Baumatic BCE520R User manual

Baumatic
Spare parts list for Baumatic model BCE520R
Position Prefix
1.-10
1.-15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
Supplier
Item code
MODEL
NUMBER
XTRM
86686
BCE520R
XTRM
86687
BCE520R
XTRM
33641-BL
BCE520R
XTRM
31816
BCE520R
XTRM
91254
BCE520R
XTRM
40791
BCE520R
XTRM
31958
BCE520R
XTRM
62678-BL
BCE520R
XTRM
62677-BL
BCE520R
XTRM
30566
BCE520R
XTRM
32822
BCE520R
XTRM
62618-BL
BCE520R
XTRM
91255
BCE520R
XTRM
40532
BCE520R
XTRM
62680-BL
BCE520R
XTRM
62679-BL
BCE520R
XTRM
33747-1
BCE520R
XTRM
33917-BLW
BCE520R
XTRM
33918-BL
BCE520R
XTRM
40595
BCE520R
XTRM
32130-BL
BCE520R
XTRM
40105
BCE520R
XTRM 60331-BCE520R BCE520R
XTRM
60718-1
BCE520R
XTRM
60271-EBL
BCE520R
XTRM
32852
BCE520R
XTRM
40796
BCE520R
XTRM
40067
BCE520R
XTRM
40174
BCE520R
XTRM
40841
BCE520R
XTRM
63009
BCE520R
XTRM
40237
BCE520R
XTRM
63008
BCE520R
XTRM
40241
BCE520R
XTRM
62908
BCE520R
XTRM
33973
BCE520R
XTRM
34091
BCE520R
XTRM
30838-G
BCE520R
XTRM
63661-EBL
BCE520R
XTRM
40415-G
BCE520R
XTRM
62922
BCE520R
XTRM
61147
BCE520R
XTRM
51408-EBL
BCE520R
XTRM
31566
BCE520R
XTRM
31516
BCE520R
Description UK
Main Door Complete
Small Door panel complete
Handle
Plastic insert
Main Door Front glass complete
Large hinge
Hinge plastic
Big hinge bottom profile right sheet
Big hinge upper profile right sheet
Inner glass under seal
Big door inner glass
Glass door upper strip profile sheet
Small Door Front glass complete
Small hinge
Small hinge upper profile left sheet
Small hinge upper profile right sheet
Small cover inner glass
Knob part
Knob
Knob spring
Digital timer button
Digital timer
Control panel
Inner control panel
Heat Shield
Inner panel baga
Switch with termostat
Thermostat
Hot - plate switch
Thermostat
Hot - plate connecting sheet
Hot-plate 1000W 145
Hot - plate connecting sheet
Hot-plate 1500W 180
Bridge connection sheet iron inner front panel
Upper plate connection plastic
Upper plate support plastic
Upper plate rear connection plastic
Upper plate sheet
Chain
Switch defence sheet
heating element connecting steel
Small inner cavity complete
Small cavity seal
Big cavity seal
Currency Price
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
14.09
9.66
2.29
0.10
5.19
0.88
0.03
0.80
0.80
0.03
1.53
0.24
2.62
1.01
0.35
0.35
0.84
0.05
0.18
0.10
0.10
8.72
1.21
0.27
0.45
0.01
1.77
2.58
1.33
2.58
0.07
3.77
0.10
5.16
0.05
0.06
0.01
0.01
2.34
0.05
1.56
0.01
5.33
0.41
0.60
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63, 64, 65
66
67
68
69
70
71
72
73
74
75
76
77
78
XTRM
XTRM
XTRM
XTRM
XTRM
XTRM
XTRM
XTRM
XTRM
XTRM
XTRM
XTRM
XTRM
XTRM
XTRM
XTRM
XTRM
XTRM
XTRM
XTRM
XTRM
XTRM
XTRM
XTRM
XTRM
XTRM
XTRM
XTRM
XTRM
XTRM
XTRM
XTRM
XTRM
51316-EBL
40553
30924
31562-1
62418-BL
62419-BL
61592
61707
62305-RED
31567
51502-BL
51552-BL
61725
40179
51705-BL
51704-BL
34382
31561-1
32622
40874
63755-EBL
31506
31507-1
30495
40828
30099
31766
33105
21001
32947
32948
33099
33101
BCE520R
BCE520R
BCE520R
BCE520R
BCE520R
BCE520R
BCE520R
BCE520R
BCE520R
BCE520R
BCE520R
BCE520R
BCE520R
BCE520R
BCE520R
BCE520R
BCE520R
BCE520R
BCE520R
BCE520R
BCE520R
BCE520R
BCE520R
BCE520R
BCE520R
BCE520R
BCE520R
BCE520R
BCE520R
BCE520R
BCE520R
BCE520R
BCE520R
Complete big inner cavity
Hinge connector
Indoor lamp
Ventilation tube
Decoration sheet (RH, double)
Decoration sheet (LH, double)
Chassie side support sheet iron
Complete frame bottom base sheet
Plinth sheet
Plastic Foot
Complete front frame
Complete rear frame
Outer body rear sheet
Klemens box
Outer body left sheet
Outer body right sheet
Heating element (top grill)
Top heating element
Bottom heating element
Isolation material
Tray
Wire grill
Wire shelf
Tray holder - wire
Limit termostad
Cable string
Cable set
Inner cable set
Chain set
Polystyrene right
Polystyrene left
Packing box
Packing bottom cardboard
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
7.00
0.11
1.17
1.50
0.31
0.31
0.56
2.11
0.43
0.10
1.61
2.13
1.68
1.13
3.13
3.13
3.46
2.27
2.72
3.72
1.23
1.05
1.35
0.69
0.60
0.01
3.95
5.63
0.59
2.13
2.13
2.52
0.32
BCE520SL/BL/IV/R/W
50 cm Twin cavity
electric slot-in cooker
y
1
User Manual for your Baumatic
BCE520SL/BL/IV/R/W
50 cm Twin cavity electric slot-in
cooker
NOTE: This User Instruction Manual contains important
information, including safety & installation points, which will
enable you to get the most out of your appliance. Please keep it
in a safe place so that it is easily available for future reference; for
you or any person not familiar with the operation of the appliance.
GS 06/07/12
2
Contents
Environmental note
4
Important safety information
5–8
Specifications
Dimensions
Product specifications
Standard accessories
Electrical details
Description of the appliance
Control panel
Oven timer
9 – 13
9
9
10
10
11
12
12 - 13
Setting and using the oven timer
Setting the time of day
Setting the minute minder function
13
13
13
Selecting a cooking function and temperature
Before first use
Using the main oven
Using the grill
Power on indicators
Cooking guidelines
Warnings
14 – 17
14
15
15 - 16
16
16
17
Using the hob top
Before first use
Using the hob top zones
Hob guidelines
17 - 19
17
18
18 - 19
Cleaning and maintenance
Cleaning the hob top
After each use
Maintaining the solid plates
Replacing the oven bulb
Removing the oven door for cleaning
19 - 22
20
20
20 - 21
21
22
Installation
Positioning
Safety chain anchors
Securing the safety chains
Electrical connection
Connecting the main supply cable
23 - 28
23 - 25
25
26
27
27 - 28
My appliance isn’t working correctly
28 – 30
Baumatic consumables
31
Contact details
32
3
Environmental note
o The packaging materials that Baumatic uses are environmentally
friendly and can be recycled.
o Please discard all packaging material with due regard for the
environment.
4
Important safety information
Your safety is of the utmost importance to Baumatic.
Please make sure that you read this instruction booklet
before attempting to install or use the appliance. If you
are unsure of any of the information contained in this
booklet, please contact the Baumatic Advice Line.
General Information
o This appliance is designed for domestic household use and for
the cooking of domestic foodstuffs.
o IMPORTANT: The adjacent furniture and all materials used in
the installation must be able to withstand a minimum
temperature of 85°C above the ambient temperature of the
room it is located in, whilst in use.
o Certain types of vinyl or laminate kitchen furniture are
particularly prone to heat damage or discolouration at
temperatures below the guidelines given above.
o IMPORTANT: Baumatic Ltd. DO NOT recommend that this
appliance is installed on any type of marine vessel.
o The use of this appliance for any other purpose or in any other
environment without the express agreement of Baumatic Ltd.
will invalidate any warranty or liability claim.
o Your new appliance is guaranteed against electrical or
mechanical defects, subject to certain exclusions that are noted
in Baumatic’s Conditions Of Guarantee. The foregoing does not
affect your statutory rights.
o Repairs may only be carried out by Baumatic service
engineers or their authorised service agents.
Warning and safety instructions
o This appliance complies with all current European safety
legislation. Baumatic do wish to emphasise that this compliance
does not remove the fact that the appliance surfaces will
become hot during use and retain heat after operation.
5
Child Safety
o Baumatic strongly recommend that babies and young children
are prevented from being near to the appliance and not allowed
to touch the appliance at any time. During and after use, all
surfaces will become hot.
o If it is necessary for younger family members to be in the
kitchen, please ensure that they are kept under close supervision
at all times.
General Safety
o Make sure that you understand the controls before using the
appliance.
o Check that all of the controls on the appliance are turned off
after use.
o Always stand back when opening the oven door, this will allow
heat to disperse.
o Take care when removing items from the oven, as the contents
may be hot.
o Always keep the oven doors closed when the oven is not in use.
o Always follow the basic principles of food handling and hygiene;
this will prevent the possibility of bacterial growth.
o Always keep ventilation slots clear of obstructions.
o Keep fingers away from the hinge areas when closing the door,
otherwise you may trap them.
o Oven gloves should be used when placing food in the oven cavity
and when removing it. Care should be taken to avoid direct
contact with any of the elements in the appliance.
o DO NOT LEAVE THE APPLIANCE UNATTENDED WHILST IN
USE.
o Do not place heavy objects on the oven door or lean on the
oven door when it is open, as this can cause damage to the oven
door hinges. Nobody should be allowed to sit or stand on any
part of the cooker.
6
o Do not store chemicals, food stuffs, pressurised containers in or
on the cooker or in cabinets immediately above or next to the
cooker.
o Do not heat up unopened food containers, as pressure can build
up which may cause the container to burst.
o Do not place flammable or plastic items on or near the hob
burners, these types of materials should also not be placed in
the oven or the compartment below the oven.
o Do not leave heated oil or fat unattended, as this is a fire risk.
You should not fill a deep fat frying pan more than one third full
of fat or oil; you should also not use a lid.
o Do not allow fat or oil to build up in the oven trays, grill pan or
oven base.
o Do not place pans or baking trays directly on the base of the
oven cavity, or line it with aluminium foil.
o Do not grill food containing fat without using the grill trivet. The
grill trivet should never be covered with aluminium foil.
o Do not place hot enamel parts in water, leave them to cool first.
o Do not allow vinegar, coffee, milk, saltwater, lemon, tomato
juice or any liquid with high sugar content to remain in contact
with the enamel parts of the appliance. Spillages should be
wiped up immediately.
o Do not allow electrical fittings or cables to come into contact
with areas on the appliance that get hot.
o Do not use the appliance to heat the room it is located in or to
dry clothing. No clothing should be placed over or near to the
hob burners or oven door.
o Do not install the appliance next to curtains or soft furnishings.
o Do not attempt to lift or move cooking appliances by using the
oven door or handle, as this may cause damage to the appliance
or result in injury to the person lifting the appliance.
7
Cleaning
o Cleaning of the oven should be carried out on a regular basis.
o Great care should be taken whilst using this appliance and when
following the cleaning procedure.
o IMPORTANT: The appliance must be disconnected from the
mains before following the cleaning procedure.
Installation
This appliance must be correctly installed by a
suitably qualified person, strictly in accordance
with the manufacturer’s instructions. Please see
the specific section of this booklet that refers to
installation.
o Baumatic Ltd. declines any responsibility for injury or
damage, to person or property, as a result of improper
use or installation of this appliance.
o Heat, steam and moisture will be created during use of the
appliance, take care to avoid injury and ensure that the room is
adequately ventilated. If the appliance is going to be used for
prolonged periods of time, then additional ventilation may be
required.
o Please consult with your qualified installer if you are in any doubt
about the amount of ventilation that you will require.
Declaration of conformity
This appliance complies with the following European Directives:
-73/23/EEC
regarding “low voltage”
-89/336/EEC regarding “electromagnetic disturbances”
-89/109/EEC regarding “materials in contact with food”.
o The above directives comply with 93/68/EEC regarding CE
marking.
o The manufacturer declares that the oven is built using certified
materials and requires the appliance to be installed in
accordance with the standards currently in force. This appliance
must be used by a trained person for domestic purposes only.
8
Specifications
Product dimensions:
Height:
Width:
Depth:
900 - 920 mm
500 mm
600 mm
Product specifications:
o 4 solid hot plates:
o 2 x 1.50 kW standard plates (Ø 180 mm)
o 2 x 1.00 kW standard plates (Ø 145 mm)
o
o
o
o
Energy efficiency class: A/A
LED minute minder
Double-glazed removable doors
Adjustable feet
Top oven: Grill
o 1 function
o Oven net / gross capacity: 22 / 26 litres
Main oven: Conventional oven
o 1 function
o Oven net / gross capacity: 48 / 55 litres
9
Standard accessories:
o 2 x Enamelled baking trays with handle
o 1 x Shelf
o 1 x Trivet
Electrical details
Rated Voltage:
Supply Connection:
Max Rated Inputs:
Mains Supply Lead:
Oven Light Bulb:
220 - 240 Vac 50 Hz
30A (double pole switched fused
outlet with 3mm contact gap)
8.50 kW
3 core x 6 mm² (not supplied)
E14 15 W/300°C screw type pygmy
For future reference please record the following information which can
be found on the rating plate and the date of purchase which can be
found on your sales invoice. The main rating plate for your oven can
be located at the back of the cooker. A smaller rating plate which
quotes the serial and model numbers can be found on the inner cavity
of the oven or grill door.
Model Number
……………………………….
Serial Number
……………………………….
Date of Purchase
……………………………….
10
Description of the appliance
1) Control panel
2) Top oven
3) Oven door
4) 1.00 kW standard plate (Ø 145 mm)
5) 1.50 kW standard plate (Ø 180 mm)
6) 1.50 kW standard plate (Ø 180 mm)
7) 1.00 kW standard plate (Ø 145 mm)
8) Temperature light
9) Grill pan with removable handle
10) Main oven
11) Shelf and drip tray
11
Control Panel
Thermostat control knob (main oven)
o Use this control knob to
control the temperature in
the oven.
Thermostat control knob (top oven)
o Use this control knob to
select the temperature for
the grill in the top oven.
Oven timer
1) Alarm stop icon (press minus button to stop alarm).
2) Timer minus button.
12
3) Timer plus button.
4) Time-setting mode indicator (press plus and minus buttons
together to enter this mode).
Setting and using the oven timer
Setting the time of day
Before using the oven for the first time you should set the time
of day.
o Press the plus (3) and minus (2) buttons simultaneously to
enter the time-setting mode. The display will automatically show
“12.00”.
o Use the plus (3) and minus (2) buttons to adjust the time to the
correct hour. Release all buttons and after a few seconds the
time will be set.
Setting the minute minder function (both ovens)
You are able to set the minute minder at any time, regardless of
whether an oven function has been selected. You can set a period of
time using the minute minder function and an alarm will sound when
this period of time has elapsed.
o Press the plus button (3) to enter the alarm setting mode. Set
the period of time that you wish the minute minder to
countdown for by using the minus (2) and plus (3) buttons.
o Once the display has got to your desired countdown time, let go
of the minus and plus buttons. After five seconds the countdown
will begin.
o An alarm will sound when the countdown time has elapsed. The
alarm can be silenced by pressing the minus button (2).
o Important: The oven will continue to heat once the alarm has
been silenced. If you have finished cooking, then you should turn
the oven function selector and thermostat control knob to 0.
13
Selecting a cooking function and temperature
After your appliance is connected to your mains supply for the first
time, the numbers on the timer display will flash. Before you select a
cooking function you should set the time of day (see previous section
for how to do this).
Before first use
o To remove any residue from the oven that may have been left
from the manufacturing process, you should select the
conventional oven or grill function and turn the thermostat dial
to its maximum temperature setting.
o It is perfectly normal for a smell to be produced during this
process.
o You should make sure that any windows in the room are left
open during this process.
o It is advisable for you not to remain in the room whilst the
burning off process is taking place.
o You should leave each oven on maximum setting for 30 – 40
minutes.
o IMPORTANT: You
simultaneously.
should
not
burn
off
both
ovens
o After both cavities have cooled, they should then be cleaned with
warm soapy water, using either a sponge or soft cloth. No
abrasive cleaners should be used.
o Outer parts of the oven should be cleaned with warm soapy
water, using either a sponge or soft cloth. No abrasive cleaners
should be used.
14
Using the main oven
o The
oven
temperature
control knob should be
turned clockwise and used
to select a temperature for
the conventional oven.
o
The indicator
control panel
when
the
temperature
reached inside
light on the
will go out
selected
has
been
the oven.
There is one cooking function available in the main oven:
CONVENTIONAL OVEN (main oven only): This method of
cooking provides traditional cooking, with heat from the top
and lower elements. This function is suitable for roasting and
baking on one shelf only.
Using the grill
The grill control knob should be
turned clockwise and used to
select the grill temperature that
you require. We recommend
that you preheat the grill for
five minutes before putting food
into the grill.
IMPORTANT: The grill door
must be closed when using the
grill function.
FULL GRILL (top oven only): This method of cooking
utilises the inner and outer parts of the top element, which
directs heat downwards onto the food. This function is
suitable for grilling medium or large portions of sausages,
bacon, steaks, fish etc… Ideally the thermostat control knob should be
set to 200°C.
15
IMPORTANT: You should ensure that the
handle for the enamelled baking tray is
connected correctly when using it.
Power on indicators
The power light will come on to indicate that the appliance is in
operation. The temperature light will switch off when the temperature
set on the thermostat control knob has been reached. It will cycle on
and off throughout the cooking time.
You should not place food inside the cavity, until the correct
cooking temperature has been reached.
Cooking guidelines
o Please refer to the information given on food packaging for
guidance on cooking temperatures and times. Once familiar with
the performance of your appliance, temperatures and times can
be varied to suit personal preference.
o For the main oven you should follow the information given on
food packaging for a conventional oven.
o Make sure that frozen foods are thoroughly thawed before
cooking, unless the instructions on the food packaging advise
that you can “cook from frozen”.
o You should pre-heat the oven and not place food inside of it until
the oven is properly heated.
o Before cooking, check that any unused accessories are removed
from the oven.
o Place cooking trays in the centre of the oven and leave gaps
between the trays to allow air to circulate.
o Try to open the door as little as possible to view the dishes.
o The oven light will remain on during cooking.
16
Warnings
o Keep the oven door closed when using either the grill or oven
function.
o Do not use aluminium foil to cover the enamelled baking tray or
heat items wrapped in aluminium foil under the grill. The high
reflectivity of the foil could potentially damage the grill element.
o You should never line the base of your oven with aluminium foil.
o During cooking, never place pans or cookware directly onto the
bottom of the oven. They should always be placed on the shelf
provided.
o The grill heating element becomes extremely hot during
operation, avoid touching it inadvertently when handling the
food which you are grilling.
o IMPORTANT: Be careful when opening the door, to avoid
contact with hot parts and steam.
o IMPORTANT: In case of fire, switch off the electricity supply to
the appliance. NEVER pour water onto burning oil.
o IMPORTANT: You should always grill with the top oven
door closed.
Using the hob top
Before first use
IMPORTANT: You should clean the hob surface (see
“Cleaning and maintenance” section).
o You should switch on one cooking zone at a time, for 5 minutes
at the maximum setting. This will help to eliminate any new
smell that exists and evaporate any humidity that has formed on
the heating elements during transit.
o Do not burn off more than one zone at once.
o You must place a saucepan filled half full with cold water on
each zone as you burn it off.
17
Using the hob top zones
o Each zone on the ceramic hob top is controlled by a control
knob.
o To activate a zone, position the
control knob between 1 – 6.
o You should select a control knob
position that is suitable for the
particular cooking that you are
carrying out. 6 is the highest
temperature setting and 0 is off.
o When you have finished cooking on a particular zone, it is
important to make sure that the control knob is turned back to 0
(the off position).
Hob guidelines
o The first few times the hob top is used, it may give off an acrid,
burning smell. This smell will disappear completely with repeated
use.
o The hob top is fitted with cooking areas of different diameter and
power.
o The saucepans must be positioned exactly on the zones for
efficient heating to occur. Pans should have the same diameter
as the cooking zone that they are being used on.
o You should not use saucepans with rough bottoms, as this can
scratch the surface.
o Before use, make sure that the bottoms of the saucepans are
clean and dry.
o When cold, the bottom of the pans should be slightly concave, as
they expand when hot and lie flat on the surface of the hob. This
will allow the heat to transfer more easily.
o The best thickness for the bottom of the pans is 2 – 3 mm of
enameled steel and 4 – 6 mm for stainless steel with sandwich
type bottoms.
18
o If these rules are not followed, then there will be a great loss of
heat and energy. Heat not absorbed by the saucepan, will spread
to the hob, frame and surrounding cabinets.
o Preferably cover pans with a lid to permit cooking at a lower
heat.
o Always cook vegetables and potatoes, etc. in as little water as
possible to reduce cooking times.
o For a faster heat up of a zone, you can turn the control knob to
6. Then when the contents of the saucepan are boiling, you may
turn the control knob to a lower setting.
o Food or liquid that has a high sugar content may damage the
hob top if it comes into contact with the hob surface. Any
spillages should be wiped up immediately, however this may not
prevent the hob surface from becoming damaged.
o IMPORTANT: The hob surface is tough; however it is not
unbreakable and can be damaged. Especially if pointed or hard
objects are allowed to fall on it with some force.
o DO NOT USE THE HOB IF THE SURFACE BECOMES BROKEN
OR CRACKED. YOU SHOULD CONTACT THE BAUMATIC
SERVICE DEPARTMENT IMMEDIATELY.
Cleaning and maintenance
Cleaning operations must only be carried out
when the oven is cool.
The appliance should be disconnected from your
mains supply before commencing any cleaning
process.
o The oven should be thoroughly cleaned before it is operated for
the first time and after each use. This will avoid residual food
stuffs becoming baked on the oven cavity. After residues have
been baked on several times, they are far more difficult to
remove.
o Never clean the oven surfaces by steam cleaning.
o The oven cavity should only be cleaned with warm soapy water,
using either a sponge or soft cloth. No abrasive cleaners should
be used.
19
o Any stains that may appear on the bottom of the oven will have
originated from food splashes or spilt food, these splashes occur
during the cooking process. These could possibly be a result of
the food being cooked at an excessively high temperature or
being placed in cookware that is too small.
o You should select a cooking temperature that is appropriate for
the food that you are cooking. You should also ensure that the
food is placed in an adequately sized dish and that you use the
enamelled baking tray where appropriate.
o Outer parts of the oven should only be cleaned with warm soapy
water, using either a sponge or soft cloth. No abrasive cleaners
should be used.
o If you use any form of oven cleaner on your appliance, then you
must check with the manufacturer of the cleaner that it is
suitable for use on your appliance.
o Any damage that is caused to the appliance by a cleaning
product will not be fixed by Baumatic free of charge, even
if the appliance is within the guarantee period.
Cleaning the hob top
Any residues that are left on the hob top surface from cleaning
agents will damage it. You should remove any residues with
water and a little washing up liquid.
Abrasive cleaners or sharp objects will damage the hob surface;
you should clean it using water and a little washing up liquid.
Although it is easier to clean some deposits whilst the hob
surface is still warm. You should take care not to burn yourself if
cleaning the hob surface when it is still warm.
After each use
o Wipe the appliance over with a damp cloth and a little washing
up liquid.
o Dry the appliance by rubbing the surface with a clean cloth.
Maintaining the solid plates
o If something is spilt onto the plate itself, then it can be removed
using a soft brush, plastic or nylon scourer and warm water.
20
o To keep the solid plates in good condition, you should put a little
olive oil onto a kitchen towel and rub it onto the surface of the
plate. The next time the plate is used, it may produce a little
smoke.
o Alternatively, you can use a hotplate conditioner; these products
can normally be found at larger supermarkets and hardware
stores. The manufacturer’s instructions should be followed when
using these products.
o IMPORTANT: If the solid plates are not maintained regularly
with olive oil or a hotplate conditioner, then they may rust.
Replacing the oven bulb
IMPORTANT: The oven must be disconnected from
your mains supply before you attempt to either
remove or replace the oven bulb.
o Remove all oven shelves and the drip tray.
o Unscrew the bulb cover.
o Unscrew the bulb and remove it from its holder.
o Replace the bulb with a 15 W/300°C, screw type pygmy.
o Do not use any other type of bulb.
o Screw the bulb cover back into its original position.
21
Removing the oven door for cleaning
To facilitate the cleaning of the inside of the cooker and the outer
frame of the oven, the door can be removed as follows:o The hinges (A) have two movable bolts on them (B).
o If you raise both of the movable bolts (B), then the hinges (A)
are released from the oven housing.
o You should grip the sides of the door at the centre and then
incline it slightly towards the cooker cavity and then pull it gently
away from the cooker cavity.
o IMPORTANT: You should make sure that the door is supported
at all times and that you place the door on some padded
material whilst cleaning it.
o The oven door and door glass should only be cleaned using a
damp cloth and a small amount of detergent. The cloth MUST
NOT have come into contact with any form of cleaning product
or chemical previously.
o To refit the door you should slide the hinges back into their slots
and open the door fully.
o IMPORTANT: The movable bolts (B) must be closed back into
their original positions before closing the door.
o Take care not to dislodge the hinge
locking system when removing the door,
as the hinge mechanism has a strong
spring.
o Do not immerse the door in water at any
time.
22
Installation
The installation must be carried out by a suitably
qualified person, in accordance with the current
version of the following.
o UK Regulations and Safety Standards or their European
Norm Replacements.
o Building Regulations (issued by the Department of the
Environment).
o Building Standards (issued by the Scottish Development
Department).
o IEE Wiring Regulations.
o Electricity At Work Regulations.
o Gas
Safety
(Installation
and
Use)
(Amendment)
Regulations.
Positioning
The adjacent furniture and all materials used in the
installation must be able to withstand a minimum
temperature
of
85°C
above
the
ambient
temperature of the room it is located in, whilst in
use.
o Your appliance is heavy, so you should be careful when moving
or positioning it.
o Do not try to move the cooker by pulling on either the door,
handle or control panel.
23
o The cooker is designed to slot in between 600 mm deep
cabinets, which are spaced approximately 500 mm apart.
o It can also be used as a freestanding unit, with a cabinet to one
side, in a corner setting or with its back to a wall.
o IMPORTANT: It should not be installed at the end of a run of
cabinets, if there is a cabinet at immediate right angles to the
cooker door.
o The wall behind the cooker and 450 mm above and across the
width of the cooker should be of an incombustible material and
preferably an easy clean surface, such as ceramic tiles.
o Any overhanging surface or cooker hood should be at least 700
mm above the highest point on the hob top (including the
burners).
o Baumatic do not recommend that the cooker is positioned below
wall cupboards, as the heat and steam from the appliance and
what is being cooked, may damage the cupboard and its
contents.
o The cooker may be located in a kitchen, or a bedroom, but not in
a room containing a bath or shower. The cooker must not be
installed in a bedroom of less than 20m³ in size.
24
o The cooker is fitted with four feet
that can be adjusted to match
the height of your kitchen
cabinets.
o If the cooker is not level or is
unstable due to an uneven floor
surface, use the adjustable feet
to alter each corner until the
cooker is level.
Safety chain anchors
o In order to eliminate the risk of the oven falling forward, two
chains have been installed at the rear of the cooker. Before
use, these will need to be fastened securely to the wall behind
the appliance with the anchor brackets supplied.
o Decide on a suitable wall location for fitting the anchor
brackets directly behind each cooker safety chain.
o Hold the chain anchor up to the wall where it will be required
and mark the fixing holes.
o Drill the fixing holes and fix the chain anchors to the wall
using the screws provided and suitable wall plugs for the type
of wall being fixed to.
o Leave the chains unattached until the installation process has
been completed.
25
Securing the safety chains
o Before securing the safety chains, check that you have
completed the installation process and that all connections have
been made successfully and that the cooker is in its final
operating position.
o To fix the security chains to their anchor brackets: Loosen
the hex nut at the unattached end of the safety chain, until it is
flush with the screw end. Do not remove it completely.
o Insert the screw head into the top hole of the anchor bracket by
tilting it sideways so that it is at an angle to the top hole when it
is inserted.
o When the screw head is fully engaged in the bracket, tilt it
upwards so that it is straight, and tighten the hex nut to secure
the end chain link into position.
26
Electrical connection
This appliance must be installed by a qualified
person in accordance with the latest edition of the
I.E.E. Regulations and in compliance with Baumatic’s
instructions.
Before connecting the appliance, make sure that the supply voltage
marked on the rating plate corresponds with your mains supply
voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
o This appliance must be wired into a 30 A double pole switched
fused spur outlet, having 3 mm contact separation and placed in
an easily accessible position adjacent to the appliance. It should
not be located above the appliance and no more than 1.25m
away from it.
o The spur outlet must still be accessible even when your oven is
located in its operating position.
o Cable type: H05 RRF 3 core x 6 mm²
Connecting the mains supply cable
IMPORTANT
The wires in the mains lead are coloured in accordance with the
following code:
GREEN AND YELLOW
BLUE
BROWN
EARTH
NEUTRAL
LIVE
27
o Release the cover plate by removing the cover screw.
o Loosen the cable clamp.
o Feed the mains connection cable through the grommet in the
back panel and cable clamp. Connect the mains supply cable to
the terminal block on the cooker using the colour code on the
previous page.
o Secure the cable clamp. Check the cable terminals for tightness
and ensure that the terminal links are in place, then replace the
cover plate and cover screw.
My appliance isn’t working correctly
o The oven isn’t coming on.
* Check that the oven is connected to the power supply properly.
* Check that you have selected a cooking function and a cooking
temperature.
o There appears to be no power to the oven and grill.
* Check that the appliance has been connected to the electrical
mains supply correctly.
* Check that the mains fuses are in working order.
* Check that the operating instructions for setting the time of day
have been followed.
o The grill function works but the main oven does not.
* Check that you have used the correct control knob to switch on
the oven.
o The grill and top oven element is not working, or cuts out
for long periods of time during use.
* Allow the oven to cool for approximately 2 hours. Once cool,
check whether the appliance is again working properly.
28
o My food is not cooking properly
* Ensure that you are selecting the correct temperature and the
correct cooking function for the food that you are cooking. It
may be appropriate to adjust your cooking temperature by plus
or minus 10°C, to achieve the best cooking results.
o My food is not cooking evenly
* Check that the oven has been installed correctly and is level.
* Check that the correct temperatures and shelf positions are
being used.
o The oven light is not working
* Refer the “Replacing the oven bulb” section.
o I am getting condensation in my oven
* Steam and condensation is a natural by product of cooking any
food with high water content, such as frozen food, chicken etc.
* You may get condensation in the oven cavity and forming
between the oven door glasses. This is not necessarily a sign
that the oven is not working correctly.
* Do not leave food in the oven to cool after it has been cooked
and the oven has been switched off.
* Use a covered container, where practical, when cooking to
reduce the amount of condensation that forms.
29
IMPORTANT: If your appliance appears not to be
operating correctly, then you should disconnect it
from your mains supply and then contact the
Baumatic
Customer
Care
Department
on
telephone number (0118) 933 6911.
DO NOT ATTEMPT TO REPAIR THE APPLIANCE
YOURSELF.
Please note that if an engineer is asked to attend whilst the product is
under guarantee and finds that the problem is not the result of an
appliance fault, then you may be liable for the cost of the call out
charge.
The appliance must be accessible for the engineer to perform
any necessary repair. If your appliance is installed in such a
way that an engineer is concerned that damage will be caused
to the appliance or your kitchen, then he will not complete a
repair.
This includes situations where appliances have been tiled in,
sealed in with sealant, have wooden obstructions placed in
front of the appliance, like plinths. Or any installation other
than the one specified by Baumatic Ltd. has been completed.
Please refer to the conditions of guarantee that appear on the
warranty card that you receive with the appliance.
IMPORTANT: Baumatic Ltd. operates a policy of continuous
improvement and reserves the right to adjust and modify its
products without prior notification.
30
Baumatic consumables
o BC001 Degreaser for Dishwashers (200g)
o BC002 Descaler for Washing Machines and Dishwashers (200g)
o BC003 Ceramic Hob Cleaner (250ml)
o BC004 Oven Cleaner (250ml)
o BC005 Stainless Steel Cleaner and Protector (250ml)
o BC007 E-Cloth – General Purpose Cloth
o BC008 Microwave Cover
To order a Baumatic consumable product please call 0123 5437 244
and quote the product code. You can also order online from
eshop.baumatic.co.uk
31
United Kingdom
Baumatic Ltd
Baumatic Buildings,
6 Bennet Road,
Reading, Berkshire
RG2 0QX
United Kingdom
Czech Republic
Baumatic CR spol s.r.o.
Lípovà 665
460 01 Liberec 4
Czech Republic
+420 483 577 200
www.baumatic.cz
Sales Telephone
(0118) 933 6900
Sales Fax
(0118) 931 0035
Customer Care Telephone
(0118) 933 6911
Customer Care Fax
(0118) 986 9124
Spares Telephone
(01235) 437244
Advice Line Telephone
(0118) 933 6933
Slovakia
Baumatic Slovakia, s.r.o.
Panenská 34
811 03 Bratislava - Staré Mesto
Slovakia
+421 255 640 618
www.baumatic.sk
Germany
Baumatic Gmbh
Lilienthalstrasse 1
320 52 Herford
Deutschland
E-mail:
sales@baumatic.co.uk
customercare@baumatic.co.uk
spares@baumatic.co.uk
technical@baumatic.co.uk
+49 5221 694 99-0
www.baumatic.de
Website:
www.baumatic.co.uk
Italy
Baumatic Italia S.R.L.
Via Galvani N.3
35011 Campodarsego (PD)
Republic of Ireland
Service Telephone
1-890 812 724
+3904 9920 2297
www.baumatic.it
Spares Telephone
091 756 771
Holland
Baumatic Benelux B.V.
Grindzuigerstraat 22
1333 MS ALMERE
Nederland
+3136 549 1555
www.baumatic.nl
32
33
34
35
36