Maxtor | Standalone DVR 2007 | User manual | Maxtor Standalone DVR 2007 User manual

VODVR S04IR
USER MANUAL
2007 Feb.
Ver 1.0
USB
4 CHANN
4CH STANDALONE DVR
CONTENT
1、FEATURE
2
2、SPECIFICATIONS
3
3、INSTALLATION
4
4、FRONT PANEL
5
5、OPERATING MANUAL
6
6、VIEW CONTROL
11
7、PLAYBACK CONTROL
11
8、RECORD CONTROL
12
9、NTSC/PAL SETUP
12
10、4 CHANNEL RECORDING HOURS
13
11、DVR Viewer User Guide
14
Warning !!
Please use the certified hard driver below
to avoid the compatibility problem.
HDD Compatibility:
Brand Name
Capacity
Samsung
80GB / 160GB
Seagate
80GB / 160GB
Maxtor
80GB / 160GB
4CH STANDALONE DVR
1、FEATURE
1、 Definitely Standalone.
2、 Real Time Refresh Rate.
3、 Display While Recording.
4、 Frame Recording & Quad Recording.
5、 Compatible of NTSC/PAL format.
6、 Advanced MJPEG.
7、 Manual / Motion / Programmed
8、 Search by Time / Date.
9、Watch dog feature.
10、HDD Volume Indicator.
11、Can use USB to link PC, Player can search Time to Play、
saving and take photos functions.
12、Internal motion detect feature.
13、Remote Control.
4CH STANDALONE DVR
2、SPECIFICATIONS
OPERATION SYSTEM
Embedded RTOS
Video Input
NTSC/PAL
Video Input Channel
Video Output Channel
Display Frame
4CH Composite
2CH Composite (VCR OUT / MONITOR OUT)
NTSC
120 fps (4x30 fps)
PAL
100 fps (4x25 fps)
Recording Frame
NTSC
Max. 30 fps
Rate(QUAD)
PAL
Recording Frame
NTSC
Max. 7.5fps(30 fps/4)
PAL
Max. 6.25fps(25 fps/4)
Rate(EACH)
Recording Mode
Max.
Continuous / Motion / Programmed
Display
Resolution
Recording
Advanced
Compression Format
MJ PEG
HDD
NTSC
720x480
PAL
720 x 576
NTSC
640x224
PAL
640x272
Low
12K Bytes / Frame
Normal
15K Bytes / Frame
High
20K Bytes / Frame
400G X 2
Backup Device
Search
25 fps
(Max)
VCR
Mode
Time / Date / Event
Full screen
YES
MOTION DETECT
YES
LOSS DETECT
YES
BUZZER OUTPUT
YES
Brightness adjust
YES
Contrast adjust
YES
USB Output
YES
System a monitor
Power recover auto restore record mode
Power supply
DC 12V / 4A(AC110V-240V 50/60HZ)
Dimension
220mm x 288mm x 48mm (W x D x H)
W eight
2KG
-3-
4CH STANDALONE DVR
3、INSTALLATION
REAR PANEL
VIDEO OUT
VIDEO IN
1
CH1
CH2
CH3
CH4
2
DC12V
(1)
(2)
(3)
(1)
Video Output : Corresponding to Video Input.
(2)
Video IN : Cameras to Video Input.
(3)Power Input : Please use the power supply attached
Adaptor
:
DC-12V / 4A
-4-
4CH STANDALONE DVR
4、FRONT PANEL
(3)
(2)
(16)
(1)
(1)
(4)
(5)
(10)
(11)
Record Indicator
(2)
(6)
(7)
(12)
(8) (9)
(13)
(14)
(15)
DVR REMOTE CONTROL
HDD #1 Indicator
(3)
HDD #2 Indicator
(4)
1
(5)
2
Camera #1 Display (Ch1)
Camera #2 Display (Ch2)
(10)
3
1
(4)
(11)
4
2
(5)
(12)
(6)
(13)
(7)
(6)
MENU, Percentage of the Hard Drive recorded
(7)
SELECT
(14)
(8)
(8)
RECORD / STOP
(15)
(9)
(9)
PLAY / PAUSE
(10)
3
Camera #3 Display (Ch3)
(11)
4
Camera #4 Display (Ch4)
(12)
UP
(13)
DOWN
(14)
RF
(15)
FF
(16)
USB Port
-5-
4CH STANDALONE DVR
5、OPERATING MANUAL(MAIN MENU)
MAIN MENU
SYSTEM SETUP
CAMERA SETUP
RECORD SETUP
RECORD SCHEDULE
HARD DRIVE SETUP
SYSTEM RESTORE
(
) :SELECT
Press
Press
(
):SET
(
to select items, use
to exit
):EXIT
to enter.
5-1 、SYSTEM SETUP
SYSTEM SETUP
BUZZER ALARM TIME
VLOSS ALARM
MOTION ALARM
PASSWORD SETUP
TIME SETUP
(
) :SELECT
(
:02 S
:ON
:ON-OFF
):SET
(
):EXIT
(1) Buzzer Alarm Time Setup: 1-30 sec.
(2) VLoss Alarm:ON/OFF.
(3) Motion Alarm:ON-OFF(4 Type) ,front is Alarm, behind
is jump to alarm a picture.
-6-
4CH STANDALONE DVR
5-1-1 、PASSWORD SETUP
Select this item to change password :
OLD PASSWORD
NEW PASSWORD
PASSWORD
CONFIRM
:______
:______
:______
(1) When the new password is accepted, the board will flash the
following screen message.
“ PASSWORD CHANGING ”
(2) If the password was not accepted, you will receive a message
that inform you.
“ INCORRECT ”
*Use the view control button on the front panel to input
the umber.
5-1-2 、TIME SETUP
Select this item to set up current time.
Time format:yyyy/mm/dd
TIME SET
2004/12/17 18:00:30
SHOW : UP 1
(
) :SELECT
*Press
Press
(
):SET
(
):EXIT
to setup time. Use
to change value.
to exit and to save data.
Show Time setup:
UP 1
: Displayed on up-right corner of screen, date & time listed
in a rows.
UP 2
: Displayed on up-right corner of screen, date & time listed
in two rows.
DOWN1 : Displayed on down-right corner of screen, date & time
listed in a rows.
DOWN2 : Displayed on down-right corner of screen, date & time
listed in two rows.
-7-
4CH STANDALONE DVR
5-2 、CAMERA SETUP
CAMERA SETUP
CAMERA
RECORD SETUP
BRI SETUP
CON SETUP
MOTION SETUP
SENSITIVITY SETUP
(
) :SELECT
Press
Press
(
:CH1
:ON
:05
:05
:ON
:05
):SET
(
):EXIT
to select items. Use
to change data.
to exit and to save data.
(1)Camera select (default value Ch1).
(2)Record Set up : yes or no record.
(3)Brightness / Contrast Set up : default value is 5.
(4)Motion Set up : motion detector, ON/OFF.
(5)Sensitivity Set up : sensitivity setup of motion detector.
5-3 、RECORD SETUP
RECORD SET
RECORD SETUP
VIDEO QUALITY
RECORD FRAME RATE
MOTION REC. FRAME RATE
MOTION RECORD TIME
(
) :SELECT
(
):SET
-8-
:EACH MODE
:NORMAL
:30 fps
:15 fps
:05 SEC
(
):EXIT
4CH STANDALONE DVR
(1) Record Setup:EACH MODE (frame recording),
QUAD MODE (quad recording).
(2) Video Quality: video quality selection: High, Normal, Low
(3) Record Frame Rate: QUAD MODE frame rate alternatives as follows:
→30、20、15、10、7.5、6、5、4、3、2、1
→In this mode
、
1
、
2
3
、
fps.
4
invalid. Each Mode frame rate
alternatives as follows:
→Maximum : 7.5 fps each camera
Totally :30 fps = 7.5 x 4 CH
(4) Motion Record Frame Rate: Setting Record Frame Rate as(3)
in Motion detector mode.
(5) MOTION Record Time : maximum 60 seconds sensor recording time.
(4)(5) Record Schedule only valid in “ S ” selection.
5-4 、PROGRAMMED RECORD
PROGRAMMED RECORD
TTTTTTTTTTTTTTTTTTTTTTTT
:
:
:
:
:
:
:
:
0
3 6
9 12 15
18 21
(
) :SELECT
Press
Press
(
):SET
(
):EXIT
to select items. Use
to change record mode.
to exit and to save data
(1)Use
to change record mode.
(2)Range: 0-24 hrs.
(3)Set “T” for continuous recording.
(4)Set “M” for sensor recording. Please refer to 5-3 MOTION setup.
(5)Set up “ - ” to disable the record time.
★ If you want to enable Motion Recording, Please finish the setup
procedure a. and b.
a. Select “MOTION SETUP: ON” in the menu option “CAMERA SETUP”.
b. Set “PROGRAMMED RECORD” --- “M” in the menu option
“RECORD SCHEDULE”.
-9-
4CH STANDALONE DVR
5-5、
HARD DRIVE SETUP
HARD DRIVE SETUP
OVERWRITE ENABLED
MASTER HDD SIZE
MASTER HDD USED
MASTER HDD FORMAT
SLAVE HDD SIZE
SLAVE HDD USED
SLAVE HDD FORMAT
(
) :SELECT
(
(YES )
80000MB
0MB0 %
N/A
N/A
):SET
(
):EXIT
(1)Overwrite Enabled
YES : Overwrite.
NO
: Stop Recording.
(2)Master HDD Status
Indicates use of the master HDD including volume & percentage
(3)Master Format
Select this item to format HDD, screen show:
PASSWORD INPUT (6) -----6 digits.
If password correct, the screen shows : “ password correct “
Otherwise, it shows: “ password incorrect “
* Factory default password:111111
* HDD must be formatted before installation, replacement &
re-installation.
-10-
4CH STANDALONE DVR
5-6、 SYSTEM RESTORE
6、VIEW CONTROL
(1)Can use the following view control to monitor images from cameras.
1
Camera #1 (Ch1), return to Quad Mode by press again.
2
Camera #2 (Ch2),return to Quad Mode by press again.
3
Camera #3 (Ch3),return to Quad Mode by press again.
4
Camera #4 (Ch4),return to Quad Mode by press again.
(2)Prior to view control, HDD must be formatted. Either “EACH MODE”
or “QUAD MODE” should be selected. (Refer to 5-3)
(3)In mode of “QUAD MODE”, view control is only for quad display not
available for CH1, CH2, CH3, Ch4
7、PLAYBACK CONTROL
(1)Press , and the system shows the recorded period.
(2)Each period is as four hour
SEARCH TIME
HARD DRIVER: MASTER
04/04/01 02:47:56 - 04/04/01 02:47:56
01 TIME
02 TIME
03 TIME
(
(
Press
):SELECT
)EXIT (
Select HDD
Select Start Date/
Time to End Date/Time
2004/12/10 02:47:50
2004/12/10 02:47:50
2004/12/10 02:47:50
(
)SET
)SELECT
(
)PLAY
EVENT/TIME
to select EVENT or DATE / TIME , Press
-11-
Event record
start Date/Time
to exit.
4CH STANDALONE DVR
(1)EVENT :
Press
choose one period, then press
to play.
(2)DATE / TIME :
The signal ”>” goes up to the “HARD DRIVER: MASTER”. Press
to select items. Use
select to change data, Then press
to play.
(3)PLAYBACK :
*Press
to speed forward. Continue to press
and show
x2、x4、x8 multiple playing.
*Press
*Press
*Press
to show x2 multiple back motion.
to pause.
to stop.
8、RECORD CONTROL
(1)Press " " key to start recording.
Icon " " indicates recording.
(2) During recording, the mark ” * ” appears in status of overwriting
9、NTSC / PAL SYSTEM SETUP
*J1 Jumper Setting as follow
NTSC
J1
PAL
J1
-12-
4CH STANDALONE DVR
10. 4CH Recording Hours on 80GB Hard Drive
*Thereinafter a rough estimate a table for reference only, recording data
quantity can follow an image a variation a rate somewhat different.
Recording Results in NTSC Format
30 fps
Video
Signal
Display
Format
QUAD
MODE
NTSC
EACH MODE
(Full Screen)
15 fps
7 fps
1 fps
Video
Quality
High
36Hours
72 Hours
144 Hours
1,080 Hours
Normal
48 Hours
96 Hours
192 Hours
1,440 Hours
Basic
58 Hours
116 Hours
232 Hours
1,740 Hours
High
64 Hours
128 Hours
256 Hours
1,920 Hours
Normal
90 Hours
180 Hours
360 Hours
2,700 Hours
448 Hours
3,360 Hours
Basic
112 Hours
224 Hours
Recording Results in PAL Format
25 fps
Video
Signal
Display
Format
QUAD
MODE
12 fps
6 fps
1 fps
Video
Quality
High
38 Hours
76 Hours
152 Hours
950 Hours
Normal
48 Hours
96 Hours
192 Hours
1,200 Hours
Basic
60 Hours
120 Hours
240 Hours
1,500 Hours
High
62 Hours
124 Hours
248 Hours
1,550 Hours
Normal
90 Hours
180 Hours
360 Hours
2,250 Hours
Basic
118 Hours
236 Hours
472 Hours
2,950 Hours
PAL
EACH MODE
(Full Screen)
-13-
4CH STANDALONE DVR
11.DVR Viewer User Guide Revision V2.3.N.EN
Introduction
This document is the Operation Manual for DVR Viewer. The application will show
you stream image stored in the HDD which was previously formatted and recorded
by the DVR.
If any DVR HDD is connected to your PC, the application will automatically detect
the HDD and show the recorded stream. You can also save the current screen to a
BMP file, and save the current stream to a MYS stream file or an AVI file.
*We suggest to backup the video stream in MYS format for the fast speed.
The application consists of two functional modules:
DVR HDD PC Viewer
Shows stream stored in the HDD directly.
MYS File Player
Plays captured stream MYS file.
Requirement
OS
Windows 2000 SP4 / XP SP2 or later
DirectX
DirectX 7.0 or later
Recommendation
CPU
1.0 GHz or Higher
RAM
256 MB or Greater
Installation
Hardware Installation
As stated above, the application shows stream which is stored in DVR HDD.
Before installing and executing the application, make sure that you connected DVR
HDD to the IDE cable of your PC directly, or via USB HDD adaptor
-14-
4CH STANDALONE DVR
Software Installation
Make sure that the OS of your PC is Windows 2000 SP4 or later [XP SP2 or 2003].
Otherwise, the application will not operate properly. Double click on the
DVR_Setup.exe to install the program.
Execution
Just double click the shortcut of the execution file. The application first detects
physical HDDs installed at your PC and search for DVR HDD among them.
This process may take up to 1 minute.
Shortcut to play the video files on your PC via the attached USB cable:
a. Connect USB cable both ends to the USB port of the DVR and your PC.
b. Supply 12VDC power to the DVR.
c. Wait until the message of USB detected pops up on the VGA monitor.
d. Run the PC Viewer software accordingly.
e. Wait until the very first image comes up to the PC Viewer.
f. Click “Play” icon on the control panel of the PC Viewer to start
viewing the video files.
-15-
4CH STANDALONE DVR
DVR Viewer
User Interface
Functions
Valid Stream Region Indication
Once a DVR HDD is selected, the application detects valid stream region where valid
video stream resides. You can drag this to access the whole streams of the DVR HDD.
-16-
4CH STANDALONE DVR
Direct Access
If the stream stored in a DVR HDD is quite long, you may have difficulty to find the
exact scene you want to see. When you find a scene you would like to show your
friend or report to police officers later, please remember the number in the Direct
Access Input edit box, so that you can go there directly by entering the number in
the edit box and pressing “GO” button besides it.
Events List Button
You can access the latest 64 events and go to the event directly by this button.
-17-
4CH STANDALONE DVR
Configure
Options Button
You can change application settings such as MYS file save directory,
or default video mode (NTSC/PAL). To change setting, press Options button
Status Button
Show the status on the screen.
Reset Button
Reset the program.
Playback
Once a DVR HDD is selected, the application automatically displays first screen
recorded at the very beginning of it. Then, you can see stream at anywhere within
the valid stream reason.
Channel Selection
The default screen display channel setting is ALL CHANNEL, which shows all four
channel (if the stream has 4 channel streams) at the same time. If you want to see
a channel only or enlarge one channel, press any channel button you want.
-18-
4CH STANDALONE DVR
HDD Selection
Once the application detects one or more DVR HDDs, it automatically selects the
first DVR HDD. You can select any DVR HDD [the DVR HDDs are marked as "VY HDD ".
However, you cannot select the normal HDD, which may be Windows-formatted one.
Capturing Button
Screen Capturing
If you want to capture, or backup, current screen, press Capture Current Screen
button. Then it will capture the current screen and saves it as BMP file.
Stream Capturing Button
If you wan to capture, or backup, current stream, press Capture Current Stream
button.Then it will record the stream you want. It will create .MYS file, whose format
is Vineyard Technologies’ proprietary stream file format. You can play the recorded
file using MYS file player.
Stream Capturing Button
If you wan to capture, or backup, current stream, press Capture Current Stream button.
Then it will record the stream you want. It will create .AVI file. You can play the recorded
file using any player which support AVI file.
MYS File Player
You can play the recorded MYS file using MYS file player.
-19-
Download PDF