Altigen | AltiServ TM 4.5 | Specifications | Altigen AltiServ TM 4.5 Specifications

Call Detail
Reporting
for AltiWare ACC Release 5.2
and AltiWare ACM Release 5.2
Manual
Revised 2/2008 4403-0012-5.2
WARNING!
Toll fraud is committed when individuals unlawfully gain access to
customer telecommunication systems. This is a criminal offense.
Currently, we do not know of any telecommunications system that is
immune to this type of criminal activity. AltiGen Communications, Inc.
will not accept liability for any damages, including long distance charges,
which result from unauthorized and/or unlawful use. Although AltiGen
Communications, Inc. has designed security features into its products, it is
your sole responsibility to use the security features and to establish security
practices within your company, including training, security awareness, and
call auditing.
NOTICE
While every effort has been made to ensure accuracy, AltiGen
Communications, Inc. will not be liable for technical or editorial errors or
omissions contained within the documentation. The information contained
in this documentation is subject to change without notice.
This documentation may be used only in accordance with the terms of the
AltiGen Communications, Inc. License Agreement.
AltiGen Communications, Inc.
4555 Cushing Pkwy.
Fremont, CA 94538
Telephone: 510-252-9712
Fax:
510-252-9738
E-mail:
info@altigen.com
Web site:
www.altigen.com
TRADEMARKS
AltiGen, AltiServ, AltiWare, AltiContact Manager, AltiLink, AltiConsole,
AltiAdmin, ACM Admin, AltiVR Player, Zoomerang, IPTalk, AltiReport,
and SuperQ are trademarks or registered trademarks of AltiGen
Communications, Inc.
All other brand names mentioned are trademarks or registered trademarks
of their respective manufacturers.
Copyright © AltiGen Communications, Inc. 2008. All rights reserved.
4403-0012-5.2
Contents
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
CHAPTER 1
Installing CDR Search on a Client System . . . . . . . . . . . . . . . 1
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Hardware Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Pre-Installation Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
To install CDR Search on a Client Machine . . . . . . . . . . . . . . . . . . 2
Installation Note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Uninstalling CDR Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Downgrade Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
CHAPTER 2
Using CDR Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Logging In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Running a Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
CDR Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Group CDR Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Workgroup Statistics Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Search Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Summary (CDR Search and Group CDR Search) . . . . . . . . . . . 18
Call Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Statistics (WG Statistics) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Exporting Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Printing Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CHAPTER 3
CDR Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Real-Time Monitoring and the CDR Client . . . . . . . . . . . . . . . . . . 25
The RTM Statistics Database . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
CDR Manual
i
Internal Database Configuration (Internal Logger Service). . . .
External (Remote) Logging of Call Data . . . . . . . . . . . . . . . . . .
Call Center Events and CDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Past and Present CDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configuration Areas Affecting CDR Information . . . . . . . . . . . . .
Routing and Route Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Multi-Project Naming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wrapup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ring No Answer Configurations and VM . . . . . . . . . . . . . . . . .
Login and Log-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Conference Call Limitation . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing Time Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
27
28
29
29
30
30
30
31
31
31
31
32
CHAPTER 4
Data Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Common Features of ILS and ELS . . . . . . . . . . . . . . . . . . . . . . . .
Differences between ILS and ELS . . . . . . . . . . . . . . . . . . . . . . . .
Internal Logger Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
External Logger Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Logger Service Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . .
External Logger Server Configuration Tool . . . . . . . . . . . . . . . . .
Configuration GUI for External Logger Server . . . . . . . . . . . . .
Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
33
34
34
34
34
35
36
37
CHAPTER 4
CDR and Workgroup CDR Search — Typical Searches . .39
Example Call Sequences and their Effect on CDR Records . . . . . 42
CHAPTER 5
Records and Data Schema . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Search Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
ii
CDR Manual
Warranty
What The Warranty Covers
AltiGen Communications warrants its hardware products to be free from defects in material
and workmanship during the warranty period. If a product proves to be defective in material
or workmanship during the warranty period, AltiGen Communications will, at its sole option,
repair, refund or replace the product with a like product.
How Long the Warranty Is Effective
All AltiGen Communications products are warranted for one year for all parts from the date
of the first end user purchase.
Whom the Warranty Protects
This warranty is valid only for the first end user purchaser.
What the Warranty Does Not Cover
1.
Any product on which the serial number has been defaced, modified or removed.
2.
Damage, deterioration or malfunction resulting from:
a) Accident, misuse, neglect, fire, water, lightning, or other acts of nature,
unauthorized product modification, or failure to follow instructions supplied with
the product.
b) Repair or attempted repair by anyone not authorized by AltiGen Communications.
c) Any damage of the product due to shipment.
d) Removal or installation of the product.
e) Causes external to the product, such as electric power fluctuations or failure.
f) Use of supplies or parts not meeting AltiGen Communications’ specifications.
g) Normal wear and tear.
h) Any other cause which does not relate to a product defect.
3.
Shipping, installation, set-up and removal service charges.
How to Obtain Service
End user customers should contact your Authorized AltiGen Dealer for service.
Authorized AltiGen Dealers must follow the steps below for service:
CDR Manual
iii
1.
Take or ship the product (shipment prepaid) to your AltiGen distributor or to AltiGen
Communications, Inc.
All materials being returned to AltiGen must have an associated RMA number. RMA numbers
are issued by AltiGen Customer Service and can be obtained by calling 1-888-ALTIGEN
(258-4436) or faxing an RMA form to 510-252-9738, attention to Customer Service. AltiGen
reserves the right to refuse return of any material that does not have an RMA number. The
RMA number should be clearly marked on the outside of the box in which the material is being
returned. For example:
Attn.: RMA # 123
AltiGen Communications, Inc.
4555 Cushing Pkwy.
Fremont, CA 94538
Upon authorization of return, AltiGen will decide whether the malfunctioning product
will be repaired or replaced.
2.
To obtain warranty service, you will be required to provide:
a) the date and proof of purchase
b) serial number of the product
c) your name and company name
d) your shipping address
e) a description of the problem.
3.
For additional information contact your AltiGen Dealer or AltiGen Communications, Inc.
via e-mail at support@altigen.com.
Effect of State Law
This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state. Some states do not allow limitations on implied warranties and/or do not
allow the exclusion of incidental or consequential damages, so the above limitations and
exclusions may not apply to you.
Sales Outside the U.S.A.
For AltiGen Communications products sold outside of the U.S.A., contact your AltiGen
Communications dealer for warranty information and services.
iv CDR Manual
CHAPTER 1
CDR Search is a client application that lets you search a Call Detail
Reporting database. You can install CDR Search on either the system
server or on an administrator client desktop. CDR Search 5.2 works only
with AltiWare ACC 5.2 or AltiWare ACM 5.2.
Important: AltiWare client programs earlier than 5.2 cannot be installed in
the same PC running 5.2 client programs.
System Requirements
The client system must meet the following minimum requirements.
• IBM/PC AT compatible system
• 1G Hz CPU or above
• Windows XP Professional with SP2 or Windows Vista Business
Edition
• 250 MB available hard drive disk space
• 256 MB RAM
• SVGA monitor (800 x 600) with 256 color display, or better
• Keyboard and mouse
• AltiWare ACC/ACM 5.2 running on a server accessible to this client.
Hardware Requirements
• External database server should be at least Pentium 4, 1 GHz with
512M RAM.
Important: Refer to “Limitations” on page 37 for a list of limitations for
CDR Search.
CDR Manual 1
Using CDR Search
Installing CDR Search on a Client
System
Pre-Installation Checklist
Pre-Installation Checklist
Before installing CDR Search, make sure the following is done:
• AltiWare ACC 5.2 or AltiWare ACM 5.2 has been installed on the
system server.
• TCP/IP is enabled on both machines.
• The client is able to connect to the server on the network.
• The person installing CDR Search has local administrator rights on the
client PC.
To install CDR Search on a Client Machine
1.
Log in to the client machine using a domain account and make sure it
is connected to the network on which the system is running.
2.
Exit all Windows applications.
3.
Insert the AltiWare CD into the CD ROM drive.
4.
In the CDR > CDRSearch_Client folder, run Setup.exe. Follow the
step-by-step installation instructions as they appear on the screen.
Installation Note
If CDR Search is running outside of a network and is used to query internal
databases, ports 10025, 10027 and 10029 need to be opened.
Uninstalling CDR Search
1.
From the Windows Start menu, select Programs > CDR Search >
Uninstall CDR Search 5.2.
2.
Click OK when the dialog box asks if you want to uninstall the
program, and respond to any additional prompts.
Downgrade Procedure
1.
Go to Control Panel > Add/Remove Programs and remove the CDR
Search 5.2 program and ALL OTHER 5.2 client applications
(including AltiAgent, AltiView, AltiSupervisor and AltiConsole).
2.
Reboot your system.
2
CDR Manual
Installing CDR Search on a Client System
3.
Note: The AlpInterface might be located under
“\WinNT\System32\”, “\Windows\System32\” or some other
location. Use the Search for Files and Folders feature to
locate and remove all AlpInterface.dll files from the system.
4.
Install the CDR Search 5.0A or 5.1 software, as appropriate.
CDR Manual 3
Using CDR Search
Go to “<local drive>:Program Files\AltiGen\Shared Files\” and
remove AlpInterface.dll.
Downgrade Procedure
4
CDR Manual
CHAPTER 2
CDR client offers three ways to search call records.
• CDR Search lets you define a search by the type of call, incoming or
outgoing. To perform this search, you must log in as the administrator.
• Group CDR lets you specify a search by workgroup. To perform this
search, you can log in as the administrator or as a workgroup
supervisor.
• WG Statistics lets you search workgroup call data captured from the
real-time monitoring functions in the Workgroup Statistics tab of the
AltiSupervisor client. To perform this search, you can log in as the
administrator or as a workgroup supervisor.
Logging In
There are two ways to log in to CDR search:
Administrator login lets you perform all three types of searches described
above. To log in as an administrator, your extension must be designated as
the Manager Extension in AltiWare Administrator. See your system
administrator for details.
Workgroup supervisor login lets you run a Group CDR search or a WG
Statistics search. To log in as a workgroup supervisor, the option-pack
license must be installed on the server. For information on obtaining a
license, contact your authorized AltiGen dealer.
Before you log in
When you log in for the first time, you need to know either the IP address
or the name of the server you’ll be linking to. (If you use the server name
rather than the IP address, CDR Search replaces the name with the IP
address the next time you log in.)
To obtain the IP address, ask your system administrator.
Note:
If you are connecting to the Internet through a modem, establish a
connection from your PC to your ISP before you log in to CDR
search.
CDR Manual 5
Using CDR Search
Using CDR Search
Logging In
Logging in - Administrator Login
1.
From the Windows Start menu, select Programs > CDR Search >
CDR Search 5.2. The Login window appears.
2.
Enter the IP address or name of the Server.
3.
Enter your Extension and Password.
Check the Save password check box to store your login password for
the next time you access CDR Search.
Note: AltiServ maintains a counter for each extension to track login
failures. Up to 8 login attempts are allowed, after which login
will be disabled from 1 to 24 hours (depending on the
Administrator’s setting).
4.
Select Administrator login and click OK.
5.
In the CDR Server dialog box, select the database containing the data
you want to access, then click Select.
6
CDR Manual
Using CDR Search
Using CDR Search
Note: This option is available only when the external logger service
is installed on the SQL Server, and External CDR Logging is
enabled. Consult your system administrator for more
information.
Logging in - Workgroup Supervisor Login
1.
From the Windows Start menu, select Programs > CDR Search >
CDR Search 5.2. The Login window appears.
2.
Enter the IP address or name of the Server.
3.
Enter your Extension and Password.
Check the Save password check box to store your log in password for
the next time you access CDR Search.
CDR Manual 7
Logging In
Note: AltiServ maintains a counter for each extension to track login
failures. Up to 8 login attempts are allowed, after which login
will be disabled from 1 to 24 hours (depending on the settings
in AltiWare Administrator).
4.
Select Workgroup supervisor login, and click OK.
5.
In the CDR Server dialog box, select the database containing the data
you want to access, then click Select.
Note: This option is available only when the external logger service
is installed on the SQL Server, and External CDR Logging is
enabled. Consult your system administrator for more
information.
6.
8
In the Password dialog box that appears, select the workgroups you
want, enter the password for each, and click OK to open the CDR
Search main window.
CDR Manual
Using CDR Search
Using CDR Search
This will allow access to the workgroup CDR and workgroup
statistics.
If you enter an invalid password, the Password window reappears. A
red X appears before the problem workgroup. Re-enter the password
and click OK.
For multiple workgroups: If you re-enter an invalid password for
one workgroup, the CDR Search main window will open, but the
workgroup will not appear in the Workgroup drop-down and thus
will not be available as a search criterion.
CDR Manual 9
Running a Search
Running a Search
The CDR Search main window has three tabs: CDR, Group CDR, and
WG Statistics.
CDR Search
CDR Search lets you search all calls, internal and external. To perform this
search, you must log in as the administrator.
To run a CDR search:
1.
Select the time range for the search:
• User Define—the From/To fields default to a range that includes
the 10 previous days. Edit the date and time for a custom range.
• Today—sets the From/To fields to the current date.
• Last 7 Days—sets the From/To range to the previous seven days.
• Session ID—searches calls by Session ID.
2.
Select the Type of search:
Note: If searching by Session ID, enter a Session ID number in the
blank field, then press the Search button.
10 CDR Manual
Using CDR Search
Using CDR Search
• All Calls—calls involving: Auto Attendant/IVR, Ring No Answer,
Queue, Voice Mail (no VM recorded or VM recorded), Connect,
Logon, Logoff, All Trunks Busy, No session, VM Access, Forward,
Transfer, VM Notify, WG Abandoned, Park, System Park,
Conference, Call Monitor, Transfer Cancel, Call Redirect, Call
Pick Up, Dial Cancel
• Connected Calls & Messages—Connected Calls plus Messages
(see below)
• Connected Calls—incoming calls answered by a person, and
outgoing calls that entered “Connected” state
Note: For CDR records, Connected Calls refer to calls in these
states: connected, transfer, park, system park, conference
call and transfer cancel.
• Messages—incoming calls directed to voicemail
• Unanswered Calls—incoming or outgoing calls not answered by a
person
CDR Manual 11
Running a Search
Note: For CDR records, Unanswered calls refer to calls
abandoned while in these states: AA, forward, RNA,
queue, voicemail, WG abandoned, call redirect, no more
session, pick up by and dial cancel. Calls abandoned also
include all calls routed to go somewhere other than a
workgroup, where a workgroup has busy call handling set
not to queue.
• All Trunks Busy—outgoing calls aborted due to busy signals
Note: See “CDRMAIN” on page 66 for call data details.
3.
Define the type of calls in the Caller/Callee fields and enter values for
the Trunk and Extension, if applicable.
• All—searches for both incoming and outgoing calls
• To search for outgoing calls only—set Caller to Extension and
Callee to Trunk, then enter the appropriate numbers
• To search for incoming calls only—set Caller to Trunk and Callee
to Extension, then enter the appropriate numbers
• To search for internal (station to station) calls—set Caller and
Callee to Extension
Use the drop down lists (located to the right of the Caller and Callee
value fields) to further define the value match for your record search:
• Exact - retrieves records that exactly match the field value entered
• Like - retrieves records that begin with the field value entered
• Pat - retrieves records that contain the field value in any part of the
extension/trunk digits.
Example: “252” is the Callee value entered in the blank field. If exact
is selected, any record with only “252” in the Callee field is retrieved.
If like is selected with this value, any records where “252” begins the
Callee field (for example, 252-9712, 252-9713) is retrieved. If pat is
selected with this value, any records with “252” in any part of the
Callee field is retrieved (for example, 252-9712, 946-2525).
4.
In the search criteria fields, enter data for DNIS, Project, or Acct
Code as desired.
Use the drop-down lists (located to the right of the DNIS, Project and
Acct Code value fields) to further define the value match for your
record search:
12 CDR Manual
Using CDR Search
• Exact—retrieves records that exactly match the field value entered
• Pat—retrieves records that contain the field value in any part of the
DNIS/Project/Acct Code digits.
5.
Select to Sort by:
• Date/Time—sorts day-by-day (or hour-by-hour if you select Today
as the time range for the search).
• Extension—sorts by extension.
• Trunk—sorts by trunk.
• N/A—search without sorting, retrieves total number of records.
Note: For faster searching, using N/A to sort records is
recommended.
(For example, when you search for Connected Calls, the time range
as “Today,” and sorting by N/A, CDR will retrieve the total number
of connected calls for “today.”
Note:
6.
If the time range for the search is less than 1 day, and Date/Time is
selected for Sort by, CDR will list records hourly. If time range for
the search is longer than 1 day, and Date/Time is selected for Sort
by, CDR will list records daily.
Click Search. During the search, a progress window appears
.
To cancel the search, click Cancel.
7.
Search results appear in the Summary window. Refer to “Search
Results” on page 17 for details on working with search results.
CDR Manual 13
Using CDR Search
• Like—retrieves records that begin with the field value entered
Running a Search
Group CDR Search
Group CDR search lets you specify a search by group. To perform this
search, you can log in as the administrator or as a workgroup supervisor.
To run a Group CDR search:
1.
Select the time range for the search:
• User Define—the From/To fields default to a range that includes
the 10 previous days. Edit the date and time for a custom range.
• Today—sets the From/To fields to the current date
• Last 7 Days—sets the From/To range to the previous seven days
2.
Select the Type of search:
• All Calls—calls involving: Auto Attendant/IVR, Ring No Answer,
Queue, Voice Mail (no VM recorded or VM recorded), Connect,
Logon, Logoff, All Trunks Busy, No session, VM Access, Forward,
Transfer, VM Notify, WG Abandoned, Park, System Park,
Conference, Call Monitor, Transfer Cancel, Call Redirect, Call
Pick Up, Dial Cancel
Note: When searching for All Calls in WG CDR, the search
results will not include workgroup agent login/logout, as
the system does not recognize logging in/out as a call.
14 CDR Manual
Using CDR Search
• Connected Calls—incoming calls answered by agent and outgoing
calls made by agent (when an Outgoing Workgroup is selected for
the agent in the Workgroup Extension Configuration in AltiWare
Administrator).
• Messages—calls directed to voicemail
• Unanswered Calls—incoming calls not answered by agent or
workgroup (abandoned in AA, forward, RNA, queue, voicemail,
WG abandoned, call redirect, no more session, pick up by and dial
cancel). Calls abandoned also include all calls routed to go
somewhere other than a workgroup, where a workgroup has busy
call handling set not to queue.
• All Trunks Busy—outgoing calls aborted due to busy signals
• Agent Login/out—calls sorted by the login/out times of
workgroup member extension numbers
Note: See “CDRMAIN” on page 66 for call data details.
3.
Select the Workgroup whose call records you want to search.
4.
In the search criteria fields, enter data for Caller, Target, DNIS,
Project, or Acct Code as desired.
Use the drop-down lists (located to the right of the Caller, Target,
DNIS, Project or Acct Code value fields) to further define the value
match for your record search:
• Exact—retrieves records that exactly match the field value entered
• Like—retrieves records that begin with the field value entered
• Pat— retrieves records that contain the field value in any part of the
extension/trunk digits.
5.
Select to Sort by:
• Date/Time—sorts day-by-day (or hour-by-hour if you select Today
as the time range for the search)
• Agent—sorts by agent
• Workgroup—sorts by workgroup
• Trunk—sorts by trunk
• N/A—search without sorting, retrieves total number of records.
CDR Manual 15
Using CDR Search
• Connected Calls & Messages—Connected Calls plus “Messages
(see below)
Running a Search
Note: For faster searching, using N/A to sort records is
recommended.
(For example, when you search for Connected Calls, the time range
as “Today,” and sorting by N/A, CDR will retrieve the total number
of connected calls for “today.”
Note:
If the time range for the search is less than 1 day, and Date/Time is
selected for Sort by, CDR will list records hourly. If time range for
the search is longer than 1 day, and Date/Time is selected for Sort
by, CDR will list records daily.
6.
Click Search. During the search, a progress window appears.
7.
To cancel the search, click Cancel.
Search results appear in the Summary window. Refer to “Search
Results” on page 17 for details on working with search results.
Workgroup Statistics Search
Workgroup Statistics lets you search workgroup call data (rtmData.mdb
records) captured from the real-time monitoring function in the Workgroup
Statistics tab of the AltiSupervisor client. To perform this search, you can
log in as the administrator or as a workgroup supervisor
.
16 CDR Manual
Using CDR Search
To run a WG Statistics search:
Select the time range for the search:
• User Define—the From/To fields default to a range that includes
the 10 previous days. Edit the date and time for a custom range
• Today—sets the From/To fields to the current date
• Last 7 Days—sets the From/To range to the previous seven days
2.
Select the Interval (1 day, 1 hour, or 15 minutes) to specify the
granularity of your search results.
Note: This selection is overridden by the interval setting in AltiWare
Administrator. If your search results produce greater intervals
than you specified, consult your system administrator.
3.
Select the type of search:
• Workgroup Statistics—statistics on a specific workgroup
• Agent Statistics per Workgroup—statistics on a specific agent
for a specific workgroup
• Agent Statistics—statistics on a specific agent for every
workgroup to which the agent belongs
Note: See “CDR Search and Group CDR Search Results Windows”
on page 45 for workgroup statistics call data details.
4.
Depending on the type of search you selected, specify a Workgroup
and/or Agent to search on.
5.
Click Search. During the search, a progress window appears. To
cancel the search, click Cancel.
Search results appear in the Statistics window. Refer to “Search
Results” on page 17 for details on working with search results.
Search Results
The type of search you perform determines the type of results you see:
• Summary (which also enables drilldown to call Details and Records
windows)
• Statistics
All Results windows have the following buttons:
CDR Manual 17
Using CDR Search
1.
Search Results
•
Export—exports selected calls to a csv file. Refer to “Exporting
Records” on page 24 for details.
•
Print—prints the selected calls. Refer to “Printing Records” on page
24 for details.
All Statistics windows (WG, Agent Statistics Per WG, Agent) also have a
Stop button.
For explanations of records and database schema, see Chapter 5, Records
and Data Schema.
Summary (CDR Search and Group CDR Search)
For CDR Search and Group CDR Search, the Summary window displays
the results.
•
The Detail button opens the Detail window for a selected call. Refer to
“Call Details” on page 19 for details.
18 CDR Manual
Using CDR Search
Call Details
1.
To see details on a call,
select a record in the
Summary window and click
Detail.
The Detail window opens.
2.
To view call records, right-click a record in the Detail window and
select Show Call Info.
CDR Manual 19
Using CDR Search
You can drill down for detailed information on call records.
Search Results
Session ID Call Details
When searching by Session ID, the following window is displayed as
search results.
20 CDR Manual
Using CDR Search
Right-clicking on an entry opens a drop-down menu to Show Call Info or
Copy Session ID to Clipboard.
CDR Manual 21
Using CDR Search
For detailed information on this call record, select the record and click the
Detail button.
Search Results
Statistics (WG Statistics)
For Workgroup Statistics searches, the Statistics windows display the
results of your search. There are different windows for the three types of
WG Statistics searches you can perform.
Figure 1. The Workgroup Statistics window
22 CDR Manual
Using CDR Search
Using CDR Search
Figure 2. The Agent Statistics per Workgroup window
Figure 3. Agent Statistics window
CDR Manual 23
Exporting Records
Exporting Records
You can export records in csv format from the Statistics, Summary, Detail,
and Record windows.
To export records from the Statistics window:
1.
Click Export.
2.
Click OK to open the Save As dialog box.
To export records from the Summary, Detail, and Record windows:
1.
Do one of the following:
• To export specific records, select the records you want, then click
Export. In the Select window that appears, select Export only
selected records.
• To export all records, click Export. In the Select window that
appears, select Export All Records.
2.
Click OK to open the Save As dialog box.
Printing Records
You can print records from the Statistics, Summary, Detail, and Record
windows.
To export records from the Statistics window:
1.
Click Print.
2.
Click OK to open the Windows Print dialog box.
To print records from the Summary, Detail, and Record windows:
1.
Do one of the following:
• To print all records, click Print. In the Select window that appears,
select Print out all records.
• To print specific records, select the records you want, then click
Print. In the Select window that appears, select Print out only
selected records.
2.
Click OK to open the Windows Print dialog box.
24 CDR Manual
CHAPTER 3
CDR Overview
Real-Time Monitoring and the CDR Client
Workgroup call data is captured from the real-time monitoring function of
the AltiSupervisor client application and made available to a dedicated
feature—the “WG Statistics” tab—in the CDR Search client. The
difference between call detail recording (described immediately below)
and the RTM records is that call detail recording tracks every individual
call, from auto-attendant through disconnect, while RTM reporting takes
“snapshots” of call center data at continuous intervals ranging from every
15 minutes to every 24 hours.
Such data contains statistics—counts, sums, totals, averages, and
percentages—on items such as the number of calls in the workgroup’s
queue, the amount of time callers waited in the queue, and the number of
calls that were abandoned from the queue, during the searched time period.
This data is stored in its own database, which is configured for backups,
storage limits, and the granularity of your data (determined by the interval
size) via settings in AltiWare Administrator.
The RTM Statistics Database
The RTM statistics database, called "rtmData.mdb," is installed
automatically with AltiWare in a folder called "AltiDB," in any location the
user chooses
CDR Manual 25
CDR Overview
AltiGen’s Call Detail Recording (CDR) solutions include data creating,
recording, collecting, and reporting. While CDR can be used for individual
and departmental billing, timecards, and market analysis, this manual
places special emphasis on CDR’s use for call center applications. The data
schema are designed to provide information for PBX, call center, billing,
multi-project, and performance tracking information.
Real-Time Monitoring and the CDR Client
.
You can set up call reporting if AltiWare and AltiWare Administrator are
installed on the same server.
In AltiWare, call reporting distinguishes between call detail data, which
records every call made to, out of, and within the AltiServ system, and RTM
data, which is workgroup-related statistical data captured from the realtime monitoring function used in the AltiSupervisor client application.
Both types of data can be set up for call reporting, or logging, although their
storage systems are different.
• Call detail data can be logged to your local drive, to a remote server,
and/or exported via a COMM port.
• RTM data is always logged to your local drive.
Data logged to your local drive is stored in a directory called AltiDB, which
is located by default on the root of the drive where AltiWare is installed.
Files are stored in .mdb format.
Backups, if you choose to make them, are created in a subdirectory called
DBBackup, which in turn contains three subdirectories: MCDR for
Advanced Call Data, RTMCALL for Call Data, and RTMDATA for
RTM data. These three types of data have separate report screens in the
CDR Search client, and are described in the CDR documentation.
26 CDR Manual
CDR Overview
To set up and use call reports, in AltiWare Administrator select System >
System Configuration, then click the Call Reports tab.
.
CDR Overview
When RTM Data - MDB is selected, the Config button opens a dialog box
where the user can enable and configure these records.
Internal Database Configuration (Internal Logger
Service)
To set up and enable CDR collection to the local drive, click the Add
button. A dialog box appears
CDR Manual 27
Real-Time Monitoring and the CDR Client
.
Add a Name and IP Address for the Internal Log Service, then click OK.
In the Internal Database Configuration section, select the Active
database retaining period in months. Check the Archive purged
record(s) field and select the number of months per archive file if you wish
to archive purged Internal Logger Service records.
External (Remote) Logging of Call Data
AltiWare allows you to output call accounting to a Microsoft SQL 2000
database.
The database cannot be on the same server as the AltiWare system. A
system integrator or database developer will need to write a custom query
to extract data from the SQL database.
You can send reports from a number of different AltiServ systems to the
same database.
Note:
Before you enable external logging using this window, you need to
set up and configure the database. It should be ready to receive the
reports before you enable the export here.
Note:
AltiGen does not provide any SQL backup and restore utility. We
strongly recommend that you use SQL Backup and Maintenance
utility to perform daily backup and maintenance jobs, and use a
restore utility to restore the database. If you need to reconstruct the
SQL server, run the External Logger Setup to create an empty
calldb database before restore.
28 CDR Manual
CDR Overview
To set up and enable RTM data collection to the local drive, click the Add
button. A dialog box appears
.
CDR Overview
Add a Name and IP Address for the External Log Service, then click OK.
Call Center Events and CDR
In call detail recording, every individual call is tracked from its start time
to its end time. An incoming trunk call, for instance, starts with autoattendant answer. The auto attendant/IVR offers the caller specific routing
choices, and/or collects information to intelligently route a call. Queuing,
if it happens, starts with the call leaving the auto attendant/IVR, includes
ring time of the agent phone, and ends when an agent answers the phone.
Disconnects (call abandons) can happen at any time during the process. All
of this activity is summarized under talk time and wrap-up time. It is
searchable via the “CDR” and “WG CDR” tabs of the CDR Search client.
Past and Present CDR
Database Schema. The CDR data schema has been redesigned and
streamlined. If you have a reporting package using past versions of
AltiGen’s CDR or SMDR, the reporting package vendor will have to
rewrite the reporting program to work with the new schema.
Rate Tables. AltiWare 4.0 and higher does not support rate tables,
unlike previous releases. This function must now be obtained by external
applications found in reporting tools. The CDR database has sufficient
information to support rate and charge evaluation by external applications.
CDR Manual 29
Configuration Areas Affecting CDR Information
Migration. If you are upgrading from OE 4.5 or earlier, you will not be
provided with any conversion tool for CDR records stored under OE 4.5 or
prior releases.
Extension-to-Extension Call Reporting. CDR Search includes
records for internal calls between extensions, and from internal extensions
to workgroups. This is in addition to information on incoming and outgoing
trunk calls.
SMDR Cautions. SMDR is a Mitel-defined data schema for delivering
basic call information out the RS232 serial port to external recording and
reporting applications. While AltiGen has provided an SMDR interface, it
has had many problems in terms of accuracy and consistency of
information delivery. SMDR is not CDR. CDR is historical, and is a
database containing call records. SMDR is a real time delivery of a subset
of this information. We recommend that you use the new CDR, not the
SMDR, for reporting and billing applications. No improvements or
corrections have been made to SMDR.
Configuration Areas Affecting CDR Information
Routing and Route Name
How calls are routed in outcall routing is reflected in the CDR record. The
route names configured in AltiWare Administrator will appear in the route
table name area of the records.
Multi-Project Naming
Each extension table entry in AltiWare Administrator has a field to identify
the extension owner. If a name is placed in this field, that name will be used
in the CDR record to represent the project or department associated with
the particular extension.
30 CDR Manual
CDR Overview
Wrapup
Ring No Answer Configurations and VM
Agents sign on to workgroups and answer calls. On occasion, an agent
might be signed on but walk away from their station. Under these
conditions, AltiWare Administrator allows the administrator to define what
AltiWare should do if it encounters a Ring No Answer condition on a
phone.
For example, the call can be sent to voice mail, to another agent, back to
queue, or to auto attendant/IVR. How this configuration is set up
determines the types of CDR records that will be recorded for this
condition. Since AltiWare tracks all incoming calls from a trunk to an
extension, this also applies to calls routed to regular extensions, not just
workgroups.
Login and Log-out
The CDR records database also supports a special record type. This record
type records when agents login and log-out from a workgroup. The
information tells only when the action has taken place and which agent
logged in and out. Therefore, a reporting program should always check to
see if the record it is using or examining is for logon/log-out or for tracking
the nature of a call. An agent logon/log-out record should have the agent’s
extension number and PAD information.
Conference Call Limitation
When an extension initiates a conference call with another extension, this
“Conference” state between extensions is NOT logged in the CDR or RTM
database.
CDR Manual 31
CDR Overview
Setting the wrapup time or supporting AltiX ActiveX controls can affect
the level of CDR information. For example, using ActiveX for
AltiLinkPlus, a client application can place wrapup data into the User
Defined data field of the CDR record. This is useful if the user wants to
correlate business information with call handling information; revenue
achieved versus talktime by agent. A system integrator is required to use
AltiGen’s AltiX ActiveX control.
Configuration Areas Affecting CDR Information
Changing Time Settings
If an administrator changes the time setting in Windows, it will affect
active calls’ CDR records. It may cause large, negative or zero talk time in
CDR records.
32 CDR Manual
CHAPTER 4
Data Storage
AltiWare can store data using either an Internal Logger Service (ILS) or up
to two External Logger Service (ELS). CDR Search can use either ILS or
CDR to search stored data.
Call detail record data (CDR) and workgroup-related statistical data (RTM)
are stored in the same database but in different tables. These two storage
systems are described below.
Common Features of ILS and ELS
• Broken and reconnection mechanism implemented on:
— TCP connection between AltiWare/ACM and Logger Service
— database connection between Logger Service and database.
When the connection is broken, the sender will cache all data to the
first-in-first-out buffer. The sender will try to reconnect the receiver
automatically. Once the connection is back, all data will be sent. The
buffer is stored in memory and hard disk. The size limitation of each
buffer is 1G (data for approximately two months), or free size of hard
drive is less than 512 MB, whatever is met first. When the buffer is
overflowed, the earliest data is dropped.
• Auto check and upgrade database at startup—when Logger Service
starts, it performs the following:
1. Compares CDR structure with the current database used by
configuration.
2. If they are the same, there is no change.
3. If they are different, and the data can be upgraded, it will be
automatically upgraded.
4. If the database cannot be upgraded, it will rename the old database
and create a new database; the new database will then be used to
store data.
CDR Manual 33
Data Storage
• Status can be monitored in AltiWare Administrator through the bottom
of the Main Window or through the Call Report window (System >
Call Report)
Differences between ILS and ELS
• Status monitoring of connection between AltiWare/ACM and Logger
Service—User Database ID and Client ID can be used to verify
connection to Logger Service. “Database ID” is fixed to “Default” and
cannot be found on any GUI. “Client ID” is mentioned as “Password”
in AltiWare Administrator and External Logger Service
Configuration. If the verification fails, the status of the Logger Service
is “Invalid Password,” which can be monitored by the administrator.
• If no database is set up correctly, or the database is shut down when
Logger Service is starting, it will be stopped.
Differences between ILS and ELS
Internal Logger Service
• Implements auto retain and backup mechanism (1-12 months)
• Only AltiWare/AltiWare Administrator within the same computer can
connect to the Internal Logger Service.
External Logger Service
• Supports Microsoft SQL 2000
• No retain/backup mechanism
• Any computer can connect to the server (TCP port 10027)
• Any number of AltiWare systems with different System IDs can
connect to the same Logger Service. If two AltiWare systems with the
same System ID try to connect to the same Logger Service, the second
Logger Service will get a “System ID conflicted” error.
• When ELS is installed within Microsoft SQL 2000, the installation
program will create the database, ODBC configuration, and other
configuration by default. If it is installed to work with remote SQL
2000, the customer must manually configure the Logger Service first.
Logger Service Configuration
AltiWare Administrator can configure CDRLogDLL, add (register) and
remove New Logger Server for AltiWare remotely, but they cannot
configure Logger Server.
34 CDR Manual
Data Storage
In order to implement remote manager ability, a Log Service configuration
window can be accessed in AltiWare Administrator.
External Logger Server Configuration Tool
The External Logger Configuration Tool is used to configure Logger
Server. Currently, all configurations are saved into registry, so any change
in configuration will not work unless Logger Service is restarted. When the
configuration is changed, the Configuration Tool will automatically restart
Logger Service.
Note:
There is no configuration tool for Internal Logger Server because
all parameters are fixed.
CDR Manual 35
Data Storage
Use the Log Service Configuration window to Add, Edit and/or Remove
a Log Service.
External Logger Server Configuration Tool
Configuration GUI for External Logger Server
For ELS, only Database ID, Password, ODBC Source Name, Login ID
and Password are configurable. Other parameters, such as TCP port and
buffer folder, cannot be changed. If the database is a Microsoft Access
Database, ELS can purge and back up the database on demand.
Testing the DB Dialog
The Test button is used for testing and diagnosing the ODBC database. It
can test whether the ODBC source, Login ID and password are correct and
that the CDR/RTM tables of the database are compatible with the current
Logger Server.
Important:
It is strongly recommended that you run this test after you
have changed any database parameters.
If the configuration tool cannot connect to the ODBC source, it will pop up
the following dialog boxes to report error information and to re-input login
information.
36 CDR Manual
Data Storage
Limitations
• One Internal Logger Server per computer.
• One External Logger Server per computer.
• One Super Logger Server per computer.
• One Internal, External and Super Logger Server can be installed in the
same computer.
CDR Manual 37
Data Storage
When the ODBC information is correct, the tool will check all tables
required and will try to find all differences. If the database in not
compatible, the OK button will be disabled.
External Logger Server Configuration Tool
• One AltiWare can only output data to, at most, one Internal Logger
Server and two External Logger Servers.
• Internal Logger Server only serves AltiWare of same computer.
• Internal Logger Server only supports Microsoft Access Database.
• Internal and External Logger Server do not support multiple databases.
• One Database Connection license is required for every Logger Server
and every CDR Search requires one additional license.
• External Logger Configuration tools cannot run remotely.
• 100 commands per second on every TCP or database connection.
• Maximum 1 G buffer files for every buffer; otherwise; always keep
500 MB free hard drive space. (When free space is below 500 MB, the
buffer files will be truncated automatically.)
38 CDR Manual
CHAPTER 4
CDR and Workgroup CDR Search
— Typical Searches
This section contains examples of how to run various CDR and Workgroup
CDR searches that are typically used by call centers. Identify the type of
search you would like to perform, go to the CDR Search main window,
define the search date, set the fields and settings as directed, then click the
Search button to run the search.
Note:
Connected Calls include Connected Calls, Transferred Calls and
Conference Calls.
All includes Auto Attendant/IVR, Ring No Answer, Queue, Voice
Mail (no VM recorded or VM recorded), Connect, Logon, Logoff,
All Trunks Busy, No session, VM Access, Forward, Transfer, VM
Notify, WG Abandoned, Park, System Park, Conference, Call
Monitor, Transfer Cancel, Call Redirect, Call Pick Up, Dial Cancel.
Unanswered Calls include calls abandoned while in these states:
AA, Forward, RNA, Queue, Voicemail, WG abandoned, Call
Redirect, No More Session, Pick Up By and Dial Cancel.
Example CDR Searches
To run a search on:
All outgoing trunk calls, systemwide
Use these fields and settings:
Set Type to Connected Calls
Set Caller to All
Set Callee to Trunk
All incoming trunk calls,
system-wide
Set Type to Connected Calls
Set Caller to Trunk
CDR Manual 39
Sample CDR
Searches
Set Callee to Extension, enter
particular extension, select Exact
Example CDR Searches
To run a search on:
All outgoing trunk calls for a
particular extension
Use these fields and settings:
Set Type to Connected Calls
Set Caller to Extension, enter
particular extension, select Exact
Set Callee to Trunk
All connected incoming trunk
calls for a particular extension
Set Type to Connected Calls
Set Caller to Trunk
Set Callee to Extension, enter
particular extension, select Exact
All internal and external calls
from a particular extension
Set Type to Connected Calls
Set Caller to Extension, enter the
particular extension, select Exact
Set Callee to All
All incoming (trunk to extension
and trunk to trunk) calls
(system-wide) originated by
extensions
All internal and external
connected calls (system-wide)
Set Type to Connected Calls
Set Caller to Trunk
Set Callee to All
Set Type to Connected Calls
Set Caller to Extension
Set Callee to All
All incoming calls to a particular
extension from trunk
Set Type to All
Set Caller to Trunk
Set Callee to Extension
All internal calls
Set Type to Connected Calls
Set Caller to Extension
Set Callee to Extension
40 CDR Manual
CDR and Workgroup CDR Search — Typical Searches
Example CDR Searches
To run a search on:
All internal calls to/from a
particular extension
Use these fields and settings:
Set Type to Connected Calls
Set Caller to Extension, enter
particular extension, select Exact
Set Callee to Extension, enter
particular extension, select Exact
All trunks busy
Set Type to All Trunks Busy
Set Caller to All
Set Callee to All
Example Workgroup CDR Searches
To run a search on:
All incoming workgroup calls
per agent
Use these fields and settings:
Set Type to Connected Calls
Enter Workgroup Number, select
Inbound
Set Sort By to Agent
All incoming workgroup calls
per workgroup
Set Type to Connected Calls
Enter Workgroup Number, select
Inbound
Set Sort By to N/A
All unanswered calls by
workgroup
Set Type to Unanswered Calls
Enter Workgroup Number, select Both
CDR Manual 41
Sample CDR
Searches
Set Sort By to N/A or Date/Time
Example Call Sequences and their Effect on CDR Records
Example Workgroup CDR Searches
To run a search on:
All workgroup voicemail
messages by workgroup
Use these fields and settings:
Set Type to Messages
Enter Workgroup Number, select Both
Set Sort By to Workgroup
All calls to workgroup
Set Type to All Calls
Enter Workgroup Number, select Both
Set Sort By to N/A or Date/Time
All calls to workgroup via
specific DNIS
Set Type to All Calls
Enter Workgroup Number, select Both
Enter DNIS digits, select Exact
Set Sort By to Workgroup
All trunks busy for workgroup
trunks (for outbound calls)
Set Type to All Trunks Busy
Enter Workgroup Number, select
Outbound
Set Sort By to N/A
All Unanswered Calls by Agent
Set Type to Unanswered
Enter Workgroup Number, select Both
Set Sort By to Agent
Example Call Sequences and their Effect on
CDR Records
One objective of the CDR record is to track the talk time of agents and
individuals for incoming and outgoing calls. Many call sequences are
possible. The following are examples of inbound and outbound calls to a
call center and sequences of recorded results in the CDR Detail report:
Example 1—Ext. 102 calls Operator, Operator transfers Ext. 102 to Ext.
309, Ext. is connect to Ext. 309. The result is three sessions logged for this
event.
42 CDR Manual
CDR and Workgroup CDR Search — Typical Searches
Figure 1. CDR record sessions for Example 1
Example 2—External party calls and connects directly to Ext. 105. The
result is one sessions logged for this event.
Figure 2. CDR record sessions for Example 2
CDR Manual 43
Sample CDR
Searches
Example 3—External party calls office and gets Automated Attendant,
then dials out Operator. The result is two sessions logged for this event.
Example Call Sequences and their Effect on CDR Records
Figure 3. CDR record sessions for Example 3
44 CDR Manual
CHAPTER 5
Records and Data Schema
This section contains explanations of the CDR search results records,
including the data schema.
Important!
In order to reduce the storage space of the database, records with all zero
files are not written to the database.
Search Results
This section explains the fields in all the CDR Search results windows.
CDR Search and Group CDR Search Results Windows
Summary Window
Shown in “Summary (CDR Search and Group CDR Search)” on page 18
Field
Definition
Number assigned by CDR Search to this record
Time/Extension/
Workgroup/
Trunk/Date
Start time for this record, if sorting by Time; Extension for this
record, if sorting by Extension; Workgroup for this record, if
sorting by Workgroup; Trunk for this record, if sorting by
Trunk; Date for this record, if sorting by Date.
Total Records
Total CDR records of the type searched for.
Note:
Total Duration
Please note that one call may have multiple CDR
records logged. Therefore, the number of records may
not match with the number of calls in WG Statistics
screens.
Sum of duration of the calls in the records, where duration lasts
from Start Time to End Time (see “Record Window for “Call
Info”” on page 47 for explanations of these fields)
CDR Manual 45
Records and
Data Schema
ID
Search Results
Detail Window
Shown in “Call Details” on page 19
Field
Definition
ID
Number assigned by CDR Search to this record
Session ID
Unique number assigned by AltiWare to this call
Sequence ID
Unique number to identify multiple records of same call (same
session ID), beginning with 0.
Conference ID
Unique number to identify multiple conference calls.
Date
Date of call
Time
Start time of call
Duration
Duration of call (EndTime minus StartTime; see Table 9,
“CDRMAIN,” on page 66 for explanations of these schema)
Wait Time
RingDuration plus QueueDuration (see Table 9,
“CDRMAIN,” on page 66 for explanations of these schema)
Talk Time
TalkDuration (see Table 9, “CDRMAIN,” on page 66 for
explanations of these schema)
Others Time
AADuration plus HoldDuration plus VMDuration
Message Duration
VMRecDuration
Exit state
The last state of call before the call record is logged. (see
Table 9, “CDRMAIN,” on page 66 for details)
Caller ID
Caller phone number of a call
Caller Name
Caller name for a call
Target ID
Target number for a call
Target Name
Target name for a call
46 CDR Manual
Records and Data Schema
Detail Window
Shown in “Call Details” on page 19
Field
Definition
DNIS
DNIS information for an incoming call
Acct Code
Account code
URL
URL when “call” is initiated by AltiWeb user clicking the
make-call button
User Data
Agent input
Record Window for “Call Info”
Shown in “Call Details” on page 19
Node ID
Server ID (System ID) assigned to an AltiWare system in
AltiWare Administrator
Session ID
Session ID: a unique number, usually 9 digits or larger,
assigned by AltiWare to a call
Internal Call
Internal or external call
Direction
Direction of the call (incoming or outgoing)
Start Time
Outgoing call: Date and time when caller receives ringback,
busy, or connect signal
End Time
Date and time when call exits this stage or disconnects
Duration
Duration of call (End Time minus Start Time)
Caller Type
Caller line type (see Table 9, “CDRMAIN,” on page 66 for
details)
Caller PAD
Line’s physical address for a call
CDR Manual 47
Records and
Data Schema
Incoming call: Date and time when system responds to the call.
Search Results
Record Window for “Call Info”
Shown in “Call Details” on page 19
Caller ID
Caller number for a call
Caller Name
Caller name for a call
Target Type
Call target line type (see Table 9, “CDRMAIN,” on page 66 for
details)
Target PAD
Physical address of line for a call target
Target ID
Number for a call target
Target Name
Name for a call target
Workgroup
Number
Target workgroup number for an incoming call
Outgoing
Workgroup
Workgroup number for an outgoing call, as set in AltiWare
Administrator or by agent at logon
DNIS
DNIS number for incoming call
Project
Project number for trunk, as set in AltiWare Administrator
Account Code
Account code
Attendant
Duration
Duration while call is in Auto Attendant/IVR state
Ring Duration
Duration while call is in ringing state.
Queue Duration
Duration while the incoming call is in queue (workgroup or
direct call)
VM Duration
Duration after a call goes into voicemail box; includes greeting,
false attempts at messages, and review of message, and
includes VM Record Duration
VM Record
Duration
Duration of recording time for a VM message that was
completed; in AltiView, this corresponds to Length field of a
voicemail.
48 CDR Manual
Records and Data Schema
Record Window for “Call Info”
Shown in “Call Details” on page 19
Hold Duration
Duration while call was on hold or parked
Talk Duration
Duration while the call is answered by a person; see Table 9,
“CDRMAIN,” on page 66 for details)
Record Duration
Duration of conversation recording
Exit State
The last state of call before the call record is logged; (see
Table 9, “CDRMAIN,” on page 66 for details)
URL
URL when “call” is initiated by AltiWeb user clicking the
make-call button
User Data
Agent input
WG Statistics Search Results Windows
Agent Statistics Window
Shown in “Statistics (WG Statistics)” on page 22
Field
Definition
Upper half of window
Number assigned by AltiWare to this record
Date
Date of time interval
Time
Time interval for these call statistics
In Call Ans
Count of incoming workgroup calls that were answered
by an agent; if a login agent uses Pick Call from Queue
feature in AltiAgent, this counter is also incremented. If
the incoming workgroup call is answered by an agent,
then transferred or parked, the transferred or parked call
is considered out of this workgroup.
CDR Manual 49
Records and
Data Schema
ID
Search Results
Agent Statistics Window
Shown in “Statistics (WG Statistics)” on page 22
Field
Definition
In Talk Time
Sum of talk duration of incoming answered workgroup
calls. Talk duration lasts from the time an agent answers
the call until the time the call is disconnected, parked or
transferred. (Hold time is not included in talk time.)
Out Call Ans
Count of connected outbound workgroup calls. (Agent
needs to login to outbound workgroup)
Out Talk Time
Sum of talk duration of connected outbound workgroup
calls. Talk duration lasts from the time the call is
connected until the time the call is disconnected, parked
or transferred. (Hold time is not included in talk time.)
Lower half of window (Totals, Averages, and Percentages)
Total Inbound Calls
Answered
Total of In Calls Ans
Total Talk Time
Total duration of In Talk Time.
Average Talk Time
Total Talk Time divided by Total Inbound Calls
Answered
Total Connected
Outbound Calls
Total of Out Call Ans
Total Talk Time
Total duration of Out Talk Time.
Average Talk Time
Total Talk Time divided by Total Connected
Outbound Calls
Total Number of
Wrap-Up
Total number of Wrap-ups for both incoming and
outgoing workgroup calls.
50 CDR Manual
Records and Data Schema
Agent Statistics Window
Shown in “Statistics (WG Statistics)” on page 22
Field
Definition
Total Wrap-up Time
Total of Wrap-up duration (time while agent is in wrapup state) for both incoming and outgoing calls..
Average Wrap-up
Time
Total Wrap-up Time divided by Total Number of
Wrap-up.
Agent Statistics per Workgroup Window
Shown in “Statistics (WG Statistics)” on page 22
Field
Definition
Upper half of window
Number assigned by CDR Search to this record
Date
Date of time interval
Time
Time interval for these call statistics
In Call Ans
Count of incoming workgroup calls that were answered
by an agent; if a login agent uses Pick Call from Queue
feature in AltiAgent, this counter is also incremented. If
the incoming workgroup call is answered by an agent,
then transferred or parked, the transferred or parked call
is considered out of this workgroup.
In Talk Time
Sum of talk duration of incoming answered workgroup
calls. Talk duration lasts from the time an agent answers
the call until the time the call is disconnected, parked or
transferred. (Hold time is not included in talk time.)
Out Call Ans
Count of connected outbound workgroup calls. (Agent
needs to log in to outbound workgroup)
CDR Manual 51
Records and
Data Schema
ID
Search Results
Agent Statistics per Workgroup Window
Shown in “Statistics (WG Statistics)” on page 22
Field
Definition
Out Talk Time
Sum of talk duration of connected outbound workgroup
calls. Talk duration lasts from the time the call is
connected until the time the call is disconnected, parked
or transferred. (Hold time is not included in talk time.)
Login Time
Date and time agent last logged into this WG within or
before specified time interval
Logout Time
Date and time agent last logged out of this WG within
or before specified time interval
Logout Reason
Logout Reason code
Lower half of window (Totals, Averages and Percentages)
Total Logged In Time
Total of agent login duration to this workgroup
Total Inbound Calls
Answered
Total of In Calls Ans
Total Talk Time
Total of In Talk Time
Average Talk Time
Total Talk Time divided by Total Inbound Calls
Answered
Total Connected
Outbound Calls
Total of Out Calls Ans
Total Talk Time
Total of Out Talk Time
Average Talk Time
Total Talk Time divided by Total Connected
Outbound Calls
Total Number of Wrapups
Total number of Wrap-ups for both incoming and
outgoing workgroup calls.
52 CDR Manual
Records and Data Schema
Agent Statistics per Workgroup Window
Shown in “Statistics (WG Statistics)” on page 22
Field
Definition
Total Wrap-up Time
Total of wrap-up duration (time while agent is in wrapup state) for both incoming and outgoing calls.
Average Wrap-up
Time
Total Wrap-up Time divided by Total Number of
Wrap-up.
Workgroup Statistics Window
Shown in “Statistics (WG Statistics)” on page 22
Field
Definition
Upper half of window
Number assigned by CDR Search to this record
Date
Date of the time interval
Time
Time interval for these call statistics
Incoming Calls
Incoming workgroup calls
Calls in Queue
Count of calls in workgroup queue while all agents are
not available; when agent RNA and “No Answer Call
Handling” is set to Forward to Next Group Member,
this call is re-queued but will not be counted twice.
Calls Answered
Count of workgroup calls that were answered by
agents; if a login agent uses Pick Call from Queue
feature in AltiAgent, this counter is also incremented. If
the incoming workgroup call is answered by an agent,
then transferred or parked, the transferred or parked call
is considered out of this workgroup.
CDR Manual 53
Records and
Data Schema
ID
Search Results
Workgroup Statistics Window
Shown in “Statistics (WG Statistics)” on page 22
Field
Definition
Calls Answered Duration
Sum of talk duration of incoming answered workgroup
calls. Talk duration lasts from the time an agent answers
the call until the time the call is disconnected, parked or
transferred. (Hold time is not included in talk time.)
Outgoing Calls
Count of outgoing connected workgroup calls. (Agent
needs to log into this workgroup)
Outgoing Calls Duration
Sum of talk duration of connected outbound workgroup
calls. Talk duration lasts from the time the call is
connected until the time the call is disconnected, parked
or transferred. (Hold time is not included in talk time.)
Calls Abandoned to VM
with Msg
Count of calls abandoned to VM (by caller pressing a
digit or by system automatically redirecting caller to
VM where caller leaves a message
Calls Abandoned in
Queue
Count of caller hang up while in queue listening to
music or queue greeting
Calls Abandoned during
Ring
Count of caller hang up while ringing a workgroup
agent
Calls Abandoned to VM
without Msg
Count of calls abandoned to VM (by caller pressing a
digit or by system automatically redirecting caller to
VM where the caller did not leave a message
Overflowed/Redirected
Count of calls that overflowed from the workgroup
queue or redirected to other destinations;
Wait Time for Answered
Calls
Sum of wait time (queue duration + ring duration) for
Calls Answered
Wait Time for
Abandoned Calls
Sum of wait time (queue duration + ring duration) of all
abandoned calls
Lower half of window (Totals, Averages, and Percentages)
54 CDR Manual
Records and Data Schema
Workgroup Statistics Window
Shown in “Statistics (WG Statistics)” on page 22
Field
Definition
Group Inbound Calls Summary
Group Total Inbound
Calls
Total of all inbound calls, including Answered,
Overflowed, and all Abandoned calls
Total Calls Without
Queueing
Total of calls with queue duration of zero.
Total Calls in Queue
Total of Calls in Queue
Total Calls Answered
Total of Calls Answered
Total Calls
Overflowed
Total of Overflowed/Redirected
Total Calls
Abandoned
Total of Calls Abandoned which is the sum of
Abandoned in Queue, Abandoned During Ring,
Abandoned to Voice Mail, and Abandoned to Others
in the following sub-categories.
Total of Calls Abandoned in Queue
Abandoned during
Ring
Total of Calls Abandoned during Ring
Abandoned to
Voice Mail
Total of calls abandoned to voice mail, which is the sum
of Leave VM and Without VM in the following subcategory.
Leave VM
Total of Calls Transferred to VM
CDR Manual 55
Records and
Data Schema
Abandoned in
Queue
Search Results
Workgroup Statistics Window
Shown in “Statistics (WG Statistics)” on page 22
Field
Without VM
Abandoned to App
or Others
Definition
Total of Calls Abandoned during VM
Total of calls redirected to a target other than VM, when
caller in queue presses a digit. Abandoned to
application is also included.
Historical Service Level
Total Calls Answered
Within SL
Total of Calls Answered with Queue Duration less
than or equal to the Service Level Threshold configured
in Workgroup Configuration window of AltiWare/
ACM Administrator
Total Inbound Talk Time
Total of Calls Answered Duration
Average Inbound Talk
Time
Total Inbound Talk Time divided by Total Calls
Answered
Average Wait Time for
Answered Calls
Total Wait Time for Answered Calls divided by
Total Calls Answered
Average Wait Time for
Overflowed Calls
Total Wait Time (Queue Duration + Ring Duration)
for Overflowed Calls divided by Total Calls
Overflowed
Average Wait Time for
Abandoned Calls
Total Wait Time (Queue Duration + Ring Duration)
for Abandoned Calls divided by Total Calls
Abandoned
Total Wait Time for
Answered Calls
Total of Wait Time (Queue Duration + Ring Duration)
for Answered Calls
Total Wait Time for
Overflowed Calls
Total Wait Time (Queue Duration + Ring Duration) for
overflowed calls
56 CDR Manual
Records and Data Schema
Workgroup Statistics Window
Shown in “Statistics (WG Statistics)” on page 22
Field
Definition
Total Wait Time for
Abandoned Calls
Total of Wait Time (Queue Duration + Ring Duration)
for Abandoned Calls
Total Outbound
Connected Calls
Total of Outgoing Calls
Total Outbound Talk
Time
Total of Outgoing Calls Duration
Average Outbound Talk
Time
Total Outbound Talk Time divided by Total
Outbound Connected Calls
Records and
Data Schema
CDR Manual 57
Search Results
Data Schema
This section describes the data schema used in CDR and RTM records.
Table 1:AGENTACTIVITY
Database
Element
Definition
Type
Specification
Version
Version of the
record
LONG
2 = OE/ACM 5.0A
NodeID
Server ID (System
ID) assigned to an
AltiWare system in
AltiWare
Administrator
LONG
value: 1–100
Time_Stamp
GMT time when
activity occurs.
Seconds since 1970/
01/01 00:00:00.
LONG
GMTOffset
Offset to GMT time,
includes daytime
savings, in seconds;
ex: Pacific Summer
time 25200
LONG
LocalDay
8 digit number
representing date
LONG
Format: yyyymmdd
LONG
0 = Sunday
ex: 20040608 = 06/
08/2004
DayOfWeek
Day of the week
1 = Monday
2 = Tuesday
3 = Wednesday
4 = Thursday
5 = Friday
6 = Saturday
AgentNum
Agent Extension
Number
LONG
WGNum
Workgroup Number
LONG
58 CDR Manual
Records and Data Schema
Database
Element
Definition
Type
Specification
Activity
Activity of the
Agent
LONG
1 = Staff
2 = UnStaff
3 = Login
4 = Logout
5 = Ready
6 = DNDFWD
7 = Not Ready
8 = Wrapup
9 = Error
Reason
Reason for Activity.
(For logout, it is
logout reason code)
LONG
96 = Network issues caused the
system to log out an IP phone
agent from the workgroup.
97 = Agent’s physical or IP
extension is changed to virtual
extension. System logs out the
extension from workgroup.
98 = Supervisor logs out the agent.
99 = Agent ring no answer.
System logs out the agent from
workgroup based on configuration
WrapUpSess
ionID
Call session, for
wrap up
LONG
WrapUpDir
ection
Call direction, for
wrap up
LONG
When Activity = 8 (Wrapup),
1 = inbound wrap-up
2 = outbound wrap-up
WrapUpDur
ation
Wrap up duration
LONG
Agent per Workgroup Statistics during the time interval specified by Start
Time and End Time.
Database
Element
Definition
Type
Specification
Version
Version of the record
LONG
2 = OE/ACM
5.0A
CDR Manual 59
Records and
Data Schema
Table 2:AGENTPERWGSUMMARY1
Search Results
Database
Element
Definition
Type
Specification
NodeID
Server ID (System ID) assigned to an
AltiWare system in AltiWare
Administrator
LONG
value: 1–100
StartTime
GMT start time of record's period.
Seconds since 1970/01/01 00:00:00.
LONG
EndTime
GMT end time of record's period.
Seconds since GMT 1970/01/01
00:00:00.
LONG
GMTOffset
Offset to GMT time, includes
daytime savings, in seconds; ex:
Pacific Summer time 25200
LONG
LocalDay
8 digit number representing date
LONG
Format:
yyyymmdd
LONG
0 = Sunday
ex: 20040608 = 06/08/2004
DayOfWeek
Day of the week
1 = Monday
2 = Tuesday
3 = Wednesday
4 = Thursday
5 = Friday
6 = Saturday
AgentNum
Agent Extension Number
LONG
WGNum
Workgroup Number
LONG
uid
Unique ID to link to
AGENTPERWGSUMMARY2 and
AGENTPERWGSUMMARY3
LONG
Table 3:AGENTPERWGSUMMARY2
Database
Element
Definition
Type
Specification
Version
Version of the record
LONG
2 = OE/ACM
5.0A
NodeID
Server ID (System ID) assigned to an
AltiWare system in AltiWare
Administrator
LONG
value: 1–100
60 CDR Manual
Records and Data Schema
Definition
Type
uid
Unique ID to link to
AGENTPERWGSUMMARY1
LONG
NumInWGC
all
Total inbound WG calls during
interval
LONG
NumInWGA
nswered
Number of incoming workgroup
calls answered by this agent
LONG
NumInWGR
NA
Total of agent RNA
LONG
DurInWGAn
sRing
Ring duration of answered calls
workgroup calls
LONG
DurInWGTal
k
Talk duration of incoming calls
(NumInWGAnswered), starting from
the time the agent answers a call until
the call is disconnected, transferred,
or parked
LONG
NumInWGW
rapUp
Number of Wrap-ups for incoming
calls
LONG
DurInWGWr
apUp
Wrap-up duration for incoming calls
LONG
NumInWGV
M
Count of WG calls to agent's VM
with message
LONG
DurInWGV
M
Total duration of voicemail message
LONG
NumInWGH
old
Number of incoming calls hold by
agent (One call hold multiple times
count once only)
LONG
DurInWGHo
ld
Hold duration of incoming calls
LONG
NumOutWG
Connected
Count of outgoing connected calls
including trunk and extension calls
LONG
DurOutWGT
alk
Talk duration of outgoing connected
calls (NumOutWGConnected) from
the time the call enters "Connected"
state until disconnected, parked or
transferred
LONG
NumOutWG
WrapUp
Number of wrap-ups for outbound
WG calls
LONG
Specification
Records and
Data Schema
Database
Element
CDR Manual 61
Search Results
Database
Element
Definition
Type
DurOutWG
WrapUp
Wrap-up duration for outbound WG
calls
LONG
NumOutWG
Hold
Count of outbound WG hold calls by
agent (One call on hold multiple
times will count once only)
LONG
DurOutWG
Hold
Hold duration of outbound
workgroup calls
LONG
Specification
Table 4:AGENTPERWGSUMMARY3
Database
Element
Definition
Type
Specification
Version
Version of the record
LONG
2 = OE/ACM
5.0A
NodeID
Server ID (System ID) assigned to an
AltiWare system in AltiWare
Administrator
LONG
value: 1–100
uid
Unique ID to link to
AGENTPERWGSUMMARY1
LONG
DurLogin
The total time agent was logged in.
LONG
Table 5:AGENTSUMMARY1
Database
Element
Definition
Type
Specification
Version
Version of the record
LONG
2 = OE/ACM
5.0A
NodeID
Server ID (System ID) assigned to an
AltiWare system in AltiWare
Administrator
LONG
value: 1–100
uid
Unique ID to link to
AGENTSUMMARY2,
AGENTSUMMARY3, and
AGENTSUMMARY4
LONG
StartTime
GMT start time of record's period.
Seconds since 1970/01/01 00:00:00.
LONG
62 CDR Manual
Records and Data Schema
Database
Element
Definition
Type
EndTime
GMT end time of record's period.
Seconds since GMT 1970/01/01
00:00:00.
LONG
GMTOffset
Offset to GMT time, includes
daytime savings, in seconds; ex:
Pacific Summer time 25200
LONG
LocalDay
8 digit number representing date
LONG
Format:
yyyymmdd
LONG
0 = Sunday
ex: 20040608 = 06/08/2004
DayofWeek
Day of the week
Specification
1 = Monday
2 = Tuesday
3 = Wednesday
4 = Thursday
5 = Friday
6 = Saturday
AgentNum
Agent Extension Number
LONG
Table 6:AGENTSUMMARY2
Database
Element
Definition
Type
Specification
The following values are significant only when an agent logs into at least one workgroup.
If an agent doesn’t log into any workgroup, all values should be zero.
Version of the record
LONG
2 = OE/ACM
5.0A
NodeID
Server ID (System ID) assigned to
an AltiWare system in AltiWare
Administrator
LONG
value: 1–100
uid
Unique ID to link to
AGENTSUMMARY1
LONG
NumInDirCall
Direct (non-workgroup) incoming
call
LONG
NumInDirAnsw
ered
Direct (non-workgroup) incoming
call answered
LONG
DurInDirTalk
Total talk duration of direct (nonworkgroup) incoming calls
LONG
Records and
Data Schema
Version
CDR Manual 63
Search Results
Database
Element
Definition
Type
NumInDirVM
Count of direct inbound voicemail
message
LONG
DurInDirVM
Total duration of direct inbound
voicemail message
LONG
NumInDirHold
The number of direct incoming call
put on hold (One call on hold
multiple times will count once only)
LONG
DurInDirHold
Total hold duration of direct
incoming calls
LONG
NumOutDirCon
nected
Number of direct outgoing
connected calls
LONG
DurOutDirTalk
Total talk duration of direct (nonworkgroup) outgoing connected
calls
LONG
NumOutDirHol
d
Count of direct outbound calls on
hold (One call on hold multiple
times will count once only)
LONG
DurOutDirHold
Total hold duration of direct
outbound calls
LONG
NumAgentBusy
Number of times agent is busy
LONG
DurAgentBusy
The duration of time when agent is
busy
LONG
NumInWrapUp
Number of times agent entered
Wrap Up
LONG
DurInWrapUp
Wrap-up duration of incoming
workgroup calls
LONG
NumOutWrapU
p
Number of wrap-ups for outbound
workgroup calls
LONG
DurOut
WrapUp
Wrap-up duration for outbound
workgroup calls
Specification
Table 7:AGENTSUMMARY3
Database
Element
Definition
Type
Specification
Version
Version of the record
LONG
2 = OE/ACM
5.0A
64 CDR Manual
Records and Data Schema
Database
Element
Definition
Type
Specification
NodeID
Server ID (System ID) assigned to an
AltiWare system in AltiWare
Administrator
LONG
value: 1–100
uid
Unique ID to link
AGENTSUMMARY1
LONG
CountLogon
WG
Count of workgroups that agent is
logged into
LONG
DurAgentLo
gon
The login duration when agent logs
into at least one workgroup
LONG
NumAgentA
vailable
Number of times agent is available
LONG
DurAgentAv
ailable
The duration while agent is in
available state
LONG
Table 8:AGENTSUMMARY4
Database
Element
Definition
Type
Specification
The following values are significant only when an agent logs into at least one workgroup. If
an agent doesn’t log into any workgroup, all values should be zero.
Version of the record
LONG
2 = OE/ACM
5.0A
NodeID
Server ID (System ID) assigned to an
AltiWare system in AltiWare
Administrator
LONG
value: 1–100
uid
Unique ID link to
AGENTSUMMARY1
LONG
NumAgentDND
Number of times agent entered DND
LONG
DurAgentDND
Total duration of the DND
LONG
NumAgentFWD
Number of times agent enable
extension forward and enter FWD
state
LONG
DurAgentFWD
Duration of agent in FWD state
LONG
NumAgentError
Number of times agent enter Error
State while login
LONG
Records and
Data Schema
Version
CDR Manual 65
Search Results
Database
Element
Definition
Type
DurAgentError
Duration of agent in Error State while
login
LONG
NumNotReady
Count of Agent enters Not-Ready
state
LONG
DurNotReady
Duration of Agent Not-Ready
LONG
Specification
Table 9: CDRMAIN
Database
Element
Definition
Type
Specification
Version
Version of the record
LONG
2 = OE/ACM 5.0A
NodeID
Server ID (System ID)
assigned to an AltiWare
system in AltiWare
Administrator
LONG
value: 1–100
StartTime
GMT start time of
record's period. Seconds
since 1970/01/01
00:00:00.
LONG
EndTime
GMT end time of
record's period. Seconds
since 1970/01/01
00:00:00.
LONG
GMTOffset
Offset to GMT time,
includes daytime
savings, in seconds; ex:
Pacific Summer time
25200
LONG
LocalDay
8 digit number
representing date
LONG
ex: 20040608 = 06/08/
2004
66 CDR Manual
Format: yyyymmdd
Records and Data Schema
Table 9: CDRMAIN
Database
Element
Definition
Type
Specification
DayOfWeek
Day of the week
LONG
0 = Sunday
1 = Monday
2 = Tuesday
3 = Wednesday
4 = Thursday
5 = Friday
6 = Saturday
SessionID
Session ID: a unique
number, usually 9 digits
or larger, assigned by
AltiWare to a call
LONG
SequenceID
A unique number to
identify multiple records
of same call (same
Session ID), beginning
with 0
LONG
TrunkCall
Trunk call or external
call
LONG
Direction of the call
(incoming or outgoing)
LONG
OriginalPriority
The first priority set by
the system for this call
(1-9)
LONG
StartPriority
Call priority at Start
Time (1-9)
LONG
EndPriority
Call priority at End Time
(1-9)
LONG
Direction
1=Internal
2=Trunk Call
1=Incoming
2=Outgoing
Records and
Data Schema
CDR Manual 67
Search Results
Table 9: CDRMAIN
Database
Element
Definition
Type
Specification
CallerType
Type of line for an
incoming call
LONG
0 = Unknown line type
1 = Ext analog
2 = Ext IP
3 = Reserved
4 = Ext virtual
5 = Workgroup
6 = Application Extension
7 = Analog Trunk
8 = T1 Trunk
9 = IP Trunk
10 = PRI Trunk
11 = not used
12 = E1 trunk
CallerPad
Line’s physical address
for an incoming call
CHAR
(5)
E.g. “0004”, where
“00”=slot, “04”=channel
Always “-1-1” for WG or
virtual extension
CallerNum
Caller phone number of
an incoming call
(extension number or
off-net PSTN)
CHAR
(41)
CallerName
Caller name for an
incoming call (provided
by CO for trunk calls; as
entered in AltiWare
Administrator for
extension calls)
CHAR
(65)
CallerTenant
Caller Tenant name
CHAR
CallerProject
Caller Project ID
LONG
68 CDR Manual
Records and Data Schema
Table 9: CDRMAIN
Database
Element
Definition
Type
Specification
TargetType
Called target line type
LONG
0 = Unknown line type
1 = Ext analog
2 = Ext IP
3 = Reserved
4 = Ext virtual
5 = Workgroup
6 = Application Extension
7 = Analog Trunk
8 = T1 Trunk
9 = IP Trunk
10 = PRI Trunk
11 = not used
12 = E1 trunk
Physical address of line
for a called target
UCHA
R
(5)
TargetNum
Number for a called
target
CHAR
(41)
TargetName
Name for a called target
CHAR
(65)
TargetTenant
Tenant name for called
target
CHAR
TargentProject
Project ID for called
target
LONG
TargetWGNum
Target workgroup
number
CHAR
WGSessionID
A unique Session ID for
workgroup call
LONG
OutGoingWG
Workgroup number for
an outgoing call, while
agent login
LONG
ConfSessionID
Conference Session ID
LONG
DNIS
DNIS number for
incoming call
CHAR
(33)
E.g. “0004,” where
“00”=slot and
“04”=channel
Records and
Data Schema
TargetPad
CDR Manual 69
Search Results
Table 9: CDRMAIN
Database
Element
Definition
Type
Specification
AccountCode
Account code
CHAR
(11)
1—10 digits in length
AADuration
Duration in seconds an
incoming call is
connected to the Auto
Attendant/IVR; multiple
connections to AA/IVR
in a single session
produces multiple
records
LONG
RingDuration
Duration in seconds a
call is ringing and in
workgroup queue
LONG
QueueDuration
Duration in seconds
when a call stays in a
queue.
LONG
VMDuration
Duration in seconds after
a call goes into a
voicemail box; includes
greeting, false attempts
at messages, successful
message, and review of
message
LONG
VMRecDuration
Duration in seconds of
recording time for a VM
message that was
completed
LONG
HoldDuration
Duration in seconds
while a call is on hold
LONG
TalkDuration
Duration in seconds of
talk time
LONG
RecordDuration
Duration in seconds of
recording
LONG
AnswerWithinS
LT
Call is answered within
Service Level Threshold
LONG
1=yes; 0=no
ExitState
State when call is
terminated
LONG
(see end of this table for
specifications for the 34
exit states)
70 CDR Manual
Records and Data Schema
Table 9: CDRMAIN
Database
Element
Definition
Type
Specification
AbnTargetType
Type of abandon forward
target
LONG
1=Abandon to AA
2=Abandon to Operator
3=Abandon to Extension
4=Abandon to Outside
Number
5 =Abandon to VM
6 = Abandon to
Application
7 = Abandon to Others
8 = Call Disconnected
Type of Advanced
Queue Management
Application
LONG
MMCallType
Multi-Media call type
LONG
PriorityQueueD
uration
The duration in seconds
of a call hold current
priority in queue
LONG
IVRExitPoint
Exit Point of IVR/AA
CHAR
(63)
IVRData
Data of IVR/AA
CHAR
(255)
UserData
Agent input
CHAR
(255)
FormData
Web form data
CHAR
URLData
Last URL
CHAR
(255)
When a call is transferred
from AA menu, the system
logs the exit AA point,
which is the AA item ID.
ExitState specifications (see database element ExitState on page 70):
1 = Auto Attendant: call exits in the AA / IVR.
2 = Forward: call is forwarded from an extension by configuration
forwarding.
CDR Manual 71
Records and
Data Schema
AdvQAppType
Search Results
3 = Call Redirect: call is redirected to another extension or trunk by the
AltiLinkPlus command "Redirect".
4 = Ring No Answer: call rang target but no agent answered.
5 = Busy: call tried to ring an agent but the agent extension was busy.
6 = Queue: call abandoned from the workgroup queue.
7 = Queue Overflow: call was forwarded by workgroup overflow
configuration.
8 = Connected: call connected with an agent, then disconnected.
9 = Conference: caller is conferenced with others, then disconnected.
10 = Conference Member: every member of a conference call will have a
record with this exit state.
11 = Hold: A calls B and is connected. B uses AltiView/AltiAgent to hold
this call. B drops, and now A is in "Hold" state. Then A drops. Call A
gets this exit state.
12 = Transfer: call is transferred by an agent who pressed flash to transfer
this call. A calls B and is connected. B presses flash, dials C, and is
connected to C. B drops. Call A with B gets this exit state.
13 = Transfer destination unavailable: A calls B. A presses flash and dials
C. C rings but no answer. A drops. Call A with C gets this exit state.
14 = Transfer Cancel: A calls B. B presses flash, calls C and is connected.
Then B presses flash to disconnect C and connect back with A. Call
B with C exits with "transfer cancel".
15 = Go to VM w/out leaving vm: A calls B. B is busy or ring no answer.
A goes into B's voice mail. A drops without leaving any voice mail.
16 = Go to VM with leaving vm: A goes into B's voice mail, leaves a voice
mail, and then drops.
17 = General VM: A presses ## to enter the voice mail system, inputs
password, then drops.
18 = VM Access: A presses ### to enter another extension’s voice mail,
then drops.
19 = VM Notify: A receives a notification call, enters password, then
drops.
20 = Call Pick Up: A calls B. While B is ringing, C enters #29B to pick up
this call. Call A with B gets this exit state.
72 CDR Manual
Records and Data Schema
21 = All Trunks Busy: A dials an outside number, and no trunk is seized.
A drops and gets this exit state.
22 = No session: A tries to log on to AltiView/AltiAgent/AltiConsole/third
party application, but there are no more licenses available.
23 = Personal Park: call is parked by #31.
24 = System Park: call is parked by #41.
25 = Line Park: call is parked by #51.
26 = Call Monitor: A runs AltiSupervisor and initiates a silent monitor or
barge in.
27 = Overhead Paging: Call presses #44 / #45 / #46 to page.
28 = Reminder Call: Call was preset as a reminder call.
29 = Group Member RNA: A calls a workgroup and rings an agent. The
agent does not answer the ring.
30 = One Number Access: A calls B and goes into B's one number access
menu.
31 = APC Connect: [never used.]
32 = Ring: call is dropped while it's ringing.
33 = Transfer Ring: A calls B. B presses Flash and dials C. While C is
ringing, B drops and A drops. Call A with C gets this exit state.
34 = Transfer Connected: A calls B and is connected. A presses flash, dials
C, and is connected too. A drops. Call A with C got this exit state.
Table 10: WGRTSUMMARY
Definition
Type
Specification
Version
Version of the record
LONG
2 = OE/ACM
5.0A
NodeID
Server ID (System ID) assigned to an
AltiWare system in AltiWare
Administrator
LONG
value: 1–100
StartTime
GMT start time of record’s period.
Seconds since 1970/01/01 00:00:00.
LONG
EndTime
GMT end time of record’s period.
Seconds since 1970/01/01 00:00:00.
LONG
CDR Manual 73
Records and
Data Schema
Database
Element
Search Results
Database
Element
Definition
Type
GMTOffset
Offset to GMT time, includes daylight
savings, in seconds; ex: Pacific
Summer time 22500
LONG
LocalDay
8 digit number representing date
LONG
Format:
yyyymmdd
LONG
0 = Sunday
ex: 20040608 = 06/08/2004
DayOfWeek
Day of the week
Specification
1 = Monday
2 = Tuesday
3 = Wednesday
4 = Thursday
5 = Friday
6 = Saturday
WGNum
Workgroup Number
LONG
CurNumAgent
Cfg
Total Agent configured to the WG
LONG
CurNumAgent
UnStaff
Total Agents Un-Staffed (Snapshot at
EndTime)
LONG
CurNumAgent
Logout
Total Agents Logged Out (Snapshot
at EndTime)
LONG
CurNumAgent
Error
Total Agents Error (Snapshot at
EndTime)
LONG
CurNumAgent
Busy
Total Agents Busy (Snapshot at
EndTime)
LONG
CurNumAgent
NotReady
Total Agents Not Ready (Snapshot at
EndTime)
LONG
CurNumAgent
WrapUp
Total Agents Wrap-up (Snapshot at
EndTime)
LONG
CurNumAgent
DNDFWD
Total Agents DND/FWD (Snapshot
at EndTime)
LONG
CurNumAgent
Available
Total Agents Available (Snapshot at
EndTime)
LONG
CurLongestQT
ime
Longest Queue Time (Snapshot at
EndTime)
LONG
CurQLength
Number of calls in Queue (Snapshot
at EndTime)
LONG
74 CDR Manual
Records and Data Schema
Definition
Type
CurNumCallO
verSLT
Number of calls exceed SLT
(Snapshot at EndTime)
LONG
CurServiceLev
el
Real-time Service Level % for WG
Queue (Snapshot at EndTime)
LONG
IntvMaxNumA
gentUnStaff
Maximum Agents Un-Staffed in
record's period
LONG
IntvMaxNumA
gentLogout
Maximum Agents Logged Out in
record's period
LONG
IntvMaxNumA
gentError
Maximum Agents Error in record's
period
LONG
IntvMaxNumA
gentBusy
Maximum Agents Busy in record's
period
LONG
IntvMaxNumA
gentNotReady
Maximum Agents Not Ready in
record's period
LONG
IntvMaxNumA
gentWrapUp
Maximum Agents Wrap-up in
record's period
LONG
IntvMaxNumA
gentDNDFWD
Maximum Agents DND/FWD in
record's period
LONG
IntvMaxNumA
gentAvailable
Maximum Agents Available in
record's period
LONG
IntvMaxLonge
stQTime
Maximum longest queue time in
record's period
LONG
IntvMaxQLen
gth
Maximum queue length in record's
period
LONG
IntvMaxNumC
allOverSLT
Maximum calls exceed SLT in
record's period
LONG
IntvMaxServic
eLevel
Maximum Service Level % for WG
Queue in record's period
LONG
IntvMinServic
eLevel
Minimum Service Level % for WG
Queue in record's period
LONG
Specification
Records and
Data Schema
Database
Element
CDR Manual 75
Search Results
Table 11: WGSUMMARY
Database
Element
Definition
Type
Specification
Version
Version of the record
LONG
2 = OE/ACM
5.0A
NodeID
Server ID (System ID) assigned to
an AltiWare system in AltiWare
Administrator
LONG
value: 1–100
StartTime
GMT start time of record’s period.
Seconds since 1970/01/01
00:00:00
LONG
EndTime
GMT end time of record’s period.
Seconds since 1970/01/01
00:00:00
LONG
GMTOffset
Offset to GMT time, includes
daylight savings, in seconds; ex:
Pacific Summer time 22500
LONG
LocalDay
8 digit number representing date
LONG
Format:
yyyymmdd
LONG
0 = Sunday
ex: 20040608 = 06/08/2004
DayOfWeek
Day of the week
1 = Monday
2 = Tuesday
3 = Wednesday
4 = Thursday
5 = Friday
6 = Saturday
WGNum
Workgroup Number
LONG
NumInWGCall
Total inbound WG call during
interval
LONG
NumInCallInQ
Total calls in queue during interval
LONG
DurInCallQ
Total queue duration during time
interval for all WG inbound calls
LONG
76 CDR Manual
Records and Data Schema
Definition
Type
NumInAnswered
Total WG inbound calls answered
by agents during interval. If a login
agent uses pick call from queue
feature in AltiAgent, this counter is
incremented. If the call is
transferred or parked, this call is
considered out of workgroup.
LONG
DurInTalk
Talk duration of incoming calls
(NumInAnswered), starting from
the time an agent answered a call
until the call is disconnected,
transferred or parked
LONG
DurInAnsQ
Total Queue time for answered
inbound WG calls
LONG
DurInAnsRing
Total ring time for answered
inbound WG calls
LONG
NumInXfer
Count of transferred incoming
workgroup calls
LONG
NumInWrapUp
Number of Wrap-ups for
workgroup incoming calls
LONG
DurInWrapUp
Wrap-up duration for incoming
calls
LONG
NumInAbnInQ
Total number of calls hang-up in
queue
LONG
DurInAbnInQ
Total queue time of calls hang-up
in queue
LONG
DurInAbnInQ_Ri
ngTime
Total ring time of calls hang-up in
queue
LONG
NumInAbnDuring
Ring
Number of calls hang-up during
ring (in queue or never in queue)
LONG
DurInAbnDuring
Ring
Total Queue time for calls hang-up
during ring
LONG
DurInAbnDuring
Ring_RingTime
Total Ring time for calls hang-up
during ring (in queue or never in
queue)
LONG
Specification
Records and
Data Schema
Database
Element
CDR Manual 77
Search Results
Database
Element
Definition
Type
NumInAbnVmMs
g
Number of calls abandoned to VM
leaving voice message (transferred
to VM from queue by caller
pressing a digit or the system
redirects the call to VM)
LONG
DurInAbnVmMsg
Total Queue time for calls
abandoned to VM leaving voice
message
LONG
DurInAbnVmMsg
_RingTime
Total Ring time for calls
abandoned to VM leaving voice
message
LONG
NumInAbnVmNo
Msg
Number of calls abandoned to VM
without leaving VM (redirected to
VM from queue by caller pressing
a digit or the system redirecting the
call to VM)
LONG
DurInAbnVmNo
Msg
Total Queue time for calls
abandoned to VM without leaving
message
LONG
DurInAbnVmNo
Msg_RingTime
Total Ring time for calls
abandoned to VM without leaving
message
LONG
NumInAbnToApp
Number of calls abandoned to addon applications
LONG
DurInAbnToApp
Total Queue time for calls
abandoned to add-on applications
LONG
DurInAbnToApp_
RingTime
Total Ring time for calls
abandoned to add-on applications
(in queue or never in queue)
LONG
NumInAbnToOth
ers
Number of all calls abandoned to a
target other than VM when caller in
queue presses a digit
LONG
DurInAbnToOthe
rs
Total Queue time for
NumInAbnToOthers calls
LONG
DurInAbnToOthe
rs_RingTime
Total Ring time for
NumInAbnToOthers calls
LONG
78 CDR Manual
Specification
Records and Data Schema
Definition
Type
DurInAbnQRing
DurInAbnInQ_RingTime+DurInA
bnDuringRing_RingTime+DurIn
AbnVmMsg_RingTime+DurInAb
nVmNoMsg_RingTime+DurInAb
nToApp_RingTime+DurInAbnTo
Others_RingTime
LONG
DurInAbnQ
DurInAbnInQ+DurInAbnDuringR
ing+DurInAbnVmMsg+DurInAbn
VmNoMsg+DurInAbnToApp+Du
rInAbnToOthers
LONG
NumInOverflow
WG calls overflowed or redirected
to other target
LONG
DurInOverflowQ
Total Queue time for overflowed
or redirected calls
LONG
DurInOverflowRi
ng
Total ring time for all overflowed
or redirected calls
LONG
NumInAnsWithin
SLT
Total calls answered with wait time
less than or equal to Service Level
Threshold within report interval
(QueueTime+RingTime <= SLT)
LONG
NumInHold
Number of inbound WG calls were
ever hold by agent (One call on
hold multiple times will count just
one time)
LONG
DurInHold
Duration of inbound WG calls
were hold by agent
LONG
NumInRecord
Number of inbound WG calls were
recorded
LONG
DurInRecord
Duration of inbound WG calls
were recorded
LONG
NumOutConnecte
d
Number of WG outbound
connected calls
LONG
DurOutTalk
Duration of outgoing WG calls
(NumOutConnected); from the call
enters "Connected" state until
disconnect
LONG
Specification
Records and
Data Schema
Database
Element
CDR Manual 79
Search Results
Database
Element
Definition
Type
NumOutHold
Number of outbound WG calls that
were put on hold by agent (One call
on hold multiple times will count
just one time)
LONG
DurOutHold
Duration of outbound WG calls put
on hold by agent
LONG
NumOutRecord
Number of outbound WG calls that
were recorded
LONG
DurOutRecord
Duration of outbound WG calls
that were recorded
LONG
NumOutXfer
Count of outbound WG calls that
were transferred by agent
LONG
NumOutWrapUp
Count of agent outbound WG calls
that entered wrap-up state
LONG
DurOutWrapUp
Total outbound WG Wrap-up
duration
LONG
NumInAbnInQWi
thinSLT
Total number of calls hang-up in
queue with wait time less than or
equal to Service Level Threshold
within report interval
(QueueTime+RingTime <= SLT)
LONG
NumInAbnDuring
RingWithinSLT
Number of calls hang-up in ring (in
queue or never in queue) with wait
time less than or equal to Service
Level Threshold within report
interval (QueueTime+RingTime
<= SLT)
LONG
NumInAbnVmMs
gWithinSLT
Number of calls leaving VM and
with wait time less than or equal to
Service Level Threshold within
report interval
(QueueTime+RingTime <= SLT)
LONG
NumInAbnVmNo
MsgWithinSLT
Number of calls abandoned
without leaving VM and with wait
time less than or equal to Service
Level Threshold within report
interval (QueueTime+RingTime
<= SLT)
LONG
80 CDR Manual
Specification
Records and Data Schema
Database
Element
Definition
Type
NumInAbnToApp
WithinSLT
Number of calls abandoned to addon applications with wait time less
than or equal to Service Level
Threshold within report interval
(QueueTime+RingTime <= SLT)
LONG
NumInAbnToOth
ersWithinSLT
Number of all other abandoned
calls (for example, Ext/WG/
External/AA/IVR) with wait time
less than or equal to Service Level
Threshold within report interval
(QueueTime+RingTime <= SLT)
LONG
NumInOverflow
WithinSLT
WG calls overflowed to other
target with wait time less than or
equal to Service Level Threshold
within report longerval
(QueueTime+RingTime <= SLT)
LONG
Specification
Table 12:EXTINFORMATION
Definition
Type
Specification
Version
Version of the record
LONG
2 = OE/ACM
5.0A
NodeID
Server ID (System ID) assigned to an
AltiWare system in AltiWare
Administrator
LONG
value: 1–100
ExtNum
Extension number
LONG
Type
Type of the extension
LONG
FirstName
First name of the extension
CHAR
(64)
LastName
Last name of the extension
CHAR
(64)
StartTime
GMT timestamp when extension is
created; seconds since 01/01/1970
00:00:00. 0 means the extension has
been created for the first time. Nonzero means actual start time.
LONG
EndTime
GMT timestamp when the extension
is removed
LONG
Records and
Data Schema
Database
Element
CDR Manual 81
Search Results
Database
Element
Definition
Type
Specification
StartTimeG
MTOffset
Offset to GMT time when the
extension is created, includes
daylight savings, in seconds; ex:
Pacific Summer time 25200
LONG
Format:
yyyymmdd
EndTimeG
MTOffset
Offset to GMT time when the
extension is removed, includes
daylight savings, in seconds; ex:
Pacific Summer time 25200
LONG
Format:
yyyymmdd
RevisionID
Revision ID, beginning from 0; the
bigger the number, the older the
record
LONG
Table 13:WGMEMBER
Database
Element
Definition
Type
Specification
Version
Version of the record
LONG
2 = OE/ACM
5.0A
NodeID
Server ID (System ID) assigned to an
AltiWare system in AltiWare
Administrator
LONG
value: 1–100
WGNum
Workgroup Number
LONG
ExtNum
Agent Number
LONG
StartTime
GMT timestamp when extension is
created; seconds since 01/01/1970
00:00:00. 0 means the extension has
been created for the first time. Nonzero means actual start time.
LONG
EndTime
GMT timestamp when the extension
is removed
LONG
StartTimeG
MTOffset
Offset to GMT time when the
extension is created, includes
daylight savings, in seconds; ex:
Pacific Summer time 25200
LONG
Format:
yyyymmdd
EndTimeG
MTOffset
Offset to GMT time when the
extension is removed, includes
daylight savings, in seconds; ex:
Pacific Summer time 25200
LONG
Format:
yyyymmdd
82 CDR Manual
Records and Data Schema
Database
Element
Definition
Type
RevisionID
Revision ID, beginning from 0; the
bigger the number, the older the
record
LONG
Specification
Records and
Data Schema
CDR Manual 83
Search Results
84 CDR Manual
Glossary
A
Abandonment - Incoming call where the caller decides to disconnect before
completing a call processing state in the phone system: listening and handling auto
attendant, while waiting in queue, or while in voice mail. (See also short calls.)
Account Code - A number entered by a caller to represent how the call should be
tracked or billed.
Agent - A service representative who consistently handles customer inquiries of all
types.
Agents Signed On - Number of agents, signed on to the phone system to be agents,
using their phone to sign-on.
All Trunks Busy - An All Trunks Busy record should have dialing extension in
party1, dialing number in Trunk Remote Number. If the call is made by out call
routing, out call route and overflow routes should be set.
All Trunks Busy means that there were no free outgoing trunks available for a given
route.
ANI (Automatic Number Identification) - The phone number of the person or site
making a phone call to the system. ANI is provided on T1/PRI circuits only, and
represents the billing number of the caller, not necessarily the phone number. For
example, ANI for people calling from a company.
ASA (Average Speed of Answer) - The amount of time, on average, that a company
wants to answer incoming calls. Also, the actual average amount of time it takes
before a caller is answered by an agent.
Auto Attendant Duration - The amount of time a caller is listening and responding
to call processing steps in the phone system auto attendant process.
Average Call Duration - The average amount of time calls are taking from phone
system answer to phone system disconnect.
C
CallerID - The phone number of the calling party. CallerID differs from ANI in that
CallerID is the phone number of the phone from which the caller is calling as
opposed to the billing number for the phone. If a caller is calling from a business,
the CallerID will be different from the ANI number, in most cases.
CDR Manual 85
Glossary
Analog - Telephone lines going to the central office (trunks) and/or telephone lines
going to the phone system desktop phonesets using standard analog
communication; voltage variations represent voice signals.
Calls in Queue - The number of calls waiting in a queue for an agent or answering
device.
Carrier - Voice telephone network provider such as AT&T, MCI, and Sprint.
Carrier # - The 10XXX dialed number which is used by a caller or the system to
inform the local switching system which Carrier has been selected to handle the
phone call. For example, AT&T is 10288.
CLID (Caller Line Identification) - European term for CallerID.
D
Disconnect - When a call disconnects from the phone system; if an extension
disconnects first, then…; if a incoming caller disconnects first, then…
DNIS (Direct Number Inward Service) - The phone number dialed by the caller.
Usually companies purchase a block of DNIS numbers from the local central office
so they may give customers direct access to key employees. DNIS numbers can be
800 numbers, which represent specific types of service offered to the public by a
company. DNIS numbers, in call centers, therefore, can conceptually be regarded
as applications.
Call Duration (Duration) - Average amount of time a call takes from phone
system answer to phone system disconnect.
E
Exit State - The state of the call in the phone system when the caller decided to
disconnect. The nominally correct exit state is when a caller disconnects during
conversation with a person or after leaving a voice message. Exit state numbers help
reporting tools describe the total calls that were abandoned early as well as normal
calls.
ExitQ - When the call exited a workgroup queue.
ExitVM - When the call exited voicemail.
Extension - The phone number of a phone on the phone system. AltiWare has
extension numbers representing phonesets (analog, IP), virtual extensions (logical
locations), and workgroups (queues for agents).
H
Handled Calls - The number of calls actually processed successfully to a normal
disconnect exit state. For example, answered by a person, or the person completed
a voice message or listening to a prompt.
Handled WG - The number of calls handled by a workgroup in the phone system.
86 CDR Manual
I
In WG Average Duration - The amount of time, on average, calls spent waiting
for a free agent while in a queue.
Inbound - Calls arriving into the phone system over trunks, either public or private
tie trunk lines.
IP (Internet Protocol) - IP is used to represent the concept and practice of
encapsulating voice into data packets carried on data networks, both private and
public, including the Internet.
IP Extension - An extension within the AltiWare phone system based on
encapsulated voice connections (IP voice) as opposed to analog phonesets. AltiGen
supports physical and IP phone sets.
IP Trunk - A digital connection to a LAN or Wide Area Network (WAN) that can
handle IP encapsulated voice transmissions.
L
Line - Pairs of wires that carry voice over analog circuits to the central office (i.e.,
trunks). Sometimes also used as station lines (extensions) and trunk lines (trunks).
M
MaxWaitTime - The maximum amount of time a call has waited in queue to be
handled.
Minutes (outbound) - While many fields may represent duration in minutes or
seconds, in this case the use of minutes is the number of billable minutes for phone
calls. This is particularly of interest for outbound phone calls, and is useful for
billing comparisons.
N
NodeID - The AltiWare system number (from 0–128) that was assigned to a given
system in ACC/ACM Admin. The number is used to separate CDR records from
different AltiServ systems when the records are collected jointly at one site using
one database server for consolidated reporting.
CDR Manual 87
Glossary
Log-off with reason code - An agent can log out of a workgroup because they have
a lunch break, classes, or other reasons. The manager establishes the meaning of
numeric codes, and the system records them when used.
O
Outbound - Calls placed by users of the phone system to the outside world over
public or private trunk circuits within the AltiWare system including analog, digital,
and IP types.
Outbound Workgroup - Outgoing calls placed by a workgroup agent who is
assigned and logged in to an Outgoing Workgroup.
OutCall Routing - Calls dialed on the system can be processed by the system using
routing tables. The routing tables and their configuration options are referred to
generically as outcall routing. Outcall routing permits companies to restrict the
types of outbound calls, change their dialing pattern, determine the type of trunk to
be used, and determine the type of carrier to be used.
Overflow Calls - Calls that cannot be handled by a primary service and spill over
to an alternative service. In the case of AltiWare, this applies to outgoing calls
finding all trunks busy for a given route table.
P
PAD - A Physical ADdress generalized to represent the physical slot on the
processor chassis where an interface board is located, and the channel assigned on
that interface board represents an extension or trunk port.
Party1 - Party1, found in the database schema, represents the first extension
originating an outbound call or answering a incoming call from a trunk. In a call
center, Party1 is typically the first agent to answer the caller.
Party2 Party2, found in the database schema, represents the second extension
answering an incoming call as the result of receiving the call via a call transfer or
call pick-up. In a call center, Party2 is typically the second agent (often a
supervisor) who answered the call.
Note:
Party2 accumulates the call handling time for any additional successive
call transfers or call processing. Therefore, the times shown for Party2 can
represent more than one additional extension to have handled an incoming
call. The “MoreThan2WG” CDR field will indicate if the Party2 field
represents multiple extensions handling the call after the first Party1 agent.
PRI - ISDN Primary trunks
Project OutCalls - AltiWare provides some, not all, of the features businesses find
useful in shared project environments.
88 CDR Manual
One supported area is tracking who placed an outbound call by business name or
dialing plan. This name is called the project name, is configured in AltiWare under
each extension, and is placed in the CDR record each time that particular extension
places an outbound call. The field is multi-purpose, so it can also be used by
businesses wanting to track calls by department for bill-back purposes. Mixed use
is not supported, for example, project and department.
Q
Queued Call - A call that has entered the queue as a result of not finding any free
agents in a workgroup or for an extension and must now wait for an extension to
become free. The queue duration associated with a queued call includes the ringing
time of the target extension.
R
Reason Code - A number, from 0–255, that was entered by a workgroup agent
using the AltiAgent application to indicate the reason they made themselves
unavailable to receive calls even though they may be scheduled for work. For
example, code 20 could represent a lunch break.
Route Name - The name of an outbound (outcall) route table entry. This is useful
to identify the type of routing treatment that was given to a call.
Route Table - A set of outbound call routing choices, provided by AltiWare within
outcall routing, are defined within a route table. The route table identifies the trunks
that should be used for calls assigned this route table. It also provides for how the
dialed number should be modified, if at all, and whether the number needs to be
preceded by a carrier code such as 10XXX.
Route Table Name - Same as Route Name. Route Table Name is the name
assigned to the route, and Route Name is the same name shown in reports under the
title Route Name.
Routes - Route is the selected trunk to carry a phone call to the outside world. Route
Tables determine which routes should be used and how to use them. If one route is
too busy (no trunks available), then the Route Table can be configured with an
alternative choice. Ultimately, the call takes a single, final route.
CDR Manual 89
Glossary
RNA (Ring No Answer) - the condition when a call reaches an extension and the
called extension does not answer. This can be true for any type of call to any
extension. However, within a call center, failure to reach an agent whose phone is
in the “signed-on and idle” state, getting an RNA is a problem. Calls getting an
RNA from an agent phone will be sent back to the queue (this is configurable) in
most cases. The agent's phone will then be taken out of service.
S
Score - This may or may not be found in the reports created within Call Analyst
depending on applications created by the customer, not Call Analyst or AltiGen.
Score is a number that represents how well a supervisor believes an agent has
handled a particular call that the supervisor has silently monitored. Using the
UserDefined fields provided in AltiWare's ActiveX AltiLink protocol and in its
CDR data schema, a customer can associate a score with a call.
Note:
This is a custom implementation.
Service Level% - The percentage of calls meeting the expectation for service set
by the owner of the call center system.
When reported in the AltiClient screens, Service Level% is a real time snap shot of
any given exact moment in the workgroup queue of calls meeting or exceeding
performance.
When reported in other custom reporting packages based on historical CDR data,
the service level will represent the average over a given time interval defined by the
program.
Service level is the number of calls waiting less than a threshold time interval
divided by the total number of calls in queue over the same interval. The threshold,
which is the maximum amount of time the company would like a caller to have to
wait for an agent, is configurable in ACC/ACM Admin.
Note:
See also data schema descriptions.
Session ID Number - A unique number, usually 9-digits or larger, assigned by
AltiWare to a call. This number uniquely identifies a call. If an incoming call is
transferred by an agent to an outside trunk, then an additional new CDR record is
created; however, this additional record retains the same SessionID. This permits
reporting programs to combine CDR records for the same call.
SignOff - The timestamp when a workgroup agent signed off from the workgroup.
SignOn - The timestamp when a workgroup agent signed on to the workgroup.
SignOn Duration - The difference between Sign-on and Sign-off pairs; times in
closest proximity. An agent can sign on and off more than once each day, so there
may be multiple such pairings in the CDR database.
Spillover - Overflow from one route table to the next.
T
T1 - T1 is a digital facility from the phone system (customer premise) to the central
office, or from one CPE site to another between systems (T1 tie trunks). Voice is
encoded as zeros and ones on a channel (i.e., conceptual trunk) using industry
standard encoding.
90 CDR Manual
Talk Duration - The amount of time, totaled or averaged, that an extension services
an incoming or outgoing call. Average talk durations are useful in call centers to
measure how well an agent handles callers.
Threshold - The maximum amount of time a company wants an incoming caller to
wait before they are serviced by an extension (an agent). This is related to service
level, and is expressed as “we want calls be serviced 90% of the time (service level)
in less than 20 seconds (threshold).”
Transferred Calls - Calls transferred to an extension, another workgroup, auto
attendant, voice messaging, or an outgoing trunk.
Trunk - The conceptual term for a voice connection to the outside world, such as
the central office or another site. When analog circuits are involved, the physical
wire pair is called a trunk.
When digital circuits are involved, the trunk is a logical, dedicated channel on the
digital connection.
When IP trunks are mentioned, it means a data packet with a specific destination IP
address, being sent out on a LAN or WAN.
Trunk PAD Number - The board and channel numbers respectively: “0102.”
Trunk Remote Number -
• The target phone number of an outgoing call, or
• The IP address of the target far-end system for either incoming or
outgoing IP calls.
Note:
The use of “trunk” is a misnomer.
Transfer-Trunk Number - If a call is transferred by an extension to a phone
number outside the phone system, then the target phone number is placed in this
field.
U
URL - If a caller enters the system via the Internet using AltiGen’s AltiWeb
software (Web Button) then this field will contain the URL address for the caller
accessing the system.
User Data -
• If a call comes in from the Web via AltiWeb, then this field may
contain form data from the web page if you designed your web page to
do so.
CDR Manual 91
Glossary
• The CALLID/ANI for an incoming call, or
• If a call is processed via auto-attendant and information is collected
and offered to an external application using the DDR function in autoattendant, then the external application can populate this field with
information about the call, collected or otherwise.
• The structure of user data is an array or buffer of name-value pairs.
You can have as many pairs as you wish, but the total buffer is only
128 bytes long. A name-value pair is your own field name followed by
the field value. Each name-value pair is separated from others by an @
character.
• User data can be loaded into messages sent to the system via AltiGen’s
ActiveX control, AltiX.
• User Data can be received within messages sent by AltiServ to an
external application via the auto-attendant DDR step and received by
an application using AltiGen’s ActiveX control, AltiX.
• User data is preserved when calls are transferred between extensions,
and between extensions across multiple AltiWare systems.
• User data is useful for screen pops and automated processing
application.
The customer needs to employ a system integrator in order to implement the use of
User Data.
V
VM Box Extension - The voice message mailbox is an extension number where
calls are sent to leave messages. VM box extensions are used for workgroups in call
centers as well as the standard uses for individuals.
VM Start Time - The time a call enters the voice mail system to potentially record
a message.
W
WorkGroup - The workgroup is an extension representing a collection of
individual extensions, such that each of these individual extensions can service a
call arriving at the workgroup extension number. If none of these extensions is
available at the time a call arrives, then the call is queued for this particular
workgroup—a workgroup queue.
In the call center sense, the workgroup can be configured for longest available agent
queuing.
92 CDR Manual
Wrapup Duration - The amount of time an agent takes to handle transaction
information on another system or on paper after handling a caller. Once the caller
disconnects, the agent's phone can be configured to be “unavailable” to the
workgroup queue for a fixed or variable period of time even though the agent's
extension is still signed onto the queue. This allows the agent time to wrap up.
The wrapup time can be a fixed number of minutes after which the agent is forced
back into taking calls, or it can be variable, controlled by AltiAgent, where the agent
“releases” their phone for the next call. The settings can be designed to allow agents
to control the wrapup time until a limit occurs (the fixed time).
Glossary
CDR Manual 93
94 CDR Manual
Index
Index
N
A
R
AGENTACTIVITY 58
AgentActivity 82
AGENTPERWGSUMMARY1 59,
60, 62, 64
AGENTSUMMARY 62, 64
ring no answer 31
route name 30
node ID 58, 60, 62, 63, 65, 66, 81,
82
C
call
detail 25
sequences 42
call reports, external
CDRMAIN 66
S
session ID 10
session ID number 67
SMDR 30
SQL 28
Stop button 18
system requirements 1
28
T
trunk
type
D
downgrade procedure
69
2
W
E
external logging 28
EXTINFORMATION 81
WGRTSUMMARY 73
WGSUMMARY 76
wrapup 31
G
glossary
30, 85
I
inbound call scenarios 42
installation requirements 1
L
link session ID number
login 31
logout 31
67
M
Microsoft SQL 28
multi-project naming
30
CDR Manual
95
Download PDF

advertising