York | CSA DH 036 | t - Johnson Supply

SUBMITTAL DATA SHEET
®
SPLIT SYSTEM CONDENSING UNITS
3 thru 5 TON
MODELS: H*DH036 & H*DH060
JOB NAME:
LOCATION:
PURCHASER:
ORDER NO:
ENGINEER:
SUBMITTED TO:
FOR:
REF:
APPROVAL:
SUBMITTED BY:
DATE:
UNIT DESIGNATION:
SCHEDULE NO.
PRODUCT DATA
CONSTRUCTION:
MODEL NO.
DIMENSIONS - INCHES
Cooling Performance
Total Capacity
________ MBH
Outdoor Design Temp
C
B
_________ °F
Electrical Data
Power Supply
____/___/_____
Total Unit Ampacity
________AMPs
Power Input Req
__________KW
Minimum Wire Size
_________AWG
7/8 dia hole
w/ 1-1/8 k.o.
(power wiring)_
A
7/8 dia.
hole w/bushing
(control wiring)
Maximum Overcurrent Device
†
Fuses
†
Circuit Breaker
Unit Weight
Unit Weight
________LBS
5-1/2
Vapor Connection
2-3/8
Liquid Connection
3-1/8
DIMENSIONS
REFRIGERANT
CONNECTION
UNIT MODEL
LINE SIZE
A
LIQUID
VAPOR
H2DH036
37-7/8
5/16
3/4
H2DH042
37-7/8
H2DH048
37-7/8
3/8
7/8
H2DH060
37-7/8
All dimensions are in inches.They are subject to change without notice.
Certified dimensions will be provided upon request.
Unitary Products Group
036-22061-001 Rev. A (7/00)
FEATURES
MATCHING AIR SIDE EQUIPMENT
•
UL approval (units & accessories)
•
CSA listed and ARI certified
•
5-year limited parts warranty
•
10-year limited warranty on thecompressor
•
Copper tube/aluminum fin coil
•
Crankcase Heater as standard
•
Two-speed fan
•
Durable construction
•
Pre-painted steel cabinet
•
Factory wired
•
R-22 total system charge (thru 15 ft. of lines)
•
Sweat refrigerant connections
•
Re-usable service valves
•
Easy access to electrical and compressor compartments
Variable Speed Air Handler Model No.
Variable Speed Furnace Model No.
Coil Model No.
Submittal Form No.
(________________)
(________________)
(________________)
(________________)
FIELD INSTALLED ACCESSORIES
Stub Adapters
Precharged Line Sets
Off Cycle Timer (2TD08700124
Thermostats
Blower Off Delay (2FD06700224)
.
(________________)
(________________)
(________________)
(________________)
(Refer to form 550.36-TG1Y for detailed specifications on the unit
and its accessories.)
CLEARANCES
Front of Unit............................ 24 inch
All Other Sides ....................... 12 inch
Above Unit .............................. 48 inch
Below Unit .............................. 0 inch
*Must be installed for proper
performance.
NOTES:
___________________________________________________________________________________________________________
___________________________________________________________________________________________________________
___________________________________________________________________________________________________________
_______________________________________________________________________________________________________
Subject to change without notice. Printed in U.S.A.
Copyright © by Unitary Products Group 2000. All rights reserved.
Unitary
Products
Group
036-22061-001 Rev. A (7/00)
Supersedes: 550.36-SD2Y (1294)
5005
York
Drive
Norman
OK
73069
Download PDF