Smart-UPS APC Smart-UPS 2200VA USB & Serial RM 2U 120V APC Smart-UPS, 1980 Watts / 2200 VA,Input 120V / Output 120V, Interface Port DB-9 RS-232, SmartSlot, USB, Rack Height 2 U Includes: CD with software, Rack Mounting support rails, Smart UPS signalling RS-232 cable, USB cable, User Manual Standard Lead Time: Usually in Stock SUA2200RM2U Features Replace Battery LED An external Replace Battery LED informs the end-user that the battery needs to be replaced. Pure sinewave battery Prevents interruptions, lost pre-sets, missed DVR recordings, lost multimedia backup server data and premature projector bulb wear and tear when the power goes out. Global safety UL60950, CSA60950, IEC60950, EN60950 safety approvals. Meets IEC approvals 61000-4-5 Immunity To Surge, and GR-1089-CORE, Section 4, Lightning and AC Power Faults standards. Field-replaceable Ensures compatibility with equipment that has different plug types. power distribution panel USB Connectivity Provides management of the UPS via a USB port (not available on all models). Plug-and-Play installation Smart-UPS Features & Benefits Availability Boost and Trim Automatic Voltage Regulation (AVR) Intelligent Battery Management Power conditioning Temperaturecompensated battery charging Automatic restart of loads after UPS shutdown Automatic self-test Gives higher application availability by correcting low and high voltage conditions without using the battery. Maximizes battery performance, life, and reliability through intelligent, precision charging. Protects connected loads from surges, spikes, lightning, and other power disturbances. Prolongs battery life by regulating the charge voltage according to battery temperature. Automatically starts up the connected equipment upon the return of utility power. Periodic battery self-test ensures early detection of a battery that needs to be replaced. Cold-start capable Provides temporary battery power when the utility power is out. Disconnected battery Warns when a battery is not available to provide backup power. notification Generator Compatible Ensures clean, uninterrupted power to protected equipment when generator power is used. Manageability Network manageable Provides remote management of the UPS over the network. SmartSlot Customize UPS capabilities with management cards. Audible Alarms Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition. LED status indicators Quickly understand unit and power status with visual indicators. Serial Connectivity Provides management of the UPS via a serial port. USB Connectivity Provides management of the UPS via a USB port (not available on all models). Disconnected battery Warns when a battery is not available to provide backup power. notification InfraStruXure Enables centralized management via the APC InfraStruXure® Manager. Manager Compatible Serviceability User-replaceable batteries Hot-swappable batteries Predictive failure notification Resettable circuit breakers Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR) Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Provides early-warning fault analysis ensuring proactive component replacement. Enables a quick recovery from overload events. Adaptability Adjustable voltagetransfer points Adjustable voltage sensitivity Field-replaceable power distribution panel Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Ensures compatibility with equipment that has different plug types. Safety Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. UL, FCC, CE, C-Tick approvals. Output Output Power Capacity 1980 Watts / 2200 VA Max Configurable Power 1980 Watts / 2200 VA Nominal Output Voltage 120V Efficiency at Full Load 95% Output Voltage Distortion Less than 5% at full load Output Frequency (sync to mains) 47 - 53 Hz for 50 Hz nominal,57 - 63 Hz for 60 Hz nominal Crest Factor up to 5 : 1 Waveform Type Sine wave Output Connections (6) NEMA 5-15R (2) NEMA 5-20R Input Nominal Input Voltage 120V Input Frequency 50/60 Hz +/- 3 Hz (auto sensing) Input Connections NEMA 5-20P Cord Length 2.44 meters Input voltage range for main operations 82 - 144V Input voltage adjustable range for 75 - 154V mains operation Batteries & Runtime Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof Typical recharge time 3 hour(s) Replacement Battery RBC43 RBC™ Quantity 1 Typical Backup Time at Half Load 15.7 minutes (990 Watts) Typical Backup Time at Full Load 5.2 minutes (1980 Watts) Runtime Chart Smart-UPS Communications & Management Interface Port(s) DB-9 RS-232,SmartSlot,USB Available SmartSlot™ Interface Quantity 1 Control panel LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : and Overload Indicators Audible Alarm Alarm when on battery : distinctive low battery alarm : configurable delays Emergency Power Off (EPO) Yes Surge Protection and Filtering Surge energy rating 480 Joules Filtering Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 Physical Maximum Height 89.00 mm Maximum Width 483.00 mm Maximum Depth 660.00 mm Rack Height 2U Net Weight 43.64 KG Shipping Weight 56.82 KG Shipping Height 254.00 mm Shipping Width 622.00 mm Shipping Depth 980.00 mm Color Black Units per Pallet 8.00 Environmental Operating Environment 0 - 40 °C Operating Relative Humidity 0% Operating Elevation 0-3000 meters Storage Temperature -15 - 45 °C Storage Relative Humidity 0% Storage Elevation 0-15000 meters Audible noise at 1 meter from surface of unit 47.00 dBA Online Thermal Dissipation 300.00 BTU/hr Protection Class -- Conformance Regulatory Approvals BSMI,CSA,UL 1778,FCC Part 15 Class A Standard Warranty 2 years repair or replace,optional on-site warranties available,optional extended warranties available ROHS/WEEE Compliance RoHS 7b Exemption **The time to recharge to 90% of full battery capacity following a discharge to shutdown using a load rated for 1/2 the full load rating of the UPS.