RMB 1075
High Current Five Channel Amplifier
Description
This multi-channel power amplifier delivers 120 watts (all channels driven), thanks to a power supply composed of a generous 1,500 VA toroidal transformer and eight 10,000 μf British-made Slit Foil capacitors. 20 output devices, each of which is rated for 130 watts and 15 amperes of current capability, make full use of the supply’s potential. The RMB-1075’s generous headroom and state of the art signal-to-noise measurements ensure unsullied reproduction of the most dynamic as well as the most delicate sonic nuances. Complete with gold plated RCA and DB-25 input connectors, the RMB-1075 is ideally suited for either home theater applications or bi-amped systems optimized for music reproduction. Separate 12 volt “trigger” input and output jacks make this amplifier well suited for fully integrated systems with total remote control capability.
Specifications
Power Configurations: 5 x 120 watts
Watts/Channel
all channels driven, unbridged,
8 ohm load, 20 to 20k Hz,
0.06% THD
120 watts
THD (20-20,000Hz)
cont. rated power
one-half rated power
one watt per channel
0.03%, maximum
0.03%, maximum
0.05%, maximum
IM Distortion (at rated ower, 60Hz:7kHz = 4:1) 0.03%, maximum
Damping Factor (8 ohms) 180
Input Sens. / Impedance
Frequency Response
S/N Ratio (IHF A)
Power Consumption
Dimensions (W x H x D)
Front Panel Height
Weight (net)
1.0V / 27 kohms
15-100kHz (=0.5, -3dB)
115dB
800 watts
433 x 189 x 380 mm
17 1 /
8
x 7 1 /
2
x 15"
176 mm, 6.9"
17 kg / 37.4 lbs
The Rotel Co. Ltd.
10-10 Shinsen-Cho
Shibuya-Ku,
Tokyo 150, Japan
Rotel of America
54 Concord St.
N. Reading, MA 01864
USA
T +1 978 664 3820
F +1 978 664 4109 www.rotel.com
Rotel Europe
Dale Road
Worthing
West Sussex BN11 2BH, UK
T +44 (0) 1903 221 763
F +44 (0) 1903 221 525
