Your Single Source Solution.
We reserve the right to change technical data without further notice.
p 714.384.0384 | f 714-384-0385
0713WIFISG. No copies authorized. All rights reserved. ©2013 Balboa Water Group.
Getting Ready
You’re just several easy steps away from connecting
Equipment Configuration
your tub to your home network and the Internet.
Before you begin, you might want to record some
information for your records and to help troubleshoot
your setup if needed.
______________________________________________________
Wi-Fi Module S/N (Located on your bwa™ module)
______________________________________________________
Smart Device (Is your smart device an iPhone, iPad, Galaxy 4S,..etc?)
STOP!
Before you continue on you need to know your
wireless name, password and encryption.
If you don’t please contact your adminstrator, the
person(s) who helped setup your home wireless
router, or check your equipment manuals. You will
also need to make sure you have wireless internet
connection at your tub.
______________________________________________________
BP System Serial Number (Located on your spa system)
______________________________________________________
Smart Device OS (What is your smart phone operating system?)
______________________________________________________
Wi-Fi Router Manufacturer
______________________________________________________
Internet Provider (Time Warner, DSL, Dish, etc)
______________________________________________________
Cellular Data Provider (Is your smart phone data 3G or 4G?)
______________________________________________________
Local / Home Network SSID (What is your home wireless network name?)
______________________________________________________
Key (Password) (What is your home wireless password)
______________________________________________________
Encryption (None, WEP, WPA) (What is your home wireless security.)
4
Your Single Source Solution.
We reserve the right to change technical data without further notice.
p 714.384.0384 | f 714-384-0385
0713WIFISG. No copies authorized. All rights reserved. ©2013 Balboa Water Group.
Step 1
Make sure you are near your tub. Go to your Wi-Fi
Download the app to your smart device from either
the Google® Play or the iTunes® store. Once you
have it loaded on your phone you are ready to
connect to your hot tub.
settings screen and look for the BWG SPA network
(it will be named similar to BWGSpa_12345). In our
example it is BWGSpa_0E608F and connect to it. No
password is needed.
Scan the QR code below to take you directly to
the the download page.
Google® Play Store
iTune® App Store
Step 2
Make sure your device’s Wi-Fi is turned on.
(Check with your device instructions on how to
access your Wi-Fi settings).
For this example we are using an Android™ device,
iOS® would be similar.
5
Your Single Source Solution.
We reserve the right to change technical data without further notice.
p 714.384.0384 | f 714-384-0385
0713WIFISG. No copies authorized. All rights reserved. ©2013 Balboa Water Group.
Step 3
Once you are connected to the BWG Spa network,
start the bwa app and follow the prompts on the
screen. (Your start screen maybe different.)
FROM YOUR START
SCREEN
Press the bwa app button.
Connect to the spa.
Wait until you
are connected
bwa™ APP MAIN
SCREEN
When connected, you
will be taken to the
main app screen.
You are now directly connected
to your hot tub and can control
all the hot tub functions via the
bwa™ app.
6
Your Single Source Solution.
We reserve the right to change technical data without further notice.
p 714.384.0384 | f 714-384-0385
0713WIFISG. No copies authorized. All rights reserved. ©2013 Balboa Water Group.
If you do not have a home Internet network, you can
The easiest way to check if you can see your home Internet
stop here. If you do have a home Internet network,
network from your tub, is to try and connect to it with your
you will be able to control your tub while you are in
smart device next to the tub. Open a browser window and
the near proximity of 65 feet or 20 meters.
connect to the Internet (or any other app that connects
The detailed operation of the bwa app is explained
to the Internet).
in the app user guide which can be found here:
While standing at your tub, if you can connect your smart
http://www.balboawater.com/bwa
device to the Internet through your home network, then the
tub bwa Wi-Fi module should be able to connect to your
If you have a home Internet network the next step
home network also.
is to connect your tub to it.
Before you connect to your home Internet network
you must be able to see your home network from
your tub.
If you cannot connect to the Internet through your
home network, you may need to move your router
or add a repeater or some other signal booster so you
can see your network at your tub.
It is not possible to connect to the spa via “the cloud”
without a third “device” such as a network router, or device used as a hot spot. If no third device exists the bwa
module operates in local direct connect mode only.
7
Your Single Source Solution.
We reserve the right to change technical data without further notice.
p 714.384.0384 | f 714-384-0385
0713WIFISG. No copies authorized. All rights reserved. ©2013 Balboa Water Group.
You can also try moving the Wi-Fi module to a
You are now ready to connect your tub to your local / home
different spot where you do have coverage in
network. Press the Settings button.
your yard.
Or hang it on the outside of the tub instead
of under the skirt of the tub.
Once you can see your home network you are ready.
On the next screen, you will select the Advanced button to
set up your Wi-Fi network settings
Step 4
Setting up your Local / Home Wi-Fi is a one-time process. Once connected, you will not need to change
your settings again unless your network SSID changes.
8
Your Single Source Solution.
We reserve the right to change technical data without further notice.
p 714.384.0384 | f 714-384-0385
0713WIFISG. No copies authorized. All rights reserved. ©2013 Balboa Water Group.
Balboa Worldwide App
settings screen
advanced settings
The Settings screen allows
you to select the temperature
of the spa, change the
temperature between
Fº & Cº, set time of day,
filter cycles and more.
Now select the Wi-Fi
Settings button, to select your
home network and enter your
password.
On the Wi-Fi screen you can
use the drop down menu to
select your network SSID or you
can enter it in the SSID box.
If you have a router that supports WPS provisioning, select
that box and press the WPS
button on your home router.
For Android™ setup continue
on to the next page, for iOS®
setup skip to Page 14.
You will also need to choose
the type of password
encryption you are using:
Open, WEP, or WPA.
Not all routers support the WPS
function. Check your router’s
instructions for more details.
Press the Advanced button
to setup your Wi-Fi.
The Wi-fi screen
Note: bwa™ clouds currently only
support Open, WEP, and WPA.
9
Your Single Source Solution.
We reserve the right to change technical data without further notice.
p 714.384.0384 | f 714-384-0385
0713WIFISG. No copies authorized. All rights reserved. ©2013 Balboa Water Group.
Balboa Worldwide App
Enter password screen
Select the Key text box to
enter your password if you
have one. Type it in using
the keyboard.
Use the back/return
key when finished entering
confirm screen
Now you will save the password to the hot tub and the
tub will be ready to connect
to your network.
Press the Save Button.
your password. (Android™
use back key).
Wi-Fi LINK SCREEN
You will be asked to confirm
that you want to update
your password to the spa.
You may need to connect to
your home network after you
save the password.
The BWG Spa network will
now disconnect and you will
be controlling your tub via
your home network.
Exit the app and make sure
you are connected to your
home network.
10
Your Single Source Solution.
We reserve the right to change technical data without further notice.
p 714.384.0384 | f 714-384-0385
0713WIFISG. No copies authorized. All rights reserved. ©2013 Balboa Water Group.
Balboa Worldwide App
YOUR SMARTPHONE
Wi-Fi SCREEN
bwa™ WEP SETUP
If you have your home
network setup to automatically connect, the bwa
app will re-connect.
Restart the app and connect
to the tub which will now
be connected to your local/
home network.
iOS setup is similar to
Android except you will need
to type in your SSID and Key
(Password) using your keyboard.
You may need to manually
connect to your local/ home
network.
You can now control your tub
anywhere you can connect to
your local / home network.
To continue the setup, go
to Page 14.
You will also need to choose
the type of password encryption
you are using: Open, WEP,
or WPA.
Note: bwa™ clouds currently only
support Open, WEP, and WPA.
11
Your Single Source Solution.
We reserve the right to change technical data without further notice.
p 714.384.0384 | f 714-384-0385
0713WIFISG. No copies authorized. All rights reserved. ©2013 Balboa Water Group.
bwa™ WSP SETUP
If you have a router that
supports WPS provisioning,
select that button and press
the WPS button on your
home router.
Not all routers support
the WPS function. Check
your router’s instructions
for more details.
Balboa Worldwide App
bwa™ WEP SETUP
Type in the Service Set
Identifier (SSID) this is
the name of your
wireless network.
Then select the Key text box
to enter your password if you
have one. Type it in using the
keyboard.
Now you will save the SSID
& password to the hot tub
and the tub will be ready to
connect to your network.
The BWG Spa network will
now disconnect and you will
be controlling your tub via
your local/home network.
12
Your Single Source Solution.
We reserve the right to change technical data without further notice.
p 714.384.0384 | f 714-384-0385
0713WIFISG. No copies authorized. All rights reserved. ©2013 Balboa Water Group.
You may need to go to your
settings and connect to your
local / home network after
you save the password and
restart the app.
Exit the app and make sure
you are connected to your
home network.
Balboa Worldwide App
CONTROLS MENU
If you have your home
network setup to automatically connect, the bwa app
will re-connect.
Restart the app and connect
to the tub which will now be
connected to your local /
home network.
You may need to manually
connect to your local/home
network.
You can now control your tub
anywhere you can connect to
your local / home network.
You should now be
connected to your
local/home network.
You can now turn on your
pumps & lights by pressing
the Controls button.
On Android™, use the
back/return key to return
to the main app screen.
13
Your Single Source Solution.
We reserve the right to change technical data without further notice.
p 714.384.0384 | f 714-384-0385
0713WIFISG. No copies authorized. All rights reserved. ©2013 Balboa Water Group.
Balboa Worldwide App
On iOS devices, you will see
a Back Button that you will
use for navigating between
screens.
You can now turn on your
pumps & lights by pressing
the Controls button.
If you want to control your
tub away from your local /
home network, make sure
you have an Internet connection on your device (3G
/ 4G / Hotspot).
The equipment for your tub
will automatically show up on
this screen. You can turn the
devices on/off by pressing the
buttons.
Start the app and press the
Connect button. Now you
can control your tube via
the Internet and can
control your tub via your
local/home network.
14
Your Single Source Solution.
We reserve the right to change technical data without further notice.
p 714.384.0384 | f 714-384-0385
0713WIFISG. No copies authorized. All rights reserved. ©2013 Balboa Water Group.
When connected via the Internet a small cloud icon will
appear under the Controls
button letting you know that
you are remotely connected.
Operate your spa by going to
the Controls screen.
Balboa Worldwide App
ENJOY YOUR TUB!
Depending on your coverage
and data speed, the response
time for acknowledging a
device press may vary. You
will know the app is waiting
by the small spinning dots.
15
Your Single Source Solution.
We reserve the right to change technical data without further notice.
p 714.384.0384 | f 714-384-0385
0713WIFISG. No copies authorized. All rights reserved. ©2013 Balboa Water Group.
Helpful Tips
The easiest way to check if you can see your home network
from your tub is to try and connect to it with your smart device next to the tub. Open a browser window and connect to
the Internet (or any other app that connects to the Internet).
Here are some tips that will help you get your bwa™ app
installed and operational so you can…
Control your spa anytime, anywhere, anyplace…
Make sure the Wi-Fi Module was installed properly
While standing at your tub, if you can connect your smart device to the Internet through your home network, then the tub
bwa Wi-Fi module can connect to your home network too.
Power off the tub. The tub must be powered off for the Wi-Fi
module to initialize properly.
If you cannot connect to the Internet through your
home network, you may need to move your router
or add a repeater or some other signal booster so
you can see your network at your tub.
Plug the Wi-Fi module into a spare panel jack within your Control
System. If you do not have a spare panel jack, use the y-adaptor cable (# 25657). Remove the panel connector and replace it with the
y-adaptor. Then plug the panel & Wi-Fi module into the y-adaptor
cable. Power the tub back on.
You can also try moving the Wi-Fi module to a different
spot where you do have coverage in your yard.
Make sure the Wi-Fi Module can connect to your home network
Or hang it on the outside of the tub instead of under the
skirt of the tub.
Before you connect to your home network you must
be able to see your home network from your tub.
Once you can see your home network you are ready.
16
Your Single Source Solution.
We reserve the right to change technical data without further notice.
p 714.384.0384 | f 714-384-0385
0713WIFISG. No copies authorized. All rights reserved. ©2013 Balboa Water Group.
Some other things we have seen and learned during initial setup
and some ways for you to confirm things are working properly:
4. Once you connect the app to the local Wi-Fi network, you should
reconnect your phone to the same network using your phone settings.
You will now be able to control the tub from anywhere that you can
connect to your local / home network.
1. Make sure you have connected the new Wi-Fi module to the tub
with the power off. The Wi-Fi module talks to the spa upon power
up to get the spa configurations. If you did not do this, power down
the spa and then restart it.
Restart the app. You should be communicating to the spa via your
local network. Check to see if all the controls function as they did in
direct connect mode.
2. Upon first startup, the Wi-Fi module is initialized and will show
BWG_SPAXXXX on your Android™ or iPhone® device. Once this
occurs, keep in mind that:
a. This is talking to the tub via direct connect and can reach
about 65 feet or 20 meters.
b. You should now test all the functions of the app in this
mode to determine they are all operational.
If they do you are all set up.
Once connected to the local network, the Wi-Fi module will always
look for that network only.
Now you are ready to test the Internet cloud function. You can do this
1 of 2 ways –
1. Disconnect your device from the local Wi-Fi network that the spa is on.
2. Reconnect to another Wi-Fi hot spot (network like STARBUCKS®)
that has Internet access or via the device’s cellular data connection.
We suggest you check the control functions via this mode 1st
before going on.
Restart the app and connect. Since you are not on the local network,
the app will attempt to connect via the Internet cloud.
If you can control all the functions via this direct connect, you should
now be able to connect the spa to your local home network.
a. If successful, you will see a little cloud and you should be able
to control the spa functions
3. Go to the Settings, Advanced, Wi-Fi settings and connect to
your local home network.
b. Depending on your connection speeds, it may take up to 5
seconds for a function to acknowledge you pressed a device
icon (i.e. If you press the light icon, you should see little spinning dots while the app talks via the Internet to the spa and
the spa sends back a message that it changed the light)
a. Make sure you select the proper password & encryption
(Open, WEP, WPA)
You will now be able to control the tub anywhere you can connect to
the Internet.
b. If you don’t, it looks like the Wi-Fi module connects to the new
network, but since the password is wrong it will not connect
– you will know this because in couple of minutes the BWG_
SPAXXXX will show back up in your Wi-Fi settings
17
Your Single Source Solution.
We reserve the right to change technical data without further notice.
p 714.384.0384 | f 714-384-0385
0713WIFISG. No copies authorized. All rights reserved. ©2013 Balboa Water Group.
Frequently Asked Questions (FAQ)
Q. When I connect via the local home router with one (1) device, then I try to connect with another smart device at the same
time, the next device connects via the cloud. Why?
A. There is only one (1) local router port available for connection. So if you have more than one (1) device trying to connect via the
local router, the others connect via the cloud.
Q. Sometimes when trying to connect to the spa via local home router, I get connected via the cloud instead. Why?
A. This can happen when another device was already connected via the local router and did not disconnect. This seems to happen
more often with Android devices, but it can occur with iOS devices also. You should kill the app on the Android or iOS to make sure it
drops the local connection properly; otherwise the local router connection is taken by the previous running version of the app. This is
just how apps sit in the background in Android devices. For iOS devices, make sure you are out of the app.
Q. I am able to connect to my new wifi module directly (same as the previous version) no problem. I then change the wifi
settings to connect to my home network, no problem. It then instructs me on my iPhone to connect to my home network to
connect to my spa. This is where I am running into trouble. Once I change back to my home network on my iPhone and try to
connect to my spa it keeps telling me “connection failed.” Why?
A. This maybe due to two different things:
1. You may have mistyped your password, SSID or set your encryption wrong. The bwa module tries to connect to the router
using the information you entered. It will keep trying for 3-5 minutes. If after that time it cannot connect, the bwa module will
show up again as networks on your Wi-Fi settings screen. If it does, repeat the process to connect to the router making sure
you type the SSID & password correctly and select the proper encryption (Open, WEP, WPA).
2. You do not have local Wi-Fi coverage or very weak signal from your wireless router at your tub. If you cannot connect to the
internet using iPhone and your local wireless router, the bwa module cannot connect to your home router either. You will need
to add a repeater or network extender to make sure you have local Wi-Fi coverage at your tub.
If you like to read more FAQ please visit. www.balboawater.com/bwa-faq
18
Your Single Source Solution.
We reserve the right to change technical data without further notice.
p 714.384.0384 | f 714-384-0385
0713WIFISG. No copies authorized. All rights reserved. ©2013 Balboa Water Group.
Wireless Troubleshooting Issues
Check the wires and wireless network adapter
Checking that all your wires are plugged in at the router and from the plug is one of the first things you should do – provided of course
that you have access to them. Verify that the power cord is connected and that all the lights of the router and cable/DSL modem are on.
Low Signal Strength
There are a number of factors that can cause the signal of your access point to deteriorate and the performance of your network to fall
under par. Practically any appliance that operates on the same frequency level (2.4 GHz) as 802.11b or 802.11g can cause interference with
your wireless network. Be sure to keep cordless phones, microwaves and other electrical equipment at least 1m away from the access point.
This will ensure you get the best signal from your router.
Installing a repeater for a performance boost
If you’re looking for a boost you can always choose to install a repeater. The job of a repeater is to receive the signal, regenerate it and
rebroadcast it therefore extending the range of your wireless network. This would sit somewhere between your Access Point and your
wireless client.
Positioning the wireless router
You’ll want to put your wireless router somewhere where it will receive the strongest signal with the least amount of interference.
For the best results, follow these tips:
• P
osition your wireless router in a central location. Place the router as close to the center of your home as possible to increase the
strength of the wireless signal throughout your home.
• P
osition the wireless router off of the floor and away from walls and metal objects, such as metal file cabinets. The fewer physical
obstructions between your computer and the router’s signal, the more likely that you’ll be using the router’s full signal strength.
• R
educe interference. 802.11g networking equipment uses a 2.4 gigahertz (GHz) radio frequency. This is the same frequency as most
microwaves and many cordless phones. If you turn on the microwave or get a call on a cordless phone, your wireless signal might be
temporarily interrupted. You can avoid most of these issues by using a cordless phone with a higher frequency, such as 5.8 GHz.
19
Your Single Source Solution.
We reserve the right to change technical data without further notice.
p 714.384.0384 | f 714-384-0385
0713WIFISG. No copies authorized. All rights reserved. ©2013 Balboa Water Group.
Wireless Troubleshooting Issues Continues
Know Your Wireless Security
SSID (Service Set Identifier)
All wireless devices in your network must specify a password or SSID. Our agents strongly recommend a unique, obscure
combination of letters and numbers that you can recall easily.
WEP Security (Wired Equivalent Privacy)
A security protocol for wireless networks designed to provide the same security as a wired network, WEP encrypts data as it’s
transmitted radio waves.
WPA Security (Wireless Protected Access)
A security protocol designed with stronger data encryption and user authentication, WPA is relatively new and more secure than WEP.
Here Are Some Reasons Why You Can’t Get A Signal From Your Router
1. Distance Between the Router and Connection Points
Solutions: The easiest solution would be to move the router to an area where it is unobstructed or move the devices closer to the
router when in use. However, it is also possible to increase the range of Wi-Fi signals with Wi - Fi boosters, Wi - Fi repeaters, or by
upgrading the router antenna.
2. ISP Speed
Solutions: First, determine the speed of the ISP provider. If it’s not very fast, then it may be time to upgrade to a better plan or a
faster router. Also, it may be wise to give the ISP a call to see if any configurations have changed. If the problem is an unreliable ISP,
it may be time to switch companies.
3. Walls and Other Interference
Solutions. Moving the wireless router to a different area can definitely help prevent the signals from being blocked or interfered
with by walls or other devices. Additional signal boosters or repeaters can help extend the Wi-Fi range, but it may be better to look
at different Wi - Fi directional antennas to aim the router directly at devices, windows, thinner walls, or doors to allow the signal to
move through the home unencumbered.
20
Your Single Source Solution.
We reserve the right to change technical data without further notice.
p 714.384.0384 | f 714-384-0385
0713WIFISG. No copies authorized. All rights reserved. ©2013 Balboa Water Group.
Wireless Troubleshooting Issues Continues
4. Number of Devices Online
Solutions: If there are just too many people using the Internet at the same time, an additional Internet connection may be needed.
It’s also possible to limit the number of devices connected to the Internet at the same time. In many cases, there may be outsiders
accessing the router and slowing down speeds. A strong Wi-Fi password should be installed at all times.
5. Outdated Wireless Router
Solutions: Outdated routers simply need to be replaced with newer wireless routers that comply with current Wi-Fi standards.
Damaged routers can be repaired; however, in many cases, buying a new router will save the user time and effort.
21
Your Single Source Solution.
We reserve the right to change technical data without further notice.
p 714.384.0384 | f 714-384-0385
0713WIFISG. No copies authorized. All rights reserved. ©2013 Balboa Water Group.
bwa™ Prior Wi-Fi Module Support
Trademark & Patent Notices
The iOS® app version is backward compatible with prior
Wi-Fi modules and will continue to operate as it has.
The iPhone®, iOS®, iPod® touch and iPad® are a
registered trademarks of Apple Inc.
Prior Wi-Fi modules only support local direct
connections and cannot be linked into a home
network. They only work in the local proximity of
your backyard spa.
The iPhone®, iOS®, iPod® touch and iPad® are a
trademarks of Apple Inc., registered in the U.S. and
other countries.
The Android™ app is not compatible with prior Wi-Fi
modules as it does not support adhoc connections.
bwa™, BALBOA WATER GROUP and the Stylized
Balboa Logo are registered trademarks or applications
applied for in the US Patent & Trademark Office. All
Rights reserved. All other product or service names are
the property of their respective owners
Android is a trademark of Google Inc.
System Requirements
The bwa™ Wi-Fi Module supports all BP systems.
http://www.balboawatergroup.com/bwa
Products are covered under one of more of the following US Patents: 5332944, 5361215, 5550753, 5559720,
5,883,459, 6282370, 6590188, 7030343, 7, 417, 834 B2 &
Canadian Pat 2342614 plus others. Other patents both
foreign and domestic applied for and pending.
22
Your Single Source Solution.
We reserve the right to change technical data without further notice.
p 714.384.0384 | f 714-384-0385
0713WIFISG. No copies authorized. All rights reserved. ©2013 Balboa Water Group.
Regulatory Compliance Information
United States
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Contains FCC ID: W7OMRF24WG0MAMB
• Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
To satisfy FCC RF Exposure requirements for mobile and
base station transmission devices, a separation distance
of 20 cm or more should be maintained between the
antenna of this device and persons during operation.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy, and if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation.
To ensure compliance, operation at closer than this
distance is not recommended. The antenna(s) used for
this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Canada
Contains IC: 7693A-24WG0MAMB
This device complies with Industry Canada license-exempt
RSS standard(s). Operation is subject to the following
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation of this device.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
Le présent appareil est conforme aus CNR d’Industrie
Canada applicablaes aux appareils radio exempts de
licence.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
23
Your Single Source Solution.
We reserve the right to change technical data without further notice.
p 714.384.0384 | f 714-384-0385
0713WIFISG. No copies authorized. All rights reserved. ©2013 Balboa Water Group.
Regulatory Compliance Information
L’exploitation est autorisée aux deux conditions
suivantes: (1) l’appareil ne doit pas produire de brouillage,
et (2) l’utilsateur de l’appareil doit accepter tout brouillage
radioélectrique subi, meme si le brouillage est susceptible
d’en compromettre le fonctionnement.
The product must be disposed of separately in
accordance with the local waste disposal legislation
in force.
Europe
Environmental ratings:
The MRF24WB0MA/MB module conforms to the emission
standards below.
Humidity: Up to 85% non-condensing
Test standards ETSI EN 300 328 V1.7.1 (2006-010)
Storage temp.: -30˚C (-22˚F) to + 85˚C (185 ˚F)
• Maximum Transmit Power
Specifications are subject to change without prior
notification.
Specifications
Operating temp.: -20˚C (-4˚F) to +60˚C (140˚F)
• Maximum EIRP Spectral Density
• Frequency Range
• Transmitter Spurious Emissions
• Receiver Spurious Emissions
The modules are fully compliant with:
• Radiated Emissions EN 55022
• Electrostatic Discharge EN 61000-4-2
• Radiated Immunity EN 61000-4-3
• EN 60950-1
• CE-Mark
• RoHS
24
Your Single Source Solution.
We reserve the right to change technical data without further notice.
p 714.384.0384 | f 714-384-0385
0713WIFISG. No copies authorized. All rights reserved. ©2013 Balboa Water Group.
Intellectual Property Advisement
All Intellectual property, as defined below, owned by or
which is otherwise the property of Balboa Water Group or
its respective suppliers relating to the Balboa Water Group
BP Spa Control Systems, including but not limited to, accessories, parts, or software relating to the “System”, is
proprietary to Balboa Water Group and protected under
federal laws, state laws, and international treaty provisions.
Intellectual Property includes, but is not limited to, inventions (patentable or unpatentable), patents, trade secrets,
copyrights, software, computer programs, and related
documentation, and other works of authorship. You may
not infringe or otherwise violate the rights secured by the
Intellectual Property. Moreover, you agree that you will not
(and will not attempt to) modify, prepare derivative works
of, reverse engineer, decompile, disassemble, or otherwise
attempt to create source code from the software. No title
to or ownership in the Intellectual Property is transferred to
you. All applicable rights of the Intellectual Property shall
remain with Balboa Water Group and its suppliers.
25
Your Single Source Solution.
We reserve the right to change technical data without further notice.
p 714.384.0384 | f 714-384-0385
0713WIFISG. No copies authorized. All rights reserved. ©2013 Balboa Water Group.
Balboa
Water Group World-Wide
BALBOA WATER GROUP
www.balboawater.com
Corporate Office, Tustin, California
Electronic Manufacturing
1382 Bell Avenue
Tustin, California 92780
P 714.384.0384
F 714.384.0385
Valencia, California
Whirlpool Spa and Bath Manufacturing
28545 Livingston Avenue
Valencia, California 91355
P 714.384.0384
F 714.384.0385
Melbourne, Australia
Australian Sales Division
P 1.800 137 879
F 1.800 0703 233
Varde, Denmark
European Sales Division
Roustvej 50
DK-6800 Varde, Denmark
P +45.75.22.46.88
F +45.75.22.52.45
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement