Mitsubishi | XD480U | Mitsubishi

IP Link® Device Interface
Communication Sheet
mits_1_2085_15.pke
Revision: 4/24/2013
This document provides additional assistance with wiring your Extron IP Link enabled product to your device.
Different components may require a different wiring scheme than those listed below.
For complete operating instructions, refer to the user’s manual for the specific Extron IP Link enabled product or
the controlled device manufacturer supplied documentation.
Device Specifications:
Device Type:
Manufacturer:
Firmware Version:
Model(s):
Video Projector
Mitsubishi
5.00
XD480U, XD450U, XD460U, XD490U
Version History:
Driver
Version
Date
15
14
04/22/2013
10/20/2011
1.5.1
1.4.0
3.3.2
3.2.0
13
12
8/4/2010
5/18/2010
1.4.0
1.4.0
3.2.0
3.1.1
11
12/11/2009
1.4.0
3.0.2
Extron Certified. Tested on XD490U.
10
08/19/2009
1.4.0
3.0.0
Updated for MLC62 support.
7
11/24/2008
1.3.11.1
2.4.1
Fixed Lamp Hours issues.
6
04/28/2007
1.3.11.1
2.4
5
04/04/2006
1.0.9.3
2.1
Added Lamp Mode. Removed XD400U model. Updated to
new standards.
Extron Certified. Added models XD460U & XD490U.
4
3
09/02/2005
05/23/2005
1.0.9.3
1.0.9.3
2.0
N/A
Extron Certified. Added AV Mute (toggle).
Extron Certified. Custom version. Added AV Mute (toggle).
2
03/29/2005
1.0.9.3
N/A
Extron Certified. Tested on XD480U.
1
02/04/2005
1.0.9.3
N/A
Initial version. Tested on Mitsubishi XL5950U.
IP Link
Compiler
GC
Version
Notes
Modified Lamp Hours query.
Extron Certified. Modified Maximum Lamp Hours Value for
GVE compability.
Extron Certified. Fixed Video Mute timing issues.
Extron Certified. Modified driver to turn off AV Mute before Input
switching and Power Off. Removed Video Mute and replaced with
AV Mute.
Driver Notes:
Queries will not be executed for 10 seconds after the power is turned on.
Page 1 of 4
IP Link® Device Interface
Communication Sheet
mits_1_2085_15.pke
Revision: 4/24/2013
Control Commands & States:
Aspect Ratio
4:3 / 16:9
Auto Image*
Execute
AV Mute
On
Freeze
Off/On
Input
Computer 1
Computer 2
Video 2
DVI
Lamp Mode
Normal Mode
Eco Mode
Power
On
Off
Volume (Step)
Up
Down
Volume (Discrete)
0 to 21
Off
Video 1
*: Not available for inputs Video 1 or Video 2.
Status Available:
Connection Status
Connected
Disconnected
Input
Computer 1
Computer 2
Video 2
DVI
Lamp Usage
Hours
Lamp Mode
Normal Mode
Eco Mode
Power
On
Off
Power Status
On
Off
AV Mute
On
Off
Volume (Discrete)
0 to 21
Page 2 of 4
Video 1
Status Unavailable
IP Link® Device Interface
Communication Sheet
mits_1_2085_15.pke
Revision: 4/24/2013
MLC60 Series Supported Commands:
Aspect Ratio
4:3 / 16:9
Auto Image
Execute
AV Mute*
On
Freeze
Off/On
Input*
Computer 1
Computer 2
Video 2
DVI
Lamp Mode
Normal Mode
Eco Mode
Power*
On
Off
Volume (Step)
Up
Down
Volume (Discrete)
0 to 21
Off
*AV Mute should be off before switching Inputs or powering off.
Page 3 of 4
Video 1
mits_1_2085_15.pke
IP Link® Device Interface
Communication Sheet
Revision: 4/24/2013
Cable and Adapter Requirements:
M/F RS-232 Null Modem Serial Cable
Use the RS-232C cable (Mini 8P to D-SUB 9P) that is supplied with projector
Notes for the Device:
 Auto Image - Not Applicable to Video Inputs
 This projector cannot switch inputs while video mute is on.
Serial communication:
Port Type: 8 Pin Mini Din(F)
Baud Rate: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
Pin Assignments Diagram:
Note: Captive screw connector may also be used as a serial connection.
General Notes:
Page 4 of 4
Download PDF

advertising