AT&T | 1306 | User manual | AT&T 1306 User manual

ATT-5860CIB-d2.qxd
1/3/2004
11:06 AM
Page 1
User Manual (Part 2)
5.8 GHz Cordless
Telephone/Answering
System E5860
with Caller ID & Call Waiting
ATT-5860CIB-d2.qxd
1/3/2004
You must install and
charge the battery before
using the telephone
11:07 AM
Page 2
STOP!
See page 7
for easy instructions
For customer service or product
information, visit our web site at
Please also read
www.telephones.att.com
or call 1-800-222-3111
Enclosed in product package
Important Product Information
Add new handsets to make your phone more versatile (see page 41)
Your telephone can accommodate up to 8 cordless handsets. You can add new
handsets (sold separately) at any time. Up to 4 handsets at a time can be used.
The handset provided with your telephone is automatically registered as Handset 1.
Additional handsets will be assigned numbers in the order they are registered (2, 3, 4,
etc.) up to a maximum of 8 handsets.
Handset 1
Handset 2
Handset 3
Copyright © 2004 Advanced American Telephones. All Rights Reserved.
AT&T and the Globe Design are trademarks of AT&T Corporation.,
licensed to Advanced American Telephones.
ATT-5860CIB-d2.qxd
1/3/2004
11:07 AM
Page 1
User Manual (Part 2)
5.8 GHz Cordless
Telephone/Answering
System E5860
Table of contents
Getting Started
Base Calls Log
Quick reference guide ........................2
Parts checklist .......................................4
Before you begin ..................................5
Telephone base installation................6
Battery installation & charging ..........7
Wall mounting ......................................8
Belt clip & optional headset...............9
To review Caller ID log ...................28
To dial a Caller ID entry ..................29
Answering System Operation
Answering system operation ..........30
Day and time announcements ........31
Outgoing announcements................32
Announce Only mode ......................33
Changing feature options .................34
Message playback ...............................35
Recording and playing memos ........36
Message window displays.................37
Remote access....................................38
Telephone Operation
Basic handset operation ...................10
Basic base operation .........................11
Options during calls ..........................12
Intercom calls .....................................13
Handset screen images.....................14
Handset sounds & alerts ..................15
Handset settings.................................16
Base settings........................................17
Appendix
Display screen status icons..............39
Alert tones & indicator lights..........40
Adding new handsets ........................41
Charging spare batteries ..................42
In case of difficulty .............................43
Technical specifications ....................45
INDEX..................................................46
Remote access wallet card ..............49
Phonebook Directory
New phonebook entries ..................19
Phonebook search .............................20
To dial, edit or delete entries .........21
Handset Calls Log
To review voice messages ...............23
To review Caller ID log ...................24
To dial a Caller ID entry ..................25
To review redial log ..........................26
1
ATT-5860CIB-d2.qxd
1/3/2004
11:08 AM
Page 2
Getting Started
Quick reference guide
Handset
Up
Left
Select
Right
Down
Softkeys
NavKey
Press center button to display menus.
Press NavKey buttons to navigate
through menus. Press center button to
select menu item highlighted.
Press a softkey to select a menu item
displayed just above the key.
Off/Cancel
Phone/Flash
Press to begin a call, then dial a number.
During a call, press to hang up.
During a call, press to receive an incoming
call, if Call Waiting is activated (see page 12).
While using menus, press to cancel an
operation, back up to the previous menu,
or exit the menu display.
Speaker
Sound Select
Press to activate handset speakerphone. Press again to switch call back
to earpiece.
Press to customize speaker sound for
clear speakerphone conversations.
Main menu
Intercom
Directory
Calls Log
Pictures
See page 13
See page 18
See page 22
See page 14
Sounds & Alerts menu
Vibrate
Ringer Control
Low Batt Tone Keypad Tone
Sounds&Alerts
See page 15
Settings
See page 16
Settings menu
Ringers
Clock On/Off
Set Time
Contrast
Range Tone
Phone Setup
Language
Reset Settings
2
ATT-5860CIB-d2.qxd
1/3/2004
11:08 AM
Page 3
Getting Started
Quick reference guide
Base/Speakerphone
Swivel antenna fully
upright for best results
Answering
system
controls
Telephone
function keys
Telephone function keys (see pages 11-13)
REDIAL MENU
MEM
SOFTKEYS ............Press to select menu item displayed just above the key
CLEAR ....................Press to cancel an operation, back up to the
previous menu, or exit the menu display
INTERCOM ............Press to transfer a call or initiate an intercom conversation
FLASH ....................During a call, press to receive an incoming call, if
Call Waiting is activated
VOLUME ................Press to adjust speakerphone listening volume
MUTE ......................Press to silence microphone; press again to resume
SPEAKERPHONE....Press to turn speakerphone on or off (answer or end a call)
Answering system controls (see pages 35-43)
Press to repeat message.
Press twice to hear
previous message.
Press to skip to next
message.
Press to play or stop playing messages
ON/OFF ..................Press to turn answering system on or off
DELETE ..................Press to delete message currently playing
TIME SET................Press to set the answering system clock
MENU......................Press to review or change answering system options
CHANGE ................Press to change a menu option
RECORD ................Press to record a memo or outgoing announcement
3
ATT-5860CIB-d2.qxd
1/3/2004
11:08 AM
Page 4
Getting Started
Parts checklist
Remember to save your sales receipt and original packaging in case you ever need to
ship your telephone for warranty service. Check to make sure the telephone package
includes the following:
Wall mount bracket
Telephone base
Power
adapter
Long telephone line cord
Telephone
handset
Short telephone line cord
Batteries
Belt clip
Battery compartment cover
4
ATT-5860CIB-d2.qxd
1/3/2004
11:08 AM
Page 5
Getting Started
Before you begin
About Caller Identification
Telephone operating range
Caller ID with Call Waiting features in
this telephone let you see who’s calling
before you answer the phone, even
when you’re on another call. These
features require services provided by
your local telephone company.
This cordless telephone operates with
the maximum power allowed by the
Federal Communications Commission
(FCC). Even so, this handset and base
can communicate over only a certain
distance — which can vary with the
locations of the base and handset, the
weather, and the construction of your
home or office. For best performance,
keep the base antenna fully upright.
Contact your telephone service
provider if:
• You have both Caller ID and Call
Waiting, but as separate services
(you may need combined service)
If you receive a call while you are
out of range, the handset might not
ring — or if it does ring, the call might
not connect when you press PHONE.
Move closer to the base, then press
PHONE to answer the call.
• You have only Caller ID service, or
only Call Waiting service
• You don’t subscribe to any Caller
ID or Call Waiting services.
If you move out of range during a
phone conversation, you might hear
noise or interference. To improve
reception, move closer to the base.
You can use this phone with regular
Caller ID service, and you can use its
other features without subscribing to
either Caller ID or combined Caller ID
with Call Waiting service. There may
be fees for these services, and they
may not be available in all areas.
If you move out of range without
pressing OFF, your phone will be left
“off the hook.” To hang up properly,
walk back toward the telephone base,
periodically pressing OFF until the call
is disconnected.
Caller ID features will work only if
both you and the caller are in areas
offering Caller ID service, and if both
telephone companies use compatible
equipment.
See Caller ID Operation, beginning on
page 22, for more details about how
these features work.
5
ATT-5860CIB-d2.qxd
1/3/2004
11:08 AM
Page 6
Getting Started
Telephone base installation
Install the speakerphone base as shown below. Choose a location away from electronic equipment, such as personal computers, television sets or microwave ovens. Avoid
excessive heat, cold, dust or moisture.
NOTE: Use only the power
cord supplied with this product.
If you need a replacement, call
1 800 222–3111.
Be sure to use an electrical outlet
not controlled by a wall switch.
Plug power cord
transformer into
electrical outlet
Route cords through
slot in base
6
Plug long telephone
line cord into
telephone jack
ATT-5860CIB-d2.qxd
1/3/2004
11:09 AM
Page 7
Getting Started
Battery installation & charging
After installation, place the handset in the base and allow batteries to charge for 12
hours before use. You can keep batteries charged by returning the handset to the base
after each use. When battery power is fully depleted, a full recharge takes about 8 hours.
1
LOW BATTERY
REDIAL
2:10 PM CID LOG
Low battery indicator
Return handset to base to recharge
when this symbol flashes. (Handset
will beep when battery is low.)
Press coin into slot on
base of handset to
release latch, then
remove battery cover
Insert supplied
batteries
Caution: Use only AT&T 2AA
NiCad or NiMH rechargeable
batteries. Do not use AA
alkaline batteries.
Place handset in base to charge
for 12 hours before first use.
Rotate antenna to fully upright
position
To replace battery cover
Insert top
tab first
Press down to
click in place
DID
DIDYOU
YOUKNOW?
KNOW?
Optional
Optionalspare
sparebatteries
batteriescan
canbe
bekept
keptcharged
chargedinin
the
base,
for
quick
replacement
when
the base, for quick replacement whenhandset
handset
batteries
42).
batteriesbecome
becomedepleted
depleted(see
(seepage
page47
7
ATT-5860CIB-d2.qxd
1/3/2004
11:09 AM
Page 8
Getting Started
Wall mounting
The speakerphone base can be installed on any standard wall-phone outlet as shown
below. Choose a location away from electronic equipment, such as personal computers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture.
Connect cords as shown, then press
and slide down firmly so base is held
securely on outlet mounting pegs
Clip wall-mount bracket
securely into notches on
underside of base
Plug short telephone line
cord into telephone jack
Plug power cord transformer
into electrical outlet
Place handset in base to charge
for 12 hours before first use.
Rotate antenna
to fully upright
position
8
ATT-5860CIB-d2.qxd
1/3/2004
11:09 AM
Page 9
Getting Started
Belt clip & optional headset
Install belt clip as shown below if desired.
For hands-free telephone conversations, you can use any industry standard 2.5 mm
headset (purchased separately). For best results use an AT&T 2.5 mm headset.
Snap belt clip into notches on
side of handset. Rotate and pull
to remove.
Plug 2.5 mm headset
into jack on side of
handset (beneath
small rubber cap)
9
ATT-5860CIB-d2.qxd
1/3/2004
11:09 AM
Page 10
Telephone Operation
Basic handset operation
Making and answering calls
To answer a call, press PHONE or any dial pad key. To
make a call, press PHONE, then dial a number. Press
OFF to hang up.
To preview numbers before dialing, enter numbers first,
then press PHONE to dial. Press the left NavKey to
make corrections as you are entering numbers. Press
PAUSE to add a 3-second dialing pause.
Hands-free speakerphone calls
To answer an incoming call, press SPEAKER. To make a
call, press SPEAKER, then dial a number. During a call
you can press SPEAKER to toggle between hands-free
speakerphone and normal handset use. Press OFF to
hang up.
1
REDIAL
2:10 PM CID LOG
Last number redial
1
H
CALL ON HOLD
HOLD
2:10 PM
MUTE
Press REDIAL to display a list of numbers recently called.
Use the NavKey control to select a number, then press
PHONE to dial (see page 26 to delete the number, or
copy it to your phonebook).
Hold and mute
Press HOLD to place a call on hold. Press PHONE to
resume the call.
Press NavKey
1 Transfer Call
BASE
HANDSET 2
HANDSET 3
Press MUTE to silence the microphone. You will be able
to hear, but your caller will not be able to hear you
until you press MUTE again to resume speaking.
Call transfer
During a conversation you can transfer the call to the
base speakerphone (or to another handset if you have
more than one registered).
Press the middle NavKey button to display a list of sets.
Press NavKey buttons to highlight the set you want, then
press the middle NavKey button to transfer the call.
The call will be placed on hold. You can then press PHONE
(or SPEAKERPHONE at the base) to resume speaking.
10
ATT-5860CIB-d2.qxd
1/3/2004
11:09 AM
Page 11
Telephone Operation
Basic base operation
Answering calls
Volume
Speakerphone
To answer an incoming intercom page or external call,
press SPEAKERPHONE. Press SPEAKERPHONE again to
hang up.
Hold and mute
Press HOLD to place a call on hold. Press SPEAKERPHONE to resume the call.
Press MUTE to silence the microphone. You will be able
to hear, but your caller will not be able to hear you
until you press MUTE again to resume speaking.
CALL ON
HOLD
XFER
HOLD
MUTE
Call transfer
During a conversation you can transfer the call to a
handset.
PHONE ON
XFER
HOLD
MUTE
Press XFER to display a list of registered handsets. Use
arrow buttons to highlight the set you want, then press
OK to transfer the call.
The call will be placed on hold. You can then press
PHONE or SPEAKER at the handset to resume speaking.
HANDSET 1
HANDSET 2
HANDSET 3
^
OK
V
11
ATT-5860CIB-d2.qxd
1/3/2004
11:09 AM
Page 12
Telephone Operation
Options while on calls
To adjust volume or sound quality
Volume
Flash
Silence ringer
Tone
Press VOLUME buttons on the handset or the base to
adjust listening volume. Each button press raises or
lowers volume by one level.
During a handset call you can press SOUND SELECT to
change sound quality. You can choose Natural Audio,
Bass Boost, Mid Boost or Treble Boost. Each button
press changes to the next tone type.
Sound quality
Call waiting
Flash
If you have Call Waiting service, you will hear a beep if
someone calls while you are already on a call. Press
FLASH to put your current call on hold and take the new
call. You can press FLASH at any time to switch back
and forth between calls.
Volume
Mute
Ring silencing
Press OFF while the handset is ringing (or MUTE while
the base is ringing) to silence the ringer. You can still
answer, or let the caller leave a message.
3-way conference calls
During an outside call, you can use both the handset and
base (or two local handsets) to allow a 3-way
conversation.
While a call is in progress, others can press PHONE (or
SPEAKERPHONE at the base) to join the conference call.
Others can press OFF (or SPEAKERPHONE at the base)
to drop out of the conference call, but the call will not
be terminated until all sets hang up.
Temporary tone dialing
If you have dial pulse (rotary) service, you can switch to
touch tone dialing during a call by pressing *. This
can be useful if you need to send tone signals for access
to answering systems or long-distance services.
12
ATT-5860CIB-d2.qxd
1/3/2004
11:10 AM
Page 13
Telephone Operation
Intercom calls
Intercom calls
The intercom allows conversation between the handset
and base, or between handsets if you have registered
additional handsets for use with your system.
Display menu
1 Intercom
Select Intercom
Use the NavKeys to select INTERCOM at the handset,
or press the INTERCOM button on the base.
Press the INTERCOM button at a handset or at the base.
Scroll down to select a station, or select GLOBAL PAGE
to page all stations. Press the middle NavKey button (or
OK at the base) to page the selected station.
At a handset, press PHONE to answer an intercom page.
At the base, the phone will ring once, then answer the
intercom page automatically.
1 Intercom Call
Base
GLOBAL PAGE
When your intercom call is finished, press OFF at the
handset (or INTERCOM at the base) to end the call.
Press base Intercom button
Handling incoming calls
The phone will beep if you receive an outside call during
an intercom conversation.
• At the handset, press PHONE to terminate the
intercom call and answer the incoming call.
• At the base, press INTERCOM to terminate the
intercom call, then press SPEAKERPHONE to
answer the incoming call.
HANDSET 1
GLOBAL PAGE
^
OK
V
To allow the outside caller to join your intercom
call, press SPEAKERPHONE without terminating the
intercom call.
13
ATT-5860CIB-d2.qxd
1/3/2004
11:10 AM
Page 14
Telephone Operation
Display menu
Handset screen images
1 Intercom
This feature allows you to select an image or design as
“wallpaper” to be displayed in the background of your
handset display screen.
Select Pictures
1 Pictures
Choose category
1 Pictures
Images
Emotions
Clear Wallpaper
Press the middle NavKey button to display the menu,
use navigation buttons to highlight PICTURES, then
press the middle button again to select this option.
Choose a category (Images or Emotions), then use the
NavKey buttons to display the available graphics. Press
SET to select an image.
To remove an image from your screen, use the NavKey
buttons to select CLEAR WALLPAPER, then press the
middle NavKey button.
Browse images
1 Images
SET
1 of 16
Press SET to select
desired image
14
ATT-5860CIB-d2.qxd
1/3/2004
11:11 AM
Page 15
Telephone Operation
Select Sounds&Alerts
1 Sounds & Alerts
Handset sounds & alerts
Note: After selecting any option below, press the
middle Navkey button to confirm your choice.
1 Vibrate
Options: On/Off
1 Ringer Control
Vibrate (silent call alerting)
When on, the phone vibrates to signal an incoming call
or intercom page. This can be useful in situations where
ring tones are undesirable, or in noisy environments
where ringing may not be heard. Changing the Vibrate
setting does not affect the ringer.
Ringer control
Volume Level: 1 to 5
Ringer: On/Off
1 Ringers
Choose 1 of 14 ringer types
At this menu you can set a default ring volume level (15), or turn the ringer off.
Ringers
This feature allows you to customize the incoming call
alerter. The menu includes options for 8 ringer styles
and 6 musical passages. You will hear an example of
each ringing type as you scroll through the choices.
1 Low Batt Tone
Low battery tone
Options: On/Off
The handset is factory programmed to alert you with a
tone when the battery is low and needs recharging. You
can turn this alert on or off at this menu.
1 Keypad Tone
Keypad tone
Options: On/Off
The handset is factory programmed to beep at each
keypress. You can turn the keypad tones on or off at
this menu.
1 Range Tone
Out-of-range tone
Options: On/Off
The handset is factory programmed to alert you with a
tone when the handset is too far from the base, to
remind you to move closer. You can turn this alert on
or off at this menu.
15
ATT-5860CIB-d2.qxd
1/3/2004
11:12 AM
Page 16
Telephone Operation
Select Settings
1 Settings
Handset settings
Note: After selecting any option below, press the
middle Navkey button to confirm your choice.
1 Clock On/Off
Clock On/Off
At this menu you can choose to turn the handset time
display on or off.
Turn clock display on/off
1 Set Time
Set time
Set time
Select this menu to set the time displayed on screen.
You must enter four digits (09:23). Using the NavKey,
press the DOWN button, then use LEFT/RIGHT buttons
to set AM or PM. After you set the handset time once,
it will thereafter be set automatically with incoming
Caller ID information if you have this service (see page 5).
1 Contrast
Contrast
Adjust screen contrast
1 Phone Setup
Enter base ID to register handset
Choose Tone or Pulse dialing
1 Language
Choose screen display language
1 Reset Settings
Clear phonebook
Restore factory default settings
At this menu you can adjust screen contrast to one of
eight levels to maximize readability in different lighting
conditions.
Phone setup
Choose this option to register a new handset or select
dialing mode. To register, you must enter the 15-digit
ID number of the base. (To find this number, go to the
base, press MENU, scroll down to select DISPLAY BASE
ID, then press OK.)
The phone is preset at the factory to use TONE dialing.
You should change it to PULSE only if you do not have
touch-tone dialing service.
Language
At this menu you can select the language used in all
menus and screen displays. Choices are English,
Español, Français.
Reset Settings
At this menu you can delete all entries from your handset phonebook, or restore all factory default settings.
16
ATT-5860CIB-d2.qxd
1/3/2004
11:12 AM
Page 17
Telephone Operation
8 NEW CALLS
REDIAL
MENU
MEM
Base settings
Note: After selecting any option below, press the
middle Navkey button to confirm your choice.
Ringer volume
CALLS LOG
BASE SETTINGS
DISPLAY BASE-ID
^
OK
At this menu you can set a default ring volume level
(1-6), or turn off the ringer.
V
Ringer melody
RINGER VOLUME
RINGER MELODY
NUMBER ANNOUNCE
KEYPAD TONE
^
OK
V
Set ringer volume (levels 1-6/Off)
RINGER VOLUME
RINGER MELODY
NUMBER ANNOUNCE
KEYPAD TONE
^
OK
V
This feature allows you to customize the incoming call
alerter. The menu includes options for 8 ringing styles.
You will hear an example of each ringing style as you
scroll through the choices.
Number announce
If you have Caller ID service, you will hear a caller’s
telephone number spoken after the first ring. You can
turn this feature on or off at this menu.
Set ringing style (8 choices)
RINGER VOLUME
RINGER MELODY
NUMBER ANNOUNCE
KEYPAD TONE
^
OK
V
Keypad tone
The handset is factory programmed to beep at each
keypress. You can turn the keypad tones on or off at
this menu.
Options: on/off
Tone/pulse
KEYPAD TONE
TONE/PULSE
CONTRAST
LANGUAGE
^
OK
Factory default setting is TONE. Change this to PULSE
only if you do not have touch-tone dialing service.
V
Options: tone/pulse dialing
At this menu you can adjust screen contrast to one of
16 levels to maximize readability in different lighting
conditions.
KEYPAD TONE
TONE/PULSE
CONTRAST
LANGUAGE
^
OK
V
Set contrast (levels 1-16)
OK
Language
At this menu you can select the language used in all
menus and screen displays. Choices are English, Spanish,
French.
KEYPAD TONE
TONE/PULSE
CONTRAST
LANGUAGE
^
Contrast
V
Options: English/Spanish/French
17
ATT-5860CIB-d2.qxd
1/3/2004
11:13 AM
Page 18
Phonebook
1 Directory
Memory capacity
The handset phonebook can store up to 50 entries.
Each entry can contain a number up to 32 digits, and a
name up to 16 letters long.
If you subscribe to Caller ID service from your local
telephone company, you can select a picture to be
displayed with each phonebook entry. You can also
select a distinctive ringing type for each entry, so you
know who is calling. A convenient search feature can
help you find and dial numbers quickly (see page 20).
Timeouts and error tones
If you pause for too long while making an entry the
Phonebook will time out and you will have to begin
again.
If all memory locations are in use, an error tone will
sound when you attempt to enter a new number. This
means the memory is full, and you will not be able to
store a new number until you delete an existing one.
18
ATT-5860CIB-d2.qxd
1/3/2004
11:13 AM
Page 19
Phonebook
Select Directory
New phonebook entries
1 Directory
Alice
Bob
Chris
Deborah
FIND
1 of 37
To enter a name
NEW
1 Directory
Enter Name
Pat Johnson
Press dial pad buttons once for the first letter, twice for
the second, three times for the third. Continue for
lower-case letters. To enter a number, continue
pressing the button until the number appears.
Press once to enter “A” (4 times for “a”)
OK
<—
1 Directory
Enter Number
1235556789
OK
<—
Press twice to enter “B” (5 times for “b”)
2
Press 3 times to enter “C” (6 times for “c”)
Press 7 times to enter “2”
The cursor moves to the right when you press another
dial pad button or the RIGHT NavKey button (press
twice to enter a space). When the name is complete,
press OK.
Pat Johnson
123-555-6789
Ringer:
< Default >
• Press the <-- button to erase letters if you make a
mistake.
Picture:
• Press 1 repeatedly to enter an ampersand (&),
apostrophe ('), comma (,), period (.), or numeral (1).
SAVE
< [none] >
<—
Press SAVE to complete entry,
or down NavKey to customize
entry with ringer or picture
Pat Johnson
123-555-6789
Ringer:
< Melody 1>
Picture:
SAVE
< [none] >
<—
To enter a number
Use the dial pad to enter up to 32 digits. When the
number is complete, press OK.
• Press the <-- button to erase numbers if you make a
mistake.
• To enter a 3-second dialing pause, press and hold
# until “P” appears.
Customizing entries
Pat Johnson
123-555-6789
Ringer:
Melody 1
Picture:
SAVE
<—
Pat Johnson
123-555-6789
Ringer:
Melody 1
Picture:
EDIT
NEW
Press the DOWN NavKey button, then LEFT or RIGHT
to choose a distinctive RINGER (see page 15). If you
have Caller ID service, the ringer you assign will alert
you when this person calls.
Press the DOWN NavKey button, then LEFT or RIGHT
to insert a PICTURE into this entry (see page 14).
Press SAVE to save your new entry (or press CANCEL
to discard changes and exit).
19
ATT-5860CIB-d2.qxd
1/3/2004
11:13 AM
Page 20
Phonebook
Select Directory
Phonebook search
1 Directory
You can use the NavKey buttons to browse through
the phonebook, or search to find a specific entry. You
can press CANCEL at any time to exit the directory.
1 Directory
Alice
Bob
Chris
Deborah
FIND
To browse through the directory
NEW
1 of 37
To search alphabetically
5
1 Directory
Search For
J
OK
<—
8 of 37
To shorten your search, press FIND, then use the telephone dial pad to enter the first letter of a name. When
you press OK, the first name beginning with that letter
will be displayed.
Press dial pad buttons once for the first letter, twice for
the second, three times for the third, as shown on the
previous page.
1 Directory
Jack
Jennifer
John
Kristen
FIND
To browse, press UP or DOWN NavKey buttons to
scroll through all entries one by one.
NEW
For example, press 5 (JKL) once to find Jack, twice to
find Kristen, or three times to find Linda.
To call a displayed number
Jack
123-555-4321
Ringer:
< Default >
When you find the entry you want, press PHONE (or
SPEAKER) to dial.
Picture:
To modify the entry, press the middle NavKey button,
then select EDIT (see next page).
EDIT
< [none] >
8 of 37
DELETE
20
ATT-5860CIB-d2.qxd
1/3/2004
11:13 AM
Page 21
Phonebook
Select Directory
To dial, edit or delete entries
1 Directory
To edit a listing
When any phonebook entry is displayed, press EDIT to
modify the entry. You can change the name, number,
distinct ringer setting or picture by following the steps
on page 19.
1 Directory
Alice
Bob
Chris
Deborah
FIND
1 of 37
To dial a number
NEW
To delete an entry
ALICE
555-4321
Ringer:
Melody 1
Picture:
EDIT
Press PHONE (or SPEAKER) to dial the displayed number.
1 of 37
DELETE
Press DELETE to delete the displayed entry from the
phonebook. Press YES to confirm. Press NO to return
to previous display. Once deleted an entry cannot be
recovered.
Press PHONE to dial entry
ALICE
555-4321
Ringer:
Melody 1
Picture:
EDIT
1 of 37
DELETE
Press EDIT to change entry
ALICE
555-4321
Ringer:
Melody 1
Picture:
EDIT
1 of 37
DELETE
Press DELETE to delete entry
Are you sure?
YES
NO
Press YES to confirm
21
ATT-5860CIB-d2.qxd
1/3/2004
11:14 AM
Page 22
Handset Calls Log
The Calls Log keeps track of calls you’ve made and
received, and even lets you check voice messages from
your handset.
1 Calls Log
Use the NavKey controls to select Calls Log, then
make a selection from the list displayed:
Review Messages (see next page)
Play or delete voice messages.
Review CID Log (see page 24)
Select Calls Log
1 Calls Log
If you have Caller ID service, you can review the CID
Log to find out who has called, return the call without
dialing, or transfer the caller’s name and number into
your phone directory.
Clear CID Log (see page 24)
1 Calls Log
Review Messages
Review CID Log
Clear CID Log
Review Redial
Clear Redial
Use this command to delete all entries in your Caller
ID Log.
Review Redial (see page 26)
This screen shows a list of the most recent 10 numbers
you’ve dialed. You can redial any number, delete it from
the redial log, or copy it to your phonebook.
Clear Redial (see page 26)
Use this command to delete all recently called numbers
from your Redial list.
22
ATT-5860CIB-d2.qxd
1/3/2004
11:14 AM
Page 23
Handset Calls Log
Select Calls Log
Review voice messages
1 Calls Log
At this menu you can use your handset to hear your
memos, or voice messages callers have left in your base
answering system (see pages 35-43).
Playback options
1 Calls Log
At the Messages screen, use the NavKey to control
message playback:
Review Messages
Review CID Log
Clear CID Log
Review Redial
Clear Redial
• Press the LEFT NavKey to repeat the message currently playing. Press twice to hear previous message.
• Press the RIGHT NavKey to skip forward to the next
message.
1 Messages
EXIT
2:10 PM DELETE
Delete
Exit
Repeat
Skip
At the handset, voice messages are played through the
speakerphone. If you prefer to listen privately, you can
press SPEAKER to switch to earpiece playback.
To delete a message, press DELETE while the message
is playing.
Press EXIT to halt playback and exit the Messages menu.
Announcements
The screen alerts you when
you have new messages.
Press MSGS to hear them.
NEW MESSAGES
MSGS
2:10 PM
• When playback begins, you will hear the total
number of messages.
• Before each message, you will hear the day and time
it was received.
• After the last message, you will hear “End of
messages.”
CID LOG
23
ATT-5860CIB-d2.qxd
1/3/2004
11:14 AM
Page 24
Handset Calls Log
Select Calls Log
To review your call log
1 Calls Log
How Caller ID works
If you subscribe to Caller ID service, information about
each caller will be displayed after the first ring.
You can review the log to find out who has called,
return the call without dialing, or transfer the caller’s
name and number into your phonebook.
1 Calls Log
Review Messages
Review CID Log
Clear CID Log
Review Redial
Clear Redial
Chris Thompson
123-555-6789
11:29 AM Oct. 20
SAVE
1 of 32
DELETE
Save entry in
phonebook
Delete entry
Display previous entry
The call log can store up to 50 entries. Calls are displayed in reverse order (most recent first). When the
log is full, the oldest entry is deleted to make room for
new incoming call information.
If you answer a call before the information appears on
the screen, it will not be saved in your call log.
Names of callers are displayed only if the information is
provided by your local telephone company. If the telephone number of the person calling matches a number
in your phonebook, the name shown on screen will
match the name you entered into your phonebook.
(Example: If "Christine Smith" calls, her name will
appear as "Chris" if this is how you entered it.)
To review your Caller ID log
Display next entry
The most recent call is displayed first. Use the NavKey
buttons to scroll through the list as shown at left.
To return a call
Press PHONE (or SPEAKER) to call the person currently
displayed (see page 25 for important dialing options).
To save or delete an entry
1 Calls Log
Review Messages
Review CID Log
Clear CID Log
Review Redial
Clear Redial
Press SAVE to copy the displayed information into your
phonebook (see page 19). Press DELETE to delete this
entry from your CID log.
To delete all entries
To clear the Caller ID log of all entries, return to the
Calls Log menu, then use the NavKey controls to scroll
down and select CLEAR CID LOG. To confirm, press YES.
24
ATT-5860CIB-d2.qxd
1/3/2004
11:14 AM
Page 25
Handset Calls Log
Chris Thompson
123-555-6789
11:29 A Oct 20
SAVE
1 of 32
To dial a call log entry
DELETE
Dialing options
Chris Thompson
123-555-6789
11:29 A Oct 20
SAVE
1 of 32
When any Caller ID screen is displayed, press PHONE
(or SPEAKER) to dial the number exactly as it appears
on the screen.
DELETE
1 Dial Options
555-6789
1-555-6789
123-555-6789
1-123-555-6789
Caller ID numbers may appear with an area code that
may not be required for local calls. If the number
displayed is not in the correct format, you can change
how it is dialed.
Press the middle NavKey button to see a list of dialing
options. Press the UP or DOWN NavKey buttons to
select the option you want. To dial it, press the middle
NavKey button again.
Select desired option,
then press to dial
25
ATT-5860CIB-d2.qxd
1/3/2004
11:14 AM
Page 26
Handset Calls Log
Select Calls Log
To review your redial log
1 Calls Log
About the redial memory
You can review the redial log to see what numbers
you’ve recently called, redial, or copy the number into
your phonebook.
The handset remembers the last 10 numbers you call.
Each time you make a call the oldest entry is deleted to
make room for a new one.
1 Calls Log
Review Messages
Review CID Log
Clear CID Log
Review Redial
Clear Redial
To review your redial log
1 Redial
The most recent call is displayed first. Use the
UP/DOWN NavKey buttons to scroll through the list as
shown at left.
123-555-6789
555-1234
123-555-4321
555-4321
SAVE
1 of 10
DELETE
To redial a call
Save entry in
phonebook
Delete entry
Press PHONE (or SPEAKER) to redial the number
currently displayed.
Display previous entry
To save or delete an entry
Press SAVE to copy the highlighted number into your
phonebook (see page 19).
Display next entry
1 Calls Log
Review Messages
Review CID Log
Clear CID Log
Review Redial
Clear Redial
Press DELETE to delete this entry from your redial log.
To delete all entries
To clear the redial log of all entries, return to the Calls
Log menu, then use the DOWN NavKey button to scroll
down and select CLEAR REDIAL. To confirm, press YES.
26
ATT-5860CIB-d2.qxd
1/3/2004
11:14 AM
Page 27
Base Calls Log
How Caller ID works
If you subscribe to Caller ID service, information about
each caller will be displayed after the first ring.
32 NEW CALLS
MENU
The call log can store up to 50 entries. Calls are displayed in reverse order (most recent first). When the
log is full, the oldest entry is deleted to make room for
new incoming call information.
CALLS LOG
BASE SETTINGS
DISPLAY BASE-ID
^
OK
Display calls log
You can review the log to find out who has called,
return the call without dialing, or transfer the caller’s
name and number into your phonebook.
V
If you answer a call before the information appears on
the screen, it will not be saved in your call log.
Names of callers are displayed only if the information is
provided by your local telephone company. If the telephone number of the person calling matches a number
in your phonebook, the name shown on screen will
match the name you entered into your phonebook.
(Example: If "Christine Smith" calls, her name will
appear as "Chris" if this is how you entered it.)
27
ATT-5860CIB-d2.qxd
1/3/2004
11:15 AM
Page 28
Base Calls Log
32 NEW CALLS
MENU
To review your call log
To review your call log
The most recent call is displayed first. Use the arrow
buttons to scroll through the list as shown at left.
CALLS LOG
BASE SETTINGS
DISPLAY BASE-ID
^
OK
To return a call
V
Chris Thompson
123-555-6789
11:29 A Oct 20 #01
^
CID
Display
previous
entry
V
Press SPEAKERPHONE to call the person currently
displayed (see page 29 for important dialing options).
To delete an entry
Press DEL to choose an option. Select THIS to delete
the entry displayed, or ALL to clear the Caller ID log of
all entries (to confirm, press YES).
Display
next
entry
Chris Thompson
123-555-6789
11:29 A Oct 20 #01
DEL
OPT #
Delete entry
(or all entries)
Choose dialing
options
28
ATT-5860CIB-d2.qxd
1/3/2004
11:15 AM
Page 29
Base Calls Log
Chris Thompson
123-555-6789
11:29 A Oct 20 #01
^
CID
V
Chris Thompson
123-555-6789
11:29 A Oct 20 #01
DEL
DIAL
When any Caller ID screen is displayed, press
SPEAKERPHONE to dial the number exactly as it
appears on the screen.
Dialing options
Caller ID numbers may appear with an area code that
may not be required for local calls. If the number
displayed is not in the correct format, you can change
how it is dialed.
OPT #
555-6789
1-555-6789
123-555-6789
1-123-555-6789
^
To dial a call log entry
Select CID, then OPT # to see a list of dialing options.
Press V or ^ to highlight the option you want, then
press DIAL.
V
Select desired option,
then press to dial
29
ATT-5860CIB-d2.qxd
1/3/2004
14
11:15 AM
Page 30
Answering System
Operation
Message capacity
Message counter
Number of messages waiting
(or, during playback, message
number currently playing)
The answering system can record up to 99
messages, depending on how long each message is.
Individual messages can be up to 4 minutes long, but
total maximum recording time is 25 minutes. Messages
will remain available for replay until you delete them.
Handset access
In addition to the features described in this section, you
can also use your handset to review or delete messages
(see page 23).
Press to start or stop message
playback (see page 35)
Press to turn answering
system on or off
Press to delete message
(see page 35)
Press to repeat message;
hold to slow playback
(see page 35)
Press to skip message;
hold to speed up playback
(see page 35)
Press to set clock
(see page 31)
Press to record memo (see page 36)
or outgoing announcement (page 32)
Press repeatedly to hear
feature options (see page 34)
Press to select or change a
feature option (see page 34)
30
ATT-5860CIB-d2.qxd
1/3/2004
11:15 AM
Page 31
Answering System Operation
Day and time announcements
To set day and time
Before playing each message, the answering system
announces the day and time the message was received.
1
TIME SET
“Friday, 10:07 am, 2003”
“To change clock,
press Time Set”
2
TIME SET
“Friday”
3
The system uses voice prompts to guide you. Each time
you press CHANGE, the day, hour, minute or year
advances by one. When you hear the correct setting,
press TIME SET to move to the next setting.
CHANGE
To check day and time
“Monday”
You can press TIME SET at any time to hear the
current day and time without changing it.
Press until correct day is spoken
4
Before using the answering system, you should follow
the steps at left to set the day and time, so messages
are dated correctly.
TIME SET
“10 am”
5
CHANGE
NOTE: Press and hold CHANGE to advance the minute or year by 10.
“2 pm”
Press until correct hour is spoken
6
TIME SET
“07”
7
CHANGE
“26”
Press until correct minute is spoken
8
TIME SET
“2003”
9
@CHANGE
“2004”
Press until correct year is spoken
10
@TIME SET
“Monday, 2:26 pm, 2004”
31
ATT-5860CIB-d2.qxd
1/3/2004
11:15 AM
Page 32
Answering System Operation
12
Outgoing announcements
Outgoing announcements are the messages callers hear
when calls are answered by the answering system.
Elapsed
recording time
(seconds)
1
Press to stop
recording
MENU
To record your outgoing announcement
“Change
announcement”
Press MENU until you hear “Change announcement.”
Then press RECORD and begin speaking after you hear
“Now recording.” Speak facing the telephone base from
about 9 inches away.
2
(Play/Stop)
(Plays announcement
previously recorded)
Or
2
Elapsed time (in seconds) will be shown in the message
window as you record. You can record an announcement up to 90 seconds long. Announcements less than 3
seconds long will not be recorded.
RECORD
“Now recording...”
3
The phone is pre-programmed with an announcement
that answers calls with “Hello. Please leave a message
after the tone.” You can use this announcement, or
replace it with a recording of your own voice.
Speak into microphone
To delete your outgoing announcement
Press MENU until you hear “Change announcement,”
then press PLAY/STOP to begin playback. Press DELETE
during playback to delete your announcement.
When your announcement is deleted, calls will be
answered with the pre-programmed announcement
described above.
Microphone
4
(Play/Stop)
(Announcement is
played back)
32
ATT-5860CIB-d2.qxd
1/3/2004
11:15 AM
Page 33
Answering System Operation
Announce Only mode
A
“A” is displayed when Announce
Only is activated
In Announce Only mode, callers hear an announcement
but cannot leave messages. This option is useful, for
example, to notify callers that you will be away for an
extended period and request that they call back after a
certain date.
1
MENU
To turn Announce Only on or off
“Change
Announce Only”
“Off”
Press MENU repeatedly until you hear “Change
Announce Only.” Then press CHANGE until you hear
the option you want (On or Off). Press PLAY/STOP to
store your selection and exit, or press MENU again to
modify other features (see page 34).
CHANGE
To record your outgoing announcement
“On”
When Announce Only is turned on, calls are answered
with a pre-recorded announcement that says “We’re
sorry, messages to this number cannot be accepted.”
You can use this announcement, or replace it with a
recording of your own voice.
2
3
4
CHANGE
(Play/Stop)
Beep
(Option selected)
After turning on the Announce Only feature, follow the
steps on page 32 to record your announcement. Callers
will hear this announcement only when the Announce
Only feature is turned on. Otherwise they will hear the
standard announcement asking them to leave a message.
33
ATT-5860CIB-d2.qxd
1/3/2004
11:15 AM
Page 34
Answering System Operation
Changing feature options
Menu features can be changed to customize how the
answering system operates. Press MENU repeatedly to
hear each feature. Press CHANGE when you hear the
feature you want to modify.
1
MENU
Press until desired feature
is heard (see list at right)
2
CHANGE
Press until desired selection
is heard
3
MENU
Press to set selection and
move to next menu option
Or
(Play/Stop)
Press to set selection and
exit menu
Feature options
(Default settings underlined)
System announces:
Feature description:
“Change Announcement”
Options: [record announcement]
Record your outgoing announcement
(see page 32).
“Change remote access code”
Options: [enter 2-digit code] 19
Enter a 2-digit number (10-99) for remote
access from another phone (see page 38).
“Change message alert”
Options: On / Off
When on, the telephone beeps every 10
seconds when you have new messages.
“Change announce only”
Options: On / Off
When on, callers hear an announcement
but cannot leave messages (see page 33).
“Change call screening”
Options: On / Off
When on, you can hear callers leave
messages, or answer the call.
“Change number of rings”
Options: 2 / 4 / 6 /Toll Saver
Choose number of rings before the system
answers a call. When Toll Saver is active,
the system answers after 2 rings if you
have new messages, and after 4 rings if
you have no new messages.
NOTE: Press and hold CHANGE to advance the remote access code
number by 10.
34
ATT-5860CIB-d2.qxd
1/3/2004
11:15 AM
Page 35
Answering System Operation
Number of messages waiting
(or, during playback, message
number currently playing)
14
Message playback
Press PLAY/STOP to hear messages. The system
announces the number of messages, then begins playback.
If you have new messages waiting, you will hear only the
new messages (oldest first). If there are no new messages,
the system will play back all messages (oldest first).
Press PLAY/STOP to begin or
end message playback
Announcements
1
• When playback begins, you will hear the total
number of messages.
(Play/Stop)
“You have [xx] new
and [xx] old messages”
Message playback begins. See
options at right.
2
• Before each message, you will hear the day and time
it was received.
• After the last message, you will hear “End of messages.”
If the system has less than 5 minutes of recording
time left, you will hear time remaining.
(Play/Stop)
Message playback ends.
Options during playback
• Press VOLUME button to adjust speaker volume.
• Press SKIP to skip to next message (or hold down to
speed up message playback).
• Press REPEAT to repeat message currently playing.
Press twice to hear previous message. (Hold down
to slow message playback).
NOTE: If “F” is flashing in
the message window, memory is
full. You will have to delete some
messages before new ones can
be received.
NOTE: New (unheard)
messages cannot be deleted.
• Press DELETE to delete message being played back.
• Press PLAY/STOP to stop playback.
To delete all messages
To delete all messages, press and hold DELETE while
the phone is idle (not during a call, or during message
playback).
35
ATT-5860CIB-d2.qxd
1/3/2004
11:16 AM
Page 36
Answering System Operation
12
Elapsed
recording time
(seconds)
Press to stop
recording
Recording and playing memos
Memos are messages you record yourself. They are
saved, played back and deleted exactly like incoming
messages. You can record a memo as a reminder to
yourself, or leave a message for someone else if others
in your household use the answering system.
To record a memo
1
RECORD
“Now recording...”
2
Speak into microphone
Follow the steps at left to record a memo. Elapsed time
(in seconds) are shown in the message window as you
record. You can record a memo up to 4 minutes long.
Memos less than 1 second long will not be recorded.
To play back a memo
Press PLAY/STOP to hear messages and memos (see
page 35 for other options).
Microphone
3
(Play/Stop)
Beep
(Memo has been
recorded)
36
ATT-5860CIB-d2.qxd
1/3/2004
11:16 AM
Page 37
Answering System Operation
Message window displays
12
The message window usually displays the total number of
memos and incoming messages. See list below for
explanation of other displays in this window.
Message window
Message window displays
0
No messages waiting.
1-98
Number of messages/memos, or message
currently playing (see page 35).
10-99
Current Remote Access Code while setting
(see page 34).
1-8
Current volume level while adjusting
1-99 (counting)
Elapsed time while recording a memo (see page 36)
or announcement up to 90 seconds (page 32).
99 (flashing)
Memo recording exceeded maximum time of 99
seconds.
F (flashing)
Memory is full. Messages must be deleted before
new messages can be received.
CL (flashing)
Clock needs to be set (see page 31).
A
Announce Only mode is on (see page 33).
--
System is answering a call, or being accessed
remotely.
-- (flashing)
System is being programmed or initialized.
On (or) OF
Displayed for 1 second when any answering
system setting is turned on or off.
37
ATT-5860CIB-d2.qxd
1/3/2004
11:16 AM
Page 38
Answering System Operation
1
Dial your telephone number from
any touch-tone phone
Remote access
2
When system answers, enter 2digit Remote Access Code (“19”
unless you have changed it)
3
Enter remote commands
(see list at right)
Play messages
Press to hear new messages (if none are
new, all play back).
Hang up to end call and save all
undeleted messages
Repeat or go back
Press to repeat current message. Press
twice (# 4 # 4) to hear previous message.
Skip to next message
Press to skip current message and
advance to next message.
Stop
Press to stop any operation
(stop playback, stop recording).
Delete message
Press during playback to delete current
message.
Review announcement
Press to review current outgoing
announcement.
Record announcement
Press * 7, wait for beep, then begin
speaking. Press # 5 to stop recording and
hear playback of new announcement.
Record memo
Press * 8, wait for beep, then begin
speaking. Press # 5 to stop recording.
Turn system off
Press to turn off answering system.
Incoming calls will no longer be answered.
Turn system on
#0
If off, system will answer after 10 rings. Enter
your access code, then press # 0 to turn on.
Help Menu
Press to hear list of features & commands.
Exit
End remote access call (or hang up).
4
A 2-digit security code is required to access your
answering system from any touch-tone phone. This
code is “19” by default; see page 34 to change it.
#2
#4
#6
#5
#9
#7
*7to begin recording
#5to stop recording
NOTE: If you pause for
more than 10 seconds during
remote access, you will hear a
help menu listing all features &
commands. If you issue no
command for another 20 seconds,
the call will end automatically.
*8to begin recording
#5to stop recording
#0
#1
*0
38
ATT-5860CIB-d2.qxd
1/3/2004
11:16 AM
Page 39
Appendix
Display screen status icons
Handset status icons
Phone in use (external call)
1
Parallel set in use (non-system)
Phone in use (intercom call); flashes when handset is being paged
REDIAL
2:10 PM CID LOG
Battery power level (see below); animated display when charging
Ringer off
Answering system is receiving an incoming call
1
M
H
Phone in use (external or intercom call); 1-8 = handsets, 0 = base
1
Current handset identification.
!
Handset is not yet registered, or searching for base
Microphone is muted
Call is on hold
Base status icons
Spare battery charging
MENU
Ringer off
Battery power levels
Battery fully charged
Approximately half power remaining
Battery power is low; should be recharged soon
(flashing) Battery power is very low and must be recharged
39
ATT-5860CIB-d2.qxd
1/3/2004
11:16 AM
Page 40
Appendix
Alert tones and indicator lights
Alert tones
“Beep-Beep-Beep-Beep-Beep”
(5 quick beeps)
Handset battery is low. Place handset in
base to charge the battery.
Confirmation tone
(“Happy” tone)
Handset registration or programming
command successfully completed.
Out of Range tone (multiple
beeps at 1-second intervals)
The handset is out of range. Move closer
to the base.
“Beeeeeeeeep”
(1 long beep)
Error tone (current operation has been
unsuccessful; try again).
Indicator lights
SPEAKER
On when speakerphone
is in use
ON/OFF
On when answering
system is on.
MUTE
On when base
microphone is muted.
40
(Flashes when call
is on hold)
ATT-5860CIB-d2.qxd
1/3/2004
11:16 AM
Page 41
Appendix
Adding new handsets
Your telephone can accommodate up to 8 cordless handsets. You can add new handsets
(sold separately) at any time. Up to 4 handsets at a time can be used.
Before using a new handset, you must register it with the
base. During registration, you must enter the 15-digit ID
number of the telephone base. To find this number, go to
the base, press MENU, scroll down to select DISPLAY
BASE ID, then press OK.
MENU
Follow the instructions provided with your new handset
to register it for use with your telephone.
CALLS LOG
BASE SETTINGS
DISPLAY BASE-ID
^
OK
V
The handset provided with your telephone is automatically
registered as Handset 1. Additional handsets will be
assigned numbers in the order they are registered (2, 3, 4,
etc.) up to a maximum of eight handsets.
CALLS LOG
BASE SETTINGS
DISPLAY BASE-ID
^
OK
V
Handset 1
Handset 2
123456789012345
OK
41
Handset 3
ATT-5860CIB-d2.qxd
1/3/2004
11:17 AM
Page 42
Appendix
Charging spare batteries
Optional spare batteries (sold separately) can be kept charged in the base, for quick
replacement when handset batteries become depleted.
In the event of a power failure, the charged batteries in the base will allow you to
make and receive calls from the cordless handset for up to 2.5 hours.
Spare batteries require at least 20 hours to reach full charge.
Slide latch left to open battery drawer
Insert spare batteries,
then close drawer
Caution: Use only AT&T AA NiMH
rechargeable batteries. Do not
use AA alkaline batteries.
42
ATT-5860CIB-d2.qxd
1/3/2004
11:17 AM
Page 43
Appendix
In case of difficulty
If you have difficulty with your phone, please try the suggestions below. For Customer
Service, visit our web site at www.telephones.att.com, or call 1 800 222–3111.
Telephone does
not work at all
Phone does not
ring
If you hear
noise or
interference
during a call
•
Make sure batteries are installed and charged correctly (see page 7).
•
Make sure the AC adapter is plugged into an outlet not controlled by
a wall switch.
•
Make sure the telephone line cord is plugged firmly into the base unit
and the modular jack.
•
Make sure the base antenna is fully upright.
•
If you have dial pulse telephone service, make sure the dial mode is
set to dial pulse (see page 17).
•
If these suggestions do not work, unplug the base, remove and reinsert the batteries, then place the handset in the base to re-initialize.
•
Make sure the ringer is on (see page 15).
•
Make sure the telephone line cord and AC adapter are plugged in
properly (see page 6).
•
Make sure the base antenna is fully upright.
•
Move the handset closer to the base.
•
You might have too many extension phones on your telephone line to
allow all of them to ring. Try unplugging some of them.
•
Make sure the base antenna is fully upright.
•
You may be out of range. Move closer to the base.
•
Appliances plugged into the same circuit as the base can cause
interference. Try moving the appliance or base to another outlet.
•
The layout of your home or office might be limiting the operating
range. Try moving the base to another location, preferably on an
upper floor.
•
If the buttons don’t work, try placing the handset in the base for at
least 15 seconds.
•
Disconnect the base from the modular jack and plug in a corded telephone. If calls are still not clear, the problem is probably in your
wiring or local service. Call your local telephone service company.
43
ATT-5860CIB-d2.qxd
1/3/2004
11:17 AM
Page 44
Appendix
In case of difficulty
If you lose a call
after changing
channels
•
You were probably almost out of range. Move closer to the base
before changing channels. Before placing another call, set the handset in the base for at least 15 seconds.
Incomplete
messages
•
If a caller leaves a very long message, part of it may be lost when the
system disconnects the call after 4 minutes.
•
If the caller pauses for more than 7 seconds, the system stops
recording and disconnects the call.
•
If the system’s memory becomes full during a message, the system
stops recording and disconnects the call.
•
Press
•
Make sure that the answering system is on.
•
If Toll Saver is activated, the number of rings changes to 2 when you
have new messages waiting (see page 34).
•
In some cases, the system may be affected by the ringing system
used by the local telephone company.
•
If the memory is full or the system is off, the system will answer after
10 rings.
“CL” flashes in
message window
•
You need to reset the answering system clock (see page 31).
System does
not respond
to remote
commands
•
Make sure to enter your Remote Access Code correctly (see page 38).
•
Make sure you are calling from a touch-tone phone. When you dial a
number, you should hear tones. If you hear clicks, the phone is not a
touch-tone telephone and cannot activate the answering system.
•
The answering system may not detect the Remote Access Code
while your announcement is playing. Try waiting until the announcement is over before entering the code.
•
There may be noise or interference on the phone line you are using.
Press dial-pad buttons firmly.
•
When you record your announcement, make sure you speak in a
normal tone of voice, about 9 inches from the base.
•
Make sure there is no “background” noise (TV, music, etc.) while you
are recording.
Difficulty hearing messages
System does
not answer
after correct
number of rings
Announcement
message is not
clear
^ to increase speaker volume.
44
ATT-5860CIB-d2.qxd
1/3/2004
11:17 AM
Page 45
Appendix
Technical specifications
RF Frequency Band
(Handset to Base)
2400 MHz — 2483.5 MHz
RF Frequency Band
(Base to Handset)
5725 MHz — 5850 MHz
Channels
95
Channel Spacing
864 KHz
Sensitivity
-93 dBm
Base Unit Voltage
(AC Voltage, 60Hz)
96 — 127 Vrms
Base Unit Voltage
(AC Adapter Output)
7 Vdc @1A
Handset Voltage
2.4 Vdc (2 x AA NiMH 1400mAh batteries)
45
ATT-5860CIB-d2.qxd
1/3/2004
11:17 AM
Page 46
Appendix
Index
A
AC adapter, 6
Access code, 34, 38
Alert tones, 40
Answering calls, 10, 11
Answering system, 30
announce only, 33
delete messages, 35, 38
feature options, 34
handset access, 23
outgoing announcement, 32, 38
memos, 36
message window, 37
play messages, 35, 38
remote access, 38
remote access code, 34, 38
Antenna, 7
E
Elapsed time, 32, 36
Ending calls, 10, 11
Error tones, 40
F
Flash (switchhook flash), 12
H
Hands-free use, 10
Headphone, 9
Hold, 10, 11
I
Incoming call log, 24, 28
Incoming calls, answering, 10, 11, 13
Incoming messages, 30
Indicator lights, 40
Intercom, 13
B
Battery charging, 7, 42
Battery installation, 7
Belt clip, 9
L
Last number redial, 26
Low battery, 7
C
Call logs, 22, 27
Caller ID, 5, 24, 28
add entries to phone directory, 24, 28
delete entries, 24, 28
dial entries, 25, 29
Call screening, 34
Call waiting, 5, 12
CID, 24, 28
Conference calls, 12
M
Making calls, 10, 11
Memos, 36
Menus, 2, 14-17
Message alert, 34
Messages, 30-38
Microphone, 32, 36
Missed calls, 24, 28
Mute, 10, 11
D
Day/time, 31
Delete Call Log entries, 24, 28
Delete redial entries, 26
Dialing,
manual dialing, 10, 11
phonebook dialing, 21
Display screen, 39
Distinctive ring, 18
46
ATT-5860CIB-d2.qxd
1/3/2004
11:17 AM
Page 47
Appendix
Index
N
Names,
enter into phonebook, 19
search for, 20
New handsets, 41
Number of rings before answer, 34
S
Search for name, 20
Security codes, 34, 38
Skip, 35
Sounds & alerts, 15, 40
Spare batteries, 42
Speakerphone, 10, 11
O
On/off button, 30
Operating range, 5
Outgoing announcement, 32
Out of range, 5
T
Technical specifications, 45
Time, 31
Timers,
recording announcement, 32
recording memo, 36
Tones,
base tones & alerts, 17
handset tones & alerts, 15
send tones during call, 12
Troubleshooting, 43
P
Paging, 13
Phonebooks,
base phonebook, 22
handset phonebook, 18
dial number, 21
edit entries, 21
name search, 20
new entries, 19
Pictures, 14
Playback (messages), 35
Problems, 43
V
Voice mail, 23, 30
Volume controls, 12
Q
Quick reference guide, 2-3
R
Receiving calls, 10, 11
Recharging, 7, 42
Redial, 26
Repeat, 35
Ring silencing, 12
Ring tone options, 15, 17
47
ATT-5860CIB-d2.qxd
1/3/2004
11:17 AM
Page 48
48
ATT-5860CIB-d2.qxd
1/3/2004
11:17 AM
Page 49
Remote access wallet card
Your package includes a handy wallet card to help you remember access commands
you can use to control your answering system from any touch-tone telephone.
If you misplace this card, just clip and save the card below.
Cut along dotted line
Call your phone number, then enter
your 2-digit access code (preset to 19).
Action
Remote Command
#1
#2
#4
#6
#5
Fold here
Voice help menu ......................
Play messages ............................
Repeat message ........................
Skip message ..............................
Stop..............................................
Save messages............................Hang up
Delete message ........................
while message plays
#9
#7
*7 speak after beep
#5 to stop
Record memo............................*8 speak after prompt
#5 to stop
End remote access call ............*0 (or hang up)
Turn system off ........................#0 (enter again to turn on)
Review announcement ............
Record announcement ............
Turn system on ........................If off, system answers after 10 rings.
Enter your access code, then press
# 0 to turn system on.
5.8 GHz Cordless Telephone/Answering System E5860
ATT-5860CIB-d2.qxd
1/3/2004
11:17 AM
Page 50
www.telephones.att.com
Copyright © 2004 Advanced American Telephones. All Rights Reserved.
AT&T and the Globe Design are trademarks of AT&T Corporation,
licensed to Advanced American Telephones. Printed in China. Issue 1.2 AT&T 01/03/04.
ATT-580-1CIB-d2.qxd
1/17/2004
6:12 PM
Page 1
User Manual (Part 2)
5.8 GHz Expansion
Handset E580-1
For use with AT&T models
E5860 • E5865 • E5900B • E5965C
ATT-580-1CIB-d2.qxd
1/17/2004
You must charge
batteries and register the
handset before use.
6:12 PM
Page 2
STOP!
See pages 2-3
for easy instructions.
For customer service or product
information, visit our web site at
Please also read
www.telephones.att.com
or call 1-800-222-3111.
Enclosed in product package.
Important Product Information
Table of contents
Before you begin........................................1
Parts checklist.............................................1
Battery installation & charging................2
Registering the handset............................3
Belt clip & optional headset ....................4
Quick reference guide..............................5
Copyright © 2004 Advanced American Telephones. All Rights Reserved.
AT&T and the Globe Design are trademarks of AT&T Corp.,
licensed to Advanced American Telephones.
ATT-580-1CIB-d2.qxd
1/17/2004
6:12 PM
Page 1
Before you begin
This cordless telephone operates with
the maximum power allowed by the
Federal Communications Commission
(FCC). Even so, the handset and base
can communicate over only a certain
distance — which can vary with the
locations of the base and handset, the
weather, and the construction of your
home or office. For best performance,
keep the base antenna fully upright.
If you move out of range during a
phone conversation, you might hear
noise or interference. To improve
reception, move closer to the base.
If you move out of range without
pressing OFF, your phone will be left
“off the hook.” To hang up properly,
walk back toward the telephone base,
periodically pressing OFF until the call
is disconnected.
If you receive a call while you are
out of range, the handset might not
ring — or if it does ring, the call might
not connect when you press PHONE.
Move closer to the base, then press
PHONE to answer the call.
Parts checklist
Remember to save your sales receipt and original packaging in case you ever need to
ship your telephone for warranty service. Check to make sure the telephone package
includes the following:
Power
adapter
Telephone
handset
Batteries
Belt clip
Handset charger
1
ATT-580-1CIB-d2.qxd
1/17/2004
6:13 PM
Page 2
Battery installation & charging
After installation, place the handset in the charger and allow batteries to charge for 12
hours before use. You can keep batteries charged by returning the handset to the charger
after each use. When battery power is fully depleted, a full recharge takes about 8 hours.
1
LOW BATTERY
REDIAL
2:10 PM CID LOG
Low battery indicator
Return handset to charger to recharge
when this symbol flashes. (Handset
will beep when battery is low.)
Press coin into slot on
base of handset to
release latch, then
remove battery cover.
To replace battery cover
Insert top
tab first.
Insert supplied
batteries.
Plug power cord into jack on underside
of charger, then plug transformer into
electrical outlet.
Press down to
click in place.
Caution: Use only the supplied
NiMH battery (80-5461-00-00) or
AT&T model 2AA NiMH replacement battery (SKU 26820). Do not
use alkaline batteries.
Place handset in charger to charge
for 12 hours before first use.
Light remains on while batteries
are charging.
2
ATT-580-1CIB-d2.qxd
1/17/2004
6:13 PM
Page 3
Registering the handset
Before using your new handset, you must register it with
the base. During registration, you must enter the 15-digit
ID number of the telephone base. To find this number, go
to the base, press MENU, scroll down to select DISPLAY
BASE ID, then press OK.
MENU
The handset provided with your telephone is automatically
registered as Handset 1. Additional handsets will be
assigned numbers in the order they are registered (2, 3, 4,
etc.) up to a maximum of eight.
CALLS LOG
BASE SETTINGS
DISPLAY BASE-ID
^
OK
V
CALLS LOG
BASE SETTINGS
DISPLAY BASE-ID
^
OK
V
Handset 1
Handset 2
123456789012345
OK
3
Handset 3
ATT-580-1CIB-d2.qxd
1/17/2004
6:14 PM
Page 4
Belt clip & optional headset
Install belt clip as shown below if desired.
For hands-free telephone conversations, you can use any industry standard 2.5 mm
headset (purchased separately). For best results use an AT&T 2.5 mm headset.
Snap belt clip into notches on
side of handset. Rotate and pull
to remove.
Plug 2.5 mm headset
into jack on side of
handset (beneath
small rubber cap).
4
ATT-580-1CIB-d2.qxd
1/17/2004
6:15 PM
Page 5
Quick reference guide
For complete instructions, please refer to the manual provided with your telephone.
Up
Left
Select
Right
Down
Softkeys
NavKey
Press center button to display menus.
Press NavKey buttons to navigate
through menus. Press center button to
select menu item highlighted.
Press a softkey to select a menu item
displayed just above the key.
Off/Cancel
Phone/Flash
Press to begin a call, then dial a number.
During a call, press to hang up.
During a call, press to receive an incoming
call, if Call Waiting is activated.
While using menus, press to cancel an
operation, back up to the previous menu,
or exit the menu display.
Speaker
Sound Select
Press to activate handset speakerphone. Press again to switch call back
to earpiece.
Press to customize speaker sound for
clear speakerphone conversations.
Main menu
Intercom
Directory
Calls Log
Pictures
Sounds & Alerts menu
Vibrate
Ringer Control
Low Batt Tone Keypad Tone
Sounds&Alerts
Settings
Settings menu
Ringers
Clock On/Off
Set Time
Contrast
Range Tone
Phone Setup
Language
Reset Settings
5
ATT-580-1CIB-d2.qxd
1/17/2004
6:15 PM
Page 6
www.telephones.att.com
Copyright © 2004 Advanced American Telephones. All Rights Reserved.
AT&T and the Globe Design are trademarks of AT&T Corp.,
licensed to Advanced American Telephones. Printed in China. Issue 1.2 AT&T 1/19/04.
ATT-580-2CIB-d2.qxd
1/17/2004
6:06 PM
Page 1
User Manual (Part 2)
5.8 GHz Expansion
Handset E580-2
For use with AT&T models
E5860 • E5865 • E5900B • E5965C
ATT-580-2CIB-d2.qxd
1/17/2004
You must charge
batteries and register the
handset before use.
6:06 PM
Page 2
STOP!
See pages 2-3
for easy instructions.
For customer service or product
information, visit our web site at
Please also read
www.telephones.att.com
or call 1-800-222-3111.
Enclosed in product package.
Important Product Information
Table of contents
Before you begin........................................1
Parts checklist.............................................1
Battery installation & charging................2
Registering the handset............................3
Belt clip & optional headset ....................4
Quick reference guide..............................5
Copyright © 2004 Advanced American Telephones. All Rights Reserved.
AT&T and the Globe Design are trademarks of AT&T Corp.,
licensed to Advanced American Telephones.
ATT-580-2CIB-d2.qxd
1/17/2004
6:06 PM
Page 1
Before you begin
This cordless telephone operates with
the maximum power allowed by the
Federal Communications Commission
(FCC). Even so, the handset and base
can communicate over only a certain
distance — which can vary with the
locations of the base and handset, the
weather, and the construction of your
home or office. For best performance,
keep the base antenna fully upright.
If you move out of range during a
phone conversation, you might hear
noise or interference. To improve
reception, move closer to the base.
If you move out of range without
pressing OFF, your phone will be left
“off the hook.” To hang up properly,
walk back toward the telephone base,
periodically pressing OFF until the call
is disconnected.
If you receive a call while you are
out of range, the handset might not
ring — or if it does ring, the call might
not connect when you press PHONE.
Move closer to the base, then press
PHONE to answer the call.
Parts checklist
Remember to save your sales receipt and original packaging in case you ever need to
ship your telephone for warranty service. Check to make sure the telephone package
includes the following:
Power
adapter
Telephone
handset
Batteries
Belt clip
Handset charger
1
ATT-580-2CIB-d2.qxd
1/17/2004
6:07 PM
Page 2
Battery installation & charging
After installation, place the handset in the charger and allow batteries to charge for 12
hours before use. You can keep batteries charged by returning the handset to the charger
after each use. When battery power is fully depleted, a full recharge takes about 8 hours.
1
LOW BATTERY
REDIAL
2:10 PM CID LOG
Low battery indicator
Return handset to charger to recharge
when this symbol flashes. (Handset
will beep when battery is low.)
Press coin into slot on
base of handset to
release latch, then
remove battery cover.
To replace battery cover
Insert top
tab first.
Insert supplied
batteries.
Plug power cord into jack on underside
of charger, then plug transformer into
electrical outlet.
Press down to
click in place.
Caution: Use only the supplied
NiMH battery (80-5461-00-00) or
AT&T model 2AA NiMH replacement battery (SKU 26820). Do not
use alkaline batteries.
Place handset in charger to charge
for 12 hours before first use.
Light remains on while batteries
are charging.
2
ATT-580-2CIB-d2.qxd
1/17/2004
6:08 PM
Page 3
Registering the handset
Before using your new handset, you must register it with
the base. During registration, you must enter the 15-digit
ID number of the telephone base. To find this number, go
to the base, press MENU, scroll down to select DISPLAY
BASE ID, then press OK.
MENU
The handset provided with your telephone is automatically
registered as Handset 1. Additional handsets will be
assigned numbers in the order they are registered (2, 3, 4,
etc.) up to a maximum of eight.
CALLS LOG
BASE SETTINGS
DISPLAY BASE-ID
^
OK
V
CALLS LOG
BASE SETTINGS
DISPLAY BASE-ID
^
OK
V
Handset 1
Handset 2
123456789012345
OK
3
Handset 3
ATT-580-2CIB-d2.qxd
1/17/2004
6:08 PM
Page 4
Belt clip & optional headset
Install belt clip as shown below if desired.
For hands-free telephone conversations, you can use any industry standard 2.5 mm
headset (purchased separately). For best results use an AT&T 2.5 mm headset.
Snap belt clip into notches on
side of handset. Rotate and pull
to remove.
Plug 2.5 mm headset
into jack on side of
handset (beneath
small rubber cap).
4
ATT-580-2CIB-d2.qxd
1/17/2004
6:09 PM
Page 5
Quick reference guide
For complete instructions, please refer to the manual provided with your telephone.
Up
Left
Select
Right
Down
Softkeys
NavKey
Press center button to display menus.
Press NavKey buttons to navigate
through menus. Press center button to
select menu item highlighted.
Press a softkey to select a menu item
displayed just above the key.
Off/Cancel
Phone/Flash
Press to begin a call, then dial a number.
During a call, press to hang up.
During a call, press to receive an incoming
call, if Call Waiting is activated.
While using menus, press to cancel an
operation, back up to the previous menu,
or exit the menu display.
Speaker
Sound Select
Press to activate handset speakerphone. Press again to switch call back
to earpiece.
Press to customize speaker sound for
clear speakerphone conversations.
Main menu
Intercom
Directory
Calls Log
Pictures
Sounds & Alerts menu
Vibrate
Ringer Control
Low Batt Tone Keypad Tone
Sounds&Alerts
Settings
Settings menu
Ringers
Appearance
Set Time
Contrast
Range Tone
Phone Setup
Language
Reset Settings
5
ATT-580-2CIB-d2.qxd
1/17/2004
6:09 PM
Page 6
www.telephones.att.com
Copyright © 2004 Advanced American Telephones. All Rights Reserved.
AT&T and the Globe Design are trademarks of AT&T Corp.,
licensed to Advanced American Telephones. Printed in China. Issue 1.2 AT&T 1/19/04.
Download PDF