Magnavox FW 560C Instruction manual

Contents
Introduction ..................................... 2
7.1ch Home Theater System
HT-S5100
AV Receiver (HT-R560)
Speaker Package (HTP-560)
Front Speakers (SKF-560F L/R)
Center Speaker (SKC-560C)
Surround Speakers (SKM-560S L/R)
Surround Back Speakers (SKB-560 L/R)
Subwoofer (SKW-560)
Dock for iPod (DS-A1L)
Connection .................................... 21
Turning On & First Time Setup..... 41
Basic Operation
Playing your AV components ....... 47
Using the Tuner............................ 51
SIRIUS Satellite Radio ................ 55
DS-A1L Dock for the iPod............ 65
Instruction Manual
Enjoying the Listening Modes ..... 67
Thank you for purchasing an Onkyo 7.1ch Home
Theater System. Please read this manual thoroughly
before making connections and plugging in the unit.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new 7.1ch Home Theater System.
Please retain this manual for future reference.
Advanced Operation ..................... 74
Troubleshooting ............................ 90
Specifications................................ 93
En
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING
TO
QUALIFIED
SERVICE
PERSONNEL.
WARNING
AVIS
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Important Safety Instructions
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
2
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand, PORTABLE CART WARNING
tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to
avoid injury from tip-over.
S3125A
Unplug this apparatus during lightning storms or
when unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
15. Damage Requiring Service
Unplug the apparatus from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
A. When the power-supply cord or plug is damaged,
B. If liquid has been spilled, or objects have fallen
into the apparatus,
C. If the apparatus has been exposed to rain or
water,
D. If the apparatus does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the apparatus to its normal operation,
E. If the apparatus has been dropped or damaged in
any way, and
F. When the apparatus exhibits a distinct change in
performance this indicates a need for service.
16. Object and Liquid Entry
Never push objects of any kind into the apparatus
through openings as they may touch dangerous voltage points or short-out parts that could result in a
fire or electric shock.
The apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as
vases shall be placed on the apparatus.
Don’t put candles or other burning objects on top of
this unit.
17. Batteries
Always consider the environmental issues and follow local regulations when disposing of batteries.
18. If you install the apparatus in a built-in installation,
such as a bookcase or rack, ensure that there is adequate ventilation.
Leave 20 cm (8") of free space at the top and sides
and 10 cm (4") at the rear. The rear edge of the shelf
or board above the apparatus shall be set 10 cm (4")
away from the rear panel or wall, creating a flue-like
gap for warm air to escape.
Precautions
1. Recording Copyright—Unless it’s for personal use
only, recording copyrighted material is illegal without the permission of the copyright holder.
2. AC Fuse—The AC fuse inside the unit is not userserviceable. If you cannot turn on the unit, contact
your Onkyo dealer.
3. Care—Occasionally you should dust the unit all
over with a soft cloth. For stubborn stains, use a soft
cloth dampened with a weak solution of mild detergent and water. Dry the unit immediately afterwards
with a clean cloth. Don’t use abrasive cloths, thinners, alcohol, or other chemical solvents, because
they may damage the finish or remove the panel lettering.
4. Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE
FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY.
AC outlet voltages vary from country to country.
Make sure that the voltage in your area meets the
voltage requirements printed on the unit’s rear panel
(e.g., AC 230 V, 50 Hz or AC 120 V, 60 Hz).
The power cord plug is used to disconnect this unit
from the AC power source. Make sure that the plug
is readily operable (easily accessible) at all times.
Pressing the [ON/STANDBY] button to select
Standby mode does not fully shutdown the unit. If
you do not intend to use the unit for an extended
period, remove the power cord from the AC outlet.
5. Never Touch this Unit with Wet Hands—Never
handle this unit or its power cord while your hands
are wet or damp. If water or any other liquid gets
inside this unit, have it checked by your Onkyo
dealer.
6. Handling Notes
• If you need to transport this unit, use the original
packaging to pack it how it was when you originally bought it.
• Do not leave rubber or plastic items on this unit
for a long time, because they may leave marks on
the case.
• This unit’s top and rear panels may get warm
after prolonged use. This is normal.
• If you do not use this unit for a long time, it may
not work properly the next time you turn it on, so
be sure to use it occasionally.
For U.S. models
FCC Information for User
CAUTION:
The user changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
For Canadian Models
NOTE: THIS CLASS B DIGITAL APPARATUS
COMPLIES WITH CANADIAN ICES-003.
For models having a power cord with a polarized plug:
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
Modèle pour les Canadien
REMARQUE: CET APPAREIL NUMÉRIQUE DE
LA CLASSE B EST CONFORME À LA NORME
NMB-003 DU CANADA.
Sur les modèles dont la fiche est polarisée:
ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS
LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER
JUSQU’AU FOND.
3
Precautions—Continued
Speaker Precautions
For British models
Placement
Replacement and mounting of an AC plug on the power
supply cord of this unit should be performed only by
qualified service personnel.
• The subwoofer cabinet is made out of wood and is
therefore sensitive to extreme temperatures and
humidity, do not put it in locations subject to direct
sunlight or in humid places, such as near an air conditioner, humidifier, bathroom, or kitchen.
• Do not put water or other liquids close to the speakers.
If liquid is spilled over the speakers, the drive units
may be damaged.
• Speakers should only be placed on sturdy, flat surfaces
that are free from vibration. Putting them on uneven or
unstable surfaces, where they may fall and cause damage, will affect the sound quality.
• Subwoofer is designed to be used in the upright vertical position only. Do not use it in the horizontal or
tilted position.
• If the unit is used near a turntable, CD player or DVD
player, howling or slipping of sound may occur. To
prevent this, move the unit away from the turntable,
CD player or DVD player, otherwise lower the unit’s
output level.
IMPORTANT
The wires in the mains lead are coloured in accordance
with the following code:
Blue:
Neutral
Brown: Live
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as
follows:
The wire which is coloured blue must be connected to
the terminal which is marked with the letter N or
coloured black.
The wire which is coloured brown must be connected to
the terminal which is marked with the letter L or
coloured red.
IMPORTANT
The plug is fitted with an appropriate fuse. If the fuse
needs to be replaced, the replacement fuse must be
approved by ASTA or BSI to BS1362 and have the same
ampere rating as that indicated on the plug. Check for
the ASTA mark or the BSI mark on the body of the fuse.
If the power cord’s plug is not suitable for your socket
outlets, cut it off and fit a suitable plug. Fit a suitable
fuse in the plug.
For European Models
Declaration of Conformity
We, ONKYO EUROPE
ELECTRONICS GmbH
LIEGNITZERSTRASSE 6,
82194 GROEBENZELL,
GERMANY
declare in own responsibility, that the ONKYO product
described in this instruction manual is in compliance with the
corresponding
technical standards such as EN60065,
EN55013, EN55020 and EN61000-3-2, -3-3.
TVs and computer monitors are magnetically sensitive
devices and as such are likely to suffer discoloration or
picture distortion when conventional speakers are
placed nearby. To prevent this, the SKF-560F and
SKC-560C feature internal magnetic shielding. In some
situations, however, discoloration may still be an issue,
in which case you should turn off your TV or monitor,
wait 15 to 30 minutes, and then turn it back on again.
This normally activates the degaussing function, which
neutralizes the magnetic field, thereby removing any
discoloration effects. If discoloration problems persist,
try moving the speakers away from your TV or monitor.
Note that discoloration can also be caused by a magnet
or demagnetizing tool that’s too close to your TV or
monitor.
Do not place SKM-450S close to TV or a computer
monitor because they have no magnetic shield.
Input Signal Warning
GROEBENZELL, GERMANY
K. MIYAGI
ONKYO EUROPE ELECTRONICS GmbH
4
Using Close to a TV or Computer
The speakers can handle the specified input power when
used for normal music reproduction. If any of the following signals are fed to them, even if the input power is
within the specified rating, excessive current may flow
in the speaker coils, causing burning or wire breakage:
1. Interstation noise from an untuned FM radio.
2. Sound from fast-forwarding a cassette tape.
3. High-pitched sounds generated by an oscillator,
electronic musical instrument, and so on.
4. Amplifier oscillation.
5. Special test tones from audio test CDs and so on.
6. Thumps and clicks caused by connecting or disconnecting audio cables (Always turn off your amplifier
before connecting or disconnecting cables.)
7. Microphone feedback.
Package Contents
Make sure you have the following items:
AV Receiver HT-R560
Speaker Package HTP-560
Front speakers
(SKF-560F L/R)
HT-R560
Center speaker
(SKC-560C)
Remote controller and two batteries (AA/R6)
Surround speakers
(SKM-560S L/R)
Speaker setup microphone
Surround back
speakers
(SKB-560 L/R)
Indoor FM antenna
Subwoofer (SKW-560)
AM loop antenna
(Red)
*
Power-plug adapter
Only supplied in certain countries. Use this adapter if
your AC outlet does not match with the plug on the AV
receiver’s power cord. (Adapter varies from country to
country.)
*How to mount the AC plug:
(White)
(Green)
Speaker cable for front speakers and center speaker
10 ft. (3.0 m)
(Blue)
(Gray)
(Brown)
(Tan)
Speaker cables for surround and surround back
speakers 30 ft. (9 m)
RCA cable for subwoofer connection 10 ft. (3 m)
4 floor pads for the subwoofer
5
Package Contents—Continued
Dock for iPod DS-A1L
*
6
In catalogs and on packaging, the letter at the end of the product
name indicates the color. Specifications and operation are the same
regardless of color.
Using Two Sets of Speakers
Speaker Sets A and B
You can use two sets of speakers with the AV receiver: speaker set A and speaker set B.
Speaker set A should be used in your main listening room for up to 7.1-channel playback.
*While speaker set B is on, speaker set A is reduced to 5.1-channel playback.
Speaker set B can be used in another room and offers 2-channel stereo playback.
*Only analog input sources are output by speaker set B.
MASTER VOLUME
TUNING
A SPEAKERS
ON/STANDBY
PRESET
B
STANDBY
ENTER
or
DOCK
MULTI CH
DVD
VCR/DVR
CBL/SAT
AUX
TAPE
TUNER
CD
SETUP
RETURN
AUX INPUT
PHONES
SETUP MIC
A SPEAKERS B
TONE
MOVIE/TV
MUSIC
GAME
DISPLAY DIGITAL INPUT
L
VIDEO
AUDIO
R
RT/PTY/TP MEMORY TUNING MODE
CLEAR
AV RECEIVER
Speaker set A
On
Speaker set B
Indicator
On
A
Off
A
On
Off
HT-R560
Output
B
Set A: 5.1 channels
Set B: 2 channels
B
Set B: 2 channels
Set A: 7.1 channels
Off
No sound
Main Room (speaker set A)
Center speaker
Front left
speaker
Front right
speaker
Subwoofer
Sub Room (speaker set B)
Surround
right
speaker
Surround
left
speaker
Surround back
left speaker
Surround back
right speaker
* While speaker set B is on, the surround
back speakers output no sound.
* Digital input sources are not output
by speaker set B. Connect your
source component with an analog
connection.
7
Features
AV Receiver HT-R560
Amplifier
• 75 Watts/Channel @ 8 ohms (FTC)
• 130 Watts/Channel @ 6 ohms (IEC)
• WRAT-Wide Range Amplifier Technology
(5Hz–100kHz bandwidth)
• High-Current Low-Impedance Drive
• Optimum Gain Volume Circuitry
• H.C.P.S. (High Current Power Supply) Massive High
Power Transformer
Processing
• Dolby Digital EX and Pro Logic IIx*1
• DTS and DTS-ES, DTS 96/24 and DTS Neo:6 Processing*2
• Direct Mode
• Music Optimizer*3 for Compressed Music
• CinemaFILTER
• Non-Scaling Configuration
• A-Form Listening Mode Memory
• 24-bit/192kHz D/A Converters
• Powerful and Highly Accurate 32-bit DSP Processing
Connections
• 3 HDMI*4 Inputs and 1 Output
• HDTV-Ready Component Video Switching (2 Inputs/
1 Output)
• 4 Digital Inputs (2 Optical/2 Coaxial/4 Assignable)
• 3 S-Video Inputs/2 Outputs
• Color-Coded 7.1 Multichannel Inputs (Ready for
Dolby Digital and DTS Formats for High-Definition
Discs)
• Subwoofer Pre Outs
• Dedicated DOCK jack for quick and simple DS-A1L
Dock connection and iPod playback
Miscellaneous
• 40 AM/FM/SIRIUS*5 Presets
• Audyssey 2EQ*6 Room Correction and Speaker Calibration
• Audyssey Dynamic EQ Loudness Correction
• Crossover Adjustment (40/50/60/80/100/120/150/
200Hz)
• A/V Sync Control Function (up to 100 ms)
• Theater Dimensional Virtual Surround Function*7
• Preprogrammed
-Compatible Remote
Speaker Package HTP-560
SKF-560F L/R 2-Way Front Speakers
• 12 cm OMF cone woofer
• 2.5 cm Balanced dome tweeter
• Max. input power:130 W
• Magnetically shielded
• 8-ohm impedance
• Color-coded speaker terminals and speaker cable
SKM-560S L/R Full-Range Surround Speakers
SKB-560 L/R Full-Range Surround Back Speakers
• 8 cm full-range speaker
• Max. input power:130 W
• 8-ohm impedance
• Color-coded speaker terminals and speaker cable
SKC-560C 2-Way Center Speaker
• 8 cm OMF cone woofer × 2
•
•
•
•
•
2.5 cm Balanced dome tweeter
Max. input power:130 W
Magnetically shielded
8-ohm impedance
Color-coded speaker terminals and speaker cable
SKW-560 Bass Reflex Powered Subwoofer
• 25 cm cone woofer
• Max. power:290 W
Dock DS-A1L
• Play your iPod music through your Onkyo audio system and enjoy great sound
• Control your iPod with your Onkyo remote controller
• Supports all iPod models with an iPod connector,
except 3rd Generation iPod models
• Charges your iPod’s battery while you enjoy your
music
*1
Manufactured under license from Dolby Laboratories. Dolby,
Pro Logic and the double-D symbol are trademarks of Dolby
Laboratories.
*2
Manufactured under license under U.S. Patent #’s: 5,451,942;
5,956,674; 5,974,380;5,978,762; 6,226,616; 6,487,535;
7,003,467; 7,212,872 & other U.S. and worldwide patents
issued & pending. DTS, DTS Digital Surround, ES, and Neo:6
are registered trademarks and the DTS logos, Symbol and DTS
96/24 are trademarks of DTS, Inc. ©1996-2007 DTS, Inc. All
Rights Reserved.
8
Features—Continued
*3 Music Optimizer™ is a trademark of Onkyo Corporation.
*4
HDMI, the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.
*5
©2005 SIRIUS Satellite Radio Inc. “SIRIUS,” SiriusConnect,
the SIRIUS dog logo, channel names and logos are trademarks
of SIRIUS Satellite Radio Inc. Available only in the contiguous
United States (excluding Alaska and Hawaii) and Canada.
*6
Manufactured under license from Audyssey Laboratories. U.S.
and foreign patents pending. Audyssey 2EQ and Dynamic EQ
are trademarks of Audyssey Laboratories.
*7
Theater-Dimensional is a trademark of Onkyo Corporation.
* iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
9
Contents
Important Safety Instructions .......................... 2
Precautions ....................................................... 3
Speaker Precautions ........................................ 4
Package Contents ............................................ 5
AV Receiver HT-R560 ...........................................5
Speaker Package HTP-560 ......................................5
Dock for iPod DS-A1L ...........................................6
Using Two Sets of Speakers ........................... 7
Speaker Sets A and B ..............................................7
Sub Room (speaker set B) .......................................7
Main Room (speaker set A) .....................................7
Features ............................................................ 8
AV Receiver HT-R560 ...........................................8
Speaker Package HTP-560 ......................................8
Dock DS-A1L .........................................................8
Getting to Know the AV Receiver ................. 12
Front Panel ............................................................12
Display ..................................................................13
Rear Panel .............................................................14
Speaker Package ............................................ 16
Subwoofer (SKW-560) .........................................16
Front, Center, Surround, Surround Back speakers
(SKF-560F, SKC-560C, SKM-560S,
SKB-560) ............................................................17
Remote Controller .......................................... 18
Controlling the AV Receiver ................................18
Controlling a Dock DS-A1L .................................19
Installing the Batteries ...........................................20
Using the Remote Controller ................................20
Connecting Your Speakers ........................... 21
Enjoying Home Theater ........................................21
Connecting Speaker Set A ....................................23
Connecting Speaker Set B .....................................23
Wall Mounting ......................................................24
Using the Floor Pads for Subwoofer .....................24
Connecting Antennas .................................... 25
Connecting the Indoor FM Antenna .....................25
Connecting the AM Loop Antenna .......................25
Connecting an Outdoor FM Antenna ....................26
Connecting an Outdoor AM Antenna ...................26
Connecting Your Components ..................... 27
About AV Connections .........................................27
Connecting Audio and Video Signals
to the AV Receiver .............................................28
Which Connections Should I Use? .......................28
Connecting a TV or Projector ...............................29
Connecting a DVD player .....................................30
Connecting a VCR or DVR for Playback .............32
Connecting a VCR or DVR for Recording ...........33
Connecting a Satellite, Cable, or Terrestrial
Set-top box or Other Video Source ....................34
Connecting Components with HDMI ...................35
10
Making HDMI Connections ................................. 36
Connecting a Camcorder, Game Console,
or Other Device .................................................. 37
Connecting the Supplied DS-A1L Dock .............. 37
Connecting a CD Player or Turntable .................. 38
Connecting a Cassette, CDR, MiniDisc,
or DAT Recorder ............................................... 39
Connecting Onkyo
Components ................... 40
Connecting the Power Cord .................................. 40
Turning On the AV Receiver ..........................41
Turning On and Standby ...................................... 41
First Time Setup ..............................................42
Automatic Speaker Setup (Audyssey 2EQ) ......... 42
HDMI Input Setup ................................................ 44
Component Video Input Setup ............................. 45
Digital Input Setup ............................................... 46
Changing the Input Display .................................. 46
Playing Your AV Components .......................47
Basic AV Receiver Operation .............................. 47
Common Functions ........................................48
Setting the Display Brightness ............................. 48
Muting the AV Receiver ...................................... 48
Using the Sleep Timer .......................................... 48
Using Headphones ................................................ 49
Displaying Source Information ............................ 49
Specifying the Digital Signal Format ................... 50
Listening to the Radio ....................................51
AM Frequency Step Setup
(on some models) ............................................... 51
Listening to AM/FM Stations ............................... 52
Presetting AM/FM Stations .................................. 54
Listening to SIRIUS Satellite Radio ...............55
Listening to SIRIUS Satellite Radio®
(Only North American Model) ........................... 55
Setting the Satellite Radio Mode .......................... 56
Selecting SIRIUS Satellite Radio ......................... 56
Signing Up for SIRIUS Satellite Radio ................ 56
Selecting SIRIUS Satellite Radio Channels ......... 57
Displaying SIRIUS Satellite Radio Information .. 59
Positioning the SiriusConnect Home Tuner ......... 60
Parental Lock ........................................................ 61
Changing the PIN Number ................................... 62
Using RDS (European models only) .................... 63
DS-A1L Dock for the iPod ..............................65
About the DS-A1L Dock ...................................... 65
Compatible iPod models ....................................... 65
Putting Your iPod in the Dock ............................. 65
Function Overview ............................................... 65
Using the Listening Modes ............................67
Selecting the Listening Modes ............................. 67
Listening Modes Available for Each
Source Format .................................................... 68
About the Listening Modes .................................. 71
Contents—Continued
Recording ........................................................ 73
Recording the Input Source ...................................73
Recording from Different AV Sources .................73
Adjusting the Listening Modes ..................... 74
Using the Audio Adjust Settings ...........................74
Using the Audio Settings ......................................75
Advanced Setup ............................................. 77
Speaker Setup ........................................................77
Controlling Other Components ..................... 82
Preprogrammed Remote Control Codes ...............82
Entering Remote Control Codes ...........................82
Resetting the Remote Controller ...........................83
Controlling a DVD Player, or DVD Recorder ......84
Controlling a VCR, or PVR ..................................85
Controlling a Satellite Receiver
or Cable Receiver ...............................................86
Controlling a CD Player, CD Recorder,
or MD Player ......................................................87
Controlling a Cassette Recorder ............................88
Controlling a TV ...................................................89
Troubleshooting ............................................. 90
Specifications ................................................. 93
7.1ch Home Theater Speaker Package ..................94
Dock DS-A1L .......................................................94
* To reset the AV receiver to its factory defaults, turn
it on and, while holding down the [VCR/DVR] button, press the [ON/STANDBY] button (see
page 90).
11
Getting to Know the AV Receiver
Front Panel
North American model
3
1 2
4
5
6
7 8
9
MASTER VOLUME
TUNING
ON/STANDBY
PRESET
STANDBY
ENTER
MULTI CH
DOCK
DVD
VCR/DVR
CBL/SAT
AUX
TAPE
TUNER
CD
SETUP
RETURN
AUX INPUT
PHONES
SETUP MIC
A SPEAKERS B
TONE
MOVIE/TV
MUSIC
DISPLAY DIGITAL INPUT
GAME
DIMMER
L
VIDEO
AUDIO
R
MEMORY TUNING MODE
CLEAR
AV RECEIVER
J
K
L
MN O PQ RST
U
HT-R560
V
Other models
MASTER VOLUME
TUNING
ON/STANDBY
PRESET
STANDBY
ENTER
DOCK
MULTI CH
DVD
VCR/DVR
CBL/SAT
AUX
TAPE
TUNER
CD
SETUP
RETURN
AUX INPUT
PHONES
SETUP MIC
A SPEAKERS B
TONE
MOVIE/TV
MUSIC
GAME
DISPLAY DIGITAL INPUT
VIDEO
L
AUDIO
R
RT/PTY/TP MEMORY TUNING MODE
CLEAR
AV RECEIVER
HT-R560
R
The actual front panel has various logos printed on it. They are not shown here for clarity.
The page numbers in parentheses show where you can find the main explanation for each item.
A ON/STANDBY button (41)
Sets the AV receiver to On or Standby.
B STANDBY indicator (41)
Lights up when the AV receiver is on Standby and
flashes while a signal is being received from the
remote controller.
C Input selector buttons (47)
Select the following input sources: DVD,
VCR/DVR, CBL/SAT, AUX, TAPE, TUNER, CD,
DOCK.
The [MULTI CH] button selects the multichannel
DVD input.
D Remote-control sensor (20)
Receives control signals from the remote controller.
E Display
See “Display” on page 13.
12
F SETUP button
Opens and closes the setup menus.
G TUNING, PRESET, Arrow, and ENTER
buttons
When AM or FM is selected, the TUNING [ ]
[ ] buttons are used for radio tuning, and the PRESET [ ] [ ] buttons are used to select radio presets (see page 54). With the setup menus, they work
as arrow buttons and are used to select and set
items. The ENTER button is also used with the
setup menus.
H RETURN button
Selects the previously displayed setup menu.
Getting to Know the AV Receiver—Continued
For detailed information, see the pages in parentheses.
I MASTER VOLUME control (47)
Q DIGITAL INPUT button (46)
Sets the volume of the AV receiver to Min, 1
through 79, or Max.
J PHONES jack (49)
This 1/4-inch phone jack is for connecting a standard pair of stereo headphones for private listening.
K SPEAKER A B buttons
Turn speaker set A and B on or off.
Used to assign digital inputs to input selectors.
R DIMMER (RT/PTY/TP) button (64, 48)
Adjusts the display brightness.
On the European modes, this is the RT/PTY/TP button, and it’s used with RDS (Radio Data System).
See “Using RDS (European models only)” on
page 63.
S MEMORY button (54)
L TONE, –, and + buttons (75)
Used when storing or deleting radio presets.
Used to adjust the tone (bass and treble).
T TUNING MODE button (52)
M MOVIE/TV button (67)
Selects the listening modes intended for use with
movies and TV.
N MUSIC button (67)
Selects the listening modes intended for use with
music.
O GAME button (67)
Selects the listening modes intended for use with
video games.
P DISPLAY button (49)
Selects the Auto or Manual tuning mode for AM
and FM radio.
U SETUP MIC (42)
The automatic speaker setup microphone connects
here.
V AUX INPUT (37, 73)
Used to connect a camcorder, game console, and so
on. There are input jacks for composite video and
analog audio.
Displays various information about the currently
selected input source.
Display
1 2
5
3
6
4
7
For detailed information, see the pages in parentheses.
1 SLEEP indicator (48)
Lights up when the Sleep function has been set.
2 MUTING indicator (48)
Flashes while the AV receiver is muted.
3 Listening mode and format indicators (67)
Show the selected listening mode and audio input
signal format.
4 Tuning indicators (52)
FM STEREO (52): Lights up when tuned to a stereo FM station.
TUNED (52): Lights up when tuned to a radio station.
5 Message area
Displays various information.
6 Audio input indicators
Indicate the type of audio input that’s selected as the
audio source: PCM, MULTI CH, or HDMI.
7 Audyssey indicator (43)
Lights up during automatic speaker setup.
RDS (63): Lights up when tuned to a radio station
that supports RDS (Radio Data System).
AUTO (52): Lights up when Auto Tuning mode is
selected for AM or FM radio. Goes off when Manual Tuning mode is selected.
13
Getting to Know the AV Receiver—Continued
Rear Panel
8 Only North American model
1 2
3
4
IN 3
HDMI
5
6 7
IN 1
IN 2
9
J
OUT
SURR BACK SPEAKERS
ASSIGNABLE
DIGITAL IN
SURR SPEAKERS
FRONT SPEAKERS A
L
L
R
R
COMPONENT VIDEO
Y
DOCK
1
AM
SIRIUS
(DVD)
COAXIAL
VCR/DVR
CBL/SAT
CB/ PB
2
DVD
MONITOR
OUT
V
(CBL/SAT)
CENTER SPEAKER
V
ANTENNA
CR/ PR
1
IN 2
IN 1(DVD)
OUT
ASSIGNABLE
2
S
S
(VCR/DVR)
OPTICAL
(CD)
IN
IN
OUT
IN
OUT
IN
IN
IN
OUT
IN
FRONT
SURR
FM
75
PRE OUT
CENTER SURR BACK
L
ASSIGNABLE
L
L
R
R
SUB
WOOFER
L
R
R
REMOTE
CONTROL
CD
K
TAPE
L M
CBL/SAT
VCR/DVR
N OP
DVD
SUB
WOOFER
FRONT SPEAKERS B
Q
R
A DIGITAL IN OPTICAL 1 and 2
These optical digital audio inputs are for connecting
components with an optical digital audio output,
such as a CD player or DVD player. They’re assignable, which means you can assign each one to an
input selector to suit your setup. See “Digital Input
Setup” on page 46.
The HDMI outputs are for connecting a TV or projector with an HDMI input.
F DOCK
This jack is for connecting the supplied DS-A1L
Dock.
G MONITOR OUT
The S-Video or composite video jack should be
connected to a video input on your TV or projector.
B DIGITAL IN COAXIAL 1 and 2
These coaxial digital audio inputs are for connecting components with a coaxial digital audio output,
such as a CD player or DVD player. They’re assignable, which means you can assign each one to an
input selector to suit your setup. See “Digital Input
Setup” on page 46.
H SIRIUS (only for the North American model)
This jack is for connecting the SiriusConnect
receiver (not supplied).
I AM and FM ANTENNA
The AM push terminals are for connecting an AM
antenna. The FM jack is for connecting an FM
antenna.
C COMPONENT VIDEO IN 1 and 2
These RCA component video inputs are for connecting components with a component video output,
such as a DVD player, DVD recorder, or DVR (digital video recorder). They’re assignable, which
means you can assign each one to an input selector
to suit your setup. See “Component Video Input
Setup” on page 45.
D COMPONENT VIDEO OUT
This RCA component video output is for connecting a TV or projector with a component video input.
E HDMI IN 1–3 and OUT
HDMI (High Definition Multimedia Interface) connections carry digital audio and digital video.
The HDMI inputs are for connecting components
with an HDMI output, such as a DVD player, DVD
recorder, or DVR (digital video recorder). They’re
assignable, which means you can assign each one to
an input selector to suit your setup. See “HDMI
Input Setup” on page 44.
14
S
J FRONT L/R, CENTER, SURR L/R, and SURR
BACK L/R SPEAKERS
These terminal posts are for connecting the front
speakers, center, surround, and surround back
speakers.
K
REMOTE CONTROL
This
(Remote Interactive) jack can be connected to the
jack on another
-capable
Onkyo component for remote and system control.
To use
, you must make an analog audio connection (RCA) between the AV receiver and the other
component, even if they are connected digitally.
L CD IN
This analog audio input is for connecting a CD
player’s analog audio output.
Getting to Know the AV Receiver—Continued
M TAPE IN/OUT
These analog audio input and output jacks are for
connecting a recorder with an analog audio input
and output, such as a cassette deck, MD recorder,
etc.
N CBL/SAT IN
A cable or satellite receiver can be connected here.
There are S-Video and composite video input jacks
for connecting the video signal, and there are analog
audio input jacks for connecting the audio signal.
O VCR/DVR IN/OUT
A video component, such as a VCR or DVR, can be
connected here for recording and playback. There
are S-Video and composite video input and output
jacks for connecting the video signal, and there are
analog audio input jacks for connecting the audio
signal.
P DVD IN
This input is for connecting a DVD player. There
are S-Video and composite video input jacks for
connecting the video signal.
Q DVD FRONT L/R, CENTER, SUBWOOFER,
SURR L/R, and SURR BACK L/R
This analog multichannel input is for connecting a
component with a 5.1/7.1-channel analog audio output, such as a DVD player, DVD-Audio or
SACD-capable player, or an MPEG decoder.
R SUBWOOFER PRE OUT
This analog audio output can be connected to a
powered subwoofer.
S FRONT SPEAKERS B
These push terminals are for connecting speaker
set B.
See pages 21–40 for hookup information.
15
Speaker Package
Subwoofer (SKW-560)
For detailed information, see the pages in parentheses.
A STANDBY/ON indicator
■ Front
1
Red:
Blue:
Subwoofer in standby mode
Subwoofer on
With the Auto Standby function, the SKW-560
automatically turns on when an input signal is
detected in Standby mode. When there’s no input
signal for a while, the SKW-560 automatically
enters Standby mode.
B OUTPUT LEVEL control (47)
This control is used to adjust the volume of the subwoofer.
C LINE INPUT (23)
This RCA input should be connected to the subwoofer pre out on the AV receiver with supplied
RCA cable.
■ Rear
Note:
The Auto Standby function turns the subwoofer on when
the input signal exceeds a certain level. If the Auto
Standby function does not work reliably, try slightly
increasing or decreasing the subwoofer output level on
the AV receiver (page 80).
2
To AC outlet
16
3
Speaker Package—Continued
Front, Center, Surround, Surround Back speakers
(SKF-560F, SKC-560C, SKM-560S, SKB-560)
■ Rear
SKF-560F
SKM-560S/SKB-560
1
1
2
2
SKC-560C
1
2
1 Keyhole slots
These keyhole slots can be used to wall-mount the
speaker. See page 24 for mounting instructions.
2 Speaker terminals
These push terminals are for connecting the speaker
to the HT-R560 with the supplied speaker cables.
The supplied speaker cables are color-coded for
easy identification. Simply connect each cable to the
same-colored positive speaker terminal.
17
Remote Controller
Controlling the AV Receiver
C MULTI CH button (47)
■ Controlling the receiver
Selects the multichannel DVD input.
To control the AV receiver, press the [RECEIVER]
REMOTE MODE button to select Receiver mode
first.
You can also use the remote controller to control
your DVD player, CD player, and other components.
See page 82 for more details.
D SP A/B button
Turns speaker set A or B on or off.
E Arrow [ ]/[ ]/[ ]/[ ] and ENTER buttons
Used to select and adjust settings.
F SETUP button
Used to change settings.
G LISTENING MODE buttons (67)
Used to select the listening modes.
A
2
3
RECEIVER
94
TUNER
6
Adjusts the display brightness.
I DISPLAY button (49)
Displays information about the current input source.
J
K
4
15
H DIMMER button (48)
5
J MUTING button (48)
Mutes or unmutes the AV receiver.
K VOL [ ]/[ ] button (47)
Adjusts the volume of the AV receiver regardless of
the currently selected remote controller mode.
L RETURN button
L
M
Returns to the previous display when changing settings.
M AUDIO button (75)
Used to change audio settings.
N SLEEP button (48)
Used with the Sleep function.
7
■ Controlling the tuner
To control the AV receiver’s tuner, press the [TUNER]
(or [RECEIVER]) REMOTE MODE button. You can
select AM or FM by pressing the [TUNER] button
repeatedly.
2
38
N
1 Arrow [ ]/[ ]/[ ]/[ ] buttons
Used to tune into radio stations and select preset.
2 Number buttons (53)
Used to select AM and FM radio stations and preset
stations directly.
3 D.TUN button (53)
Selects the Direct tuning mode.
For detailed information, see the pages in parentheses.
A ON/STANDBY button (41)
Sets the AV receiver to On or Standby.
B REMOTE MODE/INPUT SELECTOR buttons
(47, 84–89)
Selects the remote controller modes and the input
sources.
18
4 DISPLAY button(53)
Displays information about the band, frequency,
preset number, and so on.
5 CH +/– button (54)
Selects radio presets.
Note:
• An Onkyo cassette recorder connected via
also be controlled in Receiver (see page 88).
can
Remote Controller—Continued
Controlling a Dock DS-A1L
To control your iPod when it’s seated in the supplied
DS-A1L Dock, which is connected to the HT-R560’s
DOCK jack, press the [DOCK] REMOTE MODE button.
See page 37 for details on connecting the DS-A1L Dock.
To control an RI Dock other than the DS-A1L, see “Controlling Other Components” on page 82.
7
A
C Previous [
] button
Restarts the current song. Press it twice to select the
previous song.
D Rewind [
] button
Press and hold to rewind.
E Pause [ ] button
Pauses playback. (With 3rd generation iPod models,
it works as a Play/Pause button.)
F REPEAT button*
Used with the repeat function.
G DISPLAY button*
DOCK
H MUTING button (48)
J
I ALBUM +/– button*
K
L
2
Mutes or unmutes the AV receiver.
Selects the next or previous album.
J VOL [ ]/[ ] button (47)
Adjusts the volume of the AV receiver.
K MENU button*
Displays a menu.
M
3
N
4
5
6
O
P
*
Turns on the backlight for 30 seconds.
8
9
Q
R
With some components, certain buttons may not
work as expected, and some may not work at all.
L PLAYLIST [ ]/[ ] buttons*
Selects the previous or next playlist on the iPod.
M Play [ ] button
Starts playback. If the component is off, it will turn
on automatically. (With 3rd generation iPod models,
this button works as a Play/Pause button.)
N Next [
] button
Selects the next song.
O Fast Forward [
] button
Press and hold to fast forward.
P Stop [ ] button
Stops playback and displays a menu.
Q PLAY MODE button
A ON/STANDBY button
Turns the iPod on or off.
Notes:
• Your iPod many not respond the first time you
press this button, in which case you should press
it again. This is because the remote controller
transmits the On and Standby commands alternately, so if your iPod is already on, it will remain
on when the remote controller transmits an On
command. Similarly, if your iPod is already off, it
will remain off when the remote controller transmits an Off command.
Selects play modes on components with selectable
play modes.
R RANDOM button*
Used with the shuffle function.
*Buttons marked with an asterisk (*) are not supported
by 3rd generation iPod models.
B Arrow [ ]/[ ] and ENTER buttons*
Used to navigate menus and select items.
19
Remote Controller—Continued
Installing the Batteries
1
To open the battery compartment, press
the small lever and remove the cover.
Using the Remote Controller
When using the remote controller, point it toward the AV
receiver’s remote control sensor, as shown below.
Remote control sensor
STANDBY indicator
AV receiver
30˚
2
3
Insert the two supplied batteries (AA/R6)
in accordance with the polarity diagram
inside the battery compartment.
Replace the cover and push it shut.
Notes:
• If the remote controller doesn’t work reliably, try
replacing the batteries.
• Don’t mix new and old batteries or different types of
batteries.
• If you intend not to use the remote controller for a long
time, remove the batteries to prevent damage from
leakage or corrosion.
• Expired batteries should be removed as soon as possible to prevent damage from leakage or corrosion.
20
30˚
Approx. 16 ft.
(5 m)
Notes:
• The remote controller may not work reliably if the AV
receiver is subjected to bright light, such as direct sunlight or inverter-type fluorescent lights. Keep this in
mind when installing.
• If another remote controller of the same type is used in
the same room, or the AV receiver is installed close to
equipment that uses infrared rays, the remote controller may not work reliably.
• Don’t put anything on top of the remote controller,
such as a book or magazine, because a button may be
pressed continuously, thereby draining the batteries.
• The remote controller may not work reliably if the AV
receiver is installed in a rack behind colored glass
doors. Keep this in mind when installing.
• The remote controller will not work if there’s an obstacle between it and the AV receiver’s remote control
sensor.
Connecting Your Speakers
Enjoying Home Theater
Thanks to the AV receiver’s superb capabilities, you can enjoy surround sound with a real sense of movement in your
own home—just like being in a movie theater or concert hall. You can enjoy DVDs featuring Dolby Digital or DTS.
With analog or digital TV, you can enjoy Dolby Pro Logic IIx, DTS Neo:6, or Onkyo’s original DSP listening modes.
Front left and right speakers (SKF-560F)
These output the main sound. Their role in a home theater is to provide a solid
anchor for the sound image. They should be positioned facing the listener at
about ear level, and equally spaced from the TV. Angle them inward slightly so
as to create a triangle, with the listener at the apex.
Surround left and right speakers
(SKM-560S)
These speakers are used for precise
sound positioning and to add realistic
ambience.
Position them at the sides of the listener, or slightly behind, about 2–3 feet
(60–100 cm) above ear level. Ideally
they should be equally spaced from the
listener.
Center speaker (SKC-560C)
This speaker enhances the front left
and right speakers, making sound
movements distinct and providing a
full sound image. For movies it’s used
mainly for dialog.
Position it close to your TV (preferably
on top) facing forward at about ear
level, or at the same height as the
front left and right speakers.
Subwoofer (SKW-560)
The subwoofer handles the bass sounds of
the LFE (Low-Frequency Effects) channel.
The volume and quality of the bass output
from your subwoofer will depend on its position, the shape of your listening room, and
your listening position. In general, a good bass
sound can be obtained by installing the subwoofer in a front corner, or at one-third the way
along the front wall, as shown.
Surround back left and right speakers (SKB-560)
These speakers are necessary to enjoy Dolby Digital
EX, DTS-ES Matrix, DTS-ES Discrete, etc. They
enhance the realism of surround sound and improve
sound localization behind the listener. Position them
behind the listener about 2–3 feet (60–100 cm) above
ear level.
Tip: To find the best position for your subwoofer, while playing a movie or some music
with good bass, experiment by placing your
subwoofer at various positions within the room
and choose the one that provides the most
satisfying results.
Corner
position
1/3 of wall
position
21
Connecting Your Speakers—Continued
Speaker Configuration
Speaker Connection Precautions
For 7.1-channel surround-sound playback, you need
seven speakers and a powered subwoofer.
Read the following before connecting your speakers:
The following table shows which channels you should
use based on the number of speakers you have.
Number of speakers:
2
3
4
5
6
7
Front left
✓
✓
✓
✓
✓
✓
Front right
✓
✓
✓
✓
✓
✓
✓
✓
✓
Center
✓
Surround left
✓
✓
✓
✓
Surround right
✓
✓
✓
✓
Surround back*
✓
Surround back left
✓
Surround back right
✓
* If you’re using only one surround back speaker, connect it to the
SURR BACK L terminals.
No matter how many speakers you use, a powered subwoofer is recommended for a powerful and solid bass.
To get the best from your surround-sound system, you
must set the speaker settings. You can do this automatically (see page 42) or manually (see page 77).
22
• You can connect speakers with an impedance of
between 8 and 16 ohms. If you use speakers with a
lower impedance, and use the amplifier at high volume
levels for a long period of time, the built-in amp protection circuit may be activated.
• Disconnect the power cord from the wall outlet before
making any connections.
• Read the instructions supplied with your speakers.
• Pay close attention to speaker wiring polarity. Connect
positive (+) terminals to only positive (+) terminals,
and negative (–) terminals to only negative (–) terminals. If you get them the wrong way around, the sound
will be out of phase and will sound unnatural.
• Unnecessarily long or very thin speaker cables may
affect the sound quality and should be avoided.
• Be careful not to short the
positive and negative wires.
Doing so may damage the AV
receiver.
• Don’t connect more than one
cable to each speaker terminal. Doing so may damage the
AV receiver.
• Don’t connect a speaker to several terminals.
Connecting Your Speakers—Continued
Connecting Speaker Set A
Connecting Speaker Set B
1
Strip 5/8" (15 mm) of insulation from the ends of the
speaker cables, and twist
the bare wires tightly, as
shown.
2
Unscrew the terminal. Fully insert the bare wire,
making sure that it’s touching the threaded shaft
in the center. Screw the terminal tight.
5/8" (15 mm)
1
Strip 3/8" (10 mm) of insulation from the ends of the
speaker cables, and twist
the bare wires tightly, as
shown.
2
While pressing the lever, insert
the wire into the hole, and then
release the lever.
Make sure that the terminals are
gripping the bare wires, not the
insulation.
3/8" (10 mm)
Note:
While speaker set B is on, speaker set A is reduced to
5.1-channel playback.
Speaker Set A
Front right
speaker
Front left
speaker
The following illustration shows which speaker should be
connected to each pair of terminals.
Center
speaker
If you’re using only one surround back speaker, connect it
to the left (L) SURR BACK SPEAKERS terminals.
IN 3
IN 1
IN 2
OUT
SURR BACK SPEAKERS
SURR SPEAKERS
FRONT SPEAKERS A
L
L
R
R
ONENT VIDEO
CBL/SAT
AM
SIRIUS
DOCK
VCR/DVR
DVD
MONITOR
OUT
V
CENTER SPEAKER
V
S
S
IN
OUT
IN
IN
IN
OUT
IN
FRONT
SURR
SURR BACK SPEAKERS
ANTENNA
FM
75
L
L
DVD
SUB
WOOFER
Front right
speaker
R
R
CENTER
SPEAKER
R
VCR/DVR
L
L
SUB
WOOFER
R
CBL/SAT
FRONT SPEAKERS A
PRE OUT
CENTER SURR BACK
R
SURR SPEAKERS
L
FRONT SPEAKERS B
Front left
speaker
Powered
subwoofer
Surround
back right
speaker
Surround
back left
speaker
Surround
right
speaker
Surround
left
speaker
Speaker Set B
23
Connecting Your Speakers—Continued
Wall Mounting
The speakers can easily be wall mounted by using the
keyhole slots.
To mount the front or surround speakers vertically, use
the keyhole slot shown to hang each speaker on a screw
that’s securely screwed into the wall.
Leave a gap of between
3/16" (5 mm) and 7/16"
(10 mm) between the wall
and the base of the screw
head, as shown.
(We recommend that you
consult a home installation professional.)
Wall
3/16" – 7/16"
(5 mm) – (10 mm)
Front speaker (SKF-560F)
Keyhole slot for
wall mounting
Using the Floor Pads for Subwoofer
If the subwoofer is placed on a hard floor (wood, vinyl,
tile, etc.) and playback is very loud, the subwoofer's feet
may damage the flooring. To prevent this, place the supplied pads underneath the subwoofer's feet. The pads
also provide a stable base for the subwoofer.
Surround speaker/ Surround back speaker
(SKM-560S/SKB-560)
Keyhole slot for
wall mounting
To mount the center speaker horizontally, use the two
keyhole slots shown to hang each speaker on two screws
that are securely screwed into the wall.
Center speaker (SKC-560C)
Keyhole slots for wall mounting
11-13/16" (300 mm)
Caution:
A mounting screw’s ability to support a speaker depends
on how well it’s anchored to the wall. If you have hollow
walls, screw each mounting screw into a stud. If there are
no studs, or the walls are solid, use suitable wall anchors.
Use screws with a head diameter of 5/16" (9 mm) or less
and a shank diameter of 1/8" (4 mm) or less. With hollow
walls, use a cable/pipe detector to check for any power
cables or water pipes before making any holes.
24
Pad
Connecting Antennas
This section explains how to connect the supplied indoor
FM antenna and AM loop antenna, and how to connect
commercially available outdoor FM and AM antennas.
The AV receiver won’t pick up any radio signals without
any antenna connected, so you must connect the antenna
to use the tuner.
AM antenna push terminals
Connecting the AM Loop Antenna
The supplied indoor AM loop antenna is for indoor use
only.
1
Assemble the AM loop antenna, inserting
the tabs into the base, as shown.
2
Connect both wires of the AM loop
antenna to the AM push terminals, as
shown.
(The antenna’s wires are not polarity sensitive, so
they can be connected either way around).
AM
ANTENNA
FM
75
FM antenna jack
Connecting the Indoor FM Antenna
The supplied indoor FM antenna is for indoor use only.
1
Attach the FM antenna, as shown.
■ American Model
FM
75
Insert the plug fully
into the jack.
Make sure that the wires are attached securely and
that the push terminals are gripping the bare
wires, not the insulation.
Push
Insert wire
Release
■ Other Models
AM
FM
75
ANTENNA
Insert the plug fully
into the jack.
Once your AV receiver is ready for use, you’ll
need to tune into an FM radio station and adjust
the position of the FM antenna to achieve the best
possible reception.
2
Use thumbtacks or something similar to
fix the FM antenna into position.
Once your AV receiver is ready for use, you’ll
need to tune into an AM radio station and adjust
the position of the AM antenna to achieve the best
possible reception.
Keep the antenna as far away as possible from
your AV receiver, TV, speaker cables, and power
cords.
If you cannot achieve good reception with the supplied
indoor AM loop antenna, try using it with a commercially available outdoor AM antenna (see page 26).
Thumbtacks, etc.
Caution: Be careful that you don’t injure yourself
when using thumbtacks.
If you cannot achieve good reception with the supplied
indoor FM antenna, try a commercially available outdoor FM antenna instead (see page 26).
25
Connecting Antennas—Continued
Connecting an Outdoor FM Antenna
Connecting an Outdoor AM Antenna
If you cannot achieve good reception with the supplied
indoor FM antenna, try a commercially available outdoor FM antenna instead.
If good reception cannot be achieved using the supplied
AM loop antenna, an outdoor AM antenna can be used in
addition to the loop antenna, as shown.
Outdoor antenna
Insulated antenna cable
FM
75
AM loop antenna
AM
Notes:
• Outdoor FM antennas work best outside, but usable
results can sometimes be obtained when installed in an
attic or loft.
• For best results, install the outdoor FM antenna well
away from tall buildings, preferably with a clear line
of sight to your local FM transmitter.
• Outdoor antenna should be located away from possible noise sources, such as neon signs, busy roads, etc.
• For safety reasons, outdoor antenna should be situated
well away from power lines and other high-voltage
equipment.
• Outdoor antenna must be grounded in accordance
with local regulations to prevent electrical shock hazards.
■ Using a TV/FM Antenna Splitter
It’s best not to use the same antenna for both FM and TV
reception, as this can cause interference problems. If circumstances demand it, use a TV/FM antenna splitter, as
shown.
TV/FM antenna splitter
To AV receiver
26
To TV (or VCR)
ANTENNA
Outdoor AM antennas work best when installed horizontally outside, but good results can sometimes be obtained
indoors by mounting horizontally above a window. Note
that the AM loop antenna should be left connected.
Outdoor antenna must be grounded in accordance with
local regulations to prevent electrical shock hazards.
Connecting Your Components
AV Connection Color Coding
About AV Connections
RCA-type AV connections are usually color coded: red,
white, and yellow. Use red plugs to connect rightchannel audio inputs and outputs (typically labeled “R”).
Use white plugs to connect left-channel audio inputs and
outputs (typically labeled “L”). And use yellow plugs to
connect composite video inputs and outputs.
• Before making any AV connections, read the manuals
supplied with your other AV components.
• Don’t connect the power cord until you’ve completed
and double-checked all AV connections.
Optical Digital Jacks
Left (white)
The AV receiver’s optical digital jacks have shutter-type
covers that open when an optical plug is inserted and
close when it’s removed. Push plugs in all the way.
Analog audio
Right (red)
(Yellow)
Caution: To prevent shutter damage, hold the optical
plug straight when inserting and removing.
Left (white)
Right (red)
Composite video
• Push plugs in all the way to make
good connections (loose connections can cause noise or malfunctions).
• To prevent interference, keep
audio and video cables away from
power cords and speaker cables.
(Yellow)
Right!
Wrong!
AV Cables and Jacks
Video
Cable
Jack
Description
HDMI connections can carry uncompressed standard- or high-definition digital video and audio and
offer the best picture and sound quality.
HDMI
HDMI
Component
video cable
Y
Y
PB
PB
PR
PR
Component video separates the luminance (Y) and
color difference signals (PR, PB), providing the best
picture quality. (Some TV manufacturers label their
component video jacks slightly differently.)
Y
CB/PB
CR/PR
S-Video cable
S
S-Video separates the luminance and color signals
and provides better picture quality than composite
video.
Composite
video cable
V
Composite video is commonly used on TVs, VCRs,
and other video equipment.
Audio
Optical digital
audio cable
OPTICAL
Coaxial digital
audio cable
COAXIAL
R
FRONT
Multichannel
analog audio
cable (RCA)
CENTER
SUBWOOFER
This offers the best sound quality and allows you to
enjoy Dolby Digital and DTS. The audio quality is
the same as for optical.
This cable carries analog audio. It’s the most
common connection format for analog audio and
can be found on virtually all AV components.
L
Analog audio
cable (RCA)
This offers the best sound quality and allows you to
enjoy Dolby Digital and DTS. The audio quality is
the same as for coaxial.
SURR
SURR BACK
MULTI CH
This cable carries multichannel analog audio and is
typically used to connect DVD players with a 7.1channel analog audio output. Several standard
analog audio cables can be used instead of a multichannel cable.
Note: The AV receiver does not support SCART connections.
27
Connecting Your Components—Continued
Connecting Audio and Video Signals to the AV Receiver
By connecting both the audio and video outputs of your DVD player and other AV components to the AV receiver, you
can switch the audio and video signals simultaneously simply by changing the input source on the AV receiver.
: Signal Flow
Video
Video
Audio
Audio
TV, projector,
etc.
DVD player, etc.
Speakers (see page 23 for hookup details)
Which Connections Should I Use?
The AV receiver supports several connection formats for compatibility with a wide range of AV equipment. The format
you choose will depend on the formats supported by your other components. Use the following sections as a guide.
For video components, you must make an audio connection and a video connection.
Video Connection Formats
Video equipment can be connected to the AV
receiver by using any one of the following
video connection formats: composite video,
S-Video, component video, or HDMI, the latter offering the best picture quality.
When choosing a connection format, bear in
mind that the AV receiver doesn’t convert
between formats, so only outputs of the same
format as the input will output the signal.
Video Signal Flow Chart
DVD player, etc.
Composite
S-Video
Component
HDMI
IN
AV receiver
MONITOR OUT
Composite
S-Video
Component
HDMI
TV, projector, etc.
Audio Connection Formats
Audio equipment can be connected to the AV
receiver by using any of the following audio
connection formats: analog, optical, coaxial,
analog multichannel, or HDMI.
When you connect audio equipment to an
HDMI, OPTICAL, or COAXIAL input, you
must assign that input to an input selector (see
pages 44 and 46).
Audio signals received by the HDMI IN jacks
are output only by the HDMI OUT (pass thru).
HDMI sources are not output by the speakers
connected to the AV receiver.
28
Audio Signal Flow Chart
DVD player, etc.
HDMI Multichannel
Optical
Coaxial
Analog
AV receiver
HDMI
MD recorder, etc.
Analog
Connecting Your Components—Continued
Connecting a TV or Projector
Step 1: Video Connection
Choose a video connection that matches your TV ( A , B , or C ), and then make the connection.
Step 2: Audio Connection
Choose an audio connection that matches your TV ( a , b , or c ), and then make the connection.
• To enjoy Dolby Digital and DTS, use connection b or c .
Connection
AV receiver
Signal flow
TV
Picture quality
A
COMPONENT VIDEO OUT
Component video input
Best
B
MONITOR OUT S
S-Video input
Better
C
MONITOR OUT V
⇒
⇒
⇒
⇐
⇐
⇐
Composite video input
Standard
a
CBL/SAT IN L/R
b
DIGITAL IN COAXIAL 2
c
DIGITAL IN OPTICAL 1
IN 3
HDMI
IN 2
Analog audio L/R output
Digital coaxial output
Digital optical output
IN 1
OUT
SURR BACK SPEAKERS
Bi-AMP for FRONT SPEAKERS
ASSIGNABLE
L
DIGITAL IN
COMPONENT VIDEO
Y
b
SIRIUS
DOCK
1
AM
(DVD)
COAXIAL
CBL/SAT
CB/ PB
2
VCR/DVR
DVD
V
(CBL/SAT)
C
MONITOR
OUT
V
R
ANTENNA
CR/ PR
1
c
S
S
(VCR/DVR)
OPTICAL
IN 2
IN 1(DVD)
OUT
ASSIGNABLE
2
(CD)
IN
IN
OUT
FM
75
IN
OUT
IN
IN
IN
OUT
IN
FRONT
B
SURR
ZONE 2
LINE OUT
CENTER SURR BACK
PRE OU
ASSIGNABLE
A
L
L
R
R
REMOTE
CONTROL
CD
TAPE
CBL/SAT
L
COAXIAL
OUT
Connect one or the other
Connection c must be assigned
(see page 46)
Hint!
OPTICAL
OUT
Y
PB
PR
COMPONENT VIDEO IN
DVD
VCR/DVR
SUB
WOOFER
L
L
R
R
SUB
WOOFE
a
R
AUDIO
OUT
S VIDEO
IN
VIDEO
IN
TV, projector,
etc.
If your TV has no audio outputs, connect an audio output from your VCR or cable or satellite
receiver to the AV receiver and use its tuner to listen to TV programs through the AV receiver (see
pages 32 and 34).
29
Connecting Your Components—Continued
Connecting a DVD player
Step 1: Video Connection
Choose a video connection that matches your DVD player ( A , B , or C ), and then make the connection.
You must connect the AV receiver to your TV with the same type of connection.
Step 2: Audio Connection
Choose an audio connection that matches your DVD player ( a , b , or c ), and then make the connection.
• To enjoy Dolby Digital and DTS, use connection b or c .
• If your DVD player has main left and right outputs and multichannel left and right outputs, be sure to use the
main left and right outputs for connection a .
Connection
AV receiver
Signal flow
DVD player
Picture quality
A
COMPONENT VIDEO IN 1
Component video output
Best
B
DVD IN S
S-Video output
Better
C
DVD IN V
⇐
⇐
⇐
⇐
⇐
⇐
Composite video output
Standard
a
DVD IN FRONT L/R
b
DIGITAL IN COAXIAL 1
c
DIGITAL IN OPTICAL 1
IN 3
HDMI
IN 2
Analog audio L/R output
Digital coaxial output
Digital optical output
IN 1
OUT
SURR BACK SPEAKERS
Bi-AMP for FRONT SPEAKERS
ASSIGNABLE
L
b
DIGITAL IN
COMPONENT VIDEO
Y
SIRIUS
DOCK
1
AM
(DVD)
COAXIAL
c
VCR/DVR
CBL/SAT
CB/ PB
2
(CBL/SAT)
DVD
MONITOR
OUT
V
V
S
S
R
CR/ PR
1
(VCR/DVR)
OPTICAL
IN 2
IN 1(DVD)
OUT
ASSIGNABLE
2
(CD)
IN
IN
OUT
IN
OUT
IN
IN
IN
OUT
IN
FRONT
C
ANTENNA
FM
75
B
SURR
ZONE 2
LINE OUT
CENTER SURR BACK
PRE OUT
ASSIGNABLE
A
L
L
R
R
L
R
REMOTE
CONTROL
CD
CBL/SAT
TAPE
L
COAXIAL
OUT
OPTICAL
OUT
Connect one or the other
Connection c must be
assigned (see page 46)
Y
PB
PR
COMPONENT VIDEO OUT
DVD
VCR/DVR
L
a
R
SUB
WOOFER
R
AUDIO
OUT
S VIDEO
OUT
VIDEO
OUT
DVD player
To connect a DVD player or DVD-Audio/SACD-capable player with a
multichannel analog audio output, see page 31.
30
SUB
WOOFER
Connecting Your Components—Continued
Hooking Up the Multichannel Input
If your DVD player supports multichannel audio formats such as DVD-Audio and SACD, and it has a multichannel
analog audio output, you can connect it to the AV receiver’s multichannel input.
Use a multichannel analog audio cable, or several normal audio cables, to connect the AV receiver’s DVD IN FRONT
L/R, CENTER, SURR L/R, SURR BACK L/R, and SUBWOOFER jacks to the 7.1-channel analog audio output on your
DVD player. If your DVD player has a 5.1-channel analog audio output, don’t connect anything to the AV receiver’s
SURR BACK L/R jacks.
To select the multichannel input, see “Basic AV Receiver Operation” on page 47. To adjust the subwoofer sensitivity for
the multichannel input, see “Using the Audio Adjust Settings” on page 74–75.
IN 3
HDMI
IN 2
IN 1
SURR BACK SPEAKERS
OUT
SURR SPEAKERS
Bi-AMP for FRONT SPEAKERS
ASSIGNABLE
FRONT SPEAKERS
L
DIGITAL IN
L
120V
COMPONENT VIDEO
Y
DOCK
1
AM
SIRIUS
(DVD)
COAXIAL
CBL/SAT
CB/ PB
2
VCR/DVR
MONITOR
OUT
DVD
V
(CBL/SAT)
CENTER SPEAKER
V
R
1
IN 2
IN 1(DVD)
OUT
ASSIGNABLE
2
(CD)
IN
IN
OUT
FM
75
S
S
(VCR/DVR)
IN
OUT
IN
IN
IN
OUT
IN
FRONT
SURR
R
ANTENNA
CR/ PR
OPTICAL
ZONE 2
LINE OUT
CENTER SURR BACK
PRE OUT
L
ASSIGNABLE
L
L
R
R
REMOTE
CONTROL
CD
TAPE
CBL/SAT
DVD
VCR/DVR
VOLTAGE
SELECTOR
220-240V
L
L
R
R
SUB
WOOFER
R
SUB
WOOFER
ZONE 2 SPEAKERS
7.1 ch
5.1 ch
FRONT
SURR
CENTER
SURR BACK
L
L
R
R
DVD
L
R
FRONT
L
SUB
WOOFER
R
SURROUND
L
CENTER
SUB
WOOFER
R
SURR
BACK
DVD player
31
Connecting Your Components—Continued
Connecting a VCR or DVR for Playback
With this hookup, you can use the tuner in your VCR or DVR to listen to your favorite TV programs
via the AV receiver, which is useful if your TV has no audio outputs.
Hint!
Step 1: Video Connection
Choose a video connection that matches your VCR or DVR ( A , B , or C ), and then make the connection. You must
connect the AV receiver to your TV with the same type of connection.
Step 2: Audio Connection
Choose an audio connection that matches your VCR or DVR ( a , b , or c ), and then make the connection.
• To enjoy Dolby Digital and DTS, use connection b or c .
Connection
AV receiver
Signal flow
VCR or DVR
Picture quality
A
COMPONENT VIDEO IN 2
Best
B
VCR/DVR IN S
S-Video output
Better
C
VCR/DVR IN V
Composite video output
Standard
a
VCR/DVR IN L/R
b
DIGITAL IN COAXIAL 2
c
DIGITAL IN OPTICAL 1
⇐
⇐
⇐
⇐
⇐
⇐
Component video output
IN 2
IN 3
HDMI
Analog audio L/R output
Digital coaxial output
Digital optical output
IN 1
SURR BACK SPEAKERS
OUT
Bi-AMP for FRONT SPEAKERS
ASSIGNABLE
DIGITAL IN
L
COMPONENT VIDEO
Y
SIRIUS
DOCK
1
AM
(DVD)
b
COAXIAL
VCR/DVR
CBL/SAT
CB/ PB
2
(CBL/SAT)
DVD
MONITOR
OUT
C
V
V
S
S
R
ANTENNA
CR/ PR
1
(VCR/DVR)
c
OPTICAL
IN 2
IN 1(DVD)
OUT
ASSIGNABLE
2
(CD)
IN
IN
OUT
IN
OUT
IN
IN
IN
OUT
IN
FRONT
FM
75
B
SURR
ZONE 2
LINE OUT
CENTER SURR BACK
PRE O
ASSIGNABLE
L
L
R
R
REMOTE
CONTROL
A
CD
CBL/SAT
TAPE
L
COAXIAL
OUT
OPTICAL
OUT
Y
PB
PR
COMPONENT VIDEO OUT
R
AUDIO
OUT
S VIDEO
OUT
Connect one or the other
Connection b must be
assigned (see page 46)
VCR or DVR
32
DVD
VCR/DVR
VIDEO
OUT
SUB
WOOFER
a
L
L
R
R
SUB
WOOF
Connecting Your Components—Continued
Connecting a VCR or DVR for Recording
Step 1: Video Connection
Choose a video connection that matches your VCR or DVR ( A or B ), and then make the connection. The video
source to be recorded must be connected to the AV receiver via the same type of connection.
Step 2: Audio Connection
Make the audio connection a .
Connection
AV receiver
Signal flow
VCR or DVD recorder
Picture quality
A
VCR/DVR OUT S
S-Video input
Better
B
VCR/DVR OUT V
Composite video input
Standard
a
VCR/DVR OUT L/R
⇒
⇒
⇒
IN 3
HDMI
IN 2
IN 1
Audio L/R input
OUT
SURR BACK SPEAKERS
Bi-AMP for FRONT SPEAKERS
ASSIGNABLE
SURR
L
DIGITAL IN
COMPONENT VIDEO
Y
SIRIUS
DOCK
1
AM
(DVD)
COAXIAL
CBL/SAT
CB/ PB
2
(CBL/SAT)
VCR/DVR
DVD
MONITOR
OUT
B
V
V
S
S
R
ANTENNA
CR/ PR
1
(VCR/DVR)
OPTICAL
IN 2
IN 1(DVD)
OUT
ASSIGNABLE
2
(CD)
IN
IN
OUT
IN
OUT
IN
IN
IN
OUT
IN
FRONT
FM
75
A
SURR
ZONE 2
LINE OUT
CENTER SURR BACK
PRE OUT
ASSIGNABLE
L
L
R
R
REMOTE
CONTROL
CD
CBL/SAT
TAPE
L
VCR/DVR
DVD
SUB
WOOFER
L
L
R
R
SUB
WOOFER
a
R
AUDIO
IN
S VIDEO
IN
VIDEO
IN
VCR or DVR
Notes:
• The AV receiver must be turned on for recording. Recording is not possible while it’s on Standby.
• If you want to record directly from your TV or another video source without going through the AV receiver, connect
the audio and video outputs from your TV or other video component directly to the recording VCR/DVR’s audio and
video inputs. See the manuals supplied with your TV or VCR/DVR for details.
• Video signals connected to composite video inputs can only be recorded via the VCR/DVR OUT V jack. So if your
source TV or VCR is connected to a composite video input, the recording VCR/DVR must be connected to the
VCR/DVR OUT V jack. Likewise, video signals connected to S-Video inputs can only be recorded via the VCR/DVR
OUT S jack. So if your source TV or VCR is connected to an S-Video input, the recording VCR/DVR must be
connected to the VCR/DVR OUT S jack.
33
Connecting Your Components—Continued
Connecting a Satellite, Cable, or Terrestrial Set-top box or Other Video Source
With this hookup, you can use your satellite or cable receiver to listen to your favorite TV programs
via the AV receiver, which is useful if your TV has no audio outputs.
Hint!
Step 1: Video Connection
Choose a video connection that matches the video source ( A , B , or C ), and then make the connection.
You must connect the AV receiver to your TV with the same type of connection.
Step 2: Audio Connection
Choose an audio connection that matches the video source ( a , b , or c ), and then make the connection.
• To enjoy Dolby Digital and DTS, use connection b or c .
Connection
AV receiver
Signal flow
Video source
Picture quality
A
COMPONENT VIDEO IN 2
Component video output
Best
B
CBL/SAT IN S
S-Video output
Better
C
CBL/SAT IN V
⇐
⇐
⇐
⇐
⇐
⇐
Composite video output
Standard
a
CBL/SAT IN L/R
b
DIGITAL IN COAXIAL 2
c
DIGITAL IN OPTICAL 1
IN 3
HDMI
Analog audio L/R output
Digital coaxial output
Digital optical output
IN 2
IN 1
SURR BACK SPEAKERS
OUT
Bi-AMP for FRONT SPEAKERS
ASSIGNABLE
L
DIGITAL IN
COMPONENT VIDEO
Y
SIRIUS
DOCK
1
AM
(DVD)
b
COAXIAL
CBL/SAT
CB/ PB
2
(CBL/SAT)
VCR/DVR
DVD
MONITOR
OUT
C
V
V
S
S
R
ANTENNA
CR/ PR
1
(VCR/DVR)
c
OPTICAL
IN 2
IN 1(DVD)
OUT
ASSIGNABLE
2
(CD)
IN
IN
OUT
IN
OUT
IN
IN
IN
OUT
IN
FRONT
FM
75
B
SURR
ZONE 2
LINE OUT
CENTER SURR BACK
PRE OU
ASSIGNABLE
A
L
L
R
R
REMOTE
CONTROL
CD
CBL/SAT
TAPE
L
COAXIAL
OUT
Connect one or the other
Connection c must be
assigned (see page 46)
34
OPTICAL
OUT
Y
PB
PR
COMPONENT VIDEO OUT
DVD
VCR/DVR
R
AUDIO
OUT
S VIDEO
OUT
VIDEO
OUT
Satellite, cable, set-top box, etc.
SUB
WOOFER
a
L
L
R
R
SUB
WOOFE
Connecting Your Components—Continued
Connecting Components with HDMI
About HDMI
Designed to meet the increased demands of digital TV, HDMI (High Definition Multimedia Interface) is a new digital
interface standard for connecting TVs, projectors, DVD players, set-top boxes, and other video components. Until now,
several separate video and audio cables have been required to connect AV components. With HDMI, a single cable can
carry control signals, digital video, and up to eight channels of digital audio (2-channel PCM, multichannel digital
audio, or multichannel PCM).
The HDMI video stream (i.e., video signal) is compatible with DVI (Digital Visual Interface),*1 so TVs and displays
with a DVI input can be connected by using an HDMI-to-DVI adapter cable. (This may not work with some TVs and
displays, resulting in no picture.)
The AV receiver uses HDCP (High-bandwidth Digital Content Protection), so only HDCP-compatible components will
display a picture.
The AV receiver’s HDMI interface is based on the following standard:
HT-R560:
Pass-thru
About Copyright Protection
The AV receiver supports HDCP (High-bandwidth Digital Content Protection),*2 a copy-protection system for digital
video signals. Other devices connected to the AV receiver via HDMI must also support HDCP.
Use a commercially available HDMI cable (supplied with some components) to connect the AV receiver’s HDMI OUT
to the HDMI input on your TV or projector.
*1 DVI (Digital Visual Interface): The digital display interface standard set by the DDWG*3 in 1999.
*2 HDCP (High-bandwidth Digital Content Protection): The video encryption technology developed by Intel for HDMI/DVI. It’s designed to
protect video content and requires a HDCP-compatible device to display the encrypted video.
*3 DDWG (Digital Display Working Group): Led by Intel, Compaq, Fujitsu, Hewlett Packard, IBM, NEC, and Silicon Image, this open
industry group’s objective is to address the industry's requirements for a digital connectivity specification for high-performance PCs and
digital displays.
35
Connecting Your Components—Continued
Making HDMI Connections
If you have an HDMI-compatible player, you can connect it to the AV receiver with an HDMI cable.
Step 1: Connect your HDMI-compatible TV to the AV receiver’s HDMI OUT jack.
Step 2: Connect your HDMI-compatible player to the AV receiver’s HDMI IN 1, 2, or 3 jack.
Step 3: Connect your HDMI-compatible player to an analog and/or digital audio input on the AV
receiver.
Step 4: Assign the HDMI IN.
Turn on the AV receiver, and then assign the HDMI IN (see page 44).
■ Audio Signals
• Audio and video signals received via inputs other than the HDMI IN jacks are not output by the HDMI OUT.
• Audio and video signals received via the HDMI IN jacks are output only by the HDMI OUT.
• To watch an HDMI source that’s connected via the AV receiver’s HDMI jacks, the AV receiver must be turned
on, otherwise no HDMI signal will be output.
• If you want to listen through the speakers connected to the AV receiver, in addition to an HDMI connection,
you’ll also need to make a separate analog or digital audio connection.
HDMI
OUT
HDMI
IN
TV
Step 2
Step 1
DVD player
IN 1
Step 3 ✽
HDMI
ASSIGNABLE
IN 3
HDMI
IN 2
IN 1
OUT
ASSIGNABLE
DIGITAL IN
COMPONENT VIDEO
Y
SIRIUS
DOCK
1
AM
(DVD)
COAXIAL
CBL/SAT
CB/ PB
2
(CBL/SAT)
VCR/DVR
DVD
MONITOR
OUT
V
V
S
S
ANTENNA
CR/ PR
1
(VCR/DVR)
OPTICAL
IN 2
IN 1(DVD)
OUT
ASSIGNABLE
2
(CD)
IN
IN
OUT
IN
OUT
IN
IN
IN
OUT
IN
FRONT
SURR
FM
75
Tip!
If you make the connection described in
step 3, to fully enjoy the AV receiver's listening modes, turn down the volume on
your TV all the way so that its speakers
output no sound.
CENTER SURR BACK
ASSIGNABLE
L
L
L
R
R
R
REMOTE
CONTROL
Connect one
or the other
CD
TAPE
CBL/SAT
VCR/DVR
DVD
Sound off
SUB
WOOFER
Notes:
• The HDMI video stream is compatible with DVI (Digital Visual Interface), so TVs and displays with a DVI input can
be connected by using an HDMI-to-DVI adapter cable. (Note that DVI connections only carry video, so you’ll need
to make a separate connection for audio.) However, reliable operation with such an adapter is not guaranteed. In
addition, video signals from a PC are not supported.
• When listening to an HDMI component through the AV receiver, set the HDMI component so that its video can be
seen on the TV screen (on the TV, select the input of the HDMI component connected to the AV receiver). If the TV
power is off or the TV is set to another input source, this may result in no sound from the AV receiver or the sound
may be cut off.
• The HDMI audio signal (sampling rate, bit length, etc.) may be restricted by the connected source component. If the
picture is poor or there’s no sound from a component connected via HDMI, check its setup. Refer to the connected
component’s instruction manual for details.
36
Connecting Your Components—Continued
Connecting a Camcorder, Game Console, or Other Device
Step 1: Make the video connection A .
Step 2: Make the audio connection a .
a
MASTER VOLUME
TUNING
PRESET
AUX INPUT
L AUDIO R
ENTER
SETUP
L AUDIO R
OUT
RETURN
AUX INPUT
SETUP MIC
L
VIDEO
AUDIO
A
R
AUX INPUT
VIDEO
VIDEO OUT
Camcorder, game console, etc.
Connection
AV receiver
A
AUX INPUT VIDEO
a
AUX INPUT L-AUDIO-R
Signal flow
Camcorder or console
⇐
⇐
Composite video output
Analog audio L/R output
Connecting the Supplied DS-A1L Dock
IN 3
HDMI
IN 2
IN 1
OUT
ASSIGNABLE
DIGITAL IN
COMPONENT VIDEO
Y
SIRIUS
DOCK
1
AM
(DVD)
COAXIAL
CBL/SAT
CB/ PB
2
VCR/DVR
DVD
DOCK
MONITOR
OUT
V
(CBL/SAT)
V
CR/ PR
1
S
(VCR/DVR)
OPTICAL
S
IN 2
IN 1(DVD)
OUT
ASSIGNABLE
2
ANTENNA
(CD)
IN
IN
OUT
IN
OUT
IN
IN
IN
OUT
IN
FRONT
SURR
FM
75
CENTER SURR BACK
ASSIGNABLE
L
L
L
R
R
R
REMOTE
CONTROL
CD
TAPE
CBL/SAT
VCR/DVR
DVD
SUB
WOOFER
Notes:
• To connect an RI dock other than the DS-A1L, refer to its instruction manual.
• While your iPod is seated in the Dock, its battery will be charged when the AV receiver is set to On or Standby.
37
Connecting Your Components—Continued
Connecting a CD Player or Turntable
■ CD Player or Turntable (MM) with Built-in Phono Preamp
Step 1:
Choose a connection that matches your CD player ( a , b , or c ). Use connection a for a turntable with a built-in
phono preamp.
b
COAXIAL
IN 3
HDMI
IN 2
IN 1
IN
COMPONENT VIDEO
Y
(CBL/SAT)
DOCK
1
CBL/SAT
CB/ PB
2
VCR/DVR
MONITOR
OUT
DVD
V
ANTENNA
R
CR/ PR
1
OPTICAL
S
IN 2
2
(CD)
(CD)
OUT
IN 1(DVD)
ASSIGNABLE
IN
IN
OUT
AUDIO
OUTPUT
CD
IN
OUT
IN
IN
IN
OUT
IN
FRONT
SURR
CENTER SURR BACK
ASSIGNABLE
IN
R
FM
75
S
(VCR/DVR)
OPTICAL
2
L
V
(CBL/SAT)
c
AM
L
(DVD)
COAXIAL
Connect one
or the other
Connection b
must be
assigned (see
page 46)
OUT
ASSIGNABLE
DIGITAL IN
2
L
L
R
R
a
L
L
R
REMOTE
CONTROL
CD
CBL/SAT
TAPE
DVD
VCR/DVR
SUB
WOOFER
R
CD
COAXIAL
OUT
a
L
OPTICAL
OUT
R
AUDIO
OUT
Turntable (MM) with
built-in phono preamp
CD player
• To connect the CD player digitally, use connection b or c .
Connection
AV receiver
Signal flow
a
CD IN L/R
b
DIGITAL IN COAXIAL 2
c
DIGITAL IN OPTICAL 2
■ Turntable (MM) with no Phono Preamp Built-in
A phono preamp is necessary to connect a turntable that
doesn’t have a phono preamp built-in.
IN 3
HDMI
IN 2
IN 1
Analog audio L/R output
Digital coaxial output
Digital optical output
■ Turntable with an MC (Moving Coil) Cartridge
An MC head amp and phono preamp are necessary to
connect a turntable with an MC (Moving Coil) cartridge.
OUT
COAXIAL
CBL/SAT
CB/ PB
2
AM
OUT
VCR/DVR
DVD
MONITOR
OUT
COAXIAL
V
IN
IN
IN
IN
OUT
OUT
OUT
IN
V
FM
75
IN
1
FRONT
IN
R
TAPE
CBL/SAT
VCR/DVR
AUDIO
OUTPUT
L
L
DVD
SUB
WOOFER
IN
IN
IN
OUT
IN
FRONT
FM
75
SURR
CENTER SURR BACK
L
L
R
R
R
CD
Phono preamp
IN
L
TAPE
CBL/SAT
VCR/DVR
DVD
SUB
WOOFER
AUDIO
INPUT
AUDIO
OUTPUT
AUDIO
OUTPUT
L
L
R
R
L
R
R
CD
CD
AUDIO
OUTPUT
OUT
REMOTE
CONTROL
R
R
IN
OUT
IN
L
R
REMOTE
CONTROL
OUT
ASSIGNABLE
L
CD
IN 1(DVD)
(CD)
CENTER SURR BACK
L
R
S
IN 2
ASSIGNABLE
2
SURR
ANTENNA
S
(VCR/DVR)
OPTICAL
IN
ASSIGNABLE
L
MONITOR
OUT
CR/ PR
OUT
ASSIGNABLE
(CD)
DVD
ANTENNA
S
IN 1(DVD)
AM
VCR/DVR
V
(CBL/SAT)
S
IN 2
CBL/SAT
CB/ PB
2
CR/ PR
1
DOCK
1
(DVD)
V
(VCR/DVR)
38
IN 1
COMPONENT VIDEO
Y
DOCK
(CBL/SAT)
IN
IN 2
ASSIGNABLE
DIGITAL IN
Y
2
IN 3
HDMI
ASSIGNABLE
1
(DVD)
OPTICAL
CD or turntable
⇐
⇐
⇐
Phono
preamp
MC head amp or
MC transformer
AUDIO
INPUT
L
L
R
R
AUDIO
OUTPUT
AUDIO
INPUT
L
L
R
R
Connecting Your Components—Continued
Connecting a Cassette, CDR, MiniDisc, or DAT Recorder
Step 1:
Choose a connection that matches your recorder ( a , b , or c ), and then make the connection.
b
COAXIAL
IN 3
HDMI
IN 2
IN 1
L
COMPONENT VIDEO
Y
2
(CBL/SAT)
AM
SIRIUS
DOCK
1
(DVD)
COAXIAL
CBL/SAT
CB/ PB
2
(CBL/SAT)
c
VCR/DVR
DVD
R
MONITOR
OUT
V
V
S
S
1
(VCR/DVR)
OPTICAL
2
(CD)
IN 2
IN 1(DVD)
OUT
ASSIGNABLE
2
(CD)
IN
IN
OUT
IN
OUT
IN
IN
IN
OUT
IN
FRONT
TAPE
ANTENNA
CR/ PR
OPTICAL
a
IN
OUT
ASSIGNABLE
DIGITAL IN
FM
75
a
SURR
CENTER SURR BACK
L
ASSIGNABLE
L
L
L
R
R
R
R
REMOTE
CONTROL
CD
Connect one or the other
These connections must be
assigned (see page 46)
CBL/SAT
TAPE
L
COAXIAL
OUT
OPTICAL
OUT
DVD
VCR/DVR
R
SUB
WOOFER
L
AUDIO
IN
TAPE
R
AUDIO
OUT
Cassette, CDR, MD, etc.
• To connect the recorder digitally for playback, use connections a and b , or a and c .
Connection
AV receiver
a
TAPE IN L/R
TAPE OUT L/R
b
DIGITAL IN COAXIAL 2
c
DIGITAL IN OPTICAL 2
Signal flow
⇐
⇒
⇐
⇐
Cassette, CDR, MD, or DAT recorder
Analog audio L/R output
Analog audio L/R input
Digital coaxial output
Digital optical output
39
Connecting Your Components—Continued
Connecting Onkyo
Components
Step 1: Make sure that each Onkyo component is connected to the AV receiver with an analog audio cable (RCA).
Step 2: Make the necessary
connections (see illustration below).
Step 3: If you’re using an MD or CDR component, change the Input Display (see page 46).
With
(Remote Interactive), you can use the following special functions:
Auto Power On/Standby
When you start playback on a component connected via
, if the AV receiver is on Standby, it will automatically turn
on and select that component as the input source. Similarly, when the AV receiver is set to Standby, all components
connected via
will also go on Standby. This function will not work with components that are connected to an AC
OUTLET on the AV receiver.
Direct Change
When playback is started on a component connected via
, the AV receiver automatically selects that component as
the input source. If your DVD player is connected to the AV receiver’s DVD IN (multichannel input), you’ll need to
press the [MULTI CH] button repeatedly and select Multich to hear all channels (see page 47), as the Direct Change
function selects the DVD IN FRONT L/R jacks.
Remote Control
You can use the AV receiver’s remote controller to control your other
-capable Onkyo components. You must enter
the appropriate remote control code first (see page 83). And remember to point the remote controller at the AV receiver
and not the other component.
Notes:
• Use only
cables for
connections.
cables
are supplied with Onkyo players (DVD, CD, etc.).
• Some components have two
jacks. You can connect either one to the AV receiver. The other jack is
for connecting additional
-capable components.
• Connect only Onkyo components to
jacks. Connecting other manufacturer’s components may cause
a malfunction.
• Some components may not support all
functions.
Refer to the manuals supplied with your other Onkyo
components.
IN
IN 3
HDMI
IN 2
IN 1
L
OUT
ASSIGNABLE
DIGITAL IN
COMPONENT VIDEO
Y
SIRIUS
DOCK
1
AM
(DVD)
COAXIAL
CBL/SAT
CB/ PB
2
VCR/DVR
DVD
V
CR/ PR
1
IN 1(DVD)
OUT
(CD)
IN
IN
OUT
IN
OUT
IN
IN
IN
OUT
IN
FRONT
SURR
CENTER SURR BACK
FRONT
ASSIGNABLE
L
L
R
R
CD
FM
75
S
IN 2
ASSIGNABLE
2
ANTENNA
S
(VCR/DVR)
OPTICAL
R
MONITOR
OUT
V
(CBL/SAT)
L
REMOTE
CONTROL
L
R
REMOTE
CONTROL
CD
TAPE
CBL/SAT
VCR/DVR
DVD
SUB
WOOFER
R
DVD
e.g., CD player
R
L
ANALOG
AUDIO OUT
e.g., DVD player
R
L
ANALOG
AUDIO OUT
Connecting the Power Cord
• Before connecting the power cord, connect all your speakers and AV components.
• Plug the end of the power cord into a suitable wall outlet.
• Turning on the AV receiver may cause a momentary power surge that might interfere with other electrical equipment
on the same circuit. If this is a problem, plug the AV receiver into a different branch circuit.
40
Turning On the AV Receiver
ON/STANDBY
ON/STANDBY
STANDBY indicator
MASTER VOLUME
TUNING
ON/STANDBY
RECEIVER
PRESET
STANDBY
ENTER
DOCK
MULTI CH
DVD
VCR/DVR
CBL/SAT
AUX
TAPE
TUNER
CD
SETUP
RETURN
AUX INPUT
PHONES
SETUP MIC
A SPEAKERS B
TONE
MOVIE/TV
MUSIC
GAME
DISPLAY DIGITAL INPUT
VIDEO
L
AUDIO
R
RT/PTY/TP MEMORY TUNING MODE
CLEAR
AV RECEIVER
HT-R560
Turning On and Standby
Remote
controller
AV receiver
ON/STANDBY
or
On the AV receiver, press the [ON/STANDBY] button.
On the remote controller, press the [RECEIVER] REMOTE MODE button,
followed by the [ON/STANDBY] button.
The AV receiver comes on, the display lights up, and the STANDBY indicator goes off.
To turn the AV receiver off, press the [ON/STANDBY] button, or press the remote
controller’s [ON/STANDBY] button. The AV receiver will enter Standby mode. To
prevent any loud surprises the next time you turn on the AV receiver, turn down the
volume before you turn it off.
Up and Running in a Few Easy Steps
To get your system up and running with the minimum of fuss, here’s a few pointers to help you configure the AV
receiver before you use it for the very first time. These settings only need to be made once.
■ Do the automatic speaker setup—this is essential!
See “Automatic Speaker Setup (Audyssey 2EQ)” on page 42.
■ Did you connect a component to an HDMI input,
component video input, or digital audio input?
If you did, see “HDMI Input Setup” on page 44, “Component Video
Input Setup” on page 45, or “Digital Input Setup” on page 46 respectively.
■ Did you connect an Onkyo MD recorder or CD recorder?
If you did, see “Changing the Input Display” on page 46.
Y
HDMI
OUT
TAPE
PB
COAXIAL
PR
OPTICAL
IN
MD recorder, CD recorder
41
First Time Setup
This section explains the settings that you need to make before using the AV receiver for the very first time.
Using Audyssey 2EQ
Automatic Speaker Setup
(Audyssey 2EQ)
With the supplied calibrated microphone, Audyssey 2EQ
automatically determines the number of speakers connected, their size for purposes of bass management,
optimum crossover frequencies to the subwoofer (if
present), and distances from the primary listening position. Audyssey 2EQ then removes the distortion caused
by room acoustics by capturing room acoustical problems over the listening area in both the frequency and
time domain. The result is clear, well-balanced sound for
everyone. Enabling Audyssey 2EQ allows you to also
use Audyssey Dynamic EQ, which maintains the proper
octave-to-octave balance at any volume level. (See
page 76)
Notes:
• If the AV receiver is muted, it will be unmuted
automatically when the automatic speaker setup
starts.
• Automatic speaker setup cannot be performed
while a pair of headphones is connected.
• It takes about 10 minutes to complete the automatic speaker setup for three positions. Total measurement time varies depending on the speakers.
• Do not connect or disconnect any speakers during
the automatic speaker setup.
1
Measurement Positions
MASTER VOLUME
To create a listening environment in which several
people can enjoy your home theater simultaneously,
Audyssey 2EQ takes measurements at three positions
within the listening area.
TUNING
ON/STANDBY
PRESET
STANDBY
ENTER
DOCK
MULTI CH
DVD
VCR/DVR
CBL/SAT
AUX
TAPE
TUNER
CD
SETUP
RETURN
AUX INPUT
PHONES
SETUP MIC
A SPEAKERS B
TONE
MOVIE/TV
MUSIC
GAME
DISPLAY DIGITAL INPUT
VIDEO
L
AUDIO
R
RT/PTY/TP MEMORY TUNING MODE
CLEAR
A First measurement point
AV RECEIVER
This is the center point of the listening area, or the
listening position.
2, 6
B Second measurement point
HT-R560
SETUP MIC
The right side of the listening area.
C Third measurement point
The left side of the listening area.
The distances between points 1 and 2 and points 1
and 3 must be at least 1 meter.
From the examples below, choose the listening area that
best matches yours and place the microphone accordingly when prompted.
TV
TV
TV
TV
TV
TV
TV
TV
TV
: Listening area
: Listening position
42
1
Turn on the AV receiver.
2
SETUP MIC
Put the speaker setup microphone at measurement point 1
(see left), and connect it to the
SETUP MIC jack.
Notes:
• For all measurements, the microphone capsule should
point directly at the ceiling.
• If there’s an obstacle between the microphone and any
speaker, the automatic setup will not work correctly.
Set up the room as you would when enjoying a DVD.
• Positioning the microphone close to where your ears
would normally be will provide better results. You can
adjust the height of the microphone by using a tripod
or level table.
• Do not attempt to hold the microphone in your hand
during measurements as this will produce incorrect
results.
First Time Setup—Continued
3
Press [ENTER].
The automatic speaker setup starts.
You can cancel the automatic speaker setup at
any point in this procedure simply by disconnecting the setup microphone.
A test tone is output by each speaker in turn, as
the Audyssey 2EQ function determines which
speakers are connected. This takes a few minutes.
Note:
• Quiet the room as much as possible. Background noise can disrupt the room measurements. Close windows, silence cell phones,
televisions, radios, air conditioners, fluorescent lights, home appliances, light dimmers,
or other devices, and refrain from talking.
4
When the following display appears,
move the speaker setup microphone to
measurement point 2 (page 42), and
then press [ENTER].
Error Messages
While the automatic speaker setup is in progress, one of
the following error messages may appear:
Ambient noise is too high
This message appears if there’s too much background
noise and the measurements cannot be performed properly. Remove the source of the noise and try again.
Speaker Detect Errors
This message appears if one of the speaker-related errors
below occurs.
• One of the front speakers has not been detected.
• One of the surround speakers has not been detected.
• The surround back speakers have been detected but
the surround speakers haven’t.
• The right surround back speaker has been detected but
the left surround back speaker hasn’t.
• The number of speakers detected on the second or
third measurement was different to the number
detected on the first measurement.
Write Error
Audyssey 2EQ performs more measurements.
This takes a few minutes.
5
6
When the following display appears,
move the speaker setup microphone to
measurement point 3 (page 42), and
then press [ENTER].
This message appears if saving fails.
❑ Matching Error
This message appears if a speaker that was detected
during the 1st measurement is not detected during the
2nd or 3rd measurements. If this message appears, check
your speaker connections, and then try again.
Audyssey 2EQ performs more measurements.
This takes a few minutes.
To Retry the Automatic Speaker Setup
When the measurements are complete, the
results are calculated and saved automatically.
Press the [ENTER] button.
Make sure speakers that cannot be
detected are connected properly.
When the automatic speaker setup is
complete, disconnect the speaker setup
microphone.
Changing the Speaker Settings Manually
If you wish to make changes to the settings found during
the automatic speaker setup, follow the directions on
pages 77–81.
Note:
• When the automatic speaker setup is complete, the
Equalizer Settings (page 81) will be set to “Audyssey.”
43
First Time Setup—Continued
Using a Powered Subwoofer
If you’re using a powered subwoofer, as it outputs very
low-frequency sound and its position is usually low down,
it may not be detected by the automatic speaker setup. In
this case, increase the subwoofer’s volume, select its
highest crossover frequency, and then try running the
automatic speaker setup again. Note that if the volume is
set too high and the sound distorts, it may not be detected,
so use an appropriate volume level.
HDMI Input Setup
2
Use the Up and Down [ ]/[ ]
buttons to select “1.HDMI Input,”
and then press [ENTER].
3
Use the Up and Down [ ]/[ ]
buttons to select an input selector, and use the Left and Right
[ ]/[ ] buttons to select:
IN1: Select if the video component
is connected to HDMI IN 1.
IN2: Select if the video component
is connected to HDMI IN 2.
IN3: Select if the video component
is connected to HDMI IN 3.
No: Select if you’re not using the
HDMI OUT.
4
Press the [SETUP] button.
Setup closes.
If you connect a video component to an HDMI IN, you
must assign that input to an input selector. For example,
if you connect your DVD player to HDMI IN 1, you
must assign HDMI IN 1 to the DVD input selector.
By default, none of the HDMI inputs are assigned. The
following input selectors can be assigned: DVD,
VCR/DVR, CBL/SAT, AUX.
RECEIVER
ENTER
Note:
• This procedure can also be performed on the AV
receiver by using its [SETUP], [ENTER], and arrow
buttons.
SETUP
1
44
Press the [RECEIVER] button,
followed by the [SETUP] button.
First Time Setup—Continued
Component Video Input Setup
If you connect a video component to a COMPONENT
VIDEO IN, you must assign that input to an input
selector. For example, if you connect your DVD player
to COMPONENT VIDEO IN 2, you must assign COMPONENT VIDEO IN 2 to the DVD input selector.
By default, the DVD input selector is assigned to COMPONENT VIDEO IN 1, and all of the other input selectors (i.e., VCR/DVR, CBL/SAT, AUX) are assigned to
the “- - -” option.
1
Press the [RECEIVER] button,
followed by the [SETUP] button.
2
Use the Up and Down [ ]/[ ]
buttons to select “2.Component,”
and then press [ENTER].
3
Use the Up and Down [ ]/[ ]
buttons to select an input selector, and use the Left and Right
[ ]/[ ] buttons to select:
IN1: Select if the video component
is connected to COMPONENT VIDEO IN 1.
IN2: Select if the video component
is connected to COMPONENT VIDEO IN 2.
No: Select if you’re not using the
COMPONENT VIDEO
OUT.
4
Press the [SETUP] button.
Setup closes.
Note:
• This procedure can also be performed on the AV
receiver by using its [SETUP], [ENTER], and arrow
buttons.
45
First Time Setup—Continued
Digital Input Setup
OPT2: Select if the component is
connected to DIGITAL IN
OPTICAL 2.
- - -: Select if the component is
connected to an analog
input.
MASTER VOLUME
TUNING
ON/STANDBY
PRESET
STANDBY
ENTER
DOCK
DVD
MULTI CH
VCR/DVR
CBL/SAT
AUX
TAPE
TUNER
CD
SETUP
RETURN
AUX INPUT
PHONES
SETUP MIC
TONE
A SPEAKERS B
MOVIE/TV
MUSIC
GAME
DISPLAY DIGITAL INPUT
VIDEO
L
AUDIO
R
RT/PTY/TP MEMORY TUNING MODE
CLEAR
AV RECEIVER
1
HT-R560
2, 3
If you connect a component to a digital audio input, you
must assign that input to an input selector. For example,
if you connect your CD player to OPTICAL IN 1, you
must assign OPTICAL IN 1 to the CD input selector.
Note:
• This procedure can also be performed on the AV
receiver by using its [SETUP], [ENTER], and arrow
buttons.
Changing the Input Display
These are the default assignments.
Input selector
Audio input
DVD
COAX1
VCR/DVR
OPT1
CBL/SAT
COAX2
AUX
---
TAPE
---
CD
OPT2
If you connect an
-capable Onkyo MiniDisc recorder
or CD recorder to the TAPE IN/OUT jacks, or to the
CBL/SAT jacks, for
to work properly, you must
change this setting.
This setting can only be changed on the AV receiver.
1, 2
1, 2
MASTER VOLUME
TUNING
ON/STANDBY
PRESET
STANDBY
ENTER
1
DVD
AUX
VCR/DVR CBL/SAT
TAPE
TUNER
Press the input selector button
for the input selector that you
want to assign.
The TUNER and DOCK input selectors
cannot be assigned and are fixed at the
“- - -” option.
DOCK
VCR/DVR
CBL/SAT
AUX
TAPE
TUNER
CD
SETUP
RETURN
AUX INPUT
SETUP MIC
A SPEAKERS B
TONE
MOVIE/TV
MUSIC
GAME
DISPLAY DIGITAL INPUT
VIDEO
L
AUDIO
R
RT/PTY/TP MEMORY TUNING MODE
CLEAR
AV RECEIVER
1
TAPE
DIGITAL INPUT
DVD
PHONES
CD
2
MULTI CH
HT-R560
Press the [TAPE] or [CBL/SAT]
input selector button so that
“TAPE” or “CBL/SAT” appears on
the display.
or
Press the [DIGITAL INPUT]
button.
The current assignment is displayed.
CBL/SAT
DIGITAL INPUT
46
Press the [DIGITAL INPUT] button repeatedly to select an
option.
COAX1: Select if the component is
connected to DIGITAL IN
COAXIAL 1.
COAX2: Select if the component is
connected to DIGITAL IN
COAXIAL 2.
OPT1: Select if the component is
connected to DIGITAL IN
OPTICAL 1.
TAPE
or
Press and hold down the [TAPE]
or [CBL/SAT] input selector button (about 3 seconds) to change
the setting.
Repeat this step to select MD or CDR.
For the TAPE input selector, the setting
changes in this order:
CBL/SAT
TAPE → MD → CDR
→
3
2
Playing Your AV Components
Basic AV Receiver Operation
Subwoofer’s
rear panel
MASTER VOLUME
TUNING
ON/STANDBY
PRESET
1
3
STANDBY
ENTER
DOCK
MULTI CH
DVD
VCR/DVR
CBL/SAT
AUX
TAPE
TUNER
CD
SETUP
RETURN
AUX INPUT
PHONES
SETUP MIC
A SPEAKERS B
TONE
MOVIE/TV
MUSIC
GAME
DISPLAY DIGITAL INPUT
VIDEO
L
AUDIO
R
4
RT/PTY/TP MEMORY TUNING MODE
CLEAR
AV RECEIVER
HT-R560
MIN
1
1
Remote
controller
AV receiver
DVD
AUX
3
MAX
OUTPUT LEVEL
Use the AV receiver’s input selector buttons to select an input source.
To select an input source with the remote controller, press its INPUT
SELECTOR buttons.
VCR/DVR CBL/SAT
TAPE
To listen to a DVD player connected to the multichannel DVD input (page 31), press
the AV receiver’s [MULTI CH] button. The MULTI CH indicator will appear on the
display.
TUNER
CD
Note:
• While the multichannel DVD input is selected, the Speaker Configuration settings on
page 77 are ignored, and signals from the multichannel input are fed to the speakers
as they are.
2
AV receiver
Remote
controller
A SPEAKERS B
SP A / B
Use the SPEAKERS [A] and [B] buttons on the AV receiver or the [SP A/B]
button on the remote controller to select the speaker set that you want to
use.
Pressing the remote controller’s [SP A/B] button cycles through the following settings:
Speaker Set A → Speaker Set A&B → Speaker Set B → Off.
The A and B speaker indicators show whether each
speaker set is on or off.
Indicators
Note that when speaker set B is turned on, speaker
set A is reduced to 5.1-channel playback.
3
Start playback on the source component.
To watch a DVD or other video source, on your TV, select the video input that’s connected to the AV receiver’s COMPONENT VIDEO OUT, HDMI OUT, or MONITOR
OUT.
On some DVD players, you may need to change the digital or HDMI audio output
settings.
4
To adjust the volume, use the MASTER VOLUME control or the remote
controller’s [VOL] button.
Since the AV receiver is designed for home theaters, it has a wide volume range for
precise adjustment. The volume can be set to Min, 1 through 79, or Max.
AV receiver
MASTER VOLUME
Remote
controller
Note: When the subwoofer volume level is set to a positive (+) value, the maximum
master volume level is reduced proportionally.
To set the level of the subwoofer, use the OUTPUT LEVEL control.
Because our ears are less sensitive to very low bass sounds, there’s a temptation to set
the level of the subwoofer too high. As a rule of thumb, set the subwoofer level to what
you think is the optimal level, and then back it off slightly.
5
Select a listening mode and enjoy!
See “Using the Listening Modes” on page 67.
47
Common Functions
This section explains functions that can be used with any
input source.
Muting the AV Receiver
You can temporarily mute the output of the AV receiver.
DISPLAY
Press
[RECEIVER]
first
MUTING
Press the [RECEIVER] REMOTE
MODE button, and then press the
remote controller’s [MUTING]
button.
The output is muted and the MUTING
indicator flashes on the display.
To unmute the AV receiver, press the remote controller’s [MUTING] button again, or adjust the volume. The
output is unmuted and the MUTING indicator goes off.
Muting is cancelled when the AV receiver is set to
Standby.
Using the Sleep Timer
DIMMER
SLEEP
With the sleep timer, you can set the AV receiver so that
it turns off automatically after a specified period.
DISPLAY
MASTER VOLUME
TUNING
ON/STANDBY
PRESET
STANDBY
ENTER
DOCK
MULTI CH
DVD
VCR/DVR
CBL/SAT
AUX
TAPE
TUNER
CD
SETUP
RETURN
AUX INPUT
PHONES
SETUP MIC
A SPEAKERS B
TONE
MOVIE/TV
MUSIC
GAME
DISPLAY DIGITAL INPUT
DIMMER
VIDEO
L
AUDIO
R
MEMORY TUNING MODE
CLEAR
AV RECEIVER
PHONES
HT-R560
DIMMER
Press the [RECEIVER] REMOTE
MODE button, and then press the
remote controller’s [SLEEP] button repeatedly to select the
required sleep time.
You can set the sleep time from 90 to 10
minutes in 10 minute steps.
The SLEEP indicator appears on the
display when the sleep timer has been
set, as shown. The specified sleep time
appears on the display for about 5 seconds, then the previous display reappears.
SLEEP indicator
Setting the Display Brightness
You can adjust the brightness of the display.
Remote
controller
AV receiver
DIMMER
48
Press the [RECEIVER] REMOTE
MODE button, and then press the
remote controller’s [DIMMER]
button repeatedly to select: dim,
dimmer, or normal brightness.
You can also use the AV receiver’s
[DIMMER] button (not European models).
To cancel the sleep timer, press the [SLEEP] button
repeatedly until the SLEEP indicator disappears.
To check the remaining sleep time, press the [SLEEP]
button. Note that if you press the [SLEEP] button while
the sleep time is being displayed, you’ll shorten the sleep
time by 10 minutes.
Common Functions—Continued
7Using Headphones
Displaying Source Information
For private listening, you can connect a pair of stereo
headphones (1/4-inch phone plug) to the AV receiver’s
PHONES jack.
ON/STANDBY
STANDBY
DOCK
MULTI CH
You can display various information about the current
input source as follows.
Press the [RECEIVER] REMOTE
MODE button, and then press the
[DISPLAY] button repeatedly to
cycle through the available information.
PHONES
A SPEAKERS B
Notes:
• Always turn down the volume before connecting your
headphones.
• While the headphones plug is inserted in the PHONES
jack, the speakers are turned off.
• When you connect a pair of headphones, the listening
mode is set to Stereo, unless it was already set to Pure
Audio, Mono, Stereo, or Direct, in which case it stays
the same.
• When the multichannel DVD input is selected, only
the front left and front right channels can be heard in
the headphones.
Note:
• This procedure can also be performed on the AV
receiver by using its [DISPLAY] button.
The following information can typically be displayed:
Input source &
volume*1
Signal format*2
or sampling
frequency
Input source &
listening mode
*1 When AM or FM radio is used, the band, preset number, and frequency are displayed.
*2 If the input signal is analog, or AM or FM radio is
selected, no format information is displayed. If the
input signal is PCM, the sampling frequency is displayed. If the input signal is digital but not PCM, the
signal format is displayed. Information is displayed
for about 3 seconds, then the previous display reappears.
Interpreting Surround Channel Information
A
B C
A: The number of front channels (front left, front right,
and center).
B: The number of surround channels (surround left and
surround right). If there’s surround back channel
information, this number will be 3.
C: LFE channel for subwoofer (1 means yes).
49
Common Functions—Continued
Specifying the Digital Signal Format
The following table shows the display indicator for each
digital signal format.
Format
Display
Dolby Digital
DTS
PCM
PCM
Normally, the AV receiver detects the format of digital
input signals automatically. However, if you experience
either of the following issues when playing PCM or DTS
sources, you can specify the signal format manually.
• If the beginnings of tracks from a PCM source are cut
off, try the PCM setting.
• If noise is produced when fast forwarding or rewinding a DTS CD, try the DTS setting.
MASTER VOLUME
TUNING
ON/STANDBY
PRESET
STANDBY
ENTER
DOCK
MULTI CH
DVD
VCR/DVR
CBL/SAT
AUX
TAPE
TUNER
CD
SETUP
RETURN
AUX INPUT
PHONES
SETUP MIC
A SPEAKERS B
TONE
MOVIE/TV
MUSIC
GAME
DISPLAY DIGITAL INPUT
VIDEO
L
AUDIO
R
RT/PTY/TP MEMORY TUNING MODE
CLEAR
AV RECEIVER
HT-R560
DIGITAL INPUT
1
DIGITAL INPUT
2
DIGITAL INPUT
50
Press and hold the AV receiver’s
[DIGITAL INPUT] button for about
3 seconds.
While “Auto” is displayed (about
3 seconds), press the [DIGITAL
INPUT] button repeatedly to
select: PCM, DTS, or Auto.
PCM: Only 2-channel PCM format
input signals will be heard. If
the input signal is not PCM,
the PCM indicator will flash
and there will be no sound.
DTS: Only DTS (but not DTS-HD)
format input signals will be
heard. If the input signal is not
DTS, the DTS indicator will
flash and there will be no
sound.
Auto (default): The format is
detected automatically. If no
digital input signal is present,
the corresponding analog input
is used instead.
Listening to the Radio
AM Frequency Step Setup
(on some models)
3
Use the Up and Down [ ]/[ ]
buttons to select “AM Freq.”
4
Use the Left and Right [ ]/[ ]
buttons to select:
10kHz: Select if 10kHz steps are used
in your area.
9kHz: Select if 9kHz steps are used
in your area.
5
Press the [SETUP] button.
Setup closes.
1
2, 3
2–4
1, 5
Note:
• This procedure can also be performed on the AV
receiver by using its [SETUP], [ENTER], and arrow
buttons.
For AM tuning to work properly, you must specify the
AM frequency step used in your area. Note that when
this setting is changed, all radio presets are deleted.
1
Press the [RECEIVER] button,
followed by the [SETUP] button.
2
Use the Up and Down [ ]/[ ]
buttons to select “0.HardwareSetup,” and then press [ENTER].
51
Listening to the Radio—Continued
■ Manual Tuning Mode
Listening to AM/FM Stations
1
TUNING
TUNER
TUNING MODE
Press the [TUNING MODE] button
so that the AUTO indicator disappears from the display.
MASTER VOLUME
TUNING
ON/STANDBY
PRESET
STANDBY
ENTER
DOCK
MULTI CH
DVD
VCR/DVR
CBL/SAT
AUX
TAPE
TUNER
CD
SETUP
RETURN
AUX INPUT
PHONES
SETUP MIC
A SPEAKERS B
TONE
MOVIE/TV
MUSIC
GAME
DISPLAY DIGITAL INPUT
VIDEO
L
AUDIO
R
RT/PTY/TP MEMORY TUNING MODE
CLEAR
AV RECEIVER
HT-R560
2
TUNING
TUNING MODE
With the built-in tuner, you can enjoy AM and FM radio
stations and store your favorite stations as presets for
easy selection.
TUNER
Use the [TUNER] input selector
button to select AM or FM.
In this example, FM has been selected.
Band
■ Auto Tuning Mode
2
TUNING
Press the [TUNING MODE] button
so that the AUTO indicator
appears on the display.
Press the TUNING Up or Down
[ ]/[ ] button.
Searching stops when a station is
found.
When tuned into a station, the TUNED indicator
appears. When tuned into a stereo FM station, the FM
STEREO indicator also appears.
FM STEREO
AUTO
TUNED
52
Tuning into Weak FM Stereo Stations
If the signal from a stereo FM station is weak, it may be
impossible to get good reception. In this case, switch to
Manual Tuning mode and listen to the station in mono.
Note:
• You can also use the remote controller’s Up and Down
[ ]/[ ] buttons to tune the radio.
Tuning into AM/FM Radio Stations
TUNING MODE
Frequency changes in 0.05MHz steps for FM and 9kHz
(or 10kHz) steps for AM.
In Manual Tuning mode, FM stations will be in mono.
Frequency
(Actual display depends on country.)
1
Press and hold the TUNING Up or
Down [ ]/[ ] button.
The frequency stops changing when
you release the button.
Press the button repeatedly to change
the frequency one step at a time.
Listening to the Radio—Continued
■ Tuning into Stations by Frequency
You can tune into AM and FM stations directly by entering the appropriate frequency.
Displaying AM/FM Radio Information
DISPLAY
MASTER VOLUME
TUNING
ON/STANDBY
PRESET
STANDBY
ENTER
DOCK
TUNER
MULTI CH
DVD
VCR/DVR
CBL/SAT
AUX
TAPE
TUNER
CD
SETUP
RETURN
AUX INPUT
PHONES
SETUP MIC
VIDEO
L
AUDIO
R
NET/USB
A SPEAKERS B
TONE
MOVIE/TV
MUSIC
GAME
DISPLAY DIGITAL INPUT
RT/PTY/TP MEMORY TUNING MODE
CLEAR
AV RECEIVER
DISPLAY
Band
HT-R560
Press the [DISPLAY] button to
display the available information.
Frequency
Preset #
Number
buttons
D.TUN
1
Listening mode
Press the [TUNER] button repeatedly to select AM or FM, followed
by the [D.TUN] button.
(Actual display depends on country.)
2
Within 8 seconds, use the number buttons to enter the frequency of the radio station.
For example, to tune to 87.5 (FM),
press 8, 7, 5.
53
Listening to the Radio—Continued
Selecting Presets
Presetting AM/FM Stations
PRESET
2, 4 3
MASTER VOLUME
TUNING
ON/STANDBY
PRESET
STANDBY
MASTER VOLUME
ENTER
TUNING
ON/STANDBY
PRESET
STANDBY
DOCK
MULTI CH
DVD
VCR/DVR
CBL/SAT
AUX
TAPE
TUNER
CD
SETUP
RETURN
ENTER
AUX INPUT
PHONES
SETUP MIC
A SPEAKERS B
TONE
MOVIE/TV
MUSIC
GAME
DISPLAY DIGITAL INPUT
VIDEO
L
AUDIO
R
RT/PTY/TP MEMORY TUNING MODE
CLEAR
DOCK
MULTI CH
DVD
VCR/DVR
CBL/SAT
AUX
TAPE
TUNER
CD
SETUP
RETURN
AV RECEIVER
HT-R560
AUX INPUT
PHONES
SETUP MIC
A SPEAKERS B
TONE
MOVIE/TV
MUSIC
GAME
DISPLAY DIGITAL INPUT
VIDEO
L
AUDIO
R
RT/PTY/TP MEMORY TUNING MODE
CLEAR
AV RECEIVER
HT-R560
You can store a combination of up to 40 of your favorite
AM and FM radio stations.
1
Tune into the AM or FM station
you want to store as a preset.
2
Press the [MEMORY] button.
The preset number flashes.
MEMORY
3
PRESET
4
Press the [MEMORY] button
again to store the station.
The station is stored and the preset
number stops flashing.
Repeat this procedure for all of your
favorite stations.
MEMORY
Deleting Presets
2
MASTER VOLUME
TUNING
ON/STANDBY
PRESET
STANDBY
ENTER
MULTI CH
DVD
VCR/DVR
CBL/SAT
AUX
TAPE
TUNER
CD
SETUP
RETURN
AUX INPUT
PHONES
SETUP MIC
A SPEAKERS B
TONE
MOVIE/TV
MUSIC
GAME
DISPLAY DIGITAL INPUT
VIDEO
L
AUDIO
R
RT/PTY/TP MEMORY TUNING MODE
CLEAR
AV RECEIVER
Select the preset that you want to
delete.
See the next section.
2
While holding down the [MEMORY] button, press the
[TUNING MODE] button.
The preset is deleted and its number
disappears from the display.
MEMORY TUNING MODE
54
HT-R560
1
CLEAR
To select a preset, use the PRESET [ ]/[ ] buttons or the
remote controller’s CH [+/–] button.
While the preset number is flashing (about 8 seconds), use the
PRESET [ ]/[ ] buttons to
select a preset from 1 through 40.
PRESET
DOCK
CH +/–
You can also use the remote controller’s number buttons to select
a preset directly.
Listening to SIRIUS Satellite Radio
Listening to SIRIUS Satellite Radio®
(Only North American Model)
Important SIRIUS Satellite Radio Information
SIRIUS is available in the US for subscribers with
addresses in the continental US and is available in
Canada for subscribers with a Canadian address. To
get SIRIUS Satellite Radio a subscription and compatible tuner and antenna are required and sold separately. Visit sirius.com for the most complete and
up-to-date channel lineup and information.
Note:
Hardware and required basic monthly subscription are
sold separately. Installation costs and other fees and
taxes, including a one-time activation fee may apply.
Subscription fee is consumer only. All fees and programming are subject to change.
What is SIRIUS Satellite Radio?
Simply The Best Radio on RadioTM with all your favorite entertainment including 100% commercial-free
music, plus superior sports coverage, uncensored talk
and comedy, world-class entertainment, news, weather
and more for your car, home or office. For more information visit sirius.com or siriuscanada.ca
A warning against reverse engineering:
It is prohibited to copy, decompile, disassemble, reverse
engineer, or manipulate any technology incorporated in
receivers compatible with the SIRIUS Satellite Radio
system.
Indoor/outdoor antenna
with 21-foot cable
SiriusConnect
receiver
AC power
8-pin mini DIN
connector cable
SIRIUS
SIRIUS
antenna jack
IN 3
HDMI
IN 1
IN 2
OUT
SURR BACK SPEAKERS
ASSIGNABLE
DIGITAL IN
SURR SPEAKERS
FRONT SPEAKERS A
L
L
R
R
COMPONENT VIDEO
Y
AM
SIRIUS
DOCK
1
(DVD)
COAXIAL
CBL/SAT
CB/ PB
2
VCR/DVR
DVD
MONITOR
OUT
V
(CBL/SAT)
CENTER SPEAKER
V
ANTENNA
CR/ PR
1
IN 2
IN 1(DVD)
OUT
ASSIGNABLE
2
(CD)
IN
IN
OUT
FM
75
S
S
(VCR/DVR)
OPTICAL
IN
OUT
IN
IN
IN
OUT
IN
FRONT
SURR
PRE OUT
CENTER SURR BACK
L
ASSIGNABLE
L
L
R
R
L
SUB
WOOFER
R
R
REMOTE
CONTROL
CD
TAPE
CBL/SAT
VCR/DVR
DVD
SUB
WOOFER
FRONT SPEAKERS B
To use the included antenna indoors, you must place it
at a north-, west-, or east-facing window, depending on
where you live. If this isn’t possible, you’ll need to
install it outside, away from any overhead obstructions.
Positioning the Antenna
For a consistent satellite signal, the antenna must be
positioned correctly. Use the following map to determine which area you are in and position the antenna
accordingly.
SKY
“SIRIUS” and the SIRIUS dog
logo are registered trademarks of
SIRIUS Satellite Radio Inc.
NORTH
WEST
Setting Up the SiriusConnect™ Home
Tuner
The optional SiriusConnect Home tuner kit includes
everything for easy home installation, including the SiriusConnect receiver, indoor/outdoor antenna with 21foot cable, 8-pin mini DIN connector cable, and an AC
power adapter. See the SiriusConnect Home tuner’s
instructions for more information.
Use the 8-pin mini DIN connector cable to connect the
SiriusConnect receiver to the SIRIUS antenna jack on
the rear of the AV receiver.
1
4
5
EAST
3
2
HORIZON
SOUTH
Area 1: Point the antenna toward the sky in the east,
northeast, or southeast, either through a window or
outside.
Area 2: Point the antenna toward the sky in the north or
northeast, either through a window or outside.
Area 3: Point the antenna toward the sky in the north or
northwest, either through a window or outside.
Area 4: Point the antenna toward the sky in the west,
northwest, or southwest, either through a window or
outside.
Area 5: Put the antenna outside and point it straight
up. The antenna cannot be used indoors.
55
Listening to SIRIUS Satellite Radio—Continued
Selecting SIRIUS Satellite Radio
TUNER
MASTER VOLUME
TUNING
ON/STANDBY
PRESET
1
STANDBY
ENTER
DOCK
MULTI CH
DVD
VCR/DVR
CBL/SAT
AUX
TAPE
TUNER
CD
SETUP
On the AV receiver, press the
[TUNER] INPUT SELECTOR button repeatedly to select SIRIUS.
RETURN
AUX INPUT
PHONES
SETUP MIC
A SPEAKERS B
TONE
MOVIE/TV
MUSIC
GAME
DISPLAY DIGITAL INPUT
VIDEO
L
AUDIO
R
RT/PTY/TP MEMORY TUNING MODE
CLEAR
AV RECEIVER
HT-R560
TUNER
Remote
controller
TUNER
RECEIVER
On the remote controller, press
the [RECEIVER] REMOTE MODE
button, and then press the
[TUNER] INPUT SELECTOR button repeatedly to select SIRIUS.
If “CHECK SR TUNER” appears on
the display, make sure the SiriusConnect receiver is connected properly. If
“ANTENNA ERROR” appears, make
sure the antenna is connected properly.
ENTER
/ / /
SETUP
Signing Up for SIRIUS Satellite Radio
Setting the Satellite Radio Mode
1
Remote
controller
Press the [RECEIVER] button,
followed by the [SETUP] button.
Before you can use SIRIUS Satellite Radio, you must
first sign up for an account. You’ll need a major credit
card and your SIRIUS Satellite Radio ID, which you can
get from the AV receiver, as explained below, or from
the SiriusConnect Home tuner package.
1
Remote
controller
2
Remote
controller
Use the Up and Down [ ]/[ ]
buttons to select “8. SAT RadioMode,” and then press [ENTER].
2
Remote
controller
3
Remote
controller
Use the Left and Right [ ]/[ ]
buttons to select “SIRIUS.”
If you’ve not using satellite radio,
select None.
56
Press the [SETUP] button.
Remote
controller
Use the Up and Down [ ]/[ ]
buttons to select “11. Sirius ID.”
Your SIRIUS Satellite Radio ID number is displayed. Write it below.
ID:
3
4
Press the [RECEIVER] button,
followed by the [SETUP] button.
To sign up, go to:
http://activate.siriusradio.com
Or call: 1-888-539-SIRIUS (7474)
Listening to SIRIUS Satellite Radio—Continued
Note:
• After you’ve activated your subscription with SIRIUS
Satellite Radio, your SIRIUS Satellite Radio ID number will no longer be displayed when you select channel 0. To check your ID, you’ll need to;
press the [SETUP] button, select “11. SiriusID” with
the Up and Down [ ]/[ ] buttons, and then press
[ENTER].
Press the [SETUP] button when you’ve finished.
TUNER
TUNING
,
PRESET
Channel Search Mode
1
Press the [TUNER] button to
select Channel Search mode.
TUNER
Remote
controller
2
Use the TUNING [ ]/[ ] buttons,
or remote controller’s Up and
Down [ ]/[ ] buttons to select a
channel.
TUNING
MASTER VOLUME
TUNING
ON/STANDBY
PRESET
STANDBY
ENTER
DOCK
MULTI CH
DVD
VCR/DVR
CBL/SAT
AUX
TAPE
TUNER
CD
SETUP
RETURN
AUX INPUT
PHONES
SETUP MIC
A SPEAKERS B
TONE
MOVIE/TV
MUSIC
GAME
DISPLAY DIGITAL INPUT
VIDEO
L
AUDIO
R
RT/PTY/TP MEMORY TUNING MODE
CLEAR
AV RECEIVER
HT-R560
Remote
controller
Channel number
Channel name
You can also use the remote controller’s Left and Right Arrow [ ]/[ ]
buttons to select a category.
TUNER
Category Search Mode
/ / /
1
Press the [TUNER] button to
select Category Search mode.
ENTER
TUNER
Remote
controller
Number
buttons
2
TUNING
Selecting SIRIUS Satellite Radio
Channels
There are three ways to select SIRIUS Satellite Radio
channels:
• Channel Search mode: select any channel.
• Category Search mode: select channels by category.
• Direct tuning: enter channel number.
PRESET
Remote
controller
Use the TUNING [ ]/[ ] buttons,
or remote controller’s Left and
Right [ ]/[ ] buttons to select a
category, and use the PRESET
[ ]/[ ] buttons, or remote controller’s Up and Down [ ]/[ ]
buttons to select a channel in
that category.
57
Listening to SIRIUS Satellite Radio—Continued
TUNING ,
PRESET
RETURN
MASTER VOLUME
TUNING
ON/STANDBY
PRESET
STANDBY
ENTER
DOCK
DVD
MULTI CH
VCR/DVR
CBL/SAT
AUX
TAPE
TUNER
CD
SETUP
RETURN
AUX INPUT
PHONES
SETUP MIC
TONE
A SPEAKERS B
MOVIE/TV
MUSIC
GAME
DISPLAY DIGITAL INPUT
VIDEO
L
AUDIO
R
RT/PTY/TP MEMORY TUNING MODE
CLEAR
AV RECEIVER
DISPLAY
HT-R560
ENTER
TUNING MODE
MEMORY
Notes:
• If you select an unavailable channel, “INVALID
CHANNEL” appears on the display.
• If you select a channel that you are not subscribed to,
“CALL SIRIUS” appears on the display.
• Channels that are locked must be unlocked before you
can listen to them. See “Parental Lock” on page 61 for
more information.
Selecting Channels on the AV receiver:
1
TUNING MODE
DISPLAY
2
ENTER
Press the [TUNING MODE] button
repeatedly to select Channel
Search mode or Category Search
mode.
Press [ENTER] repeatedly to
select a category.
ENTER
RETURN
SETUP
3
TUNING
Number
buttons
Use the TUNING Up and Down
[ ]/[ ] buttons to select a channel.
In Channel Search mode, you can
select any channel.
In Category Search mode, you can only
select channels from the currently
selected category.
D.TUN
Selecting the Previous Channel:
Direct Tuning
You can select a SIRIUS Satellite Radio channel
directly by entering its number with the remote controller.
1
Press the [D.TUN] button.
Remote
controller
Remote
2 controller
58
Within 8 seconds, use the number buttons to enter the channel
number.
For example, to select channel #20,
press [0], [2], and [0], or press [2], [0],
and [ENTER].
AV receiver
RETURN
Remote
controller
To listen to the previously
selected SIRIUS Satellite Radio
channel, press the [RETURN]
button.
Listening to SIRIUS Satellite Radio—Continued
Presetting SIRIUS Channels
You can store a combination of up to 40 of your favorite
SIRIUS Satellite Radio channels and AM/FM radio stations as presets.
1
Tune into the SIRIUS channel that
you want to store as a preset.
2
Press the [MEMORY] button.
The preset number flashes.
■ Deleting Presets
1
Select the preset that you want to
delete.
See the previous section.
2
While holding down the [MEMORY] button, press the [TUNING
MODE] button.
The preset is deleted and its number
disappears from the display.
MEMORY TUNING MODE
CLEAR
MEMORY
3
PRESET
While the preset number is flashing (about 8 seconds), use the
PRESET [ ]/[ ] buttons to
select a preset from 1 through 40.
Displaying SIRIUS Satellite Radio
Information
Press the [DISPLAY] button repeatedly to cycle
through the available information.
Channel name
4
MEMORY
Press the [MEMORY] button
again to store the channel.
The channel is stored and the preset
number stops flashing.
Repeat this procedure for all of your
favorite SIRIUS Satellite Radio channels.
■ Selecting Presets
AV receiver
PRESET
To select a preset, use the PRESET [ ]/[ ] buttons, or the
remote controller’s CH [+/–] button.
Channel number
Channel number
& preset number
Preset number
Category
Artist/Composer
name
Song title
Note:
If the category, artist, or song title is not available,
“- - -” will be displayed instead.
Remote
controller
You can also use the remote controller’s number buttons to select
a preset directly.
■ SIRIUS Satellite Radio Messages
The following messages may appear while using
SIRIUS Satellite Radio.
ACQUIRING
The SiriusConnect receiver is acquiring the signal or no
signal is present. Make sure the SiriusConnect Home
tuner is connected properly and that there are no obstacles close by.
ANTENNA ERROR
Make sure the SiriusConnect Home tuner is connected
properly.
59
Listening to SIRIUS Satellite Radio—Continued
SUB UPDATED
Displayed while your subscription is being updated. No
operations can be performed until this message has
cleared.
UPDATING XXX%
Displayed while the channel map is being updated. Wait
until the updating is complete.
SIRIUS UPDATING
Displayed while the SiriusConnect receiver’s firmware
is being updated.
INVALID CHANNEL
Displayed if you select an unavailable channel.
CALL SIRIUS
Displayed when you select a channel to which you are
not subscribed. Call SIRIUS if you want to subscribe.
CHECK SR TUNER
Displayed if the SiriusConnect receiver is not connected. Make sure the SiriusConnect receiver is connected properly, and make sure its AC adapter is
plugged in.
Positioning the SiriusConnect Home
Tuner
You can check the signal strength of the SIRIUS Satellite Radio signal and adjust the position of the SiriusConnect Home antenna accordingly.
1
Remote
controller
2
Remote
controller
Press the [RECEIVER] button,
followed by the [SETUP] button.
Use the Up and Down [ ]/[ ]
buttons to select “8.ANT Aiming,”
and then press [ENTER].
Note:
• If the 8. SAT RadioMode is set to
None (see page 56), the “ANT Aiming” item is not available.
3
RECEIVER
Adjust the position of the
indoor/outdoor antenna connected to the SiriusConnect
receiver so that the satellite
(SAT) signal strength bar is as
long as possible.
ENTER
/ / /
SETUP
If you cannot receive a satellite signal,
press the Down [ ] button to display
the terrestrial (TER) signal strength
meter and adjust your antenna so that
the bar is as long as possible.
Terrestrial signals are only available in
certain areas.
Number
buttons
So long as the signal strength is good,
you can enjoy SIRIUS Satellite Radio
by using either satellite or terrestrial
reception.
60
Listening to SIRIUS Satellite Radio—Continued
3
Use the Left and Right [ ]/[ ]
buttons to change the number
displayed between the angle
brackets < >, and then press
[ENTER]. Repeat this for each
digit in the PIN number.*
RECEIVER
ENTER
4
Remote
controller
/ / /
SETUP
5
Number
buttons
Remote
controller
Use the Up and Down [ ]/[ ]
buttons to select the channel that
you want to lock out, for example:
Press the Left and Right [ ]/[
buttons so that an asterisk
appears next to the name, as
shown below, and then press
[ENTER]:
]
The message “Locked” will appear on
the display.
Parental Lock
You can lock out channels that you do not want to
receive.
1
Remote
controller
2
Remote
controller
6
Remote
controller
Press the [SETUP] button.
Setup closes.
Press the [RECEIVER] button,
followed by the [SETUP] button.
* The default number is “0000.” If you want to change the
default setting, see “Changing the PIN Number” on page 62.
Use the Up and Down [ ]/[ ]
buttons to select “10. Parental
Lock,” and then press [ENTER].
“Lock : <0>” appears on the display.
To unlock a previously locked channel, select the
locked channel (see step 1–4), press the Left and Right
[ ]/[ ] buttons so that the asterisk disappears (see
step 5), and then press [ENTER]. The message
“Unlocked” will appear on the display.
Note:
• If the SAT Radio Mode is set to None
(see page 56), the “ParentalLock”
item is not available.
61
Listening to SIRIUS Satellite Radio—Continued
3
Remote
controller
Use the Up and Down [ ]/[ ]
buttons to select “Edit Code,”
and then press [ENTER].
“Enter : <0>” appears on the display.
RECEIVER
ENTER
/ / /
4
SETUP
Remote
controller
Use the number buttons to enter
the old PIN number.
If you enter the wrong PIN number,
“Wrong Code!” appears on the display.
You’ll be returned to step 2, “8. Parental Lock,” and will need to start again.
“New : <0>” appears on the display.
Number
buttons
5
Remote
controller
Use the number buttons to enter
the new PIN number.
“Confirm: <0>” appears on the display.
Changing the PIN Number
1
Remote
controller
Press the [RECEIVER] button,
followed by the [SETUP] button.
6
Enter the new PIN number again.
If you enter the wrong PIN number,
“Wrong Code!” appears on the display.
You’ll be returned to step 2, “Parental
Lock,” and will need to start again.
7
2
Remote
controller
Use the Up and Down [ ]/[ ]
buttons to select “10. Parental
Lock,” and then press [ENTER].
Note:
• If the 8. SAT RadioMode is set to
None (see page 56), the “ParentalLock” item is not available.
62
Remote
controller
Press the [SETUP] button.
Setup closes.
Listening to the Radio—Continued
Using RDS (European models only)
RDS only works in areas where RDS broadcasts are
available. When tuned to an RDS station, the RDS indicator appears.
RDS indicator
■ What is RDS?
RDS stands for Radio Data System and is a method of
transmitting data in FM radio signals. It was developed
by the European Broadcasting Union (EBU) and is available in most European countries. RDS is approved by the
National Radio Systems Committee (NRSC) and is
available in North America.
Many FM stations use it these days. In addition to displaying text information, RDS can also help you find
radio stations by type (e.g., news, sport, rock, etc.).
The AV receiver supports four types of RDS information:
RDS Program Types (PTY)
Type
Display
None
None
News reports
News
Current affairs
Affairs
Information
Info
Sport
Sport
Education
Educate
Drama
Drama
Culture
Culture
Science and technology
Science
Varied
Varied
Pop music
Pop M
Rock music
Rock M
Middle of the road music
Easy M
Light classics
Light M
Serious classics
Classics
Other music
Other M
Weather
Weather
Finance
Finance
Children’s programmes
Children
PS (Program Service)
Social affairs
Social
When tuned to an RDS station that’s broadcasting PS
information, the station’s name will be displayed. Pressing the [DISPLAY] button will display the frequency for
3 seconds.
Religion
Religion
Phone in
Phone In
Travel
Travel
Leisure
Leisure
RT (Radio Text)
When tuned to an RDS station that’s broadcasting text
information, the text will be shown on the display (see
page 64).
PTY (Program Type)
Jazz music
Jazz
Country music
Country
National music
Nation M
Oldies music
Oldies
This allows you to search RDS radio stations by type
(see page 64).
Folk music
Folk M
Documentary
Document
TP (Traffic Program)
Alarm test
TEST
This allows you to search for RDS radio stations that
broadcast traffic information (see page 64).
Notes:
• In some cases, the characters displayed on the AV
receiver may not be identical to those broadcast by the
radio station. Also, unexpected characters may be displayed when unsupported characters are received.
This is not a malfunction.
• If the signal from an RDS station is weak, RDS data
may be displayed intermittently or not at all.
Alarm
Alarm!
63
Listening to the Radio—Continued
Displaying Radio Text (RT)
4
RT/PTY/TP
To start the search, press
[ENTER].
The AV receiver searches until it finds a
station of the type you specified, at
which point it stops briefly before continuing with the search.
ENTER
MASTER VOLUME
TUNING
ON/STANDBY
PRESET
STANDBY
ENTER
DOCK
MULTI CH
DVD
VCR/DVR
CBL/SAT
AUX
TAPE
TUNER
CD
SETUP
RETURN
AUX INPUT
PHONES
SETUP MIC
A SPEAKERS B
TONE
MOVIE/TV
MUSIC
GAME
DISPLAY DIGITAL INPUT
VIDEO
L
AUDIO
R
RT/PTY/TP MEMORY TUNING MODE
CLEAR
AV RECEIVER
HT-R560
5
When a station you want to listen
to is found, press [ENTER].
If no stations are found, the message
“Not Found” appears.
ENTER
When tuned to an RDS station that’s broadcasting text
information, the text can be displayed.
Press the [RT/PTY/TP] button
once.
The RT information scrolls across the
display.
RT/PTY/TP
Listening to Traffic News (TP)
1
Notes:
• The message “Waiting” may appear while the AV
receiver waits for the RT information.
• If the message “No Text Data” appears on the display,
no RT information is available.
MASTER VOLUME
TUNING
ON/STANDBY
ENTER
DOCK
MULTI CH
DVD
VCR/DVR
CBL/SAT
AUX
TAPE
TUNER
CD
SETUP
RETURN
AUX INPUT
PHONES
SETUP MIC
A SPEAKERS B
TONE
MOVIE/TV
MUSIC
GAME
DISPLAY DIGITAL INPUT
VIDEO
L
AUDIO
R
RT/PTY/TP MEMORY TUNING MODE
CLEAR
AV RECEIVER
HT-R560
2
You can search for stations that broadcast traffic news.
4, 5
MASTER VOLUME
TUNING
ON/STANDBY
PRESET
STANDBY
Finding Stations by Type (PTY)
1
3
1
Use the [TUNER] input selector
button to select FM.
PRESET
STANDBY
ENTER
DOCK
MULTI CH
DVD
VCR/DVR
CBL/SAT
AUX
TAPE
TUNER
CD
SETUP
TUNER
RETURN
AUX INPUT
PHONES
SETUP MIC
A SPEAKERS B
TONE
MOVIE/TV
MUSIC
GAME
DISPLAY DIGITAL INPUT
VIDEO
L
AUDIO
R
RT/PTY/TP MEMORY TUNING MODE
CLEAR
AV RECEIVER
HT-R560
2 3
2
RT/PTY/TP
You can search for radio stations by type.
1
Use the [TUNER] input selector
button to select FM.
TUNER
2
RT/PTY/TP
3
PRESET
64
Press the [RT/PTY/TP] button
twice.
The current program type appears on
the display.
Use the PRESET [ ]/[ ] buttons
to select the type of program you
want.
See the table on page 63.
3
ENTER
Press the [RT/PTY/TP] button
three times.
If the current radio station is broadcasting TP (Traffic Program), “[TP]” will
appear on the display and traffic news
will be heard as and when it’s broadcast. If “TP” without square brackets
appears, this means that the station is
not broadcasting TP.
To locate a station that is broadcasting TP, press [ENTER].
The AV receiver searches until it finds a
station that’s broadcasting TP.
If no stations are found, the message
“Not Found” appears.
DS-A1L Dock for the iPod
About the DS-A1L Dock
With the supplied DS-A1L Onkyo Dock, you can easily
play the music stored on your Apple iPod through the AV
receiver and enjoy great sound. You can use the AV
receiver’s remote controller to operate your iPod.
■ Adjusting the iPod Adapter
The iPod adapter needs to be adjusted to match your particular iPod. If there’s a gap between the back of your iPod
and the adapter, turn the adapter counterclockwise to close
the gap. Turning the adapter counterclockwise moves it
forward. Turning it clockwise moves it backward.
For the latest information on the Dock, see the Onkyo
Web site at: www.onkyo.com
Forward
Backward
iPod adapter
iPod connector
iPod slot
Power indicator
Notes:
• To prevent iPod connector damage, don’t twist your
iPod when inserting or removing it, and be careful
not to knock over the Dock while your iPod is
inserted.
• Don’t use the Dock with any other iPod accessories, such as FM transmitters and microphones, as
they may cause a malfunction.
Compatible iPod models
■ Made for:
• 5th Generation iPod (iPod with video)
• iPod photo (iPod with color display)
• 4th Generation iPod
• 2nd Generation iPod nano
• 1st Generation iPod nano
• iPod mini
Note:
• 3rd generation iPod models are not supported.
• Before using the Dock, update your iPod with the
latest software, available from the Apple Web site
at: www.apple.com
Putting Your iPod in the Dock
1. Turn on the AV receiver, and select the appropriate inputs on the AV receiver.
2. Align your iPod with the Dock’s iPod slot, and
carefully place your iPod in the slot, as shown.
Remove iPod
case before
inserting
Function Overview
■ Basic Operation
Note:
• The AV receiver may take several seconds to startup, so you might not hear the first few seconds of
the first song.
• System On Function: When you turn on the AV
receiver, the iPod turns on as well.
• System Off Function: When you turn off the AV
receiver, the iPod turns off as well.
• Auto Power On Function*: If you start iPod playback while the AV receiver is on Standby, the AV
receiver will automatically turn on and select your iPod
as the input source. Then, your iPod will start playback.
• Direct Change Function*: If you start iPod playback while listening to another input source, the AV
receiver will automatically select your iPod as the input
source.
• Linked Dimmer Operation: When you use the AV
receiver’s Dimmer function to change its display’s
brightness, the brightness of the Dock’s Power indicator
will change as well.
• Using the AV receiver’s Remote Controller: You
can use the AV receiver’s remote controller to control
basic iPod functions.
* If you use your iPod’s controls to start an iPod slideshow or
video, this function will not work, so use the remote controller
instead.
65
DS-A1L Dock for the iPod—Continued
Operating Notes:
• Before selecting a different input source, stop iPod
playback to prevent the AV receiver from selecting the
iPod input source by mistake.
• If any accessories are connected to your iPod, the AV
receiver may not be able to select the input source
properly.
• While your iPod is in the Dock, its volume control has
no effect. If you adjust your iPod’s volume control
while it’s in the Dock, make sure it’s not set too high
before you reconnect your headphones.
■ Using Your iPod’s Alarm Clock
You can use your iPod’s Alarm Clock function to automatically turn on your iPod and the AV receiver at a
specified time. The AV receiver’s input source will automatically be set to the input to which your iPod is connected.
Notes:
• To use this function, your iPod must be in the Dock,
and the Dock must be connected to the AV receiver.
• When you use this function, be sure to set the AV
receiver’s volume control to a suitable level.
• The AV receiver may take several seconds to startup, so you might not hear the first few seconds of
the first song.
■ Charging Your iPod’s Battery
The Dock charges your iPod’s battery while your iPod is
in the Dock and connected to the DOCK jacks on the AV
receiver. While your iPod is seated in the Dock, its battery will be charged when the AV receiver is set to On or
Standby.
66
Using the Listening Modes
Selecting with the Remote Controller
Selecting the Listening Modes
For a description of each listening mode, see “About the
Listening Modes” on page 71.
• The Dolby Digital and DTS listening modes
can only be selected if your DVD player is
connected to the AV receiver with a digital
audio connection (coaxial, optical, or HDMI).
MOVIE/TV
MUSIC
STEREO
GAME
• The listening modes you can select depends
on the format of the input signal. To check
the format, see “Displaying Source Information” on page 49.
• While a pair of headphones is connected,
you can only select the Mono, Direct, or Stereo listening mode.
• While speaker B is on, you can select only
the Direct or Stereo listening mode.
• The listening modes cannot be selected
while speaker set A is off.
■ [MUSIC] button
This button selects the listening modes intended for
use with music.
Selecting on the AV Receiver
MUSIC
MASTER VOLUME
TUNING
ON/STANDBY
■ [STEREO] button
This button selects the Stereo listening mode.
ENTER
MULTI CH
DVD
VCR/DVR
CBL/SAT
AUX
TAPE
TUNER
CD
SETUP
■ [GAME] button
This button selects the listening modes intended for
use with video games.
PRESET
STANDBY
DOCK
■ [MOVIE/TV] button
This button selects the listening modes intended for
use with movies and TV.
RETURN
AUX INPUT
PHONES
SETUP MIC
A SPEAKERS B
TONE
MOVIE/TV
MUSIC
GAME
DISPLAY DIGITAL INPUT
VIDEO
L
AUDIO
R
RT/PTY/TP MEMORY TUNING MODE
CLEAR
AV RECEIVER
HT-R560
GAME
MOVIE/TV
■ [MOVIE/TV] button
This button selects the listening modes intended for
use with movies and TV.
■ [MUSIC] button
This button selects the listening modes intended for
use with music.
■ [GAME] button
This button selects the listening modes intended for
use with video games.
67
Using the Listening Modes—Continued
Listening Modes Available for Each Source Format
Analog and PCM Sources
PCM
Source format
32–96kHz*1
Media
Button
Listening Mode
Mono
Dolby PLII Movie/Dolby PLIIx Movie*2
Neo:6 Cinema
[MOVIE/TV]
MonoMovie*3 *4
TV Logic*3 *4
AllChStereo
FullMono
T-D *4
Direct
Stereo
Dolby PLII Music/Dolby PLIIx Music*2
Neo:6 Music
[MUSIC]
Orchestra*3 *4
UnPlugged*3 *4
Studio-Mix*3 *4
AllChStereo
FullMono
Dolby PLII Game/Dolby PLIIx Game*2
[GAME]
AllChStereo
FullMono
T-D *4
[STEREO]
*1.
*2.
*3.
*4.
68
Stereo
Multi channel Analog
CD, TV, radio,
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
32/44/48/88/96kHz
If there are no surround back speakers, or speaker set B is on, Dolby Pro Logic II is used.
Available only when using surround speakers.
PCM of 64kHz, 88.2kHz, and 96kHz are processed at 32kHz, 44.1kHz, and 48kHz respectively.
DVD
✔
Using the Listening Modes—Continued
Dolby Digital Sources
Source format
Multichannel
Media
Button
DolbyDigital
Neo:6
Dolby PLII Movie/Dolby PLIIx Movie*1
DolbyEX
[MOVIE/T
Neo:6 Cinema
V]
MonoMovie*2
TV Logic*2
AllChStereo
FullMono
T-D
Direct
Stereo
DolbyDigital
Neo:6
Dolby PLII Music/Dolby PLIIx Music*1
[MUSIC]
DolbyEX
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Neo:6 Music
*2
Orchestra
UnPlugged*2
Studio-Mix*2
AllChStereo
FullMono
DolbyDigital
Neo:6
✔
✔
✔
✔
✔
✔
✔
DolbyEX
AllChStereo
FullMono
T-D
[STEREO
Stereo
]
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Dolby PLII Game/Dolby PLIIx Game*1
[GAME]
Mono/Multiplex
DVD, DTV, etc.
Listening Mode
Mono
Dolby Digital
2ch
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
*1. If there are no surround back speakers, or speaker set B is on, Dolby Pro Logic II is used.
*2. Available only when using surround speakers.
Requires 6.1/7.1 speakers. Not available while speaker set B is on.
Requires 7.1 speakers. Not available while speaker set B is on.
69
Using the Listening Modes—Continued
DTS Sources
DTS, DTS 96/24
Source format
Multichannel
Media
Button
2ch
DVD, CD, etc.
Listening Mode
✔
✔
Mono
DTS, DTS 96/24
Mono/Multiplex
✔
DVD, CD, etc.
✔
✔
✔
✔*1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔*1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔*1
✔
✔
✔
✔
✔
✔
✔
✔
DTS-ES Discrete/Matrix
Neo:6
*2
Dolby PLII Movie/Dolby PLIIx Movie
[MOVIE/TV]
DolbyEX
✔
✔
✔
Neo:6 Cinema
✔
✔
✔
✔
✔
✔
✔
✔
*3 *4
MonoMovie
TV Logic*3 *4
AllChStereo
FullMono
T-D*4
Direct
Stereo
DTS, DTS 96/24
✔
✔
✔
✔
✔
✔
✔
✔
✔
DTS-ES Discrete/Matrix
Neo:6
Dolby PLII Music/Dolby PLIIx Music*2
[MUSIC]
DolbyEX
✔
✔
✔
Neo:6 Music
✔
✔
✔
✔
✔
✔
Orchestra*3 *4
*3 *4
UnPlugged
Studio-Mix*3 *4
AllChStereo
FullMono
DTS, DTS 96/24
✔
✔
✔
✔
✔
✔
✔
DTS-ES Discrete/Matrix
✔
Neo:6
✔
*2
[GAME]
Dolby PLII Game/Dolby PLIIx Game
DolbyEX
AllChStereo
FullMono
T-D*4
[STEREO]
*1.
*2.
*3.
*4.
Stereo
✔
✔
✔
✔
✔
If there are no surround back speakers, or speaker set B is on, DTS is used.
If there are no surround back speakers, or speaker set B is on, Dolby Pro Logic II is used.
Available only when using surround speakers.
DTS 96/24 is processed as DTS.
Requires 6.1/7.1 speakers. Not available while speaker set B is on.
Requires 7.1 speakers. Not available while speaker set B is on.
70
DTS
Discrete/Matrix
✔
✔
✔
✔
Using the Listening Modes—Continued
About the Listening Modes
The AV receiver’s listening modes can transform your
listening room into a movie theater or concert hall, with
high fidelity and stunning surround sound.
The illustration shows which speakers are active in
each listening mode with 7.1 channel speaker system.
Front left
Center
Front right
Subwoofer
Surround left
Surround
back left/ right
Surround right
Dolby Digital
Use this mode with DVDs that bear the Dolby Digital
logo, and Dolby Digital TV broadcasts. This is the most
common digital surround-sound format, and it’ll put you
right in the middle of the action, just like being in a
movie theater or concert hall.
5.1-channel source + Dolby EX
These modes expand 5.1-channel sources for 6.1/7.1channel playback. They’re especially suited to Dolby EX
soundtracks that include a matrix-encoded surround
back channel. The additional channel adds an extra
dimension and provides an enveloping surround sound
experience, perfect for rotating and fly-by sound effects.
5.1-channel source + Dolby PLIIx Music
Direct
In this mode, audio from the input source is output
directly with minimal processing, providing high-fidelity reproduction. All of the source’s audio channels are
output as they are.
Stereo
Sound is output by the front left and right speakers and
subwoofer.
Mono
Use this mode when watching an old movie with a mono
soundtrack, or use it with the foreign language
soundtracks recorded in the left and right channels of
some movies. It can also be used with DVDs or other
sources containing multiplexed audio, such as karaoke
DVDs.
Dolby Pro Logic IIx
These modes use the Dolby Pro Logic IIx Music mode
to expand 5.1-channel sources for 6.1/7.1-channel playback.
5.1-channel source + Dolby PLIIx Movie
These modes use the Dolby Pro Logic IIx Movie mode
to expand 5.1-channel sources for 7.1-channel playback.
DTS
The DTS digital surround-sound format supports up to
5.1 discrete channels and uses less compression for highfidelity reproduction. Use it with DVDs and CDs that
bear the DTS logo.
DTS 96/24
This mode is for use with DTS 96/24 sources. This is
high-resolution DTS with a 96kHz sampling rate and 24bit resolution, providing superior fidelity. Use it with
DVDs that bear the DTS 96/24 logo.
Dolby Pro Logic II
DTS-ES Discrete
Dolby Pro Logic IIx expands any 2-channel source for
7.1-channel playback. It provides a very natural and
seamless surround-sound experience that fully envelops
the listener. As well as music and movies, video games
can also benefit from the dramatic spatial effects and
vivid imaging. If you’re not using any surround back
speakers, Dolby Pro Logic II will be used instead of
Dolby Pro Logic IIx.
This mode is for use with DTS-ES Discrete soundtracks,
that use a discrete surround back channel for true
6.1/7.1-channel playback. The seven totally separate
audio channels provide better spatial imaging and 360degree sound localization, perfect for sounds that pan
across the surround channels. Use it with DVDs that bear
the DTS-ES logo, especially those with a DTS-ES Discrete soundtrack.
•
Dolby PLIIx Movie
Use this mode with any stereo or Dolby Surround
(Pro Logic) movie (e.g., TV, DVD, VHS).
•
Dolby PLIIx Music
Use this mode with any stereo or Dolby Surround
(Pro Logic) music source (e.g., CD, radio, cassette,
TV, VHS, DVD).
•
DTS-ES Matrix
This mode is for use with DTS-ES Matrix soundtracks,
that use a matrix-encoded back-channel for 6.1/7.1channel playback. Use it with DVDs that bear the DTSES logo, especially those with a DTS-ES Matrix
soundtrack.
Dolby PLIIx Game
Use this mode with video games, especially those
that bear the Dolby Pro Logic II logo.
71
Using the Listening Modes—Continued
DTS Neo:6
This mode expands any 2-channel source for 7.1-channel playback. It uses seven full-bandwidth channels of
matrix decoding for matrix-encoded material, providing
a very natural and seamless surround sound experience
that fully envelops the listener.
•
Neo:6 Cinema (NEO:6 Cin)
Use this mode with any stereo movie (e.g., TV,
DVD, VHS).
•
Neo:6 Music (NEO:6 Mus)
Use this mode with any stereo music source (e.g.,
CD, radio, cassette, TV, VHS, DVD).
Onkyo Original DSP Modes
Mono Movie
This mode is suitable for old movies and other mono
sources. The center speaker outputs the sound as it is,
while reverb is applied to the sound output by the other
speakers, giving presence to even mono material.
Orchestra
Suitable for classical or operatic music, this mode
emphasizes the surround channels in order to widen the
stereo image and simulates the natural reverberation of a
large hall.
5.1-channel source + Neo:6
Unplugged
This mode uses Neo:6 to expand 5.1-channel sources for
6.1/7.1-channel playback.
Suitable for acoustic instruments, vocals, and jazz, this
mode emphasizes the front stereo image, giving the
impression of being right in front of the stage.
Studio-Mix
Suitable for rock or pop music, listening to music in this
mode creates a lively sound field with a powerful acoustic image, like being at a club or rock concert.
TV Logic
This mode adds realistic acoustics to TV shows produced in a TV studio, surround effects to the entire
sound, and clarity to voices.
All Ch Stereo (AllCh St)
Ideal for background music, this mode fills the entire listening area with stereo sound from the front, surround,
and surround back speakers.
Full Mono
In this mode, all speakers output the same sound in
mono, so the sound you hear is the same regardless of
where you are within the listening room.
T-D (Theater-Dimensional)
or
With this mode you can enjoy a virtual 5.1 surround
sound even with only two or three speakers. This works
by controlling how sounds reach the listener’s left and
right ears. Good results may not be possible if there’s too
much reverb, so we recommend that you use this mode
in an environment with little or no natural reverb.
72
Recording
This section explains how to record the input source and
how to record audio and video from separate sources.
Notes:
• The surround sound and DSP listening modes cannot
be recorded.
• Copy-protected DVDs cannot be recorded.
• Sources connected to the analog multichannel input
cannot be recorded.
• Sources connected to a digital input cannot be
recorded. Only analog inputs can be recorded.
• DTS signals will be recorded as noise, so don’t
attempt analog recording of DTS CDs or LDs.
• While the Pure Audio listening mode is selected, the
VCR/DVR OUT V and S jacks don’t output video signals, so select another mode when recording.
Recording from Different AV Sources
You can overdub audio onto your video recordings by
simultaneously recording audio and video from two separate sources. This is possible because only the audio
source is switched when an audio-only input source,
such as TAPE, TUNER, or CD, is selected, the video
source remains the same.
In the following example, audio from the CD player connected to the CD IN and video from the camcorder connected to the AUX INPUT VIDEO jack are recorded by
the VCR connected to the VCR/DVR OUT jacks.
AUX INPUT
VIDEO
L
AUDIO
R
Recording the Input Source
Camcorder
Audio sources can be recorded to a recorder (e.g., cassette deck, CDR, MD) connected to the TAPE OUT jack.
Video sources can be recorded to a video recorder (e.g.,
VCR, DVR) connected to the VCR/DVR OUT jacks.
See pages 27 to 40 for hookup information.
video signal
audio signal
IN 3
HDMI
IN 2
IN 1
OUT
ASSIGNABLE
DIGITAL IN
COMPONENT VIDEO
Y
1
DVD
AUX
VCR/DVR CBL/SAT
TAPE
TUNER
Use the input selector buttons to
select the source that you want
to record.
See “Which Connections Should I
Use?” on page 28 to see which signals
can be output and recorded.
AM
SIRIUS
DOCK
1
(DVD)
COAXIAL
CBL/SAT
CB/ PB
2
(CBL/SAT)
VCR/DVR
DVD
MONITOR
OUT
V
V
S
S
ANTENNA
CR/ PR
1
(VCR/DVR)
OPTICAL
IN 2
IN 1(DVD)
OUT
ASSIGNABLE
2
(CD)
IN
IN
OUT
IN
OUT
IN
IN
IN
OUT
IN
FRONT
SURR
FM
75
CENTER SURR BACK
ASSIGNABLE
L
L
L
R
R
R
REMOTE
CONTROL
CD
TAPE
CBL/SAT
DVD
VCR/DVR
SUB
WOOFER
CD
Remote
controller
You can watch the source while recording it. The AV receiver’s MASTER
VOLUME control has no effect on
recording.
2
On your recorder, start recording.
3
On the source component, start
playback.
Note:
• If you select a different input source during recording,
that input source will be recorded instead.
CD player
VCR
1
Prepare the camcorder and CD player for
playback.
2
Prepare the VCR for recording.
3
Press the [AUX] input selector button.
4
Press the [CD] input selector button.
This selects the CD player as the audio source but
leaves the camcorder as the video source.
5
Start recording on the VCR, then start
playback on the camcorder and CD player.
Video from the camcorder and audio from the CD
player are recorded by the VCR.
73
Adjusting the Listening Modes
Using the Audio Adjust Settings
With the Audio Adjust functions and settings, you can
adjust the sound and listening modes as you like.
1
Press the [RECEIVER] button followed by the [SETUP] button.
Mono
■ Input (Mono)
This setting determines which channel is output when
the Mono listening mode is used with a stereo source.
L+R: Both the left and right channels are output
(default).
L: Only the left channel is output.
R: Only the right channel is output.
PLIIx/Neo:6 Settings
PLIIx Music (2 ch Input)
2
Use the Up and Down [ ]/[ ]
buttons to select “6.Audio
Adjust,” and then press [ENTER].
These settings apply to only 2-channel stereo sources.
If you’re not using any surround back speakers, these
settings apply to Dolby Pro Logic II, not Dolby Pro
Logic IIx.
■ Panorama
With this setting, you can broaden the width of the front
stereo image when using the Dolby Pro Logic IIx Music
listening mode.
On: Panorama function on.
Off: Panorama function off (default).
3
Use the Left and Right [ ]/[ ]
buttons to change the setting.
Press the Down [ ] button to
select the next setting.
Repeat this step for the other settings.
4
Press the [SETUP] button.
Setup closes.
The Audio Adjust settings are explained below.
Multiplex/Mono Settings
Multiplex
■ Input (Mux)
This setting determines which channel of a stereo multiplex source is output. Use it to select audio channels or
languages with multiplex sources, multilingual TV
broadcasts, and so on.
Main: The main channel is output (default).
Sub: The sub channel is output.
M/S: Both the main and sub channels are output.
74
■ Dimension
With this setting, you can move the sound field forward
or backward when using the Dolby Pro Logic IIx Music
listening mode. It can be adjusted from –3 to +3. The
default value is 0. Higher settings move the sound field
backward. Lower settings move it forward.
If the stereo image feels too wide, or there’s too much
surround sound, move the sound field forward to
improve the balance. Conversely, if the stereo image
feels like it’s in mono, or there’s not enough surround
sound, move it backward.
■ Center Width
With this setting, you can adjust the width of the sound
from the center speaker when using the Dolby Pro Logic
IIx Music listening mode. Normally, if you’re using a
center speaker, the center channel sound is output by
only the center speaker. (If you’re not using a center
speaker, the center channel sound will be distributed to
the front left and right speakers to create a phantom center). This setting controls the front left, right, and center
mix, allowing you to adjust the weight of the center
channel sound. It can be adjusted from 0 to 7. The default
value is 3.
Adjusting the Listening Modes—Continued
Neo:6 Music
■ Center Image
The DTS Neo:6 Music listening mode creates 6-channel
surround sound from 2-channel stereo sources. With this
setting, you can specify by how much the front left and
right channel output is attenuated in order to create the
center channel. It can be adjusted from 0 to 5. The
default value is 2.
When set to 0, the front left and right channel output is
attenuated by half (–6 dB), giving the impression that the
sound is located centrally. This setting works well when
the listening position is considerably off center. When
set to 5, the front left and right channels are not attenuated, maintaining the original stereo balance.
nected to the SUBWOOFER input jack of the multichannel DVD input.
You can select 0 dB (default), +5 dB, +10 dB, or +15 dB.
If you find that your subwoofer is too loud, try the
+10 dB or +15 dB setting.
Using the Audio Settings
You can change various audio settings by pressing the
[AUDIO] button.
1
Press the [RECEIVER] button followed by the [AUDIO] button.
2
Use the Up and Down [ ]/[ ]
buttons to select an item.
3
Use the Left and Right [ ]/[ ]
buttons to change the setting.
Repeat this step for the other settings.
Dolby Digital Settings
■ Dolby EX
This setting determines how Dolby EX signals are handled.
Auto: When the source is Dolby EX, you can select
the Dolby EX listening mode.
Manual: When the source is Dolby EX, you can select
any of the listening modes compatible with this
format (e.g., Dolby EX, Dolby Pro Logic IIx,
etc.).
T–D (Theater-Dimensional) Setting
■ LstnAngl (Listening Angle)
With this setting, you can optimize the Theater-Dimensional listening mode by specifying the angle of the front
left and right speakers relative to the listening position.
Ideally, the front left and right speakers should be equidistant from the listening position and at an angle close
to one of the two available settings.
Front left speaker
Front right speaker
20˚/40˚
Narrow: Select if the listening angle is 20 degrees.
Wide: Select if the listening angle is 40 degrees
(default).
Multichannel Subwoofer Setting
■ SW InSens
On some DVD players, the signal from the multichannel
subwoofer output is 15 dB higher than normal. You can
change the subwoofer sensitivity to match your DVD
player. Note that this setting only affects signals con-
The Audio Adjust settings are explained below.
Tone Control Settings
You can adjust the bass and treble for the front speakers,
except when the Direct listening mode is selected.
■ Bass
You can boost or cut low-frequency sounds output by the
front speakers from –10 dB to +10 dB in 2 dB steps.
■ Treble
You can boost or cut high-frequency sounds output by
the front speakers from –10 dB to +10 dB in 2 dB steps.
Notes:
• To bypass the bass and treble tone circuits, select the
Direct listening mode.
• This procedure can also be performed on the AV
receiver by using its [TONE], [–], and [+] buttons.
75
Adjusting the Listening Modes—Continued
Late Night Function
Music Optimizer
■ Late Night
With the Late Night function, you can reduce the
dynamic range of Dolby Digital material so that you can
still hear quiet parts even when listening at low volume
levels—ideal for watching movies late at night when you
don’t want to disturb anyone.
For Dolby Digital sources, the options are:
Off: Late Night function off (default).
Low: Small reduction in dynamic range.
High: Large reduction in dynamic range.
Notes:
• The Late Night function can be used only when the
input source is Dolby Digital.
• The effect of the Late Night function depends on the
material that you are playing and the intention of the
original sound designer, and with some material there
will be little or no effect when you select the different
options.
• The Late Night function is set to Off when the AV
receiver is set to Standby.
■ M.Optimizer
The Music Optimizer function enhances the sound quality of compressed music files. Use it with music files that
use “lossy” compression, such as MP3.
CinemaFILTER
■ Cinema Fltr
With the CinemaFILTER, you can soften overly bright
movie soundtracks, which are typically mixed for reproduction in a movie theater.
CinemaFILTER can be used with the following listening
modes: Dolby Digital, Dolby Digital EX, Dolby Pro
Logic IIx Movie, Dolby Pro Logic II Movie, DTS, DTSES, DTS Neo:6 Cinema, DTS 96/24, and Neo:6.
Off: CinemaFILTER off.
On: CinemaFILTER on.
Note:
• The CinemaFILTER may not work when used with
certain input sources.
Audyssey Dynamic EQ
■ DynamicEQ
With Audyssey Dynamic EQ, you can enjoy great sound
even when listening at low volume levels.
Audyssey Dynamic EQ solves the problem of deteriorating sound quality as volume is decreased by taking into
account human perception and room acoustics. It does so
by selecting the correct frequency response and surround
volume levels moment-by-moment so that the content
sounds the way it was created at any volume level--not
just at reference level.
Off: Audyssey Dynamic EQ off.
On: Audyssey Dynamic EQ on.
Note:
• Audyssey Dynamic EQ can be set only when the
Equalizer Settings on page 81 are set to Audyssey.
76
Off: Music Optimizer off (default).
On: Music Optimizer on.
Note:
• The Music Optimizer function only works with PCM
digital audio input signals with a sampling rate below
48kHz and analog audio input signals. The Music
Optimizer is disabled when the Direct listening mode
is selected.
Speaker Levels
You can adjust the volume of each speaker while listening to an input source.
These temporary adjustments are cancelled when the AV
receiver is set to Standby.
■ Subwoofer
You can adjust the level from –15 dB to +12 dB.
■ Center
You can adjust the level from –12 dB to +12 dB.
Notes:
• You cannot use this function while the AV receiver is
muted.
• Speakers that are set to No or None in the Speaker
Configuration cannot be adjusted (see page 77).
A/V Sync
■ A/V Sync
When using progressive scanning on your DVD player,
you may find that the picture and sound are out of sync.
With this setting, you can correct this by delaying the
audio signals. You can set it from 0 to 100 milliseconds
(ms) in 20 millisecond steps.
Note:
• This setting is not available when the Direct listening
mode is used with an analog input signal.
Advanced Setup
Speaker Setup
3
While the “Subwoofer” setting is
selected, use the Left and Right
[ ]/[ ] buttons to select Yes or
No.
Yes: Select if a subwoofer is connected.
No: Select if no subwoofer is connected.
4
Use the Down [ ] button to
select “Front,” and then use the
Left and Right [ ]/[ ] buttons to
select Small or Large.
Small: Select if the front speakers are
small.
Large: Select if the front speakers are
large.
This section explains how to check the speaker settings
and how to set them manually, which is useful if you
change a speaker after performing the automatic speaker
setup.
Some of the speaker settings are set automatically by the
Automatic Speaker Setup function (see page 42).
Speaker Configuration, Crossover Frequency,
and Double Bass settings only need to be
changed if you’re not using the speakers in
this package.
These settings cannot be changed while headphones are connected, speaker set B is on, or
the multichannel DVD input is being used.
Note:
• If the Subwoofer setting in step 3 is
set to No, this setting is fixed at Large
and does not appear.
Speaker Configuration
These settings are set automatically by the Automatic
Speaker Setup function (see page 42).
This section explains how to specify which speakers are
connected and their sizes.
For speakers with a cone diameter
larger than 6-1/2 inches (16 cm),
specify Large (full band). For those
with a smaller diameter, specify
Small (default crossover 100Hz).
The crossover frequency can be
Cone diameter
changed on page 78.
1
5
Note:
• If the Front setting in step 4 is set to
Small, the Large option cannot be
selected.
Press the [RECEIVER] button followed by the [SETUP] button.
6
2
Use the Up and Down [ ]/[ ]
buttons to select “Sp Config,”
and then press the [ENTER] button.
Use the Down [ ] button to
select “Center,” and then use the
Left and Right [ ]/[ ] buttons to
select Small, Large, or None.
Small: Select if the center speaker is
small.
Large: Select if the center speaker is
large.
None: Select if no center speaker is
connected.
Use the Down [ ] button to
select “Surround,” and then use
the Left and Right [ ]/[ ] buttons to select Small, Large, or
None.
Small: Select if the surround speakers are small.
Large: Select if the surround speakers are large.
None: Select if no surround speakers
are connected.
Note:
• If the Front setting in step 4 is set to
Small, the Large option cannot be
selected.
77
Advanced Setup—Continued
7
8
Use the Down [ ] button to
select “SurrBack,” and use the
Left and Right [ ]/[ ] buttons to
select Small, Large, or None.
Small: Select if the surround back
speakers are small.
Large: Select if the surround back
speakers are large.
None: Select if no surround back
speakers are connected.
Notes:
• If the Surround setting in step 6 is set
to None, or Powered Zone 2 is being
used, this setting does not appear.
• If the Surround setting in step 6 is set
to Small, the Large option cannot be
selected.
Use the Down [ ] button to
select “SurrBack ch,” and use the
Left and Right [ ]/[ ] buttons to
select 2ch or 1ch.
2ch: Select if two (left and right)
surround back speakers are
connected.
1ch: Select if one surround back
speaker is connected.
Note:
• If the Surround or SurrBack settings
in steps 6 and 8 are set to None, this
setting does not appear.
Continue with step 9 of the “Crossover
Frequency” setting.
Note:
• These settings cannot be changed while headphones
are connected or the multichannel DVD input is being
used.
78
Crossover Frequency
This setting is set automatically by the Automatic
Speaker Setup function (see page 42).
This setting only applies to the speakers that you specified as Small in the “Speaker Configuration” on page 77.
To get the best bass performance from your speaker system, you need to set the crossover frequency according
to the size and frequency response of your speakers
9
Use the Down [ ] button to
select “Crossover,” and then use
the Left and Right [ ]/[ ] buttons to select a crossover frequency.
Continue with step 10 of the “Double
Bass” setting on the next page.
Notes:
• For a more accurate setting, look up the frequency
response in the manuals supplied with your speakers
and set accordingly.
• Choose a higher crossover frequency if you want more
sound from your subwoofer.
• These settings cannot be changed while headphones
are connected or the multichannel DVD input is being
used.
Advanced Setup—Continued
Double Bass
3
Use the Up and Down [ ]/[ ]
buttons to select “Sp Distance,”
and then press [ENTER].
4
While “Unit” is displayed, use the
Left and Right [ ]/[ ] buttons to
select “feet” or “meters”.
feet: Distances can be set in feet.
Range: 1 to 30 feet in 1-foot
steps.
meters: Distances can be set in
meters. Range: 0.3 to 9
meters in 0.3-meter steps.
5
Use the Down [ ] button to
select “Front” and use the Left
and Right [ ]/[ ] buttons to
specify the distance for the front
speakers, then press the Down
[ ] button to select the next
speaker.
6
Repeat step 5 for all speakers.
Note:
Speakers that you set to No or None in
the Speaker Configuration (page 77)
cannot be selected.
7
Press the [SETUP] button.
Setup closes.
This setting is not set automatically by the Automatic
Speaker Setup function (see page 42).
With the Double Bass function, you can boost bass output by feeding bass sounds from the front left, right, and
center channels to the subwoofer. This function can be
set only if the Subwoofer setting (step 3) is set to Yes,
and the Front setting (step 4) is set to Large in the
Speaker Configuration on page 77.
10
11
Use the Down [ ] button to
select “Double Bass (D.Bass),”
and then use the Left and Right
[ ]/[ ] buttons to select:
On: Double Bass function on.
Bass from the front left and
right channels is also fed to
the subwoofer (default).
Off: Double Bass function off.
Press the [SETUP] button.
Setup closes.
Note:
• These settings cannot be changed while headphones
are connected, speaker set B is on, or the multichannel
DVD input is being used.
Speaker Distance
These settings are set automatically by the Automatic
Speaker Setup function (see page 42).
With these settings, you can specify the distance from
each speaker to the listening position.
1
Measure and make a note of the
distance from each speaker to
the listening position.
2
Press the [RECEIVER] REMOTE
MODE button, followed by the
[SETUP] button.
Notes:
• The Center and Subwoofer distances can be set up to
5 ft. (1.5 m) more or less than the Left distance. For
example, if the Left distance is set to 20 ft. (6 m), the
Center and Subwoofer distances can be set between 15
and 25 ft. (4.5 and 7.5 m).
• The Surround and Surround Back distances can be set
up to 5 ft. (1.5 m) more or 15 ft. (4.5 m) less than the
Left distance. For example, if the Left distance is set
to 20 ft. (6 m), the SurrRight, Surr Left, Surr Back R,
and Surr Back L distances can be set between 5 and 25
ft. (1.5 and 7.5 m).
• The speaker distance cannot be adjusted while a pair
of headphones is connected or the multichannel DVD
input is being used.
79
Advanced Setup—Continued
Speaker Levels
These settings are set automatically by the Automatic
Speaker Setup function (see page 42).
6
Press the [SETUP] button.
Setup closes.
Don’t forget to turn down the volume if
you turned it up while setting the levels.
You can set the volume level of each speaker so that all
speakers can be heard equally at the listening position.
80
1
Press the [RECEIVER] REMOTE
MODE button, followed by the
[SETUP] button.
2
Use the Up and Down [ ]/[ ]
buttons to select “Level Cal,” and
then press [ENTER].
A pink noise test tone is output by the
front left speaker.
3
Turn up the volume so that you
can hear the test tone sufficiently.
As each speaker outputs the test tone,
its name appears on the display.
4
Use the Left and Right [ ]/[ ]
buttons to adjust the speaker
level, and use the Down [ ] button to select the next speaker.
The levels can be adjusted from –12 to
+12 dB in 1 dB steps (–15 to +12 dB
for the subwoofer).
5
Repeat step 4 so that the level of
the test tone coming from each
speaker is the same.
Speakers that you set to No or None in
the Speaker Configuration (page 77) do
not output the test tone.
Note:
• The speaker levels cannot be adjusted while a pair of
headphones is connected or the AV receiver is muted.
• While speaker set B is on, you can adjust the volume
of the left and right speakers, from –12 dB to +12 dB.
• While speaker set B is on, you cannot adjust the levels
of speaker set A’s surround back speakers.
Advanced Setup—Continued
Equalizer Settings
5
These settings are set automatically by the Automatic
Speaker Setup function (see page 42).
Here you can adjust the tone of individual speakers. To
set the volume of individual speakers, see page 80.
1
Press the [RECEIVER] REMOTE
MODE button, followed by the
[SETUP] button.
2
Use the Up and Down [ ]/[ ]
buttons to select “Equalizer,” and
then press [ENTER].
3
Use the Left and Right [ ]/[ ]
buttons to select:
Off: Tone off, response flat.
Audyssey: The tone for each speaker
is set automatically by the
Automatic Speaker Setup
function. Be sure to select
this setting after having
performed the Automatic
Speaker Setup.
Manual: You can adjust the equalizer for each speaker
manually.
If you selected Manual, continue with
this procedure. If you selected Off or
Audyssey, go to step 7.
4
Use the Up and Down [ ]/[ ]
buttons to select a frequency.
Use the Left and Right [ ]/[ ]
buttons to adjust the level at that
frequency.
The volume at each frequency can be
adjusted from –6 to +6 dB in 1 dB
steps.
Tip: Low frequencies (e.g., 63Hz,
80Hz) affect bass sounds; high frequencies (e.g., 8000Hz, 16000Hz) affect treble sounds.
6
Use the Up [ ] button to select
“Ch,” and then use the Left and
Right [ ]/[ ] buttons to select
another speaker.
Repeat steps 4 and 5 for each speaker.
Speakers that you’ve set to No or None
in the Speaker Configuration (page 77)
cannot be selected.
7
Press the [SETUP] button.
The setup menu closes.
Notes:
• The front, center, surround, and surround back speakers can be adjusted at 80Hz, 250Hz, 800Hz, 2500Hz,
and 8000Hz. The subwoofer can be adjusted at 40Hz,
80Hz, and 160Hz.
• While the Direct listening mode is selected, the equalizer settings have no effect.
• This procedure can also be performed on the AV
receiver by using its [SETUP], [ENTER], and arrow
buttons.
Press the Down [ ] button, and
then use the Left and Right
[ ]/[ ] buttons to select a
speaker.
81
Controlling Other Components
You can control your DVD player, CD player, and other
components with the AV receiver’s remote controller.
To control another component, you must first enter that
component’s remote control code to a REMOTE MODE
button.
This section explains how to enter remote control codes
and how to control your other components.
1
Look up the component’s remote
control code in the separate
Remote Control Codes list.
The codes are organized by category.
2
While holding down the REMOTE
MODE button to which you want
to enter a code, press and hold
down the [DISPLAY] button until
the Remote indicator lights up
(about 3 seconds).
Preprogrammed Remote Control
Codes
The following REMOTE MODE buttons are preprogrammed with remote control codes for controlling the
components listed. You do not need to enter a remote
control code to control these components.
For details on controlling these components, see the
pages indicated.
Onkyo DVD player (page 84)
Onkyo CD player (page 87)
Onkyo cassette recorder with
(3 seconds)
(page 88)
Entering Remote Control Codes
You’ll need to enter a code for each component that you
want to control.
Remote
indicator
DISPLAY
REMOTE
MODE
RECEIVER
Number
buttons
82
3
Note:
• Remote control codes cannot be
entered for the [RECEIVER]
REMOTE MODE button.
• Only TV remote control codes can be
entered for the [TV] REMOTE
MODE button.
• Apart from the [RECEIVER] and
[TV] REMOTE MODE buttons,
remote control codes from any category can be entered for the REMOTE
MODE buttons. However, these buttons also work as input selector buttons (page 47), so choose a
REMOTE MODE button that corresponds with the input to which you
connect your component. For example, if you connect your CD player to
the CD input, choose the [CD]
REMOTE MODE button when
entering its remote control code.
Within 30 seconds, use the number buttons to enter the 5-digit
remote control code.
The Remote indicator flashes twice.
If the remote control code is not entered
successfully, the Remote indicator will
flash once slowly.
Notes:
• The remote control codes provided are correct at the
time of printing but subject to change.
• Only RI Docks with a remote control sensor, such as
the DS-A2 and DS-A2X, can be controlled with the
AV receiver’s remote controller and the appropriate
remote control code.
Controlling Other Components—Continued
Remote Control Codes for Onkyo
Components Connected via
Resetting the REMOTE MODE Buttons
Onkyo components that are connected via
are controlled by pointing the remote controller at the AV
receiver, not the component. This allows you to control
components that are out of view, in a rack, for example.
1
Make sure the Onkyo component is connected with an
cable and an analog
audio cable (RCA).
See page 40 for details.
2
Enter the appropriate remote control code
to the REMOTE MODE button.
You can reset a REMOTE MODE button to its default
remote control code.
1
While holding down the REMOTE
MODE button that you want to
reset, press and hold down the
[AUDIO] button until the Remote
indicator lights up (about 3 seconds).
• [DVD] REMOTE MODE button
31612: Onkyo DVD player with
• [CD] REMOTE MODE button
71327: Onkyo CD player with
(3 seconds)
• [TAPE] REMOTE MODE button
42157: Onkyo cassette recorder with
(default)
2
See the previous page for how to enter remote
control codes.
3
Press the REMOTE MODE button, point
the remote controller at the AV receiver,
and operate the component.
If you want to control an Onkyo component by pointing
the remote controller directly at it, or you want to control
an Onkyo component that’s not connected via
, use
the following remote control codes:
• [DVD] REMOTE MODE button
30627: Onkyo DVD player without
• [CD] REMOTE MODE button
71817: Onkyo CD player without
Within 30 seconds, press the
REMOTE MODE button again.
The Remote indicator flashes twice,
indicating that the button has been
reset.
Each of the REMOTE MODE buttons
is preprogrammed with a remote control code. When a button is reset, its
preprogrammed code is restored.
Resetting the Remote Controller
You can reset the remote controller to its default settings.
(default)
1
(default)
While holding down the
[RECEIVER] REMOTE MODE button, press and hold down the
[AUDIO] button until the Remote
indicator lights up (about 3 seconds).
(3 seconds)
2
Within 30 seconds, press the
[RECEIVER] REMOTE MODE button again.
The Remote indicator flashes twice,
indicating that the remote controller
has been reset.
83
Controlling Other Components—Continued
Controlling a DVD Player, or DVD Recorder
By pressing the REMOTE MODE button that’s been
programmed with the remote control code for your DVD
player (HD DVD, Blu-ray, or TV/DVD combination),
you can control your player with the following buttons.
A ON/STANDBY button
The [DVD] REMOTE MODE button is preprogrammed
with the remote control code for controlling an Onkyo
DVD player.
C TV [INPUT] button
For details on entering a remote control code for a different component, see page 82.
Sets the DVD player to On or Standby.
B TV [
] button
Set the TV to On or Standby.
Selects the TV’s external inputs.
D TV VOL [ ]/[ ] button
Adjust the TV’s volume.
E TOP MENU button
Displays a DVD’s top menu or a DVD’s title.
F Arrow [ ]/[ ]/[ ]/[ ] and ENTER buttons
Press the appropriate
REMOTE MODE button first
Used to navigate menus and select items.
G SETUP button
Used to access the DVD player’s settings.
L
A
From left to right: Previous, Rewind, Pause, Play,
Stop, Fast Forward, and Next.
DVD
M
N
B
C
D
E
O
P
F
G
H Playback buttons
Q
R
H
I REPEAT button
Used with the repeat playback function.
J SEARCH buttons
Used to search title, chapter, and track numbers, and
to search times for locating specific points.
K Number buttons
Used to enter title, chapter, and track numbers, and
to enter times for locating specific points. The [+10]
button works as a +10 button or “-.--” button.
L DISPLAY button
Displays information about the current disc, title,
chapter, or track, including elapsed time, remaining
time, total time, and so on.
M MUTING button (48)
I
S
J
T
Mutes or unmutes the AV receiver.
N DISC +/–, CH +/– button
Selects discs on a DVD changer. Selects TV channels on a component with a built-in tuner.
O VOL [ ]/[ ] button (47)
K
Adjusts the volume of the AV receiver.
U
P MENU button
Displays a DVD’s menu.
Q RETURN button
Exits the DVD player’s setup menu or return to the
previous menu.
R AUDIO button
Selects foreign language soundtracks and audio formats (e.g., Dolby Digital or DTS).
*
84
With some components, certain buttons may not
work as expected, and some may not work at all.
S RANDOM button
Used with the random playback function.
Controlling Other Components—Continued
T PLAY MODE button
Selects play modes on components with selectable
play modes.
U CLR button
Cancels functions and clears entered numbers.
Note:
• If you enter the remote control code for a HD DVD or
Blu-ray player that has A, B, C, and D buttons, the
[SEARCH], [REPEAT], [RANDOM], and [PLAY
MODE] buttons will work as the A (red), B (green), C
(blue), and D (yellow) buttons respectively. In this
case, these buttons cannot be used to set repeat playback, random playback, or select play modes.
Controlling a VCR, or PVR
By pressing the REMOTE MODE button that’s been
programmed with the remote control code for your VCR
(TV/VCR, PVR, DBS/PVR combination or cable/PVR
combination), you can control your video recorder with
the following buttons.
For details on entering a remote control code for a different component, see page 82.
A ON/STANDBY button
Set the video recorder to On or Standby.
B TV [
] button
Set the TV to On or Standby.
C TV [INPUT] button
Selects the TV’s external inputs.
D TV VOL [ ]/[ ] button
Adjust the TV’s volume.
E GUIDE button
Press the appropriate
REMOTE MODE button first
Displays the program guide or navigation list.
F Arrow [ ]/[ ]/[ ]/[ ] and ENTER buttons
J
A
G SETUP button
Displays the video recorders setup menu.
VCR/DVR
K
L
B
C
D
E
Used to navigate menus and select items.
M
N
F
H Previous [
] button
Previous or instant replay function.
I Number buttons
Enter numbers. The [0] button enters 11 on some
components. The [+10] button works as a +10 button or “-.--” button.
J DISPLAY button
Displays information.
G
O
H
P
Q
K MUTING button (48)
Mutes or unmutes the AV receiver.
L CH +/– button
Selects TV channels on the video recorder.
M VOL [ ]/[ ] button (47)
Adjusts the volume of the AV receiver.
N PREV CH button
Selects the previous channel.
O RETURN button
Exits the menu or return to the previous menu.
I
P Next [
R
] button
Next or advance function.
Q Playback buttons
From left to right: Previous, Next, Rewind, Play,
Fast Forward, Pause, and Stop.
*
With some components, certain buttons may not
work as expected, and some may not work at all.
R CLR button
Cancels functions or enters the number 12.
85
Controlling Other Components—Continued
Controlling a Satellite Receiver or Cable Receiver
By pressing the REMOTE MODE button that’s been
programmed with the remote control code for your satellite receiver, cable receiver, or DVD recorder
(DBS/PVR combination or cable/PVR combination),
you can control your player with the following buttons.
For details on entering a remote control code for a different component, see page 82.
A ON/STANDBY button
Set the component to On or Standby.
B GUIDE button
Displays the onscreen program guide.
C Arrow [ ]/[ ]/[ ]/[ ] and ENTER buttons
Used to navigate menus and select items.
D SETUP button
Displays the setup menu.
E REPEAT button
Press the appropriate
REMOTE MODE button first
Works as the green (B) button.
F SEARCH button
A
H
CBL/SAT
B
G Number buttons
Enter numbers. The [+10] button works as a +10
button or “-.--” button.
I
J
H DISPLAY button
K
I MUTING button (48)
L
Displays information.
Mutes or unmutes the AV receiver.
J CH +/– button
Selects satellite/cable channels.
K VOL [ ]/[ ] button (47)
C
D
Works as the red (A) button.
M
N
J
O
E
P
F
Q
Adjusts the volume of the AV receiver.
L PREV CH button
Selects the previous channel.
M RETURN button
Exits the menu.
N AUDIO button
Selects foreign language soundtracks and audio formats (e.g., Dolby Digital or DTS).
O Playback buttons
From left to right: Previous, Next, Rewind, Play,
Fast Forward, Pause, and Stop.
G
R
P RANDOM button
Works as the blue (C) button.
Q PLAY MODE button
Works as the yellow (D) button.
R CLR button
Cancels functions and clears entered numbers.
*
86
With some components, certain buttons may not
work as expected, and some may not work at all.
Controlling Other Components—Continued
Controlling a CD Player, CD Recorder, or MD Player
By pressing the REMOTE MODE button that’s been
programmed with the remote control code for your CD
player, CD recorder, or MD player, you can control your
player with the following buttons.
A ON/STANDBY button
The [CD] REMOTE MODE button is preprogrammed
with the remote control code for controlling an Onkyo
CD player.
C Arrow [ ]/[ ]/[ ]/[ ] and ENTER buttons
For details on entering a remote control code for a different component, see page 82.
Set the component to On or Standby.
B TOP MENU button
Displays a menu.
Used to navigate menus and select items.
D SETUP button
Used to access the Onkyo CD player’s settings.
E Playback buttons
From left to right: Previous, Rewind, Pause, Play,
Stop, Fast Forward, and Next.
Press the appropriate
REMOTE MODE button first
F REPEAT button
Used with the repeat playback function.
A
I
CD
J
K
L
B
Used to locate specific points.
H Number buttons
Used to enter track numbers and times for locating
specific points. The [+10] button works as a +10
button or “-.--” button.
I DISPLAY button
Displays information about the current disc or track,
including elapsed time, remaining time, total time,
and so on.
J DISC +/– button
C
D
G SEARCH button
Selects discs on a CD changer.
M
K RETURN button
Exits the CD player’s setup menu.
L RANDOM button
Used with the random playback function.
E
M PLAY MODE button
F
N
G
O
Selects play modes on components with selectable
play modes.
N CLR button
Cancels functions and clears entered numbers.
H
P
*
With some components, certain buttons may not
work as expected, and some may not work at all.
87
Controlling Other Components—Continued
Controlling a Cassette Recorder
By pressing the REMOTE MODE button that’s been
programmed with the remote control code for your cassette recorder, you can control your cassette recorder
with the following buttons.
The [TAPE] REMOTE MODE button is preprogrammed
with the remote control code for controlling an Onkyo
cassette recorder when used with an
connection.
For details on entering a remote control code for a different component, see page 82.
On twin cassette decks, only Deck B can be controlled.
A ON/STANDBY button
Turns the cassette recorder on or off.
B Previous and Next [
]/[
] buttons
The Previous [
] button selects the previous
track. During playback it selects the beginning of
the current track. The Next [
] button selects the
next track.
Depending on how they were recorded, the Previous
and Next [
]/[
] buttons may not work properly with some cassette tapes.
C Rewind and Fast Forward [
Press the appropriate
REMOTE MODE button first
]/[ ] buttons
The Rewind [ ] button starts rewind. The Fast
Forward [ ] button starts fast forward.
D Reverse Play [ ] button
A
Starts reverse playback.
E Play [ ] button
TAPE
F
Starts playback.
F MUTING button (48)
Mutes or unmutes the AV receiver.
G
G VOL [ ]/[ ] button (47)
Adjusts the volume of the AV receiver.
H Stop [ ] button
Stops playback.
Note:
• An Onkyo cassette recorder connected via
also be controlled in Receiver mode.
2
2
3
4
3
H
5
*
88
With some components, certain buttons may not
work as expected, and some may not work at all.
can
Controlling Other Components—Continued
Controlling a TV
By pressing the [TV] REMOTE MODE button that’s
been programmed with the remote control code for your
TV (TV/DVD combination or TV/VCR combination),
you can control your TV with the following buttons.
A ON/STANDBY, TV [
For details on entering a remote control code for a different component, see page 82.
C TV [INPUT]* button
] buttons
Set the TV to On or Standby.
B TV VOL [ ]/[ ]*
Adjust the TV’s volume.
Selects the TV’s external inputs.
D GUIDE button
Press [TV] REMOTE MODE
button first
Displays the program guide.
E Arrow [ ]/[ ]/[ ]/[ ] and ENTER buttons
Used to navigate menus and select items.
K
A
F SETUP button
Displays a menu.
G Playback buttons
TV
L
A
B
C
D
M
From left to right: Previous, Rewind, Pause, Play,
Stop, Fast Forward, and Next.
These buttons works for combination devices.
H REPEAT button
Selects B (green).
N
E
I SEARCH button
Selects A (red).
J Number buttons
F
O
P
Enter numbers. 0 button enters 11 on some components. +10 button works as “-.--” button or +10.
K DISPLAY button
Displays information.
G
L MUTING button
H
Q
I
R
Mutes the TV.
M CH +/– button
Select channels on the TV.
N PREV CH button
J
Selects the previous or last channel.
O RETURN button
S
Exits the TV’s setup menu.
P AUDIO button
Selects foreign language soundtracks and audio formats (e.g., Dolby Digital or DTS).
Q RANDOM button
Selects C (blue).
R PLAY MODE button
Selects D (yellow).
*
With some components, certain buttons may not
work as expected, and some may not work at all.
S CLR button
Cancels functions and clears entered numbers, or
enters 12.
89
Troubleshooting
If you have any trouble using the AV receiver, look for a
solution in this section. If you can’t resolve the issue
yourself, contact your Onkyo dealer.
If you can’t resolve the issue yourself, try resetting
the AV receiver before contacting your Onkyo dealer.
To reset the AV receiver to its factory defaults,
turn it on and, while holding down the [VCR/DVR]
button, press the [ON/STANDBY] button. “Clear”
will appear on the display and the AV receiver will
enter Standby mode.
ON/STANDBY
VCR/DVR
Note that resetting the AV receiver will delete your
radio presets and custom settings.
Power
Can’t turn on the AV receiver
• Make sure that the power cord is plugged into the wall
outlet properly.
• Unplug the power cord from the wall outlet, wait 5
seconds or more, then plug it back in again.
The AV receiver turns off as soon as it’s turned
on
• The amp protection circuit has been activated.
Remove the power cord from the wall outlet immediately. Disconnect all speaker cables and input sources,
and leave the AV receiver with its power cord disconnected for 1 hour. After that, reconnect the power cord
and set the volume to maximum. If the AV receiver
stays on, set the volume to minimum, disconnect the
power cord, and reconnect your speakers and input
sources. If the AV receiver turns off when you set the
volume to maximum, disconnect the power cord, and
contact your Onkyo dealer.
Audio
There’s no sound or it’s very quiet
• To listen to an audio source that’s connected to an
HDMI input, make sure that input is assigned to an
input selector (page 44). HDMI audio is passed
through the AV receiver and can only be heard from
your TV.
• To listen to an audio source that’s connected to an
OPTICAL or COAXIAL input, make sure that input is
assigned to an input selector (page 46).
• Make sure that all audio connecting plugs are pushed
in all the way (page 27).
• Make sure that the polarity of the speaker cables is
correct, and that the bare wire is in contact with the
metal part of each speaker terminal (page 22).
• Make sure that the speaker cables are not shorting.
90
• Check the volume (page 47). The AV receiver is
designed for home theater enjoyment and has a wide
volume range for precise adjustment.
• If the MUTING indicator is flashing on the display,
press the remote controller’s [MUTING] button to
unmute the AV receiver (page 48).
• While a pair of headphones is connected to the
PHONES jack, no sound is output by the main room
speakers (page 49).
• Check the digital audio output settings on the source
component. On some game consoles, such as those
that can play DVDs, the default setting is off.
• With some DVD-Video discs, you need to select an
audio format from a menu or with the AUDIO button
on your DVD player’s remote controller.
• If your turntable doesn’t have a phono preamp built-in,
you must connect one between it and the AV receiver.
• If your turntable uses an MC cartridge, you must connect an MC head amp, or an MC transformer and a
phono preamp.
• Check the speaker settings (pages 77–81).
• If the digital signal format is set to PCM or DTS, set it
to Auto (page 50).
• If there’s no sound from a DVD player connected to an
HDMI IN, check the DVD player’s output settings,
and be sure to select a compatible audio format.
Only the front speakers produce sound
• When the Stereo or Mono listening mode is selected,
only the front speakers and subwoofer produce sound.
• Check the Speaker Configuration (page 77).
Only the center speaker produces sound
• If you use the Dolby Pro Logic IIx Movie or Dolby
Pro Logic IIx Music listening mode with a mono
source, such as an AM radio station or mono TV program, the sound will be concentrated in the center
speaker.
• Check the Speaker Configuration (page 77).
The center speaker produces no sound
• When the Stereo or Mono listening mode is selected,
the center speaker produces no sound (page 71).
• Check the Speaker Configuration (page 77).
The surround speakers produce no sound
• When the Stereo or Mono listening mode is selected,
the surround speakers produce no sound.
• Depending on the source and the current listening
mode, not much sound may be produced by the surround speakers. Try another listening mode (page 67).
• Check the Speaker Configuration (page 77).
Troubleshooting—Continued
The surround back speakers produce no sound
• The surround back speakers are not used with all listening modes. Try another listening mode (page 67).
• Not much sound may be produced by the surround
back speakers with some sources.
• Check the Speaker Configuration (page 77).
• While speaker set B is on, playback is reduced to 5.1channels and the surround back speakers produce no
sound (page 7).
The subwoofer produces no sound
• If the source material contains no audio in the LFE
channel, the subwoofer produces no sound.
• Check the Speaker Configuration (page 77).
There’s no sound with a certain signal format
• Check the digital audio output setting on the source
component. On some game consoles, such as those
that can play DVDs, the default setting is off.
• With some DVD-Video discs, you need to select an
audio format from a menu or with the AUDIO button
on your DVD player’s remote controller.
Can’t get 6.1- or 7.1-channel playback
• While speaker set B is on, playback in the main room
is reduced to 5.1-channels and the surround back
speakers produce no sound (page 7).
The volume cannot be set to 79 (99)
• After the Automatic Speaker Setup function has been
run, or the volume level of each individual speaker has
been adjusted (pages 42 and 80), the maximum volume may be reduced.
• When the levels of each speaker have been adjusted
(page 80), the maximum possible volume may be
reduced.
Noise can be heard
• Using cable ties to bundle audio cables with power
cords, speaker cables, and so on can degrade audio
performance, so don’t use them.
• An audio cable may be picking up interference. Try
repositioning your cables.
• When the Equalizer setting (page 81) is set to Audyssey, the maximum possible volume is reduced by
6 dB.
The Late Night function doesn’t work
• Make sure that the source is Dolby Digital (page 76).
The analog multichannel input doesn’t work
• Check the multichannel input connections (page 31).
• Make sure that the multichannel input is selected
(page 47).
• Check the audio output settings on your DVD player.
ing mode and the DTS indicator remains on. This is to
prevent noise when you use the pause, fast forward, or
fast reverse function on your player. If you switch your
player from DTS to PCM, as the AV receiver does not
switch formats immediately, you may not hear anything, in which case you should stop your player for
about 3 seconds, and then resume playback.
• With some CD players, you won’t be able to playback
DTS material properly even though your player is connected to a digital input on the AV receiver. This is
usually because the DTS bitstream has been processed
(e.g., output level, sampling rate, or frequency
response changed) and the AV receiver doesn’t recognize it as a genuine DTS signal. In such cases, you
may hear noise.
The beginning of audio received by an HDMI IN
can’t be heard
• Since it takes longer to identify the format of an
HDMI signal than it does for other digital audio signals, sound may not be output immediately.
Video
There’s no picture
• Make sure that all video connecting plugs are pushed
in all the way (page 27).
• Make sure that each video component is properly connected.
• On your TV, make sure that the video input to which
the AV receiver is connected is selected.
• While the Pure Audio listening mode is selected, the
video circuitry is turned off and only the HDMI OUT
outputs video signals.
• The AV receiver does not convert between formats, so
if a video source component is connected to a component video input, your TV must be connected to the
component video output (page 28).
• If the video source is connected to an HDMI input,
your TV must be connected to the HDMI OUT
(page 28).
There’s no picture from a source connected to
an HDMI IN
• Reliable operation with an HDMI-to-DVI adapter is
not guaranteed. In addition, video signals from a PC
are not supported (page 36).
• If the message “Resolution Error” appears on the AV
receiver’s display, this indicates that your TV does not
support the current video resolution and you need to
select another resolution on your DVD player.
About DTS signals
• When playing DTS program material, using the pause,
fast forward, or fast reverse function on your player
may produce a short audible noise. This is not a malfunction.
• When DTS program material ends and the DTS bitstream stops, the AV receiver remains in DTS listen-
91
Troubleshooting—Continued
Tuner
Reception is noisy, stereo FM reception suffers
from hiss, or the FM STEREO indicator doesn’t
light up
• Relocate your antenna.
• Move the AV receiver away from your TV or computer.
• When listening to an AM station, operating the remote
controller may cause noise.
• Passing cars and airplanes can cause interference.
• Concrete walls weaken radio signals.
• If nothing improves the reception, install an outdoor
antenna.
Remote Controller
The remote controller doesn’t work
• Make sure that the batteries are installed with the correct polarity (page 20).
• Make sure that the remote controller is not too far
away from the AV receiver and there’s no obstruction
between the remote controller and the AV receiver’s
remote control sensor (page 20).
• Make sure you’ve selected the correct remote controller mode.
• Make sure you’ve entered the correct remote control
code (page 82).
Can’t control other components
• Make sure you’ve selected the correct remote controller mode.
• If you’ve connected an
-capable Onkyo MD
recorder or CD recorder to the TAPE IN/OUT jacks,
or to the CBL/SAT IN jacks, for the remote controller
to work properly, you must set the Input Display to
MD or CDR, respectively (see page 46).
• The entered remote control code may not be correct. If
more than one code is listed, try each one.
• With some AV components, certain buttons may not
work as expected, and some may not work at all.
• To control an Onkyo component that’s connected via
, point the remote controller at the AV receiver. Be
sure to enter the appropriate remote control code first
(page 83).
• To control an Onkyo component that’s not connected
via
, or another manufacturer’s component, point
the remote controller at that component. Be sure to
enter the appropriate remote control code first
(page 82).
Recording
Can’t record
• On your recorder, make sure the correct input is
selected.
• To prevent signal loops and damage to the AV
receiver, input signals are not fed through to outputs
92
with the same name (e.g., TAPE IN to TAPE OUT or
VCR/DVR IN to VCR/DVR OUT).
Others
The sound changes when I connect my headphones
• When a pair of headphones is connected, the listening
mode is set to Stereo, unless it’s already set to Stereo,
Mono, or Direct, in which case it stays the same.
How do I change the language of a multiplex
source
• On the “Audio Adjust” menu, change the “Input
(Mux)” setting to Main or Sub (page 74).
The
functions don’t work
• To use
, you must make an
connection and an
analog audio connection (RCA) between the component and AV receiver, even if they are connected digitally (page 40).
The following settings can be made for the
S-Video and composite video inputs
You must use the buttons on the unit to make these settings.
1. While holding down the input selector button for the
input source that you want to set, press the [SETUP]
button.
2. Use the Left and Right [ ]/[ ] buttons to change
the setting.
3. Press the [SETUP] button when you’ve finished.
• Video Attenuation
This setting can be made for the DVD, VCR/DVR,
CBL/SAT, or AUX input.
If you have a games console connected to the
S-Video or composite video input, and the picture
isn’t very clear, you can attenuate the gain.
Video ATT:0: (default).
Video ATT:2: Gain is reduced by 2 dB.
The AV receiver contains a microcomputer for signal processing and control functions. In very rare situations,
severe interference, noise from an external source, or
static electricity may cause it to lockup. In the unlikely event
that this happens, unplug the power cord from the wall outlet, wait at least 5 seconds, and then plug it back in again.
Onkyo is not responsible for damages (such as CD
rental fees) due to unsuccessful recordings caused by
this unit’s malfunction. Before you record important
data, make sure that the material will be recorded correctly.
Before disconnecting the power cord from the wall outlet, set the AV receiver to Standby.
Specifications
HT-R560
Amplifier Section
General
Rated Output Power
North American:
110 watts minimum continuous power per channel, 8 ohm
loads, 2 channels driven, with a maximum total harmonic
distortion of 0.9% (FTC)
European:
7 ch × 130 W at 8 ohms, 1kHz, 1 ch driven (IEC)
Dynamic Power
210 W (3Ω, Front) (1 ch driven)
190 W (4Ω, Front) (1 ch driven)
130 W (8Ω, Front) (1 ch driven)
THD (Total Harmonic
Distortion)
0.08% (1kHz 1W) (Power Rated)
Damping Factor
60 (Front, 1kHz, 8Ω)
Input Sensitivity and
Impedance
200 mV/ 47 kΩ (LINE)
Output Level and
Impedance
200 mV/ 2.2 kΩ (REC OUT)
Frequency Response
5Hz–100kHz/ +1 dB–3 dB
Tone Control
±10 dB, 50Hz (BASS)
±10 dB, 20kHz (TREBLE)
Signal to Noise Ratio
100 dB (LINE, IHF-A)
Speaker Impedance
8Ω–16Ω
Power Supply
North American:
European:
Power Consumption
North American:
European:
Dimensions
(W × H × D)
Video Section
HDMI
Component
Composite
S-Video
Input Sensitivity/Output
Level and Impedance
1 Vp-p /75Ω (Component and S-Video Y)
0.7 Vp-p /75Ω (Component Pb/Cb, Pr/Cr)
0.28 Vp-p /75Ω (S-Video C)
1 Vp-p /75Ω (Composite)
Component Video
Frequency Response
5Hz – 50MHz, –3 dB
Weight
North American:
European and Asian:
HDMI (Assignable)
Component
Composite
S-Video
Tuning Frequency Range
North American:
87.50MHz–107.90MHz
European:
87.50MHz–108.00MHz
■ AM
Tuning Frequency Range
North American:
530kHz–1710kHz
European:
522kHz–1611kHz
9.8 kg
21.63 lbs.
10.6 kg
23.40 lbs.
IN 1, IN 2, IN 3
IN 1, IN 2
DVD, CBL/SAT, VCR/DVR, AUX
DVD, VCR/DVR, CBL/SAT
OUT
OUT
MONITOR, VCR/DVR
MONITOR, VCR/DVR
■ Audio Inputs
Digital Inputs
(Assignable)
1 (VCR/DVR),
2 (CD) (Rear OPT)-(Front OPT)
1 (DVD), 2 (CBL/SAT) (Rear coax)
DVD (MULTI CH), VCR/DVR,
CBL/SAT, TAPE, CD, AUX, DOCK
7.1 ch
■ Audio Outputs
Analog Outputs
VCR/DVR, TAPE
Subwoofer Pre Outputs 1
Speaker Outputs
SP-A (L, R), C, SL, SBL, SBR,
SP-B (L, R)
Phones
PHONES
■ Control Terminal
MIC
Preset Channel
435 × 150 × 377 mm
17-1/8" × 5-7/8"× 14-13/16"
■ Video Outputs
Multichannel Inputs
■ FM
4.9 A
480 W
■ Video Inputs
Analog Inputs
Tuner Section
AC 120 V, 60Hz
AC 230 V, 50Hz
Yes
40
Specifications and features are subject to change without
notice.
93
Specifications—Continued
7.1ch Home Theater Speaker Package
■ Subwoofer (SKW-560)
Type:
Bass-reflex
Input sensitivity/
Impedance:
140 mV/20 kΩ
Maximum output power: 290 W
Frequency response:
25 Hz–150 Hz
Cabinet capacity:
1.34 cubic feet (38 L)
Dimensions
283 × 498 × 399 mm
(W × H × D):
(11-1/8" × 19-5/8" × 15-11/16")
(incl. grille and projection)
Weight:
11.5 kg (25.4 lbs.)
Drivers unit:
25 cm Cone
Power supply
North American:
AC 120 V/ 60 Hz
European:
AC 220-230 V/ – 50 Hz
Power consumption
North American:
163 W
European:
202 W
■ Front Speaker (SKF-560F)
Type:
Impedance:
Maximum input power:
Sensitivity:
Frequency response:
Crossover frequency:
Cabinet capacity:
Dimensions
(W × H × D):
Weight:
Drivers unit:
Terminal:
Keyhole slot:
Grille:
Other:
2 Way Bass-reflex
8Ω
130 W
85 dB/W/m
35 Hz–50 kHz
4 kHz
0.24 cubic feet (6.9 L)
155 × 371 × 198 mm
(6-1/8" × 14-5/8" × 7-13/16")
(incl. grille and projection)
2.9 kg (6.4 lbs.)
12 cm OMF Cone (Woofer)
2.5 cm Balanced dome (Tweeter)
Spring type color coded
1
Detachable
Magnetic shielding
■ Center Speaker (SKC-560C)
Type:
Impedance:
Maximum input power:
Sensitivity:
Frequency response:
Crossover frequency:
Cabinet capacity:
Dimensions
(W × H × D):
Weight:
Drivers unit:
Terminal:
Keyhole slot:
Grille:
Other:
94
2 Way Bass-reflex
8Ω
130 W
85 dB/W/m
60 Hz–50 kHz
4.5 kHz
0.11 cubic feet (3.2 L)
436 × 105 × 132 mm
(17-3/16" × 4-1/8" × 5-3/16")
(incl. grille and projection)
2.6 kg (5.7 lbs.)
8 cm OMF Cone (Woofer) × 2
2.5 cm Balanced dome (Tweeter)
Spring type color coded
2
Detachable
Magnetic shielding
■ Surround/Surround Back Speaker
(SKM-560S/SKB-560)
Type:
Impedance:
Maximum input power:
Sensitivity:
Frequency response:
Cabinet capacity:
Dimensions
(W × H × D):
Weight:
Drivers unit:
Terminal:
Keyhole slot:
Grille:
Full-Range closed box
8Ω
130 W
81 dB/W/m
80 Hz–20 kHz
0.057 cubic feet (1.6 L)
151 × 271 × 96 mm
(5-15/16" × 10-11/16" × 3-3/4")
(incl. grille and projection)
1.3 kg (2.86 lbs.)
8 cm Cone
Spring type color coded
1
Fixed
Dock DS-A1L
Power supply:
Consumption:
Dimensions
(W × H × D):
Weight:
DC 5 V 500 mA
2.5 W Max.
112 × 60 × 112 mm
(4-7/16" × 2-3/8" × 4-7/16")
0.3 kg (0.7 lbs.)
Specifications and features are subject to change without
notice.
Memo
95
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 072-831-8023 Fax: 072-831-8163
ONKYO U.S.A. CORPORATION
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/
ONKYO EUROPE ELECTRONICS GmbH
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
Tel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.eu.onkyo.com/
ONKYO EUROPE UK Office
Suite 1, Gregories Court, Gregories Road, Beaconsfield, Buckinghamshire, HP9 1HQ
UNITED KINGDOM Tel: +44-(0)1494-681515 Fax: +44(0)-1494-680452
ONKYO CHINA LIMITED
Unit 1&12, 9/F, Ever Gain PlazaTower 1, 88, Container Port Road, Kwai Chung,
N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039
http://www.ch.onkyo.com/
HOMEPAGE
http://www.onkyo.com/
I0802-1
SN 29344669
(C) Copyright 2008 ONKYO CORPORATION Japan. All rights reserved.
96
* 2 9 3 4 4 6 6 9 *
Speaker Hookup
Front left
speaker
Front right
speaker
Center speaker
Thank you for purchasing this product.
This quick setup sheet shows the typical hookup method for connecting
speakers and AV components (DVD player, TV, cable/satellite receiver).
For more detailed hookup information and operating instructions,
please see the Instruction Manual.
Speaker Layout (Main Room)
Ol!<J
-
•
Surround
Left
Surround
Back
Left
Front
Right
Center
Listener
Surround
Right
Surround
Back
Right
Powered
subwoofer
Surround right
speaker
Surround back
right speaker
Surround back
left speaker
Surround
left speaker
See the other side of this sheet for the AV component hookup.
(C) Copyright 2008 ONKYO CORPORATION Japan. All rights reserved.
SN 29344674
¢~~8
11111111111111111111111111111111111111111111111111
• 2 9 344 6 7 4 ·
I
AV Component Hookup
If you have an HOMI-compatible TV and players, you can connect them
to the AV receiver with HDMI cables. The audio and video signals received
via the HDMI inputs are output by the HDMI OUT as they are (pass-through).
To listen through the speakers connected to the AV receiver, please make
the audio connections shown below.
See the other side of this sheet lor the Speaker hookup.
1I11~
AUDIO
VIDEO
IBI
If your TV or player doesn't support HDMI, use the analog or digital
connections shown below.
IF NO HDMI
DIGITAL
OUT
Please ensure the monitor input
(VIDEO 1, VIDEO 2, VIDEO 3, etc.)
selected corresponds to actual
connection used.
To fUlly enjoy the AV receiver's
listening modes, turn off the
volume on your TV.
un
un
Coaxial feed from TV antenna
If you are not using Cable/satellite
box, please refer to the instruction
manual.
Assigning the HDMI Input
If you connect a video component to an HDMI input,
you must assign that HDMI Input to an input selector in Setup.
If you make the same connections as shown here, you must
assign the "DVD" setting to "IN1", and assign the
"CBUSAT" setting to "IN2".
On the front panel
'TUNING.l/-PRESET-
•
Coaxial feed from
TV antenna
If you are not using
Cable/satellite box,
please refer to the
instruction manual.
Assigning the Digital Input
If there's no sound, press the [DIGITAL INPUT]
button repeatedly until sound is heard. The digital input is
now properly assigned.
If you connect your DVD player to the AV receiver's
COAXIAL 1 DIGITAL IN, and your cable/satellite receiver
to the COAXIAL 2 DIGITAL IN, as shown, it's not necessary
to assign the digital input.
On the front panel
DIGITAL INPUT
Remote Control Codes
S8se
ess
El0~
REMOTE MODE
+
•
1. While holding down the REMOTE MODE button to which you want to enter a code, press and hold
down the [DISPLAY] button until the Remote indicator lights up (about 3 seconds).
On Integra products, button names are capitalized. For example, "Remote Mode" button and "Display" button.
2. Within 30 seconds, use the number buttons to enter the 5-digit remote control code.
The Remote indicator flashes twice.
Note:
• Remote control codes cannot be entered for the [RECEIVER] and [ZONE 2] REMOTE MODE buttons.
• Only TV remote control codes can be entered for the [TV] REMOTE MODE button.
Codes de h~lecommande
1. Maintenez enfonce Ie bouton REMOTE MODE pour lequel vous voulez entrer un code et appuyez sur
Ie bouton [DISPLAY] jusqu'a ce que I'indicateur de telecommande s'allume (environ 3 secondes).
2. Entrez les 5 chiffres du code de telecommande avec les boutons numeriques dans les 30 secondes.
Le temoin Remote clignote deux fois.
Remarque:
• Il est impossible d'entrer des codes de telecommande pour les boutons [RECEIVER] et [ZONE 2] REMOTE
MODE.
• Il est impossible d'entrer d'autres codes de telecommande que des codes de televiseur pour Ie bouton [TV]
REMOTE MODE.
C6digos de control remoto
1. Mientras mantiene pulsado el boton REMOTE MODE en el que desea introducir un codigo, mantenga
pulsado el boton [DISPLAY] hasta que se i1umine el indicador Remoto (unos 3 segundos).
2. En menos de 30 segundos, utilice los botones de numero para introducir el codigo de 5 digitos para control remoto.
El indicador Remote parpadea dos veces.
Nota:
• Los c6digos del control remoto no se pueden entrar para los botones [RECEIVER] y [ZONE 2] REMOTE MODE.
• S610 se pueden introducir c6digos de control remoto de TV para el bot6n [TV] REMOTE MODE.
Codici del telecomando
1. Tenendo premuto it pulsante REMOTE MODE al quale volete assegnare iI codice, premete et mantenete premuto iI pulsante [DISPLAY] fino a quando I'indicatore Remote si accende (dopo ±3 secondi).
2. Entro 30 secondi utilizzate i pulsanti numerici per inserire iI codice di telecomando a 5 cifre.
L'indicatore Remote lampeggia due volte.
Nota:
• Non si possono inserire codici di telecomando per i pulsanti [RECEIVER] e [ZONE 2] REMOTE MODE.
• Il pulsante [TV] REMOTE MODE permeUe solo di entrare codici di telecomando per una TV.
Fembedienungscodes
1. Halten Sie die REMOTE MODE-Taste, der Sie den Code zuordnen mochten, gedriickt, wiihrend Sie die
[DISPLAY]-Taste so lange betiitigen, bis die "Remote"-Diode leuchtet (nach ±3 Sekunden).
2. Geben Sie mit den Zifferntasten innerhalb von 30 Sekunden den 5-stelligen Herstellercode ein.
Die "Remote"-Diode blinkt zwei Mal.
Anmerkung:
• Der [RECEIVERJ- und [ZONE 2J REMOTE MODE-Taste kann kein Code zugeordnet werden.
• Der Taste [TVJ REMOTE MODE konnen nur Fembedienungscodes fur einen Femseher zugeordnet werden.
Afstandsbedieningscodes
1. Terwijl u de REMOTE MODE toets waaronder u een code wilt vastleggen ingedrukt houdt, drukt u op
de [DISPLAY] toets en houdt deze dan ingedrukt totdat de afstandsbedieningsindicator oplicht (ongeveer 3 seconden).
2. Voer binnen 30 seconden met de cijfertoetsen de 5-cijferige afstandsbedieningscode in.
De afstandsbedieningsindicator knippert tweemaal.
Opmerking:
• Er kunnen geen afstandsbedieningscodes worden ingevoerd voor de [RECEIVERJ en [ZONE 2] REMOTE
MODE toetsen.
• Aileen TV afstandsbedieningscodes kunnen worden ingevoerd voor de [TVJ REMOTE MODE toets.
Fjarrstyrningskoder
1. Tryck in den REMOTE MODE-knapp fOr vilken en kod ska matas in och tryck sedan in knappen
[DISPLAY] och hall b3da knapparna intryckta tills fjarrstyrningsindikatorn mnds (efter cirka 3
sekunder).
2. Mata inom 30 sekunder in den 5-siffriga fjarrstyrningskoden med hjalp av sifferknapparna.
Fjarrsignalindikatom blinkar tva ganger.
Notera:
• Det gar inte att mata in nagra fjarrstyrningskoder fOr knappama REMOTE MODE [RECEIVERJ och [ZONE 2J.
• Endast fjarrstymingskoder for en teve kan matas in fOr knappen [TV] REMOTE MODE.
iI~i~~
1. ~D~-ilm~ REMOTE MODE (j5~~:tt )
mffi~lo~f.ml.t
( 1cKm 3 fI.J)if)
mm , -il~ltl7\-fliti~ , ~.m~ [DISPLAY] (Mffi)
~m~¥~~~
0
2.ft30~~'~ffl.~mm7\5lli.~~~~~~o
~~tl1i~~f).'~ 2 ":!J:.
)1~
0
:
• [RECEIVER] j!;fO [ZONE 2] REMOTE MODE j!/ffftflruA.~EHtli~
• .R1f TV ~~li~::t"5J t)~~ [TV] REMOTE MODE (TV ~~f}tct: ) ft{j!*~A.
0
0
~~1~W
1.
~Dm-j1H~tf
REMOTE MODE (Jit£tlit ) !tnt , -ill~~~A -~~Il\t , iiHiitf [DISPLAY] ( ~~ )
t~~W,.a~7:J.Lt
2. 1£ 30
,~~,
( :;*;:~ 3 '~fj)
0
ffffl ~:¥=nt~A 51lL~:¥=9':JJit£1~~o
~~tl1i~~I);jt5j; 2
<Xo
)1£:
• [RECEIVER]
fifO
[ZONE 2] REMOTE MODE fI:f>~gmAil!H~f\Ji!?Jo
• .R1fTV :i~!H~li!?J7tEJI;J,Jmi1 [TV] REMOTE MODE (TV :if!H~flrt) ~fI*mAo
2
!tm:mj~IJJit£
DVD
3D LAB
A-Trend
Accurian
Acoustic Solutions
AEG
AFK
Aim
Airis
Aiwa
Akai
Akura
Alba
Alco
Allegro
Allacom
Amstrad
Amuseer
Ansonic
Apex Digital
Arena
Aristona
Arrgo
Asono
Atacom
Audiosonic
Audiovox
Audioworld
Audix
Autovox
Auvio
Basic Line
Baze
BBK
Black Diamond
Blaupunkt
Blu:sens
Blue Parade
Blue Sky
Boman
Brainwave
Brandt
Broksonic
Bush
C-Tech
California Audio
Labs
Cambridge Audio
Cambridge
Soundworks
Cat
Centrex
DVD
DVD
30503,30539
30714
30675
30713,31228
30788, 30790,
31233
31152
30672
30672,31224
30533.30641
30690. 30695,
30788. 30790,
30839, 30898,
30899,31115,
31233
30898,31233
30539,30672,
30695, 30713,
30717
30790
30869
31224
30713
31351
30759,31351
30533, 30672,
30717, 30830,
31061
31115
30539,30646
31023
31224
31224
30690
30717, 30790
30790
30713
30713
30843
30713
30898
31224
30713
30717
31233
30571
30672, 30695,
30713,30790,
30843
30898
31115
30503. 30551
30695
30672, 30690,
30713, 30717,
30723.31351
31152
30490
Centrum
CGV
Changhong
Cinea
Cinetec
CineVision
Citizen
Clairtone
Clatronic
Clayton
Coby
Codex
Conia
Contel
Creative
Crown
Crypto
CyberHome
D-Vision
Daewoo
Dansai
Dantax
Decca
Denon
Denver
Desay
Dgtec
Diamond
Dick Smith
Electronics
Digihome
DigiLogic
digiRED
Digitor
Digitrex
Dinamic
Disney
DSE
Dual
Durabrand
DVD2000
DVX
E:max
EagleTec
eBench
Eclipse
Elfunk
Elite
30751
30690
Ella
30789
30672
Ellax
30713, 30789,
31227
30751,31115
30627,31061
30841
30713
30869
30695
30571
30672. 30675.
30788. 31233
30713
31351
31233
30672
30788
30503,30539
30690, 30713,
31115
31228
30714,30816,
30874,31023,
31024,31129
31115
30490,30714.
30869,31172
31115
30539, 30713,
30723,30790
31115
30490,30634,
31634
30672, 30788.
30898
30843
30672
30751,30768,
30790
Emerson
Enterprise
Entivo
Enzer
ESA
EuroLine
Ferguson
Finlux
Firstline
Funai
GE
General Electric
Global Link
Global Solutions
Global Sphere
Go Video
GoldStar
Goodmans
GPX
Gradiente
Gran Prix
Grandin
Greenhill
Grundig
31152
Grunkel
30713
30713
30717
H&B
30690
30672
30788
30675,31270
31152
30675.30713,
30790,31023
30713,31023
30521
30768
31233
30714
31152
30723, 30751
30713
31152
30672,30690,
30788,31115.
31233
31233
Haaz
Haier
Hanseatic
Harman/Kardon
HCM
Henss
HiMAX
Hitachi
Hiteker
Hoeher
Home Tech
Industries
HotMedia
Humax
Hyundai
iLo
Ingelen
Ingersol
Initial
Inno Hit
Insignia
30591,30675.
30821,31268
30591
30503, 30539
31228
30821,31268
30675, 30788,
31115.31233,
31351
30695.30713,
30898
30591 • 30672,
32902. 30751
30713. 30843,
30869
30675. 30695,
31268
30522,30717,
30815
30717
31224
30768
31152
30573, 30717,
32902,30744,
30869.31044,
31075
30591. 32902,
30869
30690, 30713,
30723, 30790
32902
30490
30898
30713,31233
30717
30539. 30551,
30695. 30713,
30790
30790
30713, 30841,
31233
30751,31152
30843
32902,30790
30582
30788
30713
30843
30573, 30664,
30695, 30713,
31247,31664
30672
30713,31224
31224
31152
30646
31061,31228
31348
30788
31023
30717,30839
30713
31268
3
DVD
Integra
Irradio
ISP
JMB
JNC
JVC
Kansas
Technologies
Kawasaki
Kendo
Kennex
Kenwood
Kiss
KLH
Kloss
Koss
Lasonic
Lawson
Leeson
Lenco
Lenoir
Lenoxx
Lexia
LG
Limit
LiteOn
Lodos
Loewe
Logik
Lumatron
Lunatron
Luxman
Luxor
Magnasonic
Magnavox
Magnex
Manhattan
Marantz
Mark
Matsui
Maxdorf
Maxim
MBO
Mcintosh
MDS
Medion
MEl
Memorex
Metronic
4
DVD
30503,30612,
30627,31612,
31627,32901,
32900
30869,31115,
31224,31233
30695
30695
30672
30503,30539,
30558, 30623,
30867,31164
Metz
MiCO
Micromaxx
Micromedia
Micromega
Microsoft
Minato
Minax
Minoka
Mintek
Mirror
31233
Mitsubishi
30790
30672,30713
30713,30898
30490,30534
30841
30717,30790,
30815
30533
31061
30627,30789
30768
31533
30713
31228
30690
30768
30591, 32902,
30790,30869
30768
31058
30713
30511,30539,
32902
30713
30695, 30713,
32902,31115
32902
30573
30713,30717
30675
30503,30539,
30646, 30675,
30713,30821,
31268
30723
30713
30503,30539,
30675,31627
30713
30672, 30695,
30713
30788
30713
30690
31533
30713
30630,31270
30790
30695,31270
30690
MPX
Mx Onda
NAD
NEC
Nesa
Noriko
Nowa
Nu-Tec
Okano
Olidata
Omni
Onkyo
Oppo
Optim
Optimus
Orion
Ormond
Pacific
Palladium
Palsonic
Panasonic
Panda
peeKTon
Philco
Philips
PianoDisc
Pioneer
Polaroid
Polk Audio
Presidian
Prima
Proceed
DVD
30525, 30571,
30713
30723,30751
30695
30503,30539
30539
30522,32083
30752
30713
31115
30717,30839
30752
30521, 30713,
31403,31521
30843
30751
32902
32902, 30785,
30869
30717
30752
30843
31228
30752
30672
30690
30503,30612,
30627,31612,
31627,32901,
32900
31224
30843
30525,30571
30695,31233
30713
30695, 30713,
30759, 30768,
30790
30695,30713
30672
30490,30503,
30571, 30703,
31010,31011,
31362,31462,
31490,32903,
31762
30717,30789
30898,31224
30675, 30690,
30788,30790
30503,30539,
30585,30646,
30675,30854,
31260,31267,
31340,31354,
32056,32904
31024
32906,30490,
30525, 30571,
30631
31061
30539
30675
31228
30672
Proline
Proscan
Proson
Prosonic
Pye
Radionette
RadioShack
RCA
Realistic
REC
Redstar
Reoc
Revoy
Richmond
Rio
Roadstar
Rocksonic
Rotel
Rowa
Rownsonic
Royal
Saba
Saivod
Salora
Sampo
Samsung
Sansui
Santosh
Sanyo
Schaub Lorenz
Schneider
Schoentech
Schwaiger
Scientific Labs
Scott
Seeltech
SEG
Semp
Shanghai
Sharp
Sherwood
Shinco
Shinsonic
Sigmatek
Siltex
Silva
Silva Schneider
SilverCrest
30672
30522
30713
30752
30539,30646
32902,30869
30571
30522, 30571,
30717,30790,
30822,31022,
31132,32901
30571
30490
30759, 30788,
30898
30752,30768
30841
31233
30869
30672, 30690,
30713, 30898,
31227
30789
30558,30623
30717,30759
30789
30690
30551
30759
32902
30752
32905, 30490,
30573,30744,
30820,30899,
31044,31075
30695,30751,
30768,31228
31115
30675, 30695,
30713,31228
30788,31115
30539,30646,
30713, 30788,
30790,30869
30713
30752
30768
30672,31233
31224
30713
30503
30672
30630, 30675,
30713, 30752,
31256
30717,32902
30717
30533,30839
31224
31224
30788,30898
30898
31152
DVD
Singer
Sistemas
Skantic
Skymaster
Skyworth
Sliding
SM Electronic
Smart
Sonic Blue
Sony
Sound Color
Soundmaster
Soundmax
Standard
Star Clusters
Starmedia
Strong
Sunwood
Superscan
Supervision
SVA
Sylvania
Symphonic
Synn
Tandberg
Targa
Tchibo
TCM
Teac
Tee
Technics
Technika
Technisson
Technosonic
Techwood
Tecnimagen
Tedelex
Telefunken
Teletech
Tensai
Tevion
Theta Digital
Thomson
Tokai
Tom-Tee
Top Suxess
DVD Recorder
DVD
30690, 30751,
30768
30672
30539,30713
30768
30898
31115
30690, 30768,
31152
30713
30573, 30869
30533, 30573,
30630, 30864,
31033, 31069,
31070,31431,
32907,31533
31233
30768
30768
30768, 30788,
30898
31152,31227
31224
30713
30788, 30898
30821
30768,31152
30672,30717,
30752
30630, 30675,
30821,31268
30675, 30821,
31268
30768
30713
31227
32902
32902, 30790
30571, 30675,
30717,32902,
30759, 30768,
30790,31227
30898
30490, 30703
31115
31115
31115
30713
31233
30690, 30768,
31228
30789,30790
30713,30768
30690
30768, 30898,
31227
30571
30511, 30522,
30551
30788, 30790,
30898
30789
31224
Toshiba
Tredex
TSM
Umax
United
Universum
Urban Concepts
US Logic
Venturer
Vestel
Viewmaster
Voxson
Vtrek
Waitec
Walkvision
Wellington
Weltstar
Wharfedale
Wilson
Windsor
Windy Sam
WIZE
Woxter
Xbox
Xenius
XLogic
XMS
Yamaha
Zenith
30503,30539,
30573, 30695,
31045, 31154,
32901
30843
31224
30690
30675, 30695,
30713, 30788,
31115,31152,
31228,31351
30591, 30713,
32902, 30790,
30869,31227
30503,30539
30839
30790
30713
31224
30690
31228
31224,31233
30717
30713
30713
30713, 30751,
30752, 30790
31233
30713
30573
31115
31224
30522,32083
30790
30768, 31152,
31228
30788
30490, 30539,
30545,30646,
31354
30503,30591,
32902,30869
Accurian
Aristona
Centrum
CyberHome
Denon
Emerson
Funai
Go Video
GPX
Hitachi
Humax
iLo
JVC
LG
Loewe
Magnavox
MiCO
Mitsubishi
Panasonic
Philips
Pioneer
Pye
RCA
Roadstar
Samsung
Schneider
Sharp
Sony
Star Clusters
Sylvania
Targa
Teac
Tevion
Thomson
Universum
Yamaha
Zenith
30675
30646
31227
31129
30490
30675
30675
32902
32902
31664
30646
31348
31164
32902
32902
30646, 30675
30751
31403
30490,31010,
31011
30646, 31340
30631
30646
30522
31227
30490
30646
30630,30675
31033,31069,
31070,31431
31227
30675
31227
31227
31227
30551
31227
30646
32902
TV/DVD Combination
DVD High Definition (Blu-Ray)
LG
Panasonic
Philips
Pioneer
Samsung
Sony
32902
32903
32904
32906
32905
32907
DVD High Definition (HD-DVD)
LG
Onkyo
RCA
Toshiba
Integra
32902
32900, 32901
32901
32901
32900, 32901
Akai
Alba
Apex Digital
Black Diamond
Blue Sky
Broksonic
Bush
Centrum
Citizen
Crown
Elfunk
Emerson
ESA
Ferguson
Funai
Goodmans
Grandin
Grundig
Hitachi
Insignia
Logik
30695
30695
30830
30713
30713
30695
30713
30713
30695
30713
30713
30675, 31268
31268
30695, 30713
31268
30713
30713
30539, 30695
30713,31247
31268
30713
5
TV/DVD Combination
Television
Luxor
Magnavox
Matsui
Orion
Pacific
Panasonic
Anhua
Anitech
Ansonic
Philips
RCA
Samsung
Sansui
SEG
Sliding
Sylvania
Thomson
Toshiba
United
Universum
30713
31268
30713
30695
30695
31490
30539, 30854,
31260
31022
30899
30695
30713
31115
30630,30675,
31268
30551
30695
30713
30713
TVNCR Combination
Thomson
1~3"::""05~5~1---Television
A-Mark
A.R. Systems
Accent
Accuscan
Action
Addison
Admiral
Advent
Adventuri
Agna
Aiko
Aim
Akai
Akiba
Akito
Akura
Alba
Alfide
All-Tel
Allstar
Ambassador
America Action
American High
Amstrad
Amtron
Anam
Anam National
6
10047,10054,
10160
10037
10037
10047
10650
10092
10017, 10047,
10051,10054,
10093,10180,
10463
10761,10783,
10842
10000
10150
10037, 10092
10037, 10706
10000,10037,
10056, 10060,
10145,10178,
10672, 10702,
11675
10037
10037
10037,10171,
11687
10037
10672
10865
10037
10150
10180
10000, 10060
10000,10037,
10171
10000, 10180
10037,10180,
10250
10037,10250,
10650
AOC
Apex Digital
Ardem
Aristona
Asberg
Astra
Atlantic
Audinac
Audiosonic
Audiovox
Aumark
Aventura
AVP
Awa
Baile
Baird
Basic Line
Baur
Baysonic
Beaumark
Beijing
Beko
Bell & Howell
BenQ
Beon
Bestar
Blue Sky
BPL
Bradford
Brinkmann
Brionvega
Brockwood
Broksonic
Bush
Candle
Capehart
Carena
Carrefour
Carver
Cascade
Casio
Cathay
CCE
Celebrity
Celera
Centurion
Changcheng
Changhong
Ching Tai
Television
10051
10037
10037
10060, 10092,
10093, 10178,
10180,10451,
11365
10156,10765,
10890
10037
10037
10037
10037
10037
10180
10037, 10865
10092, 10180,
10451,10623,
10802, 10875,
11284
10060
10171
10000
10451
10661
10037
10037
10037
10180,10236,
10463
10017,10178
10226, 10661
10037
10017,10054,
10093,10154
11756
10037
10037
10037,11254
10037
10180
10037
10037
10056, 10178
10180,10236,
10463
10037, 10661
10056
10017, 10092,
10178
10037
10037
10054
10037
10037
10037
10037
10000
10765
10037
10051, 10661
10156, 10765,
10783,11156
10092
ChunYun
Chung Hsin
Cinema
Cineral
Citek
Citizen
Clarion
Clarivox
Classic
Clatronic
Colortyme
Commercial
Solutions
Concerto
Condor
Conia
Conic
Conrowa
Contec
Cosmel
Craig
Crosley
Crown
Crown Mustang
CTX
Curtis Mathes
CXC
D-Vision
Daenyx
Daewoo
Dansai
Dawa
Daytek
Dayton
Daytron
Dayu
Decca
Dell
Denon
10000, 10092,
10180
10053, 10180
10672
10092, 10451
10047
10000, 10054,
10056,10060,
10092,10171,
10180,10451,
10463
10180
10037
10056, 10092
10037
10017,10047,
10054, 10060,
10178
10047,11447
10056
10037
11687
10178
10145,10156,
11156
10037, 10180
10037
10171,10180
10000, 10054,
10171,10180
10037, 10053,
10056, 10093,
10180, 10672
10672
11756
10000, 10037,
10047, 10051,
10054,10056,
10060, 10093,
10145, 10154,
10166,10178,
10180, 10451,
10702,11147,
11347
10180
10037
10180, 10672
10037, 10056,
10092,10154,
10178,10180,
10451, 10623,
10661, 10672,
10865,11661,
11755,11756
10037
10037
10672
10092
10037,10056,
10092,10178,
10180
10661
10037
11178
10145
Television
Television
Television
Denver
10037
Fujitsu
10683, 10853
Desmet
10037
Fujitsu General
10683
Diamant
10037
Diamond
Digatron
10672, 10706
10037
Funai
10000,10171,
10180,11271,
11394
Digiline
10037
Furi
10145
Digitor
10037
Futuretech
10180
10037
11704
Galaxi
10037
Galaxis
Drean
Dual
10037
10037
Gateway
10037
11755, 11756
Dumont
10017,10178,
10180
Dixi
Dream Vision
Durabrand
Dux
Dwin
10171,10178,
10180,10463,
11463
10037
GE
10000, 10047,
10051,10060,
10092, 10093,
10178,10180,
10451,11147,
11347,11447,
11454
Hitachi
10000, 10017,
10037, 10047,
10051,10054,
10056, 10092,
10145,10150,
10156,10178,
11145, 11156,
11256, 11484,
11576, 11643,
11691
Hitachi Fujian
Hoeher
10150
Hongmei
Hornyphon
10093
10037
HP
11642
Huafa
Huari
10145
10890
10865
10145
10093
GEC
Gemini
10047
Hugoson
Huodateji
Dynatron
10037
General Electric
10047
Hypson
10037
Dynex
11463,11810
Genesis
10037
Hyundai
10037
10051
Eaton
10060
Genexxa
10037
Iberia
10865
10037
ECE
10037
Gericom
10865
ICE
10037
Elbe
Electroband
10037
Gibralter
10000, 10017
liyama
10890
10000
11755
Go Video
10060
Ima
GoldStar
Imperial
10037
Imperial Crown
10661
10037
Infinity
10054
Element
11687
10037
Innova
Innowert
10037
ELG
Elin
Elite
10037
Granada
10000,10037,
10661
10037, 10053,
10056
10037, 10226
Indiana
Elektra
10000, 10056,
10150,10154,
10178,10463
10017,11661
10037,10047,
10054,10056,
10154,10178
10178,10180,
10236
10037
10178
Grandin
10037, 10865
Insignia
Grundig
10037,10672,
10683, 10706
Inteq
Electrograph
Electrohome
Emerald
Emerson
Envision
Erres
ESA
ESC
Euroman
Europa
10017, 10037,
10047,10150,
10154, 10171,
10178,10180,
10236,10451,
10463, 10623,
11394
10813,11365
10037
10171
10037
10037
Europhon
10037
10037
Evesham
11719
Evolution
11756
Exquisit
Ferguson
10037
10037, 10053
Fidelity
Finlux
Goodmans
Gradiente
Grundy
Grunpy
Haaz
Haier
Hallmark
Hankook
10180
10180
10037
Irradio
10037
10178,10180,
10236
10056, 10178,
10180
IRT
Isukai
10451,11661
10037
ITS
ITT Nokia
10037
10180
lTV
10037
JBL
JCB
10054
Hanseatic
10037, 10661
Hantarex
Hantor
10037,10865
10037
Harley Davidson
10000, 10060,
10178, 10180
Harman/Kardon
Harsper
10054
10865
10180
10037,10171
10037
10236
Havermy
HCM
10093
10037
10037
Heathkit
10017
Fisher
10000, 10047,
10054,10154
10865
Flint
Formenti
10037
10037
Helios
Hello Kitty
10093
10037
10037
Fujimaro
10865,11687
10037
10037,11748
10037
10037
Fortress
10037
Intervision
Harvard
Fraba
Friac
Internal
10017,10145
10037
10706
Harwood
Hauppauge
Firstar
Firstline
Interbuy
Interfunk
10865
10171,11517,
11564,11710
Hewlett Packard
Highline
10451
11642
10037
Himitsu
10180
Hinari
10037
Hisense
10145,10156,
11156
Jean
Jensen
10000
10051,10092,
10156, 10236
Jiahua
10761
10051
Jinfeng
10051,10226
Jinxing
JVC
Kaisui
Kamp
Kangli
10037, 10054,
10145,10156
10053, 10054,
10093,10160,
10463, 10650,
10683,10731,
11253, 11428
10037
10017,10180
10661
KDS
KEC
11687
10060, 10180
Ken Brown
10236, 10463
7
Television
Television
Kendo
Kenwood
Khind
Kioto
Kiton
KLH
KLL
Kneissel
Kolin
Koister
Konig
Konka
Korpel
Kosmos
KTY
Kunlun
L&S Electronic
Lark
Leeson
Lenco
Leyco
LG
Liesenk & Tter
Liesenkotter
Lifetec
Lloyd's
Loewe
Logik
Lumatron
Lux May
Luxman
LXI
M&S
M Electronic
Madison
MAG
Magnadyne
Magnasonic
Magnavox
8
10037
10180
10706
10054, 10706
10037
10156,10180,
10765
10037
10037
10053, 10150,
10180
10037
10037
10037,10180
10037
10037
10180, 10463
10051, 10226,
10661
10865
10154
10037
10037
10037
10037,10054,
10056,10060,
10178, 10856,
11178,11265,
11663,11758,
11768
10037
10037
10037,10683
10056, 10180,
10236
10037
10056, 10060,
10180, 10236
10037
10037
10056
10000, 10017,
10037,10047,
10051,10053,
10054, 10056,
10060, 10093,
10154,10156,
10166,10171,
10178
10054, 10236
10037, 10661
10037
11687
10054
10000, 10054,
10056, 10092,
10093, 10156
10000,10037,
10047,10051,
10054,10060,
10092,10154,
10171,10180,
10250,10706,
10802, 11254,
11365,11454,
11755
Magnum
Majestic
Manesth
Manhattan
Marantz
Mark
Mastro
Masuda
Matsui
Matsushita
Maxent
Mediator
Medion
Megatron
Memorex
Mercury
Mermaid
Metz
MGA
MGN Technology
Micro Genius
Micromaxx
Midland
Minato
Minoka
Mitsubishi
Morgan's
Motorola
MTC
Mudan
Multitec
Multitech
Mx Onda
NAD
Naiko
Nakimura
NAT
National
NEC
Neckermann
NEI
Television
10037
10017
10037
10037
10037,10054,
10704, 11398,
11454
10037
10053, 10706
10037
10037, 10056
10051, 10250,
10650
11211,11755,
11756,11757
10037
10037
10047,10056,
10145,10178
10037,10056,
10060, 10150,
10154,10178,
10180, 10250,
10463
10037, 10060
10037
10037
10150,10178
10178
10150
10037
10017,10047,
10051,10056
10037
10037
10037,10056,
10093,10150,
10154,10160,
10178,10180,
10236, 10250,
10836,11250
10037
10051, 10054,
10093, 10150
10056, 10060,
10092, 10180
10051,10226
10037
10037, 10180
11687
10037,10056,
10156,10166,
10178,10866,
11156
10037
10037
10226
10051,10226
10047,10051,
10053, 10056,
10154,10156,
10178,10661,
10704, 11398,
11704
10037
10037
Neovia
Netsat
NetTY
Neufunk
New Tech
Newave
Nikkai
Nikko
Nikkodo
Noblex
Nokia
Norcent
Nordmende
Normerel
Novatronic
NTC
Nyon
Okano
Olevia
Onida
Onkyo
Onwa
Opera
Optimus
Optonica
Orbit
Orion
Orline
Osaki
Osio
Osume
Otic
Otto Versand
Pace
Pacific
Packard Bell
Palladium
Palsonic
Panama
Panasonic
Panavision
Panda
Paxonic
PCE
Penney
10865
10037
11755
10037
10037, 10056
10092, 10093,
10178
10037
10092, 10178
10092, 10178
10037,10154
10180
11365
10037
10037
10037
10092
10000
10037
11610
10053,11253
11807
10180
10037
10056, 10093,
10150,10154,
10166,10178,
10180,10250,
10650
10093
10037
10017,10037,
10178,10180,
10236, 10463,
11463
10037
10037
10037
10037
11687
10037,10093,
10226
10092
10037
10092
10037
10037
10037
10000, 10037,
10051,10054,
10156,10226,
10236, 10250,
10650, 10853,
11271,11480,
11636, 11650
10037
10051,10226,
10706
10060
10060, 10156
10000, 10037,
10047,10051,
10056,10060,
10156,10178,
10250,11347
Television
Perdio
Perfekt
Petters
Philco
Philips
Phoenix
Phonola
Pilot
Pioneer
Plantron
Playsonic
Polaroid
Portland
Powerpoint
Precision
Prima
Prism
Profitronic
Proline
Proscan
Prosco
Prosonic
Protec
Protech
Proton
Proview
ProVision
Pulsar
Pulser
Pye
Qingdao
Quadral
Quartz
Quasar
Quelle
R-Line
Rabbit
Radiola
Radiomarelli
RadioShack
Radiotone
Television
10037
10037
11523
10037,10054,
10056, 10092,
10145,10178,
10180,10451,
10463, 11661
10000,10017,
10037,10051,
10054, 10056,
10092,10171,
10178, 10605,
10690, 11254,
11454,11506,
11756
10037
10037
10051,10056,
10060, 10178,
10706
10037, 10166,
10679, 10866,
11260,11398,
11457
10037
10037
10765, 10865,
11327,11328,
11523,11687,
11766
10092, 10451
10037
10180,10236
10761,10783
10051,10250
10037
10037
10047,11347,
11447
10156
10037
10037
10037
10056, 10178
11687
10037
10017, 10092
10092, 10178
10037
10051,10226
10051
10150,10178
10051, 10250,
10650, 10865
10037
10037
10047
10037
10037
10037,10047,
10056, 10150,
10154, 10178,
10180
10037
RCA
Realistic
Recco
Recor
Rectiligne
Redstar
Reflex
Relisys
Remotec
Revox
RFT
Roadstar
Rowa
Runco
Saba
Saivod
Sampo
Samsung
Sanky
Sansei
Sansui
Sanyo
Sanyong
Sanyuan
Saville
SBR
Sceptre
Schneider
Scotch
Scott
Television
10000, 10047,
10051,10054,
10060, 10090,
10092,10093,
10178,10679,
11047,11147,
11247, 11347,
11447, 11454,
11547, 11781
10047, 10056,
10150,10154,
10178,10180
10706
10037
10037
10037
10037
10865,11211
10037,10093,
10145,10171,
10250
10037
10037
10037
10037
10017,10060,
11398
10250
10037
10047, 10092,
10093,10154,
10171,10178,
10650, 11755,
11756
10017,10037,
10047,10054,
10056, 10060,
10090, 10092,
10093,10154,
10156,10178,
10226,10702,
10766, 10814,
11060,11235
10060
10092, 10451
10037,10060,
10463,10706
10000,10037,
10047,10054,
10145,10154,
10156,10171,
10180,10463,
10704,11755
10037
10093
10060
10037
11360
10037
10178
10178,10180,
10236
Sears
SEG
SEI
Sei-Sinudyne
Semivox
Semp
Serie Dorada
Serino
Shanghai
Shaofeng
Sharp
ShenYing
Shencai
Sheng Chia
Shintoshi
Shivaki
Siam
Siemens
Siera
Signature
Silva
Silva Schneider
Simpson
Singer
Sinudyne
SKY
Sky-North
Skygiant
Skyworth
Sliding
Soemtron
Solar Drape
Solavox
Sole
Soniko
Sonneciair
Sonoko
Sontec
Sony
Soundesign
Soundwave
Sowa
Spectravision
Spectroniq
Squareview
10000,10017,
10037,10047,
10051, 10053,
10054,10056,
10060, 10093,
10154,10156,
10166,10171,
10178
10037
10037
10037
10180,10236,
10463
10156,11356
10056,10156,
10178, 10180
10093
10226
10145
10053,10054,
10093,10180,
10650, 10818,
11 093, 11393,
11602
10092
10145
10093, 10236
10037
10037,10178
10037
10037, 10145
10037
10047, 10093
10037
10037
10178
10037, 10060,
10092
10037
10037
10037
10180
10037
10865
10865
10000
10037
10813
10037
10037
10037
10037
10000,10017,
10037, 10053,
10150,10154,
10650,11685
10056,10178,
10180
10037
10051,10060,
10092,10156,
10178, 10226
10156, 10178
11687
10171
9
Television
SR2000
SSS
Standard
Starlite
Strato
Sunkai
Sunstar
Sunwood
Superscan
SuperTech
Supra
Supreme
SV2000
SVA
Sylvania
Symphonic
Synco
Syntax
Sysline
Tacico
Talent
Tandy
Tashiko
Tatung
TCl
Teac
Tec
Tech Line
Technics
Techwood
Teco
Teknika
Telecolor
Telecor
Telefunken
Telefusion
Telegazi
Telemeister
Telesonic
Telestar
Teletech
Teleview
10
10154,10171
10180
10037
10037, 10180,
10236
10037
10865
10037
10037
10093, 10864
10037
10056, 10178
10000
10054
10865
10000, 10037,
10047,10051,
10054, 10056,
10092, 10154,
10171,10178,
11271, 11394
10000,10171,
10178,10180
10000, 10060,
10092, 10093,
10178, 10451
11610
10037
10092, 10178
10178
10093
10092, 10650
10000, 10037,
10051,10054,
10060, 10154,
10156,11156,
11254,11719,
11756
10706
10037,10154,
10171,10178,
10706,11755
10037
10037
10051,10054,
10226, 10250,
10650
10051, 10056,
10060,10250
10051,10092,
10093,10178
10054, 10056,
10060, 10092,
10150,10178,
10180, 10463
10017
10037
10037,10056,
10702
10037
10037
10037
10037
10037
10037
10037
Television
Television
10037
10037
10092
10037,11687
10047,10056,
Thomas
10178
10037,10047,
Thomson
11447
Thorn
10037
10093
Tiane
10056, 10178,
TMK
10180,10236
TMl
11756
TNCi
10017
Tocom
10156
Tokai
10037
10180, 10672
Tophouse
10060, 10093,
10145,10150,
10154,10156,
10166, 10650,
Toshiba
10845,11145,
11156, 11256,
11265,11356,
11656,11704
Totevision
10051
Toyomenka
10178
TRANS-continents 10037, 10865
Transonic
10037
Trio
11687
10037
Triumph
Truetone
10051, 10250
Tuntex
10092
TVS
10463
Uher
10037
Ultra
10092
10037
Ultravox
10037
Unic Line
United
10037
Universal
10037, 10047
Universum
10037
Univox
10037
10864, 10885,
V
11755, 11756
10865
V2max
V7 Videoseven
11755
Vestel
10037
Vexa
10037
10053,10160,
Victor
10250,10650,
11428
Videocon
10037
10037
VideoSystem
Vidikron
10054,11398
Vidtech
10178
10857, 10864,
Viewsonic
10885,11755
Viking
10060
Vision
10037
10864, 10885,
Vizio
11755, 11756,
11758
Vortec
10037
Voxson
10037, 10178
Waltham
Tennessee
Tensai
Tera
Tevion
Wards
Warumaia
Watson
Waycon
Wega
Welton
Westinghouse
Wharfedale
White
Westinghouse
World
World-of-Vision
Wyse
Xenius
XR-1000
Xrypton
Yamaha
Yamishi
Yapshe
Yokan
Yoko
Zenith
10037
10000,10017,
10037, 10047,
10051,10054,
10056, 10060,
10093,10154,
10156,10166,
10178,10180,
10236, 10866,
11147,11156,
11347
10661
10037
10156
10037
10178
10000, 10451,
10885,10890,
11577,11712
10037
10037, 10236,
10451,10463,
10623
10180, 10236,
10451,10463
10865,10890
11365
10661
10154,10171,
10180
10037
10650,11576
10037
10250
10037
10037
10000,10017,
10037, 10047,
10092, 10093,
10145,10160,
10171,10178,
10463,11145,
11265
TV/DVD Combination
Akai
Dynex
Emerson
Philips
Polaroid
Sylvania
11675
11810
11394
11454
11523, 11766
10171, 11394
TVNCR Combination
America Action
Amstrad
Audiovox
Broksonic
Curtis Mathes
Emerson
Fidelity
GE
GoldStar
Grundig
lG
10180
10171
10180
10463
10051
10236, 10463
10171
10047, 10051,
10093
10037, 10056
10037
10178
TVNCR Combination
Magnavox
10054
Memorex
10056, 10250
Mitsubishi
10093
Orion
10463
Panasonic
10051,10250
Penney
10051, 10056
Philips
10037
Quasar
10051,10250
10047, 10051,
RCA
10093
Sansui
10463
Schneider
10037
Sears
10056
Sharp
10093
Siemens
10037
Sony
10000
Sylvania
10054
Teac
10171,10178
VCR
Brinkmann
Broksonic
Bush
Calix
Candle
Canon
Carena
Carrefour
Carver
Casio
CGE
Changhong
Citizen
Classic
Clatronic
Colortyme
VCR
A-Mark
ABS
Accurian
Admiral
Adventura
Aim
Aiwa
Akai
Alba
Alienware
Allegro
Allstar
American High
Amstrad
Anam
Anam National
Ansonic
Aristona
ASA
Astra
Asuka
Audiolab
Audiovox
Avis
AVP
Awa
Baird
Bell & Howell
Black Diamond
Blaupunkt
Blue Sky
Brandt
20000,20037
21972
20000
20039, 20060,
20121
20000,20037
20348,20642
20000,20032,
20037,20348,
21291
20037,20348,
20642
20000, 20081,
20348
21972
20039
20081
20035,20081
20000
20037,20162,
20226
20162, 20226,
21162,21562
20000
20081
20037, 20081
20035
20000, 20037,
20038, 20081
20081
20037, 20038
20000
20000
20037, 20043,
20642
20000
20000,20035,
20039
20642
20081,20162,
20226
20037,20348,
20642
20320
Colt
Craig
Criterion
Crosley
Crown
Curtis Mathes
CyberPower
Cyrus
Daewoo
Daytron
De Graaf
Decca
Degraff
Dell
Denon
Diamant
Diamond
Dick Smith
Electronics
Digitor
DirecTV
DSE
Dual
Dumont
Durabrand
Dynatech
Elbe
Electrohome
Electrophonic
Emerald
Emerex
Emerson
VCR
20348
20121,20184,
20348,21479
20000, 20081,
20348,20642
20037
20037,20038
20035
20081
20045
20035, 20081
20000
20000
20081
20000, 20035,
20037,21278
20037
20000
20035, 20045,
20060
20000
20037
20000
20000,20035,
20081
20037
20000, 20035,
20060,20162,
21035
21972
20081
20037,20045,
20642,21278
20037
20042,20081
20000, 20067,
20081
20042,20081
21972
20042, 20081
20037
20348
20642
20642
20739
20642
20000,20081,
20348
20000,20081
20038,20039,
20642
20000
20038
20000,20037,
20043,20060
20037
20121,20184
20032
20000, 20035,
20037,20039,
20043, 20045,
20121,20184,
20348,21278,
21479
Ferguson
Fidelity
Finlandia
Finlux
Firstline
Fisher
Flint
Fuji
Fujitsu
Fujitsu General
Funai
Galaxi
Garrard
Gateway
GE
GEC
Gemini
General
General Technic
Genexxa
Go Video
GoldStar
Goodmans
GPX
Gradiente
Granada
Grandin
Grundig
Haaz
Hanseatic
Harley Davidson
Harman/Kardon
Hewlett Packard
HI-Q
Hischito
Hitachi
Hoeher
Hornyphon
Howard
Computers
HP
Hughes Network
Systems
Humax
20000,20320,
20348
20000
20000,20037,
20042, 20043,
20081,20226
20000,20042,
20081
20037,20042,
20043, 20045,
20348
20000,20039
20348
20033, 20035
20000,20037,
20045
20037
20000,20037
20000
20000
21972
20000,20035,
20060,20226,
20320,20807,
21035,21060
20081
20060
20045
20348
20000,20037
20614
20000, 20035,
20037,20038,
20039, 20225,
20226,21237
20000,20037,
20081, 20348,
20642
20037
20000
20000, 20035,
20037,20042,
20081,20226
20000,20037
20081, 20226,
20320,20348
20348
20037, 20038,
20081
20000
20038,20081
21972
20000,20035
20045
20000,20035,
20037,20042,
20045,20081,
20089
20642
20081
21972
21972
20042,20739
20739
11
VCR
VCR
Hush
Hypson
Hytek
iBUYPOWER
Imperial
Interbuy
Interfunk
International
Intervision
Irradio
lTV
Jensen
JMB
Joyce
JVC
Kambrook
Karcher
KEC
Kendo
Kenwood
KIC
Kioto
Kneissel
Kodak
Kolin
KTV
LG
Lifetec
Linksys
Lloyd's
Loewe
Logik
Luxor
LXI
M Electronic
Magnadyne
Magnasonic
Magnavox
Magnum
Manesth
Marantz
Mark
Marta
Mastec
Matsui
Matsushita
12
21972
20000,20037
20000
21972
20000
20037
20081
20037,20642
20000,20037,
20348
20037,20081
20037
20067
20348
20000
20045,20067,
20081,20184,
21162,21279
20037
20081,20642
20037
20037, 20348,
20642
20038,20067
20000
20348
20037,20348
20035,20037
20043
20000
20000, 20037,
20038, 20042,
20045, 20225,
21237
20348
21972
20000,20038
20037,20081,
20162, 21062,
21562
20000
20043
20000, 20037,
20042,20067
20000,20037,
20038
20081
20000, 20037,
21278
20000, 20035,
20037,20039,
20081, 20226,
20618,20642,
21781
20642
20045, 20081
20035,20038,
20081
20000
20037
20642
20037,20348
20035,20081,
20162,20226,
21162
21972
20081
20348,20642
20035
20000,20035,
20037,20039,
Memorex
20162, 20348,
21162,21237
Metronic
20081
20037, 20081 ,
20162, 20226,
Metz
21062,21162,
21562
MGA
20043,20060
Micormay
20348
Microsoft
21972
Migros
20000
Mind
21972
Minolta
20042
20000, 20042,
20043, 20060,
20067,20081,
Mitsubishi
20642,20807,
21343
Motorola
20035
MTC
20000
MTX
20000
Multitec
20037
Multitech
20000, 20039
Murphy
20000
Myryad
20081
20348,20642
Naiko
NAP
20039
National
20226
Nebula Electronics 20033
20035,20037,
NEC
20038, 20067,
21287
Neckermann
20081
Nesco
20000
Newave
20037
Nikko
20037
20037
Nikkodo
Niveus Media
21972
20042,20081
Nokia
20067,20320
Nordmende
Northgate
21972
20000, 20081
Oceanic
Okano
20348
20035, 20162,
Olympus
20226
Onimax
20642
Onkyo
20222
20000,20035,
Optimus
20037,20162,
21062,21162
20000,20121,
Orion
20184, 20348,
21479
Orson
20000
Osaki
20000,20037
Otto Versand
20081
20000, 20348,
Pacific
20642
Packard Bell
21972
Media Center PC
Mediator
Medion
MEl
VCR
Palladium
Palsonic
Panama
Panasonic
Pathe Cinema
Penney
Pentax
Perdio
Philco
Philips
Phonola
Pilot
Pioneer
Polk Audio
Prinz
Profitronic
Proline
Proscan
Protec
Protech
Pulsar
Pye
Qisheng
Quartz
Quasar
Quelle
Radialva
Radiola
Radionette
RadioShack
Radix
Randex
RCA
Realistic
Reoc
ReplayTV
Ricavision
20037,20348
20000,20642
20035
20000, 20035,
20162, 20225,
20226, 20614,
20616,21035,
21062,21162,
21244,21293,
21562
20043
20000,20035,
20037, 20038,
20042,20067,
20081,20162,
21035,21237
20042
20000
20000,20035,
20038,20081,
20226
20000, 20035,
20045,20081,
20162,20226,
20616,20618,
20739
20081
20037
20042, 20067,
20081,20162
20081
20000
20081
20000,20320,
20642
20060,21060
20000
20081
20039
20000,20081
20060
20035
20035,20162,
20226,21035,
21162
20081
20037,20081
20081
20037
20000, 20035,
20037,20162,
21162
20037
20037
20000, 20035,
20042, 20045,
20060, 20226,
20320,20807,
20880,21035,
21060
20000, 20035,
20037,20121,
20162,21162
20348
20614,20616
21972
VCR
Roadstar
Runco
Saba
Saisho
Salora
Sampo
Samsung
Sanky
Sansui
Sanyo
SBR
Schaub Lorenz
Schneider
Scott
Sears
SEG
SEI
Sei-Sinudyne
Seleco
Semivox
Semp
Sharp
Shinco
Shintom
Shivaki
Siemens
Siera
Signature
Silva
SilverCrest
Singer
Sinudyne
Smaragd
Sonic Blue
Sontec
Sonwa
Sony
Soundmaster
Soundwave
Stack 9
STS
Sunkai
Sunstar
VCR
20037, 20038,
20081
20039
20320
20348
20043
20037
20000,20038,
20045,20060,
20739,21014
20039
20000,20067,
20348,21479
20000,20067,
20348,21330
20081
20000,20348
20000,20037,
20042,20081,
20348,20642
20043,20045,
20121,20184
20000,20033,
20035,20037,
20039,20042,
20043,20045,
20060, 20067,
20162,21237
20081,20642
20081
20081
20037
20045
20045
20000, 20032,
20037,20807
20000
20000,20039
20037
20037,20081,
20320
20081
20000, 20035,
20037,20060
20037
20642
20037, 20045,
20348
20081
20348
20614,20616
20037
20642
20000,20032,
20033,20035,
20067, 20226,
20636,21232,
21296,21447,
21448,21972
20000
20037,20348
21972
20042
20348
20000
Suntronic
Supra
Susumu
SV2000
SVA
Sylvania
Symphonic
Systemax
T+A
Tagar Systems
Tandy
Tashiko
Tatung
Tchibo
TCM
Teac
Technics
TechniSat
Teco
Tedelex
Teknika
Telefunken
Telerent
Telestar
Teletech
Tensai
Tevion
Thomas
Thomson
Thorn
Tivo
TMK
TNIX
Tokai
Topline
Toshiba
Totevision
Touch
Tradex
Trix
Ultra
United
Universum
Vector
VCR
20000
20037, 20348
20037
20000
20000
20000,20035,
20043, 20081,
21781
20000
21972
20162
21972
20000
20000,20037,
20081
20000,20043,
20045,20067,
20081,20348
20348
20348
20000,20037,
20067,20642
20000,20035,
20037,20081,
20162, 20226,
21162
20348
20035,20037,
20038
20037, 20348,
20642
20000, 20035,
20037
20320,20642
20226
20037
20000
20000,20037
20348,20642
20000
20060,20067,
20320
20037,20320
20618,20636,
20739,21996
20000
20037
20037
20348
20000,20042,
20043,20045,
20067,20081,
20828, 20845,
21008,21145,
21290, 21972,
21996
20037
21972
20081
20037
20045
20348
20000,20037,
20081,20348
20045
Vector Research
Victor
Video Concepts
Video Technic
Videomagic
Videosonic
Viewsonic
Villain
Voodoo
Wards
Watson
Weltblick
Wharfedale
White
Westinghouse
World
XR-1000
Yamaha
Yoko
Zenith
ZT Group
ZX
20038, 20184
20067
20045
20000
20037
20000
21972
20000
21972
20000,20033,
20035,20037,
20038,20039,
20042,20043,
20045,20060,
20081
20081,20642
20037
20642
20000
20348
20000,20035
20038
20037
20000, 20033,
20037,20039,
21479
21972
20348
DBS/PVR Combination
DirecTV
20739
Hughes Network
Systems
Philips
Samsung
20739
20739
20739
DVD Recorder
Emerson
Magnavox
Toshiba
20000
20000
21008
PVR
ABS
Alienware
CyberPower
Dell
DirecTV
Gateway
Go Video
Hewlett Packard
Howard
Computers
HP
Hughes Network
Systems
Humax
Hush
iBUYPOWER
JVC
Linksys
Media Center PC
21972
21972
21972
21972
20739
21972
20614
21972
21972
21972
20739
20739
21972
21972
21279
21972
21972
13
TVNCR Combination
PVR
Microsoft
Mind
Niveus Media
Northgate
Panasonic
Philips
RCA
ReplayTV
Samsung
Sonic Blue
Sony
Stack 9
Systemax
Tagar Systems
Tivo
Toshiba
Touch
Viewsonic
Voodoo
ZT Group
21972
21972
21972
21972
20614,20616,
21244
20618,20739
20880
20614,20616
20739
20614,20616
20636,21447,
21448,21972
21972
21972
21972
20618,20636,
20739
20828,21008,
21972,21996
21972
21972
21972
21972
TVNCR Combination
Aiwa
Amstrad
Broksonic
Citizen
Curtis Mathes
Daewoo
Emerson
Ferguson
Fidelity
Funai
GE
GoldStar
Grundig
Harley Davidson
Hitachi
Hypson
Kambrook
LG
Lloyd's
Loewe
Magnasonic
Magnavox
Memorex
Mitsubishi
Optimus
Orion
Palsonic
Panasonic
Penney
Philips
14
20000
20000
21479
21278
20035,21035
21278
21278,21479
20000
20000
20000
20035, 20060,
20807, 21035,
21060
20037,21237
20081
20000
20000
20037
20037
20037, 21237
20000
20037
21278
20000,20081,
21781
20037,20162,
21162,21237
20043, 20081,
20807
20162,21162
21479
20000
20035,20162,
21035,21162
20035,20037,
21035,21237
20081
Quasar
Radiola
RadioShack
RCA
Saba
Samsung
Sansui
Sanyo
Schneider
Sears
Sharp
Shivaki
Siemens
Sony
Supra
Sylvania
Symphonic
Teac
Technics
Thomas
Toshiba
Zenith
20035, 20162,
21035,21162
20081
20000
20035,20060,
20807,21035,
21060
20320
21014
20000,21479
21330
20000,20081
20000,20037,
21237
20037,20807
20037
20081
20000, 20032,
21232,21296
20348
20081,21781
20000
20000,20037,
20642
20081
20000
20845,21145
20000,21479
Denon
DKK
DMX Electronics
Dual
Dynaco
Fisher
Genexxa
Goldmund
Grundig
Harman/Kardon
Hitachi
Inkel
Integra
Jerrold
JVC
Kenwood
KLH
Krell
Linn
Loewe
Magnavox
Marantz
Matsui
MCS
CD
Acoustic Research
Advantage
Aiwa
Arcam
Audio Research
Audiolab
Audiomeca
Audioton
AVI
Balanced Audio
Technology
Burmester
Bush
Cairn
California Audio
Labs
Cambridge
Cambridge Audio
Cambridge
Soundworks
Carver
CCE
CDC
CEC
Curtis Mathes
Cyrus
CD
Garrard
70420
70032
70157
70157
70157
70157
70157
70157
70157
70157
70420
70388
70157
Memorex
Meridian
Micromega
Miro
Mission
Modulaire
MTC
Myryad
NAD
Naim
NSM
70029, 70303
70157
70157
Onkyo
70157
Optimus
70157
70157
70420
70420, 70435
70032
70157
70003, 70034,
70626, 70766,
70873
70000
70157
70003
70157
70000
Panasonic
Parasound
Penney
Philips
Pioneer
Polk Audio
Proceed
Proton
QED
Quad
70420
70000, 70032,
70037
70157
70157
70100,70157
70032
70157,70180
70101, 70102,
70138, 70381,
70868, 71322,
71323,71327,
71808,71817
70003
70032, 70072
70000, 70028,
70029, 70036,
70037,70157,
70190, 70626,
70681,70826
71711
70157
70157
70157
70038,70157,
70274
70029, 70038,
70157,70180,
70435, 70626
70157
70029
70000, 70032,
70180,70420
70157
70157
70000
70157
70000, 70032,
70087,70180,
70420
70420
70157
70000, 70721
70157
70157
70101, 70102,
70138,70381,
70868, 71322,
71323,71327,
71808,71817
70000,70032,
70037,70087,
70420
70029, 70303,
70388, 70752
70420
70029
70157,70274,
70626
70032, 70101,
71062,71087
70157
70420
70157
70157
70157
CD Recorder
CD
Quasar
Radiola
RadioShack
RCA
Realistic
Restek
Revox
Roksan
Rotel
Royal
SAE
Saisho
Sansui
Sanyo
SAST
Sharp
Sherwood
Siemens
Silsonic
Simaudio
Sonic Frontiers
Sony
Sugden
Sylvania
Symphonic
TAG McLaren
Tandy
Tascam
Teac
Technics
Techwood
Thomson
Thorens
Thule Audio
Tokai
Traxdata
Universum
Victor
Wards
Yamaha
Yorx
Zonda
70029
70157
70000, 70032,
70180, 70420
70032, 70053,
70420,71062
70000, 70032,
70087,70180,
70420
70157
70157
70420, 70435
70157,70420
70420
70157
70000
70000,70157
70000, 70087
70157
70034, 70037,
70180,70861
70180
70157
70036, 70888
70157
70157
70000,70100,
70185,70490,
71364
70157
70157
70180
70157
70032
70420
70180,70420,
70435, 70490
70029, 70303
70303
70053
70157
70157
70420
70626
70053, 70157
70072
70000,70032,
70053,70087,
70157
70032, 70036,
70490, 70868,
70888,71292
70000
70157
Denon
JVC
Kenwood
Marantz
Onkyo
Philips
Pioneer
RCA
Sony
Teac
Thomson
Yamaha
Satellite Set Top Box
70626, 70766
70072
70626
70626
71322,71323
70626
71062,71087
70053, 70420
70000,70100,
71364
70420
70053
70888, 71292
MD
Denon
Kenwood
Onkyo
Sharp
Sony
Yamaha
70873
70681,70826
70868,71808
70861
70185,70490
70490, 70888
Onkyo
Optimus
Panasonic
Philips
Pioneer
Polk Audio
Radiola
RCA
Revox
Sansui
Sony
Technics
Technovox
Thorens
Victor
Wards
Yamaha
40029,40197
40076
40029
40029
40076
40029
40029,40182
40070
40244
40070
40029
40029
40029
40100,40135,
40136,40150,
40282, 40362,
40456, 40520,
42157
40027
40229
40029,40229
40027
40029
40029
40027
40029
40029
40243
40229
40229
40029
40244
40027,40029
40097
Onkyo RI Dock
Onkyo
01300
01334
ADB
Akai
Alba
Allsat
00642,00887
00200
01284
00200
01232,01334,
01412
00772
00847,01113,
01175
01672
00200
01300
00200
01334
00853
00173,01100,
01113
01300
01334
01672
00642, 00879,
01433
00642,00879,
01176
01457
01412
00775
01457
01284
00173
01232
01251
01672
Allvision
AlphaStar
Amstrad
Apro
Armstrong
Arnion
Asat
ASCI
AssCom
Astro
Atsat
AtSky
Audioline
Aurora
Cassette Deck
Aiwa
Arcam
Audiolab
Carver
Denon
Grundig
Harman/Kardon
Inkel
JVC
Kenwood
Magnavox
Marantz
Myryad
@sat
@Sky
181993,82990
Austar
Axil
B@ylronic
Bell ExpressVu
Big Sat
Black Diamond
Blaupunkt
Boca
Boston
Brainwave
British Sky
Broadcasting
BskyB
Bush
Canal
Canal Digital
Canal Satellite
Canal+
Centrex
CGV
Chaparral
Chess
CityCom
Classic
Comag
Coship
Crown
Cyfra+
Cyrus
D-box
Digifusion
Digihome
DigiLogic
DigiQuest
DigiSat
Digisky
Digiturk
00847,01175
00847,01175
01284,01645,
01672
00853
00853
00853
00853
01457
01567
00216
01334,01626
01176,01232
01672
01232,01412
01457
01284
01076
00200
00723,01114
01645
01284
01284
01300,01457
01232
01457
01076
15
Satellite Set Top Box
00099,00247,
00566,00639,
00749,00819,
01076,01108,
01142,01377,
DirecTV
01392,01414,
01442,01639,
01640,01749,
01856
Dish Network
00775, 01505,
System
01775
00775, 01505,
Dishpro
01775
DNT
00200
Dream Multimedia 01237
00642, 00879,
DSTV
01433
Durabrand
01284
00775, 00853,
Echostar
01323, 01409,
01505,01775
Elap
01567
Elta
00200
01251
Engel
Esat
00879
01251
EuroLine
Expressvu
00775,01775
Ferguson
01291
01251,01457
FMD
00879, 01176
Foxtel
00173,01214,
Fuba
01251
Funai
01377
Galaxis
00853,00879
GbSAT
01214
GE
00566
Gecco
01412
General Satellite
01176
01251,01334,
Globo
01412,01626
GOD Digital
00200
GOI
00775,01775
Gold Box
00853
01284, 01291
Goodmans
Gradiente
00099, 00887
Grandin
01626
00173,00847,
Grundig
00853, 00879,
01284, 01291
Hanseatic
01100
Hauppauge
01672
HB
01214
Hills
01232
00173,01232,
Hirschmann
01412
00749,00819,
Hitachi
01284
Homecast
01214
Hornet
01300
Houston
00775
00775,01775
HTS
Hughes Network
00749, 01142,
Systems
01442, 01749
01176, 01427,
Humax
01808
16
Satellite Set Top Box
10 Digital
01176
Imperial
01334,01672
Indovision
00887
Innova
00099
Interstar
01214
ISkyB
00887
ITT Nokia
00723
Jadeworld
00642
Jaeger
01334
00492, 00775,
JVC
01775
Kaon
01300
00173,00200,
Kathrein
01416,01567
Kenwood
00853
Kreiselmeyer
00173
L&S Electronic
01334
LaSAT
00173
Lemon
01334
Lenoxx
01611
LG
01414
Listo
01626
Lodos
01284
Logik
01284
Magnavox
00722
Marantz
00200
Maspro
00173
00173,01284
Matsui
Maximum
01334
Mediabox
00853
Mediacom
01206
MediaSat
00853
01232,01334,
Medion
01412,01626
Mega
00200
Metronic
01334
Metz
00173
Mitsubishi
00749
00200,01232,
Morgan's
01412
MTEC
01214
00642,00879
Multibroadcast
00642,00879,
Multichoice
01433
Myryad
00200
NEOTION
01334
Netsat
00099,00887
Neuling
01232
00200,00723
Nikko
00723, 00853,
Nokia
01223
Nordmende
01611
OctalTV
01505
Omega
00887
Opentel
01232,01412
Optex
01611,01626
Optus
00879
01232,01334,
Orbis
01412
Orbitech
01100
P/Sat
01232
Satellite Set Top Box
00200, 00329,
00847,00853,
Pace
00887,01175,
01323,01423
Pacific
01284
Palcom
01409
Panasat
00879,01433
00247,00701,
Panasonic
00847,01304
Panda
00173
peeKTon
01457
00099, 00173,
00200, 00722,
00749,00775,
00819,00847,
Philips
00853,00887,
01076, 01114,
01142,01442,
01672,01749
Pino
01334
00329,00853,
01142, 01308,
Pioneer
01442
01611
PMB
01113
Preisner
Premier
00723,00853
Proscan
00566
Radiola
00200
RadioShack
00566,00775
01113
Radix
00143,00566,
00775,01142,
RCA
01291,01392,
01442
Rebox
01214
Regal
01251
RFT
00200
Roadstar
00853
Rownsonic
01567
SAB
01251
Saba
00820
Sagem
00820,01114
00853, 01108,
01142,01206,
01276,01377,
Samsung
01442,01458,
01570
Sat Control
01300
01409
SAT+
Satelco
01232
Satplus
01100
Schaub Lorenz
01214
01206, 01251
Schneider
01334,01412,
Schwaiger
01457
Sedea
Electronique
SEG
Serd
Servimat
ServiSat
Siemens
SKY
Sky Brazil
01206,01626
01251,01626
01412
01611
01251
00173,01334
00099,00847,
00887,01175,
01856
00887
Satellite Set Top Box
SKY Italia
00853
Sky XL
01251,01412
Sky+
01175
01334,01409,
Skymaster
01567,01611
Skymax
00200
01232,01334,
Skyplus
01412
Skyvision
01334
SL
01672
SM Electronic
01409
Smart
01113,01232
00639,00847,
00853, 01558,
Sony
01639, 01640
Star
00887
Star Trak
00772
Starlite
00200
00820,00853,
00879,01284,
Strong
01300, 01409,
01626
Sunny
01300
Sunstar
00642
00887
Supernova
Systec
01334
Teac
01251
TechniSat
01100,01195
Technosat
01206
Technosonic
01672
Techwood
01284,01626
Tele System
01251,01409,
Electronic
01611
01100,01251,
Telestar
01334,01626,
01672
01214, 01300,
Televes
01334
Televisa
00887
Telewire
01232
Tevion
01409,01672
00566. 00820,
00847, 00853,
Thomson
01046,01175,
01291
Tiny
01672
Tivo
01142,01442
Tokai
00200
Tonna
01611
Topfield
01206,01208
00749,00790,
Toshiba
01284,01749
TPS
00820
00200, 00853,
01113,01251,
Triax
01291,01611,
01626
Twinner
01611
UEC
00879
UltimateTV
01392,01640
Uniden
00722
Unisat
00200
United
01251
Universum
00173,01251
Variosat
00173
Satellite Set Top Box
Ventana
00200
Vestel
01251
Victor
00492
ViewSat
01232
Visiosat
01457
Wavelength
01232
Whar1edale
01284
Wisi
00173.01232
Worldsat
01214.01251
00847,01214,
Xsat
01323
Xtreme
01300
Yes
00887
01232,01251,
Zehnder
01334,01412
Zenith
01856
Zeta Technology
00200
DBS/PVR Combination
@sat
01300
Allvision
01412
Amstrad
01175
Atsat
01300
B@ytronic
01412
Bell ExpressVu
00775
British Sky
Broadcasting
BskyB
Bush
Comag
Digifusion
DigiQuest
Digiturk
DirecTV
Dish Network
System
Dishpro
Dream Multimedia
Echostar
Expressvu
GbSAT
Gecco
Globo
Hirschmann
Hughes Network
Systems
Humax
Kaon
Maximum
Mediacom
Medion
Morgan's
MTEC
NEOTION
Opentel
Orbis
Pace
Panasonic
01175
01175
01645
01412
01645
01300
01076
00099,00639.
01076,01142,
01377,01392,
01442,01640
00775,01505
00775,01505
01237
00775,01505
00775
01214
01412
01412
01412
01142,01442
01176,01427,
01808
01300
01334
01206
01412
01412
01214
01334
01412
01412
01175,01423
01304
DBS/PVR Combination
00099,01142,
Philips
01442
01392
RCA
01214
Rebox
01206,01442,
Samsung
01570
Sat Control
01300
Schneider
01206
01412
Schwaiger
Sedea
Electronique
Serd
SKY
Sky XL
Skyplus
Sony
Strong
Sunny
TechniSat
Technosat
Thomson
Topfield
Xtreme
Zehnder
01206
01412
01175
01412
01334,01412
00639,01640
01300
01300
01195
01206
01175
01206
01300
01412
Cable Set Top Box
00008,00144,
A-Mark
00277
ABC
00008,00237
Acorn
00237
Action
00237
Active
00237
Amstrad
01222
Archer
00237
Auna
00277
Austar
00276
BCC
00276
Birmingham Cable
00276
Communications
00008
Century
00008,00277.
00877,01877
Digeo
01187
Director
00476
DX Antenna
01500
Encon
00008
00276
Fosgate
Foxtel
01222
France Telecom
00817
Freebox
01482
Fujitsu
01497
Galaxi
00008
00144,00237
GE
00476
Gehua
00276, 00476.
General Instrument
00810
00144
GoldStar
Hitachi
00008
00476,00810
Insight
00276, 00476.
Jerrold
00810
Kloss
00277
KNC
00008
Daeryung
17
Cable Set Top Box
00144
00817
Memorex
00000
00276,00476,
00810,01187,
Motorola
01376
01496
NEC
00277
NET
Noos
00817
Nova Vision
00008, 00277
Novaplex
00008, 00277
00276,00277,
NTL
01060
Optus
00276,01060
00008,00237,
Pace
00877,01060,
01577,01877
Panama
00107
00000, 00008,
Panasonic
00107,00144,
01488
00000, 00008,
Paragon
00525
Penney
00000
00317,00817,
Philips
01305
00144, 00533,
Pioneer
00877,01021,
01500, 01877
Pulsar
00000
Quasar
00000
Regal
00276
Runco
00000
Sagem
00817
Salora
00000
00000,00144,
Samsung
01060,01666
00000, 00008,
Scientific Atlanta
00237,00277,
00877,01877
Sony
01006,01460
Sprucer
00144
StarHub
00276
Sumitomo
01500
Supercable
00276
Time Warner
01877
Toshiba
00000, 01509
Trans PX
00276
United Cable
00276
00008, 00276,
US Electronics
00277
Videoway
00000
Visiopass
00817
00000,00008,
Zenith
00525
LG
Macab
18
Cable/PVR Combination
Digeo
01187
Freebox
01482
General Instrument 00810
Jerrold
00810
00810,01187,
Motorola
01376
Pace
00237,01877
Pioneer
00877,01877
Scientific Atlanta
00877,01877
Sony
01006
Supercable
00276
Time Warner
01877
Memo
19
107960
10801-1
SN 29344636
(C) Copyright 2008 ONKYO CORPORATION Japan. All rights reserved.
11111111111111111111111111111111111111111111111111
*
2 9 344 6 3 6
*
SIRIUS~~
SATELLITE RADIO
WELCOME TO THE BEST RADIO ON RADIO™
CL
[
Including Pop, Rock, Country, Hip-Hop, R&B, Jazz,
Blues, Classical, and Latin plus legendary DJs, original
MTY YJs, exclusive live performances, and channels
produced by music icons
B
AL
& EXPERT
NFL, NASCAR~ NBA, NHL~ plus superior college
sports coverage
LIE T
TA
Howard Stern, ''The Foxxhole" produced by Jamie
Fox, Maxim Radio, Martha Stewart, Cosmo Radio
and more
Fox, CNN, NPR~ BBC plus local traffic & weather
It's G-rated fun for everyone with Radio Disney,
Kids Stuff and Laugh Break Comedy-plus SIRIUS
allows you to block out channels with mature
programming at the time of activation or through
channel locks on select models
F
k.
I
I
Subscribers listen online to 100% commercial-free
music, Howard Stern, Martha Stewart and more
Product Registration
Thank you for purchasing this Onkyo product. In order to protect your investment
and to receive information on new products and updates, please register.
1
Quick and Easy!
Register Online at
www.onkyousa.com
2
Shop at www.shoponkyo.com
and Receive
valuable benefits
Online Customer Support
www.onkyousa.com can assist you
anytime with Frequently Asked
Questions, Hookup Diagrams,
and Service Information
We offer Product Support 7 days per week
Onkyo has extended its product support hours to a seven-day schedule.
For questions, assistance, or comments, please call us or visit on our website at:
Phone: 1-800-229-1687
Web address: www.onkyousa.com!support
Hours of Operation:
Mon - Fri 9:00am - 8 pm (Eastern Standard Time)
Sat - Sun 10:00am - 4 pm (Eastern Standard Time)
OBTAINING WARRANTY SERVICE
To obtain warranty service, take or ship your Onkyo product to an Onkyo authorized independent service center, tog"ther with a now de,uibincj your cornplairH and your copy of
the dated purchase receipt. If you choose to ship your Onkyo product to an Onkyo authorized independent service center, all shipping arrangements must be made by you Jnd
all shipping charges and insurance must be fully prepaid, Onkyo product should be shipped in its entirety and in Its original carton, Onkyo will pay dll return shipping charges for
Onkyo products that hi1ve been serviced under this warranty, To locate an authorized independent service center, you can contact Onk'lOS customer serVice department or check
the dealer and service locator at our web site: www.onkyousa.com
POST OFFICE
WILL NOT
DELIVER
WITHOUT
PROPER POST.A,GE
REGISTRATION DEPARTMENT
ONKYO USA CORPORATION
18 PARK WAY
UPPER SADDLE RIVER. NJ 07458 USA
ONKYO,
r -
-
-
l
I
I
I Tape here I
Onkyo USA Limited Warranty
Please retain your original bill of sale. You will need to present it should you require service under this warranty.
On kyo USA corporation (hereinafter referred to as Onkyo) hereby warrants all Onkyo Products
sold by Onkyo or Onkyo Authorized Dealer in the United States of America in accordance with the following terms and conditions:
WARRANTY PERIOD:
Receivers and Amplifiers
Speakers
CDDVD Players &Tape Decks
CD, DVD Receiver Combos
Mini Systems
Multimedia Products, AudiolVideo Accessories
TV Stand with built in speakers
2 years Parts & Labor
2 years Parts & Labor
2 years Parts & Labor
2 years Parts & Labor
2 years Parts & Labor
1 year Parts & Labor
1 year Parts & Labor
SCOPE OF WARRANTY:
From the date of original purchase and for respective periods specified above, Onkyo agrees to repair at its sole expense, all Onkyo
products purchased directly from Onkyo or an Onkyo Authorized Dealer in the United States of America, which are defective in
material and/or workmanship.
EXCLUSIONS: This Warranty does not apply with respect to the following:
1.
Defects or damage caused by accident, fire, flood, lightning or other acts of nature.
2.
Defects or damage caused by abuse, misuse, negligence or failure to observe the instructions contained in the manual furnished
at the time of original purchase.
3.
Damage caused during shipment or handling.
4.
Products purchased from anyone other than Onkyo or an Onkyo authorized dealer. If you are uncertain as to whether a dealer is authorized,
please contact Onkyo's Customer Service Department or check the Dealer and Service Locator at our web site: http://www.onkyousa.com
5.
Products that have had their serial numbers altered or removed.
6.
Products purchased in 'AS IS' condition.
7.
Products that have been altered or repaired by anyone other than Onkyo or an Onkyo authorized service center
in a manner that has affected their performance, stability or reliability.
8
Accessories attached to or to be used with Onkyo products, such as antennas, cables, etc.
9.
Packing materials, batteries, antennas & cosmetic items.
10. Parts which have prescribed useful lives dependent upon the degree of their use, such as stylus, cassette heads, idler wheels, etc.
11. Installation & removal of Onkyo products.
12. Maintenance, cleaning or periodic check-ups.
13. Adjustments or alteration required for compatibility with conditions pertaining to foreign countries.
14. Products used continuously or for commercial applications. Onkyo products are intended for consumers' use and are not designed for continuous or
commercial use. In the event that the products concerned have been used commercially or continuously, the warranty period is limited to 90 days
from the date of purchase. This exclusion does not apply to the Onkyo Pro product line.
LIMITATIONS:
Onkyo makes this warranty subject to the following limitations:
1. This warranty is valid only within the territory of the United States of America. To be covered by this warranty the Onkyo product concerned
must have been originally purchased from Onkyo or an Onkyo authorized dealer in the United States of America
or in the District of Colombia. Onkyo products used outside of the USA are not covered by this warranty. This warranty extends to the original
purchaser and cannot be transferred to anyone.
2. ONKYO SHALL HAVE NO LIABILITY WHATSOEVER FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. THE RESPONSIBILITY OF ONKYO UNDER
Model
SenalNu
Customer's Name
Dealer's Name
THIS WARRANTY SHALL BE LIMITED TO THE REPAIR OF DEFECTIVE ONKYO PRODUCTS BY ONKYO OR ITS AUTHORIZED SERVICE CENTERS.
3. This warranty is valid only with respect to repairs effected by Onkyo or an Onkyo Authorized independent Service Station.
4.
Date of Purchase
ALL WARRANTIES OTHER THAN THE EXPRESS WARRANTY HEREIN CONTAINED INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
S Warranty repairs do not extend the original warranty period.
Some states do not allow limitations on how long an implied warranty lasts and some states do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights and you may
also have other rights that vary from state to state.
ONKYO USA CORPORATION
18 Park Way
Upper Saddle River, NJ 07458 USA
Phone:
201-785-2600
Fax
201-785-2650
Internet:
www.onkyousa.col1l
NK¥
Product REGISTRATION CARD
®
Thank you for purchasing this Onkyo product. In order to protect your investment
Online Registration
Quick and Easy
and to ensure that you receive information on new products, future updates or new
releases, please register your product.
Please visit our web site
for your online registration at:
Please remember to keep
your receipt of your purchase
for warranty and the other
part of this card for future
reference.
www.onkyousa.com
Or please fill out this registration
card and return it to us.
Model Number
How did you learn about this product?
Magazine
First Name
Last Name
Middle Initial
Apt/Suite Number
Internet' ,Salesman
: Sound
State
Zip
Other
Quality
Design"
Price
Recommendation
Other
What other AudiolVideo equipment did you purchase with this products?
. Flat TV" 'Other TV
City
Friend
What factors influenced your purchase decision?
'Features
Street Address
Serial Number (10 Digit)
;VCR
DVD Player
: CD Player/Recorder
HD Recorder
Portable Player
Satellite Tuner
Other
What other AudiolVideo equipment are you planning to buy in next 12 months?
E-mail Address
Phone Number
: Flat TV,
)
(
~~-~~----------~--
VCR
CD Player/Recorder
HD Recorder
Portable Player
Satellite Tuner
Other
------------
Age
Under 20
Other TV; DVD Player
Gender
21-30
31-40
41-60
61 +
, Male
~
Female
ONKYO USA CORPORATION
18 Park Way Upper Saddle River, NJ 07458 USA
Phone: 201-785-2600
Fax: 201-785-2650 Internet:
www.onkyousa.com