Miles Industries | H4 | 650 H4 Direct Vent Zero Clearance Dimensions & Framing

650 H4 Direct Vent
Zero Clearance
Dimensions & Framing
January 10
1/1
46” (1168 mm) min.
Stand-off
65
3” (76 mm) min.
To side wall from
inner frame
in front of
the appliance
MINIMUM
3/4” (19 mm)
from finished
wall surface
to front of
appliance
”(
16
51
)m
m
m
See table
36”
(914 mm)
min.
A
.
in
32-3/16” (817 mm)
Mantel
Stand-off
Min. 36”
(914 mm)
from
combustible
materials
16”
(406 mm)
NOTE: Backing plate requires a MINIMUM of 1/2” (13 mm) space
to floor/hearth in front for air flow. Raise the appliance accordingly.
Mantel depth “A”
0–2”
(0–51 mm)
2–4”
(51–102 mm)
4–6”
(102–152 mm)
6–8”
(152–203 mm)
8–10”
(203–254 mm)
10–12”
(254–305 mm)
Mantel height “B”
31-1/4”
(794 mm)
34”
(864 mm)
35”
(889 mm)
36”
(914 mm)
37”
(940 mm)
38”
(965 mm)
38-3/4” (984 mm) to underside of
header and cavity height
30-3/4” (768 mm)
to wall finish
m)
MINIMUM 1/2” (13 mm) space
between bottom of backing
plate and surface of hearth or
floor finish in front for air flow
8m
3
” (8
33
16” (406 mm) min. straight out
or off the top venting.
Allow for elbow if rear vent with rise.
FRAMING DIMENSIONS
www.cozycomfortplus.com
416-780-9760
Miles Industries Ltd. • 190—2255 Dollarton Highway • North Vancouver, BC • V7H 3B1
Tel: 604.984.3496 or 1.800.468.2567 • Fax: 604.984.0246 or 1.800.268.0333
www.valorfireplaces.com
416-780-9760
Combustible framing
allowed beneath fireplace.
When the appliance is
installed directly on
carpeting, tile or other
combustible material
other than wood
flooring, the appliance
shall be installed on a
metal or wood panel
extending the
full width and recessed
depth of the appliance
www.cozycomfortplus.com
Wall Finish
38-5/8” (981 mm)
B
23-1/8” (587 mm)
to rear vent center
See
table
26-3/4” (679 mm)
Stand-off
29-3/4” (756 mm)
30-3/4” (781 mm)
46” (1168 mm) min.
16” (406 mm)
8-1/4” (210 mm)
From finished
wall surface
to top vent
Download PDF